debugging testbench

Reviewed-on: #14

.gitignore

@@ -12,4 +12,18 @@
 *.log
 *.rpt
 *.dcp
-.Xil
+*.xpr
+.Xil
+xvlog.pb
+*vivado_pid*
+
+# some generated files (they annoy me)
+update_config.tcl
+create_project.tcl
+gen_ip.tcl
+defines.v
+run_sim.tcl
+*.bit
+*.xsa
+*.ltx
+*.bin

.gitmodules

@@ -0,0 +1,3 @@
+[submodule "external/rtl_libs"]
+	path = external/rtl_libs
+	url = https://git.radiophotonics.ru/baulin.fa/rtl_libs.git

README.md

@@ -1,3 +1,10 @@
 # reflectometer_fpga_project
 
-Проект по разработке аппаратной вычислительной части для отпического рефлектометра для обнаружения утечек.
+Проект по разработке аппаратной вычислительной части для оптического рефлектометра для обнаружения утечек.
+
+## Структура
+- constaints: констрейны под ПЛИСы
+- designs: разные сборные дизайны, включая полный проект
+- rtl: код блоков, в каждой папке есть src и tests
+- scripts: скрипты для сборки 
+- software: программные скрипты

constraints/ax7102.xdc

@@ -0,0 +1,172 @@
+# === iostandard ===
+set_property CFGBVS VCCO [current_design]
+set_property CONFIG_VOLTAGE 3.3 [current_design]
+
+# === SPI flash config ===
+set_property BITSTREAM.CONFIG.SPI_BUSWIDTH 4 [current_design]
+set_property CONFIG_MODE SPIx4 [current_design]
+set_property BITSTREAM.CONFIG.CONFIGRATE 50 [current_design]
+
+# === clock config ===
+create_clock -period 5.000 [get_ports sys_clk_p]
+set_property IOSTANDARD DIFF_SSTL15 [get_ports sys_clk_p]
+set_property PACKAGE_PIN R4 [get_ports sys_clk_p]
+set_property PACKAGE_PIN T4 [get_ports sys_clk_n]
+set_property IOSTANDARD DIFF_SSTL15 [get_ports sys_clk_n]
+
+# === reset button ===
+set_property IOSTANDARD LVCMOS15 [get_ports rst_n]
+set_property PACKAGE_PIN T6 [get_ports rst_n]
+
+# === leds ===
+set_property IOSTANDARD LVCMOS33 [get_ports {led[*]}]
+set_property PACKAGE_PIN C17 [get_ports {led[0]}]
+set_property PACKAGE_PIN D17 [get_ports {led[1]}]
+set_property PACKAGE_PIN V20 [get_ports {led[2]}]
+set_property PACKAGE_PIN U20 [get_ports {led[3]}]
+
+# === 1Gb ethernet PHY ===
+set_property PACKAGE_PIN V10 [get_ports e_mdio]
+set_property IOSTANDARD LVCMOS33 [get_ports e_mdio]
+set_property PACKAGE_PIN W10 [get_ports e_mdc]
+set_property IOSTANDARD LVCMOS33 [get_ports e_mdc]
+set_property PULLTYPE PULLUP [get_ports e_mdc]
+set_property SLEW SLOW [get_ports e_mdio]
+set_property PULLTYPE PULLUP [get_ports e_mdio]
+# eth rx
+create_clock -period 8.000 -name rx_clk [get_ports e_rxc]
+set_property IOSTANDARD LVCMOS33 [get_ports e_rxc]
+set_property PACKAGE_PIN K18 [get_ports e_rxc]
+
+set_property IOSTANDARD LVCMOS33 [get_ports e_rxdv]
+set_property PACKAGE_PIN M22 [get_ports e_rxdv]
+
+set_property IOSTANDARD LVCMOS33 [get_ports e_rxer]
+set_property PACKAGE_PIN N19 [get_ports e_rxer]
+
+set_property IOSTANDARD LVCMOS33 [get_ports {e_rxd[*]}]
+set_property PACKAGE_PIN N22 [get_ports {e_rxd[0]}]
+set_property PACKAGE_PIN H18 [get_ports {e_rxd[1]}]
+set_property PACKAGE_PIN H17 [get_ports {e_rxd[2]}]
+set_property PACKAGE_PIN K19 [get_ports {e_rxd[3]}]
+set_property PACKAGE_PIN M21 [get_ports {e_rxd[4]}]
+set_property PACKAGE_PIN L21 [get_ports {e_rxd[5]}]
+set_property PACKAGE_PIN N20 [get_ports {e_rxd[6]}]
+set_property PACKAGE_PIN M20 [get_ports {e_rxd[7]}]
+
+# eth tx
+set_property IOSTANDARD LVCMOS33 [get_ports e_txc]
+set_property PACKAGE_PIN J17 [get_ports e_txc]
+
+set_property IOSTANDARD LVCMOS33 [get_ports e_gtxc]
+set_property PACKAGE_PIN L18 [get_ports e_gtxc]
+
+set_property IOSTANDARD LVCMOS33 [get_ports e_txen]
+set_property PACKAGE_PIN M16 [get_ports e_txen]
+
+set_property IOSTANDARD LVCMOS33 [get_ports e_txer]
+set_property PACKAGE_PIN M13 [get_ports e_txer]
+
+set_property IOSTANDARD LVCMOS33 [get_ports {e_txd[*]}]
+set_property PACKAGE_PIN M15 [get_ports {e_txd[0]}]
+set_property PACKAGE_PIN L14 [get_ports {e_txd[1]}]
+set_property PACKAGE_PIN K16 [get_ports {e_txd[2]}]
+set_property PACKAGE_PIN L16 [get_ports {e_txd[3]}]
+set_property PACKAGE_PIN K17 [get_ports {e_txd[4]}]
+set_property PACKAGE_PIN L20 [get_ports {e_txd[5]}]
+set_property PACKAGE_PIN L19 [get_ports {e_txd[6]}]
+set_property PACKAGE_PIN L13 [get_ports {e_txd[7]}]
+
+set_property IOSTANDARD LVCMOS33 [get_ports e_reset]
+set_property PACKAGE_PIN L15 [get_ports e_reset]
+
+create_clock -period 8.000 -name tx_clk [get_ports e_gtxc]
+
+set_false_path -reset_path -from [get_clocks sys_clk_p] -to [get_clocks rx_clk]
+
+# === ADC an9238 (J4 header) ===
+set_property PACKAGE_PIN K14 [get_ports ch2_clk]
+set_property PACKAGE_PIN K13 [get_ports {ch2_data[0]}]
+set_property PACKAGE_PIN H14 [get_ports {ch2_data[1]}]
+set_property PACKAGE_PIN J14 [get_ports {ch2_data[2]}]
+set_property PACKAGE_PIN H15 [get_ports {ch2_data[3]}]
+set_property PACKAGE_PIN J15 [get_ports {ch2_data[4]}]
+set_property PACKAGE_PIN G13 [get_ports {ch2_data[5]}]
+set_property PACKAGE_PIN H13 [get_ports {ch2_data[6]}]
+set_property PACKAGE_PIN J21 [get_ports {ch2_data[7]}]
+set_property PACKAGE_PIN J20 [get_ports {ch2_data[8]}]
+set_property PACKAGE_PIN G16 [get_ports {ch2_data[9]}]
+set_property PACKAGE_PIN G15 [get_ports {ch2_data[10]}]
+set_property PACKAGE_PIN H19 [get_ports {ch2_data[11]}]
+set_property PACKAGE_PIN J19 [get_ports ch2_otr]
+
+set_property PACKAGE_PIN J16 [get_ports ch1_data[1]]
+set_property PACKAGE_PIN F15 [get_ports ch1_data[0]]
+set_property PACKAGE_PIN K22 [get_ports ch1_data[3]]
+set_property PACKAGE_PIN K21 [get_ports ch1_data[2]]
+set_property PACKAGE_PIN H22 [get_ports ch1_data[5]]
+set_property PACKAGE_PIN J22 [get_ports ch1_data[4]]
+set_property PACKAGE_PIN G20 [get_ports ch1_data[7]]
+set_property PACKAGE_PIN H20 [get_ports ch1_data[6]]
+set_property PACKAGE_PIN G22 [get_ports ch1_data[9]]
+set_property PACKAGE_PIN G21 [get_ports ch1_data[8]]
+set_property PACKAGE_PIN D22 [get_ports ch1_data[11]]
+set_property PACKAGE_PIN E22 [get_ports ch1_data[10]]
+set_property PACKAGE_PIN D21 [get_ports ch1_clk]
+set_property PACKAGE_PIN E21 [get_ports ch1_otr]
+
+set_property IOSTANDARD LVCMOS33 [get_ports ch2_clk]
+set_property IOSTANDARD LVCMOS33 [get_ports {ch2_data[*]}]
+set_property IOSTANDARD LVCMOS33 [get_ports ch2_otr]
+set_property IOSTANDARD LVCMOS33 [get_ports {ch1_data[*]}]
+set_property IOSTANDARD LVCMOS33 [get_ports ch1_clk]
+set_property IOSTANDARD LVCMOS33 [get_ports ch1_otr]
+
+set_property SLEW FAST [get_ports ch2_clk]
+
+
+
+# === DAC an9767(J5 header) ===
+set_property PACKAGE_PIN F13  [get_ports {da1_clk}]
+set_property PACKAGE_PIN F14  [get_ports {da1_wrt}]
+set_property PACKAGE_PIN AB15 [get_ports {da1_data[13]}]
+set_property PACKAGE_PIN AA15 [get_ports {da1_data[12]}]
+set_property PACKAGE_PIN AA14 [get_ports {da1_data[11]}]
+set_property PACKAGE_PIN Y13  [get_ports {da1_data[10]}]
+set_property PACKAGE_PIN AB17 [get_ports {da1_data[9]}]
+set_property PACKAGE_PIN AB16 [get_ports {da1_data[8]}]
+set_property PACKAGE_PIN AA16 [get_ports {da1_data[7]}]
+set_property PACKAGE_PIN Y16  [get_ports {da1_data[6]}]
+set_property PACKAGE_PIN AB12 [get_ports {da1_data[5]}]
+set_property PACKAGE_PIN AB11 [get_ports {da1_data[4]}]
+set_property PACKAGE_PIN Y14  [get_ports {da1_data[3]}]
+set_property PACKAGE_PIN W14  [get_ports {da1_data[2]}]
+set_property PACKAGE_PIN C19  [get_ports {da1_data[1]}]
+set_property PACKAGE_PIN C18  [get_ports {da1_data[0]}]
+
+set_property IOSTANDARD LVCMOS33 [get_ports {da1_data[*]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {da1_wrt}]
+set_property IOSTANDARD LVCMOS33 [get_ports {da1_clk}]
+
+set_property PACKAGE_PIN E14 [get_ports da2_clk]
+set_property PACKAGE_PIN E13 [get_ports da2_wrt]
+set_property PACKAGE_PIN D15 [get_ports {da2_data[13]}]
+set_property PACKAGE_PIN D14 [get_ports {da2_data[12]}]
+set_property PACKAGE_PIN B13 [get_ports {da2_data[11]}]
+set_property PACKAGE_PIN C13 [get_ports {da2_data[10]}]
+set_property PACKAGE_PIN AB13 [get_ports {da2_data[9]}]
+set_property PACKAGE_PIN AA13 [get_ports {da2_data[8]}]
+set_property PACKAGE_PIN A19 [get_ports {da2_data[7]}]
+set_property PACKAGE_PIN A18 [get_ports {da2_data[6]}]
+set_property PACKAGE_PIN E18 [get_ports {da2_data[5]}]
+set_property PACKAGE_PIN F18 [get_ports {da2_data[4]}]
+set_property PACKAGE_PIN F20 [get_ports {da2_data[3]}]
+set_property PACKAGE_PIN F19 [get_ports {da2_data[2]}]
+set_property PACKAGE_PIN A20 [get_ports {da2_data[1]}]
+set_property PACKAGE_PIN B20 [get_ports {da2_data[0]}]
+
+set_property IOSTANDARD LVCMOS33 [get_ports da2_clk]
+set_property IOSTANDARD LVCMOS33 [get_ports da2_wrt]
+set_property IOSTANDARD LVCMOS33 [get_ports {da2_data[*]}]
+
+

constraints/ax7a035b.xdc

@@ -58,20 +58,57 @@ set_property SLEW FAST [get_ports rgmii_txctl]
 set_property SLEW FAST [get_ports {rgmii_txd[*]}]
 create_clock -period 8.000 [get_ports rgmii_rxc]
 
+# === DAC (J11 header) ===
+#set_property IOSTANDARD LVCMOS33 [get_ports p2_clk]
+#set_property IOSTANDARD LVCMOS33 [get_ports p2_wrt]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[13]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[12]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[11]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[10]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[9]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[8]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[7]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[6]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[5]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[4]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[3]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[2]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[1]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[0]}]
+
+#set_property SLEW FAST [get_ports p2_clk]
+
+#set_property PACKAGE_PIN C18 [get_ports p2_clk]
+#set_property PACKAGE_PIN C19 [get_ports p2_wrt]
+#set_property PACKAGE_PIN B17 [get_ports {p2_data[13]}]
+#set_property PACKAGE_PIN B18 [get_ports {p2_data[12]}]
+#set_property PACKAGE_PIN D17 [get_ports {p2_data[11]}]
+#set_property PACKAGE_PIN C17 [get_ports {p2_data[10]}]
+#set_property PACKAGE_PIN A15 [get_ports {p2_data[9]}]
+#set_property PACKAGE_PIN A16 [get_ports {p2_data[8]}]
+#set_property PACKAGE_PIN B15 [get_ports {p2_data[7]}]
+#set_property PACKAGE_PIN B16 [get_ports {p2_data[6]}]
+#set_property PACKAGE_PIN A13 [get_ports {p2_data[5]}]
+#set_property PACKAGE_PIN A14 [get_ports {p2_data[4]}]
+#set_property PACKAGE_PIN E16 [get_ports {p2_data[3]}]
+#set_property PACKAGE_PIN D16 [get_ports {p2_data[2]}]
+#set_property PACKAGE_PIN C14 [get_ports {p2_data[1]}]
+#set_property PACKAGE_PIN C15 [get_ports {p2_data[0]}]
+
 # === ADC an9238 (J11 header) ===
 set_property PACKAGE_PIN G21 [get_ports ch2_clk]
-set_property PACKAGE_PIN G22 [get_ports ch2_data[0]]
-set_property PACKAGE_PIN C22 [get_ports ch2_data[1]]
-set_property PACKAGE_PIN B22 [get_ports ch2_data[2]]
-set_property PACKAGE_PIN F19 [get_ports ch2_data[3]]
-set_property PACKAGE_PIN F20 [get_ports ch2_data[4]]
-set_property PACKAGE_PIN D20 [get_ports ch2_data[5]]
-set_property PACKAGE_PIN C20 [get_ports ch2_data[6]]
-set_property PACKAGE_PIN A18 [get_ports ch2_data[7]]
-set_property PACKAGE_PIN A19 [get_ports ch2_data[8]]
-set_property PACKAGE_PIN B20 [get_ports ch2_data[9]]
-set_property PACKAGE_PIN A20 [get_ports ch2_data[10]]
-set_property PACKAGE_PIN F18 [get_ports ch2_data[11]]
+set_property PACKAGE_PIN G22 [get_ports {ch2_data[0]}]
+set_property PACKAGE_PIN C22 [get_ports {ch2_data[1]}]
+set_property PACKAGE_PIN B22 [get_ports {ch2_data[2]}]
+set_property PACKAGE_PIN F19 [get_ports {ch2_data[3]}]
+set_property PACKAGE_PIN F20 [get_ports {ch2_data[4]}]
+set_property PACKAGE_PIN D20 [get_ports {ch2_data[5]}]
+set_property PACKAGE_PIN C20 [get_ports {ch2_data[6]}]
+set_property PACKAGE_PIN A18 [get_ports {ch2_data[7]}]
+set_property PACKAGE_PIN A19 [get_ports {ch2_data[8]}]
+set_property PACKAGE_PIN B20 [get_ports {ch2_data[9]}]
+set_property PACKAGE_PIN A20 [get_ports {ch2_data[10]}]
+set_property PACKAGE_PIN F18 [get_ports {ch2_data[11]}]
 set_property PACKAGE_PIN E18 [get_ports ch2_otr]
 set_property PACKAGE_PIN C18 [get_ports ch1_data[1]]
 set_property PACKAGE_PIN C19 [get_ports ch1_data[0]]
@@ -95,30 +132,9 @@ set_property IOSTANDARD LVCMOS33 [get_ports {ch1_data[*]}]
 set_property IOSTANDARD LVCMOS33 [get_ports ch1_clk]
 set_property IOSTANDARD LVCMOS33 [get_ports ch1_otr]
 
-set_property SLEW FAST [get_ports {ch2_clk ch1_clk}]
-
-# === DAC an9767 (J13 header) ===
-set_property PACKAGE_PIN AA9 [get_ports p2_clk]
-set_property PACKAGE_PIN AB10 [get_ports p2_wrt]
-set_property PACKAGE_PIN U16 [get_ports p2_data[13]]
-set_property PACKAGE_PIN T16 [get_ports p2_data[12]]
-set_property PACKAGE_PIN AA13 [get_ports p2_data[11]]
-set_property PACKAGE_PIN AB13 [get_ports p2_data[10]]
-set_property PACKAGE_PIN AB11 [get_ports p2_data[9]]
-set_property PACKAGE_PIN AB12 [get_ports p2_data[8]]
-set_property PACKAGE_PIN Y13 [get_ports p2_data[7]]
-set_property PACKAGE_PIN AA14 [get_ports p2_data[6]]
-set_property PACKAGE_PIN W14 [get_ports p2_data[5]]
-set_property PACKAGE_PIN Y14 [get_ports p2_data[4]]
-set_property PACKAGE_PIN Y16 [get_ports p2_data[3]]
-set_property PACKAGE_PIN AA16 [get_ports p2_data[2]]
-set_property PACKAGE_PIN AB16 [get_ports p2_data[1]]
-set_property PACKAGE_PIN AB17 [get_ports p2_data[0]]
-
-set_property IOSTANDARD LVCMOS33 [get_ports p2_clk]
-set_property IOSTANDARD LVCMOS33 [get_ports p2_wrt]
-set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[*]}]
-
-set_property SLEW FAST [get_ports {p2_clk}]
+# 1 bit DAC)))
+set_property PACKAGE_PIN E17 [get_ports debug_dac]
+set_property IOSTANDARD LVCMOS33 [get_ports debug_dac]
+
 
 

designs/README.md

@@ -0,0 +1,5 @@
+# Директория с тестовыми проектами под ПЛИСу
+
+- adc_dac_synchronizer: проект для тестирования и отладки связки сэмплер + контроллер + генератор, проверки синхронизации между импульсами.
+- reflectometer_base: базовый проект рефлектометра без внешних интерфейсов, только I/O через AXI Stream.
+- reflectometer_prototype: тестовый проект под AX7102 с управлением и отправкой данных по ethernet.

designs/adc_dac_synchoronizer/Makefile

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: MIT
+#
+# Copyright (c) 2025 FPGA Ninja, LLC
+#
+# Authors:
+# - Alex Forencich
+#
+
+# FPGA settings
+FPGA_PART = xc7a100tfgg484-2
+FPGA_TOP = sync_top
+FPGA_ARCH = artix7
+
+RTL_DIR = ../../rtl
+
+
+include ../../scripts/vivado.mk
+
+
+SYN_FILES += $(sort $(shell find ../../rtl/sampler/src -type f -name '*.sv'))
+SYN_FILES += $(sort $(shell find ../../rtl/generator/src -type f -name '*.sv'))
+SYN_FILES += sync_top.sv
+
+XCI_FILES += $(sort $(shell find ip/ -type f -name '*.xci'))
+
+XDC_FILES += ../../constraints/ax7102.xdc
+XDC_FILES += debug.xdc
+
+SYN_FILES += tb_sync_top.sv
+SIM_TOP = tb_top
+
+
+
+program: $(PROJECT).bit
+	echo "open_hw_manager" > program.tcl
+	echo "connect_hw_server" >> program.tcl
+	echo "open_hw_target" >> program.tcl
+	echo "current_hw_device [lindex [get_hw_devices] 0]" >> program.tcl
+	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> program.tcl
+	echo "set_property PROGRAM.FILE {$(PROJECT).bit} [current_hw_device]" >> program.tcl
+	echo "program_hw_devices [current_hw_device]" >> program.tcl
+	echo "exit" >> program.tcl
+	vivado -nojournal -nolog -mode batch -source program.tcl
+
+$(PROJECT).mcs $(PROJECT).prm: $(PROJECT).bit
+	echo "write_cfgmem -force -format mcs -size 16 -interface SPIx4 -loadbit {up 0x0000000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
+	echo "exit" >> generate_mcs.tcl
+	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
+	mkdir -p rev
+	COUNT=100; \
+	while [ -e rev/$*_rev$$COUNT.bit ]; \
+	do COUNT=$$((COUNT+1)); done; \
+	COUNT=$$((COUNT-1)); \
+	for x in .mcs .prm; \
+	do cp $*$$x rev/$*_rev$$COUNT$$x; \
+	echo "Output: rev/$*_rev$$COUNT$$x"; done;

designs/adc_dac_synchoronizer/debug.xdc

@@ -0,0 +1,10 @@
+# Primary clocks
+create_clock -name eth_clk -period 8.000  [get_ports dac_clk_in]
+create_clock -name acc_clk -period 15.385  [get_ports adc_clk_in]
+
+
+# Asynchronous clock groups
+
+set_clock_groups -name ASYNC_ETH_ACC -asynchronous \
+    -group [get_clocks eth_clk] \
+    -group [get_clocks acc_clk]

designs/adc_dac_synchoronizer/sync_top.sv

@@ -0,0 +1,136 @@
+`timescale 1ns / 1ps
+
+module sync_top
+#(
+    parameter int unsigned DAC_DATA_WIDTH = 14,
+    parameter int unsigned ADC_DATA_WIDTH = 12,
+    parameter int unsigned PACK_FACTOR    = 1,
+    parameter int unsigned PROCESS_MODE   = 0
+)
+(
+    input  adc_clk_in,
+    input  adc_rst,
+
+    input  dac_clk_in,
+    input  dac_rst,
+
+    input  dac_start,
+
+    input  [31:0]                 pulse_width,
+    input  [31:0]                 pulse_period,
+    input  [DAC_DATA_WIDTH-1:0]   pulse_height,
+    input  [15:0]                 pulse_num,
+    input  [31:0]                 smp_num,
+
+    output logic [ADC_DATA_WIDTH*PACK_FACTOR-1:0] m_axis_tdata,
+    output logic                                  m_axis_tvalid
+);
+
+    //------------------------------------------------------------
+    // Internal signals
+    //------------------------------------------------------------
+
+   (* MARK_DEBUG="true" *) logic sample_req;
+   (* MARK_DEBUG="true" *) logic sample_req_sync1;
+   (* MARK_DEBUG="true" *) logic sample_req_sync2;
+   (* MARK_DEBUG="true" *) logic sample_req_sync3;
+
+   (* MARK_DEBUG="true" *) logic sample_done;
+   (* MARK_DEBUG="true" *) logic sample_done_sync1;
+   (* MARK_DEBUG="true" *) logic sample_done_sync2;
+   (* MARK_DEBUG="true" *) logic sample_done_sync3;
+
+   (* MARK_DEBUG="true" *) logic pulse;
+   (* MARK_DEBUG="true" *) logic [DAC_DATA_WIDTH-1:0] pulse_height_out;
+
+    //------------------------------------------------------------
+    // Simple DAC -> ADC test source
+    //
+    // generator output is directly connected to sampler input
+    // with width truncation:
+    //
+    // pulse_height_out[13:0] -> data_in[11:0]
+    //------------------------------------------------------------
+  (* MARK_DEBUG="true" *)  logic [ADC_DATA_WIDTH-1:0] data_in;
+  (* MARK_DEBUG="true" *)  logic out_of_range;
+
+    assign data_in      = pulse_height_out[ADC_DATA_WIDTH-1:0];
+    assign out_of_range = 1'b0;
+
+    //------------------------------------------------------------
+    // DAC -> ADC CDC
+    //------------------------------------------------------------
+    always_ff @(posedge adc_clk_in or posedge adc_rst) begin
+        if (adc_rst) begin
+            sample_req <= 1'b0;
+            sample_req_sync2  <= 1'b0;
+            sample_req_sync3 <= 1'b0;
+        end
+        else begin
+            sample_req_sync2 <= sample_req_sync1;
+            sample_req_sync3  <= sample_req_sync2;
+            sample_req <= sample_req_sync3;
+        end
+    end
+
+    //------------------------------------------------------------
+    // ADC -> DAC CDC
+    //------------------------------------------------------------
+    always_ff @(posedge dac_clk_in or posedge dac_rst) begin
+        if (dac_rst) begin
+            sample_done <= 1'b0;
+            sample_done_sync2 <= 1'b0;
+            sample_done_sync3 <= 1'b0;
+        end
+        else begin
+            sample_done_sync2 <= sample_done_sync1;
+            sample_done_sync3 <= sample_done_sync2;
+            sample_done <= sample_done_sync3;
+        end
+    end
+
+    //------------------------------------------------------------
+    // Generator
+    //------------------------------------------------------------
+    generator #(
+        .DATA_WIDTH(DAC_DATA_WIDTH)
+    ) generator_inst (
+        .clk_in(dac_clk_in),
+        .rst(dac_rst),
+        .start(dac_start),
+
+        .pulse_width(pulse_width),
+        .pulse_period(pulse_period),
+        .pulse_height(pulse_height),
+        .pulse_num(pulse_num),
+
+        .sample_done(sample_done),
+
+        .pulse(pulse),
+        .pulse_height_out(pulse_height_out),
+        .sample_req(sample_req_sync1)
+    );
+
+    //------------------------------------------------------------
+    // Sampler
+    //------------------------------------------------------------
+    sampler #(
+        .DATA_WIDTH(ADC_DATA_WIDTH),
+        .PACK_FACTOR(PACK_FACTOR),
+        .PROCESS_MODE(PROCESS_MODE)
+    ) sampler_inst (
+        .clk_in(adc_clk_in),
+        .rst(adc_rst),
+
+        .data_in(data_in),
+        .out_of_range(out_of_range),
+
+        .smp_num(smp_num),
+        .sample_req(sample_req),
+
+        .m_axis_tdata(m_axis_tdata),
+        .m_axis_tvalid(m_axis_tvalid),
+        .sample_done(sample_done_sync1)
+    );
+
+endmodule

designs/adc_dac_synchoronizer/tb_sync_top.sv

@@ -0,0 +1,169 @@
+`timescale 1ns / 1ps
+
+module tb_top;
+
+    localparam DAC_DATA_WIDTH = 14;
+    localparam ADC_DATA_WIDTH = 12;
+    localparam PACK_FACTOR    = 1;
+    localparam PROCESS_MODE   = 0;
+
+    //------------------------------------------------------------
+    // clocks / reset
+    //------------------------------------------------------------
+    logic adc_clk_in;
+    logic adc_rst;
+
+    logic dac_clk_in;
+    logic dac_rst;
+
+    //------------------------------------------------------------
+    // control
+    //------------------------------------------------------------
+    logic dac_start;
+
+    logic [31:0] pulse_width;
+    logic [31:0] pulse_period;
+    logic [DAC_DATA_WIDTH-1:0] pulse_height;
+    logic [15:0] pulse_num;
+    logic [31:0] smp_num;
+
+    //------------------------------------------------------------
+    // outputs
+    //------------------------------------------------------------
+    logic [ADC_DATA_WIDTH*PACK_FACTOR-1:0] m_axis_tdata;
+    logic                                  m_axis_tvalid;
+
+    integer valid_count;
+
+    //------------------------------------------------------------
+    // DUT
+    //------------------------------------------------------------
+    sync_top #(
+        .DAC_DATA_WIDTH(DAC_DATA_WIDTH),
+        .ADC_DATA_WIDTH(ADC_DATA_WIDTH),
+        .PACK_FACTOR(PACK_FACTOR),
+        .PROCESS_MODE(PROCESS_MODE)
+    ) dut (
+        .adc_clk_in(adc_clk_in),
+        .adc_rst(adc_rst),
+
+        .dac_clk_in(dac_clk_in),
+        .dac_rst(dac_rst),
+
+        .dac_start(dac_start),
+
+        .pulse_width(pulse_width),
+        .pulse_period(pulse_period),
+        .pulse_height(pulse_height),
+        .pulse_num(pulse_num),
+        .smp_num(smp_num),
+
+        .m_axis_tdata(m_axis_tdata),
+        .m_axis_tvalid(m_axis_tvalid)
+    );
+
+    //------------------------------------------------------------
+    // ADC clock
+    //------------------------------------------------------------
+    initial begin
+        adc_clk_in = 1'b0;
+        forever #5 adc_clk_in = ~adc_clk_in;   // 100 MHz
+    end
+
+    //------------------------------------------------------------
+    // DAC clock
+    //------------------------------------------------------------
+    initial begin
+        dac_clk_in = 1'b0;
+        forever #8 dac_clk_in = ~dac_clk_in;   // slower domain
+    end
+
+    //------------------------------------------------------------
+    // monitor output stream
+    //------------------------------------------------------------
+    always @(posedge adc_clk_in) begin
+        if (m_axis_tvalid) begin
+            valid_count = valid_count + 1;
+
+            $display("[%0t] VALID: data=%0d",
+                     $time,
+                     m_axis_tdata);
+        end
+    end
+
+    //------------------------------------------------------------
+    // test
+    //------------------------------------------------------------
+    initial begin
+
+        adc_rst      = 1'b1;
+        dac_rst      = 1'b1;
+
+        dac_start    = 1'b0;
+
+        pulse_width  = 0;
+        pulse_period = 0;
+        pulse_height = 0;
+        pulse_num    = 0;
+        smp_num      = 0;
+
+        valid_count  = 0;
+
+        //--------------------------------------------------------
+        // reset
+        //--------------------------------------------------------
+        repeat (10) @(posedge adc_clk_in);
+        repeat (10) @(posedge dac_clk_in);
+
+        adc_rst = 1'b0;
+        dac_rst = 1'b0;
+
+        repeat (5) @(posedge dac_clk_in);
+
+        //--------------------------------------------------------
+        // config
+        //--------------------------------------------------------
+        pulse_width  = 32'd3;
+        pulse_period = 32'd8;
+        pulse_height = 14'd200;
+        pulse_num    = 16'd4;
+        smp_num      = 32'd8;
+
+        //--------------------------------------------------------
+        // start
+        //--------------------------------------------------------
+        @(posedge dac_clk_in);
+        dac_start = 1'b1;
+
+        @(posedge dac_clk_in);
+        dac_start = 1'b0;
+
+        $display("==================================");
+        $display("TEST START");
+        $display("==================================");
+
+        //--------------------------------------------------------
+        // wait
+        //--------------------------------------------------------
+        repeat (600) @(posedge adc_clk_in);
+
+        //--------------------------------------------------------
+        // check
+        //--------------------------------------------------------
+        if (valid_count > 0) begin
+            $display("==================================");
+            $display("TEST PASSED");
+            $display("valid_count = %0d", valid_count);
+            $display("==================================");
+        end
+        else begin
+            $display("==================================");
+            $display("TEST FAILED");
+            $display("No valid output detected");
+            $display("==================================");
+        end
+
+        $finish;
+    end
+
+endmodule

designs/controller_dma_connective/src/axi_dma_wrapper_if.sv

@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: MIT
+//
+// SystemVerilog interface wrapper around alexforencich/verilog-axi axi_dma.v.
+//
+// AXI memory, AXI-Stream data, DMA descriptor, and DMA status channels are all
+// exposed through compact interfaces. The original Forencich core remains
+// untouched and is connected through local flat wires.
+
+`default_nettype none
+import dma_reg_pkg::*;
+
+// DMA Specific wrappers & converters
+module axi_dma_wrapper #(
+  parameter int unsigned AXI_DATA_WIDTH     = 32,
+
+  parameter int unsigned AXI_STRB_WIDTH     = AXI_DATA_WIDTH / 8,
+  parameter int unsigned AXI_ID_WIDTH       = 8,
+  parameter int unsigned AXI_USER_WIDTH     = 1,
+  parameter int unsigned AXI_MAX_BURST_LEN  = 16,
+
+  parameter int unsigned AXIS_DATA_WIDTH    = AXI_DATA_WIDTH,
+  parameter int unsigned AXIS_KEEP_ENABLE   = AXIS_DATA_WIDTH > 8,
+  parameter int unsigned AXIS_KEEP_WIDTH    = AXIS_DATA_WIDTH / 8,
+  parameter int unsigned AXIS_LAST_ENABLE   = 1,
+  parameter int unsigned AXIS_ID_ENABLE     = 1,
+  parameter int unsigned AXIS_DEST_ENABLE   = 0,
+  parameter int unsigned AXIS_USER_ENABLE   = 1,
+
+  parameter int unsigned ENABLE_SG          = 0,
+  parameter int unsigned ENABLE_UNALIGNED   = 0
+)(
+  input  logic clk,
+  input  logic rst,
+
+  axis_if.slave     s_axis_read_desc,
+
+  axis_if.master    m_axis_read_desc_status,
+
+  axis_if.master    m_axis_read_data,
+
+  axis_if.slave     s_axis_write_desc,
+
+  axis_if.master    m_axis_write_desc_status,
+
+  axis_if.slave     s_axis_write_data,
+
+  axi4_if.master    m_axi
+);
+
+  dma_read_desc_t read_desc;
+  assign read_desc = dma_read_desc_t'(s_axis_read_desc.req.t.data);
+
+
+  dma_write_desc_t write_desc;
+  assign write_desc = dma_write_desc_t'(s_axis_write_desc.req.t.data);
+
+
+  dma_read_status_t read_status;
+  assign m_axis_read_desc_status.req.t.data = read_status;
+  logic m_axis_read_desc_status_valid;
+  assign m_axis_read_desc_status.req.t.valid = m_axis_read_desc_status_valid;
+
+
+
+  dma_write_status_t write_status;  
+  assign m_axis_write_desc_status.req.t.data = write_status;
+  logic m_axis_write_desc_status_valid;
+  assign m_axis_write_desc_status.req.t.valid = m_axis_write_desc_status_valid;
+
+
+  // Original DMA: flat ports only.
+  axi_dma #(
+    .AXI_DATA_WIDTH    (AXI_DATA_WIDTH),
+    .AXI_ADDR_WIDTH    (dma_reg_pkg::AXI_ADDR_WIDTH),
+    .AXI_STRB_WIDTH    (AXI_STRB_WIDTH),
+    .AXI_ID_WIDTH      (AXI_ID_WIDTH),
+    .AXI_MAX_BURST_LEN (AXI_MAX_BURST_LEN),
+    .AXIS_DATA_WIDTH   (AXIS_DATA_WIDTH),
+    .AXIS_KEEP_ENABLE  (AXIS_KEEP_ENABLE),
+    .AXIS_KEEP_WIDTH   (AXIS_KEEP_WIDTH),
+    .AXIS_LAST_ENABLE  (AXIS_LAST_ENABLE),
+    .AXIS_ID_ENABLE    (AXIS_ID_ENABLE),
+    .AXIS_ID_WIDTH     (dma_reg_pkg::AXIS_ID_WIDTH),
+    .AXIS_DEST_ENABLE  (AXIS_DEST_ENABLE),
+    .AXIS_DEST_WIDTH   (dma_reg_pkg::AXIS_DEST_WIDTH),
+    .AXIS_USER_ENABLE  (AXIS_USER_ENABLE),
+    .AXIS_USER_WIDTH   (dma_reg_pkg::AXIS_USER_WIDTH),
+    .LEN_WIDTH         (dma_reg_pkg::LEN_WIDTH),
+    .TAG_WIDTH         (dma_reg_pkg::TAG_WIDTH),
+    .ENABLE_SG         (ENABLE_SG),
+    .ENABLE_UNALIGNED  (ENABLE_UNALIGNED)
+  ) i_axi_dma (
+    .clk                              (clk),
+    .rst                              (rst),
+
+    .s_axis_read_desc_addr            (read_desc.addr),
+    .s_axis_read_desc_len             (read_desc.len),
+    .s_axis_read_desc_tag             (read_desc.tag),
+    .s_axis_read_desc_id              (read_desc.id),
+    .s_axis_read_desc_dest            (read_desc.dest),
+    .s_axis_read_desc_user            (read_desc.user),
+    .s_axis_read_desc_valid           (s_axis_read_desc.req.t.valid),
+    .s_axis_read_desc_ready           (s_axis_read_desc.resp.ready),
+
+    .m_axis_read_desc_status_tag      (read_status.tag),
+    .m_axis_read_desc_status_error    (read_status.error),
+    .m_axis_read_desc_status_valid    (m_axis_read_desc_status_valid),
+
+    .m_axis_read_data_tdata           (m_axis_read_data.req.t.data),
+    .m_axis_read_data_tkeep           (m_axis_read_data.req.t.keep),
+    .m_axis_read_data_tvalid          (m_axis_read_data.req.t.valid),
+    .m_axis_read_data_tready          (m_axis_read_data.resp.ready),
+    .m_axis_read_data_tlast           (m_axis_read_data.req.t.last),
+    .m_axis_read_data_tid             (m_axis_read_data.req.t.id),
+    .m_axis_read_data_tdest           (m_axis_read_data.req.t.dest),
+    .m_axis_read_data_tuser           (m_axis_read_data.req.t.user),
+
+    .s_axis_write_desc_addr           (write_desc.addr),
+    .s_axis_write_desc_len            (write_desc.len),
+    .s_axis_write_desc_tag            (write_desc.tag),
+    .s_axis_write_desc_valid          (s_axis_write_desc.req.t.valid),
+    .s_axis_write_desc_ready          (s_axis_write_desc.resp.ready),
+
+    .m_axis_write_desc_status_len     (write_status.len),
+    .m_axis_write_desc_status_tag     (write_status.tag),
+    .m_axis_write_desc_status_id      (write_status.id),
+    .m_axis_write_desc_status_dest    (write_status.dest),
+    .m_axis_write_desc_status_user    (write_status.user),
+    .m_axis_write_desc_status_error   (write_status.error),
+    .m_axis_write_desc_status_valid   (m_axis_write_desc_status_valid),
+
+    .s_axis_write_data_tdata          (s_axis_write_data.req.t.data),
+    .s_axis_write_data_tkeep          (s_axis_write_data.req.t.keep),
+    .s_axis_write_data_tvalid         (s_axis_write_data.req.t.valid),
+    .s_axis_write_data_tready         (s_axis_write_data.resp.ready),
+    .s_axis_write_data_tlast          (s_axis_write_data.req.t.last),
+    .s_axis_write_data_tid            (s_axis_write_data.req.t.id),
+    .s_axis_write_data_tdest          (s_axis_write_data.req.t.dest),
+    .s_axis_write_data_tuser          (s_axis_write_data.req.t.user),
+
+    .m_axi_awid                       (m_axi.req.aw.id),
+    .m_axi_awaddr                     (m_axi.req.aw.addr),
+    .m_axi_awlen                      (m_axi.req.aw.len),
+    .m_axi_awsize                     (m_axi.req.aw.size),
+    .m_axi_awburst                    (m_axi.req.aw.burst),
+    .m_axi_awlock                     (m_axi.req.aw.lock),
+    .m_axi_awcache                    (m_axi.req.aw.cache),
+    .m_axi_awprot                     (m_axi.req.aw.prot),
+    .m_axi_awvalid                    (m_axi.req.aw.valid),
+    .m_axi_awready                    (m_axi.resp.aw_ready),
+
+    .m_axi_wdata                      (m_axi.req.w.data),
+    .m_axi_wstrb                      (m_axi.req.w.strb),
+    .m_axi_wlast                      ( m_axi.req.w.last),
+    .m_axi_wvalid                     (m_axi.req.w.valid),
+    .m_axi_wready                     (m_axi.resp.w_ready),
+
+    .m_axi_bid                        (m_axi.resp.b.id),
+    .m_axi_bresp                      (m_axi.resp.b.resp),
+    .m_axi_bvalid                     (m_axi.resp.b.valid),
+    .m_axi_bready                     (m_axi.req.b_ready),
+
+    .m_axi_arid                       (m_axi.req.ar.id),
+    .m_axi_araddr                     (m_axi.req.ar.addr),
+    .m_axi_arlen                      (m_axi.req.ar.len),
+    .m_axi_arsize                     (m_axi.req.ar.size),
+    .m_axi_arburst                    (m_axi.req.ar.burst),
+    .m_axi_arlock                     (m_axi.req.ar.lock),
+    .m_axi_arcache                    (m_axi.req.ar.cache),
+    .m_axi_arprot                     (m_axi.req.ar.prot),
+    .m_axi_arvalid                    (m_axi.req.ar.valid),
+    .m_axi_arready                    (m_axi.resp.ar_ready),
+
+    .m_axi_rid                        (m_axi.resp.r.id),
+    .m_axi_rdata                      (m_axi.resp.r.data),
+    .m_axi_rresp                      (m_axi.resp.r.resp),
+    .m_axi_rlast                      (m_axi.resp.r.last),
+    .m_axi_rvalid                     (m_axi.resp.r.valid),
+    .m_axi_rready                     (m_axi.req.r_ready),
+
+    .read_enable                      (1'b1),
+    .write_enable                     (1'b1),
+    .write_abort                      (1'b0)
+  );
+
+
+endmodule : axi_dma_wrapper
+
+`default_nettype wire

designs/controller_dma_connective/src/wrapper_controller_dma.sv

@@ -0,0 +1,169 @@
+import dma_reg_pkg::*;
+
+module wrapper_controller_dma 
+#(
+    parameter int unsigned ADDR_W             = 16,
+    parameter int unsigned DATA_W             = 32,
+    parameter int unsigned USER_W             = 1,
+
+    parameter int unsigned DAC_DATA_WIDTH     = 12,
+
+    parameter int unsigned AXI_DATA_WIDTH     = 32,
+
+    parameter int unsigned AXI_STRB_WIDTH     = AXI_DATA_WIDTH / 8,
+    parameter int unsigned AXI_ID_WIDTH       = 8,
+    parameter int unsigned AXI_USER_WIDTH     = 1,
+    parameter int unsigned AXI_MAX_BURST_LEN  = 16,
+
+    parameter int unsigned AXIS_DATA_WIDTH    = AXI_DATA_WIDTH,
+    parameter int unsigned AXIS_KEEP_ENABLE   = AXIS_DATA_WIDTH > 8,
+    parameter int unsigned AXIS_KEEP_WIDTH    = AXIS_DATA_WIDTH / 8,
+    parameter int unsigned AXIS_LAST_ENABLE   = 1,
+    parameter int unsigned AXIS_ID_ENABLE     = 1,
+    parameter int unsigned AXIS_DEST_ENABLE   = 0,
+    parameter int unsigned AXIS_USER_ENABLE   = 1,
+
+    parameter int unsigned ENABLE_SG          = 0,
+    parameter int unsigned ENABLE_UNALIGNED   = 0
+)
+(
+    input  logic                       ctrl_clk,
+    input  logic                       dac_clk_in,
+    input  logic                       adc_clk_in,
+    input  logic                       rst_n,
+    axi4l_if.slave                     s_axil,
+
+    // adc_clk_in domain
+    input  logic                       finish,
+    output logic [31:0]                adc_window_size,
+
+    // dac_clk_in domain outputs
+    output logic [31:0]                dac_pulse_width,
+    output logic [31:0]                dac_pulse_period,
+    output logic [DAC_DATA_WIDTH-1:0]  dac_pulse_height,
+    output logic [15:0]                dac_pulse_num,
+
+    // adc_clk_in domain outputs
+    output logic [31:0]                adc_pulse_period,
+    output logic [15:0]                adc_pulse_num,
+
+    // pulse outputs
+    output logic                       dac_start,
+    output logic                       adc_start,
+    output logic                       dac_rst,
+    output logic                       adc_rst,
+
+    axis_if.master    m_axis_read_data,
+    axis_if.slave   s_axis_write_data,
+
+    axi4_if.master    m_axi
+);
+
+axis_if #(
+    .DATA_W($bits(dma_read_status_t)),
+    .KEEP_W(($bits(dma_read_status_t)+7)/8),
+    .ID_W(dma_reg_pkg::AXIS_ID_WIDTH),
+    .DEST_W(dma_reg_pkg::AXIS_DEST_WIDTH),
+    .USER_W(dma_reg_pkg::AXIS_USER_WIDTH)
+  ) s_axis_status_read (
+    .aclk(ctrl_clk),
+    .aresetn(rst_n)
+  );
+
+  axis_if #(
+    .DATA_W($bits(dma_write_status_t)),
+    .KEEP_W(($bits(dma_write_status_t)+7)/8),
+    .ID_W(dma_reg_pkg::AXIS_ID_WIDTH),
+    .DEST_W(dma_reg_pkg::AXIS_DEST_WIDTH),
+    .USER_W(dma_reg_pkg::AXIS_USER_WIDTH)
+  ) s_axis_status_write (
+    .aclk(ctrl_clk),
+    .aresetn(rst_n)
+  );
+
+  axis_if #(
+    .DATA_W($bits(dma_read_desc_t)),
+    .KEEP_W(($bits(dma_read_desc_t)+7)/8),
+    .ID_W(dma_reg_pkg::AXIS_ID_WIDTH),
+    .DEST_W(dma_reg_pkg::AXIS_DEST_WIDTH),
+    .USER_W(dma_reg_pkg::AXIS_USER_WIDTH)
+  ) m_axis_desc_read (
+    .aclk(ctrl_clk),
+    .aresetn(rst_n)
+  );
+
+  axis_if #(
+    .DATA_W($bits(dma_write_desc_t)),
+    .KEEP_W(($bits(dma_write_desc_t)+7)/8),
+    .ID_W(dma_reg_pkg::AXIS_ID_WIDTH),
+    .DEST_W(dma_reg_pkg::AXIS_DEST_WIDTH),
+    .USER_W(dma_reg_pkg::AXIS_USER_WIDTH)
+  ) m_axis_desc_write (
+    .aclk(ctrl_clk),
+    .aresetn(rst_n)
+  );
+
+controller_wrapper_axil
+#(
+    .ADDR_W(ADDR_W),
+    .DATA_W(DATA_W),
+    .USER_W(USER_W),
+    .DAC_DATA_WIDTH(DAC_DATA_WIDTH)
+)
+controller_wrapper_axil_inst
+(
+    .ctrl_clk(ctrl_clk),
+    .dac_clk_in(dac_clk_in),
+    .adc_clk_in(adc_clk_in),
+    .rst_n(rst_n),
+
+    .s_axil(s_axil),
+
+    .finish(finish),
+    .adc_window_size(adc_window_size),
+    .dac_pulse_width(dac_pulse_width),
+    .dac_pulse_period(dac_pulse_period),
+    .dac_pulse_height(dac_pulse_height),
+    .dac_pulse_num(dac_pulse_num),
+    .adc_pulse_period(adc_pulse_period),
+    .adc_pulse_num(adc_pulse_num),
+    .dac_start(dac_start),
+    .adc_start(adc_start),
+    .dac_rst(dac_rst),
+    .adc_rst(adc_rst),
+
+    .s_axis_status_read(s_axis_status_read),
+    .s_axis_status_write(s_axis_status_write),
+    .m_axis_desc_read(m_axis_desc_read),
+    .m_axis_desc_write(m_axis_desc_write)
+);
+
+axi_dma_wrapper
+#(
+    .AXI_DATA_WIDTH(AXI_DATA_WIDTH),
+    .AXI_STRB_WIDTH(AXI_STRB_WIDTH),
+    .AXI_USER_WIDTH(AXI_USER_WIDTH),
+    .AXI_MAX_BURST_LEN(AXI_MAX_BURST_LEN),
+    .AXIS_DATA_WIDTH(AXIS_DATA_WIDTH),
+    .AXIS_KEEP_ENABLE(AXIS_KEEP_ENABLE),
+    .AXIS_KEEP_WIDTH(AXIS_KEEP_WIDTH),
+    .AXIS_LAST_ENABLE(AXIS_LAST_ENABLE),
+    .AXIS_ID_ENABLE(AXIS_ID_ENABLE),
+    .AXIS_DEST_ENABLE(AXIS_DEST_ENABLE),
+    .AXIS_USER_ENABLE(AXIS_USER_ENABLE),
+    .ENABLE_SG(ENABLE_SG),
+    .ENABLE_UNALIGNED(ENABLE_UNALIGNED)
+)
+axi_dma_wrapper_inst
+(
+    .clk(ctrl_clk),
+    .rst(!rst_n),
+    .s_axis_read_desc(m_axis_desc_read),
+    .m_axis_read_desc_status(s_axis_status_read),
+    .m_axis_read_data(m_axis_read_data),
+    .s_axis_write_desc(m_axis_desc_write),
+    .m_axis_write_desc_status(s_axis_status_write),
+    .s_axis_write_data(s_axis_write_data),
+    .m_axi(m_axi)
+);
+endmodule

designs/controller_dma_connective/tests/Makefile

@@ -0,0 +1,46 @@
+TOPLEVEL_LANG = verilog
+SIM ?= verilator
+
+PWD := $(shell pwd)
+
+WRAP_DIR = $(PWD)/../src
+RTL_DIR  = $(PWD)/../../controller/src
+LIBS_DIR = $(PWD)/../../../external/rtl_libs
+
+VERILOG_SOURCES += $(LIBS_DIR)/axi/rtl/axi_pkg.sv
+VERILOG_SOURCES += $(RTL_DIR)/dma_reg_pkg.sv
+VERILOG_SOURCES += $(LIBS_DIR)/axi/rtl/axi_if.sv
+VERILOG_SOURCES += $(LIBS_DIR)/axi/axi_reg/axi4l_reg_map.sv
+VERILOG_SOURCES += $(LIBS_DIR)/external/verilog-axi/rtl/axi_dma_rd.v
+VERILOG_SOURCES += $(LIBS_DIR)/external/verilog-axi/rtl/axi_dma_wr.v
+VERILOG_SOURCES += $(LIBS_DIR)/external/verilog-axi/rtl/axi_dma.v
+VERILOG_SOURCES += $(RTL_DIR)/controller.sv
+VERILOG_SOURCES += $(RTL_DIR)/dma_controller.sv
+VERILOG_SOURCES += $(RTL_DIR)/shaper_axis_desc.sv
+VERILOG_SOURCES += $(RTL_DIR)/shaper_axis_status.sv
+VERILOG_SOURCES += $(RTL_DIR)/controller_wrapper_axil.sv
+VERILOG_SOURCES += $(RTL_DIR)/axi4l_reg_map_controller_pkg.sv
+VERILOG_SOURCES += $(RTL_DIR)/axis_defaults_helper.sv
+VERILOG_SOURCES += $(RTL_DIR)/axi4l_reg_map_controller.sv
+VERILOG_SOURCES += $(WRAP_DIR)/wrapper_controller_dma.sv
+VERILOG_SOURCES += $(WRAP_DIR)/axi_dma_wrapper_if.sv
+VERILOG_SOURCES += $(PWD)/tb_controller_dma_wrapper_axil.sv
+
+TOPLEVEL = tb_controller_dma_wrapper_axil
+MODULE = test_controller_and_dma
+
+
+ifeq ($(SIM),verilator)
+    EXTRA_ARGS += --trace --trace-structs
+    EXTRA_ARGS += -I$(LIBS_DIR)/axi/rtl/
+    COMPILE_ARGS += -Wno-fatal
+    COMPILE_ARGS += -I$(LIBS_DIR)/axi/rtl/
+    EXTRA_ARGS += --trace
+    EXTRA_ARGS += --trace-structs
+    EXTRA_ARGS += --public-flat-rw
+    EXTRA_ARGS += -Wno-fatal
+    EXTRA_ARGS += --timing
+endif
+
+
+include $(shell cocotb-config --makefiles)/Makefile.sim

designs/controller_dma_connective/tests/tb_control_dma_behav.wcfg

@@ -0,0 +1,236 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<wave_config>
+   <wave_state>
+   </wave_state>
+   <db_ref_list>
+      <db_ref path="tb_control_behav.wdb" id="1">
+         <top_modules>
+            <top_module name="glbl" />
+            <top_module name="tb_control" />
+         </top_modules>
+      </db_ref>
+   </db_ref_list>
+   <zoom_setting>
+      <ZoomStartTime time="160.614 ns"></ZoomStartTime>
+      <ZoomEndTime time="1,564.737 ns"></ZoomEndTime>
+      <Cursor1Time time="1,330.716 ns"></Cursor1Time>
+   </zoom_setting>
+   <column_width_setting>
+      <NameColumnWidth column_width="479"></NameColumnWidth>
+      <ValueColumnWidth column_width="116"></ValueColumnWidth>
+   </column_width_setting>
+   <WVObjectSize size="34" />
+   <wvobject fp_name="/tb_control/dac_clk_in" type="logic">
+      <obj_property name="ElementShortName">dac_clk_in</obj_property>
+      <obj_property name="ObjectShortName">dac_clk_in</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/adc_clk_in" type="logic">
+      <obj_property name="ElementShortName">adc_clk_in</obj_property>
+      <obj_property name="ObjectShortName">adc_clk_in</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/rst_n" type="logic">
+      <obj_property name="ElementShortName">rst_n</obj_property>
+      <obj_property name="ObjectShortName">rst_n</obj_property>
+      <obj_property name="CustomSignalColor">#800080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/rst_soft" type="logic">
+      <obj_property name="ElementShortName">rst_soft</obj_property>
+      <obj_property name="ObjectShortName">rst_soft</obj_property>
+      <obj_property name="CustomSignalColor">#008080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/start" type="logic">
+      <obj_property name="ElementShortName">start</obj_property>
+      <obj_property name="ObjectShortName">start</obj_property>
+      <obj_property name="CustomSignalColor">#E0FFFF</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/adc_start_pulse" type="logic">
+      <obj_property name="ElementShortName">adc_start_pulse</obj_property>
+      <obj_property name="ObjectShortName">adc_start_pulse</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/dac_start_pulse" type="logic">
+      <obj_property name="ElementShortName">dac_start_pulse</obj_property>
+      <obj_property name="ObjectShortName">dac_start_pulse</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/busy" type="logic">
+      <obj_property name="ElementShortName">busy</obj_property>
+      <obj_property name="ObjectShortName">busy</obj_property>
+      <obj_property name="CustomSignalColor">#E0FFFF</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/finish" type="logic">
+      <obj_property name="ElementShortName">finish</obj_property>
+      <obj_property name="ObjectShortName">finish</obj_property>
+      <obj_property name="CustomSignalColor">#FAAFBE</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/finish_pulse" type="logic">
+      <obj_property name="ElementShortName">finish_pulse</obj_property>
+      <obj_property name="ObjectShortName">finish_pulse</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/cfg_bus_valid" type="logic">
+      <obj_property name="ElementShortName">cfg_bus_valid</obj_property>
+      <obj_property name="ObjectShortName">cfg_bus_valid</obj_property>
+      <obj_property name="CustomSignalColor">#FF0080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/cfg_bus_input" type="array">
+      <obj_property name="ElementShortName">cfg_bus_input[159:0]</obj_property>
+      <obj_property name="ObjectShortName">cfg_bus_input[159:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FF0080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dac_pulse_width" type="array">
+      <obj_property name="ElementShortName">dac_pulse_width[31:0]</obj_property>
+      <obj_property name="ObjectShortName">dac_pulse_width[31:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dac_pulse_period" type="array">
+      <obj_property name="ElementShortName">dac_pulse_period[31:0]</obj_property>
+      <obj_property name="ObjectShortName">dac_pulse_period[31:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dac_pulse_height" type="array">
+      <obj_property name="ElementShortName">dac_pulse_height[11:0]</obj_property>
+      <obj_property name="ObjectShortName">dac_pulse_height[11:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+      <obj_property name="Radix">HEXRADIX</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dac_pulse_num" type="array">
+      <obj_property name="ElementShortName">dac_pulse_num[15:0]</obj_property>
+      <obj_property name="ObjectShortName">dac_pulse_num[15:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/adc_pulse_period" type="array">
+      <obj_property name="ElementShortName">adc_pulse_period[31:0]</obj_property>
+      <obj_property name="ObjectShortName">adc_pulse_period[31:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/adc_pulse_num" type="array">
+      <obj_property name="ElementShortName">adc_pulse_num[15:0]</obj_property>
+      <obj_property name="ObjectShortName">adc_pulse_num[15:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/adc_window_size" type="array">
+      <obj_property name="ElementShortName">adc_window_size[31:0]</obj_property>
+      <obj_property name="ObjectShortName">adc_window_size[31:0]</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dac_start" type="logic">
+      <obj_property name="ElementShortName">dac_start</obj_property>
+      <obj_property name="ObjectShortName">dac_start</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/adc_start" type="logic">
+      <obj_property name="ElementShortName">adc_start</obj_property>
+      <obj_property name="ObjectShortName">adc_start</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dac_rst" type="logic">
+      <obj_property name="ElementShortName">dac_rst</obj_property>
+      <obj_property name="ObjectShortName">dac_rst</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/adc_rst" type="logic">
+      <obj_property name="ElementShortName">adc_rst</obj_property>
+      <obj_property name="ObjectShortName">adc_rst</obj_property>
+   </wvobject>
+   <wvobject fp_name="group499" type="group">
+      <obj_property name="label">tb signals</obj_property>
+      <obj_property name="DisplayName">label</obj_property>
+      <wvobject fp_name="/tb_control/dac_rst_count" type="array">
+         <obj_property name="ElementShortName">dac_rst_count[31:0]</obj_property>
+         <obj_property name="ObjectShortName">dac_rst_count[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject fp_name="/tb_control/adc_rst_count" type="array">
+         <obj_property name="ElementShortName">adc_rst_count[31:0]</obj_property>
+         <obj_property name="ObjectShortName">adc_rst_count[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject fp_name="/tb_control/dac_start_count" type="array">
+         <obj_property name="ElementShortName">dac_start_count[31:0]</obj_property>
+         <obj_property name="ObjectShortName">dac_start_count[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject fp_name="/tb_control/adc_start_count" type="array">
+         <obj_property name="ElementShortName">adc_start_count[31:0]</obj_property>
+         <obj_property name="ObjectShortName">adc_start_count[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_req_toggle_adc" type="logic">
+      <obj_property name="ElementShortName">cfg_req_toggle_adc</obj_property>
+      <obj_property name="ObjectShortName">cfg_req_toggle_adc</obj_property>
+      <obj_property name="CustomSignalColor">#FFFF00</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_req_toggle_dac" type="logic">
+      <obj_property name="ElementShortName">cfg_req_toggle_dac</obj_property>
+      <obj_property name="ObjectShortName">cfg_req_toggle_dac</obj_property>
+      <obj_property name="CustomSignalColor">#FFFF00</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_ack_toggle_adc" type="logic">
+      <obj_property name="ElementShortName">cfg_ack_toggle_adc</obj_property>
+      <obj_property name="ObjectShortName">cfg_ack_toggle_adc</obj_property>
+      <obj_property name="CustomSignalColor">#FF00FF</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_ack_toggle_dac" type="logic">
+      <obj_property name="ElementShortName">cfg_ack_toggle_dac</obj_property>
+      <obj_property name="ObjectShortName">cfg_ack_toggle_dac</obj_property>
+      <obj_property name="CustomSignalColor">#FF00FF</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_wait_adc_ack" type="logic">
+      <obj_property name="ElementShortName">cfg_wait_adc_ack</obj_property>
+      <obj_property name="ObjectShortName">cfg_wait_adc_ack</obj_property>
+      <obj_property name="CustomSignalColor">#0000FF</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_wait_dac_ack" type="logic">
+      <obj_property name="ElementShortName">cfg_wait_dac_ack</obj_property>
+      <obj_property name="ObjectShortName">cfg_wait_dac_ack</obj_property>
+      <obj_property name="CustomSignalColor">#0000FF</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_req_pulse_adc" type="logic">
+      <obj_property name="ElementShortName">cfg_req_pulse_adc</obj_property>
+      <obj_property name="ObjectShortName">cfg_req_pulse_adc</obj_property>
+      <obj_property name="CustomSignalColor">#808000</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_req_pulse_dac" type="logic">
+      <obj_property name="ElementShortName">cfg_req_pulse_dac</obj_property>
+      <obj_property name="ObjectShortName">cfg_req_pulse_dac</obj_property>
+      <obj_property name="CustomSignalColor">#808000</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_ack_pulse_adc" type="logic">
+      <obj_property name="ElementShortName">cfg_ack_pulse_adc</obj_property>
+      <obj_property name="ObjectShortName">cfg_ack_pulse_adc</obj_property>
+      <obj_property name="CustomSignalColor">#DCDCDC</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_ack_pulse_dac" type="logic">
+      <obj_property name="ElementShortName">cfg_ack_pulse_dac</obj_property>
+      <obj_property name="ObjectShortName">cfg_ack_pulse_dac</obj_property>
+      <obj_property name="CustomSignalColor">#DCDCDC</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+</wave_config>

designs/controller_dma_connective/tests/tb_controller_dma_wrapper_axil.sv

@@ -0,0 +1,373 @@
+
+import dma_reg_pkg::*;
+
+module tb_controller_wrapper_axil #(
+  parameter int unsigned ADDR_W             = 16,
+    parameter int unsigned DATA_W             = 32,
+    parameter int unsigned USER_W             = 1,
+
+    parameter int unsigned DAC_DATA_WIDTH     = 12,
+
+    parameter int unsigned AXI_DATA_WIDTH     = 32,
+
+    parameter int unsigned AXI_STRB_WIDTH     = AXI_DATA_WIDTH / 8,
+    parameter int unsigned AXI_ID_WIDTH       = 8,
+    parameter int unsigned AXI_USER_WIDTH     = 1,
+    parameter int unsigned AXI_MAX_BURST_LEN  = 16,
+
+    parameter int unsigned AXIS_DATA_WIDTH    = AXI_DATA_WIDTH,
+    parameter int unsigned AXIS_KEEP_ENABLE   = AXIS_DATA_WIDTH > 8,
+    parameter int unsigned AXIS_KEEP_WIDTH    = AXIS_DATA_WIDTH / 8,
+    parameter int unsigned AXIS_LAST_ENABLE   = 1,
+    parameter int unsigned AXIS_ID_ENABLE     = 1,
+    parameter int unsigned AXIS_DEST_ENABLE   = 0,
+    parameter int unsigned AXIS_USER_ENABLE   = 1,
+
+    parameter int unsigned ENABLE_SG          = 0,
+    parameter int unsigned ENABLE_UNALIGNED   = 0
+)(
+  input  logic                 ctrl_clk,
+  input  logic                 rst,
+
+  input  logic [ADDR_W-1:0]   s_axil_awaddr,
+  input  logic [2:0]          s_axil_awprot,
+  input  logic                s_axil_awvalid,
+  output logic                s_axil_awready,
+
+  input  logic [DATA_W-1:0]   s_axil_wdata,
+  input  logic [DATA_W/8-1:0] s_axil_wstrb,
+  input  logic                s_axil_wvalid,
+  output logic                s_axil_wready,
+
+  output logic [1:0]          s_axil_bresp,
+  output logic                s_axil_bvalid,
+  input  logic                s_axil_bready,
+
+  input  logic [ADDR_W-1:0]   s_axil_araddr,
+  input  logic [2:0]          s_axil_arprot,
+  input  logic                s_axil_arvalid,
+  output logic                s_axil_arready,
+
+  output logic [DATA_W-1:0]   s_axil_rdata,
+  output logic [1:0]          s_axil_rresp,
+  output logic                s_axil_rvalid,
+  input  logic                s_axil_rready,
+
+  input  wire [AXIS_DATA_WIDTH-1:0] s_axis_write_data_tdata,
+    input  wire [AXIS_KEEP_WIDTH-1:0] s_axis_write_data_tkeep,
+    input  wire                       s_axis_write_data_tvalid,
+    output wire                       s_axis_write_data_tready,
+    input  wire                       s_axis_write_data_tlast,
+    input  wire [AXIS_ID_WIDTH-1:0]   s_axis_write_data_tid,
+    input  wire [AXIS_DEST_WIDTH-1:0] s_axis_write_data_tdest,
+    input  wire [AXIS_USER_WIDTH-1:0] s_axis_write_data_tuser,
+
+    output wire [AXIS_DATA_WIDTH-1:0] m_axis_read_data_tdata,
+    output wire [AXIS_KEEP_WIDTH-1:0] m_axis_read_data_tkeep,
+    output wire                       m_axis_read_data_tvalid,
+    input  wire                       m_axis_read_data_tready,
+    output wire                       m_axis_read_data_tlast,
+    output wire [AXIS_ID_WIDTH-1:0]   m_axis_read_data_tid,
+    output wire [AXIS_DEST_WIDTH-1:0] m_axis_read_data_tdest,
+    output wire [AXIS_USER_WIDTH-1:0] m_axis_read_data_tuser,
+
+     output wire [AXI_ID_WIDTH-1:0]    m_axi_awid,
+    output wire [AXI_ADDR_WIDTH-1:0]  m_axi_awaddr,
+    output wire [7:0]                 m_axi_awlen,
+    output wire [2:0]                 m_axi_awsize,
+    output wire [1:0]                 m_axi_awburst,
+    output wire                       m_axi_awlock,
+    output wire [3:0]                 m_axi_awcache,
+    output wire [2:0]                 m_axi_awprot,
+    output wire                       m_axi_awvalid,
+    input  wire                       m_axi_awready,
+    output wire [AXI_DATA_WIDTH-1:0]  m_axi_wdata,
+    output wire [AXI_STRB_WIDTH-1:0]  m_axi_wstrb,
+    output wire                       m_axi_wlast,
+    output wire                       m_axi_wvalid,
+    input  wire                       m_axi_wready,
+    input  wire [AXI_ID_WIDTH-1:0]    m_axi_bid,
+    input  wire [1:0]                 m_axi_bresp,
+    input  wire                       m_axi_bvalid,
+    output wire                       m_axi_bready,
+    output wire [AXI_ID_WIDTH-1:0]    m_axi_arid,
+    output wire [AXI_ADDR_WIDTH-1:0]  m_axi_araddr,
+    output wire [7:0]                 m_axi_arlen,
+    output wire [2:0]                 m_axi_arsize,
+    output wire [1:0]                 m_axi_arburst,
+    output wire                       m_axi_arlock,
+    output wire [3:0]                 m_axi_arcache,
+    output wire [2:0]                 m_axi_arprot,
+    output wire                       m_axi_arvalid,
+    input  wire                       m_axi_arready,
+    input  wire [AXI_ID_WIDTH-1:0]    m_axi_rid,
+    input  wire [AXI_DATA_WIDTH-1:0]  m_axi_rdata,
+    input  wire [1:0]                 m_axi_rresp,
+    input  wire                       m_axi_rlast,
+    input  wire                       m_axi_rvalid,
+    output wire                       m_axi_rready
+
+    
+);
+
+  logic rst_n;
+  assign rst_n = ~rst;
+
+  // Для минимального теста держим все clock domain-ы на одном clock.
+  logic dac_clk_in;
+  logic adc_clk_in;
+  assign dac_clk_in = ctrl_clk;
+  assign adc_clk_in = ctrl_clk;
+
+  logic finish;
+  assign finish = 1'b0;
+
+  // ---------------------------------------------------------------------------
+  // AXI-Lite flat -> axi4l_if
+  // ---------------------------------------------------------------------------
+
+  axi4l_if #(
+    .ADDR_W(ADDR_W),
+    .DATA_W(DATA_W),
+    .USER_W(USER_W)
+  ) axil_bus (
+    .aclk(ctrl_clk),
+    .aresetn(rst_n)
+  );
+
+  axi4l_flat_to_if #(
+    .ADDR_W(ADDR_W),
+    .DATA_W(DATA_W),
+    .USER_W(USER_W)
+  ) u_axil_flat_to_if (
+    .s_axil_awaddr (s_axil_awaddr),
+    .s_axil_awprot (s_axil_awprot),
+    .s_axil_awvalid(s_axil_awvalid),
+    .s_axil_awready(s_axil_awready),
+
+    .s_axil_wdata  (s_axil_wdata),
+    .s_axil_wstrb  (s_axil_wstrb),
+    .s_axil_wvalid (s_axil_wvalid),
+    .s_axil_wready (s_axil_wready),
+
+    .s_axil_bresp  (s_axil_bresp),
+    .s_axil_bvalid (s_axil_bvalid),
+    .s_axil_bready (s_axil_bready),
+
+    .s_axil_araddr (s_axil_araddr),
+    .s_axil_arprot (s_axil_arprot),
+    .s_axil_arvalid(s_axil_arvalid),
+    .s_axil_arready(s_axil_arready),
+
+    .s_axil_rdata  (s_axil_rdata),
+    .s_axil_rresp  (s_axil_rresp),
+    .s_axil_rvalid (s_axil_rvalid),
+    .s_axil_rready (s_axil_rready),
+
+    .m_axil(axil_bus)
+  );
+
+  // ---------------------------------------------------------------------------
+  // AXIS interfaces for the updated controller_wrapper_axil
+  // ---------------------------------------------------------------------------
+
+// AXIS READ DMA MASTER output
+  axis_if #(
+    .DATA_W (AXIS_DATA_WIDTH),
+    .KEEP_W (AXIS_KEEP_WIDTH),
+    .ID_W   (AXIS_ID_WIDTH),
+    .DEST_W (AXIS_DEST_WIDTH),
+    .USER_W (AXIS_USER_WIDTH)
+  ) dma_read_data (
+    .aclk(ctrl_clk),
+    .aresetn(rst_n)
+  );
+
+logic [AXIS_KEEP_WIDTH-1:0] unused_read_tstrb;
+
+axis_if_to_flat #(
+    .DATA_W (AXIS_DATA_WIDTH),
+    .KEEP_W (AXIS_KEEP_WIDTH),
+    .ID_W   (AXIS_ID_WIDTH),
+    .DEST_W (AXIS_DEST_WIDTH),
+    .USER_W (AXIS_USER_WIDTH)
+) u_read_data_if_to_flat (
+    .s_axis(dma_read_data),
+
+    .m_axis_tdata (m_axis_read_data_tdata),
+    .m_axis_tkeep (m_axis_read_data_tkeep),
+    .m_axis_tstrb (unused_read_tstrb),
+    .m_axis_tlast (m_axis_read_data_tlast),
+    .m_axis_tid   (m_axis_read_data_tid),
+    .m_axis_tdest (m_axis_read_data_tdest),
+    .m_axis_tuser (m_axis_read_data_tuser),
+    .m_axis_tvalid(m_axis_read_data_tvalid),
+    .m_axis_tready(m_axis_read_data_tready)
+);
+
+// AXIS WRITE DMA SLAVE input 
+  axis_if #(
+    .DATA_W (AXIS_DATA_WIDTH),
+    .KEEP_W (AXIS_KEEP_WIDTH),
+    .ID_W   (AXIS_ID_WIDTH),
+    .DEST_W (AXIS_DEST_WIDTH),
+    .USER_W (AXIS_USER_WIDTH)
+  ) dma_write_data (
+    .aclk(ctrl_clk),
+    .aresetn(rst_n)
+  );
+
+
+axis_flat_to_if #(
+    .DATA_W (AXIS_DATA_WIDTH),
+    .KEEP_W (AXIS_KEEP_WIDTH),
+    .ID_W   (AXIS_ID_WIDTH),
+    .DEST_W (AXIS_DEST_WIDTH),
+    .USER_W (AXIS_USER_WIDTH)
+) u_write_data_flat_to_if (
+    .s_axis_tdata (s_axis_write_data_tdata),
+    .s_axis_tkeep (s_axis_write_data_tkeep),
+    .s_axis_tstrb (s_axis_write_data_tkeep),
+    .s_axis_tlast (s_axis_write_data_tlast),
+    .s_axis_tid   (s_axis_write_data_tid),
+    .s_axis_tdest (s_axis_write_data_tdest),
+    .s_axis_tuser (s_axis_write_data_tuser),
+    .s_axis_tvalid(s_axis_write_data_tvalid),
+    .s_axis_tready(s_axis_write_data_tready),
+
+    .m_axis(dma_write_data)
+);
+
+// AXI4 MASTER DMA
+
+axi4_if #(
+    .ADDR_W(dma_reg_pkg::AXI_ADDR_WIDTH),
+    .DATA_W(AXI_DATA_WIDTH),
+    .ID_W  (AXI_ID_WIDTH),
+    .USER_W(AXI_USER_WIDTH)
+) m_axi (
+    .aclk(ctrl_clk),
+    .aresetn(rst_n)
+);
+
+logic [AXI_USER_WIDTH-1:0] unused_awuser;
+logic [AXI_USER_WIDTH-1:0] unused_wuser;
+logic [AXI_USER_WIDTH-1:0] unused_aruser;
+
+axi4_if_to_flat #(
+    .ADDR_W (dma_reg_pkg::AXI_ADDR_WIDTH),
+    .DATA_W (AXI_DATA_WIDTH),
+    .ID_W   (AXI_ID_WIDTH),
+    .USER_W (AXI_USER_WIDTH)
+) u_axi_if_to_flat (
+    .s_axi(m_axi),
+
+    .m_axi_awid    (m_axi_awid),
+    .m_axi_awaddr  (m_axi_awaddr),
+    .m_axi_awlen   (m_axi_awlen),
+    .m_axi_awsize  (m_axi_awsize),
+    .m_axi_awburst (m_axi_awburst),
+    .m_axi_awlock  (m_axi_awlock),
+    .m_axi_awcache (m_axi_awcache),
+    .m_axi_awprot  (m_axi_awprot),
+    .m_axi_awqos   (),
+    .m_axi_awregion(),
+    .m_axi_awuser  (unused_awuser),
+    .m_axi_awvalid (m_axi_awvalid),
+    .m_axi_awready (m_axi_awready),
+
+    .m_axi_wdata   (m_axi_wdata),
+    .m_axi_wstrb   (m_axi_wstrb),
+    .m_axi_wlast   (m_axi_wlast),
+    .m_axi_wuser   (unused_wuser),
+    .m_axi_wvalid  (m_axi_wvalid),
+    .m_axi_wready  (m_axi_wready),
+
+    .m_axi_bid     (m_axi_bid),
+    .m_axi_bresp   (m_axi_bresp),
+    .m_axi_buser   ({AXI_USER_WIDTH{1'b0}}),
+    .m_axi_bvalid  (m_axi_bvalid),
+    .m_axi_bready  (m_axi_bready),
+
+    .m_axi_arid    (m_axi_arid),
+    .m_axi_araddr  (m_axi_araddr),
+    .m_axi_arlen   (m_axi_arlen),
+    .m_axi_arsize  (m_axi_arsize),
+    .m_axi_arburst (m_axi_arburst),
+    .m_axi_arlock  (m_axi_arlock),
+    .m_axi_arcache (m_axi_arcache),
+    .m_axi_arprot  (m_axi_arprot),
+    .m_axi_arqos   (),
+    .m_axi_arregion(),
+    .m_axi_aruser  (unused_aruser),
+    .m_axi_arvalid (m_axi_arvalid),
+    .m_axi_arready (m_axi_arready),
+
+    .m_axi_rid     (m_axi_rid),
+    .m_axi_rdata   (m_axi_rdata),
+    .m_axi_rresp   (m_axi_rresp),
+    .m_axi_rlast   (m_axi_rlast),
+    .m_axi_ruser   ({AXI_USER_WIDTH{1'b0}}),
+    .m_axi_rvalid  (m_axi_rvalid),
+    .m_axi_rready  (m_axi_rready)
+);
+
+
+  // Controller ADC/DAC outputs.
+  logic [31:0]               adc_window_size;
+  logic [31:0]               dac_pulse_width;
+  logic [31:0]               dac_pulse_period;
+  logic [DAC_DATA_WIDTH-1:0] dac_pulse_height;
+  logic [15:0]               dac_pulse_num;
+  logic [31:0]               adc_pulse_period;
+  logic [15:0]               adc_pulse_num;
+  logic                      dac_start;
+  logic                      adc_start;
+  logic                      dac_rst;
+  logic                      adc_rst;
+
+  wrapper_controller_dma #(
+    .ADDR_W(ADDR_W),
+    .DATA_W(DATA_W),
+    .USER_W(USER_W),
+    .DAC_DATA_WIDTH(DAC_DATA_WIDTH),
+    .AXI_DATA_WIDTH(AXI_DATA_WIDTH),
+    .AXI_ID_WIDTH(AXI_ID_WIDTH),
+    .AXI_USER_WIDTH(AXI_USER_WIDTH),
+    .AXI_MAX_BURST_LEN(AXI_MAX_BURST_LEN),
+    .AXIS_LAST_ENABLE(AXIS_LAST_ENABLE),
+    .AXIS_ID_ENABLE(AXIS_ID_ENABLE),
+    .AXIS_DEST_ENABLE(AXIS_DEST_ENABLE),
+    .AXIS_USER_ENABLE(AXIS_USER_ENABLE),
+    .ENABLE_SG(ENABLE_SG),
+    .ENABLE_UNALIGNED(ENABLE_UNALIGNED)
+  ) dut (
+    .ctrl_clk(ctrl_clk),
+    .dac_clk_in(dac_clk_in),
+    .adc_clk_in(adc_clk_in),
+    .rst_n(rst_n),
+    .s_axil(axil_bus),
+
+    .finish(finish),
+    .adc_window_size(adc_window_size),
+
+    .dac_pulse_width(dac_pulse_width),
+    .dac_pulse_period(dac_pulse_period),
+    .dac_pulse_height(dac_pulse_height),
+    .dac_pulse_num(dac_pulse_num),
+
+    .adc_pulse_period(adc_pulse_period),
+    .adc_pulse_num(adc_pulse_num),
+
+    .dac_start(dac_start),
+    .adc_start(adc_start),
+    .dac_rst(dac_rst),
+    .adc_rst(adc_rst),
+
+    .m_axis_read_data(dma_read_data),
+    .s_axis_write_data(dma_write_data),
+
+    .m_axi(m_axi)
+  );
+
+endmodule : tb_controller_wrapper_axil

designs/controller_dma_connective/tests/test_controller_and_dma.py

@@ -0,0 +1,216 @@
+import cocotb
+from cocotb.clock import Clock
+from cocotb.handle import Immediate
+from cocotb.triggers import RisingEdge
+from cocotbext.axi import AxiLiteBus, AxiLiteMaster
+from cocotbext.axi import AxiBus, AxiRam, AxiStreamBus, AxiStreamSource, AxiStreamSink
+
+
+# Register indexes from axi4l_reg_map_controller_pkg.sv
+REG_CONTROL = 0
+REG_STATUS = 1
+REG_DAC_WIDTH = 2
+REG_DAC_PERIOD = 3
+REG_DAC_PULSE_NUM = 4
+REG_DAC_PULSE_HEIGHT = 5
+REG_ADC_PERIOD = 6
+REG_WINDOW_SIZE = 7
+REG_ERROR = 8
+REG_DESC_READ_ADDR = 9
+REG_DESC_READ_LEN = 10
+REG_DESC_READ_CONFIG = 11
+REG_READ_STATUS = 12
+REG_DESC_WRITE_ADDR = 13
+REG_DESC_WRITE_LEN_AND_TAG = 14
+REG_STATUS_WRITE_LEN = 15
+REG_STATUS_WRITE_CONFIG = 16
+
+
+# REG_CONTROL pulse bits
+CTRL_START = 0
+CTRL_RST_SOFT = 1
+CTRL_CFG_BUS_VALID = 2
+CTRL_SEND_DESC_READ = 3
+CTRL_SEND_DESC_WRITE = 4
+CTRL_TAKE_STATUS_READ = 5
+CTRL_TAKE_STATUS_WRITE = 6
+
+
+def reg_addr(reg_index: int) -> int:
+    # AXI-Lite uses byte addresses, 32-bit registers are spaced by 4 bytes.
+    return reg_index * 4
+
+
+def u32(value: int) -> bytes:
+    return int(value & 0xFFFFFFFF).to_bytes(4, "little")
+
+
+class TB:
+    def __init__(self, dut):
+        self.dut = dut
+
+        cocotb.start_soon(Clock(dut.ctrl_clk, 10, units="ns").start())
+
+        self.axil = AxiLiteMaster(
+            AxiLiteBus.from_prefix(dut, "s_axil"),
+            dut.ctrl_clk,
+            dut.rst
+        )
+
+
+        self.axis_source = AxiStreamSource(
+            AxiStreamBus.from_prefix(dut, "s_axis_write_data"),
+            dut.ctrl_clk,
+            dut.rst
+        )
+
+        self.axis_sink = AxiStreamSink(
+            AxiStreamBus.from_prefix(dut, "m_axis_read_data"),
+            dut.ctrl_clk,
+            dut.rst
+        )
+
+    async def reset(self):
+        self.dut.rst.value = 1
+        for _ in range(5):
+            await RisingEdge(self.dut.ctrl_clk)
+
+        self.dut.rst.value = 0
+        for _ in range(5):
+            await RisingEdge(self.dut.ctrl_clk)
+
+    async def write_reg(self, reg_index: int, value: int):
+        await self.axil.write(reg_addr(reg_index), u32(value))
+
+    async def read_reg(self, reg_index: int) -> int:
+        resp = await self.axil.read(reg_addr(reg_index), 4)
+        return int.from_bytes(bytes(resp.data), "little")
+
+
+@cocotb.test()
+async def simple_axil_write_read(dut):
+    tb = TB(dut)
+    await tb.reset()
+
+    await tb.write_reg(REG_DAC_WIDTH, 0x0000_0123)
+
+    value = await tb.read_reg(REG_DAC_WIDTH)
+    assert value == 0x0000_0123
+
+
+@cocotb.test()
+async def simple_controller_config_write(dut):
+    tb = TB(dut)
+    await tb.reset()
+
+    await tb.write_reg(REG_DAC_WIDTH, 0x10)
+    await tb.write_reg(REG_DAC_PERIOD, 0x40)
+    await tb.write_reg(REG_DAC_PULSE_NUM, 3)
+    await tb.write_reg(REG_DAC_PULSE_HEIGHT, 0x7FF)
+    await tb.write_reg(REG_ADC_PERIOD, 0x80)
+    await tb.write_reg(REG_WINDOW_SIZE, 16)
+
+    assert await tb.read_reg(REG_DAC_WIDTH) == 0x10
+    assert await tb.read_reg(REG_WINDOW_SIZE) == 16
+
+    # write data: set cfg_bus_valid signal
+    await tb.write_reg(REG_CONTROL, 1 << CTRL_CFG_BUS_VALID)
+
+    # wait
+    for _ in range(30):
+        await RisingEdge(dut.ctrl_clk)
+
+    # check config
+    assert int(dut.dac_pulse_width) == 0x10
+    assert int(dut.dac_pulse_period) == 0x40
+    assert int(dut.dac_pulse_num) == 3
+    assert int(dut.dac_pulse_height) == 0x7FF
+    assert int(dut.adc_pulse_period) == 0x80
+    assert int(dut.adc_window_size) == 16
+
+    await RisingEdge(dut.ctrl_clk)
+
+
+@cocotb.test()
+async def simple_controller_start_check(dut):
+    tb = TB(dut)
+    await tb.reset()
+    await tb.write_reg(REG_CONTROL, 1 << CTRL_START)
+
+    await RisingEdge(dut.dac_start)
+
+@cocotb.test()
+async def test_dma_write(dut):
+    tb = TB(dut)
+    await tb.reset()
+
+    data = bytes(range(64))
+
+    #write data into memory
+
+    await tb.write_reg(REG_DESC_WRITE_ADDR, 0x1000)
+    await tb.write_reg(REG_DESC_WRITE_LEN_AND_TAG, 64)
+
+
+    await tb.write_reg(REG_CONTROL, 1 << CTRL_SEND_DESC_WRITE)
+    await RisingEdge(dut.ctrl_clk)
+    cocotb.start_soon(tb.axis_source.send(data))
+
+    for _ in range(200):
+        await tb.write_reg( REG_CONTROL, 1 << CTRL_TAKE_STATUS_WRITE)
+
+        await RisingEdge(dut.ctrl_clk)
+
+        status = await tb.read_reg( REG_STATUS_WRITE_LEN)
+        if status == 64:
+            break
+
+    else:
+        assert False, "DMA timeout"
+    
+
+    mem = await tb.mem.read( 0x1000, 64)
+    assert mem == data
+
+@cocotb.test()
+async def test_dma_read(dut):
+    tb = TB(dut)
+    await tb.reset()
+
+    data = bytes(range(64))
+
+    #read data from memory
+
+    await tb.mem.write( 0x2000, data)
+
+    await tb.write_reg( REG_DESC_READ_ADDR, 0x2000)
+    await tb.write_reg( REG_DESC_READ_LEN, 64)
+    await tb.write_reg( REG_DESC_READ_CONFIG, 1)
+
+    await tb.write_reg( REG_CONTROL, 1 << CTRL_SEND_DESC_READ)
+
+    frame = await tb.axis_sink.recv()
+    assert frame.data == data
+
+    await tb.write_reg(
+        REG_CONTROL,
+        1 << CTRL_TAKE_STATUS_READ
+    )
+
+    for _ in range(100):
+
+        status = await tb.read_reg(
+            REG_READ_STATUS
+        )
+
+        if status != 0:
+            break
+
+        await RisingEdge(dut.ctrl_clk)
+    else:
+        assert False, "DMA read status timeout"
+
+
+
+
+

designs/controller_dma_connective/tests/test_timing.xdc

@@ -0,0 +1,13 @@
+# Primary clocks
+create_clock -name eth_clk -period 8.000  [get_ports eth_clk_in]
+create_clock -name dac_clk -period 7.692  [get_ports dac_clk_in]
+create_clock -name adc_clk -period 15.385 [get_ports adc_clk_in]
+
+
+# Asynchronous clock groups
+# eth, dac, adc are independent domains
+
+set_clock_groups -name ASYNC_ETH_DAC_ADC -asynchronous \
+    -group [get_clocks eth_clk] \
+    -group [get_clocks dac_clk] \
+    -group [get_clocks adc_clk]

designs/reflectometer_base/Makefile

@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: MIT
+#
+# Copyright (c) 2025 FPGA Ninja, LLC
+#
+# Authors:
+# - Alex Forencich
+#
+
+# FPGA settings
+FPGA_PART = xc7a100tfgg484-2
+FPGA_TOP = reflectometer_top
+FPGA_ARCH = artix7
+
+RTL_DIR = ../../rtl
+
+
+include ../../scripts/vivado.mk
+
+SYN_FILES += reflectometer.sv
+SYN_FILES += $(sort $(shell find ../../rtl -type f \( -name '*.v' -o -name '*.sv' \)))
+
+XCI_FILES = $(sort $(shell find ../../rtl/ethernet-udp/src -type f -name '*.xci'))
+XCI_FILES += $(sort $(shell find ip/ -type f -name '*.xci'))
+
+XDC_FILES += ../../constraints/ax7102.xdc
+XDC_FILES += debug.xdc
+
+
+
+program: $(PROJECT).bit
+	echo "open_hw_manager" > program.tcl
+	echo "connect_hw_server" >> program.tcl
+	echo "open_hw_target" >> program.tcl
+	echo "current_hw_device [lindex [get_hw_devices] 0]" >> program.tcl
+	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> program.tcl
+	echo "set_property PROGRAM.FILE {$(PROJECT).bit} [current_hw_device]" >> program.tcl
+	echo "program_hw_devices [current_hw_device]" >> program.tcl
+	echo "exit" >> program.tcl
+	vivado -nojournal -nolog -mode batch -source program.tcl
+
+$(PROJECT).mcs $(PROJECT).prm: $(PROJECT).bit
+	echo "write_cfgmem -force -format mcs -size 16 -interface SPIx4 -loadbit {up 0x0000000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
+	echo "exit" >> generate_mcs.tcl
+	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
+	mkdir -p rev
+	COUNT=100; \
+	while [ -e rev/$*_rev$$COUNT.bit ]; \
+	do COUNT=$$((COUNT+1)); done; \
+	COUNT=$$((COUNT-1)); \
+	for x in .mcs .prm; \
+	do cp $*$$x rev/$*_rev$$COUNT$$x; \
+	echo "Output: rev/$*_rev$$COUNT$$x"; done;

designs/reflectometer_base/README.md

@@ -0,0 +1,145 @@
+# Рефлектометр
+
+Модуль представляет собой законченную встраиваемую систему рефлектометра, объединяющую:
+
+- контроллер управления
+- генератор импульсов (DAC path)
+- сэмплер данных (ADC path)
+- аккумулятор и обработчик данных
+
+Система предназначена для формирования импульсов, синхронного сбора отраженного сигнала, накопления результатов и передачи обработанных данных во внешнюю систему.
+
+Данный модуль является полноценным интегрируемым блоком, который может использоваться как самостоятельная аппаратная подсистема внутри более крупного проекта.
+
+---
+
+## Назначение системы
+
+Основная задача системы:
+
+1. Получить параметры измерения через AXI Stream
+2. Сформировать последовательность импульсов на DAC
+3. Выполнить синходную выборку данных с ADC
+4. Накопить и обработать результаты
+5. Передать итоговые данные обратно через AXI Stream
+
+Таким образом реализуется полный цикл измерения без необходимости внешнего управления отдельными блоками.
+
+---
+
+## Состав системы
+
+### Controller
+
+Принимает входные команды по AXI Stream (Ethernet RX), декодирует параметры измерения и управляет всеми внутренними модулями системы.
+
+Формирует:
+
+- запуск генератора (`dac_start`)
+- запуск аккумулятора (`adc_start`)
+- параметры импульсов DAC
+- параметры выборки ADC
+- локальные reset-сигналы
+
+---
+
+### Generator
+
+Формирует последовательность импульсов на DAC с заданными:
+
+- амплитудой
+- длительностью
+- периодом
+- количеством повторений
+
+Для каждого импульса инициирует запуск выборки в сэмплере.
+
+---
+
+### Sampler
+
+Выполняет синхронный сбор данных с ADC по запросу генератора.
+
+Поддерживает:
+
+- фильтрацию `out_of_range`
+- упаковку данных
+- преобразование типа кода ( прямой или дополнительный)
+
+---
+
+### Accumulator
+
+Получает поток данных от сэмплера, выполняет накопление, усреднение и оконную обработку, после чего формирует пакеты для передачи результата.
+
+---
+
+## Управление системой
+
+Пользователь взаимодействует только с контроллером через AXI Stream-интерфейс.
+
+Прямое управление генератором, сэмплером и аккумулятором не требуется.
+
+---
+
+## Clock Domain Crossing (CDC)
+
+Система работает в нескольких тактовых доменах:
+
+- Ethernet RX (`gmii_rx_clk`)
+- Ethernet TX (`gmii_tx_clk`)
+- DAC (`dac_clk`)
+- ADC (`adc_clk`)
+
+Для корректной синхронизации между DAC и ADC используются специальные CDC-регистры для сигналов:
+
+- `sample_req`
+- `sample_done`
+
+Это обеспечивает безопасную передачу handshake-сигналов между тактовыми доменами.
+
+---
+
+## Список параметров
+
+### DAC_DATA_WIDTH
+Ширина выходных данных отправляемых на ЦАП.
+
+### ZERO_LEVEL
+Уровень сигнала в состоянии отсутствия импульса (базовый уровень сигнала).
+
+Типовые значения:
+
+- `8192` — середина диапазона ЦАП
+- `0` — нулевой уровень
+
+### ADC_DATA_WIDTH
+Ширина входных данных, получаемых с АЦП.
+
+### PACK_FACTOR
+Количество отсчетов, собираемых в один выходной пакет.
+
+### PROCESS_MODE
+Режим интерпретации входного кода:
+
+- `0` — прямой код
+- `1` — дополнительный код
+
+### ACCUM_WIDTH 
+Размер данных для аккумуляции, должен быть степенью числа 2. По умолчанию - 32
+
+### N_MAX 
+Максимальное число окон в последовательности. Должно быть степенью числа 2. Влияет на размер используемой памяти.
+
+### WINDOW_SIZE 
+Размер окна усреднения
+
+### PACKET_SIZE 
+Размер выходного пакета
+
+---
+
+## Сборка
+```make all``` - собрать все до битстрима
+
+```make vivado``` - открыть проект в Vivado

designs/reflectometer_base/debug.xdc

@@ -0,0 +1 @@
+set_clock_groups -name ASYNC_UDP_CTRL -asynchronous -group [get_clocks rgmii_rxc] -group [get_clocks clk_out1_clk_wiz_ctrl_inst] -group [get_clocks clk_out2_clk_wiz_ctrl_inst]

designs/reflectometer_base/ip/clk_wiz_ctrl_inst.xci

@@ -0,0 +1,689 @@
+{
+  "schema": "xilinx.com:schema:json_instance:1.0",
+  "ip_inst": {
+    "xci_name": "clk_wiz_ctrl_inst",
+    "component_reference": "xilinx.com:ip:clk_wiz:6.0",
+    "ip_revision": "16",
+    "gen_directory": "../../../../eth_generator_top.gen/sources_1/ip/clk_wiz_ctrl_inst",
+    "parameters": {
+      "component_parameters": {
+        "Component_Name": [ { "value": "clk_wiz_ctrl_inst", "resolve_type": "user", "usage": "all" } ],
+        "USER_CLK_FREQ0": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "USER_CLK_FREQ1": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "USER_CLK_FREQ2": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "USER_CLK_FREQ3": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "ENABLE_CLOCK_MONITOR": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "OPTIMIZE_CLOCKING_STRUCTURE_EN": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "ENABLE_USER_CLOCK0": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "ENABLE_USER_CLOCK1": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "ENABLE_USER_CLOCK2": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "ENABLE_USER_CLOCK3": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "Enable_PLL0": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "Enable_PLL1": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "REF_CLK_FREQ": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PRECISION": [ { "value": "1", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PRIMITIVE": [ { "value": "MMCM", "resolve_type": "user", "usage": "all" } ],
+        "PRIMTYPE_SEL": [ { "value": "mmcm_adv", "resolve_type": "user", "usage": "all" } ],
+        "CLOCK_MGR_TYPE": [ { "value": "auto", "resolve_type": "user", "usage": "all" } ],
+        "USE_FREQ_SYNTH": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_SPREAD_SPECTRUM": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_PHASE_ALIGNMENT": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_MIN_POWER": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_DYN_PHASE_SHIFT": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_DYN_RECONFIG": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "JITTER_SEL": [ { "value": "No_Jitter", "resolve_type": "user", "usage": "all" } ],
+        "PRIM_IN_FREQ": [ { "value": "200.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PRIM_IN_TIMEPERIOD": [ { "value": "10.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "IN_FREQ_UNITS": [ { "value": "Units_MHz", "resolve_type": "user", "usage": "all" } ],
+        "PHASESHIFT_MODE": [ { "value": "WAVEFORM", "resolve_type": "user", "usage": "all" } ],
+        "IN_JITTER_UNITS": [ { "value": "Units_UI", "resolve_type": "user", "usage": "all" } ],
+        "RELATIVE_INCLK": [ { "value": "REL_PRIMARY", "resolve_type": "user", "usage": "all" } ],
+        "USE_INCLK_SWITCHOVER": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "SECONDARY_IN_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "SECONDARY_IN_TIMEPERIOD": [ { "value": "10.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "SECONDARY_PORT": [ { "value": "clk_in2", "resolve_type": "user", "usage": "all" } ],
+        "SECONDARY_SOURCE": [ { "value": "Single_ended_clock_capable_pin", "resolve_type": "user", "usage": "all" } ],
+        "JITTER_OPTIONS": [ { "value": "UI", "resolve_type": "user", "usage": "all" } ],
+        "CLKIN1_UI_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKIN2_UI_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PRIM_IN_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "SECONDARY_IN_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKIN1_JITTER_PS": [ { "value": "50.0", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKIN2_JITTER_PS": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT1_USED": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT2_USED": [ { "value": "true", "value_src": "user", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT3_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT4_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT5_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT6_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT7_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "NUM_OUT_CLKS": [ { "value": "2", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "CLK_OUT1_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLK_OUT2_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLK_OUT3_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLK_OUT4_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLK_OUT5_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLK_OUT6_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLK_OUT7_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "PRIMARY_PORT": [ { "value": "clk_in1", "resolve_type": "user", "usage": "all" } ],
+        "CLK_OUT1_PORT": [ { "value": "clk_out1", "resolve_type": "user", "usage": "all" } ],
+        "CLK_OUT2_PORT": [ { "value": "clk_out2", "resolve_type": "user", "usage": "all" } ],
+        "CLK_OUT3_PORT": [ { "value": "clk_out3", "resolve_type": "user", "usage": "all" } ],
+        "CLK_OUT4_PORT": [ { "value": "clk_out4", "resolve_type": "user", "usage": "all" } ],
+        "CLK_OUT5_PORT": [ { "value": "clk_out5", "resolve_type": "user", "usage": "all" } ],
+        "CLK_OUT6_PORT": [ { "value": "clk_out6", "resolve_type": "user", "usage": "all" } ],
+        "CLK_OUT7_PORT": [ { "value": "clk_out7", "resolve_type": "user", "usage": "all" } ],
+        "DADDR_PORT": [ { "value": "daddr", "resolve_type": "user", "usage": "all" } ],
+        "DCLK_PORT": [ { "value": "dclk", "resolve_type": "user", "usage": "all" } ],
+        "DRDY_PORT": [ { "value": "drdy", "resolve_type": "user", "usage": "all" } ],
+        "DWE_PORT": [ { "value": "dwe", "resolve_type": "user", "usage": "all" } ],
+        "DIN_PORT": [ { "value": "din", "resolve_type": "user", "usage": "all" } ],
+        "DOUT_PORT": [ { "value": "dout", "resolve_type": "user", "usage": "all" } ],
+        "DEN_PORT": [ { "value": "den", "resolve_type": "user", "usage": "all" } ],
+        "PSCLK_PORT": [ { "value": "psclk", "resolve_type": "user", "usage": "all" } ],
+        "PSEN_PORT": [ { "value": "psen", "resolve_type": "user", "usage": "all" } ],
+        "PSINCDEC_PORT": [ { "value": "psincdec", "resolve_type": "user", "usage": "all" } ],
+        "PSDONE_PORT": [ { "value": "psdone", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT1_REQUESTED_OUT_FREQ": [ { "value": "125", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT1_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT1_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT2_REQUESTED_OUT_FREQ": [ { "value": "65.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT2_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT2_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT3_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT3_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT3_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT4_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT4_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT4_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT5_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT5_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT5_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT6_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT6_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT6_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT7_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT7_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT7_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "USE_MAX_I_JITTER": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_MIN_O_JITTER": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT1_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT2_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT3_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT4_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT5_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT6_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT7_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "PRIM_SOURCE": [ { "value": "Single_ended_clock_capable_pin", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT1_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT2_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT3_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT4_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT5_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT6_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT7_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "FEEDBACK_SOURCE": [ { "value": "FDBK_AUTO", "resolve_type": "user", "usage": "all" } ],
+        "CLKFB_IN_SIGNALING": [ { "value": "SINGLE", "resolve_type": "user", "usage": "all" } ],
+        "CLKFB_IN_PORT": [ { "value": "clkfb_in", "resolve_type": "user", "usage": "all" } ],
+        "CLKFB_IN_P_PORT": [ { "value": "clkfb_in_p", "resolve_type": "user", "usage": "all" } ],
+        "CLKFB_IN_N_PORT": [ { "value": "clkfb_in_n", "resolve_type": "user", "usage": "all" } ],
+        "CLKFB_OUT_PORT": [ { "value": "clkfb_out", "resolve_type": "user", "usage": "all" } ],
+        "CLKFB_OUT_P_PORT": [ { "value": "clkfb_out_p", "resolve_type": "user", "usage": "all" } ],
+        "CLKFB_OUT_N_PORT": [ { "value": "clkfb_out_n", "resolve_type": "user", "usage": "all" } ],
+        "PLATFORM": [ { "value": "UNKNOWN", "resolve_type": "user", "usage": "all" } ],
+        "SUMMARY_STRINGS": [ { "value": "empty", "resolve_type": "user", "usage": "all" } ],
+        "USE_LOCKED": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CALC_DONE": [ { "value": "empty", "resolve_type": "user", "usage": "all" } ],
+        "USE_RESET": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_POWER_DOWN": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_STATUS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_FREEZE": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_CLK_VALID": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_INCLK_STOPPED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_CLKFB_STOPPED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "RESET_PORT": [ { "value": "reset", "resolve_type": "user", "usage": "all" } ],
+        "LOCKED_PORT": [ { "value": "locked", "resolve_type": "user", "usage": "all" } ],
+        "POWER_DOWN_PORT": [ { "value": "power_down", "resolve_type": "user", "usage": "all" } ],
+        "CLK_VALID_PORT": [ { "value": "CLK_VALID", "resolve_type": "user", "usage": "all" } ],
+        "STATUS_PORT": [ { "value": "STATUS", "resolve_type": "user", "usage": "all" } ],
+        "CLK_IN_SEL_PORT": [ { "value": "clk_in_sel", "resolve_type": "user", "usage": "all" } ],
+        "INPUT_CLK_STOPPED_PORT": [ { "value": "input_clk_stopped", "resolve_type": "user", "usage": "all" } ],
+        "CLKFB_STOPPED_PORT": [ { "value": "clkfb_stopped", "resolve_type": "user", "usage": "all" } ],
+        "SS_MODE": [ { "value": "CENTER_HIGH", "resolve_type": "user", "usage": "all" } ],
+        "SS_MOD_FREQ": [ { "value": "250", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "SS_MOD_TIME": [ { "value": "0.004", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "OVERRIDE_MMCM": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_NOTES": [ { "value": "None", "resolve_type": "user", "usage": "all" } ],
+        "MMCM_DIVCLK_DIVIDE": [ { "value": "4", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "user", "usage": "all" } ],
+        "MMCM_CLKFBOUT_MULT_F": [ { "value": "16.875", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKFBOUT_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_CLKIN1_PERIOD": [ { "value": "5.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKIN2_PERIOD": [ { "value": "10.0", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT4_CASCADE": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_CLOCK_HOLD": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_COMPENSATION": [ { "value": "ZHOLD", "resolve_type": "user", "usage": "all" } ],
+        "MMCM_REF_JITTER1": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_REF_JITTER2": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_STARTUP_WAIT": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_CLKOUT0_DIVIDE_F": [ { "value": "6.750", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT0_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT0_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_CLKOUT1_DIVIDE": [ { "value": "13", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_CLKOUT1_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT1_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_CLKOUT2_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT2_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_CLKOUT3_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT3_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_CLKOUT4_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT4_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_CLKOUT5_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_CLKOUT5_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT5_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_CLKOUT6_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_CLKOUT6_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT6_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT6_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "OVERRIDE_PLL": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "PLL_NOTES": [ { "value": "None", "resolve_type": "user", "usage": "all" } ],
+        "PLL_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "user", "usage": "all" } ],
+        "PLL_CLKFBOUT_MULT": [ { "value": "4", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "PLL_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLK_FEEDBACK": [ { "value": "CLKFBOUT", "resolve_type": "user", "usage": "all" } ],
+        "PLL_DIVCLK_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "PLL_CLKIN_PERIOD": [ { "value": "10.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_COMPENSATION": [ { "value": "SYSTEM_SYNCHRONOUS", "resolve_type": "user", "usage": "all" } ],
+        "PLL_REF_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT0_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "PLL_CLKOUT0_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT1_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "PLL_CLKOUT1_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "PLL_CLKOUT2_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "PLL_CLKOUT3_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "PLL_CLKOUT4_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT5_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "PLL_CLKOUT5_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "RESET_TYPE": [ { "value": "ACTIVE_HIGH", "resolve_type": "user", "usage": "all" } ],
+        "USE_SAFE_CLOCK_STARTUP": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_CLOCK_SEQUENCING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT1_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "CLKOUT2_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "CLKOUT3_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "CLKOUT4_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "CLKOUT5_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "CLKOUT6_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "CLKOUT7_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "USE_BOARD_FLOW": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLK_IN1_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
+        "CLK_IN2_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
+        "DIFF_CLK_IN1_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
+        "DIFF_CLK_IN2_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
+        "AUTO_PRIMITIVE": [ { "value": "MMCM", "resolve_type": "user", "usage": "all" } ],
+        "RESET_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
+        "ENABLE_CDDC": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CDDCDONE_PORT": [ { "value": "cddcdone", "resolve_type": "user", "usage": "all" } ],
+        "CDDCREQ_PORT": [ { "value": "cddcreq", "resolve_type": "user", "usage": "all" } ],
+        "ENABLE_CLKOUTPHY": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUTPHY_REQUESTED_FREQ": [ { "value": "600.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT1_JITTER": [ { "value": "162.582", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT1_PHASE_ERROR": [ { "value": "137.238", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT2_JITTER": [ { "value": "185.296", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT2_PHASE_ERROR": [ { "value": "137.238", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT3_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT3_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT4_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT4_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT5_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT5_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT6_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT6_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT7_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT7_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "INPUT_MODE": [ { "value": "frequency", "resolve_type": "user", "usage": "all" } ],
+        "INTERFACE_SELECTION": [ { "value": "Enable_AXI", "resolve_type": "user", "usage": "all" } ],
+        "AXI_DRP": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "PHASE_DUTY_CONFIG": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ]
+      },
+      "model_parameters": {
+        "C_CLKOUT2_USED": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USER_CLK_FREQ0": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_AUTO_PRIMITIVE": [ { "value": "MMCM", "resolve_type": "generated", "usage": "all" } ],
+        "C_USER_CLK_FREQ1": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_USER_CLK_FREQ2": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_USER_CLK_FREQ3": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_ENABLE_CLOCK_MONITOR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_ENABLE_USER_CLOCK0": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_ENABLE_USER_CLOCK1": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_ENABLE_USER_CLOCK2": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_ENABLE_USER_CLOCK3": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_Enable_PLL0": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_Enable_PLL1": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_REF_CLK_FREQ": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PRECISION": [ { "value": "1", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT3_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT4_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT5_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT6_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT7_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_CLKOUT1_BAR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_CLKOUT2_BAR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_CLKOUT3_BAR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_CLKOUT4_BAR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "c_component_name": [ { "value": "clk_wiz_ctrl_inst", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLATFORM": [ { "value": "UNKNOWN", "resolve_type": "generated", "usage": "all" } ],
+        "C_USE_FREQ_SYNTH": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_PHASE_ALIGNMENT": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PRIM_IN_JITTER": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_SECONDARY_IN_JITTER": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_JITTER_SEL": [ { "value": "No_Jitter", "resolve_type": "generated", "usage": "all" } ],
+        "C_USE_MIN_POWER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_MIN_O_JITTER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_MAX_I_JITTER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_DYN_PHASE_SHIFT": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_OPTIMIZE_CLOCKING_STRUCTURE_EN": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_INCLK_SWITCHOVER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_DYN_RECONFIG": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_SPREAD_SPECTRUM": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_FAST_SIMULATION": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PRIMTYPE_SEL": [ { "value": "AUTO", "resolve_type": "generated", "usage": "all" } ],
+        "C_USE_CLK_VALID": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PRIM_IN_FREQ": [ { "value": "200.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PRIM_IN_TIMEPERIOD": [ { "value": "10.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_IN_FREQ_UNITS": [ { "value": "Units_MHz", "resolve_type": "generated", "usage": "all" } ],
+        "C_SECONDARY_IN_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_SECONDARY_IN_TIMEPERIOD": [ { "value": "10.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_FEEDBACK_SOURCE": [ { "value": "FDBK_AUTO", "resolve_type": "generated", "usage": "all" } ],
+        "C_PRIM_SOURCE": [ { "value": "Single_ended_clock_capable_pin", "resolve_type": "generated", "usage": "all" } ],
+        "C_PHASESHIFT_MODE": [ { "value": "WAVEFORM", "resolve_type": "generated", "usage": "all" } ],
+        "C_SECONDARY_SOURCE": [ { "value": "Single_ended_clock_capable_pin", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFB_IN_SIGNALING": [ { "value": "SINGLE", "resolve_type": "generated", "usage": "all" } ],
+        "C_USE_RESET": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_RESET_LOW": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_LOCKED": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_INCLK_STOPPED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_CLKFB_STOPPED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_POWER_DOWN": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_STATUS": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_FREEZE": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_NUM_OUT_CLKS": [ { "value": "2", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT1_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT2_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT3_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT4_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT5_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT6_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT7_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_INCLK_SUM_ROW0": [ { "value": "Input Clock   Freq (MHz)    Input Jitter (UI)", "resolve_type": "generated", "usage": "all" } ],
+        "C_INCLK_SUM_ROW1": [ { "value": "__primary_________200.000____________0.010", "resolve_type": "generated", "usage": "all" } ],
+        "C_INCLK_SUM_ROW2": [ { "value": "no_secondary_input_clock ", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW0A": [ { "value": " Output     Output      Phase    Duty Cycle   Pk-to-Pk     Phase", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW0B": [ { "value": "  Clock     Freq (MHz)  (degrees)    (%)     Jitter (ps)  Error (ps)", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW1": [ { "value": "clk_out1__125.00000______0.000______50.0______162.582____137.238", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW2": [ { "value": "clk_out2__64.90385______0.000______50.0______185.296____137.238", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW3": [ { "value": "no_CLK_OUT3_output", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW4": [ { "value": "no_CLK_OUT4_output", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW5": [ { "value": "no_CLK_OUT5_output", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW6": [ { "value": "no_CLK_OUT6_output", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW7": [ { "value": "no_CLK_OUT7_output", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT1_REQUESTED_OUT_FREQ": [ { "value": "125", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT2_REQUESTED_OUT_FREQ": [ { "value": "65.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT3_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT4_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT5_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT6_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT7_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT1_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT2_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT3_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT4_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT5_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT6_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT7_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT1_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT2_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT3_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT4_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT5_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT6_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT7_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT1_OUT_FREQ": [ { "value": "125.00000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT2_OUT_FREQ": [ { "value": "64.90385", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT3_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT4_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT5_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT6_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT7_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT6_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT7_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT1_DUTY_CYCLE": [ { "value": "50.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT2_DUTY_CYCLE": [ { "value": "50.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT3_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT4_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT5_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT6_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT7_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_USE_SAFE_CLOCK_STARTUP": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_CLOCK_SEQUENCING": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT1_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT2_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT3_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT4_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT5_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT6_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT7_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_NOTES": [ { "value": "None", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_CLKFBOUT_MULT_F": [ { "value": "16.875", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKIN1_PERIOD": [ { "value": "5.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKIN2_PERIOD": [ { "value": "10.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT4_CASCADE": [ { "value": "FALSE", "resolve_type": "generated", "format": "bool", "usage": "all" } ],
+        "C_MMCM_CLOCK_HOLD": [ { "value": "FALSE", "resolve_type": "generated", "format": "bool", "usage": "all" } ],
+        "C_MMCM_COMPENSATION": [ { "value": "ZHOLD", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_DIVCLK_DIVIDE": [ { "value": "4", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_REF_JITTER1": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_REF_JITTER2": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_STARTUP_WAIT": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_CLKOUT0_DIVIDE_F": [ { "value": "6.750", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT1_DIVIDE": [ { "value": "13", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_CLKOUT5_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_CLKOUT6_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_CLKOUT0_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT1_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT2_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT3_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT4_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT5_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT6_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT6_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKFBOUT_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_CLKOUT0_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_CLKOUT1_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_CLKOUT2_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_CLKOUT3_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_CLKOUT4_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_CLKOUT5_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_CLKOUT6_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLL_NOTES": [ { "value": "No notes", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLL_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLL_CLK_FEEDBACK": [ { "value": "CLKFBOUT", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLL_CLKFBOUT_MULT": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PLL_CLKIN_PERIOD": [ { "value": "1.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_COMPENSATION": [ { "value": "SYSTEM_SYNCHRONOUS", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLL_DIVCLK_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PLL_REF_JITTER": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT0_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PLL_CLKOUT1_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PLL_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PLL_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PLL_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PLL_CLKOUT5_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PLL_CLKOUT0_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT1_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT2_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT3_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT4_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT5_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLOCK_MGR_TYPE": [ { "value": "NA", "resolve_type": "generated", "usage": "all" } ],
+        "C_OVERRIDE_MMCM": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_OVERRIDE_PLL": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PRIMARY_PORT": [ { "value": "clk_in1", "resolve_type": "generated", "usage": "all" } ],
+        "C_SECONDARY_PORT": [ { "value": "clk_in2", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_OUT1_PORT": [ { "value": "clk_out1", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_OUT2_PORT": [ { "value": "clk_out2", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_OUT3_PORT": [ { "value": "clk_out3", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_OUT4_PORT": [ { "value": "clk_out4", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_OUT5_PORT": [ { "value": "clk_out5", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_OUT6_PORT": [ { "value": "clk_out6", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_OUT7_PORT": [ { "value": "clk_out7", "resolve_type": "generated", "usage": "all" } ],
+        "C_RESET_PORT": [ { "value": "reset", "resolve_type": "generated", "usage": "all" } ],
+        "C_LOCKED_PORT": [ { "value": "locked", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFB_IN_PORT": [ { "value": "clkfb_in", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFB_IN_P_PORT": [ { "value": "clkfb_in_p", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFB_IN_N_PORT": [ { "value": "clkfb_in_n", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFB_OUT_PORT": [ { "value": "clkfb_out", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFB_OUT_P_PORT": [ { "value": "clkfb_out_p", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFB_OUT_N_PORT": [ { "value": "clkfb_out_n", "resolve_type": "generated", "usage": "all" } ],
+        "C_POWER_DOWN_PORT": [ { "value": "power_down", "resolve_type": "generated", "usage": "all" } ],
+        "C_DADDR_PORT": [ { "value": "daddr", "resolve_type": "generated", "usage": "all" } ],
+        "C_DCLK_PORT": [ { "value": "dclk", "resolve_type": "generated", "usage": "all" } ],
+        "C_DRDY_PORT": [ { "value": "drdy", "resolve_type": "generated", "usage": "all" } ],
+        "C_DWE_PORT": [ { "value": "dwe", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIN_PORT": [ { "value": "din", "resolve_type": "generated", "usage": "all" } ],
+        "C_DOUT_PORT": [ { "value": "dout", "resolve_type": "generated", "usage": "all" } ],
+        "C_DEN_PORT": [ { "value": "den", "resolve_type": "generated", "usage": "all" } ],
+        "C_PSCLK_PORT": [ { "value": "psclk", "resolve_type": "generated", "usage": "all" } ],
+        "C_PSEN_PORT": [ { "value": "psen", "resolve_type": "generated", "usage": "all" } ],
+        "C_PSINCDEC_PORT": [ { "value": "psincdec", "resolve_type": "generated", "usage": "all" } ],
+        "C_PSDONE_PORT": [ { "value": "psdone", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_VALID_PORT": [ { "value": "CLK_VALID", "resolve_type": "generated", "usage": "all" } ],
+        "C_STATUS_PORT": [ { "value": "STATUS", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_IN_SEL_PORT": [ { "value": "clk_in_sel", "resolve_type": "generated", "usage": "all" } ],
+        "C_INPUT_CLK_STOPPED_PORT": [ { "value": "input_clk_stopped", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFB_STOPPED_PORT": [ { "value": "clkfb_stopped", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKIN1_JITTER_PS": [ { "value": "50.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKIN2_JITTER_PS": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PRIMITIVE": [ { "value": "MMCM", "resolve_type": "generated", "usage": "all" } ],
+        "C_SS_MODE": [ { "value": "CENTER_HIGH", "resolve_type": "generated", "usage": "all" } ],
+        "C_SS_MOD_PERIOD": [ { "value": "4000", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_SS_MOD_TIME": [ { "value": "0.004", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_HAS_CDDC": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CDDCDONE_PORT": [ { "value": "cddcdone", "resolve_type": "generated", "usage": "all" } ],
+        "C_CDDCREQ_PORT": [ { "value": "cddcreq", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUTPHY_MODE": [ { "value": "VCO", "resolve_type": "generated", "usage": "all" } ],
+        "C_ENABLE_CLKOUTPHY": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_INTERFACE_SELECTION": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_S_AXI_ADDR_WIDTH": [ { "value": "11", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_S_AXI_DATA_WIDTH": [ { "value": "32", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_POWER_REG": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT0_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT0_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT1_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT1_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT2_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT2_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT3_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT3_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT4_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT4_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT5_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT5_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT6_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT6_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFBOUT_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFBOUT_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVCLK": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_LOCK_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_LOCK_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_LOCK_3": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_FILTER_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_FILTER_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE1_AUTO": [ { "value": "1", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE2_AUTO": [ { "value": "1.9259259259259258", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE3_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE4_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE5_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE6_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE7_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLLBUFGCEDIV": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCMBUFGCEDIV": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLLBUFGCEDIV1": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLLBUFGCEDIV2": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLLBUFGCEDIV3": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLLBUFGCEDIV4": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCMBUFGCEDIV1": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCMBUFGCEDIV2": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCMBUFGCEDIV3": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCMBUFGCEDIV4": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCMBUFGCEDIV5": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCMBUFGCEDIV6": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCMBUFGCEDIV7": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT1_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT2_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT3_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT4_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT5_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT6_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT7_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT0_ACTUAL_FREQ": [ { "value": "125.00000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT1_ACTUAL_FREQ": [ { "value": "64.90385", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT2_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT3_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT4_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT5_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT6_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
+        "C_M_MAX": [ { "value": "64.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_M_MIN": [ { "value": "2.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_D_MAX": [ { "value": "80.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_D_MIN": [ { "value": "1.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_O_MAX": [ { "value": "128.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_O_MIN": [ { "value": "1.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_VCO_MIN": [ { "value": "600.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_VCO_MAX": [ { "value": "1200.000", "resolve_type": "generated", "format": "float", "usage": "all" } ]
+      },
+      "project_parameters": {
+        "ARCHITECTURE": [ { "value": "artix7" } ],
+        "BASE_BOARD_PART": [ { "value": "" } ],
+        "BOARD_CONNECTIONS": [ { "value": "" } ],
+        "DEVICE": [ { "value": "xc7a35t" } ],
+        "PACKAGE": [ { "value": "fgg484" } ],
+        "PREFHDL": [ { "value": "VERILOG" } ],
+        "SILICON_REVISION": [ { "value": "" } ],
+        "SIMULATOR_LANGUAGE": [ { "value": "MIXED" } ],
+        "SPEEDGRADE": [ { "value": "-1" } ],
+        "STATIC_POWER": [ { "value": "" } ],
+        "TEMPERATURE_GRADE": [ { "value": "" } ]
+      },
+      "runtime_parameters": {
+        "IPCONTEXT": [ { "value": "IP_Flow" } ],
+        "IPREVISION": [ { "value": "16" } ],
+        "MANAGED": [ { "value": "TRUE" } ],
+        "OUTPUTDIR": [ { "value": "../../../../eth_generator_top.gen/sources_1/ip/clk_wiz_ctrl_inst" } ],
+        "SELECTEDSIMMODEL": [ { "value": "" } ],
+        "SHAREDDIR": [ { "value": "." } ],
+        "SWVERSION": [ { "value": "2025.1" } ],
+        "SYNTHESISFLOW": [ { "value": "OUT_OF_CONTEXT" } ]
+      }
+    },
+    "boundary": {
+      "ports": {
+        "reset": [ { "direction": "in", "driver_value": "0" } ],
+        "clk_in1": [ { "direction": "in" } ],
+        "clk_out1": [ { "direction": "out" } ],
+        "clk_out2": [ { "direction": "out" } ],
+        "locked": [ { "direction": "out" } ]
+      },
+      "interfaces": {
+        "reset": {
+          "vlnv": "xilinx.com:signal:reset:1.0",
+          "abstraction_type": "xilinx.com:signal:reset_rtl:1.0",
+          "mode": "slave",
+          "parameters": {
+            "POLARITY": [ { "value": "ACTIVE_HIGH", "value_src": "constant", "usage": "all" } ],
+            "BOARD.ASSOCIATED_PARAM": [ { "value": "RESET_BOARD_INTERFACE", "value_src": "constant", "usage": "all" } ],
+            "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
+          },
+          "port_maps": {
+            "RST": [ { "physical_name": "reset" } ]
+          }
+        },
+        "clock_CLK_IN1": {
+          "vlnv": "xilinx.com:signal:clock:1.0",
+          "abstraction_type": "xilinx.com:signal:clock_rtl:1.0",
+          "mode": "slave",
+          "parameters": {
+            "FREQ_HZ": [ { "value": "100000000", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
+            "FREQ_TOLERANCE_HZ": [ { "value": "0", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
+            "PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
+            "CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_BUSIF": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_PORT": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_RESET": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ],
+            "BOARD.ASSOCIATED_PARAM": [ { "value": "CLK_IN1_BOARD_INTERFACE", "usage": "all", "is_static_object": false } ]
+          },
+          "port_maps": {
+            "CLK_IN1": [ { "physical_name": "clk_in1" } ]
+          }
+        },
+        "clock_CLK_OUT1": {
+          "vlnv": "xilinx.com:signal:clock:1.0",
+          "abstraction_type": "xilinx.com:signal:clock_rtl:1.0",
+          "mode": "master",
+          "parameters": {
+            "FREQ_HZ": [ { "value": "100000000", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
+            "FREQ_TOLERANCE_HZ": [ { "value": "0", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
+            "PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
+            "CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_BUSIF": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_PORT": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_RESET": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
+          },
+          "port_maps": {
+            "CLK_OUT1": [ { "physical_name": "clk_out1" } ]
+          }
+        },
+        "clock_CLK_OUT2": {
+          "vlnv": "xilinx.com:signal:clock:1.0",
+          "abstraction_type": "xilinx.com:signal:clock_rtl:1.0",
+          "mode": "master",
+          "parameters": {
+            "FREQ_HZ": [ { "value": "100000000", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
+            "FREQ_TOLERANCE_HZ": [ { "value": "0", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
+            "PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
+            "CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_BUSIF": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_PORT": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_RESET": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
+          },
+          "port_maps": {
+            "CLK_OUT2": [ { "physical_name": "clk_out2" } ]
+          }
+        }
+      }
+    }
+  }
+}

designs/reflectometer_base/reflectometer.sv

@@ -0,0 +1,320 @@
+`timescale 1 ns / 1 ns
+
+module reflectometer_top #(
+    parameter int unsigned DAC_DATA_WIDTH = 14,
+    parameter int unsigned ADC_DATA_WIDTH = 12,
+    parameter PACK_FACTOR = 1,
+    parameter PROCESS_MODE = 0,
+    parameter ZERO_LEVEL = 8192,
+    parameter ACCUM_WIDTH = 32,
+    parameter N_MAX = 4096,
+    parameter WINDOW_SIZE = 65,
+    parameter PACKET_SIZE = 1024
+)(
+    input               sys_clk,
+    input               rst_n,
+
+    output [3:0]        led,
+
+    input gmii_rx_clk,
+    input gmii_tx_clk,
+
+    (* MARK_DEBUG="true" *) output logic [7:0]  s_axis_tx_tdata,
+    (* MARK_DEBUG="true" *) output logic        s_axis_tx_tvalid,
+    (* MARK_DEBUG="true" *) input  logic        s_axis_tx_tready,
+    (* MARK_DEBUG="true" *) output logic        s_axis_tx_tlast,
+
+    (* MARK_DEBUG="true" *) input  wire [7:0]  m_axis_rx_tdata,
+    (* MARK_DEBUG="true" *) input  wire        m_axis_rx_tvalid,
+    (* MARK_DEBUG="true" *) input  wire        m_axis_rx_tlast,
+    (* MARK_DEBUG="true" *) output wire        m_axis_rx_tready,
+
+    // axis_mac
+
+    (* MARK_DEBUG="true" *) input logic       req_ready,
+    (* MARK_DEBUG="true" *) output logic       send_req,
+
+    // DAC
+
+    output wire p2_clk,
+    (* MARK_DEBUG="true" *) output     wire [DAC_DATA_WIDTH-1:0]       p2_data,
+    (* MARK_DEBUG="true" *) output     wire p2_wrt,
+
+    // ADC
+    output ch2_clk,
+    (* MARK_DEBUG="true" *) input [ADC_DATA_WIDTH-1:0] ch2_data,
+    input ch2_otr
+
+);
+
+    // -------------------------------------------------------------------------
+    // IDELAYCTRL
+    // -------------------------------------------------------------------------
+    (* IODELAY_GROUP = "rgmii_idelay_group" *)
+    IDELAYCTRL IDELAYCTRL_inst (
+        .RDY    (),
+        .REFCLK (sys_clk),
+        .RST    (1'b0)
+    );
+
+    // -------------------------------------------------------------------------
+    // Generated clocks for controller
+    // Need to create this IP in Vivado:
+    //  input : 200 MHz
+    //  output0: 130 MHz
+    //  output1: 65 MHz
+    // -------------------------------------------------------------------------
+    wire dac_clk;
+    wire adc_clk;
+    wire clk_wiz_locked;
+
+    clk_wiz_ctrl_inst clk_wiz_ctrl_inst (
+        .clk_in1   (sys_clk),
+        .reset    (~rst_n),
+        .clk_out1  (dac_clk),   // 130 MHz
+        .clk_out2  (adc_clk),   // 65 MHz
+        .locked    (clk_wiz_locked)
+    );
+
+    // -------------------------------------------------------------------------
+    // axis_mac interface
+    // RX stream from Ethernet goes into controller
+    // TX stream is unused for now
+    // -------------------------------------------------------------------------
+
+
+    // -------------------------------------------------------------------------
+    // Controller reset
+    // Use both external reset and clk_wiz lock
+    // -------------------------------------------------------------------------
+    wire ctrl_rst_n = rst_n & clk_wiz_locked;
+
+
+    (* MARK_DEBUG="true" *) logic        finish;
+
+    // Controller outputs to debug
+    (* MARK_DEBUG="true" *) wire [31:0]               dac_pulse_width;
+    (* MARK_DEBUG="true" *) wire [31:0]               dac_pulse_period;
+    (* MARK_DEBUG="true" *) wire [DAC_DATA_WIDTH-1:0] dac_pulse_height;
+    (* MARK_DEBUG="true" *) wire [15:0]               dac_pulse_num;
+
+    (* MARK_DEBUG="true" *) wire [31:0]               adc_pulse_period;
+    (* MARK_DEBUG="true" *) wire [15:0]               adc_pulse_num;
+
+    (* MARK_DEBUG="true" *) wire                      dac_start;
+    (* MARK_DEBUG="true" *) wire                      adc_start;
+    (* MARK_DEBUG="true" *) wire                      dac_rst;
+    (* MARK_DEBUG="true" *) wire                      adc_rst;
+
+
+    // -------------------------------------------------------------------------
+    // Controller
+    // ETH domain = gmii_rx_clk, because RX AXI master comes from axis_mac RX side
+    // -------------------------------------------------------------------------
+    control #(
+        .DAC_DATA_WIDTH(DAC_DATA_WIDTH)
+    ) udp_ctrl_inst (
+        .eth_clk_in        (gmii_rx_clk),
+        .dac_clk_in        (dac_clk),
+        .adc_clk_in        (adc_clk),
+        .rst_n             (ctrl_rst_n),
+
+        .s_axis_tdata      (m_axis_rx_tdata),
+        .s_axis_tvalid     (m_axis_rx_tvalid),
+        .s_axis_tready     (m_axis_rx_tready),
+        .s_axis_tlast      (m_axis_rx_tlast),
+
+        .finish            (finish),
+
+        .dac_pulse_width   (dac_pulse_width),
+        .dac_pulse_period  (dac_pulse_period),
+        .dac_pulse_height  (dac_pulse_height),
+        .dac_pulse_num     (dac_pulse_num),
+
+        .adc_pulse_period  (adc_pulse_period),
+        .adc_pulse_num     (adc_pulse_num),
+
+        .dac_start         (dac_start),
+        .adc_start         (adc_start),
+
+        .dac_rst           (dac_rst),
+        .adc_rst           (adc_rst)
+    );
+
+    // -------------------------------------------------------------------------
+    // DAC
+    // -------------------------------------------------------------------------
+
+   (* MARK_DEBUG="true" *) logic sample_req;
+   (* MARK_DEBUG="true" *) logic sample_req_sync1;
+   (* MARK_DEBUG="true" *) logic sample_req_sync2;
+   (* MARK_DEBUG="true" *) logic sample_req_sync3;
+
+   (* MARK_DEBUG="true" *) logic sample_done;
+   (* MARK_DEBUG="true" *) logic sample_done_sync1;
+   (* MARK_DEBUG="true" *) logic sample_done_sync2;
+   (* MARK_DEBUG="true" *) logic sample_done_sync3;
+
+   //------------------------------------------------------------
+    // DAC -> ADC CDC
+    //------------------------------------------------------------
+    always_ff @(posedge adc_clk or posedge adc_rst) begin
+        if (adc_rst) begin
+            sample_req <= 1'b0;
+            sample_req_sync2  <= 1'b0;
+            sample_req_sync3 <= 1'b0;
+        end
+        else begin
+            sample_req_sync2 <= sample_req_sync1;
+            sample_req_sync3  <= sample_req_sync2;
+            sample_req <= sample_req_sync3;
+        end
+    end
+
+     //------------------------------------------------------------
+    // ADC -> DAC CDC
+    //------------------------------------------------------------
+    always_ff @(posedge dac_clk or posedge dac_rst) begin
+        if (dac_rst) begin
+            sample_done <= 1'b0;
+            sample_done_sync2 <= 1'b0;
+            sample_done_sync3 <= 1'b0;
+        end
+        else begin
+            sample_done_sync2 <= sample_done_sync1;
+            sample_done_sync3 <= sample_done_sync2;
+            sample_done <= sample_done_sync3;
+        end
+    end
+
+     //------------------------------------------------------------
+    // Generator
+    //------------------------------------------------------------
+
+    generator #(
+        .DATA_WIDTH(DAC_DATA_WIDTH),
+        .ZERO_LEVEL(ZERO_LEVEL)
+    ) generator_inst (
+        .clk_in(dac_clk),
+        .rst(dac_rst),
+        .start(dac_start),
+        .pulse_width(dac_pulse_width),
+        .pulse_period(dac_pulse_period),
+        .pulse_height(dac_pulse_height),
+        .pulse_num(dac_pulse_num),
+        .pulse(p2_wrt),
+        .pulse_height_out(p2_data),
+        .sample_done(sample_done),
+        .sample_req(sample_req_sync1)
+    );
+
+    wire ch2_clk_oddr;
+
+    ODDR #(
+        .DDR_CLK_EDGE("SAME_EDGE"),
+        .INIT(1'b0),
+        .SRTYPE("SYNC")
+    ) ODDR_ch2_clk (
+        .Q (ch2_clk_oddr),
+        .C (adc_clk),
+        .CE(1'b1),
+        .D1(1'b1),
+        .D2(1'b0),
+        .R (1'b0),
+        .S (1'b0)
+    );
+
+    OBUF OBUF_ch2_clk (
+        .I(ch2_clk_oddr),
+        .O(ch2_clk)
+    );
+
+    wire p2_clk_oddr;
+
+    ODDR #(
+        .DDR_CLK_EDGE("SAME_EDGE"),
+        .INIT(1'b0),
+        .SRTYPE("SYNC")
+    ) ODDR_p2_clk (
+        .Q (p2_clk_oddr),
+        .C (dac_clk),
+        .CE(1'b1),
+        .D1(1'b1),
+        .D2(1'b0),
+        .R (1'b0),
+        .S (1'b0)
+    );
+
+    OBUF OBUF_p2_clk (
+        .I(p2_clk_oddr),
+        .O(p2_clk)
+    );
+
+// -------------------------------------------------------------------------
+    // ADC
+    // -------------------------------------------------------------------------
+
+    (* MARK_DEBUG="true" *) logic [ADC_DATA_WIDTH*PACK_FACTOR-1:0]  accum_m_axis_tdata;
+    (* MARK_DEBUG="true" *) logic acum_m_axis_tvalid;
+
+    sampler 
+    #(
+        .DATA_WIDTH(ADC_DATA_WIDTH),
+        .PACK_FACTOR(PACK_FACTOR),
+        .PROCESS_MODE(PROCESS_MODE)
+    )
+    sampler_dut
+    (
+       .clk_in(adc_clk),
+       .rst(adc_rst),
+       .data_in(ch2_data),
+       .out_of_range(ch2_otr),
+       .m_axis_tdata(accum_m_axis_tdata),
+       .m_axis_tvalid(acum_m_axis_tvalid),
+        .smp_num(adc_pulse_period),
+        .sample_req(sample_req),
+        .sample_done(sample_done_sync1)
+    );
+
+    // -------------------------------------------------------------------------
+    // Accumulator
+    // -------------------------------------------------------------------------
+
+    accumulator_top
+    #(
+        .DATA_WIDTH(ADC_DATA_WIDTH),
+        .ACCUM_WIDTH(ACCUM_WIDTH),
+        .N_MAX(N_MAX),
+        .WINDOW_SIZE(WINDOW_SIZE),
+        .PACKET_SIZE(PACKET_SIZE)
+    )
+    accumulator_top_dut
+    (
+        .clk_in(adc_clk),
+        .rst(adc_rst),
+        .s_axis_tdata(accum_m_axis_tdata),
+        .s_axis_tvalid(acum_m_axis_tvalid),
+        .start(adc_start),
+        .smp_num(adc_pulse_period),
+        .seq_num(adc_pulse_num),
+
+        .eth_clk_in(gmii_tx_clk),
+        .req_ready(req_ready),
+        .send_req(send_req),
+        .m_axis_tdata(s_axis_tx_tdata),
+        .m_axis_tvalid(s_axis_tx_tvalid),
+        .m_axis_tready(s_axis_tx_tready),
+        .m_axis_tlast(s_axis_tx_tlast),
+
+        .finish(finish)
+    );
+
+
+    // -------------------------------------------------------------------------
+    // Simple LED status
+    // -------------------------------------------------------------------------
+    assign led[0] = clk_wiz_locked;
+    assign led[1] = m_axis_rx_tvalid;
+    assign led[2] = dac_start;
+
+endmodule

designs/reflectometer_prototype/Makefile

@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: MIT
+#
+# Copyright (c) 2025 FPGA Ninja, LLC
+#
+# Authors:
+# - Alex Forencich
+#
+
+# FPGA settings
+FPGA_PART = xc7a100tfgg484-2
+FPGA_TOP = prototype_top
+FPGA_ARCH = artix7
+
+RTL_DIR = ../../rtl
+
+
+include ../../scripts/vivado.mk
+
+SYN_FILES += prototype.sv
+SYN_FILES += ../reflectometer_base/reflectometer.sv
+SYN_FILES += $(sort $(shell find ../../rtl -type f \( -name '*.v' -o -name '*.sv' \)))
+
+XCI_FILES = $(sort $(shell find ../../rtl/ethernet-udp/src -type f -name '*.xci'))
+XCI_FILES += $(sort $(shell find ip/ -type f -name '*.xci'))
+
+XDC_FILES += ../../constraints/ax7102.xdc
+XDC_FILES += debug.xdc
+
+
+
+program: $(PROJECT).bit
+	echo "open_hw_manager" > program.tcl
+	echo "connect_hw_server" >> program.tcl
+	echo "open_hw_target" >> program.tcl
+	echo "current_hw_device [lindex [get_hw_devices] 0]" >> program.tcl
+	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> program.tcl
+	echo "set_property PROGRAM.FILE {$(PROJECT).bit} [current_hw_device]" >> program.tcl
+	echo "program_hw_devices [current_hw_device]" >> program.tcl
+	echo "exit" >> program.tcl
+	vivado -nojournal -nolog -mode batch -source program.tcl
+
+$(PROJECT).mcs $(PROJECT).prm: $(PROJECT).bit
+	echo "write_cfgmem -force -format mcs -size 16 -interface SPIx4 -loadbit {up 0x0000000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
+	echo "exit" >> generate_mcs.tcl
+	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
+	mkdir -p rev
+	COUNT=100; \
+	while [ -e rev/$*_rev$$COUNT.bit ]; \
+	do COUNT=$$((COUNT+1)); done; \
+	COUNT=$$((COUNT-1)); \
+	for x in .mcs .prm; \
+	do cp $*$$x rev/$*_rev$$COUNT$$x; \
+	echo "Output: rev/$*_rev$$COUNT$$x"; done;

designs/reflectometer_prototype/README.md

@@ -0,0 +1,13 @@
+# Тестовый проект рефлектометра
+Проект состоит из AXIS Ethernet и основной части рефлектометра - генератора, сэмплера, контроллера и синхронизирующей логики. Разработан для AX7102, АЦП AN9238, ЦАП AD9767. Плата подключается по ethernet к компьютеру, IP должен быть 192.168.0.3 у компьютера, в ПЛИС установлен IP 192.168.0.2, после подключения должен пройти ARP и после этого можно начнить коммуникацию через консольку.
+## Сборка
+```make all``` - собрать все до битстрима
+
+```make vivado``` - открыть проект в Vivado
+
+## Управление
+Используйте software/console.py. Примеры:
+
+```python3 console.py --pulse_width 3500 --pulse_period 20000 --pulse_height 15000 --pulse_num 550 --dac-bits 14```
+
+```python3 console.py --pulse_width 15000 --pulse_period 20000 --pulse_height 1500 --pulse_num 550 --dac-bits 14```

designs/reflectometer_prototype/debug.xdc

@@ -0,0 +1,238 @@
+set_clock_groups -name ASYNC_UDP_CTRL -asynchronous -group [get_clocks rx_clk] -group [get_clocks clk_out1_clk_wiz_ctrl_inst] -group [get_clocks clk_out2_clk_wiz_ctrl_inst]
+
+
+
+
+connect_debug_port u_ila_0/clk [get_nets [list clk_wiz_ctrl_inst/inst/clk_out2]]
+connect_debug_port u_ila_0/probe0 [get_nets [list {accumulator_top_dut/output_async_fifo/wr_state[0]} {accumulator_top_dut/output_async_fifo/wr_state[1]} {accumulator_top_dut/output_async_fifo/wr_state[2]}]]
+connect_debug_port u_ila_0/probe1 [get_nets [list {sampler_dut/smp_num_reg[0]} {sampler_dut/smp_num_reg[1]} {sampler_dut/smp_num_reg[2]} {sampler_dut/smp_num_reg[3]} {sampler_dut/smp_num_reg[4]} {sampler_dut/smp_num_reg[5]} {sampler_dut/smp_num_reg[6]} {sampler_dut/smp_num_reg[7]} {sampler_dut/smp_num_reg[8]} {sampler_dut/smp_num_reg[9]} {sampler_dut/smp_num_reg[10]} {sampler_dut/smp_num_reg[11]} {sampler_dut/smp_num_reg[12]} {sampler_dut/smp_num_reg[13]} {sampler_dut/smp_num_reg[14]} {sampler_dut/smp_num_reg[15]} {sampler_dut/smp_num_reg[16]} {sampler_dut/smp_num_reg[17]} {sampler_dut/smp_num_reg[18]} {sampler_dut/smp_num_reg[19]} {sampler_dut/smp_num_reg[20]} {sampler_dut/smp_num_reg[21]} {sampler_dut/smp_num_reg[22]} {sampler_dut/smp_num_reg[23]} {sampler_dut/smp_num_reg[24]} {sampler_dut/smp_num_reg[25]} {sampler_dut/smp_num_reg[26]} {sampler_dut/smp_num_reg[27]} {sampler_dut/smp_num_reg[28]} {sampler_dut/smp_num_reg[29]} {sampler_dut/smp_num_reg[30]} {sampler_dut/smp_num_reg[31]}]]
+connect_debug_port u_ila_0/probe2 [get_nets [list {adc_pulse_num[0]} {adc_pulse_num[1]} {adc_pulse_num[2]} {adc_pulse_num[3]} {adc_pulse_num[4]} {adc_pulse_num[5]} {adc_pulse_num[6]} {adc_pulse_num[7]} {adc_pulse_num[8]} {adc_pulse_num[9]} {adc_pulse_num[10]} {adc_pulse_num[11]} {adc_pulse_num[12]} {adc_pulse_num[13]} {adc_pulse_num[14]} {adc_pulse_num[15]}]]
+connect_debug_port u_ila_0/probe4 [get_nets [list {accum_m_axis_tdata[0]} {accum_m_axis_tdata[1]} {accum_m_axis_tdata[2]} {accum_m_axis_tdata[3]} {accum_m_axis_tdata[4]} {accum_m_axis_tdata[5]} {accum_m_axis_tdata[6]} {accum_m_axis_tdata[7]} {accum_m_axis_tdata[8]} {accum_m_axis_tdata[9]} {accum_m_axis_tdata[10]} {accum_m_axis_tdata[11]}]]
+connect_debug_port u_ila_0/probe5 [get_nets [list {sampler_dut/cnt_smp_num[0]} {sampler_dut/cnt_smp_num[1]} {sampler_dut/cnt_smp_num[2]} {sampler_dut/cnt_smp_num[3]} {sampler_dut/cnt_smp_num[4]} {sampler_dut/cnt_smp_num[5]} {sampler_dut/cnt_smp_num[6]} {sampler_dut/cnt_smp_num[7]} {sampler_dut/cnt_smp_num[8]} {sampler_dut/cnt_smp_num[9]} {sampler_dut/cnt_smp_num[10]} {sampler_dut/cnt_smp_num[11]} {sampler_dut/cnt_smp_num[12]} {sampler_dut/cnt_smp_num[13]} {sampler_dut/cnt_smp_num[14]} {sampler_dut/cnt_smp_num[15]} {sampler_dut/cnt_smp_num[16]} {sampler_dut/cnt_smp_num[17]} {sampler_dut/cnt_smp_num[18]} {sampler_dut/cnt_smp_num[19]} {sampler_dut/cnt_smp_num[20]} {sampler_dut/cnt_smp_num[21]} {sampler_dut/cnt_smp_num[22]} {sampler_dut/cnt_smp_num[23]} {sampler_dut/cnt_smp_num[24]} {sampler_dut/cnt_smp_num[25]} {sampler_dut/cnt_smp_num[26]} {sampler_dut/cnt_smp_num[27]} {sampler_dut/cnt_smp_num[28]} {sampler_dut/cnt_smp_num[29]} {sampler_dut/cnt_smp_num[30]} {sampler_dut/cnt_smp_num[31]}]]
+connect_debug_port u_ila_0/probe6 [get_nets [list {sampler_dut/data_converted[0]} {sampler_dut/data_converted[1]} {sampler_dut/data_converted[2]} {sampler_dut/data_converted[3]} {sampler_dut/data_converted[4]} {sampler_dut/data_converted[5]} {sampler_dut/data_converted[6]} {sampler_dut/data_converted[7]} {sampler_dut/data_converted[8]} {sampler_dut/data_converted[9]} {sampler_dut/data_converted[10]} {sampler_dut/data_converted[11]}]]
+connect_debug_port u_ila_0/probe7 [get_nets [list {adc_pulse_period[0]} {adc_pulse_period[1]} {adc_pulse_period[2]} {adc_pulse_period[3]} {adc_pulse_period[4]} {adc_pulse_period[5]} {adc_pulse_period[6]} {adc_pulse_period[7]} {adc_pulse_period[8]} {adc_pulse_period[9]} {adc_pulse_period[10]} {adc_pulse_period[11]} {adc_pulse_period[12]} {adc_pulse_period[13]} {adc_pulse_period[14]} {adc_pulse_period[15]} {adc_pulse_period[16]} {adc_pulse_period[17]} {adc_pulse_period[18]} {adc_pulse_period[19]} {adc_pulse_period[20]} {adc_pulse_period[21]} {adc_pulse_period[22]} {adc_pulse_period[23]} {adc_pulse_period[24]} {adc_pulse_period[25]} {adc_pulse_period[26]} {adc_pulse_period[27]} {adc_pulse_period[28]} {adc_pulse_period[29]} {adc_pulse_period[30]} {adc_pulse_period[31]}]]
+connect_debug_port u_ila_0/probe8 [get_nets [list {accumulator_top_dut/accum_main/wr_state[0]} {accumulator_top_dut/accum_main/wr_state[1]} {accumulator_top_dut/accum_main/wr_state[2]} {accumulator_top_dut/accum_main/wr_state[3]}]]
+connect_debug_port u_ila_0/probe9 [get_nets [list {accumulator_top_dut/accum_main/adder_dut/cnt[0]} {accumulator_top_dut/accum_main/adder_dut/cnt[1]} {accumulator_top_dut/accum_main/adder_dut/cnt[2]} {accumulator_top_dut/accum_main/adder_dut/cnt[3]} {accumulator_top_dut/accum_main/adder_dut/cnt[4]} {accumulator_top_dut/accum_main/adder_dut/cnt[5]} {accumulator_top_dut/accum_main/adder_dut/cnt[6]} {accumulator_top_dut/accum_main/adder_dut/cnt[7]} {accumulator_top_dut/accum_main/adder_dut/cnt[8]} {accumulator_top_dut/accum_main/adder_dut/cnt[9]} {accumulator_top_dut/accum_main/adder_dut/cnt[10]} {accumulator_top_dut/accum_main/adder_dut/cnt[11]} {accumulator_top_dut/accum_main/adder_dut/cnt[12]} {accumulator_top_dut/accum_main/adder_dut/cnt[13]} {accumulator_top_dut/accum_main/adder_dut/cnt[14]} {accumulator_top_dut/accum_main/adder_dut/cnt[15]}]]
+connect_debug_port u_ila_0/probe10 [get_nets [list acum_m_axis_tvalid]]
+connect_debug_port u_ila_0/probe11 [get_nets [list adc_rst]]
+connect_debug_port u_ila_0/probe12 [get_nets [list adc_start]]
+connect_debug_port u_ila_0/probe13 [get_nets [list sampler_dut/enable]]
+connect_debug_port u_ila_0/probe14 [get_nets [list finish]]
+connect_debug_port u_ila_0/probe15 [get_nets [list sampler_dut/out_of_range_reg]]
+connect_debug_port u_ila_0/probe16 [get_nets [list sample_req]]
+connect_debug_port u_ila_1/clk [get_nets [list clk_wiz_ctrl_inst/inst/clk_out1]]
+connect_debug_port u_ila_1/probe0 [get_nets [list {generator_inst/pulse_num_reg[0]} {generator_inst/pulse_num_reg[1]} {generator_inst/pulse_num_reg[2]} {generator_inst/pulse_num_reg[3]} {generator_inst/pulse_num_reg[4]} {generator_inst/pulse_num_reg[5]} {generator_inst/pulse_num_reg[6]} {generator_inst/pulse_num_reg[7]} {generator_inst/pulse_num_reg[8]} {generator_inst/pulse_num_reg[9]} {generator_inst/pulse_num_reg[10]} {generator_inst/pulse_num_reg[11]} {generator_inst/pulse_num_reg[12]} {generator_inst/pulse_num_reg[13]} {generator_inst/pulse_num_reg[14]} {generator_inst/pulse_num_reg[15]}]]
+connect_debug_port u_ila_1/probe1 [get_nets [list {dac_pulse_num[0]} {dac_pulse_num[1]} {dac_pulse_num[2]} {dac_pulse_num[3]} {dac_pulse_num[4]} {dac_pulse_num[5]} {dac_pulse_num[6]} {dac_pulse_num[7]} {dac_pulse_num[8]} {dac_pulse_num[9]} {dac_pulse_num[10]} {dac_pulse_num[11]} {dac_pulse_num[12]} {dac_pulse_num[13]} {dac_pulse_num[14]} {dac_pulse_num[15]}]]
+connect_debug_port u_ila_1/probe2 [get_nets [list {dac_pulse_period[0]} {dac_pulse_period[1]} {dac_pulse_period[2]} {dac_pulse_period[3]} {dac_pulse_period[4]} {dac_pulse_period[5]} {dac_pulse_period[6]} {dac_pulse_period[7]} {dac_pulse_period[8]} {dac_pulse_period[9]} {dac_pulse_period[10]} {dac_pulse_period[11]} {dac_pulse_period[12]} {dac_pulse_period[13]} {dac_pulse_period[14]} {dac_pulse_period[15]} {dac_pulse_period[16]} {dac_pulse_period[17]} {dac_pulse_period[18]} {dac_pulse_period[19]} {dac_pulse_period[20]} {dac_pulse_period[21]} {dac_pulse_period[22]} {dac_pulse_period[23]} {dac_pulse_period[24]} {dac_pulse_period[25]} {dac_pulse_period[26]} {dac_pulse_period[27]} {dac_pulse_period[28]} {dac_pulse_period[29]} {dac_pulse_period[30]} {dac_pulse_period[31]}]]
+connect_debug_port u_ila_1/probe3 [get_nets [list {dac_pulse_width[0]} {dac_pulse_width[1]} {dac_pulse_width[2]} {dac_pulse_width[3]} {dac_pulse_width[4]} {dac_pulse_width[5]} {dac_pulse_width[6]} {dac_pulse_width[7]} {dac_pulse_width[8]} {dac_pulse_width[9]} {dac_pulse_width[10]} {dac_pulse_width[11]} {dac_pulse_width[12]} {dac_pulse_width[13]} {dac_pulse_width[14]} {dac_pulse_width[15]} {dac_pulse_width[16]} {dac_pulse_width[17]} {dac_pulse_width[18]} {dac_pulse_width[19]} {dac_pulse_width[20]} {dac_pulse_width[21]} {dac_pulse_width[22]} {dac_pulse_width[23]} {dac_pulse_width[24]} {dac_pulse_width[25]} {dac_pulse_width[26]} {dac_pulse_width[27]} {dac_pulse_width[28]} {dac_pulse_width[29]} {dac_pulse_width[30]} {dac_pulse_width[31]}]]
+connect_debug_port u_ila_1/probe4 [get_nets [list {generator_inst/cnt_pulse_num[0]} {generator_inst/cnt_pulse_num[1]} {generator_inst/cnt_pulse_num[2]} {generator_inst/cnt_pulse_num[3]} {generator_inst/cnt_pulse_num[4]} {generator_inst/cnt_pulse_num[5]} {generator_inst/cnt_pulse_num[6]} {generator_inst/cnt_pulse_num[7]} {generator_inst/cnt_pulse_num[8]} {generator_inst/cnt_pulse_num[9]} {generator_inst/cnt_pulse_num[10]} {generator_inst/cnt_pulse_num[11]} {generator_inst/cnt_pulse_num[12]} {generator_inst/cnt_pulse_num[13]} {generator_inst/cnt_pulse_num[14]} {generator_inst/cnt_pulse_num[15]}]]
+connect_debug_port u_ila_1/probe5 [get_nets [list {generator_inst/pulse_width_reg[0]} {generator_inst/pulse_width_reg[1]} {generator_inst/pulse_width_reg[2]} {generator_inst/pulse_width_reg[3]} {generator_inst/pulse_width_reg[4]} {generator_inst/pulse_width_reg[5]} {generator_inst/pulse_width_reg[6]} {generator_inst/pulse_width_reg[7]} {generator_inst/pulse_width_reg[8]} {generator_inst/pulse_width_reg[9]} {generator_inst/pulse_width_reg[10]} {generator_inst/pulse_width_reg[11]} {generator_inst/pulse_width_reg[12]} {generator_inst/pulse_width_reg[13]} {generator_inst/pulse_width_reg[14]} {generator_inst/pulse_width_reg[15]} {generator_inst/pulse_width_reg[16]} {generator_inst/pulse_width_reg[17]} {generator_inst/pulse_width_reg[18]} {generator_inst/pulse_width_reg[19]} {generator_inst/pulse_width_reg[20]} {generator_inst/pulse_width_reg[21]} {generator_inst/pulse_width_reg[22]} {generator_inst/pulse_width_reg[23]} {generator_inst/pulse_width_reg[24]} {generator_inst/pulse_width_reg[25]} {generator_inst/pulse_width_reg[26]} {generator_inst/pulse_width_reg[27]} {generator_inst/pulse_width_reg[28]} {generator_inst/pulse_width_reg[29]} {generator_inst/pulse_width_reg[30]} {generator_inst/pulse_width_reg[31]}]]
+connect_debug_port u_ila_1/probe6 [get_nets [list {generator_inst/pulse_period_reg[0]} {generator_inst/pulse_period_reg[1]} {generator_inst/pulse_period_reg[2]} {generator_inst/pulse_period_reg[3]} {generator_inst/pulse_period_reg[4]} {generator_inst/pulse_period_reg[5]} {generator_inst/pulse_period_reg[6]} {generator_inst/pulse_period_reg[7]} {generator_inst/pulse_period_reg[8]} {generator_inst/pulse_period_reg[9]} {generator_inst/pulse_period_reg[10]} {generator_inst/pulse_period_reg[11]} {generator_inst/pulse_period_reg[12]} {generator_inst/pulse_period_reg[13]} {generator_inst/pulse_period_reg[14]} {generator_inst/pulse_period_reg[15]} {generator_inst/pulse_period_reg[16]} {generator_inst/pulse_period_reg[17]} {generator_inst/pulse_period_reg[18]} {generator_inst/pulse_period_reg[19]} {generator_inst/pulse_period_reg[20]} {generator_inst/pulse_period_reg[21]} {generator_inst/pulse_period_reg[22]} {generator_inst/pulse_period_reg[23]} {generator_inst/pulse_period_reg[24]} {generator_inst/pulse_period_reg[25]} {generator_inst/pulse_period_reg[26]} {generator_inst/pulse_period_reg[27]} {generator_inst/pulse_period_reg[28]} {generator_inst/pulse_period_reg[29]} {generator_inst/pulse_period_reg[30]} {generator_inst/pulse_period_reg[31]}]]
+connect_debug_port u_ila_1/probe7 [get_nets [list {generator_inst/cnt_period[0]} {generator_inst/cnt_period[1]} {generator_inst/cnt_period[2]} {generator_inst/cnt_period[3]} {generator_inst/cnt_period[4]} {generator_inst/cnt_period[5]} {generator_inst/cnt_period[6]} {generator_inst/cnt_period[7]} {generator_inst/cnt_period[8]} {generator_inst/cnt_period[9]} {generator_inst/cnt_period[10]} {generator_inst/cnt_period[11]} {generator_inst/cnt_period[12]} {generator_inst/cnt_period[13]} {generator_inst/cnt_period[14]} {generator_inst/cnt_period[15]} {generator_inst/cnt_period[16]} {generator_inst/cnt_period[17]} {generator_inst/cnt_period[18]} {generator_inst/cnt_period[19]} {generator_inst/cnt_period[20]} {generator_inst/cnt_period[21]} {generator_inst/cnt_period[22]} {generator_inst/cnt_period[23]} {generator_inst/cnt_period[24]} {generator_inst/cnt_period[25]} {generator_inst/cnt_period[26]} {generator_inst/cnt_period[27]} {generator_inst/cnt_period[28]} {generator_inst/cnt_period[29]} {generator_inst/cnt_period[30]} {generator_inst/cnt_period[31]}]]
+connect_debug_port u_ila_1/probe8 [get_nets [list dac_rst]]
+connect_debug_port u_ila_1/probe9 [get_nets [list dac_start]]
+connect_debug_port u_ila_1/probe10 [get_nets [list debug_dac_OBUF]]
+connect_debug_port u_ila_1/probe11 [get_nets [list generator_inst/enable]]
+connect_debug_port u_ila_1/probe12 [get_nets [list sample_done]]
+connect_debug_port u_ila_2/clk [get_nets [list rgmii_rxc_IBUF_BUFG]]
+connect_debug_port u_ila_2/probe0 [get_nets [list {accumulator_top_dut/output_async_fifo/rd_state[0]} {accumulator_top_dut/output_async_fifo/rd_state[1]} {accumulator_top_dut/output_async_fifo/rd_state[2]}]]
+connect_debug_port dbg_hub/clk [get_nets rgmii_rxc_IBUF_BUFG]
+
+create_debug_core u_ila_0 ila
+set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_0]
+set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_0]
+set_property C_ADV_TRIGGER false [get_debug_cores u_ila_0]
+set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_0]
+set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_0]
+set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_0]
+set_property C_TRIGIN_EN false [get_debug_cores u_ila_0]
+set_property C_TRIGOUT_EN false [get_debug_cores u_ila_0]
+set_property port_width 1 [get_debug_ports u_ila_0/clk]
+connect_debug_port u_ila_0/clk [get_nets [list reflectometer_inst/clk_wiz_ctrl_inst/inst/clk_out2]]
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe0]
+set_property port_width 4 [get_debug_ports u_ila_0/probe0]
+connect_debug_port u_ila_0/probe0 [get_nets [list {reflectometer_inst/accumulator_top_dut/accum_main/wr_state[0]} {reflectometer_inst/accumulator_top_dut/accum_main/wr_state[1]} {reflectometer_inst/accumulator_top_dut/accum_main/wr_state[2]} {reflectometer_inst/accumulator_top_dut/accum_main/wr_state[3]}]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe1]
+set_property port_width 3 [get_debug_ports u_ila_0/probe1]
+connect_debug_port u_ila_0/probe1 [get_nets [list {reflectometer_inst/accumulator_top_dut/output_async_fifo/wr_state[0]} {reflectometer_inst/accumulator_top_dut/output_async_fifo/wr_state[1]} {reflectometer_inst/accumulator_top_dut/output_async_fifo/wr_state[2]}]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe2]
+set_property port_width 32 [get_debug_ports u_ila_0/probe2]
+connect_debug_port u_ila_0/probe2 [get_nets [list {reflectometer_inst/sampler_dut/cnt_smp_num[0]} {reflectometer_inst/sampler_dut/cnt_smp_num[1]} {reflectometer_inst/sampler_dut/cnt_smp_num[2]} {reflectometer_inst/sampler_dut/cnt_smp_num[3]} {reflectometer_inst/sampler_dut/cnt_smp_num[4]} {reflectometer_inst/sampler_dut/cnt_smp_num[5]} {reflectometer_inst/sampler_dut/cnt_smp_num[6]} {reflectometer_inst/sampler_dut/cnt_smp_num[7]} {reflectometer_inst/sampler_dut/cnt_smp_num[8]} {reflectometer_inst/sampler_dut/cnt_smp_num[9]} {reflectometer_inst/sampler_dut/cnt_smp_num[10]} {reflectometer_inst/sampler_dut/cnt_smp_num[11]} {reflectometer_inst/sampler_dut/cnt_smp_num[12]} {reflectometer_inst/sampler_dut/cnt_smp_num[13]} {reflectometer_inst/sampler_dut/cnt_smp_num[14]} {reflectometer_inst/sampler_dut/cnt_smp_num[15]} {reflectometer_inst/sampler_dut/cnt_smp_num[16]} {reflectometer_inst/sampler_dut/cnt_smp_num[17]} {reflectometer_inst/sampler_dut/cnt_smp_num[18]} {reflectometer_inst/sampler_dut/cnt_smp_num[19]} {reflectometer_inst/sampler_dut/cnt_smp_num[20]} {reflectometer_inst/sampler_dut/cnt_smp_num[21]} {reflectometer_inst/sampler_dut/cnt_smp_num[22]} {reflectometer_inst/sampler_dut/cnt_smp_num[23]} {reflectometer_inst/sampler_dut/cnt_smp_num[24]} {reflectometer_inst/sampler_dut/cnt_smp_num[25]} {reflectometer_inst/sampler_dut/cnt_smp_num[26]} {reflectometer_inst/sampler_dut/cnt_smp_num[27]} {reflectometer_inst/sampler_dut/cnt_smp_num[28]} {reflectometer_inst/sampler_dut/cnt_smp_num[29]} {reflectometer_inst/sampler_dut/cnt_smp_num[30]} {reflectometer_inst/sampler_dut/cnt_smp_num[31]}]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe3]
+set_property port_width 12 [get_debug_ports u_ila_0/probe3]
+connect_debug_port u_ila_0/probe3 [get_nets [list {reflectometer_inst/sampler_dut/data_converted[0]} {reflectometer_inst/sampler_dut/data_converted[1]} {reflectometer_inst/sampler_dut/data_converted[2]} {reflectometer_inst/sampler_dut/data_converted[3]} {reflectometer_inst/sampler_dut/data_converted[4]} {reflectometer_inst/sampler_dut/data_converted[5]} {reflectometer_inst/sampler_dut/data_converted[6]} {reflectometer_inst/sampler_dut/data_converted[7]} {reflectometer_inst/sampler_dut/data_converted[8]} {reflectometer_inst/sampler_dut/data_converted[9]} {reflectometer_inst/sampler_dut/data_converted[10]} {reflectometer_inst/sampler_dut/data_converted[11]}]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe4]
+set_property port_width 32 [get_debug_ports u_ila_0/probe4]
+connect_debug_port u_ila_0/probe4 [get_nets [list {reflectometer_inst/sampler_dut/smp_num_reg[0]} {reflectometer_inst/sampler_dut/smp_num_reg[1]} {reflectometer_inst/sampler_dut/smp_num_reg[2]} {reflectometer_inst/sampler_dut/smp_num_reg[3]} {reflectometer_inst/sampler_dut/smp_num_reg[4]} {reflectometer_inst/sampler_dut/smp_num_reg[5]} {reflectometer_inst/sampler_dut/smp_num_reg[6]} {reflectometer_inst/sampler_dut/smp_num_reg[7]} {reflectometer_inst/sampler_dut/smp_num_reg[8]} {reflectometer_inst/sampler_dut/smp_num_reg[9]} {reflectometer_inst/sampler_dut/smp_num_reg[10]} {reflectometer_inst/sampler_dut/smp_num_reg[11]} {reflectometer_inst/sampler_dut/smp_num_reg[12]} {reflectometer_inst/sampler_dut/smp_num_reg[13]} {reflectometer_inst/sampler_dut/smp_num_reg[14]} {reflectometer_inst/sampler_dut/smp_num_reg[15]} {reflectometer_inst/sampler_dut/smp_num_reg[16]} {reflectometer_inst/sampler_dut/smp_num_reg[17]} {reflectometer_inst/sampler_dut/smp_num_reg[18]} {reflectometer_inst/sampler_dut/smp_num_reg[19]} {reflectometer_inst/sampler_dut/smp_num_reg[20]} {reflectometer_inst/sampler_dut/smp_num_reg[21]} {reflectometer_inst/sampler_dut/smp_num_reg[22]} {reflectometer_inst/sampler_dut/smp_num_reg[23]} {reflectometer_inst/sampler_dut/smp_num_reg[24]} {reflectometer_inst/sampler_dut/smp_num_reg[25]} {reflectometer_inst/sampler_dut/smp_num_reg[26]} {reflectometer_inst/sampler_dut/smp_num_reg[27]} {reflectometer_inst/sampler_dut/smp_num_reg[28]} {reflectometer_inst/sampler_dut/smp_num_reg[29]} {reflectometer_inst/sampler_dut/smp_num_reg[30]} {reflectometer_inst/sampler_dut/smp_num_reg[31]}]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe5]
+set_property port_width 12 [get_debug_ports u_ila_0/probe5]
+connect_debug_port u_ila_0/probe5 [get_nets [list {reflectometer_inst/accum_m_axis_tdata[0]} {reflectometer_inst/accum_m_axis_tdata[1]} {reflectometer_inst/accum_m_axis_tdata[2]} {reflectometer_inst/accum_m_axis_tdata[3]} {reflectometer_inst/accum_m_axis_tdata[4]} {reflectometer_inst/accum_m_axis_tdata[5]} {reflectometer_inst/accum_m_axis_tdata[6]} {reflectometer_inst/accum_m_axis_tdata[7]} {reflectometer_inst/accum_m_axis_tdata[8]} {reflectometer_inst/accum_m_axis_tdata[9]} {reflectometer_inst/accum_m_axis_tdata[10]} {reflectometer_inst/accum_m_axis_tdata[11]}]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe6]
+set_property port_width 16 [get_debug_ports u_ila_0/probe6]
+connect_debug_port u_ila_0/probe6 [get_nets [list {reflectometer_inst/adc_pulse_num[0]} {reflectometer_inst/adc_pulse_num[1]} {reflectometer_inst/adc_pulse_num[2]} {reflectometer_inst/adc_pulse_num[3]} {reflectometer_inst/adc_pulse_num[4]} {reflectometer_inst/adc_pulse_num[5]} {reflectometer_inst/adc_pulse_num[6]} {reflectometer_inst/adc_pulse_num[7]} {reflectometer_inst/adc_pulse_num[8]} {reflectometer_inst/adc_pulse_num[9]} {reflectometer_inst/adc_pulse_num[10]} {reflectometer_inst/adc_pulse_num[11]} {reflectometer_inst/adc_pulse_num[12]} {reflectometer_inst/adc_pulse_num[13]} {reflectometer_inst/adc_pulse_num[14]} {reflectometer_inst/adc_pulse_num[15]}]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe7]
+set_property port_width 32 [get_debug_ports u_ila_0/probe7]
+connect_debug_port u_ila_0/probe7 [get_nets [list {reflectometer_inst/adc_pulse_period[0]} {reflectometer_inst/adc_pulse_period[1]} {reflectometer_inst/adc_pulse_period[2]} {reflectometer_inst/adc_pulse_period[3]} {reflectometer_inst/adc_pulse_period[4]} {reflectometer_inst/adc_pulse_period[5]} {reflectometer_inst/adc_pulse_period[6]} {reflectometer_inst/adc_pulse_period[7]} {reflectometer_inst/adc_pulse_period[8]} {reflectometer_inst/adc_pulse_period[9]} {reflectometer_inst/adc_pulse_period[10]} {reflectometer_inst/adc_pulse_period[11]} {reflectometer_inst/adc_pulse_period[12]} {reflectometer_inst/adc_pulse_period[13]} {reflectometer_inst/adc_pulse_period[14]} {reflectometer_inst/adc_pulse_period[15]} {reflectometer_inst/adc_pulse_period[16]} {reflectometer_inst/adc_pulse_period[17]} {reflectometer_inst/adc_pulse_period[18]} {reflectometer_inst/adc_pulse_period[19]} {reflectometer_inst/adc_pulse_period[20]} {reflectometer_inst/adc_pulse_period[21]} {reflectometer_inst/adc_pulse_period[22]} {reflectometer_inst/adc_pulse_period[23]} {reflectometer_inst/adc_pulse_period[24]} {reflectometer_inst/adc_pulse_period[25]} {reflectometer_inst/adc_pulse_period[26]} {reflectometer_inst/adc_pulse_period[27]} {reflectometer_inst/adc_pulse_period[28]} {reflectometer_inst/adc_pulse_period[29]} {reflectometer_inst/adc_pulse_period[30]} {reflectometer_inst/adc_pulse_period[31]}]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe8]
+set_property port_width 12 [get_debug_ports u_ila_0/probe8]
+connect_debug_port u_ila_0/probe8 [get_nets [list {ch2_data_IBUF[0]} {ch2_data_IBUF[1]} {ch2_data_IBUF[2]} {ch2_data_IBUF[3]} {ch2_data_IBUF[4]} {ch2_data_IBUF[5]} {ch2_data_IBUF[6]} {ch2_data_IBUF[7]} {ch2_data_IBUF[8]} {ch2_data_IBUF[9]} {ch2_data_IBUF[10]} {ch2_data_IBUF[11]}]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe9]
+set_property port_width 1 [get_debug_ports u_ila_0/probe9]
+connect_debug_port u_ila_0/probe9 [get_nets [list reflectometer_inst/acum_m_axis_tvalid]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe10]
+set_property port_width 1 [get_debug_ports u_ila_0/probe10]
+connect_debug_port u_ila_0/probe10 [get_nets [list reflectometer_inst/adc_rst]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe11]
+set_property port_width 1 [get_debug_ports u_ila_0/probe11]
+connect_debug_port u_ila_0/probe11 [get_nets [list reflectometer_inst/adc_start]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe12]
+set_property port_width 1 [get_debug_ports u_ila_0/probe12]
+connect_debug_port u_ila_0/probe12 [get_nets [list reflectometer_inst/sampler_dut/buffer_ready]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe13]
+set_property port_width 1 [get_debug_ports u_ila_0/probe13]
+connect_debug_port u_ila_0/probe13 [get_nets [list reflectometer_inst/sampler_dut/enable]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe14]
+set_property port_width 1 [get_debug_ports u_ila_0/probe14]
+connect_debug_port u_ila_0/probe14 [get_nets [list reflectometer_inst/finish]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe15]
+set_property port_width 1 [get_debug_ports u_ila_0/probe15]
+connect_debug_port u_ila_0/probe15 [get_nets [list reflectometer_inst/sampler_dut/out_of_range_reg]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe16]
+set_property port_width 1 [get_debug_ports u_ila_0/probe16]
+connect_debug_port u_ila_0/probe16 [get_nets [list reflectometer_inst/sample_req]]
+create_debug_core u_ila_1 ila
+set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_1]
+set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_1]
+set_property C_ADV_TRIGGER false [get_debug_cores u_ila_1]
+set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_1]
+set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_1]
+set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_1]
+set_property C_TRIGIN_EN false [get_debug_cores u_ila_1]
+set_property C_TRIGOUT_EN false [get_debug_cores u_ila_1]
+set_property port_width 1 [get_debug_ports u_ila_1/clk]
+connect_debug_port u_ila_1/clk [get_nets [list reflectometer_inst/clk_wiz_ctrl_inst/inst/clk_out1]]
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe0]
+set_property port_width 32 [get_debug_ports u_ila_1/probe0]
+connect_debug_port u_ila_1/probe0 [get_nets [list {reflectometer_inst/generator_inst/cnt_period[0]} {reflectometer_inst/generator_inst/cnt_period[1]} {reflectometer_inst/generator_inst/cnt_period[2]} {reflectometer_inst/generator_inst/cnt_period[3]} {reflectometer_inst/generator_inst/cnt_period[4]} {reflectometer_inst/generator_inst/cnt_period[5]} {reflectometer_inst/generator_inst/cnt_period[6]} {reflectometer_inst/generator_inst/cnt_period[7]} {reflectometer_inst/generator_inst/cnt_period[8]} {reflectometer_inst/generator_inst/cnt_period[9]} {reflectometer_inst/generator_inst/cnt_period[10]} {reflectometer_inst/generator_inst/cnt_period[11]} {reflectometer_inst/generator_inst/cnt_period[12]} {reflectometer_inst/generator_inst/cnt_period[13]} {reflectometer_inst/generator_inst/cnt_period[14]} {reflectometer_inst/generator_inst/cnt_period[15]} {reflectometer_inst/generator_inst/cnt_period[16]} {reflectometer_inst/generator_inst/cnt_period[17]} {reflectometer_inst/generator_inst/cnt_period[18]} {reflectometer_inst/generator_inst/cnt_period[19]} {reflectometer_inst/generator_inst/cnt_period[20]} {reflectometer_inst/generator_inst/cnt_period[21]} {reflectometer_inst/generator_inst/cnt_period[22]} {reflectometer_inst/generator_inst/cnt_period[23]} {reflectometer_inst/generator_inst/cnt_period[24]} {reflectometer_inst/generator_inst/cnt_period[25]} {reflectometer_inst/generator_inst/cnt_period[26]} {reflectometer_inst/generator_inst/cnt_period[27]} {reflectometer_inst/generator_inst/cnt_period[28]} {reflectometer_inst/generator_inst/cnt_period[29]} {reflectometer_inst/generator_inst/cnt_period[30]} {reflectometer_inst/generator_inst/cnt_period[31]}]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe1]
+set_property port_width 16 [get_debug_ports u_ila_1/probe1]
+connect_debug_port u_ila_1/probe1 [get_nets [list {reflectometer_inst/generator_inst/cnt_pulse_num[0]} {reflectometer_inst/generator_inst/cnt_pulse_num[1]} {reflectometer_inst/generator_inst/cnt_pulse_num[2]} {reflectometer_inst/generator_inst/cnt_pulse_num[3]} {reflectometer_inst/generator_inst/cnt_pulse_num[4]} {reflectometer_inst/generator_inst/cnt_pulse_num[5]} {reflectometer_inst/generator_inst/cnt_pulse_num[6]} {reflectometer_inst/generator_inst/cnt_pulse_num[7]} {reflectometer_inst/generator_inst/cnt_pulse_num[8]} {reflectometer_inst/generator_inst/cnt_pulse_num[9]} {reflectometer_inst/generator_inst/cnt_pulse_num[10]} {reflectometer_inst/generator_inst/cnt_pulse_num[11]} {reflectometer_inst/generator_inst/cnt_pulse_num[12]} {reflectometer_inst/generator_inst/cnt_pulse_num[13]} {reflectometer_inst/generator_inst/cnt_pulse_num[14]} {reflectometer_inst/generator_inst/cnt_pulse_num[15]}]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe2]
+set_property port_width 14 [get_debug_ports u_ila_1/probe2]
+connect_debug_port u_ila_1/probe2 [get_nets [list {reflectometer_inst/dac_pulse_height[0]} {reflectometer_inst/dac_pulse_height[1]} {reflectometer_inst/dac_pulse_height[2]} {reflectometer_inst/dac_pulse_height[3]} {reflectometer_inst/dac_pulse_height[4]} {reflectometer_inst/dac_pulse_height[5]} {reflectometer_inst/dac_pulse_height[6]} {reflectometer_inst/dac_pulse_height[7]} {reflectometer_inst/dac_pulse_height[8]} {reflectometer_inst/dac_pulse_height[9]} {reflectometer_inst/dac_pulse_height[10]} {reflectometer_inst/dac_pulse_height[11]} {reflectometer_inst/dac_pulse_height[12]} {reflectometer_inst/dac_pulse_height[13]}]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe3]
+set_property port_width 32 [get_debug_ports u_ila_1/probe3]
+connect_debug_port u_ila_1/probe3 [get_nets [list {reflectometer_inst/dac_pulse_width[0]} {reflectometer_inst/dac_pulse_width[1]} {reflectometer_inst/dac_pulse_width[2]} {reflectometer_inst/dac_pulse_width[3]} {reflectometer_inst/dac_pulse_width[4]} {reflectometer_inst/dac_pulse_width[5]} {reflectometer_inst/dac_pulse_width[6]} {reflectometer_inst/dac_pulse_width[7]} {reflectometer_inst/dac_pulse_width[8]} {reflectometer_inst/dac_pulse_width[9]} {reflectometer_inst/dac_pulse_width[10]} {reflectometer_inst/dac_pulse_width[11]} {reflectometer_inst/dac_pulse_width[12]} {reflectometer_inst/dac_pulse_width[13]} {reflectometer_inst/dac_pulse_width[14]} {reflectometer_inst/dac_pulse_width[15]} {reflectometer_inst/dac_pulse_width[16]} {reflectometer_inst/dac_pulse_width[17]} {reflectometer_inst/dac_pulse_width[18]} {reflectometer_inst/dac_pulse_width[19]} {reflectometer_inst/dac_pulse_width[20]} {reflectometer_inst/dac_pulse_width[21]} {reflectometer_inst/dac_pulse_width[22]} {reflectometer_inst/dac_pulse_width[23]} {reflectometer_inst/dac_pulse_width[24]} {reflectometer_inst/dac_pulse_width[25]} {reflectometer_inst/dac_pulse_width[26]} {reflectometer_inst/dac_pulse_width[27]} {reflectometer_inst/dac_pulse_width[28]} {reflectometer_inst/dac_pulse_width[29]} {reflectometer_inst/dac_pulse_width[30]} {reflectometer_inst/dac_pulse_width[31]}]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe4]
+set_property port_width 16 [get_debug_ports u_ila_1/probe4]
+connect_debug_port u_ila_1/probe4 [get_nets [list {reflectometer_inst/dac_pulse_num[0]} {reflectometer_inst/dac_pulse_num[1]} {reflectometer_inst/dac_pulse_num[2]} {reflectometer_inst/dac_pulse_num[3]} {reflectometer_inst/dac_pulse_num[4]} {reflectometer_inst/dac_pulse_num[5]} {reflectometer_inst/dac_pulse_num[6]} {reflectometer_inst/dac_pulse_num[7]} {reflectometer_inst/dac_pulse_num[8]} {reflectometer_inst/dac_pulse_num[9]} {reflectometer_inst/dac_pulse_num[10]} {reflectometer_inst/dac_pulse_num[11]} {reflectometer_inst/dac_pulse_num[12]} {reflectometer_inst/dac_pulse_num[13]} {reflectometer_inst/dac_pulse_num[14]} {reflectometer_inst/dac_pulse_num[15]}]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe5]
+set_property port_width 32 [get_debug_ports u_ila_1/probe5]
+connect_debug_port u_ila_1/probe5 [get_nets [list {reflectometer_inst/dac_pulse_period[0]} {reflectometer_inst/dac_pulse_period[1]} {reflectometer_inst/dac_pulse_period[2]} {reflectometer_inst/dac_pulse_period[3]} {reflectometer_inst/dac_pulse_period[4]} {reflectometer_inst/dac_pulse_period[5]} {reflectometer_inst/dac_pulse_period[6]} {reflectometer_inst/dac_pulse_period[7]} {reflectometer_inst/dac_pulse_period[8]} {reflectometer_inst/dac_pulse_period[9]} {reflectometer_inst/dac_pulse_period[10]} {reflectometer_inst/dac_pulse_period[11]} {reflectometer_inst/dac_pulse_period[12]} {reflectometer_inst/dac_pulse_period[13]} {reflectometer_inst/dac_pulse_period[14]} {reflectometer_inst/dac_pulse_period[15]} {reflectometer_inst/dac_pulse_period[16]} {reflectometer_inst/dac_pulse_period[17]} {reflectometer_inst/dac_pulse_period[18]} {reflectometer_inst/dac_pulse_period[19]} {reflectometer_inst/dac_pulse_period[20]} {reflectometer_inst/dac_pulse_period[21]} {reflectometer_inst/dac_pulse_period[22]} {reflectometer_inst/dac_pulse_period[23]} {reflectometer_inst/dac_pulse_period[24]} {reflectometer_inst/dac_pulse_period[25]} {reflectometer_inst/dac_pulse_period[26]} {reflectometer_inst/dac_pulse_period[27]} {reflectometer_inst/dac_pulse_period[28]} {reflectometer_inst/dac_pulse_period[29]} {reflectometer_inst/dac_pulse_period[30]} {reflectometer_inst/dac_pulse_period[31]}]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe6]
+set_property port_width 14 [get_debug_ports u_ila_1/probe6]
+connect_debug_port u_ila_1/probe6 [get_nets [list {reflectometer_inst/p2_data[0]} {reflectometer_inst/p2_data[1]} {reflectometer_inst/p2_data[2]} {reflectometer_inst/p2_data[3]} {reflectometer_inst/p2_data[4]} {reflectometer_inst/p2_data[5]} {reflectometer_inst/p2_data[6]} {reflectometer_inst/p2_data[7]} {reflectometer_inst/p2_data[8]} {reflectometer_inst/p2_data[9]} {reflectometer_inst/p2_data[10]} {reflectometer_inst/p2_data[11]} {reflectometer_inst/p2_data[12]} {reflectometer_inst/p2_data[13]}]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe7]
+set_property port_width 1 [get_debug_ports u_ila_1/probe7]
+connect_debug_port u_ila_1/probe7 [get_nets [list reflectometer_inst/dac_rst]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe8]
+set_property port_width 1 [get_debug_ports u_ila_1/probe8]
+connect_debug_port u_ila_1/probe8 [get_nets [list reflectometer_inst/dac_start]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe9]
+set_property port_width 1 [get_debug_ports u_ila_1/probe9]
+connect_debug_port u_ila_1/probe9 [get_nets [list reflectometer_inst/generator_inst/enable]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe10]
+set_property port_width 1 [get_debug_ports u_ila_1/probe10]
+connect_debug_port u_ila_1/probe10 [get_nets [list reflectometer_inst/sample_done]]
+create_debug_core u_ila_2 ila
+set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_2]
+set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_2]
+set_property C_ADV_TRIGGER false [get_debug_cores u_ila_2]
+set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_2]
+set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_2]
+set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_2]
+set_property C_TRIGIN_EN false [get_debug_cores u_ila_2]
+set_property C_TRIGOUT_EN false [get_debug_cores u_ila_2]
+set_property port_width 1 [get_debug_ports u_ila_2/clk]
+connect_debug_port u_ila_2/clk [get_nets [list e_gtxc_OBUF_BUFG]]
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe0]
+set_property port_width 8 [get_debug_ports u_ila_2/probe0]
+connect_debug_port u_ila_2/probe0 [get_nets [list {m_axis_rx_tdata[0]} {m_axis_rx_tdata[1]} {m_axis_rx_tdata[2]} {m_axis_rx_tdata[3]} {m_axis_rx_tdata[4]} {m_axis_rx_tdata[5]} {m_axis_rx_tdata[6]} {m_axis_rx_tdata[7]}]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe1]
+set_property port_width 8 [get_debug_ports u_ila_2/probe1]
+connect_debug_port u_ila_2/probe1 [get_nets [list {s_axis_tx_tdata[0]} {s_axis_tx_tdata[1]} {s_axis_tx_tdata[2]} {s_axis_tx_tdata[3]} {s_axis_tx_tdata[4]} {s_axis_tx_tdata[5]} {s_axis_tx_tdata[6]} {s_axis_tx_tdata[7]}]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe2]
+set_property port_width 3 [get_debug_ports u_ila_2/probe2]
+connect_debug_port u_ila_2/probe2 [get_nets [list {reflectometer_inst/accumulator_top_dut/output_async_fifo/rd_state[0]} {reflectometer_inst/accumulator_top_dut/output_async_fifo/rd_state[1]} {reflectometer_inst/accumulator_top_dut/output_async_fifo/rd_state[2]}]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe3]
+set_property port_width 3 [get_debug_ports u_ila_2/probe3]
+connect_debug_port u_ila_2/probe3 [get_nets [list {reflectometer_inst/udp_ctrl_inst/eth_state[0]} {reflectometer_inst/udp_ctrl_inst/eth_state[1]} {reflectometer_inst/udp_ctrl_inst/eth_state[2]}]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe4]
+set_property port_width 1 [get_debug_ports u_ila_2/probe4]
+connect_debug_port u_ila_2/probe4 [get_nets [list reflectometer_inst/udp_ctrl_inst/busy_flag_eth]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe5]
+set_property port_width 1 [get_debug_ports u_ila_2/probe5]
+connect_debug_port u_ila_2/probe5 [get_nets [list m_axis_rx_tlast]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe6]
+set_property port_width 1 [get_debug_ports u_ila_2/probe6]
+connect_debug_port u_ila_2/probe6 [get_nets [list m_axis_rx_tready]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe7]
+set_property port_width 1 [get_debug_ports u_ila_2/probe7]
+connect_debug_port u_ila_2/probe7 [get_nets [list m_axis_rx_tvalid]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe8]
+set_property port_width 1 [get_debug_ports u_ila_2/probe8]
+connect_debug_port u_ila_2/probe8 [get_nets [list req_ready]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe9]
+set_property port_width 1 [get_debug_ports u_ila_2/probe9]
+connect_debug_port u_ila_2/probe9 [get_nets [list s_axis_tx_tlast]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe10]
+set_property port_width 1 [get_debug_ports u_ila_2/probe10]
+connect_debug_port u_ila_2/probe10 [get_nets [list s_axis_tx_tready]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe11]
+set_property port_width 1 [get_debug_ports u_ila_2/probe11]
+connect_debug_port u_ila_2/probe11 [get_nets [list s_axis_tx_tvalid]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe12]
+set_property port_width 1 [get_debug_ports u_ila_2/probe12]
+connect_debug_port u_ila_2/probe12 [get_nets [list send_req]]
+set_property C_CLK_INPUT_FREQ_HZ 300000000 [get_debug_cores dbg_hub]
+set_property C_ENABLE_CLK_DIVIDER false [get_debug_cores dbg_hub]
+set_property C_USER_SCAN_CHAIN 1 [get_debug_cores dbg_hub]
+connect_debug_port dbg_hub/clk [get_nets e_gtxc_OBUF_BUFG]

designs/reflectometer_prototype/ip/clk_wiz_ctrl_inst.xci

@@ -0,0 +1,689 @@
+{
+  "schema": "xilinx.com:schema:json_instance:1.0",
+  "ip_inst": {
+    "xci_name": "clk_wiz_ctrl_inst",
+    "component_reference": "xilinx.com:ip:clk_wiz:6.0",
+    "ip_revision": "16",
+    "gen_directory": "../../../../eth_generator_top.gen/sources_1/ip/clk_wiz_ctrl_inst",
+    "parameters": {
+      "component_parameters": {
+        "Component_Name": [ { "value": "clk_wiz_ctrl_inst", "resolve_type": "user", "usage": "all" } ],
+        "USER_CLK_FREQ0": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "USER_CLK_FREQ1": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "USER_CLK_FREQ2": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "USER_CLK_FREQ3": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "ENABLE_CLOCK_MONITOR": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "OPTIMIZE_CLOCKING_STRUCTURE_EN": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "ENABLE_USER_CLOCK0": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "ENABLE_USER_CLOCK1": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "ENABLE_USER_CLOCK2": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "ENABLE_USER_CLOCK3": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "Enable_PLL0": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "Enable_PLL1": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "REF_CLK_FREQ": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PRECISION": [ { "value": "1", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PRIMITIVE": [ { "value": "MMCM", "resolve_type": "user", "usage": "all" } ],
+        "PRIMTYPE_SEL": [ { "value": "mmcm_adv", "resolve_type": "user", "usage": "all" } ],
+        "CLOCK_MGR_TYPE": [ { "value": "auto", "resolve_type": "user", "usage": "all" } ],
+        "USE_FREQ_SYNTH": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_SPREAD_SPECTRUM": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_PHASE_ALIGNMENT": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_MIN_POWER": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_DYN_PHASE_SHIFT": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_DYN_RECONFIG": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "JITTER_SEL": [ { "value": "No_Jitter", "resolve_type": "user", "usage": "all" } ],
+        "PRIM_IN_FREQ": [ { "value": "200.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PRIM_IN_TIMEPERIOD": [ { "value": "10.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "IN_FREQ_UNITS": [ { "value": "Units_MHz", "resolve_type": "user", "usage": "all" } ],
+        "PHASESHIFT_MODE": [ { "value": "WAVEFORM", "resolve_type": "user", "usage": "all" } ],
+        "IN_JITTER_UNITS": [ { "value": "Units_UI", "resolve_type": "user", "usage": "all" } ],
+        "RELATIVE_INCLK": [ { "value": "REL_PRIMARY", "resolve_type": "user", "usage": "all" } ],
+        "USE_INCLK_SWITCHOVER": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "SECONDARY_IN_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "SECONDARY_IN_TIMEPERIOD": [ { "value": "10.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "SECONDARY_PORT": [ { "value": "clk_in2", "resolve_type": "user", "usage": "all" } ],
+        "SECONDARY_SOURCE": [ { "value": "Single_ended_clock_capable_pin", "resolve_type": "user", "usage": "all" } ],
+        "JITTER_OPTIONS": [ { "value": "UI", "resolve_type": "user", "usage": "all" } ],
+        "CLKIN1_UI_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKIN2_UI_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PRIM_IN_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "SECONDARY_IN_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKIN1_JITTER_PS": [ { "value": "50.0", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKIN2_JITTER_PS": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT1_USED": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT2_USED": [ { "value": "true", "value_src": "user", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT3_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT4_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT5_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT6_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT7_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "NUM_OUT_CLKS": [ { "value": "2", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "CLK_OUT1_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLK_OUT2_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLK_OUT3_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLK_OUT4_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLK_OUT5_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLK_OUT6_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLK_OUT7_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "PRIMARY_PORT": [ { "value": "clk_in1", "resolve_type": "user", "usage": "all" } ],
+        "CLK_OUT1_PORT": [ { "value": "clk_out1", "resolve_type": "user", "usage": "all" } ],
+        "CLK_OUT2_PORT": [ { "value": "clk_out2", "resolve_type": "user", "usage": "all" } ],
+        "CLK_OUT3_PORT": [ { "value": "clk_out3", "resolve_type": "user", "usage": "all" } ],
+        "CLK_OUT4_PORT": [ { "value": "clk_out4", "resolve_type": "user", "usage": "all" } ],
+        "CLK_OUT5_PORT": [ { "value": "clk_out5", "resolve_type": "user", "usage": "all" } ],
+        "CLK_OUT6_PORT": [ { "value": "clk_out6", "resolve_type": "user", "usage": "all" } ],
+        "CLK_OUT7_PORT": [ { "value": "clk_out7", "resolve_type": "user", "usage": "all" } ],
+        "DADDR_PORT": [ { "value": "daddr", "resolve_type": "user", "usage": "all" } ],
+        "DCLK_PORT": [ { "value": "dclk", "resolve_type": "user", "usage": "all" } ],
+        "DRDY_PORT": [ { "value": "drdy", "resolve_type": "user", "usage": "all" } ],
+        "DWE_PORT": [ { "value": "dwe", "resolve_type": "user", "usage": "all" } ],
+        "DIN_PORT": [ { "value": "din", "resolve_type": "user", "usage": "all" } ],
+        "DOUT_PORT": [ { "value": "dout", "resolve_type": "user", "usage": "all" } ],
+        "DEN_PORT": [ { "value": "den", "resolve_type": "user", "usage": "all" } ],
+        "PSCLK_PORT": [ { "value": "psclk", "resolve_type": "user", "usage": "all" } ],
+        "PSEN_PORT": [ { "value": "psen", "resolve_type": "user", "usage": "all" } ],
+        "PSINCDEC_PORT": [ { "value": "psincdec", "resolve_type": "user", "usage": "all" } ],
+        "PSDONE_PORT": [ { "value": "psdone", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT1_REQUESTED_OUT_FREQ": [ { "value": "125", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT1_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT1_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT2_REQUESTED_OUT_FREQ": [ { "value": "65.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT2_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT2_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT3_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT3_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT3_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT4_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT4_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT4_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT5_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT5_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT5_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT6_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT6_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT6_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT7_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT7_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT7_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "USE_MAX_I_JITTER": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_MIN_O_JITTER": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT1_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT2_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT3_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT4_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT5_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT6_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT7_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "PRIM_SOURCE": [ { "value": "Single_ended_clock_capable_pin", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT1_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT2_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT3_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT4_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT5_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT6_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT7_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "FEEDBACK_SOURCE": [ { "value": "FDBK_AUTO", "resolve_type": "user", "usage": "all" } ],
+        "CLKFB_IN_SIGNALING": [ { "value": "SINGLE", "resolve_type": "user", "usage": "all" } ],
+        "CLKFB_IN_PORT": [ { "value": "clkfb_in", "resolve_type": "user", "usage": "all" } ],
+        "CLKFB_IN_P_PORT": [ { "value": "clkfb_in_p", "resolve_type": "user", "usage": "all" } ],
+        "CLKFB_IN_N_PORT": [ { "value": "clkfb_in_n", "resolve_type": "user", "usage": "all" } ],
+        "CLKFB_OUT_PORT": [ { "value": "clkfb_out", "resolve_type": "user", "usage": "all" } ],
+        "CLKFB_OUT_P_PORT": [ { "value": "clkfb_out_p", "resolve_type": "user", "usage": "all" } ],
+        "CLKFB_OUT_N_PORT": [ { "value": "clkfb_out_n", "resolve_type": "user", "usage": "all" } ],
+        "PLATFORM": [ { "value": "UNKNOWN", "resolve_type": "user", "usage": "all" } ],
+        "SUMMARY_STRINGS": [ { "value": "empty", "resolve_type": "user", "usage": "all" } ],
+        "USE_LOCKED": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CALC_DONE": [ { "value": "empty", "resolve_type": "user", "usage": "all" } ],
+        "USE_RESET": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_POWER_DOWN": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_STATUS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_FREEZE": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_CLK_VALID": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_INCLK_STOPPED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_CLKFB_STOPPED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "RESET_PORT": [ { "value": "reset", "resolve_type": "user", "usage": "all" } ],
+        "LOCKED_PORT": [ { "value": "locked", "resolve_type": "user", "usage": "all" } ],
+        "POWER_DOWN_PORT": [ { "value": "power_down", "resolve_type": "user", "usage": "all" } ],
+        "CLK_VALID_PORT": [ { "value": "CLK_VALID", "resolve_type": "user", "usage": "all" } ],
+        "STATUS_PORT": [ { "value": "STATUS", "resolve_type": "user", "usage": "all" } ],
+        "CLK_IN_SEL_PORT": [ { "value": "clk_in_sel", "resolve_type": "user", "usage": "all" } ],
+        "INPUT_CLK_STOPPED_PORT": [ { "value": "input_clk_stopped", "resolve_type": "user", "usage": "all" } ],
+        "CLKFB_STOPPED_PORT": [ { "value": "clkfb_stopped", "resolve_type": "user", "usage": "all" } ],
+        "SS_MODE": [ { "value": "CENTER_HIGH", "resolve_type": "user", "usage": "all" } ],
+        "SS_MOD_FREQ": [ { "value": "250", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "SS_MOD_TIME": [ { "value": "0.004", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "OVERRIDE_MMCM": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_NOTES": [ { "value": "None", "resolve_type": "user", "usage": "all" } ],
+        "MMCM_DIVCLK_DIVIDE": [ { "value": "4", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "user", "usage": "all" } ],
+        "MMCM_CLKFBOUT_MULT_F": [ { "value": "16.875", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKFBOUT_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_CLKIN1_PERIOD": [ { "value": "5.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKIN2_PERIOD": [ { "value": "10.0", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT4_CASCADE": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_CLOCK_HOLD": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_COMPENSATION": [ { "value": "ZHOLD", "resolve_type": "user", "usage": "all" } ],
+        "MMCM_REF_JITTER1": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_REF_JITTER2": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_STARTUP_WAIT": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_CLKOUT0_DIVIDE_F": [ { "value": "6.750", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT0_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT0_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_CLKOUT1_DIVIDE": [ { "value": "13", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_CLKOUT1_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT1_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_CLKOUT2_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT2_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_CLKOUT3_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT3_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_CLKOUT4_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT4_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_CLKOUT5_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_CLKOUT5_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT5_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "MMCM_CLKOUT6_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_CLKOUT6_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT6_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT6_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "OVERRIDE_PLL": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "PLL_NOTES": [ { "value": "None", "resolve_type": "user", "usage": "all" } ],
+        "PLL_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "user", "usage": "all" } ],
+        "PLL_CLKFBOUT_MULT": [ { "value": "4", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "PLL_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLK_FEEDBACK": [ { "value": "CLKFBOUT", "resolve_type": "user", "usage": "all" } ],
+        "PLL_DIVCLK_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "PLL_CLKIN_PERIOD": [ { "value": "10.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_COMPENSATION": [ { "value": "SYSTEM_SYNCHRONOUS", "resolve_type": "user", "usage": "all" } ],
+        "PLL_REF_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT0_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "PLL_CLKOUT0_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT1_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "PLL_CLKOUT1_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "PLL_CLKOUT2_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "PLL_CLKOUT3_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "PLL_CLKOUT4_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT5_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "PLL_CLKOUT5_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "PLL_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "RESET_TYPE": [ { "value": "ACTIVE_HIGH", "resolve_type": "user", "usage": "all" } ],
+        "USE_SAFE_CLOCK_STARTUP": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_CLOCK_SEQUENCING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT1_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "CLKOUT2_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "CLKOUT3_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "CLKOUT4_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "CLKOUT5_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "CLKOUT6_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "CLKOUT7_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "USE_BOARD_FLOW": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLK_IN1_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
+        "CLK_IN2_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
+        "DIFF_CLK_IN1_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
+        "DIFF_CLK_IN2_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
+        "AUTO_PRIMITIVE": [ { "value": "MMCM", "resolve_type": "user", "usage": "all" } ],
+        "RESET_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
+        "ENABLE_CDDC": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CDDCDONE_PORT": [ { "value": "cddcdone", "resolve_type": "user", "usage": "all" } ],
+        "CDDCREQ_PORT": [ { "value": "cddcreq", "resolve_type": "user", "usage": "all" } ],
+        "ENABLE_CLKOUTPHY": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUTPHY_REQUESTED_FREQ": [ { "value": "600.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT1_JITTER": [ { "value": "162.582", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT1_PHASE_ERROR": [ { "value": "137.238", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT2_JITTER": [ { "value": "185.296", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT2_PHASE_ERROR": [ { "value": "137.238", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT3_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT3_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT4_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT4_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT5_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT5_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT6_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT6_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT7_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT7_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "INPUT_MODE": [ { "value": "frequency", "resolve_type": "user", "usage": "all" } ],
+        "INTERFACE_SELECTION": [ { "value": "Enable_AXI", "resolve_type": "user", "usage": "all" } ],
+        "AXI_DRP": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "PHASE_DUTY_CONFIG": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ]
+      },
+      "model_parameters": {
+        "C_CLKOUT2_USED": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USER_CLK_FREQ0": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_AUTO_PRIMITIVE": [ { "value": "MMCM", "resolve_type": "generated", "usage": "all" } ],
+        "C_USER_CLK_FREQ1": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_USER_CLK_FREQ2": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_USER_CLK_FREQ3": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_ENABLE_CLOCK_MONITOR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_ENABLE_USER_CLOCK0": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_ENABLE_USER_CLOCK1": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_ENABLE_USER_CLOCK2": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_ENABLE_USER_CLOCK3": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_Enable_PLL0": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_Enable_PLL1": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_REF_CLK_FREQ": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PRECISION": [ { "value": "1", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT3_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT4_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT5_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT6_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT7_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_CLKOUT1_BAR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_CLKOUT2_BAR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_CLKOUT3_BAR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_CLKOUT4_BAR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "c_component_name": [ { "value": "clk_wiz_ctrl_inst", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLATFORM": [ { "value": "UNKNOWN", "resolve_type": "generated", "usage": "all" } ],
+        "C_USE_FREQ_SYNTH": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_PHASE_ALIGNMENT": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PRIM_IN_JITTER": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_SECONDARY_IN_JITTER": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_JITTER_SEL": [ { "value": "No_Jitter", "resolve_type": "generated", "usage": "all" } ],
+        "C_USE_MIN_POWER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_MIN_O_JITTER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_MAX_I_JITTER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_DYN_PHASE_SHIFT": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_OPTIMIZE_CLOCKING_STRUCTURE_EN": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_INCLK_SWITCHOVER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_DYN_RECONFIG": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_SPREAD_SPECTRUM": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_FAST_SIMULATION": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PRIMTYPE_SEL": [ { "value": "AUTO", "resolve_type": "generated", "usage": "all" } ],
+        "C_USE_CLK_VALID": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PRIM_IN_FREQ": [ { "value": "200.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PRIM_IN_TIMEPERIOD": [ { "value": "10.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_IN_FREQ_UNITS": [ { "value": "Units_MHz", "resolve_type": "generated", "usage": "all" } ],
+        "C_SECONDARY_IN_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_SECONDARY_IN_TIMEPERIOD": [ { "value": "10.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_FEEDBACK_SOURCE": [ { "value": "FDBK_AUTO", "resolve_type": "generated", "usage": "all" } ],
+        "C_PRIM_SOURCE": [ { "value": "Single_ended_clock_capable_pin", "resolve_type": "generated", "usage": "all" } ],
+        "C_PHASESHIFT_MODE": [ { "value": "WAVEFORM", "resolve_type": "generated", "usage": "all" } ],
+        "C_SECONDARY_SOURCE": [ { "value": "Single_ended_clock_capable_pin", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFB_IN_SIGNALING": [ { "value": "SINGLE", "resolve_type": "generated", "usage": "all" } ],
+        "C_USE_RESET": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_RESET_LOW": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_LOCKED": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_INCLK_STOPPED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_CLKFB_STOPPED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_POWER_DOWN": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_STATUS": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_FREEZE": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_NUM_OUT_CLKS": [ { "value": "2", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT1_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT2_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT3_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT4_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT5_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT6_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT7_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_INCLK_SUM_ROW0": [ { "value": "Input Clock   Freq (MHz)    Input Jitter (UI)", "resolve_type": "generated", "usage": "all" } ],
+        "C_INCLK_SUM_ROW1": [ { "value": "__primary_________200.000____________0.010", "resolve_type": "generated", "usage": "all" } ],
+        "C_INCLK_SUM_ROW2": [ { "value": "no_secondary_input_clock ", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW0A": [ { "value": " Output     Output      Phase    Duty Cycle   Pk-to-Pk     Phase", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW0B": [ { "value": "  Clock     Freq (MHz)  (degrees)    (%)     Jitter (ps)  Error (ps)", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW1": [ { "value": "clk_out1__125.00000______0.000______50.0______162.582____137.238", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW2": [ { "value": "clk_out2__64.90385______0.000______50.0______185.296____137.238", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW3": [ { "value": "no_CLK_OUT3_output", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW4": [ { "value": "no_CLK_OUT4_output", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW5": [ { "value": "no_CLK_OUT5_output", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW6": [ { "value": "no_CLK_OUT6_output", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW7": [ { "value": "no_CLK_OUT7_output", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT1_REQUESTED_OUT_FREQ": [ { "value": "125", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT2_REQUESTED_OUT_FREQ": [ { "value": "65.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT3_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT4_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT5_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT6_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT7_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT1_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT2_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT3_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT4_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT5_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT6_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT7_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT1_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT2_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT3_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT4_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT5_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT6_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT7_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT1_OUT_FREQ": [ { "value": "125.00000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT2_OUT_FREQ": [ { "value": "64.90385", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT3_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT4_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT5_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT6_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT7_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT6_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT7_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT1_DUTY_CYCLE": [ { "value": "50.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT2_DUTY_CYCLE": [ { "value": "50.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT3_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT4_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT5_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT6_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT7_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_USE_SAFE_CLOCK_STARTUP": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_CLOCK_SEQUENCING": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT1_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT2_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT3_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT4_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT5_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT6_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT7_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_NOTES": [ { "value": "None", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_CLKFBOUT_MULT_F": [ { "value": "16.875", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKIN1_PERIOD": [ { "value": "5.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKIN2_PERIOD": [ { "value": "10.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT4_CASCADE": [ { "value": "FALSE", "resolve_type": "generated", "format": "bool", "usage": "all" } ],
+        "C_MMCM_CLOCK_HOLD": [ { "value": "FALSE", "resolve_type": "generated", "format": "bool", "usage": "all" } ],
+        "C_MMCM_COMPENSATION": [ { "value": "ZHOLD", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_DIVCLK_DIVIDE": [ { "value": "4", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_REF_JITTER1": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_REF_JITTER2": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_STARTUP_WAIT": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_CLKOUT0_DIVIDE_F": [ { "value": "6.750", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT1_DIVIDE": [ { "value": "13", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_CLKOUT5_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_CLKOUT6_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_CLKOUT0_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT1_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT2_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT3_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT4_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT5_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT6_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT6_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKFBOUT_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_CLKOUT0_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_CLKOUT1_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_CLKOUT2_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_CLKOUT3_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_CLKOUT4_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_CLKOUT5_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_CLKOUT6_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLL_NOTES": [ { "value": "No notes", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLL_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLL_CLK_FEEDBACK": [ { "value": "CLKFBOUT", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLL_CLKFBOUT_MULT": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PLL_CLKIN_PERIOD": [ { "value": "1.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_COMPENSATION": [ { "value": "SYSTEM_SYNCHRONOUS", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLL_DIVCLK_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PLL_REF_JITTER": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT0_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PLL_CLKOUT1_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PLL_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PLL_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PLL_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PLL_CLKOUT5_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PLL_CLKOUT0_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT1_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT2_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT3_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT4_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT5_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PLL_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLOCK_MGR_TYPE": [ { "value": "NA", "resolve_type": "generated", "usage": "all" } ],
+        "C_OVERRIDE_MMCM": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_OVERRIDE_PLL": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_PRIMARY_PORT": [ { "value": "clk_in1", "resolve_type": "generated", "usage": "all" } ],
+        "C_SECONDARY_PORT": [ { "value": "clk_in2", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_OUT1_PORT": [ { "value": "clk_out1", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_OUT2_PORT": [ { "value": "clk_out2", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_OUT3_PORT": [ { "value": "clk_out3", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_OUT4_PORT": [ { "value": "clk_out4", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_OUT5_PORT": [ { "value": "clk_out5", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_OUT6_PORT": [ { "value": "clk_out6", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_OUT7_PORT": [ { "value": "clk_out7", "resolve_type": "generated", "usage": "all" } ],
+        "C_RESET_PORT": [ { "value": "reset", "resolve_type": "generated", "usage": "all" } ],
+        "C_LOCKED_PORT": [ { "value": "locked", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFB_IN_PORT": [ { "value": "clkfb_in", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFB_IN_P_PORT": [ { "value": "clkfb_in_p", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFB_IN_N_PORT": [ { "value": "clkfb_in_n", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFB_OUT_PORT": [ { "value": "clkfb_out", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFB_OUT_P_PORT": [ { "value": "clkfb_out_p", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFB_OUT_N_PORT": [ { "value": "clkfb_out_n", "resolve_type": "generated", "usage": "all" } ],
+        "C_POWER_DOWN_PORT": [ { "value": "power_down", "resolve_type": "generated", "usage": "all" } ],
+        "C_DADDR_PORT": [ { "value": "daddr", "resolve_type": "generated", "usage": "all" } ],
+        "C_DCLK_PORT": [ { "value": "dclk", "resolve_type": "generated", "usage": "all" } ],
+        "C_DRDY_PORT": [ { "value": "drdy", "resolve_type": "generated", "usage": "all" } ],
+        "C_DWE_PORT": [ { "value": "dwe", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIN_PORT": [ { "value": "din", "resolve_type": "generated", "usage": "all" } ],
+        "C_DOUT_PORT": [ { "value": "dout", "resolve_type": "generated", "usage": "all" } ],
+        "C_DEN_PORT": [ { "value": "den", "resolve_type": "generated", "usage": "all" } ],
+        "C_PSCLK_PORT": [ { "value": "psclk", "resolve_type": "generated", "usage": "all" } ],
+        "C_PSEN_PORT": [ { "value": "psen", "resolve_type": "generated", "usage": "all" } ],
+        "C_PSINCDEC_PORT": [ { "value": "psincdec", "resolve_type": "generated", "usage": "all" } ],
+        "C_PSDONE_PORT": [ { "value": "psdone", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_VALID_PORT": [ { "value": "CLK_VALID", "resolve_type": "generated", "usage": "all" } ],
+        "C_STATUS_PORT": [ { "value": "STATUS", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_IN_SEL_PORT": [ { "value": "clk_in_sel", "resolve_type": "generated", "usage": "all" } ],
+        "C_INPUT_CLK_STOPPED_PORT": [ { "value": "input_clk_stopped", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFB_STOPPED_PORT": [ { "value": "clkfb_stopped", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKIN1_JITTER_PS": [ { "value": "50.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKIN2_JITTER_PS": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_PRIMITIVE": [ { "value": "MMCM", "resolve_type": "generated", "usage": "all" } ],
+        "C_SS_MODE": [ { "value": "CENTER_HIGH", "resolve_type": "generated", "usage": "all" } ],
+        "C_SS_MOD_PERIOD": [ { "value": "4000", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_SS_MOD_TIME": [ { "value": "0.004", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_HAS_CDDC": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CDDCDONE_PORT": [ { "value": "cddcdone", "resolve_type": "generated", "usage": "all" } ],
+        "C_CDDCREQ_PORT": [ { "value": "cddcreq", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUTPHY_MODE": [ { "value": "VCO", "resolve_type": "generated", "usage": "all" } ],
+        "C_ENABLE_CLKOUTPHY": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_INTERFACE_SELECTION": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_S_AXI_ADDR_WIDTH": [ { "value": "11", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_S_AXI_DATA_WIDTH": [ { "value": "32", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_POWER_REG": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT0_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT0_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT1_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT1_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT2_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT2_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT3_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT3_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT4_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT4_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT5_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT5_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT6_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT6_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFBOUT_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKFBOUT_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVCLK": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_LOCK_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_LOCK_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_LOCK_3": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_FILTER_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_FILTER_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE1_AUTO": [ { "value": "1", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE2_AUTO": [ { "value": "1.9259259259259258", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE3_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE4_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE5_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE6_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE7_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLLBUFGCEDIV": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCMBUFGCEDIV": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLLBUFGCEDIV1": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLLBUFGCEDIV2": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLLBUFGCEDIV3": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_PLLBUFGCEDIV4": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCMBUFGCEDIV1": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCMBUFGCEDIV2": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCMBUFGCEDIV3": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCMBUFGCEDIV4": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCMBUFGCEDIV5": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCMBUFGCEDIV6": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCMBUFGCEDIV7": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT1_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT2_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT3_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT4_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT5_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT6_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT7_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT0_ACTUAL_FREQ": [ { "value": "125.00000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT1_ACTUAL_FREQ": [ { "value": "64.90385", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT2_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT3_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT4_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT5_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT6_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
+        "C_M_MAX": [ { "value": "64.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_M_MIN": [ { "value": "2.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_D_MAX": [ { "value": "80.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_D_MIN": [ { "value": "1.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_O_MAX": [ { "value": "128.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_O_MIN": [ { "value": "1.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_VCO_MIN": [ { "value": "600.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_VCO_MAX": [ { "value": "1200.000", "resolve_type": "generated", "format": "float", "usage": "all" } ]
+      },
+      "project_parameters": {
+        "ARCHITECTURE": [ { "value": "artix7" } ],
+        "BASE_BOARD_PART": [ { "value": "" } ],
+        "BOARD_CONNECTIONS": [ { "value": "" } ],
+        "DEVICE": [ { "value": "xc7a35t" } ],
+        "PACKAGE": [ { "value": "fgg484" } ],
+        "PREFHDL": [ { "value": "VERILOG" } ],
+        "SILICON_REVISION": [ { "value": "" } ],
+        "SIMULATOR_LANGUAGE": [ { "value": "MIXED" } ],
+        "SPEEDGRADE": [ { "value": "-1" } ],
+        "STATIC_POWER": [ { "value": "" } ],
+        "TEMPERATURE_GRADE": [ { "value": "" } ]
+      },
+      "runtime_parameters": {
+        "IPCONTEXT": [ { "value": "IP_Flow" } ],
+        "IPREVISION": [ { "value": "16" } ],
+        "MANAGED": [ { "value": "TRUE" } ],
+        "OUTPUTDIR": [ { "value": "../../../../eth_generator_top.gen/sources_1/ip/clk_wiz_ctrl_inst" } ],
+        "SELECTEDSIMMODEL": [ { "value": "" } ],
+        "SHAREDDIR": [ { "value": "." } ],
+        "SWVERSION": [ { "value": "2025.1" } ],
+        "SYNTHESISFLOW": [ { "value": "OUT_OF_CONTEXT" } ]
+      }
+    },
+    "boundary": {
+      "ports": {
+        "reset": [ { "direction": "in", "driver_value": "0" } ],
+        "clk_in1": [ { "direction": "in" } ],
+        "clk_out1": [ { "direction": "out" } ],
+        "clk_out2": [ { "direction": "out" } ],
+        "locked": [ { "direction": "out" } ]
+      },
+      "interfaces": {
+        "reset": {
+          "vlnv": "xilinx.com:signal:reset:1.0",
+          "abstraction_type": "xilinx.com:signal:reset_rtl:1.0",
+          "mode": "slave",
+          "parameters": {
+            "POLARITY": [ { "value": "ACTIVE_HIGH", "value_src": "constant", "usage": "all" } ],
+            "BOARD.ASSOCIATED_PARAM": [ { "value": "RESET_BOARD_INTERFACE", "value_src": "constant", "usage": "all" } ],
+            "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
+          },
+          "port_maps": {
+            "RST": [ { "physical_name": "reset" } ]
+          }
+        },
+        "clock_CLK_IN1": {
+          "vlnv": "xilinx.com:signal:clock:1.0",
+          "abstraction_type": "xilinx.com:signal:clock_rtl:1.0",
+          "mode": "slave",
+          "parameters": {
+            "FREQ_HZ": [ { "value": "100000000", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
+            "FREQ_TOLERANCE_HZ": [ { "value": "0", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
+            "PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
+            "CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_BUSIF": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_PORT": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_RESET": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ],
+            "BOARD.ASSOCIATED_PARAM": [ { "value": "CLK_IN1_BOARD_INTERFACE", "usage": "all", "is_static_object": false } ]
+          },
+          "port_maps": {
+            "CLK_IN1": [ { "physical_name": "clk_in1" } ]
+          }
+        },
+        "clock_CLK_OUT1": {
+          "vlnv": "xilinx.com:signal:clock:1.0",
+          "abstraction_type": "xilinx.com:signal:clock_rtl:1.0",
+          "mode": "master",
+          "parameters": {
+            "FREQ_HZ": [ { "value": "100000000", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
+            "FREQ_TOLERANCE_HZ": [ { "value": "0", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
+            "PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
+            "CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_BUSIF": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_PORT": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_RESET": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
+          },
+          "port_maps": {
+            "CLK_OUT1": [ { "physical_name": "clk_out1" } ]
+          }
+        },
+        "clock_CLK_OUT2": {
+          "vlnv": "xilinx.com:signal:clock:1.0",
+          "abstraction_type": "xilinx.com:signal:clock_rtl:1.0",
+          "mode": "master",
+          "parameters": {
+            "FREQ_HZ": [ { "value": "100000000", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
+            "FREQ_TOLERANCE_HZ": [ { "value": "0", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
+            "PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
+            "CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_BUSIF": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_PORT": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_RESET": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
+          },
+          "port_maps": {
+            "CLK_OUT2": [ { "physical_name": "clk_out2" } ]
+          }
+        }
+      }
+    }
+  }
+}

designs/reflectometer_prototype/prototype.sv

@@ -0,0 +1,174 @@
+`timescale 1 ns / 1 ns
+
+module prototype_top #(
+    parameter int unsigned DAC_DATA_WIDTH = 14,
+    parameter int unsigned ADC_DATA_WIDTH = 12,
+    parameter PACK_FACTOR = 1,
+    parameter PROCESS_MODE = 0,
+    parameter ZERO_LEVEL = 8192,
+    parameter ACCUM_WIDTH = 32,
+    parameter N_MAX = 4096,
+    parameter WINDOW_SIZE = 65,
+    parameter PACKET_SIZE = 1024
+)(
+    input                  sys_clk_p,                    // system clock positive
+    input                  sys_clk_n,                    // system clock negative 
+    input                   rst_n,                       // reset ,low active
+    output [3:0]            led,                         // display network rate status
+    output                  e_reset,                     // phy reset
+    output                  e_mdc,                       // phy emdio clock
+    inout                   e_mdio,                      // phy emdio data
+    input	                e_rxc,                       // 125Mhz ethernet gmii rx clock
+    input                   e_rxdv,                      // GMII recieving data valid
+    input                   e_rxer,                      // GMII recieving data error                    
+    input [7:0]             e_rxd,                       // GMII recieving data          
+
+    input                   e_txc,                       // 25Mhz ethernet mii tx clock         
+    output                  e_gtxc,                      // 125Mhz ethernet gmii tx clock  
+    output                  e_txen,                      // GMII sending data valid    
+    output                  e_txer,                      // GMII sending data error                   
+    output[7:0]             e_txd,                       // GMII sending data
+
+    // analog
+    output                      da2_clk,
+    output                      da2_wrt,
+    output [DAC_DATA_WIDTH-1:0] da2_data,
+
+    output                      ch2_clk,
+    input                       ch2_otr,
+    input [ADC_DATA_WIDTH-1:0]  ch2_data
+    );
+
+    wire                    sys_clk;                     //single end clock 
+    wire  [31:0]            pack_total_len ;             //package length
+    wire [1:0]              speed      ;                 //net speed select
+    wire                    link       ;                 //link status
+    wire                    erxdv    ;
+    wire [7:0]              erxd      ;
+    wire                    e_tx_en    ;
+    wire [7:0]              etxd      ;
+    wire                    e_rst_n    ;
+    assign e_gtxc = e_rxc;	 
+    assign e_reset = 1'b1; 
+
+    // generate single end clock
+
+    IBUFDS sys_clk_ibufgds
+    (
+    .O                      (sys_clk                 ),
+    .I                      (sys_clk_p               ),
+    .IB                     (sys_clk_n               )
+    );
+
+
+    // Different conversion of GMII data according to different network speeds
+    gmii_arbi arbi_inst
+    (
+    .clk                    (e_gtxc                 ),
+    .rst_n                  (rst_n                  ),
+    .speed                  (2'b10                  ),  
+    .link                   (1'b1                   ), 
+    .pack_total_len         (pack_total_len         ), 
+    .e_rst_n                (e_rst_n                ),
+    .gmii_rx_dv             (e_rxdv                 ),
+    .gmii_rxd               (e_rxd                  ),
+    .gmii_tx_en             (e_tx_en                ),
+    .gmii_txd               (etxd                   ), 
+    .e_rx_dv                (erxdv                  ),
+    .e_rxd                  (erxd                   ),
+    .e_tx_en                (e_txen                 ),
+    .e_txd                  (e_txd                  ) 
+    );
+
+    // ------------------------------------------------------------
+    // axis_mac interface
+    // ------------------------------------------------------------
+    wire         req_ready;
+
+    wire         send_req;
+
+    wire  [7:0]  s_axis_tx_tdata;
+    wire         s_axis_tx_tvalid;
+    wire         s_axis_tx_tready;
+    wire         s_axis_tx_tlast;
+
+    wire [7:0]   m_axis_rx_tdata;
+    wire         m_axis_rx_tvalid;
+    wire         m_axis_rx_tready;
+    wire         m_axis_rx_tlast;
+
+    // ------------------------------------------------------------
+    // axis_mac
+    // ------------------------------------------------------------
+    axis_mac axis_mac0
+    (
+        .gmii_tx_clk       (e_gtxc),
+        .gmii_rx_clk       (e_rxc),
+        .rst_n             (e_rst_n),
+
+        .gmii_rx_dv        (erxdv),
+        .gmii_rxd          (erxd),
+        .gmii_tx_en        (e_tx_en),
+        .gmii_txd          (etxd),
+
+        .send_req          (send_req),
+        .data_length       (PACKET_SIZE),
+        .req_ready         (req_ready),
+
+        .s_axis_tx_tdata   (s_axis_tx_tdata),
+        .s_axis_tx_tvalid  (s_axis_tx_tvalid),
+        .s_axis_tx_tready  (s_axis_tx_tready),
+        .s_axis_tx_tlast   (s_axis_tx_tlast),
+
+        .m_axis_rx_tdata   (m_axis_rx_tdata),
+        .m_axis_rx_tvalid  (m_axis_rx_tvalid),
+        .m_axis_rx_tready  (m_axis_rx_tready),
+        .m_axis_rx_tlast   (m_axis_rx_tlast)
+    );
+
+    // reflectometer base module
+    reflectometer_top #(
+        .PROCESS_MODE(PROCESS_MODE),
+        .PACK_FACTOR(PACK_FACTOR),
+        .ACCUM_WIDTH(ACCUM_WIDTH),
+        .N_MAX(N_MAX),
+        .ZERO_LEVEL(ZERO_LEVEL),
+        .WINDOW_SIZE(WINDOW_SIZE),
+        .PACKET_SIZE(PACKET_SIZE),
+        .ADC_DATA_WIDTH(ADC_DATA_WIDTH),
+        .DAC_DATA_WIDTH(DAC_DATA_WIDTH)
+    ) reflectometer_inst (
+    .sys_clk (sys_clk),
+    .rst_n (rst_n),
+
+    .led(led),
+
+    .gmii_tx_clk       (e_gtxc),
+    .gmii_rx_clk       (e_rxc),
+
+    .s_axis_tx_tdata   (s_axis_tx_tdata),
+    .s_axis_tx_tvalid  (s_axis_tx_tvalid),
+    .s_axis_tx_tready  (s_axis_tx_tready),
+    .s_axis_tx_tlast   (s_axis_tx_tlast),
+
+    .m_axis_rx_tdata   (m_axis_rx_tdata),
+    .m_axis_rx_tvalid  (m_axis_rx_tvalid),
+    .m_axis_rx_tready  (m_axis_rx_tready),
+    .m_axis_rx_tlast   (m_axis_rx_tlast),
+
+    // axis_mac
+    .req_ready(req_ready),
+    .send_req(send_req),
+
+    // DAC
+    .p2_clk(da2_clk),
+    .p2_data(da2_data),
+    .p2_wrt(da2_wrt),
+
+    // ADC
+    .ch2_clk(ch2_clk),
+    .ch2_data(ch2_data),
+    .ch2_otr(ch2_otr)
+    );
+
+endmodule

docs/sampler.md

@@ -1 +0,0 @@
-# Блок Sampler

rtl/accum/README.md

@@ -0,0 +1,39 @@
+# Аккумулятор
+Модуль аккумуляции данных для последующего усреднения. Принимает данные с входного потока АХI-Stream фиксированной ширины (задается параметрически), суммируя их сначала по окнам, а затем со значениями из предыдущей последовательности.
+
+## Список парамтеров:
+- DATA_WIDTH - ширина входных данных, получаемых с АЦП
+- ACCUM_WIDTH - размер данных для аккумуляции, должен быть степенью числа 2. По умолчанию - 32
+- N_MAX - максимальное число окон в последовательности. Должно быть степенью числа 2. Влияет на размер используемой памяти.
+- WINDOW_SIZE - размер окна усреднения
+- PACKET_SIZE - размер выходного пакета
+
+## Иерархия:
+```
+├── accum_top - полная сборка аккумулятора
+│   ├── accum - основная логика аккумуляции по окнам и последовательностям
+│   │   ├── adder - модуль сложения по окнам
+│   ├── out_axis_fifo - модуль для выдачи данных наружу в другом частотном домене
+```
+## Список входных портов:
+- clk_in - частота входных данных
+- rst - сброс всего
+- [DATA_WIDTH-1:0] s_axis_tdata - входные данные
+- s_axis_tvalid - валидность входных данных
+- start - начало аккумуляции
+- [31:0] smp_num - число сэмплов (должно быть кратно WINDOW_SIZE)
+- [15:0] seq_num - число последовательностей аккумуляции
+- eth_clk_in - частота для выходных данных на ethernet
+- req_ready - готовность отправителя начать принимать данные
+- m_axis_tready - готовность выходного axis
+
+
+## Список выходных портов:
+- send_req - сигнал начала отправки данных
+- [7:0] m_axis_tdata - данные выходного axis
+- m_axis_tvalid - валидность выходного axis
+- m_axis_tlast - последний пакет в axis
+- finish - конец отправки всех данных, полный цикл работы завершен
+
+## Логика работы:
+Модуль начинает работу при получении сигнала start. Сразу после начала работы можно подавать данные на входной axis, они будут суммироваться по WINDOW_SIZE штук и отправляться на хранение. Так будет сделано для последовательности длиной smp_num чисел, затем начинается новая последовательность - всего таких будет seq_num штук. Каждая последующая последовательность также суммируется по окнам, а затем полученные значения прибавляются к тем же значениям предыдущей последовательности. Таким образом, выполняется суммирование по двум осям, и из исходных данных seq_num по smp_num чисел остается вектор длиной 1 x (smp_num / WINDOW_SIZE). После накопления всех данных начинается выдача. Выдача осуществляется на выходной AXI stream, работающий в домене eth_clk, и имеющий ширину 8 бит - предполагается, что выдача пойдет на ethernet-udp. Когда поднят сигнал req_ready, модуль будет отправлять send_req (запрос отправки пакета), и по готовности m_axis_tready начнет выдавать пакет размер PACKET_SIZE байт. Если данные нельзя ровно разложить по пакетам, то в последнем пакете могут быть отправлены рандомные данные из памяти. После окончания отправки всех пакетов будет поднят сигнал finish.

rtl/accum/src/accum.sv

@@ -0,0 +1,271 @@
+`timescale 1ns / 1ps
+
+module accumulator
+#(
+    parameter DATA_WIDTH = 12,
+    parameter ACCUM_WIDTH = 32,
+    parameter N_MAX = 4096,
+    parameter WINDOW_SIZE = 4,
+    parameter PACKET_SIZE = 8,
+    parameter READ_BATCH_SIZE =(PACKET_SIZE*8)/(ACCUM_WIDTH)
+    )
+(
+    input clk_in,
+    input rst,
+    input [DATA_WIDTH-1:0] s_axis_tdata,
+    input s_axis_tvalid,
+    input start,
+    input [31:0] smp_num,
+    input [15:0] seq_num,
+
+    output [ACCUM_WIDTH-1:0] out_data,
+    output out_valid,
+    output readout_begin,
+    input batch_req,
+    input finish
+    );
+
+    logic [31:0] smp_num_reg, cnt_smp_num;
+    logic [15:0] seq_num_reg, cnt_seq_num;
+    logic [15:0] cnt_addr, addra, addrb;
+
+    logic [ACCUM_WIDTH-1:0] data;
+    logic valid_data;
+    logic [ACCUM_WIDTH-1:0] data_bram_in, data_bram_out;
+    logic wea, enb;
+
+    logic readout_begin_reg;
+    logic [ACCUM_WIDTH-1:0] out_data_reg;
+    logic out_valid_reg;
+    logic finish_reg, finish_buf;
+
+    // registers for port b data request
+    reg req_data_b;
+    reg [15:0] req_addr_b;
+
+    typedef enum logic [3:0] {
+        IDLE,
+        INIT_MEM,
+        BEGIN_SEQ,
+        REQ_WORD_B,
+        ACCUM,
+        READOUT_START,
+        READOUT_AWAIT,
+        READOUT_DELAY,
+        READOUT_PUT,
+        READOUT_LAST,
+        FINISH
+    } wr_state_t;
+    (* MARK_DEBUG="true" *) wr_state_t wr_state;
+
+    always @(posedge clk_in) begin
+        if (rst) begin
+            smp_num_reg <= '0;
+            cnt_smp_num <= '0;
+            seq_num_reg <= '0;
+            cnt_seq_num <= '0;
+            cnt_addr <= '0;
+            wea <= 0;
+            enb <= 0;
+            wr_state <= IDLE;
+            finish_reg <= 0;
+            out_valid_reg <= 0;
+        end else begin
+            finish_buf <= finish;
+
+            // FSM
+            case(wr_state)
+
+            IDLE: begin
+                // wait for start signal
+                wea <= 0;
+                enb <= 0;
+                readout_begin_reg <= 0;
+                finish_reg <= 0;
+                out_valid_reg <= 0;
+                if (start) begin
+                    smp_num_reg <= smp_num;
+                    seq_num_reg <= seq_num;
+                    wr_state <= INIT_MEM;
+                end
+
+            end
+            INIT_MEM: begin
+                // first run to initialize memory with first batch of values
+                wea <= 0;
+                if (valid_data) begin
+                    data_bram_in <= data;
+                    addra <= cnt_addr;
+                    wea <= 1;
+                    cnt_addr <= cnt_addr + 1;
+                    cnt_smp_num <= cnt_smp_num + WINDOW_SIZE;
+
+                end
+                if (cnt_smp_num >= smp_num_reg) begin
+                    wr_state <= BEGIN_SEQ;
+                end
+
+            end
+            BEGIN_SEQ: begin
+                // start new acc seq
+                wea <= 0;
+                enb <= 0;
+                if (cnt_seq_num == seq_num_reg - 1) begin
+                    cnt_seq_num <= '0;
+                    cnt_smp_num <= '0;
+                    cnt_addr <= '0;
+                    wr_state <= READOUT_START;
+                    addrb <= '0;
+                    enb <= 0;
+                end else begin
+                    // beginning of new data sequence
+                    cnt_seq_num <= cnt_seq_num + 1;
+                    cnt_smp_num <= '0;
+                    cnt_addr <= '0;
+                    wea <= 0;
+                    addrb <= 0;
+                    wr_state <= REQ_WORD_B;
+                end
+            end
+
+            REQ_WORD_B: begin
+                // pre-request data for port b
+                wea <= 0;
+                enb <= 1;
+                addrb <= cnt_addr;
+                wr_state <= ACCUM;
+            end
+
+            ACCUM: begin
+                // sum mem+input
+                enb <= 0;
+                if (valid_data) begin
+                    addra <= cnt_addr;
+                    wea <= 1;
+                    data_bram_in <= data + data_bram_out;
+                    cnt_smp_num <= cnt_smp_num + WINDOW_SIZE;
+                    if (cnt_smp_num + WINDOW_SIZE >= smp_num_reg) begin
+                        wr_state <= BEGIN_SEQ;
+                    end else begin
+                        cnt_addr <= cnt_addr + 1;
+                        wr_state <= REQ_WORD_B;
+                    end
+                end
+            end
+            READOUT_START: begin
+                readout_begin_reg <= 1'b1;
+                wr_state <= READOUT_AWAIT;
+                enb <= 0;
+            end
+
+            READOUT_AWAIT: begin
+                // req await + delay for every-clock readout.
+                if (batch_req) begin
+                    enb <= 1;
+                    wr_state <= READOUT_DELAY;
+                end else if (finish_buf) begin
+                    wr_state <= FINISH;
+                end else begin
+                    enb <= 0;
+                    out_valid_reg <= 0;
+                end
+            end
+
+            READOUT_DELAY: begin
+                // wait for mem latency
+                addrb <= addrb + 1;
+                wr_state <= READOUT_PUT;
+            end
+
+            READOUT_PUT: begin
+                // main data output
+                if ((addrb % READ_BATCH_SIZE) == 0) begin
+                    wr_state <= READOUT_LAST;
+                    enb <= 0;
+                end else addrb <= addrb + 1;
+
+                out_valid_reg <= 1;
+                out_data_reg <= data_bram_out;
+            end
+
+            READOUT_LAST: begin
+                // last word of packet
+                out_valid_reg <= 0;
+                out_data_reg <= data_bram_out;
+                wr_state <= READOUT_START;
+            end
+
+            FINISH: begin
+                out_valid_reg <= 0;
+                enb <= 0;
+                wr_state <= IDLE;
+            end
+
+            default: wr_state <= IDLE;
+            endcase
+        end
+    end
+
+
+    adder
+    #(
+        .DATA_WIDTH(DATA_WIDTH),
+        .WINDOW_SIZE(WINDOW_SIZE),
+        .ACCUM_WIDTH(ACCUM_WIDTH)
+    ) adder_dut
+    (
+        .clk_in(clk_in),
+        .rst(rst),
+        .s_axis_tdata(s_axis_tdata),
+        .s_axis_tvalid(s_axis_tvalid),
+        .sum_data(data),
+        .sum_valid(valid_data)
+    );
+
+    xpm_memory_sdpram #(
+      .ADDR_WIDTH_A(16),               // DECIMAL
+      .ADDR_WIDTH_B(16),               // DECIMAL
+      .AUTO_SLEEP_TIME(0),            // DECIMAL
+      .BYTE_WRITE_WIDTH_A(ACCUM_WIDTH),        // DECIMAL
+      .CASCADE_HEIGHT(0),             // DECIMAL
+      .CLOCKING_MODE("common_clock"), // String
+      .ECC_MODE("no_ecc"),            // String
+      .MEMORY_INIT_FILE("none"),      // String
+      .MEMORY_INIT_PARAM("0"),        // String
+      .MEMORY_OPTIMIZATION("true"),   // String
+      .MEMORY_PRIMITIVE("auto"),      // String
+      .MEMORY_SIZE(N_MAX*ACCUM_WIDTH),             // DECIMAL
+      .MESSAGE_CONTROL(0),            // DECIMAL
+      .READ_DATA_WIDTH_B(ACCUM_WIDTH),         // DECIMAL
+      .READ_LATENCY_B(1),             // DECIMAL
+      .READ_RESET_VALUE_B("0"),       // String
+      .RST_MODE_A("SYNC"),            // String
+      .RST_MODE_B("SYNC"),            // String
+      .SIM_ASSERT_CHK(0),             // DECIMAL; 0=disable simulation messages, 1=enable simulation messages
+      .USE_EMBEDDED_CONSTRAINT(0),    // DECIMAL
+      .USE_MEM_INIT(1),               // DECIMAL
+      .USE_MEM_INIT_MMI(0),           // DECIMAL
+      .WAKEUP_TIME("disable_sleep"),  // String
+      .WRITE_DATA_WIDTH_A(ACCUM_WIDTH),        // DECIMAL
+      .WRITE_MODE_B("no_change"),     // String
+      .WRITE_PROTECT(1)               // DECIMAL
+   )
+   xpm_memory_sdpram_inst (
+
+      .doutb(data_bram_out),
+
+      .addra(addra),
+      .addrb(addrb),
+      .clka(clk_in),
+      .clkb(clk_in),
+      .dina(data_bram_in),
+      .ena(1'b1),
+      .enb(enb),
+      .wea(wea)
+   );
+
+    assign readout_begin = readout_begin_reg;
+    assign out_data = out_data_reg;
+    assign out_valid = out_valid_reg;
+
+endmodule

rtl/accum/src/accum_top.sv

@@ -0,0 +1,92 @@
+`timescale 1ns / 1ps
+
+module accumulator_top
+#(
+    parameter DATA_WIDTH = 12,
+    parameter ACCUM_WIDTH = 32,
+    parameter N_MAX = 4096,
+    parameter WINDOW_SIZE = 65,
+    parameter PACKET_SIZE = 1024,
+    parameter READ_BATCH_SIZE =(PACKET_SIZE*8)/(ACCUM_WIDTH)
+    )
+(
+    // main clk
+    input clk_in,
+    input rst,
+    
+    // input data
+    input [DATA_WIDTH-1:0] s_axis_tdata,
+    input s_axis_tvalid,
+
+    // parameters
+    input start,
+    input [31:0] smp_num,
+    input [15:0] seq_num,
+
+    // eth signals
+    input eth_clk_in,
+    input req_ready,
+    output send_req,
+
+    // output axis
+    output logic [7:0]      m_axis_tdata,
+    output logic            m_axis_tvalid,
+    input  logic            m_axis_tready,
+    output logic            m_axis_tlast,
+
+    output logic finish
+    );
+
+    wire [ACCUM_WIDTH-1:0] out_data;
+    wire out_valid;
+    wire readout_begin;
+    wire batch_req;
+
+    accumulator #(
+        .DATA_WIDTH(DATA_WIDTH),
+        .ACCUM_WIDTH(ACCUM_WIDTH),
+        .N_MAX(N_MAX),
+        .WINDOW_SIZE(WINDOW_SIZE),
+        .PACKET_SIZE(PACKET_SIZE)
+    ) accum_main (
+        .clk_in(clk_in),
+        .rst(rst),
+        .s_axis_tdata(s_axis_tdata),
+        .s_axis_tvalid(s_axis_tvalid),
+        .start(start),
+        .smp_num(smp_num),
+        .seq_num(seq_num),
+        .out_data(out_data),
+        .out_valid(out_valid),
+        .readout_begin(readout_begin),
+        .batch_req(batch_req),
+        .finish(finish)
+    );
+
+    out_axis_fifo #(
+        .ACCUM_WIDTH(ACCUM_WIDTH),
+        .WINDOW_SIZE(WINDOW_SIZE),
+        .PACKET_SIZE(PACKET_SIZE)
+    ) output_async_fifo (
+        .eth_clk_in    (eth_clk_in),
+        .acc_clk_in    (clk_in),
+        .rst           (rst),
+        .smp_num       (smp_num),
+
+        .m_axis_tdata  (m_axis_tdata),
+        .m_axis_tvalid (m_axis_tvalid),
+        .m_axis_tready (m_axis_tready),
+        .m_axis_tlast  (m_axis_tlast),
+
+        .acc_din       (out_data),
+        .din_valid     (out_valid),
+
+        .readout_begin (readout_begin),
+
+        .req_ready     (req_ready),
+        .send_req      (send_req),
+
+        .batch_req     (batch_req),
+        .finish        (finish)
+    );
+endmodule

rtl/accum/src/adder.sv

@@ -0,0 +1,52 @@
+`timescale 1ns / 1ps
+
+
+module adder
+#(
+    parameter DATA_WIDTH = 12,
+    parameter WINDOW_SIZE = 4,
+    parameter ACCUM_WIDTH = 32
+    )
+(
+    input clk_in,
+    input rst,
+    input [DATA_WIDTH-1:0] s_axis_tdata,
+    input s_axis_tvalid,
+    
+    output [ACCUM_WIDTH-1:0] sum_data,
+    output sum_valid
+    );
+
+    logic [ACCUM_WIDTH-1:0] accum, res;
+    logic [DATA_WIDTH-1:0] axis_data;
+    logic res_valid, axis_valid;
+ (* MARK_DEBUG = "TRUE" *)   logic [15:0] cnt;
+    
+    always @(posedge clk_in) begin
+        if (rst) begin
+            accum <= '0;
+            cnt <= '0;
+            res <= '0;
+            res_valid <= 0;
+        end else begin
+            res_valid <= 0;
+            axis_data <= s_axis_tdata;
+            axis_valid <= s_axis_tvalid;
+            if ( axis_valid) begin
+                if (cnt == WINDOW_SIZE-1) begin
+                    res <= accum + axis_data;
+                    res_valid <= 1;
+                    accum <= '0;
+                    cnt <= '0;
+                end else begin
+                    accum <= accum + axis_data;
+                    cnt   <= cnt + 1;
+                end
+            end
+        end
+    end 
+   
+    assign sum_valid = res_valid;
+    assign sum_data = res;
+    
+endmodule

rtl/accum/src/out_axis_fifo.sv

@@ -0,0 +1,324 @@
+module out_axis_fifo #(
+    parameter ACCUM_WIDTH = 32,
+    parameter WINDOW_SIZE = 65,
+    parameter PACKET_SIZE = 1024
+) (
+    input  logic                eth_clk_in,
+    input  logic                acc_clk_in,
+    input  logic                rst,
+    input  logic [31:0]         smp_num,
+
+    // AXI stream master for output, eth_clk_in domain
+    output logic [7:0]          m_axis_tdata,
+    output logic                m_axis_tvalid,
+    input  logic                m_axis_tready,
+    output logic                m_axis_tlast,
+    // eth handshake
+    input  logic                req_ready,
+    output logic                send_req,
+    output logic [15:0]         udp_data_length,
+
+    // data from acc
+    input  logic [ACCUM_WIDTH-1:0]   acc_din,
+    input  logic                     din_valid,
+    
+    // input pulse
+    input  logic                readout_begin,
+
+    // output pulses
+    output logic batch_req,
+    output logic finish      
+);
+    // sync reset
+    reg [1:0] rst_sync_ff;
+    reg rst_eth;
+
+    always @(posedge acc_clk_in or posedge rst) begin
+        if (rst) begin
+            rst_sync_ff <= 2'b11;
+        end else begin
+            rst_sync_ff <= {rst_sync_ff[0], 1'b0};
+        end
+    end
+
+    assign rst_eth = rst_sync_ff[1];
+
+    logic [1:0] rst_acc_ff;
+    logic rst_acc;
+
+    always_ff @(posedge acc_clk_in or posedge rst) begin
+        if (rst)
+            rst_acc_ff <= 2'b11;
+        else
+            rst_acc_ff <= {rst_acc_ff[0], 1'b0};
+    end
+
+    assign rst_acc = rst_acc_ff[1];
+
+
+    // fifo params calc
+    // round up to be enough for 2xPACKET_SIZE storage
+    localparam int MIN_BYTES      = 2 * PACKET_SIZE;
+    localparam int MIN_BITS       = MIN_BYTES * 8;
+    localparam int MIN_WR_WORDS   = (MIN_BITS + ACCUM_WIDTH - 1) / ACCUM_WIDTH; // ceil div
+    localparam int WDEPTH_BITS    = $clog2(MIN_WR_WORDS);
+    localparam int FIFO_WDEPTH    = 1 << WDEPTH_BITS;
+
+    localparam int FIFO_RDEPTH     = FIFO_WDEPTH * ACCUM_WIDTH / 8;
+    localparam int RDEPTH_BITS     = $clog2(FIFO_RDEPTH) + 1;
+
+    wire wr_unavail;
+    wire wr_rst_busy;
+    reg rd_en;
+    
+    
+    typedef enum logic [2:0] {
+        WR_IDLE         = 3'd0,
+        WR_CHECK        = 3'd1,
+        WR_RUN          = 3'd2,
+        WR_END          = 3'd3
+    } wr_state_t;
+
+    (* MARK_DEBUG="true" *) wr_state_t wr_state;
+    
+    // Write FSM
+    reg [31:0] wr_cnt;       // current BIT mem ptr
+    reg [31:0] wr_batch_tgt; // next 'target' that should be written from batch
+    reg [31:0] wr_total;     // total BITS to be sent!
+
+    wire empty;
+
+    wire [WDEPTH_BITS:0] wr_data_count;
+
+    // NOTE:
+    // each written "acc_din" ACCUM_WIDTH word
+    // is counted as WINDOWS_SIZE samples actually
+    // because hw division for counters is painful
+    // so we just increased the counter sizes
+
+    always_ff @(posedge acc_clk_in) begin
+        if (rst_acc) begin
+            wr_state        <= WR_IDLE;
+            wr_cnt          <= 32'b0;
+            wr_batch_tgt    <= 32'b0;
+            wr_total        <= 32'b0;
+            batch_req       <= 0;
+            finish          <= 0;
+            
+        end else begin
+
+            case (wr_state)
+                // wait until readout is requested
+                WR_IDLE: begin
+                    if (readout_begin) begin 
+                        wr_cnt <= 32'b0;
+                        wr_state <= WR_CHECK;
+                        wr_total <= smp_num * ACCUM_WIDTH;
+                        wr_batch_tgt <= 32'b0;
+                        batch_req <= 0;
+                        finish <= 0;
+                    end
+                end
+                
+                // wait until we can request a word
+                // depends on prog_full signal
+                WR_CHECK: begin
+                    if ((wr_data_count < (FIFO_WDEPTH - (PACKET_SIZE / (ACCUM_WIDTH / 8)))) && ~wr_rst_busy) begin
+                        batch_req <= 1;
+                        // should give us exactly PACKET_SIZE * 8 bits
+                        // multiplied by WINDOW_SIZE, because we count 
+                        // each given ACCUM_WIDTH word as WINDOWS_SIZE samples !!!
+                        wr_batch_tgt <= wr_batch_tgt + (8 * WINDOW_SIZE * PACKET_SIZE);
+                        wr_state <= WR_RUN;
+                    end else begin
+                        batch_req <= 0;
+                    end
+                end
+
+                // wait until all requested packet is written
+                WR_RUN: begin
+                    batch_req <= 0;
+                    if (wr_cnt == wr_batch_tgt) begin
+                        // got enough words
+                        wr_state <= WR_END;
+                    end else if (wr_cnt > wr_batch_tgt) begin
+                        // weird case when accum gave us too much words
+                        // block resets
+                        wr_cnt <= 32'hffffffff;  // sort of signal for sim/ila
+                        wr_state <= WR_END;
+                    end
+
+                    if (din_valid) begin
+                        // data supplied
+                        // count as we got WINDOW_SIZE samples
+                        wr_cnt <= wr_cnt + ACCUM_WIDTH * WINDOW_SIZE;
+                    end
+                end
+
+                // check if this was last data batch
+                WR_END: begin
+                    // here we check that we sent enough data
+                    // wr_cnt should be by design PACKET_SIZE-aligned
+                    if (wr_cnt >= wr_total) begin
+                        // wait until all data is sent
+                        if (empty) begin
+                            finish <= 1;
+                            wr_state <= WR_IDLE;
+                        end
+                    end else begin
+                        // next word
+                        wr_state <= WR_CHECK;
+                    end
+                end
+            endcase
+        end
+    end
+
+    // Readout FSM with ethernet request
+
+    assign udp_data_length = PACKET_SIZE;  // fixed packet size
+    reg [15:0] sent_cnt;
+
+    typedef enum logic [2:0] {
+        RD_IDLE         = 3'd0,
+        RD_CHECK        = 3'd1,
+        RD_SEND         = 3'd2
+    } rd_state_t;
+
+    (* MARK_DEBUG="true" *) rd_state_t rd_state;
+
+    wire rd_valid;
+    wire [RDEPTH_BITS-1:0] rd_data_count;
+
+    always_ff @(posedge eth_clk_in) begin
+        if (rst_eth) begin
+            rd_state <= RD_IDLE;
+            send_req <= 1'b0;
+            sent_cnt <= 16'd0;
+            m_axis_tlast <= 1'b0;
+            m_axis_tvalid <= 1'b0;
+            rd_en <= 1'b0;
+            
+        end else begin
+
+            case (rd_state)
+                // wait until fifo has enough data to send
+                RD_IDLE: begin
+                    if (rd_data_count == PACKET_SIZE) begin
+                        // enough data to send packet, begin
+                        rd_state <= RD_CHECK;
+                    end
+                    send_req <= 1'b0;
+                    sent_cnt <= 16'd0;
+                    rd_en <= 1'b0;
+                    m_axis_tlast <= 1'b0;
+                    m_axis_tvalid <= 1'b0;
+                end
+
+                // await udp ready
+                RD_CHECK: begin
+                    if (req_ready) begin
+                        send_req <= 1'b1;
+                        rd_state <= RD_SEND;
+                    end
+                end
+
+                // send data
+                RD_SEND: begin
+                    // udp is ready and fifo is ready = sent
+                    send_req <= 1'b0;
+                    if (m_axis_tready && rd_valid) begin
+                        rd_en <= 1'b1;
+                        m_axis_tvalid <= 1'b1;
+                        sent_cnt <= sent_cnt + 1;
+                        // final packet of the batch
+                        if (sent_cnt == PACKET_SIZE - 1) begin
+                            rd_state <= RD_IDLE;
+                            m_axis_tlast <= 1'b1;
+                        end
+                    end else begin
+                        rd_en <= 1'b0;
+                        m_axis_tvalid <= 1'b0;
+                    end
+                end
+            endcase
+        end
+    end
+
+    logic [ACCUM_WIDTH-1:0] fifo_din_r, acc_din_reg, din_valid_reg;
+    logic                   fifo_wr_en_r;
+
+    always_ff @(posedge acc_clk_in) begin
+        if (rst_acc) begin
+            fifo_din_r   <= '0;
+            fifo_wr_en_r <= 1'b0;
+   
+            din_valid_reg <= 1'b0;
+        end else begin
+            fifo_wr_en_r  <= 1'b0;
+            acc_din_reg <= acc_din;
+            
+            if (!wr_rst_busy && din_valid_reg) begin
+                fifo_din_r   <= acc_din_reg;
+                fifo_wr_en_r  <= 1'b1;
+            end
+
+            din_valid_reg <= din_valid;
+        end
+    end
+
+    // xpm_fifo_async: Asynchronous FIFO
+    // Xilinx Parameterized Macro, version 2025.1
+
+    xpm_fifo_async #(
+        .DOUT_RESET_VALUE("0"),        // String
+        .FIFO_READ_LATENCY(1),         // DECIMAL
+        .FIFO_WRITE_DEPTH(FIFO_WDEPTH), 
+        .FULL_RESET_VALUE(0),
+        .PROG_EMPTY_THRESH(PACKET_SIZE),
+        .PROG_FULL_THRESH(PACKET_SIZE / (ACCUM_WIDTH / 8)),
+        .RD_DATA_COUNT_WIDTH(RDEPTH_BITS),    
+        .READ_DATA_WIDTH(8),           // always 8 bit for eth
+        .READ_MODE("fwft"),            
+        .SIM_ASSERT_CHK(1),            // DECIMAL; 0=disable simulation messages, 1=enable simulation messages
+        .USE_ADV_FEATURES("1616"),     // String
+        .WRITE_DATA_WIDTH(ACCUM_WIDTH),
+        .WR_DATA_COUNT_WIDTH(WDEPTH_BITS+1)
+    )
+    xpm_fifo_async_inst (
+
+        .data_valid(rd_valid),       // 1-bit output: Read Data Valid: When asserted, this signal indicates that valid data is available on the
+                                        // output bus (dout).
+
+        .dout(m_axis_tdata),
+        .empty(empty), 
+    
+        .full( ),                 
+
+        .prog_full(wr_unavail),         // 1-bit output: Programmable Full: This signal is asserted when the number of words in the FIFO is greater than
+                                        // or equal to the programmable full threshold value. It is de-asserted when the number of words in the FIFO is
+                                        // less than the programmable full threshold value.
+
+        .rd_data_count(rd_data_count), // RD_DATA_COUNT_WIDTH-bit output: Read Data Count: This bus indicates the number of words read from the FIFO.
+
+        .wr_data_count(wr_data_count), // WR_DATA_COUNT_WIDTH-bit output: Write Data Count: This bus indicates the number of words written into the
+                                        // FIFO.
+
+
+
+
+        .rd_clk(eth_clk_in),               // 1-bit input: Read clock: Used for read operation. rd_clk must be a free running clock.
+        .rd_en(rd_en),                 // 1-bit input: Read Enable: If the FIFO is not empty, asserting this signal causes data (on dout) to be read
+                                        // from the FIFO. Must be held active-low when rd_rst_busy is active high.
+
+        .rst(rst),
+        
+        .din(fifo_din_r),                     // WRITE_DATA_WIDTH-bit input: Write Data: The input data bus used when writing the FIFO.
+        .wr_clk(acc_clk_in),               // 1-bit input: Write clock: Used for write operation. wr_clk must be a free running clock.
+        .wr_en(fifo_wr_en_r),
+
+        .wr_rst_busy(wr_rst_busy)
+
+    );
+
+endmodule

rtl/accum/tests/Makefile

@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: MIT
+#
+# Copyright (c) 2025 FPGA Ninja, LLC
+#
+# Authors:
+# - Alex Forencich
+#
+
+# FPGA settings
+FPGA_PART = xc7a35tfgg484-1
+FPGA_TOP = accumulator_top
+FPGA_ARCH = artix7
+
+RTL_DIR = ../src
+
+
+include ../../../scripts/vivado.mk
+
+SYN_FILES += $(sort $(shell find ../src -type f \( -name '*.v' -o -name '*.sv' \)))
+
+XCI_FILES = $(sort $(shell find ../src -type f -name '*.xci'))
+
+XDC_FILES += ../../../constraints/ax7a035b.xdc
+XDC_FILES += test_timing.xdc
+
+SYN_FILES += out_axis_fifo_tb.sv
+SYN_FILES += accum_full_tb.sv
+SIM_TOP = tb_accumulator_top
+
+
+program: $(PROJECT).bit
+	echo "open_hw_manager" > program.tcl
+	echo "connect_hw_server" >> program.tcl
+	echo "open_hw_target" >> program.tcl
+	echo "current_hw_device [lindex [get_hw_devices] 0]" >> program.tcl
+	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> program.tcl
+	echo "set_property PROGRAM.FILE {$(PROJECT).bit} [current_hw_device]" >> program.tcl
+	echo "program_hw_devices [current_hw_device]" >> program.tcl
+	echo "exit" >> program.tcl
+	vivado -nojournal -nolog -mode batch -source program.tcl
+
+$(PROJECT).mcs $(PROJECT).prm: $(PROJECT).bit
+	echo "write_cfgmem -force -format mcs -size 16 -interface SPIx4 -loadbit {up 0x0000000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
+	echo "exit" >> generate_mcs.tcl
+	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
+	mkdir -p rev
+	COUNT=100; \
+	while [ -e rev/$*_rev$$COUNT.bit ]; \
+	do COUNT=$$((COUNT+1)); done; \
+	COUNT=$$((COUNT-1)); \
+	for x in .mcs .prm; \
+	do cp $*$$x rev/$*_rev$$COUNT$$x; \
+	echo "Output: rev/$*_rev$$COUNT$$x"; done;

rtl/accum/tests/accum_full_tb.sv

@@ -0,0 +1,348 @@
+`timescale 1ns / 1ps
+
+module tb_accumulator_top;
+
+    localparam DATA_WIDTH      = 12;
+    localparam ACCUM_WIDTH     = 32;
+    localparam N_MAX           = 4096;
+    localparam WINDOW_SIZE     = 65;
+    localparam PACKET_SIZE     = 1024;
+    localparam READ_BATCH_SIZE = (PACKET_SIZE*8)/ACCUM_WIDTH;
+    localparam MAX_WORDS       = N_MAX;
+    localparam MAX_SEQ_NUM     = 256;
+
+    logic clk_in;
+    logic eth_clk_in;
+    logic rst;
+
+    logic [DATA_WIDTH-1:0] s_axis_tdata;
+    logic                  s_axis_tvalid;
+    logic                  start;
+    logic [31:0]           smp_num;
+    logic [15:0]           seq_num;
+
+    logic                  req_ready;
+    wire                   send_req;
+
+    wire  [7:0]            m_axis_tdata;
+    wire                   m_axis_tvalid;
+    logic                  m_axis_tready;
+    wire                   m_axis_tlast;
+
+    wire                   finish;
+
+    integer seed;
+    integer total_errors;
+    integer tests_total;
+    integer tests_failed;
+    integer tests_passed;
+
+    integer packets_seen;
+    integer current_packet_byte_count;
+    integer total_words_captured;
+
+    byte packet_bytes [0:PACKET_SIZE-1];
+    logic [ACCUM_WIDTH-1:0] expected_words   [0:MAX_WORDS-1];
+    logic [ACCUM_WIDTH-1:0] captured_words_le[0:MAX_WORDS-1];
+    logic [ACCUM_WIDTH-1:0] captured_words_be[0:MAX_WORDS-1];
+
+    accumulator_top #(
+        .DATA_WIDTH(DATA_WIDTH),
+        .ACCUM_WIDTH(ACCUM_WIDTH),
+        .N_MAX(N_MAX),
+        .WINDOW_SIZE(WINDOW_SIZE),
+        .PACKET_SIZE(PACKET_SIZE)
+    ) dut (
+        .clk_in(clk_in),
+        .rst(rst),
+        .s_axis_tdata(s_axis_tdata),
+        .s_axis_tvalid(s_axis_tvalid),
+        .start(start),
+        .smp_num(smp_num),
+        .seq_num(seq_num),
+        .eth_clk_in(eth_clk_in),
+        .req_ready(req_ready),
+        .send_req(send_req),
+        .m_axis_tdata(m_axis_tdata),
+        .m_axis_tvalid(m_axis_tvalid),
+        .m_axis_tready(m_axis_tready),
+        .m_axis_tlast(m_axis_tlast),
+        .finish(finish)
+    );
+
+    initial begin
+        clk_in = 1'b0;
+        forever #5 clk_in = ~clk_in;
+    end
+
+    initial begin
+        eth_clk_in = 1'b0;
+        forever #4 eth_clk_in = ~eth_clk_in;
+    end
+
+    task automatic clear_scoreboard;
+        integer i;
+    begin
+        packets_seen              = 0;
+        current_packet_byte_count = 0;
+        total_words_captured      = 0;
+        for (i = 0; i < MAX_WORDS; i = i + 1) begin
+            expected_words[i]    = '0;
+            captured_words_le[i] = '0;
+            captured_words_be[i] = '0;
+        end
+        for (i = 0; i < PACKET_SIZE; i = i + 1)
+            packet_bytes[i] = 8'h00;
+    end
+    endtask
+
+    task automatic reset_dut;
+    begin
+        rst           = 1'b1;
+        start         = 1'b0;
+        s_axis_tdata  = '0;
+        s_axis_tvalid = 1'b0;
+        smp_num       = '0;
+        seq_num       = '0;
+        req_ready     = 1'b0;
+        m_axis_tready = 1'b1;
+        clear_scoreboard();
+
+        repeat(12) @(posedge clk_in);
+        rst = 1'b0;
+        repeat(8) @(posedge clk_in);
+    end
+    endtask
+
+    task automatic pulse_start;
+    begin
+        @(posedge clk_in);
+        start <= 1'b1;
+        @(posedge clk_in);
+        start <= 1'b0;
+    end
+    endtask
+
+    task automatic send_one_sample(input logic [DATA_WIDTH-1:0] val);
+    begin
+        @(posedge clk_in);
+        s_axis_tdata  <= val;
+        s_axis_tvalid <= 1'b1;
+    end
+    endtask
+
+    task automatic stop_stream;
+    begin
+        @(posedge clk_in);
+        s_axis_tdata  <= '0;
+        s_axis_tvalid <= 1'b0;
+    end
+    endtask
+
+    task automatic run_test(
+        input integer test_id,
+        input integer seq_num_i,
+        input integer smp_num_i,
+        input bit     randomize_data,
+        input integer base_value,
+        input string  test_name
+    );
+        logic [DATA_WIDTH-1:0] sample_mem [0:MAX_SEQ_NUM-1][0:(N_MAX*WINDOW_SIZE)-1];
+        integer seq_idx;
+        integer sample_idx;
+        integer word_idx;
+        integer k;
+        integer exp_word_count;
+        integer exp_packet_count;
+        integer sample_value;
+        integer local_sum;
+        integer timeout_cnt;
+        bit le_ok;
+        bit be_ok;
+        integer errors_before;
+        integer i;
+    begin
+        tests_total   = tests_total + 1;
+        errors_before = total_errors;
+
+        if (smp_num_i <= 0 || smp_num_i > N_MAX * WINDOW_SIZE || (smp_num_i % WINDOW_SIZE) != 0)
+            $fatal(1, "[%0s] invalid smp_num=%0d", test_name, smp_num_i);
+        if (seq_num_i <= 0 || seq_num_i > MAX_SEQ_NUM)
+            $fatal(1, "[%0s] invalid seq_num=%0d", test_name, seq_num_i);
+
+        $display("\n========================================");
+        $display("TEST %0d: %0s", test_id, test_name);
+        $display("seq_num=%0d smp_num=%0d randomize=%0d", seq_num_i, smp_num_i, randomize_data);
+        $display("========================================");
+
+        reset_dut();
+        smp_num   = smp_num_i;
+        seq_num   = seq_num_i;
+        req_ready = 1'b1; // приемник готов заранее
+
+        exp_word_count   = smp_num_i / WINDOW_SIZE;
+        exp_packet_count = (exp_word_count + READ_BATCH_SIZE - 1) / READ_BATCH_SIZE;
+
+        for (seq_idx = 0; seq_idx < seq_num_i; seq_idx = seq_idx + 1) begin
+            for (sample_idx = 0; sample_idx < smp_num_i; sample_idx = sample_idx + 1) begin
+                if (randomize_data)
+                    sample_value = $unsigned($random(seed)) % (1 << DATA_WIDTH);
+                else
+                    sample_value = (base_value + seq_idx * smp_num_i + sample_idx) % (1 << DATA_WIDTH);
+                sample_mem[seq_idx][sample_idx] = sample_value[DATA_WIDTH-1:0];
+            end
+        end
+
+        for (word_idx = 0; word_idx < exp_word_count; word_idx = word_idx + 1) begin
+            local_sum = 0;
+            for (seq_idx = 0; seq_idx < seq_num_i; seq_idx = seq_idx + 1) begin
+                for (k = 0; k < WINDOW_SIZE; k = k + 1)
+                    local_sum = local_sum + sample_mem[seq_idx][word_idx * WINDOW_SIZE + k];
+            end
+            expected_words[word_idx] = local_sum[ACCUM_WIDTH-1:0];
+            $display("  expected[%0d] = %0d (0x%08x)", word_idx, expected_words[word_idx], expected_words[word_idx]);
+        end
+
+        pulse_start();
+
+        for (seq_idx = 0; seq_idx < seq_num_i; seq_idx = seq_idx + 1) begin
+            for (sample_idx = 0; sample_idx < smp_num_i; sample_idx = sample_idx + 1)
+                send_one_sample(sample_mem[seq_idx][sample_idx]);
+            stop_stream();
+            repeat(2) @(posedge clk_in);
+        end
+
+        timeout_cnt = 0;
+        while (packets_seen < exp_packet_count && timeout_cnt < 50 * PACKET_SIZE) begin
+            @(posedge eth_clk_in);
+            timeout_cnt = timeout_cnt + 1;
+        end
+        if (packets_seen < exp_packet_count) begin
+            $display("[%0s] ERROR: timeout waiting packets, got=%0d exp=%0d",
+                     test_name, packets_seen, exp_packet_count);
+            total_errors = total_errors + 1;
+        end
+
+        timeout_cnt = 0;
+        while (finish !== 1'b1 && timeout_cnt < 30000) begin
+            @(posedge clk_in);
+            timeout_cnt = timeout_cnt + 1;
+        end
+        if (finish !== 1'b1) begin
+            $display("[%0s] ERROR: timeout waiting finish", test_name);
+            total_errors = total_errors + 1;
+        end
+
+        le_ok = 1'b1;
+        be_ok = 1'b1;
+        for (i = 0; i < exp_word_count; i = i + 1) begin
+            if (captured_words_le[i] !== expected_words[i]) le_ok = 1'b0;
+            if (captured_words_be[i] !== expected_words[i]) be_ok = 1'b0;
+        end
+
+        if (!le_ok && !be_ok) begin
+            $display("[%0s] ERROR: payload mismatch", test_name);
+            for (i = 0; i < exp_word_count; i = i + 1)
+                $display("  idx=%0d exp=0x%08x le=0x%08x be=0x%08x",
+                         i, expected_words[i], captured_words_le[i], captured_words_be[i]);
+            total_errors = total_errors + 1;
+        end else if (le_ok) begin
+            $display("[%0s] payload check passed in little-endian", test_name);
+        end else begin
+            $display("[%0s] payload check passed in big-endian", test_name);
+        end
+
+        if (total_errors == errors_before) begin
+            tests_passed = tests_passed + 1;
+            $display("TEST %0d PASSED: %0s", test_id, test_name);
+        end else begin
+            tests_failed = tests_failed + 1;
+            $display("TEST %0d FAILED: %0s", test_id, test_name);
+        end
+
+        req_ready = 1'b0;
+        repeat(10) @(posedge clk_in);
+    end
+    endtask
+
+    always @(posedge eth_clk_in) begin : CAPTURE_AXIS
+        integer idx;
+        logic [31:0] tmp_le;
+        logic [31:0] tmp_be;
+        if (rst) begin
+            current_packet_byte_count = 0;
+        end else if (m_axis_tvalid && m_axis_tready) begin
+            if (current_packet_byte_count < PACKET_SIZE)
+                packet_bytes[current_packet_byte_count] = m_axis_tdata;
+            current_packet_byte_count = current_packet_byte_count + 1;
+
+            if (m_axis_tlast) begin
+                packets_seen = packets_seen + 1;
+
+                if (current_packet_byte_count != PACKET_SIZE) begin
+                    $display("[packet] ERROR: packet size=%0d expected=%0d", current_packet_byte_count, PACKET_SIZE);
+                    total_errors = total_errors + 1;
+                end
+
+                for (idx = 0; idx < READ_BATCH_SIZE; idx = idx + 1) begin
+                    tmp_le = {
+                        packet_bytes[idx*4 + 3],
+                        packet_bytes[idx*4 + 2],
+                        packet_bytes[idx*4 + 1],
+                        packet_bytes[idx*4 + 0]
+                    };
+                    tmp_be = {
+                        packet_bytes[idx*4 + 0],
+                        packet_bytes[idx*4 + 1],
+                        packet_bytes[idx*4 + 2],
+                        packet_bytes[idx*4 + 3]
+                    };
+                    if (total_words_captured + idx < MAX_WORDS) begin
+                        captured_words_le[total_words_captured + idx] = tmp_le;
+                        captured_words_be[total_words_captured + idx] = tmp_be;
+                    end
+                end
+
+                total_words_captured      = total_words_captured + READ_BATCH_SIZE;
+                current_packet_byte_count = 0;
+            end
+        end
+    end
+
+    initial begin
+        seed        = 32'h1badf00d;
+        total_errors = 0;
+        tests_total  = 0;
+        tests_failed = 0;
+        tests_passed = 0;
+
+        reset_dut();
+
+        run_test(1, 1,  1 * WINDOW_SIZE, 1'b0, 1,  "deterministic_small");
+//        $finish;
+        run_test(2, 2,  1 * WINDOW_SIZE, 1'b1, 0,  "random_seq3_smp8");
+        run_test(3, 1, 16 * WINDOW_SIZE, 1'b1, 0,  "random_seq5_smp16_multi_packet");
+        run_test(4, 2, 12 * WINDOW_SIZE, 1'b1, 0,  "random_seq7_smp12");
+        run_test(5, 4, 256 * WINDOW_SIZE, 1'b1, 0,  "random_max_smpnum");
+        run_test(6, 2, 1500 * WINDOW_SIZE, 1'b1, 0,  "random_max_smpnum2");
+        run_test(7, 20,  1 * WINDOW_SIZE, 1'b1, 0,  "random_20seq");
+        run_test(8, 20,  3 * WINDOW_SIZE, 1'b1, 0,  "random_20seqx3");
+        run_test(9, 200,  1 * WINDOW_SIZE, 1'b1, 0,  "random_200seq");
+
+        $display("\n========================================");
+        $display("ALL TESTS COMPLETED");
+        $display("tests_total  = %0d", tests_total);
+        $display("tests_passed = %0d", tests_passed);
+        $display("tests_failed = %0d", tests_failed);
+        $display("total_errors = %0d", total_errors);
+        $display("========================================");
+
+        if (total_errors != 0)
+            $fatal(1, "TB FAILED with %0d error(s)", total_errors);
+        else
+            $display("TB PASSED");
+
+        $finish;
+    end
+
+endmodule

rtl/accum/tests/accum_tb.sv

@@ -0,0 +1,183 @@
+`timescale 1ns / 1ps
+
+module tb_accumulator;
+
+    localparam DATA_WIDTH    = 12;
+    localparam ACCUM_WIDTH   = 32;
+    localparam N_MAX         = 64;
+    localparam WINDOW_SIZE   = 4;
+    localparam PACKET_SIZE   = 8;   // bytes
+    localparam READ_BATCH_SIZE = (PACKET_SIZE*8)/ACCUM_WIDTH; // = 2
+
+    reg clk_in;
+    reg rst;
+    reg [DATA_WIDTH-1:0] s_axis_tdata;
+    reg s_axis_tvalid;
+    reg start;
+    reg [31:0] smp_num;
+    reg [15:0] seq_num;
+    wire [ACCUM_WIDTH-1:0] out_data;
+    wire out_valid;
+    wire readout_begin;
+    reg batch_req;
+    reg finish;
+
+    integer i;
+    integer out_count;
+
+    reg [ACCUM_WIDTH-1:0] expected [0:READ_BATCH_SIZE-1];
+    reg [ACCUM_WIDTH-1:0] got      [0:READ_BATCH_SIZE-1];
+
+    accumulator #(
+        .DATA_WIDTH(DATA_WIDTH),
+        .ACCUM_WIDTH(ACCUM_WIDTH),
+        .N_MAX(N_MAX),
+        .WINDOW_SIZE(WINDOW_SIZE),
+        .PACKET_SIZE(PACKET_SIZE)
+    ) dut (
+        .clk_in(clk_in),
+        .rst(rst),
+        .s_axis_tdata(s_axis_tdata),
+        .s_axis_tvalid(s_axis_tvalid),
+        .start(start),
+        .smp_num(smp_num),
+        .seq_num(seq_num),
+        .out_data(out_data),
+        .out_valid(out_valid),
+        .readout_begin(readout_begin),
+        .batch_req(batch_req),
+        .finish(finish)
+    );
+
+    // clock 100 MHz
+    initial begin
+        clk_in = 0;
+        forever #5 clk_in = ~clk_in;
+    end
+
+    // send one sample
+    task send_sample(input [DATA_WIDTH-1:0] val);
+    begin
+        @(posedge clk_in);
+        s_axis_tdata  <= val;
+        s_axis_tvalid <= 1'b1;
+    end
+    endtask
+
+    // one idle cycle after valid stream
+    task end_stream;
+    begin
+        @(posedge clk_in);
+        s_axis_tvalid <= 1'b0;
+        s_axis_tdata  <= '0;
+    end
+    endtask
+
+    // pulse start
+    task pulse_start;
+    begin
+        @(posedge clk_in);
+        start <= 1'b1;
+        @(posedge clk_in);
+        start <= 1'b0;
+    end
+    endtask
+
+    // pulse batch request
+    task pulse_batch_req;
+    begin
+        @(posedge clk_in);
+        batch_req <= 1'b1;
+        @(posedge clk_in);
+        batch_req <= 1'b0;
+    end
+    endtask
+
+    initial begin
+        repeat(100) @(posedge clk_in);
+        // init
+        rst          = 1'b1;
+        s_axis_tdata = '0;
+        s_axis_tvalid= 1'b0;
+        start        = 1'b0;
+        smp_num      = 32'd8;
+        seq_num      = 16'd2;
+        batch_req    = 1'b0;
+        finish       = 1'b0;
+
+        expected[0] = 32'd60;
+        expected[1] = 32'd92;
+
+        repeat(50) @(posedge clk_in);
+        rst = 1'b0;
+        repeat(50) @(posedge clk_in);
+
+        $display("=== TEST START ===");
+
+        pulse_start();
+
+        // seq 0: [1..8]
+        send_sample(12'd1);
+        send_sample(12'd2);
+        send_sample(12'd3);
+        send_sample(12'd4);
+        send_sample(12'd5);
+        send_sample(12'd6);
+        send_sample(12'd7);
+        send_sample(12'd8);
+        end_stream();
+
+        // небольшой зазор
+        repeat(5) @(posedge clk_in);
+
+        // seq 1: [11..18]
+        send_sample(12'd11);
+        send_sample(12'd12);
+        send_sample(12'd13);
+        send_sample(12'd14);
+        send_sample(12'd15);
+        send_sample(12'd16);
+        send_sample(12'd17);
+        send_sample(12'd18);
+        end_stream();
+
+        $display("[%0t] all input data sent, waiting readout_begin...", $time);
+
+        wait(readout_begin == 1'b1);
+        $display("[%0t] readout_begin asserted", $time);
+        repeat(22) @(posedge clk_in);
+        pulse_batch_req();
+
+        out_count = 0;
+
+        // ждём два слова
+        while (out_count < READ_BATCH_SIZE) begin
+            @(posedge clk_in);
+            if (out_valid) begin
+                got[out_count] = out_data;
+                $display("[%0t] out_valid: got[%0d] = %0d", $time, out_count, out_data);
+                out_count = out_count + 1;
+            end
+        end
+
+        // проверка
+        for (i = 0; i < READ_BATCH_SIZE; i = i + 1) begin
+            if (got[i] !== expected[i]) begin
+                $error("Mismatch at index %0d: got=%0d expected=%0d", i, got[i], expected[i]);
+            end else begin
+                $display("OK index %0d: %0d", i, got[i]);
+            end
+        end
+
+        // завершаем readout
+        @(posedge clk_in);
+        finish <= 1'b1;
+
+
+        repeat(10) @(posedge clk_in);
+
+        $display("=== TEST PASSED ===");
+        $finish;
+    end
+
+endmodule

rtl/accum/tests/out_axis_fifo_tb.sv

@@ -0,0 +1,290 @@
+`timescale 1ns/1ps
+
+module tb_out_axis_fifo;
+
+    localparam int ACCUM_WIDTH = 32;
+    localparam int WINDOW_SIZE = 65;
+    localparam int PACKET_SIZE = 8;
+    localparam int BYTES_PER_WORD = ACCUM_WIDTH / 8;
+    localparam int WORDS_PER_BATCH = PACKET_SIZE / BYTES_PER_WORD; // 1024 / 4 = 256 слов
+
+    logic eth_clk_in;
+    logic acc_clk_in;
+    logic rst;
+
+    logic [31:0] smp_num;
+
+    logic [7:0]  m_axis_tdata;
+    logic        m_axis_tvalid;
+    logic        m_axis_tready;
+    logic        m_axis_tlast;
+
+    logic [ACCUM_WIDTH-1:0] acc_din;
+    logic                   din_valid;
+
+    logic send_req;
+    logic req_ready;
+
+    logic readout_begin;
+
+    logic batch_req;
+    logic finish;
+
+    out_axis_fifo #(
+        .ACCUM_WIDTH(ACCUM_WIDTH),
+        .WINDOW_SIZE(WINDOW_SIZE),
+        .PACKET_SIZE(PACKET_SIZE)
+    ) dut (
+        .eth_clk_in    (eth_clk_in),
+        .acc_clk_in    (acc_clk_in),
+        .rst           (rst),
+        .smp_num       (smp_num),
+
+        .m_axis_tdata  (m_axis_tdata),
+        .m_axis_tvalid (m_axis_tvalid),
+        .m_axis_tready (m_axis_tready),
+        .m_axis_tlast  (m_axis_tlast),
+
+        .acc_din       (acc_din),
+        .din_valid     (din_valid),
+
+        .readout_begin (readout_begin),
+
+        .req_ready     (req_ready),
+        .send_req      (send_req),
+
+        .batch_req     (batch_req),
+        .finish        (finish)
+    );
+
+    // clocks
+    initial begin
+        eth_clk_in = 0;
+        forever #6 eth_clk_in = ~eth_clk_in;   // 125
+    end
+
+    initial begin
+        acc_clk_in = 0;
+        forever #7.692307692 acc_clk_in = ~acc_clk_in;   // 65
+    end
+
+    // scoreboard
+    byte expected_bytes[$];
+    int unsigned compared_bytes;
+    int unsigned mismatch_count;
+    int unsigned total_pushed_words;
+
+    task automatic scoreboard_reset();
+        begin
+            expected_bytes.delete();
+            compared_bytes   = 0;
+            mismatch_count   = 0;
+            total_pushed_words = 0;
+        end
+    endtask
+
+    task automatic push_expected_word(input logic [ACCUM_WIDTH-1:0] word);
+        begin
+            // queue push
+            expected_bytes.push_back(word[7:0]);
+            expected_bytes.push_back(word[15:8]);
+            expected_bytes.push_back(word[23:16]);
+            expected_bytes.push_back(word[31:24]);
+            total_pushed_words++;
+        end
+    endtask
+
+    task automatic check_expected_empty(string case_name);
+        begin
+            if (expected_bytes.size() != 0) begin
+                $error("[%0t] %s: expected_bytes is not empty, remaining=%0d",
+                       $time, case_name, expected_bytes.size());
+            end else begin
+                $display("[%0t] %s: scoreboard queue empty, all expected bytes were transmitted",
+                         $time, case_name);
+            end
+        end
+    endtask
+
+    // axis check
+    always_ff @(posedge eth_clk_in or posedge rst) begin
+        byte exp_byte;
+        if (rst) begin
+            compared_bytes <= 0;
+            mismatch_count <= 0;
+        end else begin
+            if (m_axis_tvalid && m_axis_tready) begin
+                if (expected_bytes.size() == 0) begin
+                    $error("[%0t] AXIS produced unexpected byte 0x%02x: expected queue is empty",
+                           $time, m_axis_tdata);
+                    mismatch_count <= mismatch_count + 1;
+                end else begin
+                    exp_byte = expected_bytes.pop_front();
+                    compared_bytes <= compared_bytes + 1;
+
+                    if (m_axis_tdata !== exp_byte) begin
+                        $error("[%0t] AXIS mismatch at byte #%0d: got=0x%02x expected=0x%02x",
+                               $time, compared_bytes, m_axis_tdata, exp_byte);
+                        mismatch_count <= mismatch_count + 1;
+                    end
+                end
+            end
+        end
+    end
+
+    // helpers
+    task automatic do_reset();
+        begin
+            rst           = 1'b1;
+            readout_begin = 1'b0;
+            din_valid     = 1'b0;
+            acc_din       = '0;
+            smp_num       = '0;
+
+            scoreboard_reset();
+
+            repeat (10) @(posedge acc_clk_in);
+            rst = 1'b0;
+
+            repeat (10) @(posedge acc_clk_in);
+        end
+    endtask
+
+    task automatic pulse_readout_begin(input logic [31:0] smp_num_i);
+        begin
+            smp_num = smp_num_i;
+            @(posedge acc_clk_in);
+            readout_begin <= 1'b1;
+            @(posedge acc_clk_in);
+            readout_begin <= 1'b0;
+        end
+    endtask
+
+    task automatic send_random_words(input int unsigned n_words);
+        int unsigned i;
+        logic [ACCUM_WIDTH-1:0] rand_word;
+        begin
+            for (i = 0; i < n_words; i++) begin
+                rand_word = $urandom;
+
+                @(posedge acc_clk_in);
+                din_valid <= 1'b1;
+                acc_din   <= rand_word;
+
+                // expected result
+                push_expected_word(rand_word);
+            end
+
+            @(posedge acc_clk_in);
+            din_valid <= 1'b0;
+            acc_din   <= '0;
+        end
+    endtask
+
+
+    // 1. set smp_num
+    // 2. pulse readout_begon
+    // 3. send 1KB (PACKET_SIZE) after each batch_req pulse
+    // 4. wait for finish
+    // 5. compare axis result
+    task automatic run_case(input logic [31:0] smp_num_i);
+        int batch_count;
+        string case_name;
+        begin
+            batch_count = 0;
+            case_name = $sformatf("run_case(smp_num=%0d)", smp_num_i);
+
+            $display("[%0t] %s start", $time, case_name);
+
+            pulse_readout_begin(smp_num_i);
+
+            while (finish !== 1'b1) begin
+                @(posedge acc_clk_in);
+
+                if (batch_req) begin
+                    batch_count++;
+                    $display("[%0t] %s: batch_req #%0d -> send %0d words",
+                             $time, case_name, batch_count, WORDS_PER_BATCH);
+
+                    send_random_words(WORDS_PER_BATCH);
+                end
+            end
+
+
+            repeat (200) @(posedge eth_clk_in);
+
+            $display("[%0t] %s done: batches=%0d, pushed_words=%0d, compared_bytes=%0d, mismatches=%0d, wr_cnt=%0d, wr_total=%0d",
+                     $time, case_name, batch_count, total_pushed_words, compared_bytes, mismatch_count,
+                     dut.wr_cnt, dut.wr_total);
+
+            check_expected_empty(case_name);
+
+            if (mismatch_count != 0) begin
+                $fatal(1, "[%0t] %s FAILED: mismatches=%0d", $time, case_name, mismatch_count);
+            end else begin
+                $display("[%0t] %s PASSED", $time, case_name);
+            end
+
+            @(posedge acc_clk_in);
+        end
+    endtask
+
+    // eth beh simulator
+    int axis_byte_count;
+
+    always_ff @(posedge eth_clk_in or posedge rst) begin
+        if (rst) begin
+            axis_byte_count <= 0;
+            req_ready       <= 0;
+            m_axis_tready   <= 1'b0;
+        end else begin
+            req_ready <= 1;
+
+            // request send
+            if (send_req) begin
+                m_axis_tready <= 1'b1;
+                req_ready <= 0;
+            end
+
+            if (m_axis_tvalid && m_axis_tready) begin
+                axis_byte_count <= axis_byte_count + 1;
+            end
+        end
+    end
+
+
+    // main
+    initial begin
+        // init
+        rst           = 1'b0;
+        readout_begin = 1'b0;
+        din_valid     = 1'b0;
+        acc_din       = '0;
+        smp_num       = '0;
+
+        repeat (500) @(posedge acc_clk_in);
+
+        // 1
+        do_reset();
+        repeat (500) @(posedge acc_clk_in);
+        run_case(32'd17);
+        repeat (20) @(posedge acc_clk_in);
+
+        // 2
+        do_reset();
+        run_case(32'd1024);
+        repeat (20) @(posedge acc_clk_in);
+
+        // 3
+        do_reset();
+        run_case(32'd77777);
+        repeat (20) @(posedge acc_clk_in);
+
+        do_reset();
+        repeat (20) @(posedge acc_clk_in);
+
+        $display("[%0t] ALL TESTS DONE", $time);
+        $finish;
+    end
+
+endmodule

rtl/accum/tests/tb_accumulator_top_behav.wcfg

@@ -0,0 +1,183 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<wave_config>
+   <wave_state>
+   </wave_state>
+   <db_ref_list>
+      <db_ref path="tb_accumulator_top_behav.wdb" id="1">
+         <top_modules>
+            <top_module name="glbl" />
+            <top_module name="tb_accumulator_top" />
+         </top_modules>
+      </db_ref>
+   </db_ref_list>
+   <zoom_setting>
+      <ZoomStartTime time="2,748,541.000 ns"></ZoomStartTime>
+      <ZoomEndTime time="2,749,382.001 ns"></ZoomEndTime>
+      <Cursor1Time time="2,749,045.000 ns"></Cursor1Time>
+   </zoom_setting>
+   <column_width_setting>
+      <NameColumnWidth column_width="556"></NameColumnWidth>
+      <ValueColumnWidth column_width="107"></ValueColumnWidth>
+   </column_width_setting>
+   <WVObjectSize size="18" />
+   <wvobject type="logic" fp_name="/tb_accumulator_top/clk_in">
+      <obj_property name="ElementShortName">clk_in</obj_property>
+      <obj_property name="ObjectShortName">clk_in</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_accumulator_top/eth_clk_in">
+      <obj_property name="ElementShortName">eth_clk_in</obj_property>
+      <obj_property name="ObjectShortName">eth_clk_in</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_accumulator_top/rst">
+      <obj_property name="ElementShortName">rst</obj_property>
+      <obj_property name="ObjectShortName">rst</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_accumulator_top/s_axis_tdata">
+      <obj_property name="ElementShortName">s_axis_tdata[11:0]</obj_property>
+      <obj_property name="ObjectShortName">s_axis_tdata[11:0]</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_accumulator_top/s_axis_tvalid">
+      <obj_property name="ElementShortName">s_axis_tvalid</obj_property>
+      <obj_property name="ObjectShortName">s_axis_tvalid</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_accumulator_top/start">
+      <obj_property name="ElementShortName">start</obj_property>
+      <obj_property name="ObjectShortName">start</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_accumulator_top/smp_num">
+      <obj_property name="ElementShortName">smp_num[31:0]</obj_property>
+      <obj_property name="ObjectShortName">smp_num[31:0]</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_accumulator_top/seq_num">
+      <obj_property name="ElementShortName">seq_num[15:0]</obj_property>
+      <obj_property name="ObjectShortName">seq_num[15:0]</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_accumulator_top/req_ready">
+      <obj_property name="ElementShortName">req_ready</obj_property>
+      <obj_property name="ObjectShortName">req_ready</obj_property>
+      <obj_property name="CustomSignalColor">#E0FFFF</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_accumulator_top/send_req">
+      <obj_property name="ElementShortName">send_req</obj_property>
+      <obj_property name="ObjectShortName">send_req</obj_property>
+      <obj_property name="CustomSignalColor">#E0FFFF</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_accumulator_top/m_axis_tdata">
+      <obj_property name="ElementShortName">m_axis_tdata[7:0]</obj_property>
+      <obj_property name="ObjectShortName">m_axis_tdata[7:0]</obj_property>
+      <obj_property name="CustomSignalColor">#008080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_accumulator_top/m_axis_tready">
+      <obj_property name="ElementShortName">m_axis_tready</obj_property>
+      <obj_property name="ObjectShortName">m_axis_tready</obj_property>
+      <obj_property name="CustomSignalColor">#00FFFF</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_accumulator_top/m_axis_tlast">
+      <obj_property name="ElementShortName">m_axis_tlast</obj_property>
+      <obj_property name="ObjectShortName">m_axis_tlast</obj_property>
+      <obj_property name="CustomSignalColor">#008080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_accumulator_top/finish">
+      <obj_property name="ElementShortName">finish</obj_property>
+      <obj_property name="ObjectShortName">finish</obj_property>
+      <obj_property name="CustomSignalColor">#FAAFBE</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_accumulator_top/dut/batch_req">
+      <obj_property name="ElementShortName">batch_req</obj_property>
+      <obj_property name="ObjectShortName">batch_req</obj_property>
+      <obj_property name="CustomSignalColor">#00FFFF</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_accumulator_top/dut/readout_begin">
+      <obj_property name="ElementShortName">readout_begin</obj_property>
+      <obj_property name="ObjectShortName">readout_begin</obj_property>
+      <obj_property name="CustomSignalColor">#00FFFF</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="group" fp_name="group25">
+      <obj_property name="label">acc</obj_property>
+      <obj_property name="DisplayName">label</obj_property>
+      <obj_property name="isExpanded"></obj_property>
+      <wvobject type="array" fp_name="/tb_accumulator_top/dut/accum_main/PACKET_SIZE">
+         <obj_property name="ElementShortName">PACKET_SIZE[31:0]</obj_property>
+         <obj_property name="ObjectShortName">PACKET_SIZE[31:0]</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_accumulator_top/dut/accum_main/READ_BATCH_SIZE">
+         <obj_property name="ElementShortName">READ_BATCH_SIZE[31:0]</obj_property>
+         <obj_property name="ObjectShortName">READ_BATCH_SIZE[31:0]</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_accumulator_top/dut/accum_main/addrb">
+         <obj_property name="ElementShortName">addrb[15:0]</obj_property>
+         <obj_property name="ObjectShortName">addrb[15:0]</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_accumulator_top/dut/accum_main/wr_state">
+         <obj_property name="ElementShortName">wr_state[3:0]</obj_property>
+         <obj_property name="ObjectShortName">wr_state[3:0]</obj_property>
+      </wvobject>
+   </wvobject>
+   <wvobject type="group" fp_name="group27">
+      <obj_property name="label">fifo</obj_property>
+      <obj_property name="DisplayName">label</obj_property>
+      <obj_property name="isExpanded"></obj_property>
+      <wvobject type="array" fp_name="/tb_accumulator_top/dut/output_async_fifo/acc_din">
+         <obj_property name="ElementShortName">acc_din[31:0]</obj_property>
+         <obj_property name="ObjectShortName">acc_din[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#FF0080</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject type="logic" fp_name="/tb_accumulator_top/dut/output_async_fifo/din_valid">
+         <obj_property name="ElementShortName">din_valid</obj_property>
+         <obj_property name="ObjectShortName">din_valid</obj_property>
+         <obj_property name="CustomSignalColor">#FF0080</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject type="logic" fp_name="/tb_accumulator_top/dut/output_async_fifo/batch_req">
+         <obj_property name="ElementShortName">batch_req</obj_property>
+         <obj_property name="ObjectShortName">batch_req</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_accumulator_top/dut/output_async_fifo/wr_state">
+         <obj_property name="ElementShortName">wr_state[2:0]</obj_property>
+         <obj_property name="ObjectShortName">wr_state[2:0]</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_accumulator_top/dut/output_async_fifo/rd_state">
+         <obj_property name="ElementShortName">rd_state[2:0]</obj_property>
+         <obj_property name="ObjectShortName">rd_state[2:0]</obj_property>
+      </wvobject>
+      <wvobject type="logic" fp_name="/tb_accumulator_top/dut/output_async_fifo/wr_unavail">
+         <obj_property name="ElementShortName">wr_unavail</obj_property>
+         <obj_property name="ObjectShortName">wr_unavail</obj_property>
+         <obj_property name="CustomSignalColor">#FFFF00</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject type="logic" fp_name="/tb_accumulator_top/dut/output_async_fifo/wr_rst_busy">
+         <obj_property name="ElementShortName">wr_rst_busy</obj_property>
+         <obj_property name="ObjectShortName">wr_rst_busy</obj_property>
+         <obj_property name="CustomSignalColor">#FFFF00</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject type="logic" fp_name="/tb_accumulator_top/dut/output_async_fifo/xpm_fifo_async_inst/empty">
+         <obj_property name="ElementShortName">empty</obj_property>
+         <obj_property name="ObjectShortName">empty</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_accumulator_top/dut/output_async_fifo/xpm_fifo_async_inst/PROG_FULL_THRESH">
+         <obj_property name="ElementShortName">PROG_FULL_THRESH[31:0]</obj_property>
+         <obj_property name="ObjectShortName">PROG_FULL_THRESH[31:0]</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_accumulator_top/dut/output_async_fifo/xpm_fifo_async_inst/wr_data_count">
+         <obj_property name="ElementShortName">wr_data_count[9:0]</obj_property>
+         <obj_property name="ObjectShortName">wr_data_count[9:0]</obj_property>
+         <obj_property name="Radix">UNSIGNEDDECRADIX</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_accumulator_top/dut/output_async_fifo/xpm_fifo_async_inst/rd_data_count">
+         <obj_property name="ElementShortName">rd_data_count[11:0]</obj_property>
+         <obj_property name="ObjectShortName">rd_data_count[11:0]</obj_property>
+         <obj_property name="Radix">UNSIGNEDDECRADIX</obj_property>
+      </wvobject>
+   </wvobject>
+</wave_config>

rtl/accum/tests/tb_out_axis_fifo_behav.wcfg

@@ -0,0 +1,196 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<wave_config>
+   <wave_state>
+   </wave_state>
+   <db_ref_list>
+      <db_ref path="tb_out_axis_fifo_behav.wdb" id="1">
+         <top_modules>
+            <top_module name="glbl" />
+            <top_module name="tb_out_axis_fifo" />
+         </top_modules>
+      </db_ref>
+   </db_ref_list>
+   <zoom_setting>
+      <ZoomStartTime time="18,433.000 ns"></ZoomStartTime>
+      <ZoomEndTime time="24,238.001 ns"></ZoomEndTime>
+      <Cursor1Time time="21,618.000 ns"></Cursor1Time>
+   </zoom_setting>
+   <column_width_setting>
+      <NameColumnWidth column_width="196"></NameColumnWidth>
+      <ValueColumnWidth column_width="147"></ValueColumnWidth>
+   </column_width_setting>
+   <WVObjectSize size="37" />
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/eth_clk_in">
+      <obj_property name="ElementShortName">eth_clk_in</obj_property>
+      <obj_property name="ObjectShortName">eth_clk_in</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/acc_clk_in">
+      <obj_property name="ElementShortName">acc_clk_in</obj_property>
+      <obj_property name="ObjectShortName">acc_clk_in</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/rst">
+      <obj_property name="ElementShortName">rst</obj_property>
+      <obj_property name="ObjectShortName">rst</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_out_axis_fifo/smp_num">
+      <obj_property name="ElementShortName">smp_num[31:0]</obj_property>
+      <obj_property name="ObjectShortName">smp_num[31:0]</obj_property>
+      <obj_property name="Radix">UNSIGNEDDECRADIX</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_out_axis_fifo/acc_din">
+      <obj_property name="ElementShortName">acc_din[31:0]</obj_property>
+      <obj_property name="ObjectShortName">acc_din[31:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FF0080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/din_valid">
+      <obj_property name="ElementShortName">din_valid</obj_property>
+      <obj_property name="ObjectShortName">din_valid</obj_property>
+      <obj_property name="CustomSignalColor">#FF0080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_out_axis_fifo/dut/fifo_din_r">
+      <obj_property name="ElementShortName">fifo_din_r[31:0]</obj_property>
+      <obj_property name="ObjectShortName">fifo_din_r[31:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/dut/fifo_wr_en_r">
+      <obj_property name="ElementShortName">fifo_wr_en_r</obj_property>
+      <obj_property name="ObjectShortName">fifo_wr_en_r</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/readout_begin">
+      <obj_property name="ElementShortName">readout_begin</obj_property>
+      <obj_property name="ObjectShortName">readout_begin</obj_property>
+      <obj_property name="CustomSignalColor">#FFFF00</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/batch_req">
+      <obj_property name="ElementShortName">batch_req</obj_property>
+      <obj_property name="ObjectShortName">batch_req</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/finish">
+      <obj_property name="ElementShortName">finish</obj_property>
+      <obj_property name="ObjectShortName">finish</obj_property>
+      <obj_property name="CustomSignalColor">#00FFFF</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_out_axis_fifo/dut/m_axis_tdata">
+      <obj_property name="ElementShortName">m_axis_tdata[7:0]</obj_property>
+      <obj_property name="ObjectShortName">m_axis_tdata[7:0]</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/dut/m_axis_tvalid">
+      <obj_property name="ElementShortName">m_axis_tvalid</obj_property>
+      <obj_property name="ObjectShortName">m_axis_tvalid</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/dut/m_axis_tready">
+      <obj_property name="ElementShortName">m_axis_tready</obj_property>
+      <obj_property name="ObjectShortName">m_axis_tready</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/dut/m_axis_tlast">
+      <obj_property name="ElementShortName">m_axis_tlast</obj_property>
+      <obj_property name="ObjectShortName">m_axis_tlast</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_out_axis_fifo/axis_byte_count">
+      <obj_property name="ElementShortName">axis_byte_count[31:0]</obj_property>
+      <obj_property name="ObjectShortName">axis_byte_count[31:0]</obj_property>
+      <obj_property name="Radix">UNSIGNEDDECRADIX</obj_property>
+      <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_out_axis_fifo/ACCUM_WIDTH">
+      <obj_property name="ElementShortName">ACCUM_WIDTH[31:0]</obj_property>
+      <obj_property name="ObjectShortName">ACCUM_WIDTH[31:0]</obj_property>
+      <obj_property name="Radix">UNSIGNEDDECRADIX</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_out_axis_fifo/WINDOW_SIZE">
+      <obj_property name="ElementShortName">WINDOW_SIZE[31:0]</obj_property>
+      <obj_property name="ObjectShortName">WINDOW_SIZE[31:0]</obj_property>
+      <obj_property name="Radix">UNSIGNEDDECRADIX</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_out_axis_fifo/PACKET_SIZE">
+      <obj_property name="ElementShortName">PACKET_SIZE[31:0]</obj_property>
+      <obj_property name="ObjectShortName">PACKET_SIZE[31:0]</obj_property>
+      <obj_property name="Radix">UNSIGNEDDECRADIX</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_out_axis_fifo/dut/wr_state">
+      <obj_property name="ElementShortName">wr_state[2:0]</obj_property>
+      <obj_property name="ObjectShortName">wr_state[2:0]</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_out_axis_fifo/dut/wr_cnt">
+      <obj_property name="ElementShortName">wr_cnt[31:0]</obj_property>
+      <obj_property name="ObjectShortName">wr_cnt[31:0]</obj_property>
+      <obj_property name="Radix">UNSIGNEDDECRADIX</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_out_axis_fifo/dut/wr_batch_tgt">
+      <obj_property name="ElementShortName">wr_batch_tgt[31:0]</obj_property>
+      <obj_property name="ObjectShortName">wr_batch_tgt[31:0]</obj_property>
+      <obj_property name="Radix">UNSIGNEDDECRADIX</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_out_axis_fifo/dut/wr_total">
+      <obj_property name="ElementShortName">wr_total[31:0]</obj_property>
+      <obj_property name="ObjectShortName">wr_total[31:0]</obj_property>
+      <obj_property name="Radix">UNSIGNEDDECRADIX</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/dut/xpm_fifo_async_inst/prog_empty">
+      <obj_property name="ElementShortName">prog_empty</obj_property>
+      <obj_property name="ObjectShortName">prog_empty</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/dut/xpm_fifo_async_inst/prog_full">
+      <obj_property name="ElementShortName">prog_full</obj_property>
+      <obj_property name="ObjectShortName">prog_full</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/dut/xpm_fifo_async_inst/wr_ack">
+      <obj_property name="ElementShortName">wr_ack</obj_property>
+      <obj_property name="ObjectShortName">wr_ack</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_out_axis_fifo/dut/xpm_fifo_async_inst/wr_data_count">
+      <obj_property name="ElementShortName">wr_data_count[2:0]</obj_property>
+      <obj_property name="ObjectShortName">wr_data_count[2:0]</obj_property>
+      <obj_property name="Radix">UNSIGNEDDECRADIX</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_out_axis_fifo/dut/xpm_fifo_async_inst/wr_data_count">
+      <obj_property name="ElementShortName">wr_data_count[2:0]</obj_property>
+      <obj_property name="ObjectShortName">wr_data_count[2:0]</obj_property>
+      <obj_property name="Radix">UNSIGNEDDECRADIX</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_out_axis_fifo/dut/xpm_fifo_async_inst/rd_data_count">
+      <obj_property name="ElementShortName">rd_data_count[4:0]</obj_property>
+      <obj_property name="ObjectShortName">rd_data_count[4:0]</obj_property>
+      <obj_property name="Radix">UNSIGNEDDECRADIX</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_out_axis_fifo/dut/rst_sync_ff">
+      <obj_property name="ElementShortName">rst_sync_ff[1:0]</obj_property>
+      <obj_property name="ObjectShortName">rst_sync_ff[1:0]</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_out_axis_fifo/dut/rd_state">
+      <obj_property name="ElementShortName">rd_state[2:0]</obj_property>
+      <obj_property name="ObjectShortName">rd_state[2:0]</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/dut/rd_en">
+      <obj_property name="ElementShortName">rd_en</obj_property>
+      <obj_property name="ObjectShortName">rd_en</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/dut/rd_valid">
+      <obj_property name="ElementShortName">rd_valid</obj_property>
+      <obj_property name="ObjectShortName">rd_valid</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/dut/xpm_fifo_async_inst/overflow">
+      <obj_property name="ElementShortName">overflow</obj_property>
+      <obj_property name="ObjectShortName">overflow</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/dut/xpm_fifo_async_inst/wr_rst_busy">
+      <obj_property name="ElementShortName">wr_rst_busy</obj_property>
+      <obj_property name="ObjectShortName">wr_rst_busy</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/send_req">
+      <obj_property name="ElementShortName">send_req</obj_property>
+      <obj_property name="ObjectShortName">send_req</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_out_axis_fifo/req_ready">
+      <obj_property name="ElementShortName">req_ready</obj_property>
+      <obj_property name="ObjectShortName">req_ready</obj_property>
+   </wvobject>
+</wave_config>

rtl/accum/tests/test_timing.xdc

@@ -0,0 +1,10 @@
+# Primary clocks
+create_clock -name eth_clk -period 8.000  [get_ports eth_clk_in]
+create_clock -name acc_clk -period 15.385  [get_ports clk_in]
+
+
+# Asynchronous clock groups
+
+set_clock_groups -name ASYNC_ETH_ACC -asynchronous \
+    -group [get_clocks eth_clk] \
+    -group [get_clocks acc_clk]

rtl/controller/README.md

@@ -0,0 +1,63 @@
+# Системный контроллер
+
+Контроллер принимает входные пакеты udp с ethernet, передаваемые по axi stream, и выполняет настройку выходных регистров в соотвествии с содержимым этого пакета, а также синхронизирует сигналы между тремя clock domains - есть clk от ethernet, clk для ЦАП и clk для АЦП
+
+## Список параметров:
+- dac_data_width - битность данных ЦАП, <= 16bit
+
+## Список входных портов:
+- eth_clk_in - базовая входная частота
+- dac_clk_in - входная частота ЦАП
+- adc_clk_in - входная частота АЦП
+- rst_n - общий reset 
+- s_axis [8 bit] - AXI stream slave для приема данных от ethernet udp (уже разобранный payload по байтам) - домен eth_clk
+- finish - сигнал окончания приема данных с АЦП, домен adc_clk !
+
+## Список выходных портов:
+- dac_pulse_width[31:0] - выход pulse_width в домене dac_clk
+- dac_pulse_period[31:0] - выход pulse_period в домене dac_clk
+- dac_pulse_height[dac_data_width-1:0] - выход pulse_height в домене dac_clk
+- dac_pulse_num[15:0] - выход pulse_num в домене dac_clk
+---
+- adc_pulse_period[31:0] - выход pulse_period в домене adc_clk
+- adc_pulse_num[15:0] - выход pulse_num в домене adc_clk
+---
+- dac_start - start в домене dac_clk
+- adc_start - start в домене adc_clk
+---
+- dac_rst - rst в домене dac_clk
+- adc_rst - rst в домене adc_clk
+
+## Логика работы:
+по умолчанию после инициализации блок встает в состояние ожидания (*idle*), и становится *ready* для приема данных по axis.
+далее ждет контрольный пакет. всего есть 3 вариации контрольных пакетов (в любом порядке), получаемых по axi stream:
+```
+8'b00001111 - soft reset
+8'b11110000 - start
+8'b10001000 - set_data
+```
+
+*soft reset* отправляет пульс rst на dac_rst и adc_rst, синхронизировав пульсы в их доменах. при этом сброс самого контроллера не происходит, значения остаются как и были
+
+*start* отправляет пульс start на dac_start и adc_start в их доменах. при этом после этого блок перестает быть ready и ждет, пока не придет пульс finish, после этого он возвращается снова в *idle* состояние
+
+*set_data* значит, что следующие 128 бит = 16*8 байт, пришедшии по axis - это конфигурационная информация и ее нужно записать в внутренний регистр на 128 бит.
+
+конфигурационный регистр на 128 бит делится так:
+```
+reg[31:0] - pulse_width
+reg[63:32] - pulse_period
+reg[79:64] - pulse_num
+reg[79+dac_data_width:80] - pulse_height
+reg[127:96] - pulse_period_adc
+```
+
+соотвественно эти записанные значения выставляются на соотвествующие выходные сигналы в доменах dac_clk и adc_clk. выходы обновляются каждый раз, когда происходит set_data, и сигналы сохраняют своё значение до следующего set_data.
+
+## Симуляция
+Тесты запускаются автоматически через make.
+```
+cd tests
+make sim
+```
+Должно выдать "All tests done" в конце симуляции.

rtl/controller/src/axi4l_reg_map_controller.sv

@@ -0,0 +1,122 @@
+module axi4l_reg_map_controller #(
+  parameter int unsigned ADDR_W = 16,
+  parameter int unsigned DATA_W = 32,
+  parameter int unsigned USER_W = 1
+)(
+  input  logic clk,
+  input  logic rst_n,
+  axi4l_if.slave s_axil,
+// dac adc registers
+  output logic        start_o,
+  output logic        cfg_bus_valid_o,
+  output logic [31:0] pulse_width_o,
+  output logic [31:0] pulse_period_o,
+  output logic [31:0] pulse_num_o,
+  output logic [31:0] pulse_height_raw_o,
+  output logic [31:0] pulse_period_ADC_o,
+  output logic [31:0] window_size_o,
+
+  // DMA CONTROL SIGNALS
+    output logic        send_desc_read_o,
+    output logic        send_desc_write_o,
+    output logic        take_status_read_o,
+    output logic        take_status_write_o,
+
+    input logic         desc_read_dma_busy_i,
+    input logic         desc_write_dma_busy_i,
+    input logic         status_read_dma_busy_i,
+    input logic         status_write_dma_busy_i,
+
+    input logic         desc_read_dma_hs_i,
+    input logic         desc_write_dma_hs_i,
+    input logic         status_read_dma_hs_i,
+    input logic         status_write_dma_hs_i,
+
+  // DMA read descriptors and status register
+
+  output logic [31:0] desc_read_addr_o,
+  output logic [31:0] desc_read_len_o,
+  output logic [31:0] desc_read_config_o,
+
+  input  logic [31:0] status_read_i,
+
+  // DMA write descriptors and status register
+  output logic [31:0] desc_write_addr_o,
+  output logic [31:0] desc_write_len_and_tag_o,
+
+  input  logic [31:0] status_write_len_i,
+  input  logic [31:0] status_write_config_i,
+  
+  output logic        rst_soft_o,
+  input  logic        busy_i,
+  input  logic [7:0]  error_code_i
+);
+  import axi4l_reg_map_controller_pkg::*;
+  localparam int unsigned N_REGS = CTRL_REG_MAP_N_REGS;
+
+  logic [N_REGS-1:0][31:0] reg_i;
+  logic [N_REGS-1:0][31:0] reg_o;
+  logic [N_REGS-1:0][31:0] reg_pulse;
+
+  axi4l_reg_map #(
+    .ADDR_W  (ADDR_W),
+    .DATA_W  (DATA_W),
+    .USER_W  (USER_W),
+    .N_REGS  (N_REGS),
+    .REG_MODE (CTRL_REG_MAP_REG_MODE),
+    .REG_RST (CTRL_REG_MAP_REG_RST)
+  ) u_reg_map (
+    .clk      (clk),
+    .rst_n    (rst_n),
+    .s_axil   (s_axil),
+    .reg_i    (reg_i),
+    .reg_o    (reg_o),
+    .reg_pulse(reg_pulse)
+  );
+
+  always_comb begin
+    reg_i = '0;
+
+    reg_i[REG_STATUS][0] = busy_i;
+
+    reg_i[REG_STATUS][1] = desc_read_dma_busy_i;
+    reg_i[REG_STATUS][2] = desc_write_dma_busy_i;
+    reg_i[REG_STATUS][3] = status_read_dma_busy_i;
+    reg_i[REG_STATUS][4] = status_write_dma_busy_i;
+
+    reg_i[REG_STATUS][5] = desc_read_dma_hs_i;
+    reg_i[REG_STATUS][6] = desc_write_dma_hs_i;
+    reg_i[REG_STATUS][7] = status_read_dma_hs_i;
+    reg_i[REG_STATUS][8] = status_write_dma_hs_i;
+
+    reg_i[REG_ERROR][7:0] = error_code_i;
+
+    reg_i[REG_READ_STATUS] = status_read_i;
+    reg_i[REG_STATUS_WRITE_LEN] = status_write_len_i;
+    reg_i[REG_STATUS_WRITE_CONFIG] = status_write_config_i;
+
+  end
+
+  assign start_o                  = reg_pulse[REG_CONTROL][0];
+  assign rst_soft_o               = reg_pulse[REG_CONTROL][1];
+  assign cfg_bus_valid_o          = reg_pulse[REG_CONTROL][2];
+
+  assign send_desc_read_o         = reg_pulse[REG_CONTROL][3];
+  assign send_desc_write_o        = reg_pulse[REG_CONTROL][4];
+  assign take_status_read_o       = reg_pulse[REG_CONTROL][5];
+  assign take_status_write_o      = reg_pulse[REG_CONTROL][6];
+
+  assign pulse_width_o            = reg_o[REG_DAC_WIDTH];
+  assign pulse_period_o           = reg_o[REG_DAC_PERIOD];
+  assign pulse_num_o              = reg_o[REG_DAC_PULSE_NUM];
+  assign pulse_height_raw_o       = reg_o[REG_DAC_PULSE_HEIGHT]; 
+  assign pulse_period_ADC_o       = reg_o[REG_ADC_PERIOD]; 
+  assign window_size_o            = reg_o[REG_WINDOW_SIZE];
+
+  assign desc_read_addr_o         = reg_o[REG_DESC_READ_ADDR];
+  assign desc_read_len_o          = reg_o[REG_DESC_READ_LEN];
+  assign desc_read_config_o       = reg_o[REG_DESC_READ_CONFIG];
+  assign desc_write_addr_o        = reg_o[REG_DESC_WRITE_ADDR];
+  assign desc_write_len_and_tag_o = reg_o[REG_DESC_WRITE_LEN_AND_TAG];
+
+endmodule

rtl/controller/src/axi4l_reg_map_controller_pkg.sv

@@ -0,0 +1,109 @@
+package axi4l_reg_map_controller_pkg;
+
+  localparam int unsigned CTRL_REG_MAP_N_REGS = 17;
+
+/*
+dac adc configuration registers
+*/
+  localparam logic [31:0] REG_CONTROL                = 32'd0;
+  localparam logic [31:0] REG_STATUS                 = 32'd1;
+  localparam logic [31:0] REG_DAC_WIDTH              = 32'd2; 
+  localparam logic [31:0] REG_DAC_PERIOD             = 32'd3;
+  localparam logic [31:0] REG_DAC_PULSE_NUM          = 32'd4;
+  localparam logic [31:0] REG_DAC_PULSE_HEIGHT       = 32'd5;
+  localparam logic [31:0] REG_ADC_PERIOD             = 32'd6;
+  localparam logic [31:0] REG_WINDOW_SIZE            = 32'd7;
+  localparam logic [31:0] REG_ERROR                  = 32'd8;
+
+/*
+AXI read descriptor input and AXI read descriptor status output configuration registers
+*/
+  localparam logic [31:0] REG_DESC_READ_ADDR         = 32'd9;
+  localparam logic [31:0] REG_DESC_READ_LEN          = 32'd10;
+  localparam logic [31:0] REG_DESC_READ_CONFIG       = 32'd11;
+
+  localparam logic [31:0] REG_READ_STATUS            = 32'd12;
+
+/*
+AXI write descriptor input and AXI write descriptor status output configuration registers
+*/
+  localparam logic [31:0] REG_DESC_WRITE_ADDR        = 32'd13;
+  localparam logic [31:0] REG_DESC_WRITE_LEN_AND_TAG = 32'd14;
+
+  localparam logic [31:0] REG_STATUS_WRITE_LEN       = 32'd15;
+  localparam logic [31:0] REG_STATUS_WRITE_CONFIG    = 32'd16;
+
+
+  localparam logic [2:0] REG_BIT_RSVD = 3'd0;
+  localparam logic [2:0] REG_BIT_RO   = 3'd1;
+  localparam logic [2:0] REG_BIT_RW   = 3'd2;
+  localparam logic [2:0] REG_BIT_W1S  = 3'd3;
+
+ localparam logic [CTRL_REG_MAP_N_REGS-1:0][31:0][2:0] CTRL_REG_MAP_REG_MODE = '{
+  default: '{default: REG_BIT_RSVD},
+
+  REG_CONTROL: '{
+    0 : REG_BIT_W1S,
+    1 : REG_BIT_W1S,
+    2 : REG_BIT_W1S,
+    3 : REG_BIT_W1S,
+    4 : REG_BIT_W1S,
+    5 : REG_BIT_W1S,
+    6 : REG_BIT_W1S,
+    default: REG_BIT_RSVD
+  },
+
+  REG_STATUS: '{
+    0 : REG_BIT_RO,
+    1 : REG_BIT_RO,
+    2 : REG_BIT_RO,
+    3 : REG_BIT_RO,
+    4 : REG_BIT_RO,
+    5 : REG_BIT_RO,
+    6 : REG_BIT_RO,
+    7 : REG_BIT_RO,
+    8 : REG_BIT_RO,
+    default: REG_BIT_RSVD
+  },
+
+  REG_DAC_WIDTH:        '{default: REG_BIT_RW},
+  REG_DAC_PERIOD:       '{default: REG_BIT_RW},
+  REG_DAC_PULSE_NUM:    '{default: REG_BIT_RW},
+  REG_DAC_PULSE_HEIGHT: '{default: REG_BIT_RW},
+  REG_ADC_PERIOD:       '{default: REG_BIT_RW},
+  REG_WINDOW_SIZE:      '{default: REG_BIT_RW},
+
+  REG_ERROR:            '{default: REG_BIT_RO},
+
+  REG_DESC_READ_ADDR:   '{default: REG_BIT_RW},
+  REG_DESC_READ_LEN:    '{default: REG_BIT_RW},
+  REG_DESC_READ_CONFIG: '{default: REG_BIT_RW},
+  REG_READ_STATUS:      '{default: REG_BIT_RO},
+
+  REG_DESC_WRITE_ADDR:        '{default: REG_BIT_RW},
+  REG_DESC_WRITE_LEN_AND_TAG: '{default: REG_BIT_RW},
+  REG_STATUS_WRITE_LEN:       '{default: REG_BIT_RO},
+  REG_STATUS_WRITE_CONFIG:    '{default: REG_BIT_RO}
+};
+
+  localparam logic [CTRL_REG_MAP_N_REGS-1:0][31:0] CTRL_REG_MAP_REG_RST = '{
+    32'h0000_0000,
+    32'h0000_0000,
+    32'h0000_0000,
+    32'h0000_0000,
+    32'h0000_0000,
+    32'h0000_0000,
+    32'h0000_0000,
+    32'h0000_0000,
+    32'h0000_0000,
+    32'h0000_0000,
+    32'h0000_0000,
+    32'h0000_0000,
+    32'h0000_0000,
+    32'h0000_0000,
+    32'h0000_0000,
+    32'h0000_0000,
+    32'h0000_0000
+  };
+
+endpackage

rtl/controller/src/axis_defaults_helper.sv

@@ -0,0 +1,13 @@
+module axis_defaults_master
+(
+    axis_if.master axis
+);
+
+assign axis.req.t.keep = '1;
+assign axis.req.t.strb = '1;
+assign axis.req.t.last = 1'b1;
+assign axis.req.t.id   = '0;
+assign axis.req.t.dest = '0;
+assign axis.req.t.user = '0;
+
+endmodule

rtl/controller/src/controller.sv

@@ -0,0 +1,338 @@
+module control #(
+    parameter int unsigned DAC_DATA_WIDTH = 12
+) (
+    input  logic                       ctrl_clk,
+    input  logic                       dac_clk_in,
+    input  logic                       adc_clk_in,
+
+    input  logic                       rst_n,
+    input  logic                       rst_soft,
+
+    // adc_clk_in domain
+    input  logic                       finish,
+    input  logic [159:0]               cfg_bus_input,
+    input  logic                       cfg_bus_valid,
+    input  logic                       start,
+
+    // status signals
+    output logic                       busy,
+
+    // dac_clk_in domain outputs
+    output logic [31:0]                dac_pulse_width,
+    output logic [31:0]                dac_pulse_period,
+    output logic [DAC_DATA_WIDTH-1:0]  dac_pulse_height,
+    output logic [15:0]                dac_pulse_num,
+
+    // adc_clk_in domain outputs
+    output logic [31:0]                adc_pulse_period,
+    output logic [15:0]                adc_pulse_num,
+    output logic [31:0]                adc_window_size,
+
+    // pulse outputs
+    output logic                       dac_start,
+    output logic                       adc_start,
+    output logic                       dac_rst,
+    output logic                       adc_rst
+);
+
+    // static checks
+    initial begin
+        if (DAC_DATA_WIDTH > 16) begin
+            $error("DAC_DATA_WIDTH must be <= 16");
+        end
+        if (DAC_DATA_WIDTH == 0) begin
+            $error("DAC_DATA_WIDTH must be > 0");
+        end
+    end
+
+    // reset synchronizers: async assert, sync deassert in each domain
+    logic rst_ff1, rst_ff2;
+    logic dac_rst_ff1, dac_rst_ff2;
+    logic adc_rst_ff1, adc_rst_ff2;
+
+    logic ctrl_rst;
+    logic dac_rst_int;
+    logic adc_rst_int;
+
+    always_ff @(posedge ctrl_clk or negedge rst_n) begin
+        if (!rst_n) begin
+            rst_ff1 <= 1'b1;
+            rst_ff2 <= 1'b1;
+        end else begin
+            rst_ff1 <= 1'b0;
+            rst_ff2 <= rst_ff1;
+        end
+    end
+
+    always_ff @(posedge dac_clk_in or negedge rst_n) begin
+        if (!rst_n) begin
+            dac_rst_ff1 <= 1'b1;
+            dac_rst_ff2 <= 1'b1;
+        end else begin
+            dac_rst_ff1 <= 1'b0;
+            dac_rst_ff2 <= dac_rst_ff1;
+        end
+    end
+
+    always_ff @(posedge adc_clk_in or negedge rst_n) begin
+        if (!rst_n) begin
+            adc_rst_ff1 <= 1'b1;
+            adc_rst_ff2 <= 1'b1;
+        end else begin
+            adc_rst_ff1 <= 1'b0;
+            adc_rst_ff2 <= adc_rst_ff1;
+        end
+    end
+
+    assign ctrl_rst     = rst_ff2;
+    assign dac_rst_int = dac_rst_ff2;
+    assign adc_rst_int = adc_rst_ff2;
+
+    // Pending ACKs for config delivery
+    logic cfg_wait_dac_ack;
+    logic cfg_wait_adc_ack;
+
+    // Event toggles cntrl -> DAC/ADC
+    logic start_toggle;
+    logic rst_toggle;
+
+    // Config request toggles cntrl -> DAC/ADC
+    logic cfg_req_toggle_dac;
+    logic cfg_req_toggle_adc;
+
+    // ACK toggles DAC/ADC -> cntrl
+    logic cfg_ack_toggle_dac;
+    logic cfg_ack_toggle_adc;
+
+    (* ASYNC_REG = "TRUE" *) logic cfg_ack_toggle_dac_meta, cfg_ack_toggle_dac_sync, cfg_ack_toggle_dac_sync_d;
+    (* ASYNC_REG = "TRUE" *) logic cfg_ack_toggle_adc_meta, cfg_ack_toggle_adc_sync, cfg_ack_toggle_adc_sync_d;
+
+    wire cfg_ack_pulse_dac = cfg_ack_toggle_dac_sync ^ cfg_ack_toggle_dac_sync_d;
+    wire cfg_ack_pulse_adc = cfg_ack_toggle_adc_sync ^ cfg_ack_toggle_adc_sync_d;
+
+    always_ff @(posedge ctrl_clk or posedge ctrl_rst) begin
+        if (ctrl_rst) begin
+            cfg_ack_toggle_dac_meta   <= 1'b0;
+            cfg_ack_toggle_dac_sync   <= 1'b0;
+            cfg_ack_toggle_dac_sync_d <= 1'b0;
+
+            cfg_ack_toggle_adc_meta   <= 1'b0;
+            cfg_ack_toggle_adc_sync   <= 1'b0;
+            cfg_ack_toggle_adc_sync_d <= 1'b0;
+        end else begin
+            cfg_ack_toggle_dac_meta   <= cfg_ack_toggle_dac;
+            cfg_ack_toggle_dac_sync   <= cfg_ack_toggle_dac_meta;
+            cfg_ack_toggle_dac_sync_d <= cfg_ack_toggle_dac_sync;
+
+            cfg_ack_toggle_adc_meta   <= cfg_ack_toggle_adc;
+            cfg_ack_toggle_adc_sync   <= cfg_ack_toggle_adc_meta;
+            cfg_ack_toggle_adc_sync_d <= cfg_ack_toggle_adc_sync;
+        end
+    end
+
+    // finish event: ADC -> cntrl via toggle CDC
+    logic finish_toggle_adc;
+    logic finish_meta, finish_sync, finish_sync_d;
+
+    wire finish_pulse = finish_sync ^ finish_sync_d;
+
+    always_ff @(posedge adc_clk_in or posedge adc_rst_int) begin
+        if (adc_rst_int) begin
+            finish_toggle_adc <= 1'b0;
+        end else if (finish) begin
+            finish_toggle_adc <= ~finish_toggle_adc;
+        end
+    end
+
+    always_ff @(posedge ctrl_clk or posedge ctrl_rst) begin
+        if (ctrl_rst) begin
+            finish_meta   <= 1'b0;
+            finish_sync   <= 1'b0;
+            finish_sync_d <= 1'b0;
+        end else begin
+            finish_meta   <= finish_toggle_adc;
+            finish_sync   <= finish_meta;
+            finish_sync_d <= finish_sync;
+        end
+    end
+
+    logic [159:0] cfg_bus;
+
+    always_ff @(posedge ctrl_clk or posedge ctrl_rst) begin
+        if (ctrl_rst) begin
+            cfg_bus <= '0;
+            busy <= 0;
+
+            start_toggle <= 0;
+            rst_toggle   <= 0;
+
+            cfg_req_toggle_dac <= 0;
+            cfg_req_toggle_adc <= 0;
+
+            cfg_wait_dac_ack <= 0;
+            cfg_wait_adc_ack <= 0;
+        end else begin
+            if (finish_pulse) begin
+                busy <= 0;
+            end
+            if (cfg_ack_pulse_dac) begin
+                cfg_wait_dac_ack <= 1'b0;
+            end
+            if (cfg_ack_pulse_adc) begin
+                cfg_wait_adc_ack <= 1'b0;
+            end
+
+             if (cfg_bus_valid && !busy && !cfg_wait_dac_ack && !cfg_wait_adc_ack) begin
+                cfg_bus <= cfg_bus_input;
+
+                cfg_req_toggle_dac <= ~cfg_req_toggle_dac;
+                cfg_req_toggle_adc <= ~cfg_req_toggle_adc;
+
+                cfg_wait_dac_ack <= 1;
+                cfg_wait_adc_ack <= 1;
+            end
+
+            if (start && !busy && !cfg_wait_dac_ack && !cfg_wait_adc_ack) begin
+                start_toggle <= ~start_toggle;
+                busy <= 1;
+            end
+            if (rst_soft) begin
+                rst_toggle <= ~rst_toggle;
+            end
+            
+        end
+    end
+
+    // cntrl -> DAC: start/reset event sync
+    (* ASYNC_REG = "TRUE" *) logic start_meta_dac, start_sync_dac;
+    logic start_sync_dac_d;
+    (* ASYNC_REG = "TRUE" *) logic rst_meta_dac,   rst_sync_dac;
+    logic rst_sync_dac_d;
+
+    wire dac_start_pulse = start_sync_dac ^ start_sync_dac_d;
+    wire dac_rst_pulse   = rst_sync_dac   ^ rst_sync_dac_d;
+
+    always_ff @(posedge dac_clk_in or posedge dac_rst_int) begin
+        if (dac_rst_int) begin
+            start_meta_dac   <= 1'b0;
+            start_sync_dac   <= 1'b0;
+            start_sync_dac_d <= 1'b0;
+
+            rst_meta_dac     <= 1'b0;
+            rst_sync_dac     <= 1'b0;
+            rst_sync_dac_d   <= 1'b0;
+
+            dac_start        <= 1'b0;
+            dac_rst          <= 1'b0;
+        end else begin
+            start_meta_dac   <= start_toggle;
+            start_sync_dac   <= start_meta_dac;
+            start_sync_dac_d <= start_sync_dac;
+
+            rst_meta_dac     <= rst_toggle;
+            rst_sync_dac     <= rst_meta_dac;
+            rst_sync_dac_d   <= rst_sync_dac;
+
+            dac_start        <= dac_start_pulse;
+            dac_rst          <= dac_rst_pulse;
+        end
+    end
+
+    // cntrl -> ADC: start/reset event sync
+    (* ASYNC_REG = "TRUE" *) logic start_meta_adc, start_sync_adc;
+    logic start_sync_adc_d;
+    (* ASYNC_REG = "TRUE" *) logic rst_meta_adc,   rst_sync_adc;
+    logic rst_sync_adc_d;
+
+    wire adc_start_pulse = start_sync_adc ^ start_sync_adc_d;
+    wire adc_rst_pulse   = rst_sync_adc   ^ rst_sync_adc_d;
+
+    always_ff @(posedge adc_clk_in or posedge adc_rst_int) begin
+        if (adc_rst_int) begin
+            start_meta_adc   <= 1'b0;
+            start_sync_adc   <= 1'b0;
+            start_sync_adc_d <= 1'b0;
+
+            rst_meta_adc     <= 1'b0;
+            rst_sync_adc     <= 1'b0;
+            rst_sync_adc_d   <= 1'b0;
+
+            adc_start        <= 1'b0;
+            adc_rst          <= 1'b0;
+        end else begin
+            start_meta_adc   <= start_toggle;
+            start_sync_adc   <= start_meta_adc;
+            start_sync_adc_d <= start_sync_adc;
+
+            rst_meta_adc     <= rst_toggle;
+            rst_sync_adc     <= rst_meta_adc;
+            rst_sync_adc_d   <= rst_sync_adc;
+
+            adc_start        <= adc_start_pulse;
+            adc_rst          <= adc_rst_pulse;
+        end
+    end
+
+    // contrl -> DAC config CDC
+    // cfg_bus is kept stable in contrl domain until DAC and ADC both ACK.
+    (* ASYNC_REG = "TRUE" *) logic cfg_req_meta_dac, cfg_req_sync_dac;
+    logic cfg_req_sync_dac_d;
+    wire  cfg_req_pulse_dac = cfg_req_sync_dac ^ cfg_req_sync_dac_d;
+
+    always_ff @(posedge dac_clk_in or posedge dac_rst_int) begin
+        if (dac_rst_int) begin
+            cfg_req_meta_dac  <= 1'b0;
+            cfg_req_sync_dac  <= 1'b0;
+            cfg_req_sync_dac_d<= 1'b0;
+            cfg_ack_toggle_dac<= 1'b0;
+
+            dac_pulse_width   <= '0;
+            dac_pulse_period  <= '0;
+            dac_pulse_num     <= '0;
+            dac_pulse_height  <= '0;
+        end else begin
+            cfg_req_meta_dac   <= cfg_req_toggle_dac;
+            cfg_req_sync_dac   <= cfg_req_meta_dac;
+            cfg_req_sync_dac_d <= cfg_req_sync_dac;
+
+            if (cfg_req_pulse_dac) begin
+                dac_pulse_width  <= cfg_bus[31:0];
+                dac_pulse_period <= cfg_bus[63:32];
+                dac_pulse_num    <= cfg_bus[79:64];
+                dac_pulse_height <= cfg_bus[80 +: DAC_DATA_WIDTH];
+
+                cfg_ack_toggle_dac <= ~cfg_ack_toggle_dac;
+            end
+        end
+    end
+
+    // cntrl -> ADC config CDC
+    logic cfg_req_meta_adc, cfg_req_sync_adc, cfg_req_sync_adc_d;
+    wire  cfg_req_pulse_adc = cfg_req_sync_adc ^ cfg_req_sync_adc_d;
+
+    always_ff @(posedge adc_clk_in or posedge adc_rst_int) begin
+        if (adc_rst_int) begin
+            cfg_req_meta_adc   <= 1'b0;
+            cfg_req_sync_adc   <= 1'b0;
+            cfg_req_sync_adc_d <= 1'b0;
+            cfg_ack_toggle_adc <= 1'b0;
+
+            adc_pulse_period       <= '0;
+            adc_pulse_num          <= '0;
+            adc_window_size        <= '0;
+        end else begin
+            cfg_req_meta_adc   <= cfg_req_toggle_adc;
+            cfg_req_sync_adc   <= cfg_req_meta_adc;
+            cfg_req_sync_adc_d <= cfg_req_sync_adc;
+
+            if (cfg_req_pulse_adc) begin
+                adc_pulse_period <= cfg_bus[127:96];
+                adc_pulse_num    <= cfg_bus[79:64];
+                adc_window_size  <= cfg_bus[159:128];
+
+                cfg_ack_toggle_adc <= ~cfg_ack_toggle_adc;
+            end
+        end
+    end
+
+endmodule

rtl/controller/src/controller_wrapper_axil.sv

@@ -0,0 +1,221 @@
+import dma_reg_pkg::*;
+
+module controller_wrapper_axil #(
+
+parameter int unsigned ADDR_W             = 16,
+parameter int unsigned DATA_W             = 32,
+parameter int unsigned USER_W             = 1,
+
+parameter int unsigned DAC_DATA_WIDTH     = 12
+)
+(
+    input  logic                       ctrl_clk,
+    input  logic                       dac_clk_in,
+    input  logic                       adc_clk_in,
+    input  logic                       rst_n,
+    axi4l_if.slave                     s_axil,
+
+    // adc_clk_in domain
+    input  logic                       finish,
+    output logic [31:0]                adc_window_size,
+
+    // dac_clk_in domain outputs
+    output logic [31:0]                dac_pulse_width,
+    output logic [31:0]                dac_pulse_period,
+    output logic [DAC_DATA_WIDTH-1:0]  dac_pulse_height,
+    output logic [15:0]                dac_pulse_num,
+
+    // adc_clk_in domain outputs
+    output logic [31:0]                adc_pulse_period,
+    output logic [15:0]                adc_pulse_num,
+
+    // pulse outputs
+    output logic                       dac_start,
+    output logic                       adc_start,
+    output logic                       dac_rst,
+    output logic                       adc_rst,
+
+    // AXIS DMA
+    axis_if.slave            s_axis_status_read,
+    axis_if.slave            s_axis_status_write,
+
+    axis_if.master             m_axis_desc_read,
+    axis_if.master             m_axis_desc_write
+);
+
+    logic start, rst_soft, send_desc_read, send_desc_write, take_status_read, take_status_write, cfg_bus_valid, busy;
+    logic [31:0] pulse_width, pulse_period, pulse_num, pulse_height_raw, pulse_period_ADC, window_size;
+    logic [7:0] error_code;
+    logic [31:0] desc_read_addr, desc_read_len, desc_read_config, status_read;
+    logic [31:0] desc_write_addr, desc_write_len_and_tag, status_write_len, status_write_config;
+    
+    logic desc_read_dma_busy, desc_write_dma_busy, status_read_dma_busy, status_write_dma_busy;
+    logic desc_read_dma_hs, desc_write_dma_hs, status_read_dma_hs, status_write_dma_hs;
+
+    axi4l_reg_map_controller #(
+        .ADDR_W(ADDR_W),
+        .DATA_W(DATA_W),
+        .USER_W(USER_W)
+    ) axi4l_reg_map_controller_inst (
+        .clk(ctrl_clk),
+        .rst_n(rst_n),
+        .s_axil(s_axil),
+    // CONTROLLER ADC/ DAC
+        .start_o(start),
+        .cfg_bus_valid_o(cfg_bus_valid),
+
+        .pulse_width_o(pulse_width),
+        .pulse_period_o(pulse_period),
+        .pulse_num_o(pulse_num),
+        .pulse_height_raw_o(pulse_height_raw),
+        .pulse_period_ADC_o(pulse_period_ADC),
+        .window_size_o(window_size),
+
+        .rst_soft_o(rst_soft),
+        .busy_i(busy),
+        .error_code_i(error_code),
+
+    // CONTROLLER DMA
+        .send_desc_read_o(send_desc_read),
+        .send_desc_write_o(send_desc_write),
+        .take_status_read_o(take_status_read),
+        .take_status_write_o(take_status_write),
+
+        .desc_read_addr_o(desc_read_addr),
+        .desc_read_len_o(desc_read_len),
+        .desc_read_config_o(desc_read_config),
+
+        .status_read_i(status_read),
+
+        .desc_write_addr_o(desc_write_addr),
+        .desc_write_len_and_tag_o(desc_write_len_and_tag),
+
+        .status_write_len_i(status_write_len),
+        .status_write_config_i(status_write_config),
+
+        .desc_read_dma_busy_i(desc_read_dma_busy),
+        .desc_write_dma_busy_i(desc_write_dma_busy),
+        .status_read_dma_busy_i(status_read_dma_busy),
+        .status_write_dma_busy_i(status_write_dma_busy),
+
+        .desc_read_dma_hs_i(desc_read_dma_hs),
+        .desc_write_dma_hs_i(desc_write_dma_hs),
+        .status_read_dma_hs_i(status_read_dma_hs),
+        .status_write_dma_hs_i(status_write_dma_hs)
+    );
+
+    // CONTROLLER DAC ADC 
+    // -------------------------------------------------------------------------
+    // Field layout inside cfg_bus:
+    // [31:0]   pulse_width
+    // [63:32]  pulse_period
+    // [79:64]  pulse_num
+    // [95:80]  pulse_height_raw[15:0]
+    // [127:96] pulse_period_ADC
+    // [159:128] window_size
+    // -------------------------------------------------------------------------
+    (* MARK_DEBUG="true" *) logic [159:0] cfg_bus;
+    assign cfg_bus = {window_size, pulse_period_ADC, pulse_height_raw[15:0], pulse_num[15:0], pulse_period, pulse_width};
+
+    control #(
+        .DAC_DATA_WIDTH(DAC_DATA_WIDTH)
+    )
+    controller (
+        .ctrl_clk(ctrl_clk),
+        .dac_clk_in(dac_clk_in),
+        .adc_clk_in(adc_clk_in),
+        .rst_n(rst_n),
+        .rst_soft(rst_soft),
+        .finish(finish),
+        .cfg_bus_input(cfg_bus),
+        .cfg_bus_valid(cfg_bus_valid),
+        .start(start),
+
+        .busy(busy),
+
+        .dac_pulse_width(dac_pulse_width),
+        .dac_pulse_period(dac_pulse_period),
+        .dac_pulse_height(dac_pulse_height),
+        .dac_pulse_num(dac_pulse_num),
+        .adc_pulse_period(adc_pulse_period),
+        .adc_pulse_num(adc_pulse_num),
+        .adc_window_size(adc_window_size),
+        .dac_start(dac_start),
+        .adc_start(adc_start),
+        .dac_rst(dac_rst),
+        .adc_rst(adc_rst)
+    );
+
+    // CONTROLLER DMA
+
+    dma_read_desc_t  desc_read_cmd, desc_read_cmd_out;
+    assign desc_read_cmd.addr = desc_read_addr;
+    assign desc_read_cmd.len  = desc_read_len;
+    assign desc_read_cmd.tag  = desc_read_config[TAG_WIDTH-1:0];
+    assign desc_read_cmd.id   = desc_read_config[TAG_WIDTH +: AXIS_ID_WIDTH];
+    assign desc_read_cmd.dest = desc_read_config[TAG_WIDTH+AXIS_ID_WIDTH +: AXIS_DEST_WIDTH];
+    assign desc_read_cmd.user = desc_read_config[TAG_WIDTH+AXIS_ID_WIDTH+AXIS_DEST_WIDTH +: AXIS_USER_WIDTH];
+
+    dma_write_desc_t desc_write_cmd, desc_write_cmd_out;
+    assign desc_write_cmd.addr = desc_write_addr;
+    assign desc_write_cmd.len  = desc_write_len_and_tag[LEN_WIDTH-1:0];
+    assign desc_write_cmd.tag  = desc_write_len_and_tag[LEN_WIDTH +: TAG_WIDTH];
+
+    dma_read_status_t status_read_cmd, status_read_cmd_in;
+    assign status_read = { status_read_cmd.error, status_read_cmd.tag};
+
+    dma_write_status_t status_write_cmd, status_write_cmd_in;
+    assign status_write_len = status_write_cmd.len;
+    assign status_write_config = { status_write_cmd.error, status_write_cmd.user, 
+    status_write_cmd.dest, status_write_cmd.id, status_write_cmd.tag};
+
+    dma_controller dma_controller_inst
+    (
+        .dma_clk(ctrl_clk),
+        .rst_n(rst_n),
+
+        .send_desc_read(send_desc_read),
+        .send_desc_write(send_desc_write),
+        .take_status_read(take_status_read),
+        .take_status_write(take_status_write),
+
+        .desc_read_cmd(desc_read_cmd),
+        .desc_write_cmd(desc_write_cmd),
+        .status_read_cmd(status_read_cmd),
+        .status_write_cmd(status_write_cmd),
+
+        .desc_read_cmd_out(desc_read_cmd_out),
+        .desc_write_cmd_out(desc_write_cmd_out),
+        .status_read_cmd_in(status_read_cmd_in),
+        .status_write_cmd_in(status_write_cmd_in),
+
+        .ready_desc_read(m_axis_desc_read.resp.ready),
+        .ready_desc_write(m_axis_desc_write.resp.ready),
+        .ready_status_read(s_axis_status_read.resp.ready),
+        .ready_status_write(s_axis_status_write.resp.ready),
+
+        .valid_desc_read(m_axis_desc_read.req.t.valid),
+        .valid_desc_write(m_axis_desc_write.req.t.valid),
+        .valid_status_read(s_axis_status_read.req.t.valid),
+        .valid_status_write(s_axis_status_write.req.t.valid),
+
+        .desc_read_dma_busy(desc_read_dma_busy),
+        .desc_write_dma_busy(desc_write_dma_busy),
+        .status_read_dma_busy(status_read_dma_busy),
+        .status_write_dma_busy(status_write_dma_busy),
+
+        .desc_read_dma_hs(desc_read_dma_hs),
+        .desc_write_dma_hs(desc_write_dma_hs),
+        .status_read_dma_hs(status_read_dma_hs),
+        .status_write_dma_hs(status_write_dma_hs)
+    );
+
+    axis_defaults_master defaults_rd (.axis(m_axis_desc_read));
+    axis_defaults_master defaults_wr (.axis(m_axis_desc_write));
+
+    assign m_axis_desc_read.req.t.data = desc_read_cmd_out;
+    assign m_axis_desc_write.req.t.data = desc_write_cmd_out;
+    assign status_read_cmd_in = s_axis_status_read.req.t.data;
+    assign status_write_cmd_in = s_axis_status_write.req.t.data;
+
+endmodule

rtl/controller/src/dma_controller.sv

@@ -0,0 +1,111 @@
+import dma_reg_pkg::*;
+
+module dma_controller
+(
+input dma_clk,
+input rst_n,
+input logic send_desc_read,
+input logic send_desc_write,
+input logic take_status_read,
+input logic take_status_write,
+
+input logic ready_desc_read,
+input logic ready_desc_write,
+
+output logic ready_status_read,
+output logic ready_status_write,
+
+input dma_read_desc_t desc_read_cmd,
+input dma_write_desc_t desc_write_cmd,
+
+output dma_read_status_t status_read_cmd,
+output dma_write_status_t status_write_cmd,
+
+input dma_read_status_t status_read_cmd_in,
+input dma_write_status_t status_write_cmd_in,
+
+output logic desc_read_dma_busy,
+output logic desc_write_dma_busy,
+output logic status_read_dma_busy,
+output logic status_write_dma_busy,
+
+output logic desc_read_dma_hs,
+output logic desc_write_dma_hs,
+output logic status_read_dma_hs,
+output logic status_write_dma_hs,
+
+output logic valid_desc_read,
+output logic valid_desc_write,
+
+input logic valid_status_read,
+input logic valid_status_write,
+
+output dma_read_desc_t desc_read_cmd_out,
+output dma_write_desc_t desc_write_cmd_out
+);
+
+shaper_axis_desc 
+#(
+    .DATA_WIDTH($bits(dma_read_desc_t))
+) shaper_axis_desc_read
+(
+    .clk(dma_clk),
+    .rst_n(rst_n),
+    .data_in(desc_read_cmd),
+    .send(send_desc_read),
+    .ready(ready_desc_read),
+    .busy(desc_read_dma_busy),
+    .handshake(desc_read_dma_hs),
+    .data_out(desc_read_cmd_out),
+    .valid(valid_desc_read)
+);
+
+shaper_axis_desc 
+#(
+    .DATA_WIDTH($bits(dma_write_desc_t))
+) shaper_axis_desc_write
+(
+    .clk(dma_clk),
+    .rst_n(rst_n),
+    .data_in(desc_write_cmd),
+    .send(send_desc_write),
+    .ready(ready_desc_write),
+    .busy(desc_write_dma_busy),
+    .handshake(desc_write_dma_hs),
+    .data_out(desc_write_cmd_out),
+    .valid(valid_desc_write)
+);
+
+shaper_axis_status
+#(
+    .DATA_WIDTH($bits(dma_read_status_t))
+) shaper_axis_status_read
+(
+    .clk(dma_clk),
+    .rst_n(rst_n),
+    .data_in(status_read_cmd_in),
+    .take(take_status_read),
+    .valid(valid_status_read),
+    .ready(ready_status_read),
+    .busy(status_read_dma_busy),
+    .handshake(status_read_dma_hs),
+    .data_out(status_read_cmd)
+);
+
+shaper_axis_status
+#(
+    .DATA_WIDTH($bits(dma_write_status_t))
+) shaper_axis_status_write
+(
+    .clk(dma_clk),
+    .rst_n(rst_n),
+    .data_in(status_write_cmd_in),
+    .take(take_status_write),
+    .valid(valid_status_write),
+    .ready(ready_status_write),
+    .busy(status_write_dma_busy),
+    .handshake(status_write_dma_hs),
+    .data_out(status_write_cmd)
+);
+
+endmodule

rtl/controller/src/dma_reg_pkg.sv

@@ -0,0 +1,42 @@
+package dma_reg_pkg;
+    parameter int unsigned AXI_ADDR_WIDTH  = 16;
+    parameter int unsigned LEN_WIDTH       = 20;
+    parameter int unsigned TAG_WIDTH       = 8;
+    parameter int unsigned AXIS_ID_WIDTH   = 8;
+    parameter int unsigned AXIS_DEST_WIDTH = 8;
+    parameter int unsigned AXIS_USER_WIDTH = 1;
+
+    typedef struct packed {
+    logic [AXIS_USER_WIDTH-1:0] user;
+    logic [AXIS_DEST_WIDTH-1:0] dest;
+    logic [AXIS_ID_WIDTH-1:0]   id;
+    logic [TAG_WIDTH-1:0]       tag;
+    logic [LEN_WIDTH-1:0]       len;
+    logic [AXI_ADDR_WIDTH-1:0]  addr;
+    
+  } dma_read_desc_t;
+
+  typedef struct packed {
+    logic [TAG_WIDTH-1:0]       tag;
+    logic [LEN_WIDTH-1:0]       len;
+    logic [AXI_ADDR_WIDTH-1:0]  addr;
+    
+  } dma_write_desc_t;
+
+  typedef struct packed {
+    logic [3:0]                 error;
+    logic [TAG_WIDTH-1:0]       tag;
+    
+  } dma_read_status_t;
+
+typedef struct packed {
+    logic [3:0]                 error;
+    logic [AXIS_USER_WIDTH-1:0] user;
+    logic [AXIS_DEST_WIDTH-1:0] dest;
+    logic [AXIS_ID_WIDTH-1:0]   id;
+    logic [TAG_WIDTH-1:0]       tag;
+    logic [LEN_WIDTH-1:0]       len;
+    
+  } dma_write_status_t;
+
+endpackage

rtl/controller/src/shaper_axis_desc.sv

@@ -0,0 +1,54 @@
+module shaper_axis_desc #(
+    parameter DATA_WIDTH = 128
+) (
+    input clk,
+    input rst_n,
+    input logic [DATA_WIDTH-1:0] data_in,
+    input logic send,
+    input logic ready,
+
+    output logic busy,
+    output logic handshake,
+    output logic [DATA_WIDTH-1:0] data_out,
+    output logic valid
+);
+
+typedef enum logic [0:0] {
+    IDLE,
+    WAIT_READY
+} wr_state;
+
+wr_state state;
+
+always @(posedge clk) begin
+    if (!rst_n) begin
+        state <= IDLE;
+        busy <= 1'b0;
+        handshake <= 1'b0;
+        data_out <= 1'b0;
+        valid <= 1'b0;
+    end else begin
+        case (state)
+            IDLE: begin
+                    handshake <= 1'b0;
+                    if (send) begin
+                        valid <= 1'b1;
+                        data_out <= data_in;
+                        busy <= 1'b1;
+                        state <= WAIT_READY;
+                    end
+                    end
+            WAIT_READY: begin
+                            if (ready) begin
+                                valid <= 1'b0;
+                                handshake <= 1'b1;
+                                busy <= 1'b0;
+                                state <= IDLE;
+                            end
+                        end
+            default: state <= IDLE;
+        endcase
+    end
+end
+    
+endmodule

rtl/controller/src/shaper_axis_status.sv

@@ -0,0 +1,55 @@
+module shaper_axis_status #(
+    parameter int unsigned DATA_WIDTH = 128
+)(
+    input  logic                  clk,
+    input  logic                  rst_n,
+
+    input  logic [DATA_WIDTH-1:0] data_in,
+    input  logic                  take,
+    input  logic                  valid,
+    output logic                  ready,
+
+    output logic                  busy,
+    output logic                  handshake,
+    output logic [DATA_WIDTH-1:0] data_out
+);
+
+typedef enum logic [0:0] {
+    IDLE,
+    WAIT_VALID
+} wr_state;
+
+wr_state state;
+
+always @(posedge clk) begin
+    if (!rst_n) begin
+        state      <= IDLE;
+        ready      <= 1'b0;
+        busy       <= 1'b0;
+        handshake  <= 1'b0;
+        data_out   <= '0;
+    end else begin
+        case (state) 
+        IDLE: begin
+                handshake <= 1'b0;
+                if (take) begin
+                    ready <= 1'b1;
+                    busy <= 1'b1;
+                     state <= WAIT_VALID;
+                end
+              end
+        WAIT_VALID: begin
+                        if (valid) begin
+                            data_out <= data_in;
+                            ready <= 1'b0;
+                            handshake <= 1'b1;
+                            busy <= 1'b0;
+                            state <= IDLE;
+                        end
+                    end
+        endcase
+    end
+end
+
+
+endmodule

rtl/controller/tests/Makefile

@@ -0,0 +1,40 @@
+TOPLEVEL_LANG = verilog
+SIM ?= verilator
+
+PWD := $(shell pwd)
+
+RTL_DIR = $(PWD)/../src
+LIBS_DIR = $(PWD)/../../../external/rtl_libs
+
+VERILOG_SOURCES += $(LIBS_DIR)/axi/rtl/axi_pkg.sv
+VERILOG_SOURCES += $(LIBS_DIR)/axi/rtl/axi_if.sv
+VERILOG_SOURCES += $(LIBS_DIR)/axi/rtl/axi4l_flat_to_if.sv
+VERILOG_SOURCES += $(LIBS_DIR)/axi/rtl/axi4l_if_to_flat.sv
+VERILOG_SOURCES += $(LIBS_DIR)/axi/axi_reg/axi4l_reg_map.sv
+VERILOG_SOURCES += $(RTL_DIR)/controller.sv
+VERILOG_SOURCES += $(RTL_DIR)/dma_controller.sv
+VERILOG_SOURCES += $(RTL_DIR)/shaper_axis_desc.sv
+VERILOG_SOURCES += $(RTL_DIR)/shaper_axis_status.sv
+VERILOG_SOURCES += $(RTL_DIR)/controller_wrapper_axil.sv
+VERILOG_SOURCES += $(RTL_DIR)/axi4l_reg_map_controller_pkg.sv
+VERILOG_SOURCES += $(RTL_DIR)/axi4l_reg_map_controller.sv
+VERILOG_SOURCES += $(PWD)/tb_controller_wrapper_axil.sv
+
+TOPLEVEL = tb_controller_wrapper_axil
+MODULE = test_controller
+
+
+ifeq ($(SIM),verilator)
+    EXTRA_ARGS += --trace --trace-structs
+    EXTRA_ARGS += -I$(LIBS_DIR)/axi/rtl/
+    COMPILE_ARGS += -Wno-fatal
+    COMPILE_ARGS += -I$(LIBS_DIR)/axi/rtl/
+    EXTRA_ARGS += --trace
+    EXTRA_ARGS += --trace-structs
+    EXTRA_ARGS += --public-flat-rw
+    EXTRA_ARGS += -Wno-fatal
+    EXTRA_ARGS += --timing
+endif
+
+
+include $(shell cocotb-config --makefiles)/Makefile.sim

rtl/controller/tests/controller_tb.sv

@@ -0,0 +1,737 @@
+`timescale 1ns/1ps
+
+module tb_control;
+
+    localparam int unsigned DAC_DATA_WIDTH = 12;
+
+    //------------------------------------------------------------
+    // Clocks / reset
+    //------------------------------------------------------------
+    logic ctrl_clk;
+    logic dac_clk_in;
+    logic adc_clk_in;
+    logic rst_n;
+
+    initial begin
+        ctrl_clk = 1'b0;
+        forever #(1 * 4.000) ctrl_clk = ~ctrl_clk;   // 125 MHz
+    end
+
+    initial begin
+        dac_clk_in = 1'b0;
+        forever #(1 * 3.846153846) dac_clk_in = ~dac_clk_in; // ~130 MHz
+    end
+
+    initial begin
+        adc_clk_in = 1'b0;
+        forever #(1 * 7.692307692) adc_clk_in = ~adc_clk_in; // ~65 MHz
+    end
+
+    //------------------------------------------------------------
+    // DUT inputs
+    //------------------------------------------------------------
+
+    logic rst_soft;
+
+    logic finish;
+
+    logic [159:0] cfg_bus_input;
+    logic         cfg_bus_valid;
+
+    logic start;
+
+    //------------------------------------------------------------
+    // DUT outputs
+    //------------------------------------------------------------
+
+    logic busy;
+
+    logic [31:0]               dac_pulse_width;
+    logic [31:0]               dac_pulse_period;
+    logic [DAC_DATA_WIDTH-1:0] dac_pulse_height;
+    logic [15:0]               dac_pulse_num;
+
+    logic [31:0]               adc_pulse_period;
+    logic [15:0]               adc_pulse_num;
+    logic [31:0]               adc_window_size;
+
+    logic dac_start;
+    logic adc_start;
+    logic dac_rst;
+    logic adc_rst;
+
+    //------------------------------------------------------------
+    // DUT
+    //------------------------------------------------------------
+
+    control #(
+        .DAC_DATA_WIDTH(DAC_DATA_WIDTH)
+    ) dut (
+        .ctrl_clk         (ctrl_clk),
+        .dac_clk_in       (dac_clk_in),
+        .adc_clk_in       (adc_clk_in),
+
+        .rst_n            (rst_n),
+        .rst_soft         (rst_soft),
+
+        .finish           (finish),
+
+        .cfg_bus_input    (cfg_bus_input),
+        .cfg_bus_valid    (cfg_bus_valid),
+
+        .start            (start),
+
+        .busy             (busy),
+
+        .dac_pulse_width  (dac_pulse_width),
+        .dac_pulse_period (dac_pulse_period),
+        .dac_pulse_height (dac_pulse_height),
+        .dac_pulse_num    (dac_pulse_num),
+
+        .adc_pulse_period (adc_pulse_period),
+        .adc_pulse_num    (adc_pulse_num),
+        .adc_window_size  (adc_window_size),
+
+        .dac_start        (dac_start),
+        .adc_start        (adc_start),
+        .dac_rst          (dac_rst),
+        .adc_rst          (adc_rst)
+    );
+
+    //------------------------------------------------------------
+    // pulse counters and monitors for testing
+    //------------------------------------------------------------
+
+    int dac_rst_count;
+    int adc_rst_count;
+    int dac_start_count;
+    int adc_start_count;
+
+    always_ff @(posedge dac_clk_in) begin
+        if (!rst_n) begin
+            dac_rst_count   <= 0;
+            dac_start_count <= 0;
+        end
+        else begin
+            if (dac_rst)
+                dac_rst_count <= dac_rst_count + 1;
+
+            if (dac_start)
+                dac_start_count <= dac_start_count + 1;
+        end
+    end
+
+    always_ff @(posedge adc_clk_in) begin
+        if (!rst_n) begin
+            adc_rst_count   <= 0;
+            adc_start_count <= 0;
+        end
+        else begin
+            if (adc_rst)
+                adc_rst_count <= adc_rst_count + 1;
+
+            if (adc_start)
+                adc_start_count <= adc_start_count + 1;
+        end
+    end
+
+    //------------------------------------------------------------
+    // helpers
+    //------------------------------------------------------------
+
+    task automatic send_cmd(input logic [7:0] cmd);
+    begin
+        @(negedge ctrl_clk);
+
+        case (cmd)
+
+            8'h0F: begin
+                rst_soft <= 1'b1;
+
+                @(posedge ctrl_clk);
+
+                rst_soft <= 1'b0;
+            end
+
+            8'hF0: begin
+                start <= 1'b1;
+
+                @(posedge ctrl_clk);
+
+                start <= 1'b0;
+            end
+
+            default:
+                $fatal(1, "Unsupported command %h", cmd);
+
+        endcase
+    end
+    endtask
+
+    task automatic send_set_data(
+    input logic [31:0] pulse_width,
+    input logic [31:0] pulse_period,
+    input logic [15:0] pulse_num,
+    input logic [15:0] pulse_height_raw,
+    input logic [31:0] pulse_period_adc,
+    input logic [31:0] window_size
+);
+
+logic [159:0] payload;
+
+begin
+
+    payload = {
+        window_size,
+        pulse_period_adc,
+        pulse_height_raw,
+        pulse_num,
+        pulse_period,
+        pulse_width
+    };
+
+    @(negedge ctrl_clk);
+
+    cfg_bus_input <= payload;
+    cfg_bus_valid <= 1'b1;
+
+    @(posedge ctrl_clk);
+
+    cfg_bus_valid <= 1'b0;
+    cfg_bus_input <= '0;
+
+end
+endtask
+
+    task automatic pulse_finish;
+        begin
+            @(posedge adc_clk_in);
+            finish <= 1'b1;
+
+            @(posedge adc_clk_in);
+            finish <= 1'b0;
+        end
+    endtask
+
+    //------------------------------------------------------------
+    // waiters
+    //------------------------------------------------------------
+
+    task automatic wait_dac_rst_count(input int expected, input int max_cycles = 100);
+        int i;
+        begin
+            for (i = 0; i < max_cycles; i++) begin
+                @(posedge dac_clk_in);
+
+                if (dac_rst_count >= expected)
+                    return;
+            end
+
+            $fatal(1,
+                "Timeout waiting for dac_rst_count >= %0d, current=%0d",
+                expected,
+                dac_rst_count
+            );
+        end
+    endtask
+
+    task automatic wait_adc_rst_count(input int expected, input int max_cycles = 100);
+        int i;
+        begin
+            for (i = 0; i < max_cycles; i++) begin
+                @(posedge adc_clk_in);
+
+                if (adc_rst_count >= expected)
+                    return;
+            end
+
+            $fatal(1,
+                "Timeout waiting for adc_rst_count >= %0d, current=%0d",
+                expected,
+                adc_rst_count
+            );
+        end
+    endtask
+
+    task automatic wait_dac_start_count(input int expected, input int max_cycles = 100);
+        int i;
+        begin
+            for (i = 0; i < max_cycles; i++) begin
+                @(posedge dac_clk_in);
+
+                if (dac_start_count >= expected)
+                    return;
+            end
+
+            $fatal(1,
+                "Timeout waiting for dac_start_count >= %0d, current=%0d",
+                expected,
+                dac_start_count
+            );
+        end
+    endtask
+
+    task automatic wait_adc_start_count(input int expected, input int max_cycles = 100);
+        int i;
+        begin
+            for (i = 0; i < max_cycles; i++) begin
+                @(posedge adc_clk_in);
+
+                if (adc_start_count >= expected)
+                    return;
+            end
+
+            $fatal(1,
+                "Timeout waiting for adc_start_count >= %0d, current=%0d",
+                expected,
+                adc_start_count
+            );
+        end
+    endtask
+
+    task automatic wait_cfg_applied(
+
+    input logic [31:0] exp_pulse_width,
+    input logic [31:0] exp_pulse_period,
+    input logic [15:0] exp_pulse_num,
+    input logic [15:0] exp_pulse_height_raw,
+    input logic [31:0] exp_pulse_period_adc,
+    input logic [31:0] exp_window_size,
+    input int max_cycles = 200
+);
+
+logic [DAC_DATA_WIDTH-1:0] exp_height;
+
+int i;
+
+begin
+
+    exp_height = exp_pulse_height_raw[DAC_DATA_WIDTH-1:0];
+
+    for(i=0;i<max_cycles;i++) begin
+
+        @(posedge ctrl_clk);
+
+        if(
+
+            dac_pulse_width  == exp_pulse_width &&
+            dac_pulse_period == exp_pulse_period &&
+            dac_pulse_num    == exp_pulse_num &&
+            dac_pulse_height == exp_height &&
+
+            adc_pulse_period == exp_pulse_period_adc &&
+            adc_pulse_num    == exp_pulse_num &&
+            adc_window_size  == exp_window_size
+
+        )
+            return;
+
+    end
+
+    $fatal("Configuration timeout");
+
+end
+endtask
+    
+        //------------------------------------------------------------
+    // Test sequence
+    //------------------------------------------------------------
+
+    logic [31:0] test_pulse_width;
+    logic [31:0] test_pulse_period;
+    logic [15:0] test_pulse_num;
+    logic [15:0] test_pulse_height_raw;
+    logic [31:0] test_pulse_period_adc;
+    logic [31:0] test_window_size;
+
+    initial begin
+        // defaults
+        rst_n         = 1'b0;
+        rst_soft      = 1'b0;
+
+        start         = 1'b0;
+        finish        = 1'b0;
+
+        cfg_bus_input = '0;
+        cfg_bus_valid = 1'b0;
+
+        test_pulse_width      = 32'h11223344;
+        test_pulse_period     = 32'h55667788;
+        test_pulse_num        = 16'hA1B2;
+        test_pulse_height_raw = 16'h0CDE; // for DAC_DATA_WIDTH=12 => 12'hCDE
+        test_pulse_period_adc = 32'h50607080;
+        test_window_size      = 32'hABCDEF55;
+
+        repeat (10) @(posedge ctrl_clk);
+        rst_n = 1'b1;
+
+        repeat (10) @(posedge ctrl_clk);
+
+        //--------------------------------------------------------
+        // TEST 1: soft_reset
+        //--------------------------------------------------------
+
+        $display("[%0t] TEST 1: soft_reset", $time);
+
+        send_cmd(8'h0F);
+
+        wait_dac_rst_count(1);
+        wait_adc_rst_count(1);
+
+        if (dac_rst_count != 1) begin
+            $fatal(1,
+                "Expected exactly one dac_rst pulse after first soft_reset, got %0d",
+                dac_rst_count
+            );
+        end
+
+        if (adc_rst_count != 1) begin
+            $fatal(1,
+                "Expected exactly one adc_rst pulse after first soft_reset, got %0d",
+                adc_rst_count
+            );
+        end
+
+        $display("[%0t] TEST 1 passed", $time);
+
+        //--------------------------------------------------------
+        // TEST 2: set_data
+        //--------------------------------------------------------
+
+        $display("[%0t] TEST 2: set_data", $time);
+
+        send_set_data(
+
+    test_pulse_width,
+    test_pulse_period,
+    test_pulse_num,
+    test_pulse_height_raw,
+    test_pulse_period_adc,
+    test_window_size
+
+);
+
+        wait_cfg_applied(
+
+    test_pulse_width,
+    test_pulse_period,
+    test_pulse_num,
+    test_pulse_height_raw,
+    test_pulse_period_adc,
+    test_window_size
+
+);
+
+        if (dac_pulse_width !== 32'h11223344) begin
+            $fatal(1,
+                "dac_pulse_width mismatch: got %h expected %h",
+                dac_pulse_width,
+                32'h11223344
+            );
+        end
+
+        if (dac_pulse_period !== 32'h55667788) begin
+            $fatal(1,
+                "dac_pulse_period mismatch: got %h expected %h",
+                dac_pulse_period,
+                32'h55667788
+            );
+        end
+
+        if (dac_pulse_num !== 16'hA1B2) begin
+            $fatal(1,
+                "dac_pulse_num mismatch: got %h expected %h",
+                dac_pulse_num,
+                16'hA1B2
+            );
+        end
+
+        if (dac_pulse_height !== 12'hCDE) begin
+            $fatal(1,
+                "dac_pulse_height mismatch: got %h expected %h",
+                dac_pulse_height,
+                12'hCDE
+            );
+        end
+
+        if (adc_pulse_period !== 32'h50607080) begin
+            $fatal(1,
+                "adc_pulse_period mismatch: got %h expected %h",
+                adc_pulse_period,
+                32'h50607080
+            );
+        end
+
+        if (adc_pulse_num !== 16'hA1B2) begin
+            $fatal(1,
+                "adc_pulse_num mismatch: got %h expected %h",
+                adc_pulse_num,
+                16'hA1B2
+            );
+        end
+        
+        if(adc_window_size != test_window_size)
+
+    $fatal(
+        "adc_window_size mismatch. got=%h expected=%h",
+        adc_window_size,
+        test_window_size
+    );
+
+        $display("[%0t] TEST 2 passed", $time);
+
+        repeat (20) @(posedge ctrl_clk);
+
+        //--------------------------------------------------------
+        // TEST 3: start
+        //--------------------------------------------------------
+
+        $display("[%0t] TEST 3: start", $time);
+
+        send_cmd(8'hF0);
+
+        wait_dac_start_count(1);
+        wait_adc_start_count(1);
+
+        if (dac_start_count != 1) begin
+            $fatal(1,
+                "Expected exactly one dac_start pulse after first start, got %0d",
+                dac_start_count
+            );
+        end
+
+        if (adc_start_count != 1) begin
+            $fatal(1,
+                "Expected exactly one adc_start pulse after first start, got %0d",
+                adc_start_count
+            );
+        end
+
+        if (!busy) begin
+            $fatal(1,
+                "busy must be asserted after start"
+            );
+        end
+
+        $display("[%0t] TEST 3 start pulses passed", $time);
+
+        //--------------------------------------------------------
+        // release busy by finish pulse from ADC domain
+        //--------------------------------------------------------
+
+        $display("[%0t] Sending finish pulse", $time);
+
+        pulse_finish();
+
+        repeat (20) @(posedge ctrl_clk);
+
+        if (busy) begin
+            $fatal(1,
+                "busy was not cleared after finish pulse"
+            );
+        end
+
+        //--------------------------------------------------------
+        // sanity check that commands are accepted again after finish
+        //--------------------------------------------------------
+
+        $display("[%0t] TEST 4: soft_reset after finish", $time);
+
+        send_cmd(8'h0F);
+
+        wait_dac_rst_count(2);
+        wait_adc_rst_count(2);
+
+        if (dac_rst_count != 2) begin
+            $fatal(1,
+                "Expected exactly two dac_rst pulses total, got %0d",
+                dac_rst_count
+            );
+        end
+
+        if (adc_rst_count != 2) begin
+            $fatal(1,
+                "Expected exactly two adc_rst pulses total, got %0d",
+                adc_rst_count
+            );
+        end
+
+        $display("[%0t] TEST 4 passed", $time);
+
+        //--------------------------------------------------------
+
+        $display("==============================================");
+        $display("ALL BASIC TESTS PASSED");
+        $display("dac_rst_count   = %0d", dac_rst_count);
+        $display("adc_rst_count   = %0d", adc_rst_count);
+        $display("dac_start_count = %0d", dac_start_count);
+        $display("adc_start_count = %0d", adc_start_count);
+        $display("==============================================");
+
+        #50;
+        
+         //--------------------------------------------------------
+        // TEST 2.1: set_data
+        //--------------------------------------------------------
+
+        test_pulse_width      = 32'h12121212;
+        test_pulse_period     = 32'h34343434;
+        test_pulse_num        = 16'h1A2B;
+        test_pulse_height_raw = 16'hC0ED; // for DAC_DATA_WIDTH=12 => 12'hCDE
+        test_pulse_period_adc = 32'h56565656;
+        test_window_size      = 32'h01020304;
+        
+        $display("[%0t] TEST 2.1: set_data", $time);
+
+        send_set_data(
+            test_pulse_width,
+            test_pulse_period,
+            test_pulse_num,
+            test_pulse_height_raw,
+            test_pulse_period_adc,
+            test_window_size
+        );
+
+        wait_cfg_applied(
+            test_pulse_width,
+            test_pulse_period,
+            test_pulse_num,
+            test_pulse_height_raw,
+            test_pulse_period_adc,
+            test_window_size
+        );
+
+        if (dac_pulse_width !== 32'h12121212) begin
+            $fatal(1,
+                "dac_pulse_width mismatch: got %h expected %h",
+                dac_pulse_width,
+                32'h12121212
+            );
+        end
+
+        if (dac_pulse_period !== 32'h34343434) begin
+            $fatal(1,
+                "dac_pulse_period mismatch: got %h expected %h",
+                dac_pulse_period,
+                32'h34343434
+            );
+        end
+
+        if (dac_pulse_num !== 16'h1A2B) begin
+            $fatal(1,
+                "dac_pulse_num mismatch: got %h expected %h",
+                dac_pulse_num,
+                16'h1A2B
+            );
+        end
+
+        if (dac_pulse_height !== 12'hC0ED) begin
+            $fatal(1,
+                "dac_pulse_height mismatch: got %h expected %h",
+                dac_pulse_height,
+                12'hC0ED
+            );
+        end
+
+        if (adc_pulse_period !== 32'h56565656) begin
+            $fatal(1,
+                "adc_pulse_period mismatch: got %h expected %h",
+                adc_pulse_period,
+                32'h56565656
+            );
+        end
+
+        $display("[%0t] TEST 2.1 passed", $time);
+
+        repeat (20) @(posedge ctrl_clk);
+
+        //--------------------------------------------------------
+        // TEST 3.1: start
+        //--------------------------------------------------------
+
+        $display("[%0t] TEST 3.1: start", $time);
+
+        send_cmd(8'hF0);
+
+        wait_dac_start_count(2);
+        wait_adc_start_count(2);
+
+        if (dac_start_count != 2) begin
+            $fatal(1,
+                "Expected exactly one dac_start pulse after first start, got %0d",
+                dac_start_count
+            );
+        end
+
+        if (adc_start_count != 2) begin
+            $fatal(1,
+                "Expected exactly one adc_start pulse after first start, got %0d",
+                adc_start_count
+            );
+        end
+
+        if (!busy) begin
+            $fatal(1,
+                "busy must be asserted after start"
+            );
+        end
+
+        $display("[%0t] TEST 3.1 start pulses passed", $time);
+
+        //--------------------------------------------------------
+        // release busy by finish pulse from ADC domain
+        //--------------------------------------------------------
+
+        $display("[%0t] Sending finish pulse", $time);
+
+        pulse_finish();
+
+        repeat (20) @(posedge ctrl_clk);
+
+        if (busy) begin
+            $fatal(1,
+                "busy was not cleared after finish pulse"
+            );
+        end
+
+        //--------------------------------------------------------
+        // sanity check that commands are accepted again after finish
+        //--------------------------------------------------------
+
+        $display("[%0t] TEST 4.1: soft_reset after finish", $time);
+
+        send_cmd(8'h0F);
+
+        wait_dac_rst_count(2);
+        wait_adc_rst_count(2);
+
+        if (dac_rst_count != 2) begin
+            $fatal(1,
+                "Expected exactly two dac_rst pulses total, got %0d",
+                dac_rst_count
+            );
+        end
+
+        if (adc_rst_count != 2) begin
+            $fatal(1,
+                "Expected exactly two adc_rst pulses total, got %0d",
+                adc_rst_count
+            );
+        end
+
+        $display("[%0t] TEST 4.1 passed", $time);
+
+        //--------------------------------------------------------
+
+        $display("==============================================");
+        $display("ALL BASIC TESTS PASSED");
+        $display("dac_rst_count   = %0d", dac_rst_count);
+        $display("adc_rst_count   = %0d", adc_rst_count);
+        $display("dac_start_count = %0d", dac_start_count);
+        $display("adc_start_count = %0d", adc_start_count);
+        $display("==============================================");
+        $finish;
+
+    end
+
+endmodule

rtl/controller/tests/tb_control_behav.wcfg

@@ -0,0 +1,236 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<wave_config>
+   <wave_state>
+   </wave_state>
+   <db_ref_list>
+      <db_ref path="tb_control_behav.wdb" id="1">
+         <top_modules>
+            <top_module name="glbl" />
+            <top_module name="tb_control" />
+         </top_modules>
+      </db_ref>
+   </db_ref_list>
+   <zoom_setting>
+      <ZoomStartTime time="160.614 ns"></ZoomStartTime>
+      <ZoomEndTime time="1,564.737 ns"></ZoomEndTime>
+      <Cursor1Time time="1,330.716 ns"></Cursor1Time>
+   </zoom_setting>
+   <column_width_setting>
+      <NameColumnWidth column_width="479"></NameColumnWidth>
+      <ValueColumnWidth column_width="116"></ValueColumnWidth>
+   </column_width_setting>
+   <WVObjectSize size="34" />
+   <wvobject fp_name="/tb_control/dac_clk_in" type="logic">
+      <obj_property name="ElementShortName">dac_clk_in</obj_property>
+      <obj_property name="ObjectShortName">dac_clk_in</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/adc_clk_in" type="logic">
+      <obj_property name="ElementShortName">adc_clk_in</obj_property>
+      <obj_property name="ObjectShortName">adc_clk_in</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/rst_n" type="logic">
+      <obj_property name="ElementShortName">rst_n</obj_property>
+      <obj_property name="ObjectShortName">rst_n</obj_property>
+      <obj_property name="CustomSignalColor">#800080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/rst_soft" type="logic">
+      <obj_property name="ElementShortName">rst_soft</obj_property>
+      <obj_property name="ObjectShortName">rst_soft</obj_property>
+      <obj_property name="CustomSignalColor">#008080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/start" type="logic">
+      <obj_property name="ElementShortName">start</obj_property>
+      <obj_property name="ObjectShortName">start</obj_property>
+      <obj_property name="CustomSignalColor">#E0FFFF</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/adc_start_pulse" type="logic">
+      <obj_property name="ElementShortName">adc_start_pulse</obj_property>
+      <obj_property name="ObjectShortName">adc_start_pulse</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/dac_start_pulse" type="logic">
+      <obj_property name="ElementShortName">dac_start_pulse</obj_property>
+      <obj_property name="ObjectShortName">dac_start_pulse</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/busy" type="logic">
+      <obj_property name="ElementShortName">busy</obj_property>
+      <obj_property name="ObjectShortName">busy</obj_property>
+      <obj_property name="CustomSignalColor">#E0FFFF</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/finish" type="logic">
+      <obj_property name="ElementShortName">finish</obj_property>
+      <obj_property name="ObjectShortName">finish</obj_property>
+      <obj_property name="CustomSignalColor">#FAAFBE</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/finish_pulse" type="logic">
+      <obj_property name="ElementShortName">finish_pulse</obj_property>
+      <obj_property name="ObjectShortName">finish_pulse</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/cfg_bus_valid" type="logic">
+      <obj_property name="ElementShortName">cfg_bus_valid</obj_property>
+      <obj_property name="ObjectShortName">cfg_bus_valid</obj_property>
+      <obj_property name="CustomSignalColor">#FF0080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/cfg_bus_input" type="array">
+      <obj_property name="ElementShortName">cfg_bus_input[159:0]</obj_property>
+      <obj_property name="ObjectShortName">cfg_bus_input[159:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FF0080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dac_pulse_width" type="array">
+      <obj_property name="ElementShortName">dac_pulse_width[31:0]</obj_property>
+      <obj_property name="ObjectShortName">dac_pulse_width[31:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dac_pulse_period" type="array">
+      <obj_property name="ElementShortName">dac_pulse_period[31:0]</obj_property>
+      <obj_property name="ObjectShortName">dac_pulse_period[31:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dac_pulse_height" type="array">
+      <obj_property name="ElementShortName">dac_pulse_height[11:0]</obj_property>
+      <obj_property name="ObjectShortName">dac_pulse_height[11:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+      <obj_property name="Radix">HEXRADIX</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dac_pulse_num" type="array">
+      <obj_property name="ElementShortName">dac_pulse_num[15:0]</obj_property>
+      <obj_property name="ObjectShortName">dac_pulse_num[15:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/adc_pulse_period" type="array">
+      <obj_property name="ElementShortName">adc_pulse_period[31:0]</obj_property>
+      <obj_property name="ObjectShortName">adc_pulse_period[31:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/adc_pulse_num" type="array">
+      <obj_property name="ElementShortName">adc_pulse_num[15:0]</obj_property>
+      <obj_property name="ObjectShortName">adc_pulse_num[15:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/adc_window_size" type="array">
+      <obj_property name="ElementShortName">adc_window_size[31:0]</obj_property>
+      <obj_property name="ObjectShortName">adc_window_size[31:0]</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dac_start" type="logic">
+      <obj_property name="ElementShortName">dac_start</obj_property>
+      <obj_property name="ObjectShortName">dac_start</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/adc_start" type="logic">
+      <obj_property name="ElementShortName">adc_start</obj_property>
+      <obj_property name="ObjectShortName">adc_start</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dac_rst" type="logic">
+      <obj_property name="ElementShortName">dac_rst</obj_property>
+      <obj_property name="ObjectShortName">dac_rst</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/adc_rst" type="logic">
+      <obj_property name="ElementShortName">adc_rst</obj_property>
+      <obj_property name="ObjectShortName">adc_rst</obj_property>
+   </wvobject>
+   <wvobject fp_name="group499" type="group">
+      <obj_property name="label">tb signals</obj_property>
+      <obj_property name="DisplayName">label</obj_property>
+      <wvobject fp_name="/tb_control/dac_rst_count" type="array">
+         <obj_property name="ElementShortName">dac_rst_count[31:0]</obj_property>
+         <obj_property name="ObjectShortName">dac_rst_count[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject fp_name="/tb_control/adc_rst_count" type="array">
+         <obj_property name="ElementShortName">adc_rst_count[31:0]</obj_property>
+         <obj_property name="ObjectShortName">adc_rst_count[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject fp_name="/tb_control/dac_start_count" type="array">
+         <obj_property name="ElementShortName">dac_start_count[31:0]</obj_property>
+         <obj_property name="ObjectShortName">dac_start_count[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject fp_name="/tb_control/adc_start_count" type="array">
+         <obj_property name="ElementShortName">adc_start_count[31:0]</obj_property>
+         <obj_property name="ObjectShortName">adc_start_count[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_req_toggle_adc" type="logic">
+      <obj_property name="ElementShortName">cfg_req_toggle_adc</obj_property>
+      <obj_property name="ObjectShortName">cfg_req_toggle_adc</obj_property>
+      <obj_property name="CustomSignalColor">#FFFF00</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_req_toggle_dac" type="logic">
+      <obj_property name="ElementShortName">cfg_req_toggle_dac</obj_property>
+      <obj_property name="ObjectShortName">cfg_req_toggle_dac</obj_property>
+      <obj_property name="CustomSignalColor">#FFFF00</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_ack_toggle_adc" type="logic">
+      <obj_property name="ElementShortName">cfg_ack_toggle_adc</obj_property>
+      <obj_property name="ObjectShortName">cfg_ack_toggle_adc</obj_property>
+      <obj_property name="CustomSignalColor">#FF00FF</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_ack_toggle_dac" type="logic">
+      <obj_property name="ElementShortName">cfg_ack_toggle_dac</obj_property>
+      <obj_property name="ObjectShortName">cfg_ack_toggle_dac</obj_property>
+      <obj_property name="CustomSignalColor">#FF00FF</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_wait_adc_ack" type="logic">
+      <obj_property name="ElementShortName">cfg_wait_adc_ack</obj_property>
+      <obj_property name="ObjectShortName">cfg_wait_adc_ack</obj_property>
+      <obj_property name="CustomSignalColor">#0000FF</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_wait_dac_ack" type="logic">
+      <obj_property name="ElementShortName">cfg_wait_dac_ack</obj_property>
+      <obj_property name="ObjectShortName">cfg_wait_dac_ack</obj_property>
+      <obj_property name="CustomSignalColor">#0000FF</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_req_pulse_adc" type="logic">
+      <obj_property name="ElementShortName">cfg_req_pulse_adc</obj_property>
+      <obj_property name="ObjectShortName">cfg_req_pulse_adc</obj_property>
+      <obj_property name="CustomSignalColor">#808000</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_req_pulse_dac" type="logic">
+      <obj_property name="ElementShortName">cfg_req_pulse_dac</obj_property>
+      <obj_property name="ObjectShortName">cfg_req_pulse_dac</obj_property>
+      <obj_property name="CustomSignalColor">#808000</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_ack_pulse_adc" type="logic">
+      <obj_property name="ElementShortName">cfg_ack_pulse_adc</obj_property>
+      <obj_property name="ObjectShortName">cfg_ack_pulse_adc</obj_property>
+      <obj_property name="CustomSignalColor">#DCDCDC</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject fp_name="/tb_control/dut/cfg_ack_pulse_dac" type="logic">
+      <obj_property name="ElementShortName">cfg_ack_pulse_dac</obj_property>
+      <obj_property name="ObjectShortName">cfg_ack_pulse_dac</obj_property>
+      <obj_property name="CustomSignalColor">#DCDCDC</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+</wave_config>

rtl/controller/tests/tb_controller_wrapper_axil.sv

@@ -0,0 +1,338 @@
+module tb_controller_wrapper_axil #(
+  parameter int unsigned ADDR_W             = 16,
+  parameter int unsigned DATA_W             = 32,
+  parameter int unsigned USER_W             = 1,
+
+  parameter int unsigned DAC_DATA_WIDTH     = 12,
+
+  parameter int unsigned AXI_ADDR_WIDTH     = 16,
+  parameter int unsigned AXIS_ID_WIDTH      = 8,
+  parameter int unsigned LEN_WIDTH          = 20,
+  parameter int unsigned AXIS_USER_WIDTH    = 1,
+  parameter int unsigned AXIS_DEST_WIDTH    = 8,
+  parameter int unsigned TAG_WIDTH          = 8,
+
+  parameter int unsigned READ_DESC_WIDTH    = AXI_ADDR_WIDTH + LEN_WIDTH + TAG_WIDTH + AXIS_ID_WIDTH + AXIS_DEST_WIDTH + AXIS_USER_WIDTH,
+  parameter int unsigned WRITE_DESC_WIDTH   = AXI_ADDR_WIDTH + LEN_WIDTH + TAG_WIDTH,
+
+  parameter int unsigned READ_STATUS_WIDTH  = TAG_WIDTH + 4,
+  parameter int unsigned WRITE_STATUS_WIDTH = LEN_WIDTH + TAG_WIDTH + AXIS_ID_WIDTH + AXIS_DEST_WIDTH + AXIS_USER_WIDTH + 4,
+
+  // ceil(width / 8), чтобы keep/strb не стали слишком узкими для нестандартных ширин типа 12/49/61.
+  parameter int unsigned READ_DESC_KEEP_W     = (READ_DESC_WIDTH + 7) / 8,
+  parameter int unsigned WRITE_DESC_KEEP_W    = (WRITE_DESC_WIDTH + 7) / 8,
+  parameter int unsigned READ_STATUS_KEEP_W   = (READ_STATUS_WIDTH + 7) / 8,
+  parameter int unsigned WRITE_STATUS_KEEP_W  = (WRITE_STATUS_WIDTH + 7) / 8
+)(
+  input  logic                 ctrl_clk,
+  input  logic                 rst,
+
+  input  logic [ADDR_W-1:0]   s_axil_awaddr,
+  input  logic [2:0]          s_axil_awprot,
+  input  logic                s_axil_awvalid,
+  output logic                s_axil_awready,
+
+  input  logic [DATA_W-1:0]   s_axil_wdata,
+  input  logic [DATA_W/8-1:0] s_axil_wstrb,
+  input  logic                s_axil_wvalid,
+  output logic                s_axil_wready,
+
+  output logic [1:0]          s_axil_bresp,
+  output logic                s_axil_bvalid,
+  input  logic                s_axil_bready,
+
+  input  logic [ADDR_W-1:0]   s_axil_araddr,
+  input  logic [2:0]          s_axil_arprot,
+  input  logic                s_axil_arvalid,
+  output logic                s_axil_arready,
+
+  output logic [DATA_W-1:0]   s_axil_rdata,
+  output logic [1:0]          s_axil_rresp,
+  output logic                s_axil_rvalid,
+  input  logic                s_axil_rready,
+
+  // ---------------------------------------------------------------------------
+  // Минимальный flat-view для DMA AXIS портов.
+  // Наружу оставлены только tdata/tvalid/tready в старом стиле.
+  // Все остальные AXIS поля внутри обёртки завязаны на безопасные значения.
+  // ---------------------------------------------------------------------------
+
+  // DUT master -> testbench: descriptor commands.
+  output logic [READ_DESC_WIDTH-1:0]   desc_read_cmd_out,
+  output logic                         valid_desc_read,
+  input  logic                         ready_desc_read,
+
+  output logic [WRITE_DESC_WIDTH-1:0]  desc_write_cmd_out,
+  output logic                         valid_desc_write,
+  input  logic                         ready_desc_write,
+
+  // testbench -> DUT slave: status commands.
+  input  logic [READ_STATUS_WIDTH-1:0] status_read_cmd_in,
+  input  logic                         valid_status_read,
+  output logic                         ready_status_read,
+
+  input  logic [WRITE_STATUS_WIDTH-1:0] status_write_cmd_in,
+  input  logic                          valid_status_write,
+  output logic                          ready_status_write
+);
+
+  logic rst_n;
+  assign rst_n = ~rst;
+
+  // Для минимального теста держим все clock domain-ы на одном clock.
+  logic dac_clk_in;
+  logic adc_clk_in;
+  assign dac_clk_in = ctrl_clk;
+  assign adc_clk_in = ctrl_clk;
+
+  logic finish;
+  assign finish = 1'b0;
+
+  // ---------------------------------------------------------------------------
+  // AXI-Lite flat -> axi4l_if
+  // ---------------------------------------------------------------------------
+
+  axi4l_if #(
+    .ADDR_W(ADDR_W),
+    .DATA_W(DATA_W),
+    .USER_W(USER_W)
+  ) axil_bus (
+    .aclk(ctrl_clk),
+    .aresetn(rst_n)
+  );
+
+  axi4l_flat_to_if #(
+    .ADDR_W(ADDR_W),
+    .DATA_W(DATA_W),
+    .USER_W(USER_W)
+  ) u_axil_flat_to_if (
+    .s_axil_awaddr (s_axil_awaddr),
+    .s_axil_awprot (s_axil_awprot),
+    .s_axil_awvalid(s_axil_awvalid),
+    .s_axil_awready(s_axil_awready),
+
+    .s_axil_wdata  (s_axil_wdata),
+    .s_axil_wstrb  (s_axil_wstrb),
+    .s_axil_wvalid (s_axil_wvalid),
+    .s_axil_wready (s_axil_wready),
+
+    .s_axil_bresp  (s_axil_bresp),
+    .s_axil_bvalid (s_axil_bvalid),
+    .s_axil_bready (s_axil_bready),
+
+    .s_axil_araddr (s_axil_araddr),
+    .s_axil_arprot (s_axil_arprot),
+    .s_axil_arvalid(s_axil_arvalid),
+    .s_axil_arready(s_axil_arready),
+
+    .s_axil_rdata  (s_axil_rdata),
+    .s_axil_rresp  (s_axil_rresp),
+    .s_axil_rvalid (s_axil_rvalid),
+    .s_axil_rready (s_axil_rready),
+
+    .m_axil(axil_bus)
+  );
+
+  // ---------------------------------------------------------------------------
+  // AXIS interfaces for the updated controller_wrapper_axil
+  // ---------------------------------------------------------------------------
+
+  axis_if #(
+    .DATA_W(READ_STATUS_WIDTH),
+    .KEEP_W(READ_STATUS_KEEP_W),
+    .ID_W(AXIS_ID_WIDTH),
+    .DEST_W(AXIS_DEST_WIDTH),
+    .USER_W(AXIS_USER_WIDTH)
+  ) axis_status_read (
+    .aclk(ctrl_clk),
+    .aresetn(rst_n)
+  );
+
+  axis_if #(
+    .DATA_W(WRITE_STATUS_WIDTH),
+    .KEEP_W(WRITE_STATUS_KEEP_W),
+    .ID_W(AXIS_ID_WIDTH),
+    .DEST_W(AXIS_DEST_WIDTH),
+    .USER_W(AXIS_USER_WIDTH)
+  ) axis_status_write (
+    .aclk(ctrl_clk),
+    .aresetn(rst_n)
+  );
+
+  axis_if #(
+    .DATA_W(READ_DESC_WIDTH),
+    .KEEP_W(READ_DESC_KEEP_W),
+    .ID_W(AXIS_ID_WIDTH),
+    .DEST_W(AXIS_DEST_WIDTH),
+    .USER_W(AXIS_USER_WIDTH)
+  ) axis_desc_read (
+    .aclk(ctrl_clk),
+    .aresetn(rst_n)
+  );
+
+  axis_if #(
+    .DATA_W(WRITE_DESC_WIDTH),
+    .KEEP_W(WRITE_DESC_KEEP_W),
+    .ID_W(AXIS_ID_WIDTH),
+    .DEST_W(AXIS_DEST_WIDTH),
+    .USER_W(AXIS_USER_WIDTH)
+  ) axis_desc_write (
+    .aclk(ctrl_clk),
+    .aresetn(rst_n)
+  );
+
+  // testbench flat status -> DUT AXIS slave ports
+  axis_flat_to_if #(
+    .DATA_W(READ_STATUS_WIDTH),
+    .KEEP_W(READ_STATUS_KEEP_W),
+    .ID_W(AXIS_ID_WIDTH),
+    .DEST_W(AXIS_DEST_WIDTH),
+    .USER_W(AXIS_USER_WIDTH)
+  ) u_status_read_flat_to_if (
+    .s_axis_tdata (status_read_cmd_in),
+    .s_axis_tkeep ({READ_STATUS_KEEP_W{1'b1}}),
+    .s_axis_tstrb ({READ_STATUS_KEEP_W{1'b1}}),
+    .s_axis_tlast (1'b1),
+    .s_axis_tid   ('0),
+    .s_axis_tdest ('0),
+    .s_axis_tuser ('0),
+    .s_axis_tvalid(valid_status_read),
+    .s_axis_tready(ready_status_read),
+
+    .m_axis(axis_status_read)
+  );
+
+  axis_flat_to_if #(
+    .DATA_W(WRITE_STATUS_WIDTH),
+    .KEEP_W(WRITE_STATUS_KEEP_W),
+    .ID_W(AXIS_ID_WIDTH),
+    .DEST_W(AXIS_DEST_WIDTH),
+    .USER_W(AXIS_USER_WIDTH)
+  ) u_status_write_flat_to_if (
+    .s_axis_tdata (status_write_cmd_in),
+    .s_axis_tkeep ({WRITE_STATUS_KEEP_W{1'b1}}),
+    .s_axis_tstrb ({WRITE_STATUS_KEEP_W{1'b1}}),
+    .s_axis_tlast (1'b1),
+    .s_axis_tid   ('0),
+    .s_axis_tdest ('0),
+    .s_axis_tuser ('0),
+    .s_axis_tvalid(valid_status_write),
+    .s_axis_tready(ready_status_write),
+
+    .m_axis(axis_status_write)
+  );
+
+  // DUT AXIS master ports -> testbench flat descriptor outputs
+  logic [READ_DESC_KEEP_W-1:0]     unused_desc_read_tkeep;
+  logic [READ_DESC_KEEP_W-1:0]     unused_desc_read_tstrb;
+  logic                            unused_desc_read_tlast;
+  logic [AXIS_ID_WIDTH-1:0]        unused_desc_read_tid;
+  logic [AXIS_DEST_WIDTH-1:0]      unused_desc_read_tdest;
+  logic [AXIS_USER_WIDTH-1:0]      unused_desc_read_tuser;
+
+  axis_if_to_flat #(
+    .DATA_W(READ_DESC_WIDTH),
+    .KEEP_W(READ_DESC_KEEP_W),
+    .ID_W(AXIS_ID_WIDTH),
+    .DEST_W(AXIS_DEST_WIDTH),
+    .USER_W(AXIS_USER_WIDTH)
+  ) u_desc_read_if_to_flat (
+    .s_axis(axis_desc_read),
+
+    .m_axis_tdata (desc_read_cmd_out),
+    .m_axis_tkeep (unused_desc_read_tkeep),
+    .m_axis_tstrb (unused_desc_read_tstrb),
+    .m_axis_tlast (unused_desc_read_tlast),
+    .m_axis_tid   (unused_desc_read_tid),
+    .m_axis_tdest (unused_desc_read_tdest),
+    .m_axis_tuser (unused_desc_read_tuser),
+    .m_axis_tvalid(valid_desc_read),
+    .m_axis_tready(ready_desc_read)
+  );
+
+  logic [WRITE_DESC_KEEP_W-1:0]    unused_desc_write_tkeep;
+  logic [WRITE_DESC_KEEP_W-1:0]    unused_desc_write_tstrb;
+  logic                            unused_desc_write_tlast;
+  logic [AXIS_ID_WIDTH-1:0]        unused_desc_write_tid;
+  logic [AXIS_DEST_WIDTH-1:0]      unused_desc_write_tdest;
+  logic [AXIS_USER_WIDTH-1:0]      unused_desc_write_tuser;
+
+  axis_if_to_flat #(
+    .DATA_W(WRITE_DESC_WIDTH),
+    .KEEP_W(WRITE_DESC_KEEP_W),
+    .ID_W(AXIS_ID_WIDTH),
+    .DEST_W(AXIS_DEST_WIDTH),
+    .USER_W(AXIS_USER_WIDTH)
+  ) u_desc_write_if_to_flat (
+    .s_axis(axis_desc_write),
+
+    .m_axis_tdata (desc_write_cmd_out),
+    .m_axis_tkeep (unused_desc_write_tkeep),
+    .m_axis_tstrb (unused_desc_write_tstrb),
+    .m_axis_tlast (unused_desc_write_tlast),
+    .m_axis_tid   (unused_desc_write_tid),
+    .m_axis_tdest (unused_desc_write_tdest),
+    .m_axis_tuser (unused_desc_write_tuser),
+    .m_axis_tvalid(valid_desc_write),
+    .m_axis_tready(ready_desc_write)
+  );
+
+  // Controller ADC/DAC outputs.
+  logic [31:0]               adc_window_size;
+  logic [31:0]               dac_pulse_width;
+  logic [31:0]               dac_pulse_period;
+  logic [DAC_DATA_WIDTH-1:0] dac_pulse_height;
+  logic [15:0]               dac_pulse_num;
+  logic [31:0]               adc_pulse_period;
+  logic [15:0]               adc_pulse_num;
+  logic                      dac_start;
+  logic                      adc_start;
+  logic                      dac_rst;
+  logic                      adc_rst;
+
+  controller_wrapper_axil #(
+    .ADDR_W(ADDR_W),
+    .DATA_W(DATA_W),
+    .USER_W(USER_W),
+    .DAC_DATA_WIDTH(DAC_DATA_WIDTH),
+    .AXI_ADDR_WIDTH(AXI_ADDR_WIDTH),
+    .AXIS_ID_WIDTH(AXIS_ID_WIDTH),
+    .LEN_WIDTH(LEN_WIDTH),
+    .AXIS_USER_WIDTH(AXIS_USER_WIDTH),
+    .AXIS_DEST_WIDTH(AXIS_DEST_WIDTH),
+    .TAG_WIDTH(TAG_WIDTH),
+    .READ_DESC_WIDTH(READ_DESC_WIDTH),
+    .WRITE_DESC_WIDTH(WRITE_DESC_WIDTH),
+    .READ_STATUS_WIDTH(READ_STATUS_WIDTH),
+    .WRITE_STATUS_WIDTH(WRITE_STATUS_WIDTH)
+  ) dut (
+    .ctrl_clk(ctrl_clk),
+    .dac_clk_in(dac_clk_in),
+    .adc_clk_in(adc_clk_in),
+    .rst_n(rst_n),
+    .s_axil(axil_bus),
+
+    .finish(finish),
+    .adc_window_size(adc_window_size),
+
+    .dac_pulse_width(dac_pulse_width),
+    .dac_pulse_period(dac_pulse_period),
+    .dac_pulse_height(dac_pulse_height),
+    .dac_pulse_num(dac_pulse_num),
+
+    .adc_pulse_period(adc_pulse_period),
+    .adc_pulse_num(adc_pulse_num),
+
+    .dac_start(dac_start),
+    .adc_start(adc_start),
+    .dac_rst(dac_rst),
+    .adc_rst(adc_rst),
+
+    .s_axis_status_read(axis_status_read),
+    .s_axis_status_write(axis_status_write),
+
+    .m_axis_desc_read(axis_desc_read),
+    .m_axis_desc_write(axis_desc_write)
+  );
+
+endmodule : tb_controller_wrapper_axil

rtl/controller/tests/test_controller.py

@@ -0,0 +1,170 @@
+import cocotb
+from cocotb.clock import Clock
+from cocotb.handle import Immediate
+from cocotb.triggers import RisingEdge
+from cocotbext.axi import AxiLiteBus, AxiLiteMaster
+
+
+# Register indexes from axi4l_reg_map_controller_pkg.sv
+REG_CONTROL = 0
+REG_STATUS = 1
+REG_DAC_WIDTH = 2
+REG_DAC_PERIOD = 3
+REG_DAC_PULSE_NUM = 4
+REG_DAC_PULSE_HEIGHT = 5
+REG_ADC_PERIOD = 6
+REG_WINDOW_SIZE = 7
+REG_ERROR = 8
+REG_DESC_READ_ADDR = 9
+REG_DESC_READ_LEN = 10
+REG_DESC_READ_CONFIG = 11
+REG_READ_STATUS = 12
+REG_DESC_WRITE_ADDR = 13
+REG_DESC_WRITE_LEN_AND_TAG = 14
+REG_STATUS_WRITE_LEN = 15
+REG_STATUS_WRITE_CONFIG = 16
+
+
+# REG_CONTROL pulse bits
+CTRL_START = 0
+CTRL_RST_SOFT = 1
+CTRL_CFG_BUS_VALID = 2
+CTRL_SEND_DESC_READ = 3
+CTRL_SEND_DESC_WRITE = 4
+CTRL_TAKE_STATUS_READ = 5
+CTRL_TAKE_STATUS_WRITE = 6
+
+
+def reg_addr(reg_index: int) -> int:
+    # AXI-Lite uses byte addresses, 32-bit registers are spaced by 4 bytes.
+    return reg_index * 4
+
+
+def u32(value: int) -> bytes:
+    return int(value & 0xFFFFFFFF).to_bytes(4, "little")
+
+
+class TB:
+    def __init__(self, dut):
+        self.dut = dut
+
+        cocotb.start_soon(Clock(dut.ctrl_clk, 10, units="ns").start())
+
+        self.axil = AxiLiteMaster(
+            AxiLiteBus.from_prefix(dut, "s_axil"),
+            dut.ctrl_clk,
+            dut.rst,
+        )
+
+    async def reset(self):
+        self.dut.rst.value = 1
+        for _ in range(5):
+            await RisingEdge(self.dut.ctrl_clk)
+
+        self.dut.rst.value = 0
+        for _ in range(5):
+            await RisingEdge(self.dut.ctrl_clk)
+
+    async def write_reg(self, reg_index: int, value: int):
+        await self.axil.write(reg_addr(reg_index), u32(value))
+
+    async def read_reg(self, reg_index: int) -> int:
+        resp = await self.axil.read(reg_addr(reg_index), 4)
+        return int.from_bytes(bytes(resp.data), "little")
+
+
+@cocotb.test()
+async def simple_axil_write_read(dut):
+    tb = TB(dut)
+    await tb.reset()
+
+    await tb.write_reg(REG_DAC_WIDTH, 0x0000_0123)
+
+    value = await tb.read_reg(REG_DAC_WIDTH)
+    assert value == 0x0000_0123
+
+
+@cocotb.test()
+async def simple_controller_config_write(dut):
+    tb = TB(dut)
+    await tb.reset()
+
+    await tb.write_reg(REG_DAC_WIDTH, 0x10)
+    await tb.write_reg(REG_DAC_PERIOD, 0x40)
+    await tb.write_reg(REG_DAC_PULSE_NUM, 3)
+    await tb.write_reg(REG_DAC_PULSE_HEIGHT, 0x7FF)
+    await tb.write_reg(REG_ADC_PERIOD, 0x80)
+    await tb.write_reg(REG_WINDOW_SIZE, 16)
+
+    assert await tb.read_reg(REG_DAC_WIDTH) == 0x10
+    assert await tb.read_reg(REG_WINDOW_SIZE) == 16
+
+    # write data: set cfg_bus_valid signal
+    await tb.write_reg(REG_CONTROL, 1 << CTRL_CFG_BUS_VALID)
+
+    # wait
+    for _ in range(30):
+        await RisingEdge(dut.ctrl_clk)
+
+    # check config
+    assert int(dut.dac_pulse_width) == 0x10
+    assert int(dut.dac_pulse_period) == 0x40
+    assert int(dut.dac_pulse_num) == 3
+    assert int(dut.dac_pulse_height) == 0x7FF
+    assert int(dut.adc_pulse_period) == 0x80
+    assert int(dut.adc_window_size) == 16
+
+    await RisingEdge(dut.ctrl_clk)
+
+
+@cocotb.test()
+async def simple_controller_start_check(dut):
+    tb = TB(dut)
+    await tb.reset()
+    await tb.write_reg(REG_CONTROL, 1 << CTRL_START)
+
+    await RisingEdge(dut.dac_start)
+
+
+@cocotb.test()
+async def simple_dma_desc_status(dut):
+    tb = TB(dut)
+    await tb.reset()
+
+    await tb.write_reg(REG_DESC_READ_ADDR, 0xdead)
+    await tb.write_reg(REG_DESC_READ_LEN, 64)
+    await tb.write_reg(REG_DESC_READ_CONFIG, 0x0000_0001)
+
+    await tb.write_reg(REG_DESC_WRITE_ADDR, 0xbeef)
+    await tb.write_reg(REG_DESC_WRITE_LEN_AND_TAG, 0x0005555)
+
+    # W1S pulse: bit 3 = send_desc_read_o.
+    await tb.write_reg(REG_CONTROL, 1 << CTRL_SEND_DESC_READ)
+
+    await tb.write_reg(REG_CONTROL, 1 << CTRL_SEND_DESC_WRITE)
+
+    for _ in range(20):
+        await RisingEdge(dut.ctrl_clk)
+
+    assert int(dut.desc_read_cmd_out.value) == 0x000000100040DEAD
+    assert int(dut.desc_write_cmd_out.value) == 0x0005555BEEF
+
+    # test status
+    dut.status_read_cmd_in.value = Immediate(123)
+    dut.status_write_cmd_in.value = Immediate(0xabcd90012345)
+    dut.valid_status_read.value = Immediate(1)
+    dut.valid_status_write.value = Immediate(1)
+
+    for _ in range(10):
+        await RisingEdge(dut.ctrl_clk)
+
+    # read status
+    await tb.write_reg(REG_CONTROL, 1 << CTRL_TAKE_STATUS_READ)
+    await tb.write_reg(REG_CONTROL, 1 << CTRL_TAKE_STATUS_WRITE)
+
+    for _ in range(10):
+        await RisingEdge(dut.ctrl_clk)
+
+    assert await tb.read_reg(REG_READ_STATUS) == 123
+    assert await tb.read_reg(REG_STATUS_WRITE_CONFIG) == 0xABCD900
+    assert await tb.read_reg(REG_STATUS_WRITE_LEN) == 0x12345

rtl/controller/tests/test_timing.xdc

@@ -0,0 +1,13 @@
+# Primary clocks
+create_clock -name eth_clk -period 8.000  [get_ports eth_clk_in]
+create_clock -name dac_clk -period 7.692  [get_ports dac_clk_in]
+create_clock -name adc_clk -period 15.385 [get_ports adc_clk_in]
+
+
+# Asynchronous clock groups
+# eth, dac, adc are independent domains
+
+set_clock_groups -name ASYNC_ETH_DAC_ADC -asynchronous \
+    -group [get_clocks eth_clk] \
+    -group [get_clocks dac_clk] \
+    -group [get_clocks adc_clk]

rtl/ethernet-udp/src/eth/axis_mac.sv

@@ -283,6 +283,8 @@ module axis_mac
     reg [31:0] arp_delay;
     reg arp_cached;
 
+    reg write_en_flag;
+
     always @(posedge gmii_tx_clk or negedge rst_n) begin
         if (!rst_n) begin
             tx_state             <= TX_IDLE;
@@ -293,8 +295,8 @@ module axis_mac
             udp_send_data_length <= 16'd0;
             udp_tx_req           <= 1'b0;
             arp_delay            <= 32'b0;
+            write_en_flag        <= 1'b0;
 
-            s_axis_tx_tready     <= 1'b0;
             req_ready            <= 1'b0;
 
             tx_req_len           <= 16'd0;
@@ -309,8 +311,8 @@ module axis_mac
             case (tx_state)
                 // Ready to accept a new packet request
                 TX_IDLE: begin
+                    write_en_flag        <= 1'b0;
                     udp_tx_req       <= 1'b0;
-                    s_axis_tx_tready <= 1'b0;
                     tx_bytes_written <= 16'd0;
                     tx_req_inflight  <= 1'b0;
 
@@ -340,7 +342,6 @@ module axis_mac
                 // Pulse ARP request
                 TX_ARP_REQ: begin
                     req_ready        <= 1'b0;
-                    s_axis_tx_tready <= 1'b0;
                     udp_tx_req       <= 1'b0;
                     
                     arp_delay        <= 32'ha000000;
@@ -350,7 +351,6 @@ module axis_mac
                 // Wait until ARP is resolved
                 TX_ARP_SEND: begin
                     req_ready        <= 1'b0;
-                    s_axis_tx_tready <= 1'b0;
                     udp_tx_req       <= 1'b0;
 
                     // sent
@@ -383,7 +383,7 @@ module axis_mac
 
                     if (udp_ram_data_req) begin
                         udp_tx_req       <= 1'b0;
-                        s_axis_tx_tready <= 1'b1;
+                        write_en_flag <= 1'b1;
                         tx_state         <= TX_STREAM;
                     end
                 end
@@ -394,7 +394,6 @@ module axis_mac
                     udp_tx_req <= 1'b0;
 
                     // keep ready high while receiving payload bytes
-                    s_axis_tx_tready <= (tx_bytes_written < tx_req_len);
 
                     if (s_axis_tx_tvalid && s_axis_tx_tready) begin
                         tx_ram_wr_data <= s_axis_tx_tdata;
@@ -403,7 +402,6 @@ module axis_mac
                         tx_bytes_written <= tx_bytes_written + 1'b1;
 
                         if (tx_bytes_written + 1'b1 >= tx_req_len) begin
-                            s_axis_tx_tready <= 1'b0;
                             tx_state         <= TX_WAIT_DRAIN;
                         end
                     end
@@ -413,7 +411,8 @@ module axis_mac
                 // Wait until TX RAM starts draining enough to allow
                 // the next request.
                 TX_WAIT_DRAIN: begin
-                    s_axis_tx_tready <= 1'b0;
+                    // s_axis_tx_tready <= 1'b0;
+                    write_en_flag        <= 1'b0;
                     udp_tx_req       <= 1'b0;
 
                     if (udp_ram_data_count <= tx_release_threshold)
@@ -425,11 +424,13 @@ module axis_mac
                     tx_state         <= TX_IDLE;
                     tx_ram_wr_en     <= 1'b0;
                     udp_tx_req       <= 1'b0;
-                    s_axis_tx_tready <= 1'b0;
                     req_ready        <= 1'b0;
+                    write_en_flag        <= 1'b0;
                 end
             endcase
         end
     end
 
+    assign s_axis_tx_tready = write_en_flag || udp_ram_data_req;
+
 endmodule

rtl/ethernet-udp/src/eth/mac/mac_test.v

@@ -4,7 +4,7 @@
 //Description :
 //
 //////////////////////////////////////////////////////////////////////////////////////
-`define TEST_SPEED
+//`define TEST_SPEED
 `timescale 1 ns/1 ns
 module mac_test
 (

rtl/ethernet-udp/tests/eth_axis/Makefile

@@ -7,7 +7,7 @@
 #
 
 # FPGA settings
-FPGA_PART = xc7a35tfgg484-1
+FPGA_PART = xc7a100tfgg484-2
 FPGA_TOP = ethernet_axis_echo
 FPGA_ARCH = artix7
 
@@ -23,7 +23,7 @@ SYN_FILES += $(sort $(shell find ../../src -type f \( -name '*.v' -o -name '*.sv
 XCI_FILES = $(sort $(shell find ../../src -type f -name '*.xci'))
 
 XDC_FILES += debug.xdc
-XDC_FILES += ../../../../constraints/ax7a035b.xdc
+XDC_FILES += ../../../../constraints/ax7102.xdc
 
 SIM_TOP = tb_mac_test
 TB_FILES = test_axis_mac_rx.sv

rtl/ethernet-udp/tests/eth_axis/debug.xdc

@@ -1,5 +1,36 @@
 # debug ila
 
+connect_debug_port u_ila_0/clk [get_nets [list rgmii_rxc_IBUF_BUFG]]
+connect_debug_port u_ila_0/probe9 [get_nets [list {axis_mac0/udp_rec_data_length[0]} {axis_mac0/udp_rec_data_length[1]} {axis_mac0/udp_rec_data_length[2]} {axis_mac0/udp_rec_data_length[3]} {axis_mac0/udp_rec_data_length[4]} {axis_mac0/udp_rec_data_length[5]} {axis_mac0/udp_rec_data_length[6]} {axis_mac0/udp_rec_data_length[7]} {axis_mac0/udp_rec_data_length[8]} {axis_mac0/udp_rec_data_length[9]} {axis_mac0/udp_rec_data_length[10]} {axis_mac0/udp_rec_data_length[11]} {axis_mac0/udp_rec_data_length[12]} {axis_mac0/udp_rec_data_length[13]} {axis_mac0/udp_rec_data_length[14]} {axis_mac0/udp_rec_data_length[15]}]]
+connect_debug_port dbg_hub/clk [get_nets rgmii_rxc_IBUF_BUFG]
+
+connect_debug_port u_ila_0/probe22 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[0]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[1]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[2]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[3]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[4]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[5]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[6]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[7]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[8]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[9]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[10]}]]
+connect_debug_port u_ila_0/probe23 [get_nets [list {mac_test0/mac_top0/mac_rx0/mac_rx_datain[0]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[1]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[2]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[3]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[4]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[5]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[6]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[7]}]]
+connect_debug_port u_ila_0/probe24 [get_nets [list {mac_test0/mac_top0/mac_rx0/ip_total_data_length[0]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[1]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[2]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[3]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[4]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[5]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[6]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[7]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[8]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[9]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[10]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[11]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[12]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[13]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[14]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[15]}]]
+connect_debug_port u_ila_0/probe25 [get_nets [list {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[0]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[1]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[2]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[3]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[4]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[5]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[6]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[7]}]]
+connect_debug_port u_ila_0/probe26 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[0]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[1]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[2]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[3]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[4]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[5]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[6]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[7]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[8]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[9]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[10]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[11]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[12]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[13]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[14]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[15]}]]
+connect_debug_port u_ila_0/probe27 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[0]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[1]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[2]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[3]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[4]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[5]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[6]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[7]}]]
+connect_debug_port u_ila_0/probe28 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[0]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[1]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[2]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[3]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[4]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[5]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[6]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[7]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[8]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[9]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[10]}]]
+connect_debug_port u_ila_0/probe29 [get_nets [list {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[0]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[1]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[2]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[3]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[4]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[5]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[6]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[7]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[8]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[9]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[10]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[11]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[12]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[13]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[14]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[15]}]]
+connect_debug_port u_ila_0/probe30 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp0/ck_state[0]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[1]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[2]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[3]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[4]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[5]}]]
+connect_debug_port u_ila_0/probe31 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp0/state[0]} {mac_test0/mac_top0/mac_tx0/udp0/state[1]} {mac_test0/mac_top0/mac_tx0/udp0/state[2]} {mac_test0/mac_top0/mac_tx0/udp0/state[3]} {mac_test0/mac_top0/mac_tx0/udp0/state[4]} {mac_test0/mac_top0/mac_tx0/udp0/state[5]}]]
+connect_debug_port u_ila_0/probe32 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp0/usedw[0]} {mac_test0/mac_top0/mac_tx0/udp0/usedw[1]} {mac_test0/mac_top0/mac_tx0/udp0/usedw[2]} {mac_test0/mac_top0/mac_tx0/udp0/usedw[3]}]]
+connect_debug_port u_ila_0/probe33 [get_nets [list {mac_test0/mac_top0/mac_tx0/mac_tx_data[0]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[1]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[2]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[3]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[4]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[5]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[6]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[7]}]]
+connect_debug_port u_ila_0/probe34 [get_nets [list {mac_test0/mac_top0/mac_tx0/ram_wr_data[0]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[1]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[2]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[3]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[4]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[5]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[6]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[7]}]]
+connect_debug_port u_ila_0/probe35 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[0]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[1]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[2]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[3]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[4]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[5]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[6]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[7]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[8]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[9]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[10]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[11]}]]
+connect_debug_port u_ila_0/probe36 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp_send_data_length[0]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[1]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[2]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[3]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[4]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[5]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[6]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[7]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[8]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[9]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[10]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[11]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[12]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[13]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[14]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[15]}]]
+connect_debug_port u_ila_0/probe37 [get_nets [list {mac_test0/state[0]} {mac_test0/state[1]} {mac_test0/state[2]} {mac_test0/state[3]} {mac_test0/state[4]} {mac_test0/state[5]} {mac_test0/state[6]} {mac_test0/state[7]} {mac_test0/state[8]}]]
+connect_debug_port u_ila_0/probe39 [get_nets [list mac_test0/mac_top0/mac_tx0/almost_full]]
+connect_debug_port u_ila_0/probe45 [get_nets [list mac_test0/mac_top0/mac_tx0/mac_data_valid]]
+connect_debug_port u_ila_0/probe47 [get_nets [list mac_test0/mac_top0/mac_tx0/mac_send_end]]
+connect_debug_port u_ila_0/probe48 [get_nets [list mac_test0/mac_top0/mac_tx0/ram_wr_en]]
+connect_debug_port u_ila_0/probe50 [get_nets [list mac_test0/mac_top0/mac_rx0/udp0/ram_wr_en]]
+connect_debug_port u_ila_0/probe59 [get_nets [list mac_test0/mac_top0/mac_tx0/udp_ram_data_req]]
+connect_debug_port u_ila_0/probe62 [get_nets [list mac_test0/mac_top0/mac_rx0/udp_rec_data_valid]]
+connect_debug_port u_ila_0/probe64 [get_nets [list mac_test0/mac_top0/mac_tx0/udp_tx_end]]
+connect_debug_port u_ila_0/probe66 [get_nets [list mac_test0/mac_top0/mac_tx0/udp_tx_req]]
+connect_debug_port u_ila_0/probe68 [get_nets [list mac_test0/mac_top0/mac_tx0/upper_data_req]]
+
 create_debug_core u_ila_0 ila
 set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_0]
 set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_0]
@@ -10,251 +41,179 @@ set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_0]
 set_property C_TRIGIN_EN false [get_debug_cores u_ila_0]
 set_property C_TRIGOUT_EN false [get_debug_cores u_ila_0]
 set_property port_width 1 [get_debug_ports u_ila_0/clk]
-connect_debug_port u_ila_0/clk [get_nets [list rgmii_rxc_IBUF_BUFG]]
+connect_debug_port u_ila_0/clk [get_nets [list e_gtxc_OBUF_BUFG]]
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe0]
-set_property port_width 8 [get_debug_ports u_ila_0/probe0]
-connect_debug_port u_ila_0/probe0 [get_nets [list {arbi_inst/rx_buffer_inst/e10_100_rxd[0]} {arbi_inst/rx_buffer_inst/e10_100_rxd[1]} {arbi_inst/rx_buffer_inst/e10_100_rxd[2]} {arbi_inst/rx_buffer_inst/e10_100_rxd[3]} {arbi_inst/rx_buffer_inst/e10_100_rxd[4]} {arbi_inst/rx_buffer_inst/e10_100_rxd[5]} {arbi_inst/rx_buffer_inst/e10_100_rxd[6]} {arbi_inst/rx_buffer_inst/e10_100_rxd[7]}]]
+set_property port_width 6 [get_debug_ports u_ila_0/probe0]
+connect_debug_port u_ila_0/probe0 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp0/state[0]} {axis_mac0/mac_top0/mac_tx0/udp0/state[1]} {axis_mac0/mac_top0/mac_tx0/udp0/state[2]} {axis_mac0/mac_top0/mac_tx0/udp0/state[3]} {axis_mac0/mac_top0/mac_tx0/udp0/state[4]} {axis_mac0/mac_top0/mac_tx0/udp0/state[5]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe1]
-set_property port_width 8 [get_debug_ports u_ila_0/probe1]
-connect_debug_port u_ila_0/probe1 [get_nets [list {arbi_inst/gmii_rxd[0]} {arbi_inst/gmii_rxd[1]} {arbi_inst/gmii_rxd[2]} {arbi_inst/gmii_rxd[3]} {arbi_inst/gmii_rxd[4]} {arbi_inst/gmii_rxd[5]} {arbi_inst/gmii_rxd[6]} {arbi_inst/gmii_rxd[7]}]]
+set_property port_width 6 [get_debug_ports u_ila_0/probe1]
+connect_debug_port u_ila_0/probe1 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[0]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[1]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[2]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[3]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[4]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[5]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe2]
-set_property port_width 8 [get_debug_ports u_ila_0/probe2]
-connect_debug_port u_ila_0/probe2 [get_nets [list {arbi_inst/gmii_txd[0]} {arbi_inst/gmii_txd[1]} {arbi_inst/gmii_txd[2]} {arbi_inst/gmii_txd[3]} {arbi_inst/gmii_txd[4]} {arbi_inst/gmii_txd[5]} {arbi_inst/gmii_txd[6]} {arbi_inst/gmii_txd[7]}]]
+set_property port_width 4 [get_debug_ports u_ila_0/probe2]
+connect_debug_port u_ila_0/probe2 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp0/usedw[0]} {axis_mac0/mac_top0/mac_tx0/udp0/usedw[1]} {axis_mac0/mac_top0/mac_tx0/udp0/usedw[2]} {axis_mac0/mac_top0/mac_tx0/udp0/usedw[3]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe3]
 set_property port_width 8 [get_debug_ports u_ila_0/probe3]
-connect_debug_port u_ila_0/probe3 [get_nets [list {arbi_inst/e_txd[0]} {arbi_inst/e_txd[1]} {arbi_inst/e_txd[2]} {arbi_inst/e_txd[3]} {arbi_inst/e_txd[4]} {arbi_inst/e_txd[5]} {arbi_inst/e_txd[6]} {arbi_inst/e_txd[7]}]]
+connect_debug_port u_ila_0/probe3 [get_nets [list {axis_mac0/s_axis_tx_tdata[0]} {axis_mac0/s_axis_tx_tdata[1]} {axis_mac0/s_axis_tx_tdata[2]} {axis_mac0/s_axis_tx_tdata[3]} {axis_mac0/s_axis_tx_tdata[4]} {axis_mac0/s_axis_tx_tdata[5]} {axis_mac0/s_axis_tx_tdata[6]} {axis_mac0/s_axis_tx_tdata[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe4]
-set_property port_width 8 [get_debug_ports u_ila_0/probe4]
-connect_debug_port u_ila_0/probe4 [get_nets [list {arbi_inst/e_rxd[0]} {arbi_inst/e_rxd[1]} {arbi_inst/e_rxd[2]} {arbi_inst/e_rxd[3]} {arbi_inst/e_rxd[4]} {arbi_inst/e_rxd[5]} {arbi_inst/e_rxd[6]} {arbi_inst/e_rxd[7]}]]
+set_property port_width 16 [get_debug_ports u_ila_0/probe4]
+connect_debug_port u_ila_0/probe4 [get_nets [list {axis_mac0/rx_payload_len[0]} {axis_mac0/rx_payload_len[1]} {axis_mac0/rx_payload_len[2]} {axis_mac0/rx_payload_len[3]} {axis_mac0/rx_payload_len[4]} {axis_mac0/rx_payload_len[5]} {axis_mac0/rx_payload_len[6]} {axis_mac0/rx_payload_len[7]} {axis_mac0/rx_payload_len[8]} {axis_mac0/rx_payload_len[9]} {axis_mac0/rx_payload_len[10]} {axis_mac0/rx_payload_len[11]} {axis_mac0/rx_payload_len[12]} {axis_mac0/rx_payload_len[13]} {axis_mac0/rx_payload_len[14]} {axis_mac0/rx_payload_len[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe5]
-set_property port_width 16 [get_debug_ports u_ila_0/probe5]
-connect_debug_port u_ila_0/probe5 [get_nets [list {arbi_inst/tx_buffer_inst/tx_data_cnt[0]} {arbi_inst/tx_buffer_inst/tx_data_cnt[1]} {arbi_inst/tx_buffer_inst/tx_data_cnt[2]} {arbi_inst/tx_buffer_inst/tx_data_cnt[3]} {arbi_inst/tx_buffer_inst/tx_data_cnt[4]} {arbi_inst/tx_buffer_inst/tx_data_cnt[5]} {arbi_inst/tx_buffer_inst/tx_data_cnt[6]} {arbi_inst/tx_buffer_inst/tx_data_cnt[7]} {arbi_inst/tx_buffer_inst/tx_data_cnt[8]} {arbi_inst/tx_buffer_inst/tx_data_cnt[9]} {arbi_inst/tx_buffer_inst/tx_data_cnt[10]} {arbi_inst/tx_buffer_inst/tx_data_cnt[11]} {arbi_inst/tx_buffer_inst/tx_data_cnt[12]} {arbi_inst/tx_buffer_inst/tx_data_cnt[13]} {arbi_inst/tx_buffer_inst/tx_data_cnt[14]} {arbi_inst/tx_buffer_inst/tx_data_cnt[15]}]]
+set_property port_width 2 [get_debug_ports u_ila_0/probe5]
+connect_debug_port u_ila_0/probe5 [get_nets [list {axis_mac0/rx_state[0]} {axis_mac0/rx_state[1]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe6]
 set_property port_width 8 [get_debug_ports u_ila_0/probe6]
-connect_debug_port u_ila_0/probe6 [get_nets [list {arbi_inst/tx_buffer_inst/tx_rdata[0]} {arbi_inst/tx_buffer_inst/tx_rdata[1]} {arbi_inst/tx_buffer_inst/tx_rdata[2]} {arbi_inst/tx_buffer_inst/tx_rdata[3]} {arbi_inst/tx_buffer_inst/tx_rdata[4]} {arbi_inst/tx_buffer_inst/tx_rdata[5]} {arbi_inst/tx_buffer_inst/tx_rdata[6]} {arbi_inst/tx_buffer_inst/tx_rdata[7]}]]
+connect_debug_port u_ila_0/probe6 [get_nets [list {axis_mac0/m_axis_rx_tdata[0]} {axis_mac0/m_axis_rx_tdata[1]} {axis_mac0/m_axis_rx_tdata[2]} {axis_mac0/m_axis_rx_tdata[3]} {axis_mac0/m_axis_rx_tdata[4]} {axis_mac0/m_axis_rx_tdata[5]} {axis_mac0/m_axis_rx_tdata[6]} {axis_mac0/m_axis_rx_tdata[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe7]
-set_property port_width 8 [get_debug_ports u_ila_0/probe7]
-connect_debug_port u_ila_0/probe7 [get_nets [list {arbi_inst/tx_buffer_inst/tx_wdata[0]} {arbi_inst/tx_buffer_inst/tx_wdata[1]} {arbi_inst/tx_buffer_inst/tx_wdata[2]} {arbi_inst/tx_buffer_inst/tx_wdata[3]} {arbi_inst/tx_buffer_inst/tx_wdata[4]} {arbi_inst/tx_buffer_inst/tx_wdata[5]} {arbi_inst/tx_buffer_inst/tx_wdata[6]} {arbi_inst/tx_buffer_inst/tx_wdata[7]}]]
+set_property port_width 16 [get_debug_ports u_ila_0/probe7]
+connect_debug_port u_ila_0/probe7 [get_nets [list {axis_mac0/rx_index[0]} {axis_mac0/rx_index[1]} {axis_mac0/rx_index[2]} {axis_mac0/rx_index[3]} {axis_mac0/rx_index[4]} {axis_mac0/rx_index[5]} {axis_mac0/rx_index[6]} {axis_mac0/rx_index[7]} {axis_mac0/rx_index[8]} {axis_mac0/rx_index[9]} {axis_mac0/rx_index[10]} {axis_mac0/rx_index[11]} {axis_mac0/rx_index[12]} {axis_mac0/rx_index[13]} {axis_mac0/rx_index[14]} {axis_mac0/rx_index[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe8]
-set_property port_width 6 [get_debug_ports u_ila_0/probe8]
-connect_debug_port u_ila_0/probe8 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[0]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[1]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[2]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[3]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[4]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[5]}]]
+set_property port_width 3 [get_debug_ports u_ila_0/probe8]
+connect_debug_port u_ila_0/probe8 [get_nets [list {axis_mac0/tx_state[0]} {axis_mac0/tx_state[1]} {axis_mac0/tx_state[2]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe9]
-set_property port_width 16 [get_debug_ports u_ila_0/probe9]
-connect_debug_port u_ila_0/probe9 [get_nets [list {axis_mac0/udp_rec_data_length[0]} {axis_mac0/udp_rec_data_length[1]} {axis_mac0/udp_rec_data_length[2]} {axis_mac0/udp_rec_data_length[3]} {axis_mac0/udp_rec_data_length[4]} {axis_mac0/udp_rec_data_length[5]} {axis_mac0/udp_rec_data_length[6]} {axis_mac0/udp_rec_data_length[7]} {axis_mac0/udp_rec_data_length[8]} {axis_mac0/udp_rec_data_length[9]} {axis_mac0/udp_rec_data_length[10]} {axis_mac0/udp_rec_data_length[11]} {axis_mac0/udp_rec_data_length[12]} {axis_mac0/udp_rec_data_length[13]} {axis_mac0/udp_rec_data_length[14]} {axis_mac0/udp_rec_data_length[15]}]]
+set_property port_width 2 [get_debug_ports u_ila_0/probe9]
+connect_debug_port u_ila_0/probe9 [get_nets [list {test_state[0]} {test_state[1]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe10]
-set_property port_width 3 [get_debug_ports u_ila_0/probe10]
-connect_debug_port u_ila_0/probe10 [get_nets [list {axis_mac0/tx_state[0]} {axis_mac0/tx_state[1]} {axis_mac0/tx_state[2]}]]
+set_property port_width 16 [get_debug_ports u_ila_0/probe10]
+connect_debug_port u_ila_0/probe10 [get_nets [list {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[0]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[1]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[2]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[3]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[4]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[5]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[6]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[7]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[8]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[9]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[10]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[11]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[12]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[13]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[14]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe11]
-set_property port_width 8 [get_debug_ports u_ila_0/probe11]
-connect_debug_port u_ila_0/probe11 [get_nets [list {axis_mac0/s_axis_tx_tdata[0]} {axis_mac0/s_axis_tx_tdata[1]} {axis_mac0/s_axis_tx_tdata[2]} {axis_mac0/s_axis_tx_tdata[3]} {axis_mac0/s_axis_tx_tdata[4]} {axis_mac0/s_axis_tx_tdata[5]} {axis_mac0/s_axis_tx_tdata[6]} {axis_mac0/s_axis_tx_tdata[7]}]]
+set_property port_width 11 [get_debug_ports u_ila_0/probe11]
+connect_debug_port u_ila_0/probe11 [get_nets [list {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[0]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[1]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[2]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[3]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[4]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[5]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[6]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[7]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[8]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[9]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[10]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe12]
-set_property port_width 2 [get_debug_ports u_ila_0/probe12]
-connect_debug_port u_ila_0/probe12 [get_nets [list {axis_mac0/rx_state[0]} {axis_mac0/rx_state[1]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe12]
+connect_debug_port u_ila_0/probe12 [get_nets [list {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[0]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[1]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[2]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[3]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[4]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[5]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[6]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe13]
 set_property port_width 16 [get_debug_ports u_ila_0/probe13]
-connect_debug_port u_ila_0/probe13 [get_nets [list {axis_mac0/rx_payload_len[0]} {axis_mac0/rx_payload_len[1]} {axis_mac0/rx_payload_len[2]} {axis_mac0/rx_payload_len[3]} {axis_mac0/rx_payload_len[4]} {axis_mac0/rx_payload_len[5]} {axis_mac0/rx_payload_len[6]} {axis_mac0/rx_payload_len[7]} {axis_mac0/rx_payload_len[8]} {axis_mac0/rx_payload_len[9]} {axis_mac0/rx_payload_len[10]} {axis_mac0/rx_payload_len[11]} {axis_mac0/rx_payload_len[12]} {axis_mac0/rx_payload_len[13]} {axis_mac0/rx_payload_len[14]} {axis_mac0/rx_payload_len[15]}]]
+connect_debug_port u_ila_0/probe13 [get_nets [list {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[0]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[1]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[2]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[3]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[4]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[5]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[6]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[7]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[8]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[9]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[10]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[11]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[12]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[13]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[14]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe14]
-set_property port_width 16 [get_debug_ports u_ila_0/probe14]
-connect_debug_port u_ila_0/probe14 [get_nets [list {axis_mac0/rx_index[0]} {axis_mac0/rx_index[1]} {axis_mac0/rx_index[2]} {axis_mac0/rx_index[3]} {axis_mac0/rx_index[4]} {axis_mac0/rx_index[5]} {axis_mac0/rx_index[6]} {axis_mac0/rx_index[7]} {axis_mac0/rx_index[8]} {axis_mac0/rx_index[9]} {axis_mac0/rx_index[10]} {axis_mac0/rx_index[11]} {axis_mac0/rx_index[12]} {axis_mac0/rx_index[13]} {axis_mac0/rx_index[14]} {axis_mac0/rx_index[15]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe14]
+connect_debug_port u_ila_0/probe14 [get_nets [list {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[0]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[1]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[2]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[3]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[4]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[5]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[6]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe15]
-set_property port_width 8 [get_debug_ports u_ila_0/probe15]
-connect_debug_port u_ila_0/probe15 [get_nets [list {axis_mac0/m_axis_rx_tdata[0]} {axis_mac0/m_axis_rx_tdata[1]} {axis_mac0/m_axis_rx_tdata[2]} {axis_mac0/m_axis_rx_tdata[3]} {axis_mac0/m_axis_rx_tdata[4]} {axis_mac0/m_axis_rx_tdata[5]} {axis_mac0/m_axis_rx_tdata[6]} {axis_mac0/m_axis_rx_tdata[7]}]]
+set_property port_width 16 [get_debug_ports u_ila_0/probe15]
+connect_debug_port u_ila_0/probe15 [get_nets [list {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[0]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[1]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[2]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[3]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[4]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[5]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[6]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[7]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[8]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[9]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[10]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[11]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[12]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[13]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[14]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe16]
-set_property port_width 16 [get_debug_ports u_ila_0/probe16]
-connect_debug_port u_ila_0/probe16 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[0]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[1]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[2]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[3]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[4]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[5]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[6]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[7]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[8]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[9]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[10]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[11]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[12]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[13]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[14]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[15]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe16]
+connect_debug_port u_ila_0/probe16 [get_nets [list {axis_mac0/mac_top0/mac_tx0/mac_tx_data[0]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[1]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[2]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[3]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[4]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[5]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[6]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe17]
-set_property port_width 12 [get_debug_ports u_ila_0/probe17]
-connect_debug_port u_ila_0/probe17 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[0]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[1]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[2]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[3]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[4]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[5]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[6]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[7]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[8]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[9]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[10]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[11]}]]
+set_property port_width 16 [get_debug_ports u_ila_0/probe17]
+connect_debug_port u_ila_0/probe17 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[0]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[1]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[2]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[3]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[4]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[5]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[6]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[7]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[8]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[9]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[10]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[11]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[12]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[13]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[14]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe18]
-set_property port_width 8 [get_debug_ports u_ila_0/probe18]
-connect_debug_port u_ila_0/probe18 [get_nets [list {axis_mac0/mac_top0/mac_tx0/ram_wr_data[0]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[1]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[2]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[3]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[4]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[5]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[6]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[7]}]]
+set_property port_width 12 [get_debug_ports u_ila_0/probe18]
+connect_debug_port u_ila_0/probe18 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[0]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[1]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[2]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[3]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[4]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[5]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[6]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[7]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[8]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[9]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[10]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[11]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe19]
 set_property port_width 8 [get_debug_ports u_ila_0/probe19]
-connect_debug_port u_ila_0/probe19 [get_nets [list {axis_mac0/mac_top0/mac_tx0/mac_tx_data[0]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[1]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[2]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[3]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[4]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[5]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[6]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[7]}]]
+connect_debug_port u_ila_0/probe19 [get_nets [list {axis_mac0/mac_top0/mac_tx0/ram_wr_data[0]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[1]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[2]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[3]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[4]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[5]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[6]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe20]
-set_property port_width 4 [get_debug_ports u_ila_0/probe20]
-connect_debug_port u_ila_0/probe20 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp0/usedw[0]} {axis_mac0/mac_top0/mac_tx0/udp0/usedw[1]} {axis_mac0/mac_top0/mac_tx0/udp0/usedw[2]} {axis_mac0/mac_top0/mac_tx0/udp0/usedw[3]}]]
+set_property port_width 11 [get_debug_ports u_ila_0/probe20]
+connect_debug_port u_ila_0/probe20 [get_nets [list {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[0]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[1]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[2]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[3]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[4]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[5]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[6]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[7]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[8]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[9]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[10]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe21]
-set_property port_width 6 [get_debug_ports u_ila_0/probe21]
-connect_debug_port u_ila_0/probe21 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp0/state[0]} {axis_mac0/mac_top0/mac_tx0/udp0/state[1]} {axis_mac0/mac_top0/mac_tx0/udp0/state[2]} {axis_mac0/mac_top0/mac_tx0/udp0/state[3]} {axis_mac0/mac_top0/mac_tx0/udp0/state[4]} {axis_mac0/mac_top0/mac_tx0/udp0/state[5]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe21]
+connect_debug_port u_ila_0/probe21 [get_nets [list {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[0]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[1]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[2]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[3]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[4]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[5]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[6]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe22]
-set_property port_width 16 [get_debug_ports u_ila_0/probe22]
-connect_debug_port u_ila_0/probe22 [get_nets [list {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[0]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[1]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[2]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[3]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[4]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[5]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[6]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[7]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[8]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[9]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[10]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[11]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[12]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[13]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[14]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[15]}]]
+set_property port_width 1 [get_debug_ports u_ila_0/probe22]
+connect_debug_port u_ila_0/probe22 [get_nets [list axis_mac0/mac_top0/mac_tx0/almost_full]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe23]
-set_property port_width 11 [get_debug_ports u_ila_0/probe23]
-connect_debug_port u_ila_0/probe23 [get_nets [list {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[0]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[1]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[2]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[3]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[4]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[5]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[6]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[7]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[8]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[9]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[10]}]]
+set_property port_width 1 [get_debug_ports u_ila_0/probe23]
+connect_debug_port u_ila_0/probe23 [get_nets [list axis_mac0/arp_found]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe24]
-set_property port_width 8 [get_debug_ports u_ila_0/probe24]
-connect_debug_port u_ila_0/probe24 [get_nets [list {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[0]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[1]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[2]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[3]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[4]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[5]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[6]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[7]}]]
+set_property port_width 1 [get_debug_ports u_ila_0/probe24]
+connect_debug_port u_ila_0/probe24 [get_nets [list axis_mac0/m_axis_rx_tlast]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe25]
-set_property port_width 16 [get_debug_ports u_ila_0/probe25]
-connect_debug_port u_ila_0/probe25 [get_nets [list {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[0]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[1]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[2]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[3]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[4]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[5]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[6]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[7]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[8]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[9]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[10]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[11]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[12]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[13]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[14]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[15]}]]
+set_property port_width 1 [get_debug_ports u_ila_0/probe25]
+connect_debug_port u_ila_0/probe25 [get_nets [list axis_mac0/m_axis_rx_tready]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe26]
-set_property port_width 8 [get_debug_ports u_ila_0/probe26]
-connect_debug_port u_ila_0/probe26 [get_nets [list {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[0]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[1]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[2]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[3]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[4]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[5]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[6]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[7]}]]
+set_property port_width 1 [get_debug_ports u_ila_0/probe26]
+connect_debug_port u_ila_0/probe26 [get_nets [list axis_mac0/m_axis_rx_tvalid]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe27]
-set_property port_width 16 [get_debug_ports u_ila_0/probe27]
-connect_debug_port u_ila_0/probe27 [get_nets [list {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[0]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[1]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[2]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[3]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[4]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[5]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[6]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[7]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[8]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[9]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[10]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[11]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[12]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[13]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[14]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[15]}]]
+set_property port_width 1 [get_debug_ports u_ila_0/probe27]
+connect_debug_port u_ila_0/probe27 [get_nets [list axis_mac0/mac_top0/mac_tx0/mac_data_valid]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe28]
-set_property port_width 8 [get_debug_ports u_ila_0/probe28]
-connect_debug_port u_ila_0/probe28 [get_nets [list {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[0]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[1]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[2]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[3]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[4]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[5]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[6]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[7]}]]
+set_property port_width 1 [get_debug_ports u_ila_0/probe28]
+connect_debug_port u_ila_0/probe28 [get_nets [list axis_mac0/mac_top0/mac_tx0/mac_send_end]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe29]
-set_property port_width 11 [get_debug_ports u_ila_0/probe29]
-connect_debug_port u_ila_0/probe29 [get_nets [list {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[0]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[1]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[2]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[3]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[4]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[5]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[6]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[7]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[8]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[9]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[10]}]]
+set_property port_width 1 [get_debug_ports u_ila_0/probe29]
+connect_debug_port u_ila_0/probe29 [get_nets [list axis_mac0/mac_top0/mac_rx0/udp0/ram_wr_en]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe30]
-set_property port_width 2 [get_debug_ports u_ila_0/probe30]
-connect_debug_port u_ila_0/probe30 [get_nets [list {test_state[0]} {test_state[1]}]]
+set_property port_width 1 [get_debug_ports u_ila_0/probe30]
+connect_debug_port u_ila_0/probe30 [get_nets [list axis_mac0/mac_top0/mac_tx0/ram_wr_en]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe31]
 set_property port_width 1 [get_debug_ports u_ila_0/probe31]
-connect_debug_port u_ila_0/probe31 [get_nets [list axis_mac0/mac_top0/mac_tx0/almost_full]]
+connect_debug_port u_ila_0/probe31 [get_nets [list req_ready]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe32]
 set_property port_width 1 [get_debug_ports u_ila_0/probe32]
-connect_debug_port u_ila_0/probe32 [get_nets [list axis_mac0/arp_found]]
+connect_debug_port u_ila_0/probe32 [get_nets [list axis_mac0/req_ready]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe33]
 set_property port_width 1 [get_debug_ports u_ila_0/probe33]
-connect_debug_port u_ila_0/probe33 [get_nets [list arbi_inst/rx_buffer_inst/e10_100_rx_dv]]
+connect_debug_port u_ila_0/probe33 [get_nets [list axis_mac0/s_axis_tx_tlast]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe34]
 set_property port_width 1 [get_debug_ports u_ila_0/probe34]
-connect_debug_port u_ila_0/probe34 [get_nets [list arbi_inst/e_rx_dv]]
+connect_debug_port u_ila_0/probe34 [get_nets [list axis_mac0/s_axis_tx_tready]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe35]
 set_property port_width 1 [get_debug_ports u_ila_0/probe35]
-connect_debug_port u_ila_0/probe35 [get_nets [list arbi_inst/e_tx_en]]
+connect_debug_port u_ila_0/probe35 [get_nets [list axis_mac0/s_axis_tx_tvalid]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe36]
 set_property port_width 1 [get_debug_ports u_ila_0/probe36]
-connect_debug_port u_ila_0/probe36 [get_nets [list arbi_inst/gmii_rx_dv]]
+connect_debug_port u_ila_0/probe36 [get_nets [list send_req]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe37]
 set_property port_width 1 [get_debug_ports u_ila_0/probe37]
-connect_debug_port u_ila_0/probe37 [get_nets [list arbi_inst/rx_buffer_inst/gmii_rx_dv_d0]]
+connect_debug_port u_ila_0/probe37 [get_nets [list axis_mac0/send_req]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe38]
 set_property port_width 1 [get_debug_ports u_ila_0/probe38]
-connect_debug_port u_ila_0/probe38 [get_nets [list arbi_inst/rx_buffer_inst/gmii_rx_dv_d1]]
+connect_debug_port u_ila_0/probe38 [get_nets [list axis_mac0/mac_top0/mac_tx0/udp_ram_data_req]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe39]
 set_property port_width 1 [get_debug_ports u_ila_0/probe39]
-connect_debug_port u_ila_0/probe39 [get_nets [list arbi_inst/gmii_tx_en]]
+connect_debug_port u_ila_0/probe39 [get_nets [list axis_mac0/mac_top0/mac_rx0/udp_rec_data_valid]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe40]
 set_property port_width 1 [get_debug_ports u_ila_0/probe40]
-connect_debug_port u_ila_0/probe40 [get_nets [list axis_mac0/m_axis_rx_tlast]]
+connect_debug_port u_ila_0/probe40 [get_nets [list axis_mac0/mac_top0/mac_tx0/udp_tx_end]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe41]
 set_property port_width 1 [get_debug_ports u_ila_0/probe41]
-connect_debug_port u_ila_0/probe41 [get_nets [list axis_mac0/m_axis_rx_tready]]
+connect_debug_port u_ila_0/probe41 [get_nets [list axis_mac0/mac_top0/mac_tx0/udp_tx_req]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe42]
 set_property port_width 1 [get_debug_ports u_ila_0/probe42]
-connect_debug_port u_ila_0/probe42 [get_nets [list axis_mac0/m_axis_rx_tvalid]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe43]
-set_property port_width 1 [get_debug_ports u_ila_0/probe43]
-connect_debug_port u_ila_0/probe43 [get_nets [list axis_mac0/mac_top0/mac_tx0/mac_data_valid]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe44]
-set_property port_width 1 [get_debug_ports u_ila_0/probe44]
-connect_debug_port u_ila_0/probe44 [get_nets [list axis_mac0/mac_top0/mac_tx0/mac_send_end]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe45]
-set_property port_width 1 [get_debug_ports u_ila_0/probe45]
-connect_debug_port u_ila_0/probe45 [get_nets [list axis_mac0/mac_top0/mac_rx0/udp0/ram_wr_en]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe46]
-set_property port_width 1 [get_debug_ports u_ila_0/probe46]
-connect_debug_port u_ila_0/probe46 [get_nets [list axis_mac0/mac_top0/mac_tx0/ram_wr_en]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe47]
-set_property port_width 1 [get_debug_ports u_ila_0/probe47]
-connect_debug_port u_ila_0/probe47 [get_nets [list req_ready]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe48]
-set_property port_width 1 [get_debug_ports u_ila_0/probe48]
-connect_debug_port u_ila_0/probe48 [get_nets [list axis_mac0/req_ready]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe49]
-set_property port_width 1 [get_debug_ports u_ila_0/probe49]
-connect_debug_port u_ila_0/probe49 [get_nets [list axis_mac0/s_axis_tx_tlast]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe50]
-set_property port_width 1 [get_debug_ports u_ila_0/probe50]
-connect_debug_port u_ila_0/probe50 [get_nets [list axis_mac0/s_axis_tx_tready]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe51]
-set_property port_width 1 [get_debug_ports u_ila_0/probe51]
-connect_debug_port u_ila_0/probe51 [get_nets [list axis_mac0/s_axis_tx_tvalid]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe52]
-set_property port_width 1 [get_debug_ports u_ila_0/probe52]
-connect_debug_port u_ila_0/probe52 [get_nets [list axis_mac0/send_req]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe53]
-set_property port_width 1 [get_debug_ports u_ila_0/probe53]
-connect_debug_port u_ila_0/probe53 [get_nets [list send_req]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe54]
-set_property port_width 1 [get_debug_ports u_ila_0/probe54]
-connect_debug_port u_ila_0/probe54 [get_nets [list arbi_inst/tx_buffer_inst/tx_rden]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe55]
-set_property port_width 1 [get_debug_ports u_ila_0/probe55]
-connect_debug_port u_ila_0/probe55 [get_nets [list arbi_inst/tx_buffer_inst/tx_wren]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe56]
-set_property port_width 1 [get_debug_ports u_ila_0/probe56]
-connect_debug_port u_ila_0/probe56 [get_nets [list axis_mac0/mac_top0/mac_tx0/udp_ram_data_req]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe57]
-set_property port_width 1 [get_debug_ports u_ila_0/probe57]
-connect_debug_port u_ila_0/probe57 [get_nets [list axis_mac0/mac_top0/mac_rx0/udp_rec_data_valid]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe58]
-set_property port_width 1 [get_debug_ports u_ila_0/probe58]
-connect_debug_port u_ila_0/probe58 [get_nets [list axis_mac0/mac_top0/mac_tx0/udp_tx_end]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe59]
-set_property port_width 1 [get_debug_ports u_ila_0/probe59]
-connect_debug_port u_ila_0/probe59 [get_nets [list axis_mac0/mac_top0/mac_tx0/udp_tx_req]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe60]
-set_property port_width 1 [get_debug_ports u_ila_0/probe60]
-connect_debug_port u_ila_0/probe60 [get_nets [list axis_mac0/mac_top0/mac_tx0/upper_data_req]]
+connect_debug_port u_ila_0/probe42 [get_nets [list axis_mac0/mac_top0/mac_tx0/upper_data_req]]
 set_property C_CLK_INPUT_FREQ_HZ 300000000 [get_debug_cores dbg_hub]
 set_property C_ENABLE_CLK_DIVIDER false [get_debug_cores dbg_hub]
 set_property C_USER_SCAN_CHAIN 1 [get_debug_cores dbg_hub]
-connect_debug_port dbg_hub/clk [get_nets rgmii_rxc_IBUF_BUFG]
+connect_debug_port dbg_hub/clk [get_nets e_gtxc_OBUF_BUFG]

rtl/ethernet-udp/tests/eth_axis/ethernet_axis_echo.v

@@ -7,113 +7,63 @@
 
 module ethernet_axis_echo
 (
-    input               sys_clk_p,
-    input               sys_clk_n,
-    input               rst_n,
-    output [3:0]        led,
-    output              e_reset,
-    output              e_mdc,
-    inout               e_mdio,
-    output [3:0]        rgmii_txd,
-    output              rgmii_txctl,
-    output              rgmii_txc,
-    input  [3:0]        rgmii_rxd,
-    input               rgmii_rxctl,
-    input               rgmii_rxc
-);
+    input                  sys_clk_p,                    // system clock positive
+    input                  sys_clk_n,                    // system clock negative 
+    input                   rst_n,                       // reset ,low active
+    output [3:0]            led,                         // display network rate status
+    output                  e_reset,                     // phy reset
+    output                  e_mdc,                       // phy emdio clock
+    inout                   e_mdio,                      // phy emdio data
+    input	                e_rxc,                       // 125Mhz ethernet gmii rx clock
+    input                   e_rxdv,                      // GMII recieving data valid
+    input                   e_rxer,                      // GMII recieving data error                    
+    input [7:0]             e_rxd,                       // GMII recieving data          
 
-    // ------------------------------------------------------------
-    // Internal GMII-side signals
-    // ------------------------------------------------------------
-    wire  [7:0] gmii_txd;
-    wire        gmii_tx_en;
-    wire        gmii_tx_er;
-    wire        gmii_tx_clk;
-    wire        gmii_crs;
-    wire        gmii_col;
-    wire  [7:0] gmii_rxd_i;
-    wire        gmii_rx_dv;
-    wire        gmii_rx_er;
-    wire        gmii_rx_clk;
+    input                   e_txc,                       // 25Mhz ethernet mii tx clock         
+    output                  e_gtxc,                      // 125Mhz ethernet gmii tx clock  
+    output                  e_txen,                      // GMII sending data valid    
+    output                  e_txer,                      // GMII sending data error                   
+    output[7:0]             e_txd                        // GMII sending data 
+    );
+    wire                    sys_clk;                     //single end clock 
+    wire  [31:0]            pack_total_len ;             //package length
+    wire [1:0]              speed      ;                 //net speed select
+    wire                    link       ;                 //link status
+    wire                    erxdv    ;
+    wire [7:0]              erxd      ;
+    wire                    e_tx_en    ;
+    wire [7:0]              etxd      ;
+    wire                    e_rst_n    ;
+    assign e_gtxc = e_rxc;	 
+    assign e_reset = 1'b1; 
 
-    wire [31:0] pack_total_len;
+    // generate single end clock
 
-    wire        e_rx_dv;
-    wire [7:0]  e_rxd;
-    wire        e_tx_en;
-    wire [7:0]  e_txd;
-    wire        e_rst_n;
-    wire        sys_clk;
-
-    wire        duplex_mode;
-
-    assign duplex_mode = 1'b1;
-
-    // ------------------------------------------------------------
-    // System clock buffer
-    // ------------------------------------------------------------
     IBUFDS sys_clk_ibufgds
     (
-        .O  (sys_clk),
-        .I  (sys_clk_p),
-        .IB (sys_clk_n)
+    .O                      (sys_clk                 ),
+    .I                      (sys_clk_p               ),
+    .IB                     (sys_clk_n               )
     );
 
-    // ------------------------------------------------------------
-    // IDELAYCTRL
-    // ------------------------------------------------------------
-    (* IODELAY_GROUP = "rgmii_idelay_group" *)
-    IDELAYCTRL IDELAYCTRL_inst (
-        .RDY(),
-        .REFCLK(sys_clk),
-        .RST(1'b0)
-    );
 
-    // ------------------------------------------------------------
-    // GMII <-> RGMII conversion
-    // ------------------------------------------------------------
-    util_gmii_to_rgmii util_gmii_to_rgmii_m0
-    (
-        .reset           (1'b0),
-        .rgmii_td        (rgmii_txd),
-        .rgmii_tx_ctl    (rgmii_txctl),
-        .rgmii_txc       (rgmii_txc),
-        .rgmii_rd        (rgmii_rxd),
-        .rgmii_rx_ctl    (rgmii_rxctl),
-        .gmii_rx_clk     (gmii_rx_clk),
-        .gmii_txd        (e_txd),
-        .gmii_tx_en      (e_tx_en),
-        .gmii_tx_er      (1'b0),
-        .gmii_tx_clk     (gmii_tx_clk),
-        .gmii_crs        (gmii_crs),
-        .gmii_col        (gmii_col),
-        .gmii_rxd        (gmii_rxd_i),
-        .rgmii_rxc       (rgmii_rxc),
-        .gmii_rx_dv      (gmii_rx_dv),
-        .gmii_rx_er      (gmii_rx_er),
-        .speed_selection (2'b10),
-        .duplex_mode     (duplex_mode)
-    );
-
-    // ------------------------------------------------------------
-    // GMII arbitration / adaptation
-    // ------------------------------------------------------------
+    // Different conversion of GMII data according to different network speeds
     gmii_arbi arbi_inst
     (
-        .clk            (gmii_tx_clk),
-        .rst_n          (rst_n),
-        .speed          (2'b10),
-        .link           (1'b1),
-        .pack_total_len (pack_total_len),
-        .e_rst_n        (e_rst_n),
-        .gmii_rx_dv     (gmii_rx_dv),
-        .gmii_rxd       (gmii_rxd_i),
-        .gmii_tx_en     (gmii_tx_en),
-        .gmii_txd       (gmii_txd),
-        .e_rx_dv        (e_rx_dv),
-        .e_rxd          (e_rxd),
-        .e_tx_en        (e_tx_en),
-        .e_txd          (e_txd)
+    .clk                    (e_gtxc                 ),
+    .rst_n                  (rst_n                  ),
+    .speed                  (2'b10                  ),  
+    .link                   (1'b1                   ), 
+    .pack_total_len         (pack_total_len         ), 
+    .e_rst_n                (e_rst_n                ),
+    .gmii_rx_dv             (e_rxdv                 ),
+    .gmii_rxd               (e_rxd                  ),
+    .gmii_tx_en             (e_tx_en                ),
+    .gmii_txd               (etxd                   ), 
+    .e_rx_dv                (erxdv                  ),
+    .e_rxd                  (erxd                   ),
+    .e_tx_en                (e_txen                 ),
+    .e_txd                  (e_txd                  ) 
     );
 
     // ------------------------------------------------------------
@@ -139,14 +89,14 @@ module ethernet_axis_echo
     // ------------------------------------------------------------
     axis_mac axis_mac0
     (
-        .gmii_tx_clk       (gmii_tx_clk),
-        .gmii_rx_clk       (gmii_rx_clk),
+        .gmii_tx_clk       (e_gtxc),
+        .gmii_rx_clk       (e_rxc),
         .rst_n             (e_rst_n),
 
-        .gmii_rx_dv        (e_rx_dv),
-        .gmii_rxd          (e_rxd),
-        .gmii_tx_en        (gmii_tx_en),
-        .gmii_txd          (gmii_txd),
+        .gmii_rx_dv        (erxdv),
+        .gmii_rxd          (erxd),
+        .gmii_tx_en        (e_tx_en),
+        .gmii_txd          (etxd),
 
         .send_req          (send_req),
         .data_length       (data_length),
@@ -184,7 +134,7 @@ module ethernet_axis_echo
 
     assign tx_done_pulse_rx = tx_done_toggle_rx_d1 ^ tx_done_toggle_rx_d0;
 
-    always @(posedge gmii_rx_clk or negedge e_rst_n) begin
+    always @(posedge e_rxc or negedge e_rst_n) begin
         if (!e_rst_n) begin
             tx_done_toggle_rx_d0 <= 1'b0;
             tx_done_toggle_rx_d1 <= 1'b0;
@@ -194,7 +144,7 @@ module ethernet_axis_echo
         end
     end
 
-    always @(posedge gmii_rx_clk or negedge e_rst_n) begin
+    always @(posedge e_rxc or negedge e_rst_n) begin
         if (!e_rst_n) begin
             rx_wr_ptr        <= 16'd0;
             rx_pkt_len       <= 16'd0;
@@ -227,7 +177,7 @@ module ethernet_axis_echo
     // sync RX pendind to TX domain
     reg rx_pkt_pending_tx_d0, rx_pkt_pending_tx_d1;
 
-    always @(posedge gmii_tx_clk or negedge e_rst_n) begin
+    always @(posedge e_gtxc or negedge e_rst_n) begin
         if (!e_rst_n) begin
             rx_pkt_pending_tx_d0 <= 1'b0;
             rx_pkt_pending_tx_d1 <= 1'b0;
@@ -253,7 +203,7 @@ module ethernet_axis_echo
     reg [15:0] tx_pkt_len;
     reg [15:0] tx_rd_ptr;
 
-    always @(posedge gmii_tx_clk or negedge e_rst_n) begin
+    always @(posedge e_gtxc or negedge e_rst_n) begin
         if (!e_rst_n) begin
             test_state       <= TX_IDLE;
             tx_busy          <= 1'b0;

rtl/ethernet-udp/tests/eth_minimal/Makefile

@@ -7,7 +7,7 @@
 #
 
 # FPGA settings
-FPGA_PART = xc7a35tfgg484-1
+FPGA_PART = xc7a100tfgg484-2
 FPGA_TOP = ethernet_test_minimal
 FPGA_ARCH = artix7
 
@@ -23,7 +23,7 @@ SYN_FILES += $(sort $(shell find ../../src -type f \( -name '*.v' -o -name '*.sv
 XCI_FILES = $(sort $(shell find ../../src -type f -name '*.xci'))
 
 XDC_FILES += debug.xdc
-XDC_FILES += ../../../../constraints/ax7a035b.xdc
+XDC_FILES += ../../../../constraints/ax7102.xdc
 
 program: $(PROJECT).bit
 	echo "open_hw_manager" > program.tcl

rtl/ethernet-udp/tests/eth_minimal/debug.xdc

@@ -1,5 +1,8 @@
 # debug ILA
 
+connect_debug_port u_ila_0/clk [get_nets [list rgmii_rxc_IBUF_BUFG]]
+connect_debug_port dbg_hub/clk [get_nets rgmii_rxc_IBUF_BUFG]
+
 create_debug_core u_ila_0 ila
 set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_0]
 set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_0]
@@ -10,102 +13,102 @@ set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_0]
 set_property C_TRIGIN_EN false [get_debug_cores u_ila_0]
 set_property C_TRIGOUT_EN false [get_debug_cores u_ila_0]
 set_property port_width 1 [get_debug_ports u_ila_0/clk]
-connect_debug_port u_ila_0/clk [get_nets [list rgmii_rxc_IBUF_BUFG]]
+connect_debug_port u_ila_0/clk [get_nets [list e_gtxc_OBUF_BUFG]]
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe0]
-set_property port_width 9 [get_debug_ports u_ila_0/probe0]
-connect_debug_port u_ila_0/probe0 [get_nets [list {mac_test0/state[0]} {mac_test0/state[1]} {mac_test0/state[2]} {mac_test0/state[3]} {mac_test0/state[4]} {mac_test0/state[5]} {mac_test0/state[6]} {mac_test0/state[7]} {mac_test0/state[8]}]]
+set_property port_width 11 [get_debug_ports u_ila_0/probe0]
+connect_debug_port u_ila_0/probe0 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[0]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[1]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[2]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[3]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[4]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[5]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[6]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[7]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[8]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[9]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[10]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe1]
-set_property port_width 8 [get_debug_ports u_ila_0/probe1]
-connect_debug_port u_ila_0/probe1 [get_nets [list {arbi_inst/rx_buffer_inst/e10_100_rxd[0]} {arbi_inst/rx_buffer_inst/e10_100_rxd[1]} {arbi_inst/rx_buffer_inst/e10_100_rxd[2]} {arbi_inst/rx_buffer_inst/e10_100_rxd[3]} {arbi_inst/rx_buffer_inst/e10_100_rxd[4]} {arbi_inst/rx_buffer_inst/e10_100_rxd[5]} {arbi_inst/rx_buffer_inst/e10_100_rxd[6]} {arbi_inst/rx_buffer_inst/e10_100_rxd[7]}]]
+set_property port_width 4 [get_debug_ports u_ila_0/probe1]
+connect_debug_port u_ila_0/probe1 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp0/usedw[0]} {mac_test0/mac_top0/mac_tx0/udp0/usedw[1]} {mac_test0/mac_top0/mac_tx0/udp0/usedw[2]} {mac_test0/mac_top0/mac_tx0/udp0/usedw[3]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe2]
-set_property port_width 8 [get_debug_ports u_ila_0/probe2]
-connect_debug_port u_ila_0/probe2 [get_nets [list {arbi_inst/tx_buffer_inst/tx_wdata[0]} {arbi_inst/tx_buffer_inst/tx_wdata[1]} {arbi_inst/tx_buffer_inst/tx_wdata[2]} {arbi_inst/tx_buffer_inst/tx_wdata[3]} {arbi_inst/tx_buffer_inst/tx_wdata[4]} {arbi_inst/tx_buffer_inst/tx_wdata[5]} {arbi_inst/tx_buffer_inst/tx_wdata[6]} {arbi_inst/tx_buffer_inst/tx_wdata[7]}]]
+set_property port_width 6 [get_debug_ports u_ila_0/probe2]
+connect_debug_port u_ila_0/probe2 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp0/state[0]} {mac_test0/mac_top0/mac_tx0/udp0/state[1]} {mac_test0/mac_top0/mac_tx0/udp0/state[2]} {mac_test0/mac_top0/mac_tx0/udp0/state[3]} {mac_test0/mac_top0/mac_tx0/udp0/state[4]} {mac_test0/mac_top0/mac_tx0/udp0/state[5]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe3]
-set_property port_width 8 [get_debug_ports u_ila_0/probe3]
-connect_debug_port u_ila_0/probe3 [get_nets [list {arbi_inst/tx_buffer_inst/tx_rdata[0]} {arbi_inst/tx_buffer_inst/tx_rdata[1]} {arbi_inst/tx_buffer_inst/tx_rdata[2]} {arbi_inst/tx_buffer_inst/tx_rdata[3]} {arbi_inst/tx_buffer_inst/tx_rdata[4]} {arbi_inst/tx_buffer_inst/tx_rdata[5]} {arbi_inst/tx_buffer_inst/tx_rdata[6]} {arbi_inst/tx_buffer_inst/tx_rdata[7]}]]
+set_property port_width 9 [get_debug_ports u_ila_0/probe3]
+connect_debug_port u_ila_0/probe3 [get_nets [list {mac_test0/state[0]} {mac_test0/state[1]} {mac_test0/state[2]} {mac_test0/state[3]} {mac_test0/state[4]} {mac_test0/state[5]} {mac_test0/state[6]} {mac_test0/state[7]} {mac_test0/state[8]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe4]
 set_property port_width 16 [get_debug_ports u_ila_0/probe4]
-connect_debug_port u_ila_0/probe4 [get_nets [list {arbi_inst/tx_buffer_inst/tx_data_cnt[0]} {arbi_inst/tx_buffer_inst/tx_data_cnt[1]} {arbi_inst/tx_buffer_inst/tx_data_cnt[2]} {arbi_inst/tx_buffer_inst/tx_data_cnt[3]} {arbi_inst/tx_buffer_inst/tx_data_cnt[4]} {arbi_inst/tx_buffer_inst/tx_data_cnt[5]} {arbi_inst/tx_buffer_inst/tx_data_cnt[6]} {arbi_inst/tx_buffer_inst/tx_data_cnt[7]} {arbi_inst/tx_buffer_inst/tx_data_cnt[8]} {arbi_inst/tx_buffer_inst/tx_data_cnt[9]} {arbi_inst/tx_buffer_inst/tx_data_cnt[10]} {arbi_inst/tx_buffer_inst/tx_data_cnt[11]} {arbi_inst/tx_buffer_inst/tx_data_cnt[12]} {arbi_inst/tx_buffer_inst/tx_data_cnt[13]} {arbi_inst/tx_buffer_inst/tx_data_cnt[14]} {arbi_inst/tx_buffer_inst/tx_data_cnt[15]}]]
+connect_debug_port u_ila_0/probe4 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp_send_data_length[0]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[1]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[2]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[3]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[4]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[5]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[6]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[7]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[8]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[9]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[10]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[11]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[12]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[13]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[14]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe5]
-set_property port_width 16 [get_debug_ports u_ila_0/probe5]
-connect_debug_port u_ila_0/probe5 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp_send_data_length[0]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[1]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[2]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[3]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[4]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[5]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[6]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[7]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[8]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[9]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[10]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[11]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[12]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[13]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[14]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[15]}]]
+set_property port_width 12 [get_debug_ports u_ila_0/probe5]
+connect_debug_port u_ila_0/probe5 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[0]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[1]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[2]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[3]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[4]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[5]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[6]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[7]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[8]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[9]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[10]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[11]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe6]
-set_property port_width 12 [get_debug_ports u_ila_0/probe6]
-connect_debug_port u_ila_0/probe6 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[0]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[1]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[2]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[3]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[4]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[5]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[6]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[7]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[8]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[9]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[10]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[11]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe6]
+connect_debug_port u_ila_0/probe6 [get_nets [list {mac_test0/mac_top0/mac_tx0/ram_wr_data[0]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[1]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[2]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[3]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[4]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[5]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[6]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe7]
 set_property port_width 8 [get_debug_ports u_ila_0/probe7]
-connect_debug_port u_ila_0/probe7 [get_nets [list {mac_test0/mac_top0/mac_tx0/ram_wr_data[0]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[1]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[2]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[3]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[4]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[5]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[6]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[7]}]]
+connect_debug_port u_ila_0/probe7 [get_nets [list {mac_test0/mac_top0/mac_tx0/mac_tx_data[0]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[1]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[2]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[3]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[4]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[5]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[6]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe8]
-set_property port_width 8 [get_debug_ports u_ila_0/probe8]
-connect_debug_port u_ila_0/probe8 [get_nets [list {mac_test0/mac_top0/mac_tx0/mac_tx_data[0]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[1]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[2]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[3]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[4]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[5]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[6]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[7]}]]
+set_property port_width 6 [get_debug_ports u_ila_0/probe8]
+connect_debug_port u_ila_0/probe8 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp0/ck_state[0]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[1]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[2]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[3]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[4]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[5]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe9]
-set_property port_width 4 [get_debug_ports u_ila_0/probe9]
-connect_debug_port u_ila_0/probe9 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp0/usedw[0]} {mac_test0/mac_top0/mac_tx0/udp0/usedw[1]} {mac_test0/mac_top0/mac_tx0/udp0/usedw[2]} {mac_test0/mac_top0/mac_tx0/udp0/usedw[3]}]]
+set_property port_width 16 [get_debug_ports u_ila_0/probe9]
+connect_debug_port u_ila_0/probe9 [get_nets [list {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[0]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[1]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[2]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[3]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[4]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[5]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[6]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[7]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[8]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[9]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[10]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[11]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[12]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[13]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[14]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe10]
-set_property port_width 6 [get_debug_ports u_ila_0/probe10]
-connect_debug_port u_ila_0/probe10 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp0/state[0]} {mac_test0/mac_top0/mac_tx0/udp0/state[1]} {mac_test0/mac_top0/mac_tx0/udp0/state[2]} {mac_test0/mac_top0/mac_tx0/udp0/state[3]} {mac_test0/mac_top0/mac_tx0/udp0/state[4]} {mac_test0/mac_top0/mac_tx0/udp0/state[5]}]]
+set_property port_width 11 [get_debug_ports u_ila_0/probe10]
+connect_debug_port u_ila_0/probe10 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[0]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[1]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[2]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[3]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[4]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[5]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[6]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[7]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[8]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[9]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[10]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe11]
-set_property port_width 6 [get_debug_ports u_ila_0/probe11]
-connect_debug_port u_ila_0/probe11 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp0/ck_state[0]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[1]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[2]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[3]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[4]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[5]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe11]
+connect_debug_port u_ila_0/probe11 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[0]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[1]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[2]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[3]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[4]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[5]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[6]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe12]
 set_property port_width 16 [get_debug_ports u_ila_0/probe12]
-connect_debug_port u_ila_0/probe12 [get_nets [list {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[0]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[1]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[2]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[3]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[4]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[5]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[6]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[7]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[8]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[9]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[10]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[11]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[12]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[13]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[14]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[15]}]]
+connect_debug_port u_ila_0/probe12 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[0]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[1]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[2]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[3]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[4]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[5]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[6]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[7]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[8]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[9]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[10]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[11]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[12]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[13]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[14]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe13]
-set_property port_width 11 [get_debug_ports u_ila_0/probe13]
-connect_debug_port u_ila_0/probe13 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[0]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[1]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[2]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[3]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[4]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[5]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[6]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[7]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[8]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[9]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[10]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe13]
+connect_debug_port u_ila_0/probe13 [get_nets [list {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[0]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[1]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[2]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[3]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[4]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[5]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[6]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe14]
-set_property port_width 8 [get_debug_ports u_ila_0/probe14]
-connect_debug_port u_ila_0/probe14 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[0]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[1]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[2]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[3]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[4]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[5]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[6]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[7]}]]
+set_property port_width 16 [get_debug_ports u_ila_0/probe14]
+connect_debug_port u_ila_0/probe14 [get_nets [list {mac_test0/mac_top0/mac_rx0/ip_total_data_length[0]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[1]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[2]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[3]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[4]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[5]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[6]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[7]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[8]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[9]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[10]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[11]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[12]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[13]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[14]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe15]
-set_property port_width 16 [get_debug_ports u_ila_0/probe15]
-connect_debug_port u_ila_0/probe15 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[0]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[1]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[2]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[3]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[4]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[5]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[6]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[7]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[8]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[9]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[10]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[11]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[12]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[13]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[14]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[15]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe15]
+connect_debug_port u_ila_0/probe15 [get_nets [list {mac_test0/mac_top0/mac_rx0/mac_rx_datain[0]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[1]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[2]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[3]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[4]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[5]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[6]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe16]
 set_property port_width 8 [get_debug_ports u_ila_0/probe16]
-connect_debug_port u_ila_0/probe16 [get_nets [list {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[0]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[1]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[2]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[3]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[4]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[5]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[6]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[7]}]]
+connect_debug_port u_ila_0/probe16 [get_nets [list {arbi_inst/gmii_txd[0]} {arbi_inst/gmii_txd[1]} {arbi_inst/gmii_txd[2]} {arbi_inst/gmii_txd[3]} {arbi_inst/gmii_txd[4]} {arbi_inst/gmii_txd[5]} {arbi_inst/gmii_txd[6]} {arbi_inst/gmii_txd[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe17]
-set_property port_width 16 [get_debug_ports u_ila_0/probe17]
-connect_debug_port u_ila_0/probe17 [get_nets [list {mac_test0/mac_top0/mac_rx0/ip_total_data_length[0]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[1]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[2]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[3]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[4]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[5]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[6]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[7]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[8]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[9]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[10]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[11]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[12]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[13]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[14]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[15]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe17]
+connect_debug_port u_ila_0/probe17 [get_nets [list {arbi_inst/gmii_rxd[0]} {arbi_inst/gmii_rxd[1]} {arbi_inst/gmii_rxd[2]} {arbi_inst/gmii_rxd[3]} {arbi_inst/gmii_rxd[4]} {arbi_inst/gmii_rxd[5]} {arbi_inst/gmii_rxd[6]} {arbi_inst/gmii_rxd[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe18]
 set_property port_width 8 [get_debug_ports u_ila_0/probe18]
-connect_debug_port u_ila_0/probe18 [get_nets [list {mac_test0/mac_top0/mac_rx0/mac_rx_datain[0]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[1]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[2]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[3]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[4]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[5]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[6]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[7]}]]
+connect_debug_port u_ila_0/probe18 [get_nets [list {arbi_inst/e_txd[0]} {arbi_inst/e_txd[1]} {arbi_inst/e_txd[2]} {arbi_inst/e_txd[3]} {arbi_inst/e_txd[4]} {arbi_inst/e_txd[5]} {arbi_inst/e_txd[6]} {arbi_inst/e_txd[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe19]
-set_property port_width 11 [get_debug_ports u_ila_0/probe19]
-connect_debug_port u_ila_0/probe19 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[0]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[1]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[2]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[3]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[4]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[5]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[6]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[7]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[8]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[9]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[10]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe19]
+connect_debug_port u_ila_0/probe19 [get_nets [list {arbi_inst/e_rxd[0]} {arbi_inst/e_rxd[1]} {arbi_inst/e_rxd[2]} {arbi_inst/e_rxd[3]} {arbi_inst/e_rxd[4]} {arbi_inst/e_rxd[5]} {arbi_inst/e_rxd[6]} {arbi_inst/e_rxd[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe20]
 set_property port_width 8 [get_debug_ports u_ila_0/probe20]
-connect_debug_port u_ila_0/probe20 [get_nets [list {arbi_inst/gmii_txd[0]} {arbi_inst/gmii_txd[1]} {arbi_inst/gmii_txd[2]} {arbi_inst/gmii_txd[3]} {arbi_inst/gmii_txd[4]} {arbi_inst/gmii_txd[5]} {arbi_inst/gmii_txd[6]} {arbi_inst/gmii_txd[7]}]]
+connect_debug_port u_ila_0/probe20 [get_nets [list {arbi_inst/tx_buffer_inst/tx_wdata[0]} {arbi_inst/tx_buffer_inst/tx_wdata[1]} {arbi_inst/tx_buffer_inst/tx_wdata[2]} {arbi_inst/tx_buffer_inst/tx_wdata[3]} {arbi_inst/tx_buffer_inst/tx_wdata[4]} {arbi_inst/tx_buffer_inst/tx_wdata[5]} {arbi_inst/tx_buffer_inst/tx_wdata[6]} {arbi_inst/tx_buffer_inst/tx_wdata[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe21]
 set_property port_width 8 [get_debug_ports u_ila_0/probe21]
-connect_debug_port u_ila_0/probe21 [get_nets [list {arbi_inst/gmii_rxd[0]} {arbi_inst/gmii_rxd[1]} {arbi_inst/gmii_rxd[2]} {arbi_inst/gmii_rxd[3]} {arbi_inst/gmii_rxd[4]} {arbi_inst/gmii_rxd[5]} {arbi_inst/gmii_rxd[6]} {arbi_inst/gmii_rxd[7]}]]
+connect_debug_port u_ila_0/probe21 [get_nets [list {arbi_inst/tx_buffer_inst/tx_rdata[0]} {arbi_inst/tx_buffer_inst/tx_rdata[1]} {arbi_inst/tx_buffer_inst/tx_rdata[2]} {arbi_inst/tx_buffer_inst/tx_rdata[3]} {arbi_inst/tx_buffer_inst/tx_rdata[4]} {arbi_inst/tx_buffer_inst/tx_rdata[5]} {arbi_inst/tx_buffer_inst/tx_rdata[6]} {arbi_inst/tx_buffer_inst/tx_rdata[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe22]
-set_property port_width 8 [get_debug_ports u_ila_0/probe22]
-connect_debug_port u_ila_0/probe22 [get_nets [list {arbi_inst/e_txd[0]} {arbi_inst/e_txd[1]} {arbi_inst/e_txd[2]} {arbi_inst/e_txd[3]} {arbi_inst/e_txd[4]} {arbi_inst/e_txd[5]} {arbi_inst/e_txd[6]} {arbi_inst/e_txd[7]}]]
+set_property port_width 16 [get_debug_ports u_ila_0/probe22]
+connect_debug_port u_ila_0/probe22 [get_nets [list {arbi_inst/tx_buffer_inst/tx_data_cnt[0]} {arbi_inst/tx_buffer_inst/tx_data_cnt[1]} {arbi_inst/tx_buffer_inst/tx_data_cnt[2]} {arbi_inst/tx_buffer_inst/tx_data_cnt[3]} {arbi_inst/tx_buffer_inst/tx_data_cnt[4]} {arbi_inst/tx_buffer_inst/tx_data_cnt[5]} {arbi_inst/tx_buffer_inst/tx_data_cnt[6]} {arbi_inst/tx_buffer_inst/tx_data_cnt[7]} {arbi_inst/tx_buffer_inst/tx_data_cnt[8]} {arbi_inst/tx_buffer_inst/tx_data_cnt[9]} {arbi_inst/tx_buffer_inst/tx_data_cnt[10]} {arbi_inst/tx_buffer_inst/tx_data_cnt[11]} {arbi_inst/tx_buffer_inst/tx_data_cnt[12]} {arbi_inst/tx_buffer_inst/tx_data_cnt[13]} {arbi_inst/tx_buffer_inst/tx_data_cnt[14]} {arbi_inst/tx_buffer_inst/tx_data_cnt[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe23]
 set_property port_width 8 [get_debug_ports u_ila_0/probe23]
-connect_debug_port u_ila_0/probe23 [get_nets [list {arbi_inst/e_rxd[0]} {arbi_inst/e_rxd[1]} {arbi_inst/e_rxd[2]} {arbi_inst/e_rxd[3]} {arbi_inst/e_rxd[4]} {arbi_inst/e_rxd[5]} {arbi_inst/e_rxd[6]} {arbi_inst/e_rxd[7]}]]
+connect_debug_port u_ila_0/probe23 [get_nets [list {arbi_inst/rx_buffer_inst/e10_100_rxd[0]} {arbi_inst/rx_buffer_inst/e10_100_rxd[1]} {arbi_inst/rx_buffer_inst/e10_100_rxd[2]} {arbi_inst/rx_buffer_inst/e10_100_rxd[3]} {arbi_inst/rx_buffer_inst/e10_100_rxd[4]} {arbi_inst/rx_buffer_inst/e10_100_rxd[5]} {arbi_inst/rx_buffer_inst/e10_100_rxd[6]} {arbi_inst/rx_buffer_inst/e10_100_rxd[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe24]
 set_property port_width 1 [get_debug_ports u_ila_0/probe24]
@@ -149,11 +152,11 @@ connect_debug_port u_ila_0/probe33 [get_nets [list mac_test0/mac_top0/mac_tx0/ma
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe34]
 set_property port_width 1 [get_debug_ports u_ila_0/probe34]
-connect_debug_port u_ila_0/probe34 [get_nets [list mac_test0/mac_top0/mac_rx0/udp0/ram_wr_en]]
+connect_debug_port u_ila_0/probe34 [get_nets [list mac_test0/mac_top0/mac_tx0/ram_wr_en]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe35]
 set_property port_width 1 [get_debug_ports u_ila_0/probe35]
-connect_debug_port u_ila_0/probe35 [get_nets [list mac_test0/mac_top0/mac_tx0/ram_wr_en]]
+connect_debug_port u_ila_0/probe35 [get_nets [list mac_test0/mac_top0/mac_rx0/udp0/ram_wr_en]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe36]
 set_property port_width 1 [get_debug_ports u_ila_0/probe36]
@@ -185,4 +188,4 @@ connect_debug_port u_ila_0/probe42 [get_nets [list mac_test0/mac_top0/mac_tx0/up
 set_property C_CLK_INPUT_FREQ_HZ 300000000 [get_debug_cores dbg_hub]
 set_property C_ENABLE_CLK_DIVIDER false [get_debug_cores dbg_hub]
 set_property C_USER_SCAN_CHAIN 1 [get_debug_cores dbg_hub]
-connect_debug_port dbg_hub/clk [get_nets rgmii_rxc_IBUF_BUFG]
+connect_debug_port dbg_hub/clk [get_nets e_gtxc_OBUF_BUFG]

rtl/ethernet-udp/tests/eth_minimal/ethernet_test_minimal.v

@@ -1,134 +1,77 @@
-module ethernet_test_minimal
+`timescale 1ns / 1ps  
+//////////////////////////////////////////////////////////////////////////////////
+// Module Name:    ethernet_test 
+//////////////////////////////////////////////////////////////////////////////////
+module ethernet_test
 (
-input               sys_clk_p,                       //system clock positive
-input               sys_clk_n,                       //system clock negative 
-input               rst_n,                           //reset ,low active
-output [3:0]        led,                             //display network rate status
-output              e_reset,                         //phy reset
-output              e_mdc,                           //phy emdio clock
-inout               e_mdio,                          //phy emdio data
-output[3:0]         rgmii_txd,                       //phy data send
-output              rgmii_txctl,                     //phy data send control
-output              rgmii_txc,                       //Clock for sending data
-input[3:0]          rgmii_rxd,                       //recieve data
-input               rgmii_rxctl,                     //Control signal for receiving data
-input               rgmii_rxc                        //Clock for recieving data
+input                  sys_clk_p,                    // system clock positive
+input                  sys_clk_n,                    // system clock negative 
+input                   rst_n,                       // reset ,low active
+output [3:0]            led,                         // display network rate status
+output                  e_reset,                     // phy reset
+output                  e_mdc,                       // phy emdio clock
+inout                   e_mdio,                      // phy emdio data
+input	                e_rxc,                       // 125Mhz ethernet gmii rx clock
+input                   e_rxdv,                      // GMII recieving data valid
+input                   e_rxer,                      // GMII recieving data error                    
+input [7:0]             e_rxd,                       // GMII recieving data          
+
+input                   e_txc,                       // 25Mhz ethernet mii tx clock         
+output                  e_gtxc,                      // 125Mhz ethernet gmii tx clock  
+output                  e_txen,                      // GMII sending data valid    
+output                  e_txer,                      // GMII sending data error                   
+output[7:0]             e_txd                        // GMII sending data 
 );
-wire   [ 7:0]       gmii_txd;                       //gmii data                
-wire                gmii_tx_en;                     //gmii send enable
-wire                gmii_tx_er;
-wire                gmii_tx_clk;                    //gmii send clock
-wire                gmii_crs;
-wire                gmii_col;
-wire   [ 7:0]       gmii_rxd;                       //gmii recieving data                    
-wire                gmii_rx_dv;                     //gmii recieving data valid
-wire                gmii_rx_er;
-wire                gmii_rx_clk;                    //gmii recieve clock
-wire  [ 1:0]        speed_selection;                // 1x gigabit, 01 100Mbps, 00 10mbps
-wire                duplex_mode;                    // 1 full, 0 half
-wire                rgmii_rxcpll;
+wire                    sys_clk;                     //single end clock 
+wire  [31:0]            pack_total_len ;             //package length
+wire [1:0]              speed      ;                 //net speed select
+wire                    link       ;                 //link status
+wire                    erxdv    ;
+wire [7:0]              erxd      ;
+wire                    e_tx_en    ;
+wire [7:0]              etxd      ;
+wire                    e_rst_n    ;
+assign e_gtxc = e_rxc;	 
+assign e_reset = 1'b1; 
 
-wire  [31:0]        pack_total_len ;                //package length
+// generate single end clock
 
-wire [1:0]          speed      ;                    //net speed select
-wire                link       ;                    //link status
-wire                e_rx_dv    ;
-wire [7:0]          e_rxd      ;
-wire                e_tx_en    ;
-wire [7:0]          e_txd      ;
-wire                e_rst_n    ; 
-wire                sys_clk    ;
-
-
-assign duplex_mode = 1'b1;
-
-
-/*************************************************************************
-generate single end clock
-**************************************************************************/
 IBUFDS sys_clk_ibufgds
 (
-.O                              (sys_clk                 ),
-.I                              (sys_clk_p               ),
-.IB                             (sys_clk_n               )
-); 
-
-(* IODELAY_GROUP = "rgmii_idelay_group" *) // Specifies group name for associated IDELAYs/ODELAYs and IDELAYCTRL
-
-IDELAYCTRL IDELAYCTRL_inst (
-.RDY(),       // 1-bit output: Ready output
-.REFCLK(sys_clk), // 1-bit input: Reference clock input
-.RST(1'b0)        // 1-bit input: Active high reset input
-);
-/*************************************************************************
-GMII and RGMII data conversion
-****************************************************************************/
-util_gmii_to_rgmii util_gmii_to_rgmii_m0
-(
-.reset              (1'b0                   ),
-.rgmii_td           (rgmii_txd              ),
-.rgmii_tx_ctl       (rgmii_txctl            ),
-.rgmii_txc          (rgmii_txc              ),
-.rgmii_rd           (rgmii_rxd              ),
-.rgmii_rx_ctl       (rgmii_rxctl            ),
-.gmii_rx_clk        (gmii_rx_clk            ),
-.gmii_txd           (e_txd                  ),
-.gmii_tx_en         (e_tx_en                ),
-.gmii_tx_er         (1'b0                   ),
-.gmii_tx_clk        (gmii_tx_clk            ),
-.gmii_crs           (gmii_crs               ),
-.gmii_col           (gmii_col               ),
-.gmii_rxd           (gmii_rxd               ),
-.rgmii_rxc          (rgmii_rxc              ),//add
-.gmii_rx_dv         (gmii_rx_dv             ),
-.gmii_rx_er         (gmii_rx_er             ),
-.speed_selection    (2'b10                  ),
-.duplex_mode        (duplex_mode            )
-);
-/*************************************************************************
-Different conversion of GMII data according to different network speeds
-****************************************************************************/
-
-gmii_arbi arbi_inst
-(
-.clk                (gmii_tx_clk            ),
-.rst_n              (rst_n                  ),
-.speed              (2'b10                  ),  
-.link               (1'b1                  ), 
-.pack_total_len     (pack_total_len         ), 
-.e_rst_n            (e_rst_n                ),
-.gmii_rx_dv         (gmii_rx_dv             ),
-.gmii_rxd           (gmii_rxd               ),
-.gmii_tx_en         (gmii_tx_en             ),
-.gmii_txd           (gmii_txd               ), 
-.e_rx_dv            (e_rx_dv                ),
-.e_rxd              (e_rxd                  ),
-.e_tx_en            (e_tx_en                ),
-.e_txd              (e_txd                  ) 
+.O                      (sys_clk                 ),
+.I                      (sys_clk_p               ),
+.IB                     (sys_clk_n               )
 );
 
-
-/*************************************************************************
-Mac layer protocol test
-****************************************************************************/
+// Mac layer protocol test
 mac_test mac_test0
 (
-.gmii_tx_clk        (gmii_tx_clk            ),
-.gmii_rx_clk        (gmii_rx_clk            ) ,
-.rst_n              (e_rst_n                ),
-.pack_total_len     (pack_total_len         ),
-.gmii_rx_dv         (e_rx_dv                ),
-.gmii_rxd           (e_rxd                  ),
-.gmii_tx_en         (gmii_tx_en             ),
-.gmii_txd           (gmii_txd               )
+.gmii_tx_clk            (e_gtxc                 ),
+.gmii_rx_clk            (e_rxc                  ) ,
+.rst_n                  (e_rst_n                ),
+.pack_total_len         (pack_total_len         ),
+.gmii_rx_dv             (erxdv                  ),
+.gmii_rxd               (erxd                   ),
+.gmii_tx_en             (e_tx_en                ),
+.gmii_txd               (etxd                   )
 ); 
-/*************************************************************************
-Generate PHY reset signal
-****************************************************************************/
-reset reset_m0
+
+// Different conversion of GMII data according to different network speeds
+gmii_arbi arbi_inst
 (
-.clk                (sys_clk                ),
-.key1               (rst_n                  ),
-.rst_n              (e_reset                )
+.clk                    (e_gtxc                 ),
+.rst_n                  (rst_n                  ),
+.speed                  (2'b10                  ),  
+.link                   (1'b1                   ), 
+.pack_total_len         (pack_total_len         ), 
+.e_rst_n                (e_rst_n                ),
+.gmii_rx_dv             (e_rxdv                 ),
+.gmii_rxd               (e_rxd                  ),
+.gmii_tx_en             (e_tx_en                ),
+.gmii_txd               (etxd                   ), 
+.e_rx_dv                (erxdv                  ),
+.e_rxd                  (erxd                   ),
+.e_tx_en                (e_txen                 ),
+.e_txd                  (e_txd                  ) 
 );
 endmodule

rtl/generator/README.md

@@ -0,0 +1,91 @@
+# Генератор
+
+Модуль выполняет задачу формирования последовательности импульсов заданной амплитуды, длительности и периода.  
+Дополнительно реализован механизм синхронизации с модулем сэмплера через сигналы `sample_req` и `sample_done`, позволяющий запускать сбор данных для каждого импульса и ожидать подтверждения завершения выборки перед переходом к следующему импульсу.
+
+---
+
+## Список параметров
+
+### DATA_WIDTH
+Ширина выходных данных генератора.
+
+### ZERO_LEVEL
+Уровень сигнала в состоянии отсутствия импульса (базовый уровень сигнала).
+
+Типовые значения:
+
+- `8192` — середина диапазона ЦАП
+- `0` — нулевой уровень
+
+---
+
+## Список входных портов
+
+### clk_in
+Сигнал тактирования модуля.
+
+### rst
+Сброс модуля и остановка генерации.
+
+### start
+Сигнал запуска последовательности импульсов.
+
+При его активации модуль фиксирует все входные параметры и начинает генерацию.
+
+Повторный запуск во время активной генерации блокируется с помощью внутреннего сигнала `enable`.
+
+### [31:0] pulse_width
+Длительность активной части импульса (в тактах).
+
+### [31:0] pulse_period
+Полный период импульса (в тактах).
+
+### [DATA_WIDTH-1:0] pulse_height
+Амплитуда импульса.
+
+### [15:0] pulse_num
+Количество импульсов, которое необходимо сгенерировать.
+
+### sample_done
+Сигнал подтверждения от сэмплера о завершении выборки данных для текущего импульса.
+
+---
+
+## Список выходных портов
+
+pulse
+Выходной сигнал разрешения записи сигнала 
+
+[DATA_WIDTH-1:0] pulse_height_out
+Выходное значение амплитуды сигнала.
+
+Во время активной части импульса равно `pulse_height`, вне импульса — `ZERO_LEVEL`.
+
+sample_req
+Сигнал запроса на запуск выборки в модуле сэмплера.
+
+Поднимается в начале каждого нового импульса и снимается после получения `sample_done`.
+
+---
+
+## Логика работы
+
+После прихода сигнала `start` модуль:
+
+- фиксирует входные параметры генерации
+- сбрасывает внутренние счетчики
+- поднимает `enable = 1`
+- формирует первый `sample_req`
+
+После этого начинается последовательная генерация импульсов.
+
+---
+
+## Симуляция
+Тесты запускаются автоматически через make.
+```
+cd tests
+make sim
+```
+При успешном завершении теста высвечивается "ALL PASSED".

rtl/generator/src/generator.sv

@@ -0,0 +1,105 @@
+`timescale 1ns / 1ps
+
+
+module generator
+#(
+    parameter DATA_WIDTH = 14,
+    parameter ZERO_LEVEL = 8192 // 8192 or 0
+    )
+(
+    input clk_in,
+    input rst,
+    input start,
+    input [31:0]           pulse_width,
+    input [31:0]           pulse_period,
+    input [DATA_WIDTH-1:0] pulse_height,
+    input [15:0]           pulse_num,
+    input sample_done,
+    
+    output pulse,
+    output[DATA_WIDTH-1:0] pulse_height_out,
+    output logic sample_req
+    
+    );
+    
+  (* MARK_DEBUG="true" *)  logic [DATA_WIDTH-1:0] pulse_height_reg, pulse_height_out_reg;
+    
+  (* MARK_DEBUG="true" *)  logic [31:0] pulse_width_reg, pulse_period_reg;
+  (* MARK_DEBUG="true" *)  logic [15:0] pulse_num_reg;
+    
+  (* MARK_DEBUG="true" *)  logic enable;
+  (* MARK_DEBUG="true" *)  logic [15:0] cnt_pulse_num;
+  (* MARK_DEBUG="true" *)  logic [31:0] cnt_period;
+
+    
+    always @(posedge clk_in) begin
+        if (rst) begin
+            pulse_height_reg <= ZERO_LEVEL;
+            pulse_height_out_reg <= ZERO_LEVEL;
+            pulse_width_reg <= '0;
+            pulse_period_reg <= '0;
+            pulse_num_reg <= '0;
+            enable <= 0;
+            cnt_pulse_num <= '0;
+            cnt_period <= '0;
+            sample_req <= 0;
+        end else begin
+            if (start & !enable) begin
+                enable <= 1'b1;
+                cnt_pulse_num <= '0;
+                cnt_period <= '0;
+
+                sample_req <= 1;
+                
+                pulse_width_reg <= pulse_width;
+                pulse_period_reg <= pulse_period;
+                pulse_num_reg <= pulse_num;
+                pulse_height_reg <= pulse_height;
+            end 
+            if (enable) begin
+
+                if (!sample_req && (cnt_period == 0)) begin
+                    pulse_height_out_reg <= ZERO_LEVEL;
+                    if (sample_done) begin
+                        sample_req <= 1'b0;
+                    end
+                    
+                    if (!sample_done) begin
+                        if (cnt_pulse_num == pulse_num_reg - 1) begin
+                            enable <= 1'b0;
+                        end
+                        else begin
+                            cnt_pulse_num <= cnt_pulse_num + 1;
+                            sample_req <= 1'b1;
+                            cnt_period <= 1;
+                        end
+                    end
+                end
+                 else begin
+                        
+                    if (cnt_period <= pulse_width_reg) begin
+                        pulse_height_out_reg <= pulse_height_reg;
+                    end else begin
+                        pulse_height_out_reg <= ZERO_LEVEL;
+                    end
+                    if (cnt_period == pulse_period_reg) begin
+                        cnt_period <= 0;
+                    end else begin
+                        cnt_period <= cnt_period + 1;
+                    end
+                    if (sample_req && sample_done) begin
+                        sample_req <= 0;
+                    end
+                end
+            end
+        end
+    end
+
+     OBUF OBUF_pulse_clk (
+        .I(clk_in),
+        .O(pulse)
+    );
+    
+    assign pulse_height_out = pulse_height_out_reg;
+    
+endmodule

rtl/generator/tests/generator_tb.sv

@@ -0,0 +1,114 @@
+`timescale 1ns / 1ps
+
+module generator_tb;
+
+    parameter DATA_WIDTH = 14;
+    parameter ZERO_LEVEL = 8192;
+    parameter CLK_PERIOD = 16;
+
+    logic clk;
+    logic rst;
+    logic start;
+
+    logic [31:0] pulse_width;
+    logic [31:0] pulse_period;
+    logic [DATA_WIDTH-1:0] pulse_height;
+    logic [15:0] pulse_num;
+
+    logic pulse;
+    logic [DATA_WIDTH-1:0] pulse_height_out;
+
+    // DUT
+    generator #(
+        .DATA_WIDTH(DATA_WIDTH)
+    ) dut (
+        .clk_in(clk),
+        .rst(rst),
+        .start(start),
+        .pulse_width(pulse_width),
+        .pulse_period(pulse_period),
+        .pulse_height(pulse_height),
+        .pulse_num(pulse_num),
+        .pulse(pulse),
+        .pulse_height_out(pulse_height_out)
+    );
+
+    // Clock
+    initial begin
+        clk = 0;
+        forever #(CLK_PERIOD/2) clk = ~clk;
+    end
+
+    initial begin
+        $display("\n=== GENERATOR TEST ===\n");
+
+        rst = 1;
+        start = 0;
+
+        pulse_width  = 0;
+        pulse_period = 0;
+        pulse_height = 0;
+        pulse_num    = 0;
+
+        repeat(5) @(posedge clk);
+        rst = 0;
+
+        // --- Test 1 ---
+        // 3 clk 1, 5 clk 0,  4 pulses
+       repeat(2) @(posedge clk);
+        pulse_width  = 3;
+        pulse_period = 8;
+        pulse_num    = 4;
+        pulse_height = 14'h3FF;
+        start = 1;
+
+       repeat(1) @(posedge clk);
+        start = 0;
+
+        repeat(50) @(posedge clk);
+
+        // --- Test 2 ---
+        $display("\n--- SECOND RUN ---\n");
+
+        @(posedge clk);
+        pulse_width  = 2;
+        pulse_period = 5;
+        pulse_num    = 3;
+        pulse_height = 14'h155;
+        start = 1;
+
+        @(posedge clk);
+        start = 0;
+
+        repeat(40) @(posedge clk);
+        
+        pulse_width  = 3;
+        pulse_period = 8;
+        pulse_num    = 4;
+        pulse_height = 14'h3FF;
+        start = 1;
+
+       repeat(1) @(posedge clk);
+        start = 0;
+        
+        repeat(5) @(posedge clk);
+        start = 1;
+        pulse_height = 14'h155;
+
+       repeat(1) @(posedge clk);
+        start = 0;
+        
+        repeat(50) @(posedge clk);
+
+
+        $display("\n=== TEST FINISHED ===");
+        $finish;
+    end
+
+    // Display
+    always @(posedge clk) begin
+        $display("t=%0t | pulse=%0b | height=%h",
+                  $time, pulse, pulse_height_out);
+    end
+
+endmodule

rtl/sampler/README.md

@@ -0,0 +1,144 @@
+# Сэмплер
+
+Модуль выполняет задачу сбора данных с выхода АЦП, их обработки, упаковки и передачи дальше с помощью AXI Stream интерфейса.  
+Дополнительно реализован механизм синхронизации с внешним генератором через сигналы `sample_req` и `sample_done`, позволяющий запускать сбор строго по запросу и подтверждать завершение выборки.
+
+---
+
+## Список параметров
+
+DATA_WIDTH
+Ширина входных данных, получаемых с АЦП.
+
+PACK_FACTOR
+Количество отсчетов, собираемых в один выходной пакет.
+
+PROCESS_MODE
+Режим интерпретации входного кода:
+
+- `0` — прямой код
+- `1` — дополнительный код
+
+---
+
+## Список входных портов
+
+clk_in
+Сигнал тактирования выходного интерфейса.
+
+rst
+Сброс модуля и остановка работы.
+
+[DATA_WIDTH-1:0] data_in
+Входной сигнал с АЦП.
+
+out_of_range
+Флаг выхода значений данных за допустимый диапазон:
+
+- `0` — данные валидны
+- `1` — данные невалидны и игнорируются
+
+[31:0] smp_num
+Количество валидных отсчетов, которое необходимо собрать после получения запроса на выборку.
+
+sample_req
+Сигнал запроса на запуск выборки.  
+При его активации модуль начинает сбор данных и переходит в активное состояние (`enable = 1`).
+
+---
+
+## Список выходных портов
+
+[DATA_WIDTH*PACK_FACTOR-1:0] m_axis_tdata
+Урезанный AXI Stream формат, выходные данные.  
+Ширина шины определяется как произведение битности данных и фактора упаковки.
+
+m_axis_tvalid
+Урезанный AXI Stream формат, сигнал валидности выходных данных.  
+Формируется при готовности очередного пакета.
+
+sample_done
+Сигнал завершения выборки.  
+Поднимается после того, как модуль собрал количество валидных отсчетов, равное `smp_num`.
+
+---
+
+## Логика работы
+
+На каждом такте принимаются:
+
+- `data_in` — значение АЦП
+- `out_of_range` — флаг допустимости значения
+
+Если `out_of_range = 1`, данные считаются невалидными, игнорируются и не попадают во внутренний буфер.
+
+Если `out_of_range = 0`, данные считаются корректными и используются для дальнейшей обработки.
+
+---
+
+### Преобразование данных
+
+Если `PROCESS_MODE = 1`, входные данные интерпретируются как дополнительный код и преобразуются перед упаковкой.
+
+Если `PROCESS_MODE = 0`, данные передаются без преобразования (прямой код).
+
+---
+
+### Запуск выборки
+
+Сбор данных начинается только после прихода сигнала `sample_req`.
+
+При этом:
+
+- фиксируется значение `smp_num`
+- внутренний счетчик собранных отсчетов обнуляется
+- модуль переходит в активное состояние (`enable = 1`)
+
+Пока `enable = 1`, модуль принимает только валидные отсчеты и считает их.
+
+---
+
+### Упаковка данных
+
+Внутренний буфер заполняется до количества данных, равного `PACK_FACTOR`.
+
+#### Если `PACK_FACTOR = 1`
+
+Каждый валидный отсчет сразу формирует выходной пакет:
+
+- данные передаются в `m_axis_tdata`
+- формируется импульс `m_axis_tvalid`
+
+#### Если `PACK_FACTOR > 1`
+
+Данные последовательно накапливаются во внутреннем сдвиговом буфере.
+
+Когда буфер полностью заполнен:
+
+- формируется пакет упакованных данных
+- поднимается `m_axis_tvalid`
+
+После этого начинается сбор следующего пакета.
+
+---
+
+### Завершение выборки
+
+Когда количество собранных валидных отсчетов достигает значения `smp_num`:
+
+- поднимается сигнал `sample_done`
+- внутренние счетчики сбрасываются
+- буфер очищается
+- `enable` сбрасывается в `0`
+
+Это означает полное завершение текущего цикла выборки.
+
+---
+
+## Симуляция
+Тесты запускаются автоматически через make.
+```
+cd tests
+make sim
+```
+При успешном завершении теста высвечивается "ALL PASSED".

rtl/sampler/src/sampler.sv

@@ -0,0 +1,154 @@
+`timescale 1ns / 1ps
+
+
+
+module sampler
+#(
+    parameter DATA_WIDTH = 12,
+    parameter PACK_FACTOR = 1,
+    parameter PROCESS_MODE = 0
+    )
+(
+    input clk_in,
+    input rst,
+    input [DATA_WIDTH-1:0] data_in,
+    input out_of_range,
+    input [31:0] smp_num,
+    input sample_req,
+
+    output logic [DATA_WIDTH*PACK_FACTOR-1:0]  m_axis_tdata,
+    output logic                              m_axis_tvalid,
+    output logic sample_done
+    );
+   (* MARK_DEBUG="true" *) logic [DATA_WIDTH-1:0] data_converted;
+   (* MARK_DEBUG="true" *) logic out_of_range_reg;
+    (* MARK_DEBUG="true" *) logic [31:0] smp_num_reg, cnt_smp_num;
+   (* MARK_DEBUG="true" *) logic enable;
+    
+    generate
+       if (PROCESS_MODE) begin 
+
+        always @(posedge clk_in) begin
+            if (rst) begin
+                data_converted   <= '0;
+                out_of_range_reg <= 0;
+            end
+            else begin
+                out_of_range_reg <= out_of_range;
+                if (data_in == {1'b1, {(DATA_WIDTH-1){1'b0}}})
+                    data_converted <= data_in;
+                else
+                    data_converted <= data_in[DATA_WIDTH-1] ?{1'b1, (~data_in[DATA_WIDTH-2:0] + 1'b1)}:data_in;
+            end
+        end
+     end else begin
+        always @(posedge clk_in) begin
+            if (rst) begin
+                data_converted   <= '0;
+                out_of_range_reg <= 0;
+            end
+            else begin
+                out_of_range_reg <= out_of_range;
+                data_converted   <= data_in;
+            end
+        end
+     end
+    endgenerate
+         
+  (* MARK_DEBUG="true" *)  logic [DATA_WIDTH*PACK_FACTOR-1:0] buffer;
+  (* MARK_DEBUG="true" *)  logic buffer_ready;
+
+    logic [$clog2(PACK_FACTOR):0] cnt;
+    
+    generate
+      if (PACK_FACTOR == 1) begin
+        always @(posedge clk_in) begin
+            if (rst) begin
+                buffer       <= '0;
+                buffer_ready <= 0;
+                cnt_smp_num <= '0;
+                smp_num_reg <= '0;
+                enable <= '0;
+                sample_done <= 0;
+            end
+            else begin
+                buffer_ready <= 0;
+                if (sample_done && !sample_req) begin
+                    sample_done <= 1'b0;
+                end
+                if (!enable && sample_req && !sample_done) begin
+                    enable      <= 1;
+                    cnt_smp_num <= 0;
+                    smp_num_reg <= smp_num;
+                end
+                if (enable) begin
+                    if (!out_of_range_reg) begin
+                        if (cnt_smp_num != smp_num_reg) begin
+                            buffer       <= data_converted;
+                            buffer_ready <= 1;
+                            cnt_smp_num <= cnt_smp_num +1;
+                        end 
+                        else begin
+                            cnt_smp_num <= '0;
+                            sample_done <= 1'b1;
+                            buffer_ready <= 0;
+                            buffer <= '0;
+                            enable <= 0;
+                        end
+                    end
+                end
+            end
+        end
+      end  else begin
+        always @(posedge clk_in) begin
+            if (rst) begin
+                buffer <= '0;
+                cnt <= '0; //
+                buffer_ready <= 0;
+                cnt_smp_num <= '0;
+                smp_num_reg <= '0;
+                enable <= 0;
+                sample_done <= 0;
+            end
+            else begin
+                buffer_ready <= 0;
+                if (sample_done && !sample_req) begin
+                    sample_done <= 1'b0;
+                end
+                if (!enable && sample_req && !sample_done) begin
+                    enable      <= 1;
+                    cnt_smp_num <= 0;
+                    smp_num_reg <= smp_num;
+                end
+                if (enable) begin
+                    if (!out_of_range_reg) begin
+                        if (cnt_smp_num != smp_num_reg) begin
+                            cnt_smp_num <= cnt_smp_num +1;
+                            buffer <= {buffer[DATA_WIDTH*(PACK_FACTOR-1)-1:0], data_converted};
+                            if (cnt == PACK_FACTOR-1) begin
+                                cnt <= 0;
+                                buffer_ready <= 1;
+                                buffer <= {buffer[DATA_WIDTH*(PACK_FACTOR-1)-1:0], data_converted};
+                            end
+                            else begin
+                                cnt <= cnt + 1;
+                            end
+                        end 
+                        else begin
+                            sample_done <= 1'b1;
+                            cnt_smp_num <= '0;
+                            buffer_ready <= 0;
+                            buffer <= '0;
+                            enable <= 0;
+                        end
+                    end
+                end
+            end
+        end
+      end
+    endgenerate
+    
+    assign m_axis_tdata = buffer;
+    assign m_axis_tvalid = buffer_ready;
+    
+endmodule

rtl/sampler/tests/Makefile

@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: MIT
+#
+# Copyright (c) 2025 FPGA Ninja, LLC
+#
+# Authors:
+# - Alex Forencich
+#
+
+# FPGA settings
+FPGA_PART = xc7a35tfgg484-1
+FPGA_TOP = sampler
+FPGA_ARCH = artix7
+
+RTL_DIR = ../src
+
+
+include ../../../scripts/vivado.mk
+
+SYN_FILES += $(sort $(shell find ../src -type f \( -name '*.v' -o -name '*.sv' \)))
+
+XCI_FILES = $(sort $(shell find ../src -type f -name '*.xci'))
+
+XDC_FILES += ../../../constraints/ax7a035b.xdc
+
+SYN_FILES += sampler_main_tb.sv
+SIM_TOP = sampler_tb
+
+
+program: $(PROJECT).bit
+	echo "open_hw_manager" > program.tcl
+	echo "connect_hw_server" >> program.tcl
+	echo "open_hw_target" >> program.tcl
+	echo "current_hw_device [lindex [get_hw_devices] 0]" >> program.tcl
+	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> program.tcl
+	echo "set_property PROGRAM.FILE {$(PROJECT).bit} [current_hw_device]" >> program.tcl
+	echo "program_hw_devices [current_hw_device]" >> program.tcl
+	echo "exit" >> program.tcl
+	vivado -nojournal -nolog -mode batch -source program.tcl
+
+$(PROJECT).mcs $(PROJECT).prm: $(PROJECT).bit
+	echo "write_cfgmem -force -format mcs -size 16 -interface SPIx4 -loadbit {up 0x0000000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
+	echo "exit" >> generate_mcs.tcl
+	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
+	mkdir -p rev
+	COUNT=100; \
+	while [ -e rev/$*_rev$$COUNT.bit ]; \
+	do COUNT=$$((COUNT+1)); done; \
+	COUNT=$$((COUNT-1)); \
+	for x in .mcs .prm; \
+	do cp $*$$x rev/$*_rev$$COUNT$$x; \
+	echo "Output: rev/$*_rev$$COUNT$$x"; done;

rtl/sampler/tests/sampler_main_tb.sv

@@ -0,0 +1,132 @@
+`timescale 1ns / 1ps
+
+module sampler_tb;
+
+    parameter DATA_WIDTH   = 12;
+    parameter PROCESS_MODE = 0;
+    parameter CLK_PERIOD   = 15.3846;
+    parameter TEST_NUM     = 1000;
+
+    logic clk;
+    logic rst;
+
+    logic [DATA_WIDTH-1:0] data_in;
+    logic out_of_range;
+
+    logic [DATA_WIDTH-1:0] m_axis_tdata;
+    logic m_axis_tvalid;
+
+    integer errors = 0;
+
+    sampler #(
+        .DATA_WIDTH(DATA_WIDTH),
+        .PROCESS_MODE(PROCESS_MODE)
+    ) dut (
+        .clk_in(clk),
+        .rst(rst),
+        .data_in(data_in),
+        .out_of_range(out_of_range),
+        .m_axis_tdata(m_axis_tdata),
+        .m_axis_tvalid(m_axis_tvalid)
+    );
+
+    initial begin
+        clk = 0;
+        forever #(CLK_PERIOD/2) clk = ~clk;
+    end
+
+    function automatic [DATA_WIDTH-1:0] ref_convert(input [DATA_WIDTH-1:0] din);
+        if (PROCESS_MODE == 0)
+            return din;
+        else if (din == {1'b1, {(DATA_WIDTH-1){1'b0}}})
+            return din;
+        else
+            return din[DATA_WIDTH-1] ?
+                   {1'b1, (~din[DATA_WIDTH-2:0] + 1'b1)} :
+                   din;
+    endfunction
+
+    task send(input [DATA_WIDTH-1:0] word, input bit oor);
+        @(posedge clk);
+        data_in      <= word;
+        out_of_range <= oor;
+    endtask
+
+    logic [DATA_WIDTH-1:0] exp_d0, exp_d1, exp_d2;
+    logic oor_d0, oor_d1, oor_d2;
+
+    initial begin
+        $display("\n=== RANDOM SAMPLER TEST===\n");
+
+        rst = 1;
+        data_in = 0;
+        out_of_range = 0;
+
+        exp_d0 = 0;
+        exp_d1 = 0;
+        exp_d2 = 0;
+
+        oor_d0 = 1;
+        oor_d1 = 1;
+        oor_d2 = 1;
+
+        repeat(5) @(posedge clk);
+        rst = 0;
+        repeat(2) @(posedge clk);
+
+        repeat (TEST_NUM) begin
+            logic [DATA_WIDTH-1:0] rand_data;
+            bit rand_oor;
+
+            rand_data = $urandom_range(0, (1 << DATA_WIDTH) - 1);
+            rand_oor  = ($urandom_range(0, 99) < 20);
+
+            @(negedge clk);
+
+            if (!oor_d2) begin
+                if (m_axis_tvalid !== 1) begin
+                    $display("ERROR: valid=0");
+                    errors++;
+                end
+
+                if (m_axis_tdata !== exp_d2) begin
+                    $display("ERROR: data mismatch");
+                    $display(" expected = %h", exp_d2);
+                    $display(" got      = %h", m_axis_tdata);
+                    errors++;
+                end
+            end
+
+            send(rand_data, rand_oor);
+
+            exp_d2 = exp_d1;
+            exp_d1 = exp_d0;
+            exp_d0 = ref_convert(rand_data);
+
+            oor_d2 = oor_d1;
+            oor_d1 = oor_d0;
+            oor_d0 = rand_oor;
+        end
+
+        @(posedge clk);
+
+
+        if (!oor_d2) begin
+        
+            if (m_axis_tdata !== exp_d2) begin
+                $display("ERROR: final mismatch");
+                $display(" expected = %h", exp_d2);
+                $display(" got      = %h", m_axis_tdata);
+                errors++;
+            end
+        end
+
+        if (errors == 0)
+            $display("\n========== ALL PASSED ==========\n");
+        else
+            $display("\n========== FAILED: %0d errors ==========\n", errors);
+
+        $finish;
+    end
+
+endmodule

scripts/build.sh

@@ -1 +0,0 @@
-# mock

scripts/vivado.mk

@@ -109,7 +109,34 @@ create_project.tcl: Makefile $(XCI_FILES) $(IP_TCL_FILES)
 	echo "add_files -fileset constrs_1 $(XDC_FILES)" >> $@
 	for x in $(XCI_FILES); do echo "import_ip $$x" >> $@; done
 	for x in $(IP_TCL_FILES); do echo "source $$x" >> $@; done
+
+	echo 'set ips [get_ips -quiet *]' >> $@
+	echo 'if {[llength $$ips] > 0} {' >> $@
+	echo '  puts "INFO: Checking IP status..."' >> $@
+	echo '  report_ip_status -file ip_status_before_upgrade.rpt' >> $@
+	echo '  set locked_ips [get_ips -quiet -filter {IS_LOCKED == 1}]' >> $@
+	echo '  if {[llength $$locked_ips] > 0} {' >> $@
+	echo '    puts "INFO: Upgrading locked IP cores: $$locked_ips"' >> $@
+	echo '    upgrade_ip $$locked_ips' >> $@
+	echo '  }' >> $@
+	echo '  set ip_files [get_files -quiet *.xci]' >> $@
+	echo '  if {[llength $$ip_files] > 0} {' >> $@
+	echo '    puts "INFO: Generating IP output products..."' >> $@
+	echo '    generate_target all $$ip_files' >> $@
+	echo '    export_ip_user_files -of_objects $$ip_files -no_script -sync -force -quiet' >> $@
+	echo '  }' >> $@
+	echo '  report_ip_status -file ip_status_after_upgrade.rpt' >> $@
+	echo '}' >> $@
+
 	for x in $(CONFIG_TCL_FILES); do echo "source $$x" >> $@; done
+	
+	if [ -n "$(TB_FILES)" ]; then \
+		echo "add_files -fileset sim_1 defines.v $(TB_FILES)" >> $@; \
+		echo "set_property top $(SIM_TOP) [get_filesets sim_1]" >> $@; \
+		echo "set_property top_lib xil_defaultlib [get_filesets sim_1]" >> $@; \
+	fi
+	echo "update_compile_order -fileset sources_1" >> $@
+	echo "update_compile_order -fileset sim_1" >> $@
 
 # source config TCL scripts if any source file has changed
 update_config.tcl: $(CONFIG_TCL_FILES) $(SYN_FILES) $(INC_FILES) $(XDC_FILES)
@@ -170,12 +197,11 @@ gen_ip:
 
 sim: $(PROJECT).xpr gen_ip
 	echo "open_project $(PROJECT).xpr" > run_sim.tcl
-	echo "add_files -fileset sim_1 $(TB_FILES)" >> run_sim.tcl
-	echo "set_property top $(SIM_TOP) [get_filesets sim_1]" >> run_sim.tcl
 	echo "update_compile_order -fileset sources_1" >> run_sim.tcl
 	echo "update_compile_order -fileset sim_1" >> run_sim.tcl
 	echo "launch_simulation" >> run_sim.tcl
-	echo "run all" >> run_sim.tcl
+	echo "run 10000 us" >> run_sim.tcl
+	echo "quit" >> run_sim.tcl
 	vivado -mode batch -source run_sim.tcl
 
 simclean:

software/README.md

@@ -0,0 +1,20 @@
+# Software
+
+Просто скрипт на питоне, для отправки команд через ethernet и для приема и простой визуализации данных.
+
+## Использование
+Справка:
+
+```python3 --help```
+
+Положительный импульс:
+
+```python3 console.py --pulse_width 3500 --pulse_period 20000 --pulse_height 15000 --pulse_num 550 --dac-bits 14```
+
+Отрицательный импульс:
+
+```python3 console.py --pulse_width 15000 --pulse_period 20000 --pulse_height 1500 --pulse_num 550 --dac-bits 14```
+
+## Ограничения
+Максимальный pulse_period считается как аппаратный N_MAX * WINDOW_SIZE * adc_dac_ratio, в базовой конфигурации это 512000. Максимальный pulse_num зависит от подаваемых значений и от битности аккумулятора (по умолчанию - 32), с учетом усреднений по WINDOW_SIZE это получается что-то около 2^14 накоплений.
+

software/console.py

@@ -0,0 +1,191 @@
+import argparse
+import socket
+import math
+import matplotlib.pyplot as plt
+
+adc_dac_ratio = 0.52
+
+
+def run_debug(args, sock):
+    """Debug run: send fixed values to test eth+ctrl on fpga."""
+    print(f"DEBUG MODE: ip={args.ip} send_port={args.send_port}")
+
+    dest = (args.ip, args.send_port)
+
+    # reset
+    sock.sendto(0x0f00.to_bytes(2), dest)
+    print("Sent soft_reset!")
+
+    # config data
+    sock.sendto(format_ctrl_data(0x12345678, 0x9abcdef0,
+                0x0bea, 0xdead, dac_bits=args.dac_bits), dest)
+    print("Config data sent!")
+
+    sock.sendto(0xf000.to_bytes(2), dest)
+    print("Sent start!")
+
+
+def format_ctrl_data(pulse_width: int, pulse_period: int,
+                     pulse_height: int, pulse_num: int, args, dac_bits: int = 16) -> bytes:
+    """Format data packet for set_data command."""
+    output = bytearray()
+
+    output += 0b10001000.to_bytes(1, 'little')
+
+    pulse_period_adc = (int(pulse_period * adc_dac_ratio) //
+                        args.window_size) * args.window_size
+    print(pulse_period_adc)
+
+    # no negative please
+    assert pulse_width > 0, "pulse_width should be positive"
+    assert pulse_period > 0, "pulse_period should be positive"
+    assert pulse_num > 0, "pulse_num should be positive"
+    assert pulse_height > 0, "pulse_height should be positive"
+
+    # overflow check
+    assert pulse_width < 2**32-1, "pulse_width too high"
+    assert pulse_period < 2**32-1, "pulse_period too high"
+    assert pulse_num < 2**16-1, "pulse_num too high"
+    assert pulse_height < 2**dac_bits-1, "pulse_height too high"
+
+    output += pulse_width.to_bytes(4, 'little')
+    output += pulse_period.to_bytes(4, 'little')
+    output += pulse_num.to_bytes(2, 'little')
+    output += pulse_height.to_bytes(2, 'little')
+    output += pulse_period_adc.to_bytes(4, 'little')
+
+    assert len(output) == 17, "Config data should be 128 bits + 8 bit header"
+    return output
+
+
+def verify_args(args):
+    """check args are non zero and in bound, request from user if needed"""
+    if args.pulse_width == 0:
+        args.pulse_width = int(input("pulse_width: "))
+
+    if args.pulse_period == 0:
+        args.pulse_period = int(input("pulse_period: "))
+
+    if args.pulse_num == 0:
+        args.pulse_num = int(input("pulse_num: "))
+
+    if args.pulse_height == 0:
+        args.pulse_height = int(input("pulse_height: "))
+
+
+def recv_data(args, sock) -> list:
+    # calculate count & size
+    packet_count = math.ceil(
+        ((adc_dac_ratio * args.pulse_period) / args.window_size * args.data_width) / args.packet_size)
+    print(packet_count)
+
+    recv_buf = []
+
+    try:
+        for pkt_cnt in range(packet_count):
+            try:
+                data, address = sock.recvfrom(65536)
+
+                if len(data) % args.data_width != 0:
+                    print("invalid packet size!")
+
+                for i in range(0, len(data), args.data_width):
+                    sample = int.from_bytes(
+                        data[i:i+args.data_width], "little")
+                    recv_buf.append(sample)
+            except socket.timeout:
+                print("socket timeout")
+            except KeyboardInterrupt:
+                print(f"recv: {pkt_cnt}")
+                break
+    except Exception as e:
+        print(f"err: {e}")
+
+    expected_length = math.ceil(
+        adc_dac_ratio * args.pulse_period / args.window_size)
+    if len(recv_buf) < expected_length:
+        print("data underflow")
+        return []
+
+    recv_buf = recv_buf[:expected_length-1]
+    print(f"collected {len(recv_buf)} samples")
+    # print(recv_buf)
+    return recv_buf
+
+
+def run(args, sock):
+    dest = (args.ip, args.send_port)
+
+    if args.pulse_period % args.window_size != 0:
+        print("Invalid pulse period (should be divisable by WINDOW_SIZE)")
+        return
+
+    # reset
+    sock.sendto(0x0f00.to_bytes(2), dest)
+
+    # config data
+    sock.sendto(format_ctrl_data(args.pulse_width,
+                                 args.pulse_period,
+                                 args.pulse_height,
+                                 args.pulse_num, args,
+                                 dac_bits=args.dac_bits), dest)
+
+    sock.sendto(0xf000.to_bytes(2), dest)
+    print("Sent start!")
+    data = recv_data(args, sock)
+    print(min(data), max(data))
+    plt.plot(data)
+    plt.show()
+
+
+def main():
+    parser = argparse.ArgumentParser(
+        description="Консоль для рефлектометра"
+    )
+
+    parser.add_argument("--debug", action='store_true',
+                        help="отладочная отправка пакета soft_reset, пакета с данными и пакета start")
+
+    parser.add_argument("--ip", type=str, default="192.168.0.2",
+                        help="IP рефлектометра, по умолчанию 192.168.0.2")
+
+    parser.add_argument("--send-port", type=int, default=8080,
+                        help="Порт для отправки команд")
+
+    parser.add_argument("--recv-port", type=int,
+                        default=8080, help="Порт для приема данных")
+
+    parser.add_argument("--dac-bits", type=int, default=12,
+                        help="Битность ЦАП (влияет на максимальный pulse_height)")
+
+    parser.add_argument("--data-width", type=int,
+                        default=4, help="Байтность получаемых данных, по умолчанию 4 (AKA int32)")
+
+    parser.add_argument("--window-size", type=int,
+                        default=65, help="Размер окна для первого усреднения.")
+
+    parser.add_argument("--packet-size", type=int,
+                        default=1024, help="Размер отправляемых пакетов.")
+
+    # передача параметров через аргументы
+    for arg in ("pulse_width", "pulse_period", "pulse_num", "pulse_height"):
+        parser.add_argument(f"--{arg}", type=int,
+                            default=0, help=f"Задать {arg}")
+
+    args = parser.parse_args()
+
+    sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
+    sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
+    sock.bind(("0.0.0.0", args.recv_port))
+
+    if args.debug:
+        run_debug(args, sock)
+    else:
+        verify_args(args)
+        run(args, sock)
+
+    sock.close()
+
+
+if __name__ == "__main__":
+    main()

software/gui.py

@@ -0,0 +1,736 @@
+# shitpost
+
+import sys
+import math
+import socket
+import platform
+
+from PyQt6 import uic
+from dataclasses import dataclass
+from PyQt6.QtCore import QProcess, QTimer
+from PyQt6.QtCore import QObject, QThread, pyqtSignal
+
+from PyQt6.QtCore import Qt
+import pyqtgraph as pg
+from PyQt6.QtWidgets import QApplication, QMainWindow
+
+
+@dataclass
+class ReflectometerConfig:
+    ip: str
+    send_port: int
+    recv_port: int
+
+    dac_bits: int
+    data_width: int
+    window_size: int
+    packet_size: int
+
+    pulse_width: int
+    pulse_period: int
+    pulse_height: int
+    pulse_num: int
+
+    adc_dac_ratio: float = 0.52
+    socket_timeout_sec: float = 2.0
+
+
+class ReflectometerWorker(QObject):
+    data_ready = pyqtSignal(list)
+    status = pyqtSignal(str)
+    error = pyqtSignal(str)
+    finished = pyqtSignal()
+
+    def __init__(self, config: ReflectometerConfig):
+        super().__init__()
+        self.config = config
+        self._stop_requested = False
+        self._sock = None
+
+    def stop(self):
+        self._stop_requested = True
+
+        if self._sock is not None:
+            try:
+                self._sock.close()
+            except OSError:
+                pass
+
+    def run(self):
+        try:
+            self._validate_config()
+
+            self.status.emit("Открытие UDP-сокета...")
+
+            self._sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
+            self._sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
+            self._sock.settimeout(self.config.socket_timeout_sec)
+            self._sock.bind(("0.0.0.0", self.config.recv_port))
+
+            dest = (self.config.ip, self.config.send_port)
+
+            self.status.emit("Отправка soft reset...")
+            self._sock.sendto((0x0F00).to_bytes(2, "big"), dest)
+
+            self.status.emit("Отправка параметров...")
+            ctrl_data = self._format_ctrl_data()
+            self._sock.sendto(ctrl_data, dest)
+
+            self.status.emit("Отправка start...")
+            self._sock.sendto((0xF000).to_bytes(2, "big"), dest)
+
+            self.status.emit("Приём данных...")
+            data = self._recv_data()
+
+            if self._stop_requested:
+                self.status.emit("Операция остановлена")
+                return
+
+            self.data_ready.emit(data)
+            self.status.emit(f"Получено samples: {len(data)}")
+
+        except Exception as e:
+            if not self._stop_requested:
+                self.error.emit(str(e))
+
+        finally:
+            if self._sock is not None:
+                try:
+                    self._sock.close()
+                except OSError:
+                    pass
+
+            self.finished.emit()
+
+    def _format_ctrl_data(self) -> bytes:
+        output = bytearray()
+
+        output += 0b10001000.to_bytes(1, "little")
+
+        pulse_period_adc = (
+            int(self.config.pulse_period * self.config.adc_dac_ratio)
+            // self.config.window_size
+        ) * self.config.window_size
+
+        output += self.config.pulse_width.to_bytes(4, "little")
+        output += self.config.pulse_period.to_bytes(4, "little")
+        output += self.config.pulse_num.to_bytes(2, "little")
+        output += self.config.pulse_height.to_bytes(2, "little")
+        output += pulse_period_adc.to_bytes(4, "little")
+
+        if len(output) != 17:
+            raise ValueError("Config data should be 128 bits + 8 bit header")
+
+        return bytes(output)
+
+    def _recv_data(self) -> list[int]:
+        packet_count = math.ceil(
+            (
+                self.config.adc_dac_ratio
+                * self.config.pulse_period
+                / self.config.window_size
+                * self.config.data_width
+            )
+            / self.config.packet_size
+        )
+
+        expected_length = math.ceil(
+            self.config.adc_dac_ratio
+            * self.config.pulse_period
+            / self.config.window_size
+        )
+
+        recv_buf = []
+
+        for pkt_cnt in range(packet_count):
+            if self._stop_requested:
+                break
+
+            try:
+                packet, _ = self._sock.recvfrom(65536)
+            except socket.timeout:
+                raise TimeoutError(f"Таймаут приёма UDP-пакета #{pkt_cnt + 1}")
+
+            if len(packet) % self.config.data_width != 0:
+                raise ValueError(
+                    f"Некорректный размер UDP-пакета: {len(packet)} байт"
+                )
+
+            for i in range(0, len(packet), self.config.data_width):
+                sample = int.from_bytes(
+                    packet[i:i + self.config.data_width],
+                    "little",
+                )
+                recv_buf.append(sample)
+
+        if len(recv_buf) < expected_length:
+            raise ValueError(
+                f"Data underflow: получено {len(recv_buf)}, ожидалось {expected_length}"
+            )
+
+        return recv_buf[:expected_length - 1]
+
+    def _validate_config(self):
+        if self.config.pulse_period <= 0:
+            raise ValueError("pulse_period должен быть больше 0")
+
+        if self.config.pulse_num <= 0:
+            raise ValueError("pulse_num должен быть больше 0")
+
+        if self.config.window_size <= 0:
+            raise ValueError("window_size должен быть больше 0")
+
+        if self.config.packet_size <= 0:
+            raise ValueError("packet_size должен быть больше 0")
+
+        if self.config.data_width <= 0:
+            raise ValueError("data_width должен быть больше 0")
+
+        if self.config.pulse_period % self.config.window_size != 0:
+            raise ValueError("pulse_period должен быть кратен window_size")
+
+        if self.config.pulse_width >= 2**32 - 1:
+            raise ValueError("pulse_width слишком большой")
+
+        if self.config.pulse_period >= 2**32 - 1:
+            raise ValueError("pulse_period слишком большой")
+
+        if self.config.pulse_num >= 2**16 - 1:
+            raise ValueError("pulse_num слишком большой")
+
+        if self.config.pulse_height > 2**self.config.dac_bits - 1:
+            raise ValueError("pulse_height слишком большой")
+
+
+class MainWindow(QMainWindow):
+    def __init__(self):
+        super().__init__()
+
+        uic.loadUi("reflectometer.ui", self)
+
+        self.ping_process = None
+
+        self.ping_timeout_timer = QTimer(self)
+        self.ping_timeout_timer.setSingleShot(True)
+        self.ping_timeout_timer.timeout.connect(self.on_ping_timeout)
+
+        self.button_ping.clicked.connect(self.check_ping)
+
+        # settings
+        self.pulse_period = 0
+        self.pulse_height = 0
+        self.pulse_width = 0
+        self.pulse_num = 0
+
+        self.dac_dw = 14
+        self.adc_dw = 12
+        self.nmax = 4096
+        self.packet_size = 1024
+        self.window_size = 65
+        self.adc_dac_ration = 0.52
+        self.accum_width = 32
+
+        # setup
+
+        self.setup_pulse_controls()
+        self.setup_global_settings()
+
+        self.update_pulse_limits()
+
+        self.data = []
+
+        self.adc_dac_ratio = 0.52
+
+        self.measurement_thread = None
+        self.measurement_worker = None
+
+        self.setup_graph()
+        self.setup_network_settings()
+
+        self.button_start.clicked.connect(self.run_measurement)
+        self.button_graph_autoscale.clicked.connect(self.reset_graph_autoscale)
+
+    # ping utils
+
+    def check_ping(self):
+        ip = self.line_ip.text().strip()
+
+        if not ip:
+            self.label_ping_status.setText("set ip!!")
+            return
+
+        if "_" in self.line_ip.displayText():
+            self.label_ping_status.setText("IP invalid")
+            return
+
+        if self.ping_process is not None:
+            if self.ping_process.state() != QProcess.ProcessState.NotRunning:
+                self.label_ping_status.setText("Ping inflight")
+                return
+
+        self.label_ping_status.setText("ping...")
+        self.button_ping.setEnabled(False)
+
+        self.ping_process = QProcess(self)
+
+        self.ping_process.finished.connect(self.on_ping_finished)
+        self.ping_process.errorOccurred.connect(self.on_ping_error)
+
+        system_name = platform.system().lower()
+
+        if system_name == "windows":
+            program = "ping"
+            arguments = ["-n", "1", "-w", "2000", ip]
+        else:
+            program = "ping"
+            arguments = ["-c", "1", "-W", "2", ip]
+
+        self.ping_process.start(program, arguments)
+        # fallback
+        self.ping_timeout_timer.start(2000)
+
+    def on_ping_finished(self, exit_code, exit_status):
+        self.ping_timeout_timer.stop()
+        self.button_ping.setEnabled(True)
+
+        if exit_code == 0:
+            self.label_ping_status.setText("алё✅")
+        else:
+            self.label_ping_status.setText("не алё❌")
+
+    def on_ping_error(self):
+        self.ping_timeout_timer.stop()
+        self.button_ping.setEnabled(True)
+        self.label_ping_status.setText("ping unavail")
+
+    def on_ping_timeout(self):
+        if self.ping_process is not None:
+            if self.ping_process.state() != QProcess.ProcessState.NotRunning:
+                self.ping_process.kill()
+
+        self.button_ping.setEnabled(True)
+
+    # pulse controls
+    def setup_pulse_controls(self):
+        self._bind_slider_and_spinbox(
+            name="pulse_period",
+            slider=self.slider_pulse_period,
+            box=self.box_pulse_period,
+            normalize_value=self.normalize_pulse_period,
+        )
+
+        self._bind_slider_and_spinbox(
+            name="pulse_height",
+            slider=self.slider_pulse_height,
+            box=self.box_pulse_height,
+        )
+
+        self._bind_slider_and_spinbox(
+            name="pulse_width",
+            slider=self.slider_pulse_width,
+            box=self.box_pulse_width,
+        )
+
+        self._bind_slider_and_spinbox(
+            name="pulse_num",
+            slider=self.slider_pulse_num,
+            box=self.box_pulse_num,
+        )
+
+    def _bind_slider_and_spinbox(self, name, slider, box, normalize_value=None):
+        """
+        Связывает QSlider и QSpinBox по значению.
+        Значение автоматически записывается в self.<name>.
+        """
+
+        minimum = min(slider.minimum(), box.minimum())
+        maximum = max(slider.maximum(), box.maximum())
+
+        slider.setRange(minimum, maximum)
+        box.setRange(minimum, maximum)
+
+        def normalize(value):
+            if normalize_value is None:
+                return value
+
+            return normalize_value(value)
+
+        value = normalize(box.value())
+
+        slider.setValue(value)
+        box.setValue(value)
+        setattr(self, name, value)
+
+        def update_value(new_value):
+            new_value = normalize(new_value)
+
+            if slider.value() != new_value:
+                slider.setValue(new_value)
+
+            if box.value() != new_value:
+                box.setValue(new_value)
+
+            setattr(self, name, new_value)
+
+        slider.valueChanged.connect(update_value)
+        box.valueChanged.connect(update_value)
+
+    def normalize_pulse_period(self, value):
+        step = max(1, getattr(self, "window_size",
+                   self.box_window_size.value()))
+
+        snapped_value = round(value / step) * step
+
+        minimum = self.box_pulse_period.minimum()
+        maximum = self.box_pulse_period.maximum()
+
+        return max(minimum, min(snapped_value, maximum))
+
+    def _set_max_for_pair(self, slider, box, maximum):
+        slider.setMaximum(maximum)
+        box.setMaximum(maximum)
+
+        value = min(box.value(), maximum)
+        box.setValue(value)
+        slider.setValue(value)
+
+    def set_max_pulse_period(self, maximum):
+        self._set_max_for_pair(
+            slider=self.slider_pulse_period,
+            box=self.box_pulse_period,
+            maximum=maximum,
+        )
+        self.pulse_period = self.box_pulse_period.value()
+
+    def set_max_pulse_height(self, maximum):
+        self._set_max_for_pair(
+            slider=self.slider_pulse_height,
+            box=self.box_pulse_height,
+            maximum=maximum,
+        )
+        self.pulse_height = self.box_pulse_height.value()
+
+    def set_max_pulse_width(self, maximum):
+        self._set_max_for_pair(
+            slider=self.slider_pulse_width,
+            box=self.box_pulse_width,
+            maximum=maximum,
+        )
+        self.pulse_width = self.box_pulse_width.value()
+
+    def set_max_pulse_num(self, maximum):
+        self._set_max_for_pair(
+            slider=self.slider_pulse_num,
+            box=self.box_pulse_num,
+            maximum=maximum,
+        )
+        self.pulse_num = self.box_pulse_num.value()
+
+    # settings
+
+    def setup_global_settings(self):
+        self._bind_spinbox_setting(
+            name="dac_dw",
+            box=self.box_dac_dw,
+        )
+
+        self._bind_spinbox_setting(
+            name="adc_dw",
+            box=self.box_adc_dw,
+        )
+
+        self._bind_spinbox_setting(
+            name="nmax",
+            box=self.box_nmax,
+        )
+
+        self._bind_spinbox_setting(
+            name="window_size",
+            box=self.box_window_size,
+            after_change=self.on_window_size_changed,
+        )
+
+        self._bind_spinbox_setting(
+            name="packet_size",
+            box=self.box_packet_size,
+        )
+
+        self._bind_spinbox_setting(
+            name="adc_dac_ratio",
+            box=self.box_adc_dac_ratio,
+        )
+
+        self._bind_spinbox_setting(
+            name="accum_width",
+            box=self.box_accum_width,
+        )
+
+        self._bind_spinbox_setting(
+            name="recv_port",
+            box=self.box_recv_port,
+        )
+
+        self._bind_spinbox_setting(
+            name="send_port",
+            box=self.box_send_port,
+        )
+
+        # применяем шаг для pulse_period сразу при старте
+        self.update_pulse_period_step()
+
+    def _bind_spinbox_setting(self, name, box, after_change=None):
+        """
+        Связывает QSpinBox с полем self.<name>.
+        Например:
+        box_dac_dw -> self.dac_dw
+        box_window_size -> self.window_size
+        """
+
+        value = box.value()
+        setattr(self, name, value)
+
+        def on_value_changed(new_value):
+            setattr(self, name, new_value)
+
+            self.update_pulse_limits()
+
+            if after_change is not None:
+                after_change(new_value)
+
+        box.valueChanged.connect(on_value_changed)
+
+    def update_pulse_limits(self):
+        # re-calc limits
+
+        # nmax -> pulse_period limit
+        self.set_max_pulse_period(self.nmax * self.window_size)
+        self.set_max_pulse_width(self.nmax * self.window_size)
+        # accum_width + adc_width -> max pulse num
+
+        self.set_max_pulse_num(
+            2 ** (self.accum_width - self.adc_dw - math.ceil(math.log2(self.window_size))) - 1)
+        # dac_width -> max pulse height
+        self.set_max_pulse_height(2 ** self.dac_dw - 1)
+
+        self.slider_pulse_period.setMinimum(self.window_size)
+        self.box_pulse_period.setMinimum(self.window_size)
+
+    def on_window_size_changed(self, new_value):
+        self.update_pulse_period_step()
+
+    def update_pulse_period_step(self):
+        # set window_size step
+
+        step = max(1, self.window_size)
+
+        self.box_pulse_period.setSingleStep(step)
+        self.slider_pulse_period.setSingleStep(step)
+        self.slider_pulse_period.setPageStep(step)
+
+        self.snap_pulse_period_to_step(step)
+
+    def snap_pulse_period_to_step(self, step):
+        """
+        Подгоняет текущее значение pulse_period к ближайшему кратному window_size.
+
+        Это нужно потому, что QSlider при перетаскивании мышкой
+        всё равно может дать любое промежуточное значение.
+        """
+
+        current_value = self.box_pulse_period.value()
+
+        snapped_value = round(current_value / step) * step
+
+        minimum = self.box_pulse_period.minimum()
+        maximum = self.box_pulse_period.maximum()
+
+        snapped_value = max(minimum, min(snapped_value, maximum))
+
+        self.box_pulse_period.setValue(snapped_value)
+        self.slider_pulse_period.setValue(snapped_value)
+        self.pulse_period = snapped_value
+
+    # graph
+    def setup_graph(self):
+        self.graph_widget = pg.PlotWidget()
+        self.graph_widget.setLabel("left", "ADC value")
+        self.graph_widget.setLabel("bottom", "Sample")
+        self.graph_widget.showGrid(x=True, y=True)
+
+        self.graph_curve = self.graph_widget.plot(
+            [],
+            name="Data",
+        )
+
+        self.reference_curve = self.graph_widget.plot(
+            [],
+            name="Reference",
+        )
+
+        self.graph_layout.addWidget(self.graph_widget)
+        self.graph_curve = self.graph_widget.plot(
+            [], pen=pg.mkPen(width=2, color="b"))
+        self.reference_curve = self.graph_widget.plot(
+            [], pen=pg.mkPen(style=Qt.PenStyle.DashLine, color="g"))
+
+        self.checkbox_draw_reference.stateChanged.connect(
+            self.update_reference_graph)
+
+    def setup_network_settings(self):
+        self._bind_spinbox_setting(
+            name="recv_port",
+            box=self.box_recv_port,
+        )
+
+        self._bind_spinbox_setting(
+            name="send_port",
+            box=self.box_send_port,
+        )
+
+    def run_measurement(self):
+        if self.measurement_thread is not None:
+            if self.measurement_thread.isRunning():
+                self.set_measurement_status("Измерение выполняется")
+                return
+
+        config = self.build_reflectometer_config()
+
+        self.data = []
+        self.graph_curve.setData([])
+
+        self.measurement_thread = QThread(self)
+        self.measurement_worker = ReflectometerWorker(config)
+
+        self.measurement_worker.moveToThread(self.measurement_thread)
+
+        self.measurement_thread.started.connect(self.measurement_worker.run)
+
+        self.measurement_worker.status.connect(self.set_measurement_status)
+        self.measurement_worker.error.connect(self.on_measurement_error)
+        self.measurement_worker.data_ready.connect(self.on_data_received)
+
+        self.measurement_worker.finished.connect(self.measurement_thread.quit)
+        self.measurement_worker.finished.connect(
+            self.measurement_worker.deleteLater)
+
+        self.measurement_thread.finished.connect(
+            self.measurement_thread.deleteLater)
+        self.measurement_thread.finished.connect(self.on_measurement_finished)
+
+        self.measurement_thread.start()
+
+    def build_reflectometer_config(self) -> ReflectometerConfig:
+        ip = self.line_ip.text().strip()
+
+        if not ip:
+            raise ValueError("IP адрес не задан")
+
+        data_width = self.accum_width // 8
+
+        return ReflectometerConfig(
+            ip=ip,
+            send_port=self.send_port,
+            recv_port=self.recv_port,
+
+            dac_bits=self.dac_dw,
+            data_width=data_width,
+            window_size=self.window_size,
+            packet_size=self.packet_size,
+
+            pulse_width=self.pulse_width,
+            pulse_period=self.pulse_period,
+            pulse_height=self.pulse_height,
+            pulse_num=self.pulse_num,
+
+            adc_dac_ratio=self.adc_dac_ratio,
+        )
+
+    def on_data_received(self, data: list[int]):
+        self.data = data
+        # normalize
+        for i in range(len(data)):
+            self.data[i] /= (self.window_size * self.pulse_num)
+            self.data[i] -= 2 ** (self.adc_dw - 1) + 1
+
+        self.draw_main_graph()
+        self.update_reference_graph()
+
+        if data:
+            self.set_measurement_status(
+                f"Готово. smp: {len(data)}, min: {min(data)}, max: {max(data)}"
+            )
+        else:
+            self.set_measurement_status("Данные пустые")
+
+    def on_measurement_error(self, message: str):
+        self.set_measurement_status(f"Ошибка: {message}")
+
+    def on_measurement_finished(self):
+        self.measurement_worker = None
+        self.measurement_thread = None
+
+    def stop_measurement(self):
+        if self.measurement_worker is not None:
+            self.measurement_worker.stop()
+
+    def set_measurement_status(self, text: str):
+        self.label_status.setText(text)
+
+    def draw_main_graph(self):
+        if not self.data:
+            self.graph_curve.setData([])
+            return
+
+        x = list(range(len(self.data)))
+        self.graph_curve.setData(x, self.data)
+
+    def update_reference_graph(self):
+        """
+        Рисует или очищает эталонный график.
+        Вызывается после получения данных и при переключении checkbox_draw_reference.
+        """
+
+        if not self.checkbox_draw_reference.isChecked():
+            self.reference_curve.setData([])
+            return
+
+        if not self.data:
+            self.reference_curve.setData([])
+            return
+
+        reference_data = self.build_reference_data(len(self.data))
+
+        if not reference_data:
+            self.reference_curve.setData([])
+            return
+
+        x = list(range(len(reference_data)))
+        self.reference_curve.setData(x, reference_data)
+
+    def build_reference_data(self, length: int) -> list[int]:
+        reference = [0] * length
+
+        actual_pulse_width = round(
+            (self.pulse_width * self.adc_dac_ratio) / self.window_size)
+
+        reference[0:actual_pulse_width] = [
+            (self.pulse_height / 2 ** (self.dac_dw - self.adc_dw)) - 2 ** (self.adc_dw - 1), ] * (actual_pulse_width - 1)
+
+        return reference
+
+    def reset_graph_autoscale(self):
+        self.graph_widget.enableAutoRange(axis="xy", enable=True)
+        self.graph_widget.autoRange()
+
+
+def main():
+    app = QApplication(sys.argv)
+
+    window = MainWindow()
+    window.show()
+
+    sys.exit(app.exec())
+
+
+if __name__ == "__main__":
+    main()

software/reflectometer.ui

@@ -0,0 +1,505 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<ui version="4.0">
+ <class>MainWindow</class>
+ <widget class="QMainWindow" name="MainWindow">
+  <property name="geometry">
+   <rect>
+    <x>0</x>
+    <y>0</y>
+    <width>1023</width>
+    <height>708</height>
+   </rect>
+  </property>
+  <property name="windowTitle">
+   <string>Reflectometer PREMIUM</string>
+  </property>
+  <widget class="QWidget" name="centralwidget">
+   <layout class="QHBoxLayout" name="horizontalLayout" stretch="4,2">
+    <item>
+     <layout class="QVBoxLayout" name="graph_layout"/>
+    </item>
+    <item>
+     <layout class="QVBoxLayout" name="settings_layout">
+      <item>
+       <widget class="QTabWidget" name="tabWidget">
+        <property name="currentIndex">
+         <number>1</number>
+        </property>
+        <widget class="QWidget" name="tab">
+         <attribute name="title">
+          <string>Настройки</string>
+         </attribute>
+         <layout class="QVBoxLayout" name="verticalLayout_2">
+          <item>
+           <widget class="QScrollArea" name="scrollArea">
+            <property name="widgetResizable">
+             <bool>true</bool>
+            </property>
+            <widget class="QWidget" name="scrollAreaWidgetContents">
+             <property name="geometry">
+              <rect>
+               <x>0</x>
+               <y>0</y>
+               <width>294</width>
+               <height>621</height>
+              </rect>
+             </property>
+             <layout class="QVBoxLayout" name="verticalLayout">
+              <item>
+               <widget class="QLabel" name="label_2">
+                <property name="font">
+                 <font>
+                  <pointsize>12</pointsize>
+                 </font>
+                </property>
+                <property name="text">
+                 <string>Аппаратные параметры</string>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QSpinBox" name="box_dac_dw">
+                <property name="suffix">
+                 <string> bits</string>
+                </property>
+                <property name="prefix">
+                 <string>DAC data width: </string>
+                </property>
+                <property name="minimum">
+                 <number>8</number>
+                </property>
+                <property name="maximum">
+                 <number>32</number>
+                </property>
+                <property name="value">
+                 <number>14</number>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QSpinBox" name="box_adc_dw">
+                <property name="suffix">
+                 <string> bits</string>
+                </property>
+                <property name="prefix">
+                 <string>ADC data width: </string>
+                </property>
+                <property name="minimum">
+                 <number>8</number>
+                </property>
+                <property name="maximum">
+                 <number>32</number>
+                </property>
+                <property name="value">
+                 <number>12</number>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QSpinBox" name="box_accum_width">
+                <property name="suffix">
+                 <string> bits</string>
+                </property>
+                <property name="prefix">
+                 <string>Accum width: </string>
+                </property>
+                <property name="minimum">
+                 <number>16</number>
+                </property>
+                <property name="maximum">
+                 <number>64</number>
+                </property>
+                <property name="singleStep">
+                 <number>8</number>
+                </property>
+                <property name="value">
+                 <number>32</number>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QDoubleSpinBox" name="box_adc_dac_ratio">
+                <property name="prefix">
+                 <string>ADC:DAC clk ratio: </string>
+                </property>
+                <property name="minimum">
+                 <double>0.200000000000000</double>
+                </property>
+                <property name="maximum">
+                 <double>3.000000000000000</double>
+                </property>
+                <property name="singleStep">
+                 <double>0.010000000000000</double>
+                </property>
+                <property name="value">
+                 <double>0.520000000000000</double>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QSpinBox" name="box_nmax">
+                <property name="prefix">
+                 <string>N Max: </string>
+                </property>
+                <property name="minimum">
+                 <number>512</number>
+                </property>
+                <property name="maximum">
+                 <number>65536</number>
+                </property>
+                <property name="value">
+                 <number>4096</number>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QSpinBox" name="box_window_size">
+                <property name="prefix">
+                 <string>Window size: </string>
+                </property>
+                <property name="minimum">
+                 <number>1</number>
+                </property>
+                <property name="maximum">
+                 <number>1024</number>
+                </property>
+                <property name="value">
+                 <number>65</number>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QSpinBox" name="box_packet_size">
+                <property name="suffix">
+                 <string> bytes</string>
+                </property>
+                <property name="prefix">
+                 <string>Packet size: </string>
+                </property>
+                <property name="minimum">
+                 <number>1</number>
+                </property>
+                <property name="maximum">
+                 <number>1572</number>
+                </property>
+                <property name="value">
+                 <number>1024</number>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="Line" name="line_2">
+                <property name="orientation">
+                 <enum>Qt::Orientation::Horizontal</enum>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QLabel" name="label">
+                <property name="font">
+                 <font>
+                  <pointsize>12</pointsize>
+                 </font>
+                </property>
+                <property name="text">
+                 <string>Подключение</string>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QLabel" name="label_3">
+                <property name="text">
+                 <string>IP устройства:</string>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QLineEdit" name="line_ip">
+                <property name="inputMask">
+                 <string>999.999.999.999</string>
+                </property>
+                <property name="text">
+                 <string>192.168.0.2</string>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QLabel" name="label_4">
+                <property name="text">
+                 <string>Порт отправки:</string>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QSpinBox" name="box_send_port">
+                <property name="minimum">
+                 <number>80</number>
+                </property>
+                <property name="maximum">
+                 <number>65536</number>
+                </property>
+                <property name="value">
+                 <number>8080</number>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QLabel" name="label_5">
+                <property name="text">
+                 <string>Порт приёма:</string>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QSpinBox" name="box_recv_port">
+                <property name="minimum">
+                 <number>80</number>
+                </property>
+                <property name="maximum">
+                 <number>65536</number>
+                </property>
+                <property name="value">
+                 <number>8080</number>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QLabel" name="label_6">
+                <property name="font">
+                 <font>
+                  <pointsize>12</pointsize>
+                 </font>
+                </property>
+                <property name="text">
+                 <string>Тест</string>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QPushButton" name="button_ping">
+                <property name="text">
+                 <string>алё</string>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QLabel" name="label_ping_status">
+                <property name="text">
+                 <string>...</string>
+                </property>
+                <property name="alignment">
+                 <set>Qt::AlignmentFlag::AlignCenter</set>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <spacer name="verticalSpacer">
+                <property name="orientation">
+                 <enum>Qt::Orientation::Vertical</enum>
+                </property>
+                <property name="sizeHint" stdset="0">
+                 <size>
+                  <width>20</width>
+                  <height>40</height>
+                 </size>
+                </property>
+               </spacer>
+              </item>
+             </layout>
+            </widget>
+           </widget>
+          </item>
+         </layout>
+        </widget>
+        <widget class="QWidget" name="tab_2">
+         <attribute name="title">
+          <string>Управление</string>
+         </attribute>
+         <layout class="QVBoxLayout" name="verticalLayout_3">
+          <item>
+           <widget class="QLabel" name="label_7">
+            <property name="font">
+             <font>
+              <pointsize>12</pointsize>
+             </font>
+            </property>
+            <property name="text">
+             <string>Импульс</string>
+            </property>
+           </widget>
+          </item>
+          <item>
+           <layout class="QHBoxLayout" name="horizontalLayout_2" stretch="1,1,2">
+            <item>
+             <widget class="QLabel" name="label_8">
+              <property name="text">
+               <string>Период</string>
+              </property>
+             </widget>
+            </item>
+            <item>
+             <widget class="QSpinBox" name="box_pulse_period">
+              <property name="minimum">
+               <number>1</number>
+              </property>
+             </widget>
+            </item>
+            <item>
+             <widget class="QSlider" name="slider_pulse_period">
+              <property name="orientation">
+               <enum>Qt::Orientation::Horizontal</enum>
+              </property>
+             </widget>
+            </item>
+           </layout>
+          </item>
+          <item>
+           <layout class="QHBoxLayout" name="horizontalLayout_3" stretch="1,1,2">
+            <item>
+             <widget class="QLabel" name="label_9">
+              <property name="text">
+               <string>Ширина</string>
+              </property>
+             </widget>
+            </item>
+            <item>
+             <widget class="QSpinBox" name="box_pulse_width"/>
+            </item>
+            <item>
+             <widget class="QSlider" name="slider_pulse_width">
+              <property name="orientation">
+               <enum>Qt::Orientation::Horizontal</enum>
+              </property>
+             </widget>
+            </item>
+           </layout>
+          </item>
+          <item>
+           <layout class="QHBoxLayout" name="horizontalLayout_4" stretch="1,1,2">
+            <item>
+             <widget class="QLabel" name="label_10">
+              <property name="text">
+               <string>Высота</string>
+              </property>
+             </widget>
+            </item>
+            <item>
+             <widget class="QSpinBox" name="box_pulse_height"/>
+            </item>
+            <item>
+             <widget class="QSlider" name="slider_pulse_height">
+              <property name="orientation">
+               <enum>Qt::Orientation::Horizontal</enum>
+              </property>
+             </widget>
+            </item>
+           </layout>
+          </item>
+          <item>
+           <layout class="QHBoxLayout" name="horizontalLayout_5" stretch="1,1,2">
+            <item>
+             <widget class="QLabel" name="label_11">
+              <property name="text">
+               <string>Количество</string>
+              </property>
+             </widget>
+            </item>
+            <item>
+             <widget class="QSpinBox" name="box_pulse_num">
+              <property name="minimum">
+               <number>1</number>
+              </property>
+             </widget>
+            </item>
+            <item>
+             <widget class="QSlider" name="slider_pulse_num">
+              <property name="minimum">
+               <number>1</number>
+              </property>
+              <property name="orientation">
+               <enum>Qt::Orientation::Horizontal</enum>
+              </property>
+             </widget>
+            </item>
+           </layout>
+          </item>
+          <item>
+           <widget class="QPushButton" name="button_start">
+            <property name="text">
+             <string>start!</string>
+            </property>
+           </widget>
+          </item>
+          <item>
+           <layout class="QHBoxLayout" name="horizontalLayout_6" stretch="1,3">
+            <item>
+             <widget class="QLabel" name="label_13">
+              <property name="font">
+               <font>
+                <bold>true</bold>
+               </font>
+              </property>
+              <property name="text">
+               <string>Статус:</string>
+              </property>
+             </widget>
+            </item>
+            <item>
+             <widget class="QLabel" name="label_status">
+              <property name="text">
+               <string>-</string>
+              </property>
+             </widget>
+            </item>
+           </layout>
+          </item>
+          <item>
+           <widget class="QCheckBox" name="checkbox_draw_reference">
+            <property name="text">
+             <string>Отрисовка эталона</string>
+            </property>
+           </widget>
+          </item>
+          <item>
+           <spacer name="verticalSpacer_2">
+            <property name="orientation">
+             <enum>Qt::Orientation::Vertical</enum>
+            </property>
+            <property name="sizeHint" stdset="0">
+             <size>
+              <width>20</width>
+              <height>40</height>
+             </size>
+            </property>
+           </spacer>
+          </item>
+          <item>
+           <widget class="QPushButton" name="button_graph_autoscale">
+            <property name="text">
+             <string>Сброс масштаба</string>
+            </property>
+           </widget>
+          </item>
+         </layout>
+        </widget>
+       </widget>
+      </item>
+     </layout>
+    </item>
+   </layout>
+  </widget>
+  <widget class="QMenuBar" name="menubar">
+   <property name="geometry">
+    <rect>
+     <x>0</x>
+     <y>0</y>
+     <width>1023</width>
+     <height>30</height>
+    </rect>
+   </property>
+  </widget>
+  <widget class="QStatusBar" name="statusbar"/>
+ </widget>
+ <resources/>
+ <connections/>
+</ui>