upd: new TB, sampler refactor

upd: reflectometer TB readaout data task

.gitignore

@@ -26,4 +26,8 @@ run_sim.tcl
 *.bit
 *.xsa
 *.ltx
-*.bin
+*.bin
+
+# slang files
+.slang
+files.f

README.md

@@ -1,3 +1,10 @@
 # reflectometer_fpga_project
 
-Проект по разработке аппаратной вычислительной части для отпического рефлектометра для обнаружения утечек.
+Проект по разработке аппаратной вычислительной части для оптического рефлектометра для обнаружения утечек.
+
+## Структура
+- constaints: констрейны под ПЛИСы
+- designs: разные сборные дизайны, включая полный проект
+- rtl: код блоков, в каждой папке есть src и tests
+- scripts: скрипты для сборки 
+- software: программные скрипты

designs/README.md

@@ -1,5 +1,5 @@
 # Директория с тестовыми проектами под ПЛИСу
 
-- eth_ctrl_debug: проект с ethernet и контроллером. Позволяет через ILA проверить, что пакет правильно принимается и что значения правильно выставляются.
+- adc_dac_synchronizer: проект для тестирования и отладки связки сэмплер + контроллер + генератор, проверки синхронизации между импульсами.
-
+- reflectometer_base: базовый проект рефлектометра без внешних интерфейсов, только I/O через AXI Stream.
-- eth_generator: проект на базе eth_ctrl_debug, в который включен генератор импульсов. В паре с ЦАП можно через консольку по Ethernet запускать генерацию разных импульсов.
+- reflectometer_prototype: тестовый проект под AX7102 с управлением и отправкой данных по ethernet.

designs/adc_dac_synchoronizer/Makefile

@@ -7,7 +7,7 @@
 #
 
 # FPGA settings
-FPGA_PART = xc7a35tfgg484-1
+FPGA_PART = xc7a100tfgg484-2
 FPGA_TOP = sync_top
 FPGA_ARCH = artix7
 
@@ -16,13 +16,20 @@ RTL_DIR = ../../rtl
 
 include ../../scripts/vivado.mk
 
+
+SYN_FILES += $(sort $(shell find ../../rtl/sampler/src -type f -name '*.sv'))
+SYN_FILES += $(sort $(shell find ../../rtl/generator/src -type f -name '*.sv'))
 SYN_FILES += sync_top.sv
-SYN_FILES += $(sort $(shell find ../../rtl -type f \( -name '*.v' -o -name '*.sv' \)))
 
+XCI_FILES += $(sort $(shell find ip/ -type f -name '*.xci'))
 
-XDC_FILES += ../../constraints/ax7a035b.xdc
+XDC_FILES += ../../constraints/ax7102.xdc
 XDC_FILES += debug.xdc
 
+SYN_FILES += tb_sync_top.sv
+
+SIM_TOP = tb_top
+
 
 
 program: $(PROJECT).bit

designs/adc_dac_synchoronizer/debug.xdc

@@ -1,10 +1,12 @@
 # Primary clocks
-create_clock -name eth_clk -period 8.000  [get_ports dac_clk_in]
+create_clock -name geneartor_clk -period 8.000  [get_ports clk_dac]
-create_clock -name acc_clk -period 15.385  [get_ports adc_clk_in]
+create_clock -name sampler_clk -period 15.385  [get_ports clk_adc]
+set_clock_groups -asynchronous -group [get_clocks geneartor_clk] -group [get_clocks sampler_clk]
 
+# set_false_path -through [get_nets -hierarchical {*dac_signal* *internal_wire_singnal* *adc_singnal*}]
+# set_false_path -through [get_nets {dac_done dac_done_stretched dac_request adc_done adc_request}]
 
-# Asynchronous clock groups
+ set_property DONT_TOUCH true [get_cells -hierarchical -filter {NAME =~ *generator_inst*pulse_height_reg*}]
-
+ set_property DONT_TOUCH true [get_cells -hierarchical -filter {NAME =~ *generator_inst*dac_out_reg*}]
-set_clock_groups -name ASYNC_ETH_ACC -asynchronous \
+# Применяем к самому проводу сигнала CE, чтобы Vivado не дробила его
-    -group [get_clocks eth_clk] \
+# set_property DONT_TOUCH true [get_nets -of_objects [get_pins -hierarchical -filter {PIN_NAME =~ *CE} -of_objects [get_cells *pulse_height_reg*]]]
-    -group [get_clocks acc_clk]

designs/adc_dac_synchoronizer/sync_top.sv

@@ -2,113 +2,137 @@
 
 module sync_top
 #(
-    parameter int unsigned DAC_DATA_WIDTH = 14,
+    parameter int unsigned DAC_DATA_WIDTH = 14, // DAC bit-width
-    parameter int unsigned ADC_DATA_WIDTH = 12,
+    parameter int unsigned ADC_DATA_WIDTH = 12, // ADC bit-width
-    parameter int unsigned PACK_FACTOR    = 1,
+    parameter int unsigned PACK_FACTOR    = 1,  // number of ADC readings per transaction
-    parameter int unsigned PROCESS_MODE   = 0
+    parameter int unsigned PROCESS_MODE   = 0,  // representation format of ADC readings (0 - direct code, 1 - 2's completment)
+    parameter int unsigned ZERO_LEVEL     = 0,
+    parameter int unsigned USE_DELAY_LINE = 0 
 )
 (
-    input  adc_clk_in,
+    input  clk_adc,
-    input  adc_rst,
+    input  rst_adc,
-
+    input  clk_dac,
-    input  dac_clk_in,
+    input  rst_dac,
-    input  dac_rst,
+    input  start,
-
+    input  out_of_range,
-    input  dac_start,
-
     input  [31:0]                 pulse_width,
-    input  [31:0]                 pulse_period,
+    input  [31:0]                 pulse_period, // DAC counter limit
     input  [DAC_DATA_WIDTH-1:0]   pulse_height,
     input  [15:0]                 pulse_num,
-    input  [31:0]                 smp_num,
+    input  [31:0]                 smp_num,      // ADC counter limit
-
+    output [ADC_DATA_WIDTH*PACK_FACTOR-1:0] m_axis_tdata,
-    output logic [ADC_DATA_WIDTH*PACK_FACTOR-1:0] m_axis_tdata,
+    output                                  m_axis_tvalid
-    output logic                                  m_axis_tvalid
 );
 
     //------------------------------------------------------------
     // Internal signals
     //------------------------------------------------------------
+    wire dac_done, dac_request, adc_done, adc_request;
+    wire [DAC_DATA_WIDTH-1:0] dac_signal;
+    wire [ADC_DATA_WIDTH-1:0] internal_wire_signal; 
+    wire [ADC_DATA_WIDTH-1:0] adc_signal;
 
-   (* MARK_DEBUG="true" *) logic sample_req;
+    // 1. Адаптация разрядности и «заземление» лишних бит
-   (* MARK_DEBUG="true" *) logic sample_req_sync1;
+    generate
-   (* MARK_DEBUG="true" *) logic sample_req_sync2;
+        if (ADC_DATA_WIDTH > DAC_DATA_WIDTH) begin : g_pad_zeros
-   (* MARK_DEBUG="true" *) logic sample_req_sync3;
+            // АЦП шире ЦАП: добиваем нулями старшие биты
+            assign internal_wire_signal = { {(ADC_DATA_WIDTH - DAC_DATA_WIDTH){1'b0}}, dac_signal };
+        end
+        else if (ADC_DATA_WIDTH < DAC_DATA_WIDTH) begin : g_truncate
+            // ЦАП шире АЦП (например, 14 -> 12): забираем младшие биты
+            assign internal_wire_signal = dac_signal[DAC_DATA_WIDTH-1:DAC_DATA_WIDTH-ADC_DATA_WIDTH];
+//            (* mark_debug = "true" *) wire dummy;
+//            assign dummy = ^dac_signal;
+        end
+        else begin : g_match
+            // Разрядности равны
+            assign internal_wire_signal = dac_signal;
+        end
+    endgenerate
 
-   (* MARK_DEBUG="true" *) logic sample_done;
+    generate
-   (* MARK_DEBUG="true" *) logic sample_done_sync1;
+        if (USE_DELAY_LINE > 0) begin : g_delay_line
-   (* MARK_DEBUG="true" *) logic sample_done_sync2;
+            localparam int DELAY_LENGTH = USE_DELAY_LINE;
-   (* MARK_DEBUG="true" *) logic sample_done_sync3;
+            // Двумерный массив для линии задержки
-
+            logic [DELAY_LENGTH-1:0][ADC_DATA_WIDTH-1:0] signal_delay_line;
-   (* MARK_DEBUG="true" *) logic pulse;
+            
-   (* MARK_DEBUG="true" *) logic [DAC_DATA_WIDTH-1:0] pulse_height_out;
+            always_ff @(posedge clk_dac) begin
-
+                signal_delay_line[0] <= internal_wire_signal;
-    //------------------------------------------------------------
+                for (int i = 0; i < DELAY_LENGTH-1; i++) begin
-    // Simple DAC -> ADC test source
+                    signal_delay_line[i+1] <= signal_delay_line[i];
-    //
+                end
-    // generator output is directly connected to sampler input
+            end
-    // with width truncation:
+            
-    //
+            // ИСПРАВЛЕНО: читаем из последнего элемента массива
-    // pulse_height_out[13:0] -> data_in[11:0]
+            assign adc_signal = signal_delay_line[DELAY_LENGTH-1];
-    //------------------------------------------------------------
+        end 
-  (* MARK_DEBUG="true" *)  logic [ADC_DATA_WIDTH-1:0] data_in;
+        else begin : g_no_delay
-  (* MARK_DEBUG="true" *)  logic out_of_range;
+            assign adc_signal = internal_wire_signal;
-
+        end
-    assign data_in      = pulse_height_out[ADC_DATA_WIDTH-1:0];
+    endgenerate
-    assign out_of_range = 1'b0;
 
     //------------------------------------------------------------
     // DAC -> ADC CDC
     //------------------------------------------------------------
-    always_ff @(posedge adc_clk_in or posedge adc_rst) begin
+    logic [2:0] stretch;    // 125/65~=2. Чтобы поймать единичный импульс, растянем его во времени
-        if (adc_rst) begin
+    logic [1:0] sync_DA;
-            sample_req <= 1'b0;
+    wire        dac_done_stretched;
-            sample_req_sync2  <= 1'b0;
+    
-            sample_req_sync3 <= 1'b0;
+    always_ff @(posedge clk_dac or posedge rst_dac)
-        end
+    begin
+        if (rst_dac)
+            stretch <= 0;
         else begin
-            sample_req_sync2 <= sample_req_sync1;
+            stretch[0] <= dac_done;
-            sample_req_sync3  <= sample_req_sync2;
+            stretch[1] <= stretch[0];
-            sample_req <= sample_req_sync3;
+            stretch[2] <= stretch[1];
         end
     end
+    assign dac_done_stretched = |stretch;
+
+    always_ff @(posedge clk_adc or posedge rst_adc) begin
+        if (rst_adc)
+            sync_DA <= 0;
+        else begin
+            sync_DA[0] <= dac_done_stretched;
+            sync_DA[1] <= sync_DA[0];
+        end
+    end
+    assign adc_request = sync_DA[1];
 
     //------------------------------------------------------------
     // ADC -> DAC CDC
     //------------------------------------------------------------
-    always_ff @(posedge dac_clk_in or posedge dac_rst) begin
+    logic [1:0] sync_AD;
-        if (dac_rst) begin
+
-            sample_done <= 1'b0;
+    always_ff @(posedge clk_dac or posedge rst_dac) begin
-            sample_done_sync2 <= 1'b0;
+        if (rst_dac)
-            sample_done_sync3 <= 1'b0;
+            sync_AD <= 0;
-        end
         else begin
-            sample_done_sync2 <= sample_done_sync1;
+            sync_AD[0] <= adc_done;
-            sample_done_sync3 <= sample_done_sync2;
+            sync_AD[1] <= sync_AD[0];
-            sample_done <= sample_done_sync3;
         end
     end
+    assign dac_request = sync_AD[1];
 
     //------------------------------------------------------------
     // Generator
     //------------------------------------------------------------
     generator #(
-        .DATA_WIDTH(DAC_DATA_WIDTH)
+        .DATA_WIDTH(DAC_DATA_WIDTH),
+        .ZERO_LEVEL(ZERO_LEVEL)
     ) generator_inst (
-        .clk_in(dac_clk_in),
+        .clk_dac(clk_dac),
-        .rst(dac_rst),
+        .rst(rst_dac),
-        .start(dac_start),
+        .start(start),
-
         .pulse_width(pulse_width),
         .pulse_period(pulse_period),
         .pulse_height(pulse_height),
         .pulse_num(pulse_num),
-
+        .dac_out(dac_signal),
-        .sample_done(sample_done),
+        .request(dac_request),
-
+        .done(dac_done)
-        .pulse(pulse),
-        .pulse_height_out(pulse_height_out),
-        .sample_req(sample_req_sync1)
     );
 
     //------------------------------------------------------------
@@ -119,18 +143,15 @@ module sync_top
         .PACK_FACTOR(PACK_FACTOR),
         .PROCESS_MODE(PROCESS_MODE)
     ) sampler_inst (
-        .clk_in(adc_clk_in),
+        .clk_in(clk_adc),
-        .rst(adc_rst),
+        .rst(rst_adc),
-
+        .data_in(adc_signal),
-        .data_in(data_in),
         .out_of_range(out_of_range),
-
         .smp_num(smp_num),
-        .sample_req(sample_req),
-
         .m_axis_tdata(m_axis_tdata),
         .m_axis_tvalid(m_axis_tvalid),
-        .sample_done(sample_done_sync1)
+        .request(adc_request),
+        .done(adc_done)
     );
 
 endmodule

designs/adc_dac_synchoronizer/tb_sync_top.sv

@@ -2,39 +2,50 @@
 
 module tb_top;
 
-    localparam DAC_DATA_WIDTH = 14;
+    //------------------------------------------------------------
-    localparam ADC_DATA_WIDTH = 12;
+    // Параметры
-    localparam PACK_FACTOR    = 1;
+    //------------------------------------------------------------
-    localparam PROCESS_MODE   = 0;
+    parameter string ZERO_LEVEL_PARAM = "logic"; // "logic" VS "true"
+    parameter VERBOSE = 1;
+    
+    localparam DAC_DATA_WIDTH       = 14;
+    localparam ADC_DATA_WIDTH       = 12;
+    localparam PACK_FACTOR          = 1;
+    localparam PROCESS_MODE         = 0;
+    localparam CLK_DAC_PERIOD       = 8;
+    localparam CLK_ADC_PERIOD       = 15.385;
+    localparam USE_DELAY_LINE       = 0;
+    localparam LOGIC_ZERO_LEVEL     = 0; // DAC -5V for logic zero
+    localparam VOLTAGE_ZERO_LEVEL   = 2**(DAC_DATA_WIDTH-1); // DAC 0V for logic zero
+    localparam ZERO_LEVEL           = (ZERO_LEVEL_PARAM == "logic") ? LOGIC_ZERO_LEVEL : VOLTAGE_ZERO_LEVEL;
+
+    localparam CLOCK_DEVIATION      = 3; // Maximum clock deviation of pulse stats
 
     //------------------------------------------------------------
-    // clocks / reset
+    // Тактовые сигналы и сброс
     //------------------------------------------------------------
-    logic adc_clk_in;
+    logic clk_dac;
-    logic adc_rst;
+    logic rst_dac;
-
+    logic clk_adc;
-    logic dac_clk_in;
+    logic rst_adc;
-    logic dac_rst;
-
     //------------------------------------------------------------
-    // control
+    // Управление и конфиг
     //------------------------------------------------------------
     logic dac_start;
-
+    logic [31:0]                pulse_width;
-    logic [31:0] pulse_width;
+    logic [31:0]                pulse_period;
-    logic [31:0] pulse_period;
+    logic [DAC_DATA_WIDTH-1:0]  pulse_height;
-    logic [DAC_DATA_WIDTH-1:0] pulse_height;
+    logic [15:0]                pulse_num;
-    logic [15:0] pulse_num;
+    logic [31:0]                smp_num;
-    logic [31:0] smp_num;
-
     //------------------------------------------------------------
-    // outputs
+    // Входы
     //------------------------------------------------------------
-    logic [ADC_DATA_WIDTH*PACK_FACTOR-1:0] m_axis_tdata;
+    reg out_of_range;
-    logic                                  m_axis_tvalid;
+    //------------------------------------------------------------
-
+    // Выходы
-    integer valid_count;
+    //------------------------------------------------------------
-
+    wire [ADC_DATA_WIDTH*PACK_FACTOR-1:0] m_axis_tdata;
+    wire                                  m_axis_tvalid;
     //------------------------------------------------------------
     // DUT
     //------------------------------------------------------------
@@ -42,127 +53,521 @@ module tb_top;
         .DAC_DATA_WIDTH(DAC_DATA_WIDTH),
         .ADC_DATA_WIDTH(ADC_DATA_WIDTH),
         .PACK_FACTOR(PACK_FACTOR),
-        .PROCESS_MODE(PROCESS_MODE)
+        .PROCESS_MODE(PROCESS_MODE),
+        .ZERO_LEVEL(ZERO_LEVEL),
+        .USE_DELAY_LINE(USE_DELAY_LINE)
     ) dut (
-        .adc_clk_in(adc_clk_in),
+        .clk_adc(clk_adc),
-        .adc_rst(adc_rst),
+        .clk_dac(clk_dac),
-
+        .rst_adc(rst_adc),
-        .dac_clk_in(dac_clk_in),
+        .rst_dac(rst_dac),
-        .dac_rst(dac_rst),
+        .start(dac_start),
-
-        .dac_start(dac_start),
-
         .pulse_width(pulse_width),
         .pulse_period(pulse_period),
         .pulse_height(pulse_height),
         .pulse_num(pulse_num),
         .smp_num(smp_num),
-
         .m_axis_tdata(m_axis_tdata),
-        .m_axis_tvalid(m_axis_tvalid)
+        .m_axis_tvalid(m_axis_tvalid),
+        .out_of_range(out_of_range)
     );
 
-    //------------------------------------------------------------
+    // Тактовые сигналы
-    // ADC clock
-    //------------------------------------------------------------
     initial begin
-        adc_clk_in = 1'b0;
+        clk_adc = 0;
-        forever #5 adc_clk_in = ~adc_clk_in;   // 100 MHz
+        forever #(CLK_ADC_PERIOD/2) clk_adc = ~clk_adc;
+    end
+    initial begin
+        clk_dac = 0;
+        forever #(CLK_DAC_PERIOD/2) clk_dac = ~clk_dac;
     end
 
-    //------------------------------------------------------------
+    // === Таски для тестирования ===
-    // DAC clock
+    // Функция модуля
-    //------------------------------------------------------------
+    function automatic real fabs(real val);
-    initial begin
+        return (val < 0.0) ? -val : val;
-        dac_clk_in = 1'b0;
+    endfunction
-        forever #8 dac_clk_in = ~dac_clk_in;   // slower domain
-    end
 
-    //------------------------------------------------------------
+    `define MIN(x, y) (((x) < (y)) ? (x) : (y))
-    // monitor output stream
-    //------------------------------------------------------------
-    always @(posedge adc_clk_in) begin
-        if (m_axis_tvalid) begin
-            valid_count = valid_count + 1;
 
-            $display("[%0t] VALID: data=%0d",
+    // Таска сброса DAC DUT
-                     $time,
+    task automatic reset_dut_dac(
-                     m_axis_tdata);
+        input int rst_duration    // сколько тактов держать сброс
+    );
+        @(negedge clk_dac);
+        rst_dac <= 1;
+        repeat(rst_duration) @(negedge clk_dac);
+        rst_dac <= 0;
+    endtask
+
+    // Таска сброса ADC DUT
+    task automatic reset_dut_adc(
+        input int rst_duration    // сколько тактов держать сброс
+    );
+        @(negedge clk_adc);
+        rst_adc <= 1;
+        repeat(rst_duration) @(negedge clk_adc);
+        rst_adc <= 0;
+    endtask
+
+    // Таска запуска DUT
+    task automatic start_dut(
+        input int start_duration    // сколько тактов держать импульс
+    );
+        @(negedge clk_dac); // to make signal stable
+        dac_start <= 1;
+        repeat(start_duration) @(negedge clk_dac);
+        dac_start <= 0;
+    endtask
+
+    // Таска конфигурации DUT
+    task automatic set_config(
+        input logic [31:0]                  w,  // ширина импульса
+        input logic [31:0]                  p,  // период импульса
+        input logic [15:0]                  n,  // количество импульсов
+        input logic [DAC_DATA_WIDTH-1:0]    h,  // высота импульса
+        input logic [31:0]                  sn  // число сэмплов
+    );
+        // Задаем конфигурационные регистры
+        pulse_width  <= w;
+        pulse_period <= p;
+        pulse_num    <= n;
+        pulse_height <= h;
+        smp_num      <= sn;
+    endtask
+    
+    // Основная таска проверки DUT
+    task automatic run_test_case(
+        input int pulse_width,
+        input int pulse_period,
+        input int pulse_height,
+        input int pulse_num,
+        input int sample_num,
+        input bit skip_reset,
+        input bit randomize_start_timing,
+        input bit out_of_range_val,
+        input bit randomize_out_of_range
+    );
+        int error_flag = 0;
+        int start_hold_time = 1;
+        realtime sync_start_time, pulse_start_time, pulse_update_val_time;
+        realtime sync_time_stats[$], pulse_width_time_stats[$], pulse_period_time_stats[$], pulse_delay_time_stats[$];
+        realtime avearge_pulse_delay, average_pulse_width, average_pulse_period, average_sync_time;
+
+        out_of_range = out_of_range_val;
+
+        if (VERBOSE >= 2) begin
+            $display("[TB] -run_test_case- Starting test case");
         end
-    end
 
-    //------------------------------------------------------------
+        if (randomize_out_of_range)
-    // test
+            fork
-    //------------------------------------------------------------
+                begin : randomize_out_of_range_proc
+                    forever begin
+                        @(posedge clk_adc);
+                        out_of_range = $urandom_range(0, 1);
+                    end
+                end
+            join_none
+
+        if (!skip_reset) 
+            fork
+                reset_dut_adc(1);
+                reset_dut_dac(1);
+            join
+
+        set_config(
+            .w(pulse_width),
+            .p(pulse_period),
+            .n(pulse_num),
+            .h(pulse_height),
+            .sn(sample_num)
+        );
+        @(posedge clk_dac);
+        @(posedge clk_dac);
+
+        if (randomize_start_timing)
+            start_hold_time = $urandom_range(1, 15);
+        fork    // warning: check not forever
+            start_dut(start_hold_time);
+            begin
+                @(posedge clk_dac);
+                //  старт первой синхронизации
+                sync_start_time = $realtime;
+            end
+        join_none
+
+        if (VERBOSE >= 2) begin
+            $display("[TB] -run_test_case- Starting pulse generation");
+        end
+
+        for (int i = 0; i < pulse_num; i++) begin
+            if (VERBOSE >= 3) begin
+                $display("[TB] -run_test_case- Start sync for pulse #%d", i);
+            end
+            @(posedge m_axis_tvalid);
+            if (VERBOSE >= 3) begin
+                $display("[TB] -run_test_case- Found valid pulse response data positive front");
+            end
+            // Старт цикла. Завершение синхронизации
+            sync_time_stats.push_back($realtime - sync_start_time);
+            pulse_start_time = $realtime;
+            
+            fork
+                // Поток будет запущен для ненулевых импульсов и гарантированно завершится как только зафиксирует статистику импульса
+                // Начало импульса
+                if (pulse_height != ZERO_LEVEL && pulse_width != 0) begin
+                    if (VERBOSE >= 4) begin
+                        $display("[TB] -run_test_case- Wait until pulse become high");
+                    end
+                    wait(m_axis_tdata != ZERO_LEVEL);
+                    // Фактическое начало импульса. Поступление высокого уровня
+                    pulse_update_val_time = $realtime;
+                    pulse_delay_time_stats.push_back(pulse_update_val_time - pulse_start_time);
+                    
+                    // Проверим что высота импульса совпала с заданной. Т.к. OTR != 0 влияет на выходные данные сэмплера, то не будем проверять такие случаи.
+                    @(posedge clk_adc);
+                    #1.5;   //  Ожидание завершения переходных процессов
+                    // Будем считать что из-за OTR данные изменились (по условию OTR + MSB), проверка пропускается, т.к. сложно понять точное значение OTR в момент обработки данных от tdata
+                    if (m_axis_tdata != (pulse_height >> 2) && (randomize_out_of_range || out_of_range_val)) begin
+                        $display("[ERROR] -run_test_case- Wrong pulse height: %d. Must be: %d", m_axis_tdata, pulse_height >> 2);
+                        $finish;
+                    end
+                    
+                    if (VERBOSE >= 4) begin
+                        $display("[TB] -run_test_case- Wait until pulse become low");
+                    end
+                    wait(m_axis_tdata == ZERO_LEVEL);
+                    pulse_width_time_stats.push_back($realtime - pulse_update_val_time);
+                end
+                // Конец импульса
+            join_none
+            
+            @(negedge m_axis_tvalid);
+            if (VERBOSE >= 3) begin
+                $display("[TB] -run_test_case- Found valid pulse response data negative front");
+            end
+            // Завершение цикла. Старт синхронизации
+            pulse_period_time_stats.push_back($realtime - pulse_start_time);
+            sync_start_time = $realtime;
+        end
+
+        if (VERBOSE >= 2) begin
+            $display("[TB] -run_test_case- Stop pulse generation");
+        end
+
+        fork    //  Проверка с таймаутом на лишние циклы
+            @(posedge m_axis_tvalid);
+            repeat(30) @(posedge clk_adc);
+        join_any
+        if (m_axis_tvalid == 1) begin
+            $display("[ERROR] -run_test_case- Extra pulse cycle num. More than must be.");
+            $finish;
+        end
+
+        if (VERBOSE >= 2) begin
+            $display("[TB] -run_test_case- Exit waiting via timeout");
+        end
+
+        if (randomize_out_of_range) begin
+            disable randomize_out_of_range_proc;
+            if (VERBOSE >= 2) begin
+                $display("[TB] -run_test_case- Stop randomize_out_of_range_proc");
+            end
+        end
+        out_of_range = 0;
+
+        // Проверка по статистике. Подсчет средних значений
+        if (pulse_delay_time_stats.size() != pulse_num && pulse_height != ZERO_LEVEL && pulse_width != 0 && !(randomize_out_of_range || out_of_range_val)) begin //  Detected with pulse level. Skip if pulse level undetectable
+            $display("[ERROR] -run_test_case- Size of pulse_delay_time_stats samples not equal to pulse_num: %d VS %d", pulse_delay_time_stats.size(), pulse_num);
+            $finish;
+        end
+        if (pulse_width_time_stats.size() != pulse_num && pulse_height != ZERO_LEVEL && pulse_width != 0 && !(randomize_out_of_range || out_of_range_val)) begin //  Detected with pulse level. Skip if pulse level undetectable
+            $display("[ERROR] -run_test_case- Size of pulse_width_time_stats samples not equal to pulse_num: %d VS %d", pulse_width_time_stats.size(), pulse_num);
+            $finish;
+        end
+        if (pulse_period_time_stats.size() != pulse_num) begin
+            $display("[ERROR] -run_test_case- Size of pulse_period_time_stats samples not equal to pulse_num: %d VS %d", pulse_period_time_stats.size(), pulse_num);
+            $finish;
+        end
+        if (sync_time_stats.size() != pulse_num) begin
+            $display("[ERROR] -run_test_case- Size of sync_time_stats samples not equal to pulse_num: %d VS %d", sync_time_stats.size(), pulse_num);
+            $finish;
+        end
+
+        avearge_pulse_delay = 0;
+        foreach (pulse_delay_time_stats[i])
+            avearge_pulse_delay += pulse_delay_time_stats[i];
+        avearge_pulse_delay /= pulse_num;
+
+        average_pulse_width = 0;
+        foreach (pulse_width_time_stats[i])
+            average_pulse_width += pulse_width_time_stats[i];
+        average_pulse_width /= pulse_num;
+
+        average_pulse_period = 0;
+        foreach (pulse_period_time_stats[i])
+            average_pulse_period += pulse_period_time_stats[i];
+        average_pulse_period /= pulse_num;
+
+        average_sync_time = 0;
+        foreach (sync_time_stats[i])
+            average_sync_time += sync_time_stats[i];
+        average_sync_time /= pulse_num;
+        
+        if (VERBOSE >= 1) begin
+            $display("[TB] -run_test_case- Pulse test stats:\n\tavearge_pulse_delay: %0.3f\n\taverage_pulse_width: %0.3f\n\taverage_pulse_period: %0.3f\n\taverage_sync_time: %0.3f", avearge_pulse_delay, average_pulse_width, average_pulse_period, average_sync_time);
+        end
+
+        if (avearge_pulse_delay > CLOCK_DEVIATION * CLK_ADC_PERIOD) begin
+            $display("[ERROR] -run_test_case- avearge_pulse_delay too big: %0.3f", avearge_pulse_delay);
+            error_flag = 1;
+        end
+        if (fabs(average_pulse_width - pulse_width * CLK_DAC_PERIOD * (pulse_height != ZERO_LEVEL)) > CLOCK_DEVIATION * CLK_ADC_PERIOD && sample_num * CLK_ADC_PERIOD >= pulse_width * CLK_DAC_PERIOD) begin
+            $display("[ERROR] -run_test_case- average_pulse_width deviates from choosen pulse_width. Deviation: %0.3f > %0.3f ns", fabs(average_pulse_width - pulse_width * CLK_DAC_PERIOD), CLOCK_DEVIATION * CLK_ADC_PERIOD);
+            error_flag = 1;
+        end
+        if (fabs(average_pulse_period - sample_num * CLK_ADC_PERIOD) > CLOCK_DEVIATION * CLK_ADC_PERIOD) begin
+            $display("[ERROR] -run_test_case- average_pulse_period deviates from choosen pulse_width. Deviation: %0.3f > %0.3f ns", fabs(average_pulse_period - sample_num * CLK_ADC_PERIOD), CLOCK_DEVIATION * CLK_ADC_PERIOD);
+            error_flag = 1;
+        end
+
+        if (VERBOSE >= 2) begin
+            $display("[TB] -run_test_case- Pass error processing");
+        end
+
+        if (error_flag)
+            $finish;
+
+        if (VERBOSE >= 2) begin
+            $display("[TB] -run_test_case- Passed checks");
+        end
+    endtask
+    // Таска 
+
+    // --- ОСНОВНОЙ ПРОЦЕСС ТЕСТИРОВАНИЯ ---
     initial begin
+        $display("[TB] Tests start");
 
-        adc_rst      = 1'b1;
+        // Инициализация
-        dac_rst      = 1'b1;
+        dac_start    = 0;
-
-        dac_start    = 1'b0;
-
         pulse_width  = 0;
         pulse_period = 0;
         pulse_height = 0;
         pulse_num    = 0;
         smp_num      = 0;
+        out_of_range = 0;
+        rst_adc      = 0;
+        rst_dac      = 0;
 
-        valid_count  = 0;
+        #100; // init
 
-        //--------------------------------------------------------
+        $display("[TB] Test 1. Simple test. (1/4)");
-        // reset
+        run_test_case(
-        //--------------------------------------------------------
+            .pulse_width(50),
-        repeat (10) @(posedge adc_clk_in);
+            .pulse_period(125),
-        repeat (10) @(posedge dac_clk_in);
+            .pulse_height(2**DAC_DATA_WIDTH-1),
+            .pulse_num(5),
+            .sample_num(65),
+            .skip_reset(0),
+            .randomize_start_timing(1),
+            .out_of_range_val(0),
+            .randomize_out_of_range(0)
+        );
+        $display("[TB] Test 1. Simple test. (2/4)");
+        run_test_case(
+            .pulse_width(25),
+            .pulse_period(125),
+            .pulse_height(2**(ADC_DATA_WIDTH-1)),
+            .pulse_num(10),
+            .sample_num(65),
+            .skip_reset(1),
+            .randomize_start_timing(1),
+            .out_of_range_val(0),
+            .randomize_out_of_range(0)
+        );
+        $display("[TB] Test 1. Simple test. (3/4)");
+        run_test_case(
+            .pulse_width(10),
+            .pulse_period(50),
+            .pulse_height(ZERO_LEVEL),
+            .pulse_num(4),
+            .sample_num(25),
+            .skip_reset(1),
+            .randomize_start_timing(1),
+            .out_of_range_val(0),
+            .randomize_out_of_range(0)
+        );
 
-        adc_rst = 1'b0;
+        $display("[TB] Test 1. Simple test. (4/4)");
-        dac_rst = 1'b0;
+        run_test_case(
+            .pulse_width(25),
+            .pulse_period(125),
+            .pulse_height(2**(DAC_DATA_WIDTH-1)),
+            .pulse_num(10),
+            .sample_num(65),
+            .skip_reset(1),
+            .randomize_start_timing(1),
+            .out_of_range_val(0),
+            .randomize_out_of_range(0)
+        );
+        $display("[TB] Test 1 complete");
+        
+        $display("[TB] Test 2. Edge cases. Pulse width 0%%. (1/7)");
+        run_test_case(
+            .pulse_width(0),
+            .pulse_period(125),
+            .pulse_height(2**(ADC_DATA_WIDTH-1)),
+            .pulse_num(5),
+            .sample_num(65),
+            .skip_reset(1),
+            .randomize_start_timing(1),
+            .out_of_range_val(0),
+            .randomize_out_of_range(0)
+        );
+        $display("[TB] Test 2. Edge cases. Pulse width 100%%. (2/7)");
+        run_test_case(
+            .pulse_width(10),
+            .pulse_period(10),
+            .pulse_height(2**(ADC_DATA_WIDTH-1)),
+            .pulse_num(5),
+            .sample_num(65),
+            .skip_reset(1),
+            .randomize_start_timing(1),
+            .out_of_range_val(0),
+            .randomize_out_of_range(0)
+        );
+        $display("[TB] Test 2. Edge cases. Pulse height == ZERO_LEVEL. (3/7)");
+        run_test_case(
+            .pulse_width(10),
+            .pulse_period(125),
+            .pulse_height(ZERO_LEVEL),
+            .pulse_num(5),
+            .sample_num(65),
+            .skip_reset(1),
+            .randomize_start_timing(1),
+            .out_of_range_val(0),
+            .randomize_out_of_range(0)
+        );
+        $display("[TB] Test 2. Edge cases. Pulse num == 0. (4/7)");
+        run_test_case(
+            .pulse_width(10),
+            .pulse_period(125),
+            .pulse_height(2**(ADC_DATA_WIDTH-3)),
+            .pulse_num(0),
+            .sample_num(65),
+            .skip_reset(1),
+            .randomize_start_timing(1),
+            .out_of_range_val(0),
+            .randomize_out_of_range(0)
+        );
 
-        repeat (5) @(posedge dac_clk_in);
+        $display("[TB] Test 2. Edge cases. Sample num time << Pulse width time. (5/7)");
+        run_test_case(
+            .pulse_width(10),
+            .pulse_period(125),
+            .pulse_height(2**(ADC_DATA_WIDTH-1)),
+            .pulse_num(5),
+            .sample_num(2),
+            .skip_reset(1),
+            .randomize_start_timing(1),
+            .out_of_range_val(0),
+            .randomize_out_of_range(0)
+        );
 
-        //--------------------------------------------------------
+        // Ожидание окончания работы генератора. Т.к. конец работы определяется по tvalid сэмплера, а он завершается сильно раньше. Чтобы не пропустить start следующей таски, ждем
-        // config
+        wait(dut.generator_inst.enable == 0);
-        //--------------------------------------------------------
+        #50;
-        pulse_width  = 32'd3;
-        pulse_period = 32'd8;
-        pulse_height = 14'd200;
-        pulse_num    = 16'd4;
-        smp_num      = 32'd8;
 
-        //--------------------------------------------------------
+        $display("[TB] Test 2. Edge cases. Sample num == 0. (6/7)");
-        // start
+        // Запустим в работу вручную, т.к. run_test_case обязательно ждет pulse num циклов. Детекция цикла производится по активности сэплера. Ее не должно быть при sample num = 0
-        //--------------------------------------------------------
+        set_config(
-        @(posedge dac_clk_in);
+            .w(10),
-        dac_start = 1'b1;
+            .p(125),
+            .h(2**(ADC_DATA_WIDTH-1)),
+            .n(5),
+            .sn(0)
+        );
+        start_dut(3);
+        fork
+            begin : wait_sampler_active_proc
+                @(posedge m_axis_tvalid);
+                $display("[ERROR] Sampler active with sample num == 0");
+                $finish;
+            end
+            begin
+                @(negedge dut.generator_inst.enable);
+            end
+        join_any
+        disable wait_sampler_active_proc;
+        repeat(30) @(posedge clk_adc);
+        
+        // Данный тест должен приводить к тому, что сэмплер будет давать крайние значения вместо заданного pulse height из-за OTR=1
+        // Дописать авто тест
+        $display("[TB] Test 2. Edge cases. OTR == 1. (7/7)");
+        run_test_case(
+            .pulse_width(10),
+            .pulse_period(125),
+            .pulse_height(10), // goes to 0x0..
+            .pulse_num(5),
+            .sample_num(65),
+            .skip_reset(1),
+            .randomize_start_timing(1),
+            .out_of_range_val(1),
+            .randomize_out_of_range(0)
+        );
+        $display("[TB] Test 2. Edge cases. OTR == 1. (7-2/7)");
+        run_test_case(
+            .pulse_width(10),
+            .pulse_period(125),
+            .pulse_height(14'b11010000000000), // goes to 0xff..
+            .pulse_num(5),
+            .sample_num(65),
+            .skip_reset(1),
+            .randomize_start_timing(1),
+            .out_of_range_val(1),
+            .randomize_out_of_range(0)
+        );
+        $display("[TB] Test 2 complete");
 
-        @(posedge dac_clk_in);
+        $display("[TB] Test 3. Random tests");
-        dac_start = 1'b0;
+        for (int i = 0; i < 100; i++) begin
+            int r_w, r_p, r_n, r_h, r_sn;
+            bit r_skip, r_otr, r_otr_rand;
 
-        $display("==================================");
+            // Генерируем параметры
-        $display("TEST START");
+            r_p    = $urandom_range(50, 150);          // Период от 5 до 50
-        $display("==================================");
+            r_w    = $urandom_range(10, r_p);         // Ширина не больше периода
+            r_n    = $urandom_range(1, 10);          // Количество импульсов
+            r_h    = $urandom_range(0, 2**(`MIN(ADC_DATA_WIDTH, DAC_DATA_WIDTH))-1);       // Высота импульса
+            r_sn   = $urandom_range(2, 40);          // Число сэмплов
+            r_skip = $urandom_range(0, 1);           // Случайный сброс (0 - сброс, 1 - пропуск)
+            r_otr  = 0;           // Out Of Range стартовое значение
+            r_otr_rand = 0;       // Сделать OTR случайным
 
-        //--------------------------------------------------------
+            if (VERBOSE >= 1)
-        // wait
+                $display("[TB] --- Test #%0d (Config: W=%0d, P=%0d, N=%0d, H=%0d, SN=%0d, SkipReset=%0b) ---", 
-        //--------------------------------------------------------
+                        i+1, r_w, r_p, r_n, r_h, r_sn, r_skip);
-        repeat (600) @(posedge adc_clk_in);
+                
+            run_test_case(
+                .pulse_width(r_w),
+                .pulse_period(r_p),
+                .pulse_height(r_h),
+                .pulse_num(r_n),
+                .sample_num(r_sn),
+                .skip_reset(r_skip),
+                .randomize_start_timing(0),
+                .out_of_range_val(r_otr),
+                .randomize_out_of_range(r_otr_rand)
+            );
 
-        //--------------------------------------------------------
+            wait(dut.generator_inst.enable == 0);   //  Проверка на завершение работы
-        // check
+            #50;
-        //--------------------------------------------------------
-        if (valid_count > 0) begin
-            $display("==================================");
-            $display("TEST PASSED");
-            $display("valid_count = %0d", valid_count);
-            $display("==================================");
         end
-        else begin
+        $display("[TB] Test 3 complete");
-            $display("==================================");
+        
-            $display("TEST FAILED");
+        $display("[TB] ALL PASSED");
-            $display("No valid output detected");
+        $display("[TB] Maximum clock deviation of stats %0.2f", CLOCK_DEVIATION);
-            $display("==================================");
-        end
-
         $finish;
     end
 

designs/eth_ctrl_debug/Makefile

@@ -1,52 +0,0 @@
-# SPDX-License-Identifier: MIT
-#
-# Copyright (c) 2025 FPGA Ninja, LLC
-#
-# Authors:
-# - Alex Forencich
-#
-
-# FPGA settings
-FPGA_PART = xc7a35tfgg484-1
-FPGA_TOP = eth_ctrl_debug_top
-FPGA_ARCH = artix7
-
-RTL_DIR = ../../rtl
-
-
-include ../../scripts/vivado.mk
-
-SYN_FILES += eth_ctrl_debug.sv
-SYN_FILES += $(sort $(shell find ../../rtl -type f \( -name '*.v' -o -name '*.sv' \)))
-
-XCI_FILES = $(sort $(shell find ../../rtl/ethernet-udp/src -type f -name '*.xci'))
-XCI_FILES += $(sort $(shell find ip/ -type f -name '*.xci'))
-
-XDC_FILES += ../../constraints/ax7a035b.xdc
-XDC_FILES += debug.xdc
-
-
-
-program: $(PROJECT).bit
-	echo "open_hw_manager" > program.tcl
-	echo "connect_hw_server" >> program.tcl
-	echo "open_hw_target" >> program.tcl
-	echo "current_hw_device [lindex [get_hw_devices] 0]" >> program.tcl
-	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> program.tcl
-	echo "set_property PROGRAM.FILE {$(PROJECT).bit} [current_hw_device]" >> program.tcl
-	echo "program_hw_devices [current_hw_device]" >> program.tcl
-	echo "exit" >> program.tcl
-	vivado -nojournal -nolog -mode batch -source program.tcl
-
-$(PROJECT).mcs $(PROJECT).prm: $(PROJECT).bit
-	echo "write_cfgmem -force -format mcs -size 16 -interface SPIx4 -loadbit {up 0x0000000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
-	echo "exit" >> generate_mcs.tcl
-	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
-	mkdir -p rev
-	COUNT=100; \
-	while [ -e rev/$*_rev$$COUNT.bit ]; \
-	do COUNT=$$((COUNT+1)); done; \
-	COUNT=$$((COUNT-1)); \
-	for x in .mcs .prm; \
-	do cp $*$$x rev/$*_rev$$COUNT$$x; \
-	echo "Output: rev/$*_rev$$COUNT$$x"; done;

designs/eth_ctrl_debug/README.md

@@ -1,7 +0,0 @@
-# Тестовый проект Eth + CTRL
-Проект состоит из AXIS Ethernet и контроллера. Для тестирования сделано три разных частотных домена: ethernet 125MHz, DAC 130MHz, ADC 65MHz для тестирования сихронизации. Есть ILA на все выходы контроллера и на шину AXIS eth -> ctrl. Для отправки пакетов используйте скрипт ```console.py --debug```.
-
-## Сборка
-```make all``` - собрать все до битстрима
-
-```make vivado``` - открыть проект в Vivado

designs/eth_ctrl_debug/debug.xdc

@@ -1,147 +0,0 @@
-set_clock_groups -name ASYNC_UDP_CTRL -asynchronous -group [get_clocks rgmii_rxc] -group [get_clocks clk_out1_clk_wiz_ctrl_inst] -group [get_clocks clk_out2_clk_wiz_ctrl_inst]
-
-
-
-
-create_debug_core u_ila_0 ila
-set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_0]
-set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_0]
-set_property C_ADV_TRIGGER false [get_debug_cores u_ila_0]
-set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_0]
-set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_0]
-set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_0]
-set_property C_TRIGIN_EN false [get_debug_cores u_ila_0]
-set_property C_TRIGOUT_EN false [get_debug_cores u_ila_0]
-set_property port_width 1 [get_debug_ports u_ila_0/clk]
-connect_debug_port u_ila_0/clk [get_nets [list clk_wiz_ctrl_inst/inst/clk_out2]]
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe0]
-set_property port_width 32 [get_debug_ports u_ila_0/probe0]
-connect_debug_port u_ila_0/probe0 [get_nets [list {adc_pulse_period_dbg[0]} {adc_pulse_period_dbg[1]} {adc_pulse_period_dbg[2]} {adc_pulse_period_dbg[3]} {adc_pulse_period_dbg[4]} {adc_pulse_period_dbg[5]} {adc_pulse_period_dbg[6]} {adc_pulse_period_dbg[7]} {adc_pulse_period_dbg[8]} {adc_pulse_period_dbg[9]} {adc_pulse_period_dbg[10]} {adc_pulse_period_dbg[11]} {adc_pulse_period_dbg[12]} {adc_pulse_period_dbg[13]} {adc_pulse_period_dbg[14]} {adc_pulse_period_dbg[15]} {adc_pulse_period_dbg[16]} {adc_pulse_period_dbg[17]} {adc_pulse_period_dbg[18]} {adc_pulse_period_dbg[19]} {adc_pulse_period_dbg[20]} {adc_pulse_period_dbg[21]} {adc_pulse_period_dbg[22]} {adc_pulse_period_dbg[23]} {adc_pulse_period_dbg[24]} {adc_pulse_period_dbg[25]} {adc_pulse_period_dbg[26]} {adc_pulse_period_dbg[27]} {adc_pulse_period_dbg[28]} {adc_pulse_period_dbg[29]} {adc_pulse_period_dbg[30]} {adc_pulse_period_dbg[31]}]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe1]
-set_property port_width 8 [get_debug_ports u_ila_0/probe1]
-connect_debug_port u_ila_0/probe1 [get_nets [list {finish_cnt[0]} {finish_cnt[1]} {finish_cnt[2]} {finish_cnt[3]} {finish_cnt[4]} {finish_cnt[5]} {finish_cnt[6]} {finish_cnt[7]}]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe2]
-set_property port_width 16 [get_debug_ports u_ila_0/probe2]
-connect_debug_port u_ila_0/probe2 [get_nets [list {adc_pulse_num_dbg[0]} {adc_pulse_num_dbg[1]} {adc_pulse_num_dbg[2]} {adc_pulse_num_dbg[3]} {adc_pulse_num_dbg[4]} {adc_pulse_num_dbg[5]} {adc_pulse_num_dbg[6]} {adc_pulse_num_dbg[7]} {adc_pulse_num_dbg[8]} {adc_pulse_num_dbg[9]} {adc_pulse_num_dbg[10]} {adc_pulse_num_dbg[11]} {adc_pulse_num_dbg[12]} {adc_pulse_num_dbg[13]} {adc_pulse_num_dbg[14]} {adc_pulse_num_dbg[15]}]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe3]
-set_property port_width 1 [get_debug_ports u_ila_0/probe3]
-connect_debug_port u_ila_0/probe3 [get_nets [list adc_rst_dbg]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe4]
-set_property port_width 1 [get_debug_ports u_ila_0/probe4]
-connect_debug_port u_ila_0/probe4 [get_nets [list adc_start_dbg]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe5]
-set_property port_width 1 [get_debug_ports u_ila_0/probe5]
-connect_debug_port u_ila_0/probe5 [get_nets [list finish_dbg]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe6]
-set_property port_width 1 [get_debug_ports u_ila_0/probe6]
-connect_debug_port u_ila_0/probe6 [get_nets [list finish_pending]]
-create_debug_core u_ila_1 ila
-set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_1]
-set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_1]
-set_property C_ADV_TRIGGER false [get_debug_cores u_ila_1]
-set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_1]
-set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_1]
-set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_1]
-set_property C_TRIGIN_EN false [get_debug_cores u_ila_1]
-set_property C_TRIGOUT_EN false [get_debug_cores u_ila_1]
-set_property port_width 1 [get_debug_ports u_ila_1/clk]
-connect_debug_port u_ila_1/clk [get_nets [list rgmii_rxc_IBUF_BUFG]]
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe0]
-set_property port_width 2 [get_debug_ports u_ila_1/probe0]
-connect_debug_port u_ila_1/probe0 [get_nets [list {axis_mac0/rx_state[0]} {axis_mac0/rx_state[1]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe1]
-set_property port_width 16 [get_debug_ports u_ila_1/probe1]
-connect_debug_port u_ila_1/probe1 [get_nets [list {axis_mac0/udp_rec_data_length[0]} {axis_mac0/udp_rec_data_length[1]} {axis_mac0/udp_rec_data_length[2]} {axis_mac0/udp_rec_data_length[3]} {axis_mac0/udp_rec_data_length[4]} {axis_mac0/udp_rec_data_length[5]} {axis_mac0/udp_rec_data_length[6]} {axis_mac0/udp_rec_data_length[7]} {axis_mac0/udp_rec_data_length[8]} {axis_mac0/udp_rec_data_length[9]} {axis_mac0/udp_rec_data_length[10]} {axis_mac0/udp_rec_data_length[11]} {axis_mac0/udp_rec_data_length[12]} {axis_mac0/udp_rec_data_length[13]} {axis_mac0/udp_rec_data_length[14]} {axis_mac0/udp_rec_data_length[15]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe2]
-set_property port_width 96 [get_debug_ports u_ila_1/probe2]
-connect_debug_port u_ila_1/probe2 [get_nets [list {udp_ctrl_inst/cfg_bus_eth[0]} {udp_ctrl_inst/cfg_bus_eth[1]} {udp_ctrl_inst/cfg_bus_eth[2]} {udp_ctrl_inst/cfg_bus_eth[3]} {udp_ctrl_inst/cfg_bus_eth[4]} {udp_ctrl_inst/cfg_bus_eth[5]} {udp_ctrl_inst/cfg_bus_eth[6]} {udp_ctrl_inst/cfg_bus_eth[7]} {udp_ctrl_inst/cfg_bus_eth[8]} {udp_ctrl_inst/cfg_bus_eth[9]} {udp_ctrl_inst/cfg_bus_eth[10]} {udp_ctrl_inst/cfg_bus_eth[11]} {udp_ctrl_inst/cfg_bus_eth[12]} {udp_ctrl_inst/cfg_bus_eth[13]} {udp_ctrl_inst/cfg_bus_eth[14]} {udp_ctrl_inst/cfg_bus_eth[15]} {udp_ctrl_inst/cfg_bus_eth[16]} {udp_ctrl_inst/cfg_bus_eth[17]} {udp_ctrl_inst/cfg_bus_eth[18]} {udp_ctrl_inst/cfg_bus_eth[19]} {udp_ctrl_inst/cfg_bus_eth[20]} {udp_ctrl_inst/cfg_bus_eth[21]} {udp_ctrl_inst/cfg_bus_eth[22]} {udp_ctrl_inst/cfg_bus_eth[23]} {udp_ctrl_inst/cfg_bus_eth[24]} {udp_ctrl_inst/cfg_bus_eth[25]} {udp_ctrl_inst/cfg_bus_eth[26]} {udp_ctrl_inst/cfg_bus_eth[27]} {udp_ctrl_inst/cfg_bus_eth[28]} {udp_ctrl_inst/cfg_bus_eth[29]} {udp_ctrl_inst/cfg_bus_eth[30]} {udp_ctrl_inst/cfg_bus_eth[31]} {udp_ctrl_inst/cfg_bus_eth[32]} {udp_ctrl_inst/cfg_bus_eth[33]} {udp_ctrl_inst/cfg_bus_eth[34]} {udp_ctrl_inst/cfg_bus_eth[35]} {udp_ctrl_inst/cfg_bus_eth[36]} {udp_ctrl_inst/cfg_bus_eth[37]} {udp_ctrl_inst/cfg_bus_eth[38]} {udp_ctrl_inst/cfg_bus_eth[39]} {udp_ctrl_inst/cfg_bus_eth[40]} {udp_ctrl_inst/cfg_bus_eth[41]} {udp_ctrl_inst/cfg_bus_eth[42]} {udp_ctrl_inst/cfg_bus_eth[43]} {udp_ctrl_inst/cfg_bus_eth[44]} {udp_ctrl_inst/cfg_bus_eth[45]} {udp_ctrl_inst/cfg_bus_eth[46]} {udp_ctrl_inst/cfg_bus_eth[47]} {udp_ctrl_inst/cfg_bus_eth[48]} {udp_ctrl_inst/cfg_bus_eth[49]} {udp_ctrl_inst/cfg_bus_eth[50]} {udp_ctrl_inst/cfg_bus_eth[51]} {udp_ctrl_inst/cfg_bus_eth[52]} {udp_ctrl_inst/cfg_bus_eth[53]} {udp_ctrl_inst/cfg_bus_eth[54]} {udp_ctrl_inst/cfg_bus_eth[55]} {udp_ctrl_inst/cfg_bus_eth[56]} {udp_ctrl_inst/cfg_bus_eth[57]} {udp_ctrl_inst/cfg_bus_eth[58]} {udp_ctrl_inst/cfg_bus_eth[59]} {udp_ctrl_inst/cfg_bus_eth[60]} {udp_ctrl_inst/cfg_bus_eth[61]} {udp_ctrl_inst/cfg_bus_eth[62]} {udp_ctrl_inst/cfg_bus_eth[63]} {udp_ctrl_inst/cfg_bus_eth[64]} {udp_ctrl_inst/cfg_bus_eth[65]} {udp_ctrl_inst/cfg_bus_eth[66]} {udp_ctrl_inst/cfg_bus_eth[67]} {udp_ctrl_inst/cfg_bus_eth[68]} {udp_ctrl_inst/cfg_bus_eth[69]} {udp_ctrl_inst/cfg_bus_eth[70]} {udp_ctrl_inst/cfg_bus_eth[71]} {udp_ctrl_inst/cfg_bus_eth[72]} {udp_ctrl_inst/cfg_bus_eth[73]} {udp_ctrl_inst/cfg_bus_eth[74]} {udp_ctrl_inst/cfg_bus_eth[75]} {udp_ctrl_inst/cfg_bus_eth[76]} {udp_ctrl_inst/cfg_bus_eth[77]} {udp_ctrl_inst/cfg_bus_eth[78]} {udp_ctrl_inst/cfg_bus_eth[79]} {udp_ctrl_inst/cfg_bus_eth[80]} {udp_ctrl_inst/cfg_bus_eth[81]} {udp_ctrl_inst/cfg_bus_eth[82]} {udp_ctrl_inst/cfg_bus_eth[83]} {udp_ctrl_inst/cfg_bus_eth[84]} {udp_ctrl_inst/cfg_bus_eth[85]} {udp_ctrl_inst/cfg_bus_eth[86]} {udp_ctrl_inst/cfg_bus_eth[87]} {udp_ctrl_inst/cfg_bus_eth[88]} {udp_ctrl_inst/cfg_bus_eth[89]} {udp_ctrl_inst/cfg_bus_eth[90]} {udp_ctrl_inst/cfg_bus_eth[91]} {udp_ctrl_inst/cfg_bus_eth[92]} {udp_ctrl_inst/cfg_bus_eth[93]} {udp_ctrl_inst/cfg_bus_eth[94]} {udp_ctrl_inst/cfg_bus_eth[95]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe3]
-set_property port_width 16 [get_debug_ports u_ila_1/probe3]
-connect_debug_port u_ila_1/probe3 [get_nets [list {axis_mac0/rx_payload_len[0]} {axis_mac0/rx_payload_len[1]} {axis_mac0/rx_payload_len[2]} {axis_mac0/rx_payload_len[3]} {axis_mac0/rx_payload_len[4]} {axis_mac0/rx_payload_len[5]} {axis_mac0/rx_payload_len[6]} {axis_mac0/rx_payload_len[7]} {axis_mac0/rx_payload_len[8]} {axis_mac0/rx_payload_len[9]} {axis_mac0/rx_payload_len[10]} {axis_mac0/rx_payload_len[11]} {axis_mac0/rx_payload_len[12]} {axis_mac0/rx_payload_len[13]} {axis_mac0/rx_payload_len[14]} {axis_mac0/rx_payload_len[15]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe4]
-set_property port_width 8 [get_debug_ports u_ila_1/probe4]
-connect_debug_port u_ila_1/probe4 [get_nets [list {m_axis_rx_tdata[0]} {m_axis_rx_tdata[1]} {m_axis_rx_tdata[2]} {m_axis_rx_tdata[3]} {m_axis_rx_tdata[4]} {m_axis_rx_tdata[5]} {m_axis_rx_tdata[6]} {m_axis_rx_tdata[7]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe5]
-set_property port_width 3 [get_debug_ports u_ila_1/probe5]
-connect_debug_port u_ila_1/probe5 [get_nets [list {udp_ctrl_inst/eth_state[0]} {udp_ctrl_inst/eth_state[1]} {udp_ctrl_inst/eth_state[2]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe6]
-set_property port_width 1 [get_debug_ports u_ila_1/probe6]
-connect_debug_port u_ila_1/probe6 [get_nets [list axis_mac0/arp_found]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe7]
-set_property port_width 1 [get_debug_ports u_ila_1/probe7]
-connect_debug_port u_ila_1/probe7 [get_nets [list udp_ctrl_inst/axis_hs]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe8]
-set_property port_width 1 [get_debug_ports u_ila_1/probe8]
-connect_debug_port u_ila_1/probe8 [get_nets [list udp_ctrl_inst/busy_flag_eth]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe9]
-set_property port_width 1 [get_debug_ports u_ila_1/probe9]
-connect_debug_port u_ila_1/probe9 [get_nets [list axis_mac0/m_axis_rx_tlast]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe10]
-set_property port_width 1 [get_debug_ports u_ila_1/probe10]
-connect_debug_port u_ila_1/probe10 [get_nets [list m_axis_rx_tlast]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe11]
-set_property port_width 1 [get_debug_ports u_ila_1/probe11]
-connect_debug_port u_ila_1/probe11 [get_nets [list axis_mac0/m_axis_rx_tready]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe12]
-set_property port_width 1 [get_debug_ports u_ila_1/probe12]
-connect_debug_port u_ila_1/probe12 [get_nets [list m_axis_rx_tready]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe13]
-set_property port_width 1 [get_debug_ports u_ila_1/probe13]
-connect_debug_port u_ila_1/probe13 [get_nets [list axis_mac0/req_ready]]
-create_debug_core u_ila_2 ila
-set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_2]
-set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_2]
-set_property C_ADV_TRIGGER false [get_debug_cores u_ila_2]
-set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_2]
-set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_2]
-set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_2]
-set_property C_TRIGIN_EN false [get_debug_cores u_ila_2]
-set_property C_TRIGOUT_EN false [get_debug_cores u_ila_2]
-set_property port_width 1 [get_debug_ports u_ila_2/clk]
-connect_debug_port u_ila_2/clk [get_nets [list clk_wiz_ctrl_inst/inst/clk_out1]]
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe0]
-set_property port_width 12 [get_debug_ports u_ila_2/probe0]
-connect_debug_port u_ila_2/probe0 [get_nets [list {dac_pulse_height_dbg[0]} {dac_pulse_height_dbg[1]} {dac_pulse_height_dbg[2]} {dac_pulse_height_dbg[3]} {dac_pulse_height_dbg[4]} {dac_pulse_height_dbg[5]} {dac_pulse_height_dbg[6]} {dac_pulse_height_dbg[7]} {dac_pulse_height_dbg[8]} {dac_pulse_height_dbg[9]} {dac_pulse_height_dbg[10]} {dac_pulse_height_dbg[11]}]]
-create_debug_port u_ila_2 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe1]
-set_property port_width 16 [get_debug_ports u_ila_2/probe1]
-connect_debug_port u_ila_2/probe1 [get_nets [list {dac_pulse_num_dbg[0]} {dac_pulse_num_dbg[1]} {dac_pulse_num_dbg[2]} {dac_pulse_num_dbg[3]} {dac_pulse_num_dbg[4]} {dac_pulse_num_dbg[5]} {dac_pulse_num_dbg[6]} {dac_pulse_num_dbg[7]} {dac_pulse_num_dbg[8]} {dac_pulse_num_dbg[9]} {dac_pulse_num_dbg[10]} {dac_pulse_num_dbg[11]} {dac_pulse_num_dbg[12]} {dac_pulse_num_dbg[13]} {dac_pulse_num_dbg[14]} {dac_pulse_num_dbg[15]}]]
-create_debug_port u_ila_2 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe2]
-set_property port_width 32 [get_debug_ports u_ila_2/probe2]
-connect_debug_port u_ila_2/probe2 [get_nets [list {dac_pulse_period_dbg[0]} {dac_pulse_period_dbg[1]} {dac_pulse_period_dbg[2]} {dac_pulse_period_dbg[3]} {dac_pulse_period_dbg[4]} {dac_pulse_period_dbg[5]} {dac_pulse_period_dbg[6]} {dac_pulse_period_dbg[7]} {dac_pulse_period_dbg[8]} {dac_pulse_period_dbg[9]} {dac_pulse_period_dbg[10]} {dac_pulse_period_dbg[11]} {dac_pulse_period_dbg[12]} {dac_pulse_period_dbg[13]} {dac_pulse_period_dbg[14]} {dac_pulse_period_dbg[15]} {dac_pulse_period_dbg[16]} {dac_pulse_period_dbg[17]} {dac_pulse_period_dbg[18]} {dac_pulse_period_dbg[19]} {dac_pulse_period_dbg[20]} {dac_pulse_period_dbg[21]} {dac_pulse_period_dbg[22]} {dac_pulse_period_dbg[23]} {dac_pulse_period_dbg[24]} {dac_pulse_period_dbg[25]} {dac_pulse_period_dbg[26]} {dac_pulse_period_dbg[27]} {dac_pulse_period_dbg[28]} {dac_pulse_period_dbg[29]} {dac_pulse_period_dbg[30]} {dac_pulse_period_dbg[31]}]]
-create_debug_port u_ila_2 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe3]
-set_property port_width 32 [get_debug_ports u_ila_2/probe3]
-connect_debug_port u_ila_2/probe3 [get_nets [list {dac_pulse_width_dbg[0]} {dac_pulse_width_dbg[1]} {dac_pulse_width_dbg[2]} {dac_pulse_width_dbg[3]} {dac_pulse_width_dbg[4]} {dac_pulse_width_dbg[5]} {dac_pulse_width_dbg[6]} {dac_pulse_width_dbg[7]} {dac_pulse_width_dbg[8]} {dac_pulse_width_dbg[9]} {dac_pulse_width_dbg[10]} {dac_pulse_width_dbg[11]} {dac_pulse_width_dbg[12]} {dac_pulse_width_dbg[13]} {dac_pulse_width_dbg[14]} {dac_pulse_width_dbg[15]} {dac_pulse_width_dbg[16]} {dac_pulse_width_dbg[17]} {dac_pulse_width_dbg[18]} {dac_pulse_width_dbg[19]} {dac_pulse_width_dbg[20]} {dac_pulse_width_dbg[21]} {dac_pulse_width_dbg[22]} {dac_pulse_width_dbg[23]} {dac_pulse_width_dbg[24]} {dac_pulse_width_dbg[25]} {dac_pulse_width_dbg[26]} {dac_pulse_width_dbg[27]} {dac_pulse_width_dbg[28]} {dac_pulse_width_dbg[29]} {dac_pulse_width_dbg[30]} {dac_pulse_width_dbg[31]}]]
-create_debug_port u_ila_2 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe4]
-set_property port_width 1 [get_debug_ports u_ila_2/probe4]
-connect_debug_port u_ila_2/probe4 [get_nets [list dac_rst_dbg]]
-create_debug_port u_ila_2 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe5]
-set_property port_width 1 [get_debug_ports u_ila_2/probe5]
-connect_debug_port u_ila_2/probe5 [get_nets [list dac_start_dbg]]
-set_property C_CLK_INPUT_FREQ_HZ 300000000 [get_debug_cores dbg_hub]
-set_property C_ENABLE_CLK_DIVIDER false [get_debug_cores dbg_hub]
-set_property C_USER_SCAN_CHAIN 1 [get_debug_cores dbg_hub]
-connect_debug_port dbg_hub/clk [get_nets dac_clk]

designs/eth_ctrl_debug/eth_ctrl_debug.sv

@@ -1,298 +0,0 @@
-`timescale 1 ns / 1 ns
-
-module eth_ctrl_debug_top #(
-    parameter int unsigned DAC_DATA_WIDTH = 12
-)(
-    input               sys_clk_p,
-    input               sys_clk_n,
-    input               rst_n,
-
-    output [3:0]        led,
-
-    output              e_reset,
-    output              e_mdc,
-    inout               e_mdio,
-
-    output [3:0]        rgmii_txd,
-    output              rgmii_txctl,
-    output              rgmii_txc,
-    input  [3:0]        rgmii_rxd,
-    input               rgmii_rxctl,
-    input               rgmii_rxc
-);
-
-    // -------------------------------------------------------------------------
-    // Internal GMII-side signals
-    // -------------------------------------------------------------------------
-    wire  [7:0] gmii_txd;
-    wire        gmii_tx_en;
-    wire        gmii_tx_er;
-    wire        gmii_tx_clk;
-    wire        gmii_crs;
-    wire        gmii_col;
-    wire  [7:0] gmii_rxd_i;
-    wire        gmii_rx_dv;
-    wire        gmii_rx_er;
-    wire        gmii_rx_clk;
-
-    wire [31:0] pack_total_len;
-
-    wire        e_rx_dv;
-    wire [7:0]  e_rxd;
-    wire        e_tx_en;
-    wire [7:0]  e_txd;
-    wire        e_rst_n;
-    wire        sys_clk;
-
-    wire        duplex_mode;
-
-    assign duplex_mode = 1'b1;
-
-    // -------------------------------------------------------------------------
-    // System clock buffer (200 MHz differential input)
-    // -------------------------------------------------------------------------
-    IBUFDS sys_clk_ibufgds (
-        .O  (sys_clk),
-        .I  (sys_clk_p),
-        .IB (sys_clk_n)
-    );
-
-    // -------------------------------------------------------------------------
-    // IDELAYCTRL
-    // -------------------------------------------------------------------------
-    (* IODELAY_GROUP = "rgmii_idelay_group" *)
-    IDELAYCTRL IDELAYCTRL_inst (
-        .RDY    (),
-        .REFCLK (sys_clk),
-        .RST    (1'b0)
-    );
-
-    // -------------------------------------------------------------------------
-    // Generated clocks for controller
-    // Need to create this IP in Vivado:
-    //  input : 200 MHz
-    //  output0: 130 MHz
-    //  output1: 65 MHz
-    // -------------------------------------------------------------------------
-    wire dac_clk;
-    wire adc_clk;
-    wire clk_wiz_locked;
-
-    clk_wiz_ctrl_inst clk_wiz_ctrl_inst (
-        .clk_in1   (sys_clk),
-        .reset    (~rst_n),
-        .clk_out1  (dac_clk),   // 130 MHz
-        .clk_out2  (adc_clk),   // 65 MHz
-        .locked    (clk_wiz_locked)
-    );
-
-    // -------------------------------------------------------------------------
-    // GMII <-> RGMII conversion
-    // -------------------------------------------------------------------------
-    util_gmii_to_rgmii util_gmii_to_rgmii_m0 (
-        .reset           (1'b0),
-        .rgmii_td        (rgmii_txd),
-        .rgmii_tx_ctl    (rgmii_txctl),
-        .rgmii_txc       (rgmii_txc),
-        .rgmii_rd        (rgmii_rxd),
-        .rgmii_rx_ctl    (rgmii_rxctl),
-        .gmii_rx_clk     (gmii_rx_clk),
-        .gmii_txd        (e_txd),
-        .gmii_tx_en      (e_tx_en),
-        .gmii_tx_er      (1'b0),
-        .gmii_tx_clk     (gmii_tx_clk),
-        .gmii_crs        (gmii_crs),
-        .gmii_col        (gmii_col),
-        .gmii_rxd        (gmii_rxd_i),
-        .rgmii_rxc       (rgmii_rxc),
-        .gmii_rx_dv      (gmii_rx_dv),
-        .gmii_rx_er      (gmii_rx_er),
-        .speed_selection (2'b10),
-        .duplex_mode     (duplex_mode)
-    );
-
-    // -------------------------------------------------------------------------
-    // GMII arbitration / adaptation
-    // -------------------------------------------------------------------------
-    gmii_arbi arbi_inst (
-        .clk            (gmii_tx_clk),
-        .rst_n          (rst_n),
-        .speed          (2'b10),
-        .link           (1'b1),
-        .pack_total_len (pack_total_len),
-        .e_rst_n        (e_rst_n),
-        .gmii_rx_dv     (gmii_rx_dv),
-        .gmii_rxd       (gmii_rxd_i),
-        .gmii_tx_en     (gmii_tx_en),
-        .gmii_txd       (gmii_txd),
-        .e_rx_dv        (e_rx_dv),
-        .e_rxd          (e_rxd),
-        .e_tx_en        (e_tx_en),
-        .e_txd          (e_txd)
-    );
-
-    // -------------------------------------------------------------------------
-    // axis_mac interface
-    // RX stream from Ethernet goes into controller
-    // TX stream is unused for now
-    // -------------------------------------------------------------------------
-    wire        req_ready;
-
-    reg         send_req;
-    reg  [15:0] data_length;
-
-    reg  [7:0]  s_axis_tx_tdata;
-    reg         s_axis_tx_tvalid;
-    wire        s_axis_tx_tready;
-    reg         s_axis_tx_tlast;
-
-    (* MARK_DEBUG="true" *) wire [7:0]  m_axis_rx_tdata;
-    (* MARK_DEBUG="true" *) wire        m_axis_rx_tvalid;
-    (* MARK_DEBUG="true" *) wire        m_axis_rx_tlast;
-    (* MARK_DEBUG="true" *) wire        m_axis_rx_tready;
-
-    // Always ready to accept RX payload bytes
-    assign m_axis_rx_tready = 1'b1;
-
-    // TX disabled
-    always @(*) begin
-        send_req        = 1'b0;
-        data_length     = 16'd0;
-        s_axis_tx_tdata = 8'd0;
-        s_axis_tx_tvalid= 1'b0;
-        s_axis_tx_tlast = 1'b0;
-    end
-
-    axis_mac axis_mac0 (
-        .gmii_tx_clk       (gmii_tx_clk),
-        .gmii_rx_clk       (gmii_rx_clk),
-        .rst_n             (e_rst_n),
-
-        .gmii_rx_dv        (e_rx_dv),
-        .gmii_rxd          (e_rxd),
-        .gmii_tx_en        (gmii_tx_en),
-        .gmii_txd          (gmii_txd),
-
-        .send_req          (send_req),
-        .data_length       (data_length),
-        .req_ready         (req_ready),
-
-        .s_axis_tx_tdata   (s_axis_tx_tdata),
-        .s_axis_tx_tvalid  (s_axis_tx_tvalid),
-        .s_axis_tx_tready  (s_axis_tx_tready),
-        .s_axis_tx_tlast   (s_axis_tx_tlast),
-
-        .m_axis_rx_tdata   (m_axis_rx_tdata),
-        .m_axis_rx_tvalid  (m_axis_rx_tvalid),
-        .m_axis_rx_tready  (m_axis_rx_tready),
-        .m_axis_rx_tlast   (m_axis_rx_tlast)
-    );
-
-    // PHY reset helper from your original example
-    reset reset_m0 (
-        .clk   (sys_clk),
-        .key1  (rst_n),
-        .rst_n (e_reset)
-    );
-
-    // MDIO lines are not driven here yet
-    assign e_mdc  = 1'b0;
-    assign e_mdio = 1'bz;
-
-    // -------------------------------------------------------------------------
-    // Controller reset
-    // Use both external reset and clk_wiz lock
-    // -------------------------------------------------------------------------
-    wire ctrl_rst_n = rst_n & clk_wiz_locked;
-
-    // -------------------------------------------------------------------------
-    // Debug finish generator
-    //
-    // After each adc_start pulse generates one finish pulse after some delay.
-    // This is just for first bring-up so the controller can leave busy state
-    // If you don't want this, replace with:
-    // wire finish_dbg = 1'b0;
-    // -------------------------------------------------------------------------
-    (* MARK_DEBUG="true" *) logic        finish_dbg;
-    (* MARK_DEBUG="true" *) logic [7:0]  finish_cnt;
-    (* MARK_DEBUG="true" *) logic        finish_pending;
-
-    // Controller outputs to debug
-    (* MARK_DEBUG="true" *) wire [31:0]               dac_pulse_width_dbg;
-    (* MARK_DEBUG="true" *) wire [31:0]               dac_pulse_period_dbg;
-    (* MARK_DEBUG="true" *) wire [DAC_DATA_WIDTH-1:0] dac_pulse_height_dbg;
-    (* MARK_DEBUG="true" *) wire [15:0]               dac_pulse_num_dbg;
-
-    (* MARK_DEBUG="true" *) wire [31:0]               adc_pulse_period_dbg;
-    (* MARK_DEBUG="true" *) wire [15:0]               adc_pulse_num_dbg;
-
-    (* MARK_DEBUG="true" *) wire                      dac_start_dbg;
-    (* MARK_DEBUG="true" *) wire                      adc_start_dbg;
-    (* MARK_DEBUG="true" *) wire                      dac_rst_dbg;
-    (* MARK_DEBUG="true" *) wire                      adc_rst_dbg;
-
-    always_ff @(posedge adc_clk or negedge ctrl_rst_n) begin
-        if (!ctrl_rst_n) begin
-            finish_dbg     <= 1'b0;
-            finish_cnt     <= 8'd0;
-            finish_pending <= 1'b0;
-        end else begin
-            finish_dbg <= 1'b0;
-
-            if (adc_start_dbg) begin
-                finish_pending <= 1'b1;
-                finish_cnt     <= 8'd80;
-            end else if (finish_pending) begin
-                if (finish_cnt == 8'd0) begin
-                    finish_dbg     <= 1'b1;
-                    finish_pending <= 1'b0;
-                end else begin
-                    finish_cnt <= finish_cnt - 8'd1;
-                end
-            end
-        end
-    end
-
-    // -------------------------------------------------------------------------
-    // Controller
-    // ETH domain = gmii_rx_clk, because RX AXI master comes from axis_mac RX side
-    // -------------------------------------------------------------------------
-    control #(
-        .DAC_DATA_WIDTH(DAC_DATA_WIDTH)
-    ) udp_ctrl_inst (
-        .eth_clk_in        (gmii_rx_clk),
-        .dac_clk_in        (dac_clk),
-        .adc_clk_in        (adc_clk),
-        .rst_n             (ctrl_rst_n),
-
-        .s_axis_tdata      (m_axis_rx_tdata),
-        .s_axis_tvalid     (m_axis_rx_tvalid),
-        .s_axis_tready     (), // controller internally always ready in current version
-        .s_axis_tlast      (m_axis_rx_tlast),
-
-        .finish            (finish_dbg),
-
-        .dac_pulse_width   (dac_pulse_width_dbg),
-        .dac_pulse_period  (dac_pulse_period_dbg),
-        .dac_pulse_height  (dac_pulse_height_dbg),
-        .dac_pulse_num     (dac_pulse_num_dbg),
-
-        .adc_pulse_period  (adc_pulse_period_dbg),
-        .adc_pulse_num     (adc_pulse_num_dbg),
-
-        .dac_start         (dac_start_dbg),
-        .adc_start         (adc_start_dbg),
-
-        .dac_rst           (dac_rst_dbg),
-        .adc_rst           (adc_rst_dbg)
-    );
-
-    // -------------------------------------------------------------------------
-    // Simple LED status
-    // -------------------------------------------------------------------------
-    assign led[0] = clk_wiz_locked;
-    assign led[1] = m_axis_rx_tvalid;
-    assign led[2] = dac_start_dbg;
-    assign led[3] = adc_rst_dbg;
-
-endmodule

designs/eth_ctrl_debug/ip/clk_wiz_ctrl_inst.xci

@@ -1,689 +0,0 @@
-{
-  "schema": "xilinx.com:schema:json_instance:1.0",
-  "ip_inst": {
-    "xci_name": "clk_wiz_ctrl_inst",
-    "component_reference": "xilinx.com:ip:clk_wiz:6.0",
-    "ip_revision": "16",
-    "gen_directory": "../../../../eth_ctrl_debug_top.gen/sources_1/ip/clk_wiz_ctrl_inst",
-    "parameters": {
-      "component_parameters": {
-        "Component_Name": [ { "value": "clk_wiz_ctrl_inst", "resolve_type": "user", "usage": "all" } ],
-        "USER_CLK_FREQ0": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "USER_CLK_FREQ1": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "USER_CLK_FREQ2": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "USER_CLK_FREQ3": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "ENABLE_CLOCK_MONITOR": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "OPTIMIZE_CLOCKING_STRUCTURE_EN": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "ENABLE_USER_CLOCK0": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "ENABLE_USER_CLOCK1": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "ENABLE_USER_CLOCK2": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "ENABLE_USER_CLOCK3": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "Enable_PLL0": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "Enable_PLL1": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "REF_CLK_FREQ": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PRECISION": [ { "value": "1", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PRIMITIVE": [ { "value": "MMCM", "resolve_type": "user", "usage": "all" } ],
-        "PRIMTYPE_SEL": [ { "value": "mmcm_adv", "resolve_type": "user", "usage": "all" } ],
-        "CLOCK_MGR_TYPE": [ { "value": "auto", "resolve_type": "user", "usage": "all" } ],
-        "USE_FREQ_SYNTH": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_SPREAD_SPECTRUM": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_PHASE_ALIGNMENT": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_MIN_POWER": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_DYN_PHASE_SHIFT": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_DYN_RECONFIG": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "JITTER_SEL": [ { "value": "No_Jitter", "resolve_type": "user", "usage": "all" } ],
-        "PRIM_IN_FREQ": [ { "value": "200.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PRIM_IN_TIMEPERIOD": [ { "value": "10.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "IN_FREQ_UNITS": [ { "value": "Units_MHz", "resolve_type": "user", "usage": "all" } ],
-        "PHASESHIFT_MODE": [ { "value": "WAVEFORM", "resolve_type": "user", "usage": "all" } ],
-        "IN_JITTER_UNITS": [ { "value": "Units_UI", "resolve_type": "user", "usage": "all" } ],
-        "RELATIVE_INCLK": [ { "value": "REL_PRIMARY", "resolve_type": "user", "usage": "all" } ],
-        "USE_INCLK_SWITCHOVER": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "SECONDARY_IN_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "SECONDARY_IN_TIMEPERIOD": [ { "value": "10.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "SECONDARY_PORT": [ { "value": "clk_in2", "resolve_type": "user", "usage": "all" } ],
-        "SECONDARY_SOURCE": [ { "value": "Single_ended_clock_capable_pin", "resolve_type": "user", "usage": "all" } ],
-        "JITTER_OPTIONS": [ { "value": "UI", "resolve_type": "user", "usage": "all" } ],
-        "CLKIN1_UI_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKIN2_UI_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PRIM_IN_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "SECONDARY_IN_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKIN1_JITTER_PS": [ { "value": "50.0", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKIN2_JITTER_PS": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT1_USED": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT2_USED": [ { "value": "true", "value_src": "user", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT3_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT4_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT5_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT6_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT7_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "NUM_OUT_CLKS": [ { "value": "2", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "CLK_OUT1_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLK_OUT2_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLK_OUT3_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLK_OUT4_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLK_OUT5_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLK_OUT6_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLK_OUT7_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "PRIMARY_PORT": [ { "value": "clk_in1", "resolve_type": "user", "usage": "all" } ],
-        "CLK_OUT1_PORT": [ { "value": "clk_out1", "resolve_type": "user", "usage": "all" } ],
-        "CLK_OUT2_PORT": [ { "value": "clk_out2", "resolve_type": "user", "usage": "all" } ],
-        "CLK_OUT3_PORT": [ { "value": "clk_out3", "resolve_type": "user", "usage": "all" } ],
-        "CLK_OUT4_PORT": [ { "value": "clk_out4", "resolve_type": "user", "usage": "all" } ],
-        "CLK_OUT5_PORT": [ { "value": "clk_out5", "resolve_type": "user", "usage": "all" } ],
-        "CLK_OUT6_PORT": [ { "value": "clk_out6", "resolve_type": "user", "usage": "all" } ],
-        "CLK_OUT7_PORT": [ { "value": "clk_out7", "resolve_type": "user", "usage": "all" } ],
-        "DADDR_PORT": [ { "value": "daddr", "resolve_type": "user", "usage": "all" } ],
-        "DCLK_PORT": [ { "value": "dclk", "resolve_type": "user", "usage": "all" } ],
-        "DRDY_PORT": [ { "value": "drdy", "resolve_type": "user", "usage": "all" } ],
-        "DWE_PORT": [ { "value": "dwe", "resolve_type": "user", "usage": "all" } ],
-        "DIN_PORT": [ { "value": "din", "resolve_type": "user", "usage": "all" } ],
-        "DOUT_PORT": [ { "value": "dout", "resolve_type": "user", "usage": "all" } ],
-        "DEN_PORT": [ { "value": "den", "resolve_type": "user", "usage": "all" } ],
-        "PSCLK_PORT": [ { "value": "psclk", "resolve_type": "user", "usage": "all" } ],
-        "PSEN_PORT": [ { "value": "psen", "resolve_type": "user", "usage": "all" } ],
-        "PSINCDEC_PORT": [ { "value": "psincdec", "resolve_type": "user", "usage": "all" } ],
-        "PSDONE_PORT": [ { "value": "psdone", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT1_REQUESTED_OUT_FREQ": [ { "value": "130.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT1_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT1_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT2_REQUESTED_OUT_FREQ": [ { "value": "65.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT2_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT2_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT3_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT3_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT3_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT4_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT4_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT4_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT5_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT5_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT5_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT6_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT6_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT6_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT7_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT7_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT7_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "USE_MAX_I_JITTER": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_MIN_O_JITTER": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT1_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT2_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT3_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT4_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT5_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT6_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT7_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "PRIM_SOURCE": [ { "value": "Single_ended_clock_capable_pin", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT1_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT2_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT3_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT4_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT5_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT6_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT7_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
-        "FEEDBACK_SOURCE": [ { "value": "FDBK_AUTO", "resolve_type": "user", "usage": "all" } ],
-        "CLKFB_IN_SIGNALING": [ { "value": "SINGLE", "resolve_type": "user", "usage": "all" } ],
-        "CLKFB_IN_PORT": [ { "value": "clkfb_in", "resolve_type": "user", "usage": "all" } ],
-        "CLKFB_IN_P_PORT": [ { "value": "clkfb_in_p", "resolve_type": "user", "usage": "all" } ],
-        "CLKFB_IN_N_PORT": [ { "value": "clkfb_in_n", "resolve_type": "user", "usage": "all" } ],
-        "CLKFB_OUT_PORT": [ { "value": "clkfb_out", "resolve_type": "user", "usage": "all" } ],
-        "CLKFB_OUT_P_PORT": [ { "value": "clkfb_out_p", "resolve_type": "user", "usage": "all" } ],
-        "CLKFB_OUT_N_PORT": [ { "value": "clkfb_out_n", "resolve_type": "user", "usage": "all" } ],
-        "PLATFORM": [ { "value": "UNKNOWN", "resolve_type": "user", "usage": "all" } ],
-        "SUMMARY_STRINGS": [ { "value": "empty", "resolve_type": "user", "usage": "all" } ],
-        "USE_LOCKED": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CALC_DONE": [ { "value": "empty", "resolve_type": "user", "usage": "all" } ],
-        "USE_RESET": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_POWER_DOWN": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_STATUS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_FREEZE": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_CLK_VALID": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_INCLK_STOPPED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_CLKFB_STOPPED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "RESET_PORT": [ { "value": "reset", "resolve_type": "user", "usage": "all" } ],
-        "LOCKED_PORT": [ { "value": "locked", "resolve_type": "user", "usage": "all" } ],
-        "POWER_DOWN_PORT": [ { "value": "power_down", "resolve_type": "user", "usage": "all" } ],
-        "CLK_VALID_PORT": [ { "value": "CLK_VALID", "resolve_type": "user", "usage": "all" } ],
-        "STATUS_PORT": [ { "value": "STATUS", "resolve_type": "user", "usage": "all" } ],
-        "CLK_IN_SEL_PORT": [ { "value": "clk_in_sel", "resolve_type": "user", "usage": "all" } ],
-        "INPUT_CLK_STOPPED_PORT": [ { "value": "input_clk_stopped", "resolve_type": "user", "usage": "all" } ],
-        "CLKFB_STOPPED_PORT": [ { "value": "clkfb_stopped", "resolve_type": "user", "usage": "all" } ],
-        "SS_MODE": [ { "value": "CENTER_HIGH", "resolve_type": "user", "usage": "all" } ],
-        "SS_MOD_FREQ": [ { "value": "250", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "SS_MOD_TIME": [ { "value": "0.004", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "OVERRIDE_MMCM": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_NOTES": [ { "value": "None", "resolve_type": "user", "usage": "all" } ],
-        "MMCM_DIVCLK_DIVIDE": [ { "value": "1", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "MMCM_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "user", "usage": "all" } ],
-        "MMCM_CLKFBOUT_MULT_F": [ { "value": "4.875", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKFBOUT_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKIN1_PERIOD": [ { "value": "5.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKIN2_PERIOD": [ { "value": "10.0", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT4_CASCADE": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLOCK_HOLD": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_COMPENSATION": [ { "value": "ZHOLD", "resolve_type": "user", "usage": "all" } ],
-        "MMCM_REF_JITTER1": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_REF_JITTER2": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_STARTUP_WAIT": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT0_DIVIDE_F": [ { "value": "7.500", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT0_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT0_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT1_DIVIDE": [ { "value": "15", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "MMCM_CLKOUT1_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT1_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "MMCM_CLKOUT2_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT2_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "MMCM_CLKOUT3_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT3_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "MMCM_CLKOUT4_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT4_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT5_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "MMCM_CLKOUT5_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT5_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT6_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "MMCM_CLKOUT6_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT6_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT6_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "OVERRIDE_PLL": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "PLL_NOTES": [ { "value": "None", "resolve_type": "user", "usage": "all" } ],
-        "PLL_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "user", "usage": "all" } ],
-        "PLL_CLKFBOUT_MULT": [ { "value": "4", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "PLL_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLK_FEEDBACK": [ { "value": "CLKFBOUT", "resolve_type": "user", "usage": "all" } ],
-        "PLL_DIVCLK_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "PLL_CLKIN_PERIOD": [ { "value": "10.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_COMPENSATION": [ { "value": "SYSTEM_SYNCHRONOUS", "resolve_type": "user", "usage": "all" } ],
-        "PLL_REF_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT0_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "PLL_CLKOUT0_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT1_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "PLL_CLKOUT1_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "PLL_CLKOUT2_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "PLL_CLKOUT3_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "PLL_CLKOUT4_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT5_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "PLL_CLKOUT5_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "RESET_TYPE": [ { "value": "ACTIVE_HIGH", "resolve_type": "user", "usage": "all" } ],
-        "USE_SAFE_CLOCK_STARTUP": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_CLOCK_SEQUENCING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT1_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "CLKOUT2_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "CLKOUT3_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "CLKOUT4_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "CLKOUT5_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "CLKOUT6_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "CLKOUT7_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "USE_BOARD_FLOW": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLK_IN1_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
-        "CLK_IN2_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
-        "DIFF_CLK_IN1_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
-        "DIFF_CLK_IN2_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
-        "AUTO_PRIMITIVE": [ { "value": "MMCM", "resolve_type": "user", "usage": "all" } ],
-        "RESET_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
-        "ENABLE_CDDC": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CDDCDONE_PORT": [ { "value": "cddcdone", "resolve_type": "user", "usage": "all" } ],
-        "CDDCREQ_PORT": [ { "value": "cddcreq", "resolve_type": "user", "usage": "all" } ],
-        "ENABLE_CLKOUTPHY": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUTPHY_REQUESTED_FREQ": [ { "value": "600.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT1_JITTER": [ { "value": "102.676", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT1_PHASE_ERROR": [ { "value": "87.159", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT2_JITTER": [ { "value": "117.878", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT2_PHASE_ERROR": [ { "value": "87.159", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT3_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT3_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT4_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT4_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT5_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT5_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT6_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT6_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT7_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT7_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "INPUT_MODE": [ { "value": "frequency", "resolve_type": "user", "usage": "all" } ],
-        "INTERFACE_SELECTION": [ { "value": "Enable_AXI", "resolve_type": "user", "usage": "all" } ],
-        "AXI_DRP": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "PHASE_DUTY_CONFIG": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ]
-      },
-      "model_parameters": {
-        "C_CLKOUT2_USED": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USER_CLK_FREQ0": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_AUTO_PRIMITIVE": [ { "value": "MMCM", "resolve_type": "generated", "usage": "all" } ],
-        "C_USER_CLK_FREQ1": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_USER_CLK_FREQ2": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_USER_CLK_FREQ3": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_ENABLE_CLOCK_MONITOR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_ENABLE_USER_CLOCK0": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_ENABLE_USER_CLOCK1": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_ENABLE_USER_CLOCK2": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_ENABLE_USER_CLOCK3": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_Enable_PLL0": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_Enable_PLL1": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_REF_CLK_FREQ": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PRECISION": [ { "value": "1", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT3_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT4_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT5_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT6_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT7_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_CLKOUT1_BAR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_CLKOUT2_BAR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_CLKOUT3_BAR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_CLKOUT4_BAR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "c_component_name": [ { "value": "clk_wiz_ctrl_inst", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLATFORM": [ { "value": "UNKNOWN", "resolve_type": "generated", "usage": "all" } ],
-        "C_USE_FREQ_SYNTH": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_PHASE_ALIGNMENT": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PRIM_IN_JITTER": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_SECONDARY_IN_JITTER": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_JITTER_SEL": [ { "value": "No_Jitter", "resolve_type": "generated", "usage": "all" } ],
-        "C_USE_MIN_POWER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_MIN_O_JITTER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_MAX_I_JITTER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_DYN_PHASE_SHIFT": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_OPTIMIZE_CLOCKING_STRUCTURE_EN": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_INCLK_SWITCHOVER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_DYN_RECONFIG": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_SPREAD_SPECTRUM": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_FAST_SIMULATION": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PRIMTYPE_SEL": [ { "value": "AUTO", "resolve_type": "generated", "usage": "all" } ],
-        "C_USE_CLK_VALID": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PRIM_IN_FREQ": [ { "value": "200.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PRIM_IN_TIMEPERIOD": [ { "value": "10.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_IN_FREQ_UNITS": [ { "value": "Units_MHz", "resolve_type": "generated", "usage": "all" } ],
-        "C_SECONDARY_IN_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_SECONDARY_IN_TIMEPERIOD": [ { "value": "10.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_FEEDBACK_SOURCE": [ { "value": "FDBK_AUTO", "resolve_type": "generated", "usage": "all" } ],
-        "C_PRIM_SOURCE": [ { "value": "Single_ended_clock_capable_pin", "resolve_type": "generated", "usage": "all" } ],
-        "C_PHASESHIFT_MODE": [ { "value": "WAVEFORM", "resolve_type": "generated", "usage": "all" } ],
-        "C_SECONDARY_SOURCE": [ { "value": "Single_ended_clock_capable_pin", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFB_IN_SIGNALING": [ { "value": "SINGLE", "resolve_type": "generated", "usage": "all" } ],
-        "C_USE_RESET": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_RESET_LOW": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_LOCKED": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_INCLK_STOPPED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_CLKFB_STOPPED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_POWER_DOWN": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_STATUS": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_FREEZE": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_NUM_OUT_CLKS": [ { "value": "2", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT1_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT2_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT3_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT4_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT5_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT6_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT7_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
-        "C_INCLK_SUM_ROW0": [ { "value": "Input Clock   Freq (MHz)    Input Jitter (UI)", "resolve_type": "generated", "usage": "all" } ],
-        "C_INCLK_SUM_ROW1": [ { "value": "__primary_________200.000____________0.010", "resolve_type": "generated", "usage": "all" } ],
-        "C_INCLK_SUM_ROW2": [ { "value": "no_secondary_input_clock ", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW0A": [ { "value": " Output     Output      Phase    Duty Cycle   Pk-to-Pk     Phase", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW0B": [ { "value": "  Clock     Freq (MHz)  (degrees)    (%)     Jitter (ps)  Error (ps)", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW1": [ { "value": "clk_out1__130.00000______0.000______50.0______102.676_____87.159", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW2": [ { "value": "clk_out2__65.00000______0.000______50.0______117.878_____87.159", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW3": [ { "value": "no_CLK_OUT3_output", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW4": [ { "value": "no_CLK_OUT4_output", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW5": [ { "value": "no_CLK_OUT5_output", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW6": [ { "value": "no_CLK_OUT6_output", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW7": [ { "value": "no_CLK_OUT7_output", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT1_REQUESTED_OUT_FREQ": [ { "value": "130.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT2_REQUESTED_OUT_FREQ": [ { "value": "65.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT3_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT4_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT5_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT6_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT7_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT1_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT2_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT3_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT4_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT5_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT6_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT7_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT1_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT2_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT3_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT4_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT5_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT6_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT7_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT1_OUT_FREQ": [ { "value": "130.00000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT2_OUT_FREQ": [ { "value": "65.00000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT3_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT4_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT5_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT6_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT7_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT6_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT7_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT1_DUTY_CYCLE": [ { "value": "50.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT2_DUTY_CYCLE": [ { "value": "50.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT3_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT4_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT5_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT6_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT7_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_USE_SAFE_CLOCK_STARTUP": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_CLOCK_SEQUENCING": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT1_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT2_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT3_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT4_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT5_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT6_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT7_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_MMCM_NOTES": [ { "value": "None", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKFBOUT_MULT_F": [ { "value": "4.875", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKIN1_PERIOD": [ { "value": "5.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKIN2_PERIOD": [ { "value": "10.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT4_CASCADE": [ { "value": "FALSE", "resolve_type": "generated", "format": "bool", "usage": "all" } ],
-        "C_MMCM_CLOCK_HOLD": [ { "value": "FALSE", "resolve_type": "generated", "format": "bool", "usage": "all" } ],
-        "C_MMCM_COMPENSATION": [ { "value": "ZHOLD", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_DIVCLK_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_MMCM_REF_JITTER1": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_REF_JITTER2": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_STARTUP_WAIT": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKOUT0_DIVIDE_F": [ { "value": "7.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT1_DIVIDE": [ { "value": "15", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_MMCM_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_MMCM_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_MMCM_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_MMCM_CLKOUT5_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_MMCM_CLKOUT6_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_MMCM_CLKOUT0_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT1_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT2_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT3_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT4_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT5_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT6_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT6_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKFBOUT_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKOUT0_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKOUT1_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKOUT2_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKOUT3_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKOUT4_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKOUT5_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKOUT6_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLL_NOTES": [ { "value": "No notes", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLL_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLL_CLK_FEEDBACK": [ { "value": "CLKFBOUT", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLL_CLKFBOUT_MULT": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PLL_CLKIN_PERIOD": [ { "value": "1.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_COMPENSATION": [ { "value": "SYSTEM_SYNCHRONOUS", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLL_DIVCLK_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PLL_REF_JITTER": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT0_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PLL_CLKOUT1_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PLL_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PLL_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PLL_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PLL_CLKOUT5_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PLL_CLKOUT0_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT1_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT2_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT3_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT4_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT5_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLOCK_MGR_TYPE": [ { "value": "NA", "resolve_type": "generated", "usage": "all" } ],
-        "C_OVERRIDE_MMCM": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_OVERRIDE_PLL": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PRIMARY_PORT": [ { "value": "clk_in1", "resolve_type": "generated", "usage": "all" } ],
-        "C_SECONDARY_PORT": [ { "value": "clk_in2", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_OUT1_PORT": [ { "value": "clk_out1", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_OUT2_PORT": [ { "value": "clk_out2", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_OUT3_PORT": [ { "value": "clk_out3", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_OUT4_PORT": [ { "value": "clk_out4", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_OUT5_PORT": [ { "value": "clk_out5", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_OUT6_PORT": [ { "value": "clk_out6", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_OUT7_PORT": [ { "value": "clk_out7", "resolve_type": "generated", "usage": "all" } ],
-        "C_RESET_PORT": [ { "value": "reset", "resolve_type": "generated", "usage": "all" } ],
-        "C_LOCKED_PORT": [ { "value": "locked", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFB_IN_PORT": [ { "value": "clkfb_in", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFB_IN_P_PORT": [ { "value": "clkfb_in_p", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFB_IN_N_PORT": [ { "value": "clkfb_in_n", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFB_OUT_PORT": [ { "value": "clkfb_out", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFB_OUT_P_PORT": [ { "value": "clkfb_out_p", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFB_OUT_N_PORT": [ { "value": "clkfb_out_n", "resolve_type": "generated", "usage": "all" } ],
-        "C_POWER_DOWN_PORT": [ { "value": "power_down", "resolve_type": "generated", "usage": "all" } ],
-        "C_DADDR_PORT": [ { "value": "daddr", "resolve_type": "generated", "usage": "all" } ],
-        "C_DCLK_PORT": [ { "value": "dclk", "resolve_type": "generated", "usage": "all" } ],
-        "C_DRDY_PORT": [ { "value": "drdy", "resolve_type": "generated", "usage": "all" } ],
-        "C_DWE_PORT": [ { "value": "dwe", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIN_PORT": [ { "value": "din", "resolve_type": "generated", "usage": "all" } ],
-        "C_DOUT_PORT": [ { "value": "dout", "resolve_type": "generated", "usage": "all" } ],
-        "C_DEN_PORT": [ { "value": "den", "resolve_type": "generated", "usage": "all" } ],
-        "C_PSCLK_PORT": [ { "value": "psclk", "resolve_type": "generated", "usage": "all" } ],
-        "C_PSEN_PORT": [ { "value": "psen", "resolve_type": "generated", "usage": "all" } ],
-        "C_PSINCDEC_PORT": [ { "value": "psincdec", "resolve_type": "generated", "usage": "all" } ],
-        "C_PSDONE_PORT": [ { "value": "psdone", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_VALID_PORT": [ { "value": "CLK_VALID", "resolve_type": "generated", "usage": "all" } ],
-        "C_STATUS_PORT": [ { "value": "STATUS", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_IN_SEL_PORT": [ { "value": "clk_in_sel", "resolve_type": "generated", "usage": "all" } ],
-        "C_INPUT_CLK_STOPPED_PORT": [ { "value": "input_clk_stopped", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFB_STOPPED_PORT": [ { "value": "clkfb_stopped", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKIN1_JITTER_PS": [ { "value": "50.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKIN2_JITTER_PS": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PRIMITIVE": [ { "value": "MMCM", "resolve_type": "generated", "usage": "all" } ],
-        "C_SS_MODE": [ { "value": "CENTER_HIGH", "resolve_type": "generated", "usage": "all" } ],
-        "C_SS_MOD_PERIOD": [ { "value": "4000", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_SS_MOD_TIME": [ { "value": "0.004", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_HAS_CDDC": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CDDCDONE_PORT": [ { "value": "cddcdone", "resolve_type": "generated", "usage": "all" } ],
-        "C_CDDCREQ_PORT": [ { "value": "cddcreq", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUTPHY_MODE": [ { "value": "VCO", "resolve_type": "generated", "usage": "all" } ],
-        "C_ENABLE_CLKOUTPHY": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_INTERFACE_SELECTION": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_S_AXI_ADDR_WIDTH": [ { "value": "11", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_S_AXI_DATA_WIDTH": [ { "value": "32", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_POWER_REG": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT0_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT0_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT1_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT1_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT2_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT2_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT3_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT3_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT4_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT4_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT5_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT5_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT6_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT6_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFBOUT_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFBOUT_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVCLK": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_LOCK_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_LOCK_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_LOCK_3": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_FILTER_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_FILTER_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE1_AUTO": [ { "value": "1", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE2_AUTO": [ { "value": "2.0", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE3_AUTO": [ { "value": "0.13333333333333333", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE4_AUTO": [ { "value": "0.13333333333333333", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE5_AUTO": [ { "value": "0.13333333333333333", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE6_AUTO": [ { "value": "0.13333333333333333", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE7_AUTO": [ { "value": "0.13333333333333333", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLLBUFGCEDIV": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCMBUFGCEDIV": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLLBUFGCEDIV1": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLLBUFGCEDIV2": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLLBUFGCEDIV3": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLLBUFGCEDIV4": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCMBUFGCEDIV1": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCMBUFGCEDIV2": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCMBUFGCEDIV3": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCMBUFGCEDIV4": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCMBUFGCEDIV5": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCMBUFGCEDIV6": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCMBUFGCEDIV7": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT1_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT2_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT3_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT4_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT5_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT6_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT7_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT0_ACTUAL_FREQ": [ { "value": "130.00000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT1_ACTUAL_FREQ": [ { "value": "65.00000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT2_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT3_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT4_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT5_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT6_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
-        "C_M_MAX": [ { "value": "64.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_M_MIN": [ { "value": "2.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_D_MAX": [ { "value": "80.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_D_MIN": [ { "value": "1.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_O_MAX": [ { "value": "128.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_O_MIN": [ { "value": "1.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_VCO_MIN": [ { "value": "600.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_VCO_MAX": [ { "value": "1200.000", "resolve_type": "generated", "format": "float", "usage": "all" } ]
-      },
-      "project_parameters": {
-        "ARCHITECTURE": [ { "value": "artix7" } ],
-        "BASE_BOARD_PART": [ { "value": "" } ],
-        "BOARD_CONNECTIONS": [ { "value": "" } ],
-        "DEVICE": [ { "value": "xc7a35t" } ],
-        "PACKAGE": [ { "value": "fgg484" } ],
-        "PREFHDL": [ { "value": "VERILOG" } ],
-        "SILICON_REVISION": [ { "value": "" } ],
-        "SIMULATOR_LANGUAGE": [ { "value": "MIXED" } ],
-        "SPEEDGRADE": [ { "value": "-1" } ],
-        "STATIC_POWER": [ { "value": "" } ],
-        "TEMPERATURE_GRADE": [ { "value": "" } ]
-      },
-      "runtime_parameters": {
-        "IPCONTEXT": [ { "value": "IP_Flow" } ],
-        "IPREVISION": [ { "value": "16" } ],
-        "MANAGED": [ { "value": "TRUE" } ],
-        "OUTPUTDIR": [ { "value": "../../../../eth_ctrl_debug_top.gen/sources_1/ip/clk_wiz_ctrl_inst" } ],
-        "SELECTEDSIMMODEL": [ { "value": "" } ],
-        "SHAREDDIR": [ { "value": "." } ],
-        "SWVERSION": [ { "value": "2025.1" } ],
-        "SYNTHESISFLOW": [ { "value": "OUT_OF_CONTEXT" } ]
-      }
-    },
-    "boundary": {
-      "ports": {
-        "reset": [ { "direction": "in", "driver_value": "0" } ],
-        "clk_in1": [ { "direction": "in" } ],
-        "clk_out1": [ { "direction": "out" } ],
-        "clk_out2": [ { "direction": "out" } ],
-        "locked": [ { "direction": "out" } ]
-      },
-      "interfaces": {
-        "reset": {
-          "vlnv": "xilinx.com:signal:reset:1.0",
-          "abstraction_type": "xilinx.com:signal:reset_rtl:1.0",
-          "mode": "slave",
-          "parameters": {
-            "POLARITY": [ { "value": "ACTIVE_HIGH", "value_src": "constant", "usage": "all" } ],
-            "BOARD.ASSOCIATED_PARAM": [ { "value": "RESET_BOARD_INTERFACE", "value_src": "constant", "usage": "all" } ],
-            "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
-          },
-          "port_maps": {
-            "RST": [ { "physical_name": "reset" } ]
-          }
-        },
-        "clock_CLK_IN1": {
-          "vlnv": "xilinx.com:signal:clock:1.0",
-          "abstraction_type": "xilinx.com:signal:clock_rtl:1.0",
-          "mode": "slave",
-          "parameters": {
-            "FREQ_HZ": [ { "value": "100000000", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
-            "FREQ_TOLERANCE_HZ": [ { "value": "0", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
-            "PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
-            "CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "ASSOCIATED_BUSIF": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "ASSOCIATED_PORT": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "ASSOCIATED_RESET": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ],
-            "BOARD.ASSOCIATED_PARAM": [ { "value": "CLK_IN1_BOARD_INTERFACE", "usage": "all", "is_static_object": false } ]
-          },
-          "port_maps": {
-            "CLK_IN1": [ { "physical_name": "clk_in1" } ]
-          }
-        },
-        "clock_CLK_OUT1": {
-          "vlnv": "xilinx.com:signal:clock:1.0",
-          "abstraction_type": "xilinx.com:signal:clock_rtl:1.0",
-          "mode": "master",
-          "parameters": {
-            "FREQ_HZ": [ { "value": "100000000", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
-            "FREQ_TOLERANCE_HZ": [ { "value": "0", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
-            "PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
-            "CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "ASSOCIATED_BUSIF": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "ASSOCIATED_PORT": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "ASSOCIATED_RESET": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
-          },
-          "port_maps": {
-            "CLK_OUT1": [ { "physical_name": "clk_out1" } ]
-          }
-        },
-        "clock_CLK_OUT2": {
-          "vlnv": "xilinx.com:signal:clock:1.0",
-          "abstraction_type": "xilinx.com:signal:clock_rtl:1.0",
-          "mode": "master",
-          "parameters": {
-            "FREQ_HZ": [ { "value": "100000000", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
-            "FREQ_TOLERANCE_HZ": [ { "value": "0", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
-            "PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
-            "CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "ASSOCIATED_BUSIF": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "ASSOCIATED_PORT": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "ASSOCIATED_RESET": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
-          },
-          "port_maps": {
-            "CLK_OUT2": [ { "physical_name": "clk_out2" } ]
-          }
-        }
-      }
-    }
-  }
-}

designs/eth_generator/Makefile

@@ -1,52 +0,0 @@
-# SPDX-License-Identifier: MIT
-#
-# Copyright (c) 2025 FPGA Ninja, LLC
-#
-# Authors:
-# - Alex Forencich
-#
-
-# FPGA settings
-FPGA_PART = xc7a35tfgg484-1
-FPGA_TOP = eth_generator_top
-FPGA_ARCH = artix7
-
-RTL_DIR = ../../rtl
-
-
-include ../../scripts/vivado.mk
-
-SYN_FILES += eth_generator.sv
-SYN_FILES += $(sort $(shell find ../../rtl -type f \( -name '*.v' -o -name '*.sv' \)))
-
-XCI_FILES = $(sort $(shell find ../../rtl/ethernet-udp/src -type f -name '*.xci'))
-XCI_FILES += $(sort $(shell find ip/ -type f -name '*.xci'))
-
-XDC_FILES += ../../constraints/ax7a035b.xdc
-XDC_FILES += debug.xdc
-
-
-
-program: $(PROJECT).bit
-	echo "open_hw_manager" > program.tcl
-	echo "connect_hw_server" >> program.tcl
-	echo "open_hw_target" >> program.tcl
-	echo "current_hw_device [lindex [get_hw_devices] 0]" >> program.tcl
-	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> program.tcl
-	echo "set_property PROGRAM.FILE {$(PROJECT).bit} [current_hw_device]" >> program.tcl
-	echo "program_hw_devices [current_hw_device]" >> program.tcl
-	echo "exit" >> program.tcl
-	vivado -nojournal -nolog -mode batch -source program.tcl
-
-$(PROJECT).mcs $(PROJECT).prm: $(PROJECT).bit
-	echo "write_cfgmem -force -format mcs -size 16 -interface SPIx4 -loadbit {up 0x0000000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
-	echo "exit" >> generate_mcs.tcl
-	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
-	mkdir -p rev
-	COUNT=100; \
-	while [ -e rev/$*_rev$$COUNT.bit ]; \
-	do COUNT=$$((COUNT+1)); done; \
-	COUNT=$$((COUNT-1)); \
-	for x in .mcs .prm; \
-	do cp $*$$x rev/$*_rev$$COUNT$$x; \
-	echo "Output: rev/$*_rev$$COUNT$$x"; done;

designs/eth_generator/README.md

@@ -1,11 +0,0 @@
-# Тестовый проект Generator + ETH + CTRL
-Проект состоит из AXIS Ethernet, контроллера и генератора. Позволяет генерировать сигналы, задав параметры через Ethernet.
-## Сборка
-```make all``` - собрать все до битстрима
-
-```make vivado``` - открыть проект в Vivado
-
-## Управление
-Используйте software/console.py. Пример:
-
-```python3 console.py --pulse_width 3_500_000 --pulse_period 20_000_000 --pulse_height 10000 --pulse_num 5500 --dac-bits 14```

designs/eth_generator/debug.xdc

@@ -1,117 +0,0 @@
-set_clock_groups -name ASYNC_UDP_CTRL -asynchronous -group [get_clocks rgmii_rxc] -group [get_clocks clk_out1_clk_wiz_ctrl_inst] -group [get_clocks clk_out2_clk_wiz_ctrl_inst]
-
-
-
-
-connect_debug_port u_ila_2/probe0 [get_nets [list {dac_pulse_height_dbg[0]} {dac_pulse_height_dbg[1]} {dac_pulse_height_dbg[2]} {dac_pulse_height_dbg[3]} {dac_pulse_height_dbg[4]} {dac_pulse_height_dbg[5]} {dac_pulse_height_dbg[6]} {dac_pulse_height_dbg[7]} {dac_pulse_height_dbg[8]} {dac_pulse_height_dbg[9]} {dac_pulse_height_dbg[10]} {dac_pulse_height_dbg[11]}]]
-connect_debug_port u_ila_2/probe1 [get_nets [list {dac_pulse_num_dbg[0]} {dac_pulse_num_dbg[1]} {dac_pulse_num_dbg[2]} {dac_pulse_num_dbg[3]} {dac_pulse_num_dbg[4]} {dac_pulse_num_dbg[5]} {dac_pulse_num_dbg[6]} {dac_pulse_num_dbg[7]} {dac_pulse_num_dbg[8]} {dac_pulse_num_dbg[9]} {dac_pulse_num_dbg[10]} {dac_pulse_num_dbg[11]} {dac_pulse_num_dbg[12]} {dac_pulse_num_dbg[13]} {dac_pulse_num_dbg[14]} {dac_pulse_num_dbg[15]}]]
-connect_debug_port u_ila_2/probe2 [get_nets [list {dac_pulse_period_dbg[0]} {dac_pulse_period_dbg[1]} {dac_pulse_period_dbg[2]} {dac_pulse_period_dbg[3]} {dac_pulse_period_dbg[4]} {dac_pulse_period_dbg[5]} {dac_pulse_period_dbg[6]} {dac_pulse_period_dbg[7]} {dac_pulse_period_dbg[8]} {dac_pulse_period_dbg[9]} {dac_pulse_period_dbg[10]} {dac_pulse_period_dbg[11]} {dac_pulse_period_dbg[12]} {dac_pulse_period_dbg[13]} {dac_pulse_period_dbg[14]} {dac_pulse_period_dbg[15]} {dac_pulse_period_dbg[16]} {dac_pulse_period_dbg[17]} {dac_pulse_period_dbg[18]} {dac_pulse_period_dbg[19]} {dac_pulse_period_dbg[20]} {dac_pulse_period_dbg[21]} {dac_pulse_period_dbg[22]} {dac_pulse_period_dbg[23]} {dac_pulse_period_dbg[24]} {dac_pulse_period_dbg[25]} {dac_pulse_period_dbg[26]} {dac_pulse_period_dbg[27]} {dac_pulse_period_dbg[28]} {dac_pulse_period_dbg[29]} {dac_pulse_period_dbg[30]} {dac_pulse_period_dbg[31]}]]
-connect_debug_port u_ila_2/probe3 [get_nets [list {dac_pulse_width_dbg[0]} {dac_pulse_width_dbg[1]} {dac_pulse_width_dbg[2]} {dac_pulse_width_dbg[3]} {dac_pulse_width_dbg[4]} {dac_pulse_width_dbg[5]} {dac_pulse_width_dbg[6]} {dac_pulse_width_dbg[7]} {dac_pulse_width_dbg[8]} {dac_pulse_width_dbg[9]} {dac_pulse_width_dbg[10]} {dac_pulse_width_dbg[11]} {dac_pulse_width_dbg[12]} {dac_pulse_width_dbg[13]} {dac_pulse_width_dbg[14]} {dac_pulse_width_dbg[15]} {dac_pulse_width_dbg[16]} {dac_pulse_width_dbg[17]} {dac_pulse_width_dbg[18]} {dac_pulse_width_dbg[19]} {dac_pulse_width_dbg[20]} {dac_pulse_width_dbg[21]} {dac_pulse_width_dbg[22]} {dac_pulse_width_dbg[23]} {dac_pulse_width_dbg[24]} {dac_pulse_width_dbg[25]} {dac_pulse_width_dbg[26]} {dac_pulse_width_dbg[27]} {dac_pulse_width_dbg[28]} {dac_pulse_width_dbg[29]} {dac_pulse_width_dbg[30]} {dac_pulse_width_dbg[31]}]]
-connect_debug_port u_ila_2/probe4 [get_nets [list dac_rst_dbg]]
-connect_debug_port u_ila_2/probe5 [get_nets [list dac_start_dbg]]
-
-
-connect_debug_port u_ila_1/probe7 [get_nets [list p2_wrt_OBUF]]
-
-create_debug_core u_ila_0 ila
-set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_0]
-set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_0]
-set_property C_ADV_TRIGGER false [get_debug_cores u_ila_0]
-set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_0]
-set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_0]
-set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_0]
-set_property C_TRIGIN_EN false [get_debug_cores u_ila_0]
-set_property C_TRIGOUT_EN false [get_debug_cores u_ila_0]
-set_property port_width 1 [get_debug_ports u_ila_0/clk]
-connect_debug_port u_ila_0/clk [get_nets [list rgmii_rxc_IBUF_BUFG]]
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe0]
-set_property port_width 3 [get_debug_ports u_ila_0/probe0]
-connect_debug_port u_ila_0/probe0 [get_nets [list {udp_ctrl_inst/eth_state[0]} {udp_ctrl_inst/eth_state[1]} {udp_ctrl_inst/eth_state[2]}]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe1]
-set_property port_width 96 [get_debug_ports u_ila_0/probe1]
-connect_debug_port u_ila_0/probe1 [get_nets [list {udp_ctrl_inst/cfg_bus_eth[0]} {udp_ctrl_inst/cfg_bus_eth[1]} {udp_ctrl_inst/cfg_bus_eth[2]} {udp_ctrl_inst/cfg_bus_eth[3]} {udp_ctrl_inst/cfg_bus_eth[4]} {udp_ctrl_inst/cfg_bus_eth[5]} {udp_ctrl_inst/cfg_bus_eth[6]} {udp_ctrl_inst/cfg_bus_eth[7]} {udp_ctrl_inst/cfg_bus_eth[8]} {udp_ctrl_inst/cfg_bus_eth[9]} {udp_ctrl_inst/cfg_bus_eth[10]} {udp_ctrl_inst/cfg_bus_eth[11]} {udp_ctrl_inst/cfg_bus_eth[12]} {udp_ctrl_inst/cfg_bus_eth[13]} {udp_ctrl_inst/cfg_bus_eth[14]} {udp_ctrl_inst/cfg_bus_eth[15]} {udp_ctrl_inst/cfg_bus_eth[16]} {udp_ctrl_inst/cfg_bus_eth[17]} {udp_ctrl_inst/cfg_bus_eth[18]} {udp_ctrl_inst/cfg_bus_eth[19]} {udp_ctrl_inst/cfg_bus_eth[20]} {udp_ctrl_inst/cfg_bus_eth[21]} {udp_ctrl_inst/cfg_bus_eth[22]} {udp_ctrl_inst/cfg_bus_eth[23]} {udp_ctrl_inst/cfg_bus_eth[24]} {udp_ctrl_inst/cfg_bus_eth[25]} {udp_ctrl_inst/cfg_bus_eth[26]} {udp_ctrl_inst/cfg_bus_eth[27]} {udp_ctrl_inst/cfg_bus_eth[28]} {udp_ctrl_inst/cfg_bus_eth[29]} {udp_ctrl_inst/cfg_bus_eth[30]} {udp_ctrl_inst/cfg_bus_eth[31]} {udp_ctrl_inst/cfg_bus_eth[32]} {udp_ctrl_inst/cfg_bus_eth[33]} {udp_ctrl_inst/cfg_bus_eth[34]} {udp_ctrl_inst/cfg_bus_eth[35]} {udp_ctrl_inst/cfg_bus_eth[36]} {udp_ctrl_inst/cfg_bus_eth[37]} {udp_ctrl_inst/cfg_bus_eth[38]} {udp_ctrl_inst/cfg_bus_eth[39]} {udp_ctrl_inst/cfg_bus_eth[40]} {udp_ctrl_inst/cfg_bus_eth[41]} {udp_ctrl_inst/cfg_bus_eth[42]} {udp_ctrl_inst/cfg_bus_eth[43]} {udp_ctrl_inst/cfg_bus_eth[44]} {udp_ctrl_inst/cfg_bus_eth[45]} {udp_ctrl_inst/cfg_bus_eth[46]} {udp_ctrl_inst/cfg_bus_eth[47]} {udp_ctrl_inst/cfg_bus_eth[48]} {udp_ctrl_inst/cfg_bus_eth[49]} {udp_ctrl_inst/cfg_bus_eth[50]} {udp_ctrl_inst/cfg_bus_eth[51]} {udp_ctrl_inst/cfg_bus_eth[52]} {udp_ctrl_inst/cfg_bus_eth[53]} {udp_ctrl_inst/cfg_bus_eth[54]} {udp_ctrl_inst/cfg_bus_eth[55]} {udp_ctrl_inst/cfg_bus_eth[56]} {udp_ctrl_inst/cfg_bus_eth[57]} {udp_ctrl_inst/cfg_bus_eth[58]} {udp_ctrl_inst/cfg_bus_eth[59]} {udp_ctrl_inst/cfg_bus_eth[60]} {udp_ctrl_inst/cfg_bus_eth[61]} {udp_ctrl_inst/cfg_bus_eth[62]} {udp_ctrl_inst/cfg_bus_eth[63]} {udp_ctrl_inst/cfg_bus_eth[64]} {udp_ctrl_inst/cfg_bus_eth[65]} {udp_ctrl_inst/cfg_bus_eth[66]} {udp_ctrl_inst/cfg_bus_eth[67]} {udp_ctrl_inst/cfg_bus_eth[68]} {udp_ctrl_inst/cfg_bus_eth[69]} {udp_ctrl_inst/cfg_bus_eth[70]} {udp_ctrl_inst/cfg_bus_eth[71]} {udp_ctrl_inst/cfg_bus_eth[72]} {udp_ctrl_inst/cfg_bus_eth[73]} {udp_ctrl_inst/cfg_bus_eth[74]} {udp_ctrl_inst/cfg_bus_eth[75]} {udp_ctrl_inst/cfg_bus_eth[76]} {udp_ctrl_inst/cfg_bus_eth[77]} {udp_ctrl_inst/cfg_bus_eth[78]} {udp_ctrl_inst/cfg_bus_eth[79]} {udp_ctrl_inst/cfg_bus_eth[80]} {udp_ctrl_inst/cfg_bus_eth[81]} {udp_ctrl_inst/cfg_bus_eth[82]} {udp_ctrl_inst/cfg_bus_eth[83]} {udp_ctrl_inst/cfg_bus_eth[84]} {udp_ctrl_inst/cfg_bus_eth[85]} {udp_ctrl_inst/cfg_bus_eth[86]} {udp_ctrl_inst/cfg_bus_eth[87]} {udp_ctrl_inst/cfg_bus_eth[88]} {udp_ctrl_inst/cfg_bus_eth[89]} {udp_ctrl_inst/cfg_bus_eth[90]} {udp_ctrl_inst/cfg_bus_eth[91]} {udp_ctrl_inst/cfg_bus_eth[92]} {udp_ctrl_inst/cfg_bus_eth[93]} {udp_ctrl_inst/cfg_bus_eth[94]} {udp_ctrl_inst/cfg_bus_eth[95]}]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe2]
-set_property port_width 8 [get_debug_ports u_ila_0/probe2]
-connect_debug_port u_ila_0/probe2 [get_nets [list {m_axis_rx_tdata[0]} {m_axis_rx_tdata[1]} {m_axis_rx_tdata[2]} {m_axis_rx_tdata[3]} {m_axis_rx_tdata[4]} {m_axis_rx_tdata[5]} {m_axis_rx_tdata[6]} {m_axis_rx_tdata[7]}]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe3]
-set_property port_width 1 [get_debug_ports u_ila_0/probe3]
-connect_debug_port u_ila_0/probe3 [get_nets [list udp_ctrl_inst/axis_hs]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe4]
-set_property port_width 1 [get_debug_ports u_ila_0/probe4]
-connect_debug_port u_ila_0/probe4 [get_nets [list udp_ctrl_inst/busy_flag_eth]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe5]
-set_property port_width 1 [get_debug_ports u_ila_0/probe5]
-connect_debug_port u_ila_0/probe5 [get_nets [list m_axis_rx_tlast]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe6]
-set_property port_width 1 [get_debug_ports u_ila_0/probe6]
-connect_debug_port u_ila_0/probe6 [get_nets [list m_axis_rx_tready]]
-create_debug_core u_ila_1 ila
-set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_1]
-set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_1]
-set_property C_ADV_TRIGGER false [get_debug_cores u_ila_1]
-set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_1]
-set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_1]
-set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_1]
-set_property C_TRIGIN_EN false [get_debug_cores u_ila_1]
-set_property C_TRIGOUT_EN false [get_debug_cores u_ila_1]
-set_property port_width 1 [get_debug_ports u_ila_1/clk]
-connect_debug_port u_ila_1/clk [get_nets [list clk_wiz_ctrl_inst/inst/clk_out1]]
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe0]
-set_property port_width 14 [get_debug_ports u_ila_1/probe0]
-connect_debug_port u_ila_1/probe0 [get_nets [list {p2_data_OBUF[0]} {p2_data_OBUF[1]} {p2_data_OBUF[2]} {p2_data_OBUF[3]} {p2_data_OBUF[4]} {p2_data_OBUF[5]} {p2_data_OBUF[6]} {p2_data_OBUF[7]} {p2_data_OBUF[8]} {p2_data_OBUF[9]} {p2_data_OBUF[10]} {p2_data_OBUF[11]} {p2_data_OBUF[12]} {p2_data_OBUF[13]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe1]
-set_property port_width 16 [get_debug_ports u_ila_1/probe1]
-connect_debug_port u_ila_1/probe1 [get_nets [list {dac_pulse_num[0]} {dac_pulse_num[1]} {dac_pulse_num[2]} {dac_pulse_num[3]} {dac_pulse_num[4]} {dac_pulse_num[5]} {dac_pulse_num[6]} {dac_pulse_num[7]} {dac_pulse_num[8]} {dac_pulse_num[9]} {dac_pulse_num[10]} {dac_pulse_num[11]} {dac_pulse_num[12]} {dac_pulse_num[13]} {dac_pulse_num[14]} {dac_pulse_num[15]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe2]
-set_property port_width 14 [get_debug_ports u_ila_1/probe2]
-connect_debug_port u_ila_1/probe2 [get_nets [list {dac_pulse_height[0]} {dac_pulse_height[1]} {dac_pulse_height[2]} {dac_pulse_height[3]} {dac_pulse_height[4]} {dac_pulse_height[5]} {dac_pulse_height[6]} {dac_pulse_height[7]} {dac_pulse_height[8]} {dac_pulse_height[9]} {dac_pulse_height[10]} {dac_pulse_height[11]} {dac_pulse_height[12]} {dac_pulse_height[13]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe3]
-set_property port_width 32 [get_debug_ports u_ila_1/probe3]
-connect_debug_port u_ila_1/probe3 [get_nets [list {dac_pulse_period[0]} {dac_pulse_period[1]} {dac_pulse_period[2]} {dac_pulse_period[3]} {dac_pulse_period[4]} {dac_pulse_period[5]} {dac_pulse_period[6]} {dac_pulse_period[7]} {dac_pulse_period[8]} {dac_pulse_period[9]} {dac_pulse_period[10]} {dac_pulse_period[11]} {dac_pulse_period[12]} {dac_pulse_period[13]} {dac_pulse_period[14]} {dac_pulse_period[15]} {dac_pulse_period[16]} {dac_pulse_period[17]} {dac_pulse_period[18]} {dac_pulse_period[19]} {dac_pulse_period[20]} {dac_pulse_period[21]} {dac_pulse_period[22]} {dac_pulse_period[23]} {dac_pulse_period[24]} {dac_pulse_period[25]} {dac_pulse_period[26]} {dac_pulse_period[27]} {dac_pulse_period[28]} {dac_pulse_period[29]} {dac_pulse_period[30]} {dac_pulse_period[31]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe4]
-set_property port_width 32 [get_debug_ports u_ila_1/probe4]
-connect_debug_port u_ila_1/probe4 [get_nets [list {dac_pulse_width[0]} {dac_pulse_width[1]} {dac_pulse_width[2]} {dac_pulse_width[3]} {dac_pulse_width[4]} {dac_pulse_width[5]} {dac_pulse_width[6]} {dac_pulse_width[7]} {dac_pulse_width[8]} {dac_pulse_width[9]} {dac_pulse_width[10]} {dac_pulse_width[11]} {dac_pulse_width[12]} {dac_pulse_width[13]} {dac_pulse_width[14]} {dac_pulse_width[15]} {dac_pulse_width[16]} {dac_pulse_width[17]} {dac_pulse_width[18]} {dac_pulse_width[19]} {dac_pulse_width[20]} {dac_pulse_width[21]} {dac_pulse_width[22]} {dac_pulse_width[23]} {dac_pulse_width[24]} {dac_pulse_width[25]} {dac_pulse_width[26]} {dac_pulse_width[27]} {dac_pulse_width[28]} {dac_pulse_width[29]} {dac_pulse_width[30]} {dac_pulse_width[31]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe5]
-set_property port_width 1 [get_debug_ports u_ila_1/probe5]
-connect_debug_port u_ila_1/probe5 [get_nets [list dac_rst]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe6]
-set_property port_width 1 [get_debug_ports u_ila_1/probe6]
-connect_debug_port u_ila_1/probe6 [get_nets [list dac_start]]
-create_debug_core u_ila_2 ila
-set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_2]
-set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_2]
-set_property C_ADV_TRIGGER false [get_debug_cores u_ila_2]
-set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_2]
-set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_2]
-set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_2]
-set_property C_TRIGIN_EN false [get_debug_cores u_ila_2]
-set_property C_TRIGOUT_EN false [get_debug_cores u_ila_2]
-set_property port_width 1 [get_debug_ports u_ila_2/clk]
-connect_debug_port u_ila_2/clk [get_nets [list clk_wiz_ctrl_inst/inst/clk_out2]]
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe0]
-set_property port_width 8 [get_debug_ports u_ila_2/probe0]
-connect_debug_port u_ila_2/probe0 [get_nets [list {finish_cnt[0]} {finish_cnt[1]} {finish_cnt[2]} {finish_cnt[3]} {finish_cnt[4]} {finish_cnt[5]} {finish_cnt[6]} {finish_cnt[7]}]]
-create_debug_port u_ila_2 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe1]
-set_property port_width 1 [get_debug_ports u_ila_2/probe1]
-connect_debug_port u_ila_2/probe1 [get_nets [list finish_dbg]]
-create_debug_port u_ila_2 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe2]
-set_property port_width 1 [get_debug_ports u_ila_2/probe2]
-connect_debug_port u_ila_2/probe2 [get_nets [list finish_pending]]
-set_property C_CLK_INPUT_FREQ_HZ 300000000 [get_debug_cores dbg_hub]
-set_property C_ENABLE_CLK_DIVIDER false [get_debug_cores dbg_hub]
-set_property C_USER_SCAN_CHAIN 1 [get_debug_cores dbg_hub]
-connect_debug_port dbg_hub/clk [get_nets adc_clk]

designs/eth_generator/eth_generator.sv

@@ -1,345 +0,0 @@
-`timescale 1 ns / 1 ns
-
-module eth_generator_top #(
-    parameter int unsigned DAC_DATA_WIDTH = 14
-)(
-    input               sys_clk_p,
-    input               sys_clk_n,
-    input               rst_n,
-
-    output [3:0]        led,
-
-    output              e_reset,
-    output              e_mdc,
-    inout               e_mdio,
-
-    output [3:0]        rgmii_txd,
-    output              rgmii_txctl,
-    output              rgmii_txc,
-    input  [3:0]        rgmii_rxd,
-    input               rgmii_rxctl,
-    input               rgmii_rxc,
-
-    // DAC
-    output              p2_clk,
-    output              p2_wrt,
-    (* MARK_DEBUG="true" *) output [13:0]       p2_data
-);
-
-    // -------------------------------------------------------------------------
-    // Internal GMII-side signals
-    // -------------------------------------------------------------------------
-    wire  [7:0] gmii_txd;
-    wire        gmii_tx_en;
-    wire        gmii_tx_er;
-    wire        gmii_tx_clk;
-    wire        gmii_crs;
-    wire        gmii_col;
-    wire  [7:0] gmii_rxd_i;
-    wire        gmii_rx_dv;
-    wire        gmii_rx_er;
-    wire        gmii_rx_clk;
-
-    wire [31:0] pack_total_len;
-
-    wire        e_rx_dv;
-    wire [7:0]  e_rxd;
-    wire        e_tx_en;
-    wire [7:0]  e_txd;
-    wire        e_rst_n;
-    wire        sys_clk;
-
-    wire        duplex_mode;
-    
-
-    assign duplex_mode = 1'b1;
-
-    // -------------------------------------------------------------------------
-    // System clock buffer (200 MHz differential input)
-    // -------------------------------------------------------------------------
-    IBUFDS sys_clk_ibufgds (
-        .O  (sys_clk),
-        .I  (sys_clk_p),
-        .IB (sys_clk_n)
-    );
-
-    // -------------------------------------------------------------------------
-    // IDELAYCTRL
-    // -------------------------------------------------------------------------
-    (* IODELAY_GROUP = "rgmii_idelay_group" *)
-    IDELAYCTRL IDELAYCTRL_inst (
-        .RDY    (),
-        .REFCLK (sys_clk),
-        .RST    (1'b0)
-    );
-
-    // -------------------------------------------------------------------------
-    // Generated clocks for controller
-    // Need to create this IP in Vivado:
-    //  input : 200 MHz
-    //  output0: 130 MHz
-    //  output1: 65 MHz
-    // -------------------------------------------------------------------------
-    wire dac_clk;
-    wire adc_clk;
-    wire clk_wiz_locked;
-
-    clk_wiz_ctrl_inst clk_wiz_ctrl_inst (
-        .clk_in1   (sys_clk),
-        .reset    (~rst_n),
-        .clk_out1  (dac_clk),   // 130 MHz
-        .clk_out2  (adc_clk),   // 65 MHz
-        .locked    (clk_wiz_locked)
-    );
-
-    // -------------------------------------------------------------------------
-    // GMII <-> RGMII conversion
-    // -------------------------------------------------------------------------
-    util_gmii_to_rgmii util_gmii_to_rgmii_m0 (
-        .reset           (1'b0),
-        .rgmii_td        (rgmii_txd),
-        .rgmii_tx_ctl    (rgmii_txctl),
-        .rgmii_txc       (rgmii_txc),
-        .rgmii_rd        (rgmii_rxd),
-        .rgmii_rx_ctl    (rgmii_rxctl),
-        .gmii_rx_clk     (gmii_rx_clk),
-        .gmii_txd        (e_txd),
-        .gmii_tx_en      (e_tx_en),
-        .gmii_tx_er      (1'b0),
-        .gmii_tx_clk     (gmii_tx_clk),
-        .gmii_crs        (gmii_crs),
-        .gmii_col        (gmii_col),
-        .gmii_rxd        (gmii_rxd_i),
-        .rgmii_rxc       (rgmii_rxc),
-        .gmii_rx_dv      (gmii_rx_dv),
-        .gmii_rx_er      (gmii_rx_er),
-        .speed_selection (2'b10),
-        .duplex_mode     (duplex_mode)
-    );
-
-    // -------------------------------------------------------------------------
-    // GMII arbitration / adaptation
-    // -------------------------------------------------------------------------
-    gmii_arbi arbi_inst (
-        .clk            (gmii_tx_clk),
-        .rst_n          (rst_n),
-        .speed          (2'b10),
-        .link           (1'b1),
-        .pack_total_len (pack_total_len),
-        .e_rst_n        (e_rst_n),
-        .gmii_rx_dv     (gmii_rx_dv),
-        .gmii_rxd       (gmii_rxd_i),
-        .gmii_tx_en     (gmii_tx_en),
-        .gmii_txd       (gmii_txd),
-        .e_rx_dv        (e_rx_dv),
-        .e_rxd          (e_rxd),
-        .e_tx_en        (e_tx_en),
-        .e_txd          (e_txd)
-    );
-
-    // -------------------------------------------------------------------------
-    // axis_mac interface
-    // RX stream from Ethernet goes into controller
-    // TX stream is unused for now
-    // -------------------------------------------------------------------------
-    wire        req_ready;
-
-    reg         send_req;
-    reg  [15:0] data_length;
-
-    reg  [7:0]  s_axis_tx_tdata;
-    reg         s_axis_tx_tvalid;
-    wire        s_axis_tx_tready;
-    reg         s_axis_tx_tlast;
-
-    (* MARK_DEBUG="true" *) wire [7:0]  m_axis_rx_tdata;
-    (* MARK_DEBUG="true" *) wire        m_axis_rx_tvalid;
-    (* MARK_DEBUG="true" *) wire        m_axis_rx_tlast;
-    (* MARK_DEBUG="true" *) wire        m_axis_rx_tready;
-
-    // Always ready to accept RX payload bytes
-    assign m_axis_rx_tready = 1'b1;
-
-    // TX disabled
-    always @(*) begin
-        send_req        = 1'b0;
-        data_length     = 16'd0;
-        s_axis_tx_tdata = 8'd0;
-        s_axis_tx_tvalid= 1'b0;
-        s_axis_tx_tlast = 1'b0;
-    end
-
-    axis_mac axis_mac0 (
-        .gmii_tx_clk       (gmii_tx_clk),
-        .gmii_rx_clk       (gmii_rx_clk),
-        .rst_n             (e_rst_n),
-
-        .gmii_rx_dv        (e_rx_dv),
-        .gmii_rxd          (e_rxd),
-        .gmii_tx_en        (gmii_tx_en),
-        .gmii_txd          (gmii_txd),
-
-        .send_req          (send_req),
-        .data_length       (data_length),
-        .req_ready         (req_ready),
-
-        .s_axis_tx_tdata   (s_axis_tx_tdata),
-        .s_axis_tx_tvalid  (s_axis_tx_tvalid),
-        .s_axis_tx_tready  (s_axis_tx_tready),
-        .s_axis_tx_tlast   (s_axis_tx_tlast),
-
-        .m_axis_rx_tdata   (m_axis_rx_tdata),
-        .m_axis_rx_tvalid  (m_axis_rx_tvalid),
-        .m_axis_rx_tready  (m_axis_rx_tready),
-        .m_axis_rx_tlast   (m_axis_rx_tlast)
-    );
-
-    // PHY reset helper from your original example
-    reset reset_m0 (
-        .clk   (sys_clk),
-        .key1  (rst_n),
-        .rst_n (e_reset)
-    );
-
-    // MDIO lines are not driven here yet
-    assign e_mdc  = 1'b0;
-    assign e_mdio = 1'bz;
-
-    // -------------------------------------------------------------------------
-    // Controller reset
-    // Use both external reset and clk_wiz lock
-    // -------------------------------------------------------------------------
-    wire ctrl_rst_n = rst_n & clk_wiz_locked;
-
-    // -------------------------------------------------------------------------
-    // Debug finish generator (still used here, since generator doesn't have finish signal)
-    //
-    // After each adc_start pulse generates one finish pulse after some delay.
-    // This is just for first bring-up so the controller can leave busy state
-    // If you don't want this, replace with:
-    // wire finish_dbg = 1'b0;
-    // -------------------------------------------------------------------------
-    (* MARK_DEBUG="true" *) logic        finish_dbg;
-    (* MARK_DEBUG="true" *) logic [7:0]  finish_cnt;
-    (* MARK_DEBUG="true" *) logic        finish_pending;
-
-    // Controller outputs to debug
-    (* MARK_DEBUG="true" *) wire [31:0]               dac_pulse_width;
-    (* MARK_DEBUG="true" *) wire [31:0]               dac_pulse_period;
-    (* MARK_DEBUG="true" *) wire [DAC_DATA_WIDTH-1:0] dac_pulse_height;
-    (* MARK_DEBUG="true" *) wire [15:0]               dac_pulse_num;
-
-    (* MARK_DEBUG="true" *) wire [31:0]               adc_pulse_period_dbg;
-    (* MARK_DEBUG="true" *) wire [15:0]               adc_pulse_num_dbg;
-
-    (* MARK_DEBUG="true" *) wire                      dac_start;
-    (* MARK_DEBUG="true" *) wire                      adc_start_dbg;
-    (* MARK_DEBUG="true" *) wire                      dac_rst;
-    (* MARK_DEBUG="true" *) wire                      adc_rst_dbg;
-
-    always_ff @(posedge adc_clk or negedge ctrl_rst_n) begin
-        if (!ctrl_rst_n) begin
-            finish_dbg     <= 1'b0;
-            finish_cnt     <= 8'd0;
-            finish_pending <= 1'b0;
-        end else begin
-            finish_dbg <= 1'b0;
-
-            if (adc_start_dbg) begin
-                finish_pending <= 1'b1;
-                finish_cnt     <= 8'd80;
-            end else if (finish_pending) begin
-                if (finish_cnt == 8'd0) begin
-                    finish_dbg     <= 1'b1;
-                    finish_pending <= 1'b0;
-                end else begin
-                    finish_cnt <= finish_cnt - 8'd1;
-                end
-            end
-        end
-    end
-
-    // -------------------------------------------------------------------------
-    // Controller
-    // ETH domain = gmii_rx_clk, because RX AXI master comes from axis_mac RX side
-    // -------------------------------------------------------------------------
-    control #(
-        .DAC_DATA_WIDTH(DAC_DATA_WIDTH)
-    ) udp_ctrl_inst (
-        .eth_clk_in        (gmii_rx_clk),
-        .dac_clk_in        (dac_clk),
-        .adc_clk_in        (adc_clk),
-        .rst_n             (ctrl_rst_n),
-
-        .s_axis_tdata      (m_axis_rx_tdata),
-        .s_axis_tvalid     (m_axis_rx_tvalid),
-        .s_axis_tready     (), // controller internally always ready in current version
-        .s_axis_tlast      (m_axis_rx_tlast),
-
-        .finish            (finish_dbg),
-
-        .dac_pulse_width   (dac_pulse_width),
-        .dac_pulse_period  (dac_pulse_period),
-        .dac_pulse_height  (dac_pulse_height),
-        .dac_pulse_num     (dac_pulse_num),
-
-        .adc_pulse_period  (adc_pulse_period_dbg),
-        .adc_pulse_num     (adc_pulse_num_dbg),
-
-        .dac_start         (dac_start),
-        .adc_start         (adc_start_dbg),
-
-        .dac_rst           (dac_rst),
-        .adc_rst           (adc_rst_dbg)
-    );
-
-    // -------------------------------------------------------------------------
-    // DAC
-    // -------------------------------------------------------------------------
-    generator #(
-        .DATA_WIDTH(DAC_DATA_WIDTH)
-    ) generator_inst (
-        .clk_in(dac_clk),
-        .rst(dac_rst),
-        .start(dac_start),
-        .pulse_width(dac_pulse_width),
-        .pulse_period(dac_pulse_period),
-        .pulse_height(dac_pulse_height),
-        .pulse_num(dac_pulse_num),
-        .pulse(p2_wrt ),
-        .pulse_height_out(p2_data)
-    );
-
-    // dac clk mgt
-    wire p2_clk_oddr;
-
-    ODDR #(
-        .DDR_CLK_EDGE("SAME_EDGE"),
-        .INIT(1'b0),
-        .SRTYPE("SYNC")
-    ) ODDR_p2_clk (
-        .Q (p2_clk_oddr),
-        .C (dac_clk),
-        .CE(1'b1),
-        .D1(1'b1),
-        .D2(1'b0),
-        .R (1'b0),
-        .S (1'b0)
-    );
-
-    OBUF OBUF_p2_clk (
-        .I(p2_clk_oddr),
-        .O(p2_clk)
-    );
-    
-    //assign p2_wrt = p2_clk;
-
-    // -------------------------------------------------------------------------
-    // Simple LED status
-    // -------------------------------------------------------------------------
-    assign led[0] = clk_wiz_locked;
-    assign led[1] = m_axis_rx_tvalid;
-    assign led[2] = dac_start;
-    assign led[3] = adc_rst_dbg;
-
-endmodule

designs/eth_generator/ip/clk_wiz_ctrl_inst.xci

@@ -1,689 +0,0 @@
-{
-  "schema": "xilinx.com:schema:json_instance:1.0",
-  "ip_inst": {
-    "xci_name": "clk_wiz_ctrl_inst",
-    "component_reference": "xilinx.com:ip:clk_wiz:6.0",
-    "ip_revision": "16",
-    "gen_directory": "../../../../eth_generator_top.gen/sources_1/ip/clk_wiz_ctrl_inst",
-    "parameters": {
-      "component_parameters": {
-        "Component_Name": [ { "value": "clk_wiz_ctrl_inst", "resolve_type": "user", "usage": "all" } ],
-        "USER_CLK_FREQ0": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "USER_CLK_FREQ1": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "USER_CLK_FREQ2": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "USER_CLK_FREQ3": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "ENABLE_CLOCK_MONITOR": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "OPTIMIZE_CLOCKING_STRUCTURE_EN": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "ENABLE_USER_CLOCK0": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "ENABLE_USER_CLOCK1": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "ENABLE_USER_CLOCK2": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "ENABLE_USER_CLOCK3": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "Enable_PLL0": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "Enable_PLL1": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "REF_CLK_FREQ": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PRECISION": [ { "value": "1", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PRIMITIVE": [ { "value": "MMCM", "resolve_type": "user", "usage": "all" } ],
-        "PRIMTYPE_SEL": [ { "value": "mmcm_adv", "resolve_type": "user", "usage": "all" } ],
-        "CLOCK_MGR_TYPE": [ { "value": "auto", "resolve_type": "user", "usage": "all" } ],
-        "USE_FREQ_SYNTH": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_SPREAD_SPECTRUM": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_PHASE_ALIGNMENT": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_MIN_POWER": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_DYN_PHASE_SHIFT": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_DYN_RECONFIG": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "JITTER_SEL": [ { "value": "No_Jitter", "resolve_type": "user", "usage": "all" } ],
-        "PRIM_IN_FREQ": [ { "value": "200.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PRIM_IN_TIMEPERIOD": [ { "value": "10.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "IN_FREQ_UNITS": [ { "value": "Units_MHz", "resolve_type": "user", "usage": "all" } ],
-        "PHASESHIFT_MODE": [ { "value": "WAVEFORM", "resolve_type": "user", "usage": "all" } ],
-        "IN_JITTER_UNITS": [ { "value": "Units_UI", "resolve_type": "user", "usage": "all" } ],
-        "RELATIVE_INCLK": [ { "value": "REL_PRIMARY", "resolve_type": "user", "usage": "all" } ],
-        "USE_INCLK_SWITCHOVER": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "SECONDARY_IN_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "SECONDARY_IN_TIMEPERIOD": [ { "value": "10.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "SECONDARY_PORT": [ { "value": "clk_in2", "resolve_type": "user", "usage": "all" } ],
-        "SECONDARY_SOURCE": [ { "value": "Single_ended_clock_capable_pin", "resolve_type": "user", "usage": "all" } ],
-        "JITTER_OPTIONS": [ { "value": "UI", "resolve_type": "user", "usage": "all" } ],
-        "CLKIN1_UI_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKIN2_UI_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PRIM_IN_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "SECONDARY_IN_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKIN1_JITTER_PS": [ { "value": "50.0", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKIN2_JITTER_PS": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT1_USED": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT2_USED": [ { "value": "true", "value_src": "user", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT3_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT4_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT5_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT6_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT7_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "NUM_OUT_CLKS": [ { "value": "2", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "CLK_OUT1_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLK_OUT2_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLK_OUT3_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLK_OUT4_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLK_OUT5_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLK_OUT6_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLK_OUT7_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "PRIMARY_PORT": [ { "value": "clk_in1", "resolve_type": "user", "usage": "all" } ],
-        "CLK_OUT1_PORT": [ { "value": "clk_out1", "resolve_type": "user", "usage": "all" } ],
-        "CLK_OUT2_PORT": [ { "value": "clk_out2", "resolve_type": "user", "usage": "all" } ],
-        "CLK_OUT3_PORT": [ { "value": "clk_out3", "resolve_type": "user", "usage": "all" } ],
-        "CLK_OUT4_PORT": [ { "value": "clk_out4", "resolve_type": "user", "usage": "all" } ],
-        "CLK_OUT5_PORT": [ { "value": "clk_out5", "resolve_type": "user", "usage": "all" } ],
-        "CLK_OUT6_PORT": [ { "value": "clk_out6", "resolve_type": "user", "usage": "all" } ],
-        "CLK_OUT7_PORT": [ { "value": "clk_out7", "resolve_type": "user", "usage": "all" } ],
-        "DADDR_PORT": [ { "value": "daddr", "resolve_type": "user", "usage": "all" } ],
-        "DCLK_PORT": [ { "value": "dclk", "resolve_type": "user", "usage": "all" } ],
-        "DRDY_PORT": [ { "value": "drdy", "resolve_type": "user", "usage": "all" } ],
-        "DWE_PORT": [ { "value": "dwe", "resolve_type": "user", "usage": "all" } ],
-        "DIN_PORT": [ { "value": "din", "resolve_type": "user", "usage": "all" } ],
-        "DOUT_PORT": [ { "value": "dout", "resolve_type": "user", "usage": "all" } ],
-        "DEN_PORT": [ { "value": "den", "resolve_type": "user", "usage": "all" } ],
-        "PSCLK_PORT": [ { "value": "psclk", "resolve_type": "user", "usage": "all" } ],
-        "PSEN_PORT": [ { "value": "psen", "resolve_type": "user", "usage": "all" } ],
-        "PSINCDEC_PORT": [ { "value": "psincdec", "resolve_type": "user", "usage": "all" } ],
-        "PSDONE_PORT": [ { "value": "psdone", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT1_REQUESTED_OUT_FREQ": [ { "value": "125", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT1_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT1_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT2_REQUESTED_OUT_FREQ": [ { "value": "65.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT2_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT2_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT3_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT3_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT3_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT4_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT4_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT4_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT5_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT5_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT5_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT6_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT6_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT6_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT7_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT7_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT7_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "USE_MAX_I_JITTER": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_MIN_O_JITTER": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT1_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT2_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT3_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT4_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT5_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT6_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT7_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "PRIM_SOURCE": [ { "value": "Single_ended_clock_capable_pin", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT1_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT2_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT3_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT4_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT5_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT6_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT7_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
-        "FEEDBACK_SOURCE": [ { "value": "FDBK_AUTO", "resolve_type": "user", "usage": "all" } ],
-        "CLKFB_IN_SIGNALING": [ { "value": "SINGLE", "resolve_type": "user", "usage": "all" } ],
-        "CLKFB_IN_PORT": [ { "value": "clkfb_in", "resolve_type": "user", "usage": "all" } ],
-        "CLKFB_IN_P_PORT": [ { "value": "clkfb_in_p", "resolve_type": "user", "usage": "all" } ],
-        "CLKFB_IN_N_PORT": [ { "value": "clkfb_in_n", "resolve_type": "user", "usage": "all" } ],
-        "CLKFB_OUT_PORT": [ { "value": "clkfb_out", "resolve_type": "user", "usage": "all" } ],
-        "CLKFB_OUT_P_PORT": [ { "value": "clkfb_out_p", "resolve_type": "user", "usage": "all" } ],
-        "CLKFB_OUT_N_PORT": [ { "value": "clkfb_out_n", "resolve_type": "user", "usage": "all" } ],
-        "PLATFORM": [ { "value": "UNKNOWN", "resolve_type": "user", "usage": "all" } ],
-        "SUMMARY_STRINGS": [ { "value": "empty", "resolve_type": "user", "usage": "all" } ],
-        "USE_LOCKED": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CALC_DONE": [ { "value": "empty", "resolve_type": "user", "usage": "all" } ],
-        "USE_RESET": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_POWER_DOWN": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_STATUS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_FREEZE": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_CLK_VALID": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_INCLK_STOPPED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_CLKFB_STOPPED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "RESET_PORT": [ { "value": "reset", "resolve_type": "user", "usage": "all" } ],
-        "LOCKED_PORT": [ { "value": "locked", "resolve_type": "user", "usage": "all" } ],
-        "POWER_DOWN_PORT": [ { "value": "power_down", "resolve_type": "user", "usage": "all" } ],
-        "CLK_VALID_PORT": [ { "value": "CLK_VALID", "resolve_type": "user", "usage": "all" } ],
-        "STATUS_PORT": [ { "value": "STATUS", "resolve_type": "user", "usage": "all" } ],
-        "CLK_IN_SEL_PORT": [ { "value": "clk_in_sel", "resolve_type": "user", "usage": "all" } ],
-        "INPUT_CLK_STOPPED_PORT": [ { "value": "input_clk_stopped", "resolve_type": "user", "usage": "all" } ],
-        "CLKFB_STOPPED_PORT": [ { "value": "clkfb_stopped", "resolve_type": "user", "usage": "all" } ],
-        "SS_MODE": [ { "value": "CENTER_HIGH", "resolve_type": "user", "usage": "all" } ],
-        "SS_MOD_FREQ": [ { "value": "250", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "SS_MOD_TIME": [ { "value": "0.004", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "OVERRIDE_MMCM": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_NOTES": [ { "value": "None", "resolve_type": "user", "usage": "all" } ],
-        "MMCM_DIVCLK_DIVIDE": [ { "value": "4", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "MMCM_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "user", "usage": "all" } ],
-        "MMCM_CLKFBOUT_MULT_F": [ { "value": "16.875", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKFBOUT_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKIN1_PERIOD": [ { "value": "5.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKIN2_PERIOD": [ { "value": "10.0", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT4_CASCADE": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLOCK_HOLD": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_COMPENSATION": [ { "value": "ZHOLD", "resolve_type": "user", "usage": "all" } ],
-        "MMCM_REF_JITTER1": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_REF_JITTER2": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_STARTUP_WAIT": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT0_DIVIDE_F": [ { "value": "6.750", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT0_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT0_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT1_DIVIDE": [ { "value": "13", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "MMCM_CLKOUT1_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT1_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "MMCM_CLKOUT2_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT2_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "MMCM_CLKOUT3_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT3_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "MMCM_CLKOUT4_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT4_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT5_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "MMCM_CLKOUT5_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT5_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT6_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "MMCM_CLKOUT6_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT6_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT6_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "OVERRIDE_PLL": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "PLL_NOTES": [ { "value": "None", "resolve_type": "user", "usage": "all" } ],
-        "PLL_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "user", "usage": "all" } ],
-        "PLL_CLKFBOUT_MULT": [ { "value": "4", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "PLL_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLK_FEEDBACK": [ { "value": "CLKFBOUT", "resolve_type": "user", "usage": "all" } ],
-        "PLL_DIVCLK_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "PLL_CLKIN_PERIOD": [ { "value": "10.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_COMPENSATION": [ { "value": "SYSTEM_SYNCHRONOUS", "resolve_type": "user", "usage": "all" } ],
-        "PLL_REF_JITTER": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT0_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "PLL_CLKOUT0_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT1_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "PLL_CLKOUT1_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "PLL_CLKOUT2_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "PLL_CLKOUT3_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "PLL_CLKOUT4_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT5_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "PLL_CLKOUT5_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "PLL_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "RESET_TYPE": [ { "value": "ACTIVE_HIGH", "resolve_type": "user", "usage": "all" } ],
-        "USE_SAFE_CLOCK_STARTUP": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "USE_CLOCK_SEQUENCING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT1_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "CLKOUT2_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "CLKOUT3_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "CLKOUT4_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "CLKOUT5_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "CLKOUT6_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "CLKOUT7_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "USE_BOARD_FLOW": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLK_IN1_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
-        "CLK_IN2_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
-        "DIFF_CLK_IN1_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
-        "DIFF_CLK_IN2_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
-        "AUTO_PRIMITIVE": [ { "value": "MMCM", "resolve_type": "user", "usage": "all" } ],
-        "RESET_BOARD_INTERFACE": [ { "value": "Custom", "resolve_type": "user", "usage": "all" } ],
-        "ENABLE_CDDC": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CDDCDONE_PORT": [ { "value": "cddcdone", "resolve_type": "user", "usage": "all" } ],
-        "CDDCREQ_PORT": [ { "value": "cddcreq", "resolve_type": "user", "usage": "all" } ],
-        "ENABLE_CLKOUTPHY": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUTPHY_REQUESTED_FREQ": [ { "value": "600.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT1_JITTER": [ { "value": "162.582", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT1_PHASE_ERROR": [ { "value": "137.238", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT2_JITTER": [ { "value": "185.296", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT2_PHASE_ERROR": [ { "value": "137.238", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT3_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT3_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT4_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT4_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT5_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT5_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT6_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT6_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT7_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT7_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "INPUT_MODE": [ { "value": "frequency", "resolve_type": "user", "usage": "all" } ],
-        "INTERFACE_SELECTION": [ { "value": "Enable_AXI", "resolve_type": "user", "usage": "all" } ],
-        "AXI_DRP": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "PHASE_DUTY_CONFIG": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ]
-      },
-      "model_parameters": {
-        "C_CLKOUT2_USED": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USER_CLK_FREQ0": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_AUTO_PRIMITIVE": [ { "value": "MMCM", "resolve_type": "generated", "usage": "all" } ],
-        "C_USER_CLK_FREQ1": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_USER_CLK_FREQ2": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_USER_CLK_FREQ3": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_ENABLE_CLOCK_MONITOR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_ENABLE_USER_CLOCK0": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_ENABLE_USER_CLOCK1": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_ENABLE_USER_CLOCK2": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_ENABLE_USER_CLOCK3": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_Enable_PLL0": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_Enable_PLL1": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_REF_CLK_FREQ": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PRECISION": [ { "value": "1", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT3_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT4_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT5_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT6_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT7_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_CLKOUT1_BAR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_CLKOUT2_BAR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_CLKOUT3_BAR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_CLKOUT4_BAR": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "c_component_name": [ { "value": "clk_wiz_ctrl_inst", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLATFORM": [ { "value": "UNKNOWN", "resolve_type": "generated", "usage": "all" } ],
-        "C_USE_FREQ_SYNTH": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_PHASE_ALIGNMENT": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PRIM_IN_JITTER": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_SECONDARY_IN_JITTER": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_JITTER_SEL": [ { "value": "No_Jitter", "resolve_type": "generated", "usage": "all" } ],
-        "C_USE_MIN_POWER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_MIN_O_JITTER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_MAX_I_JITTER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_DYN_PHASE_SHIFT": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_OPTIMIZE_CLOCKING_STRUCTURE_EN": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_INCLK_SWITCHOVER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_DYN_RECONFIG": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_SPREAD_SPECTRUM": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_FAST_SIMULATION": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PRIMTYPE_SEL": [ { "value": "AUTO", "resolve_type": "generated", "usage": "all" } ],
-        "C_USE_CLK_VALID": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PRIM_IN_FREQ": [ { "value": "200.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PRIM_IN_TIMEPERIOD": [ { "value": "10.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_IN_FREQ_UNITS": [ { "value": "Units_MHz", "resolve_type": "generated", "usage": "all" } ],
-        "C_SECONDARY_IN_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_SECONDARY_IN_TIMEPERIOD": [ { "value": "10.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_FEEDBACK_SOURCE": [ { "value": "FDBK_AUTO", "resolve_type": "generated", "usage": "all" } ],
-        "C_PRIM_SOURCE": [ { "value": "Single_ended_clock_capable_pin", "resolve_type": "generated", "usage": "all" } ],
-        "C_PHASESHIFT_MODE": [ { "value": "WAVEFORM", "resolve_type": "generated", "usage": "all" } ],
-        "C_SECONDARY_SOURCE": [ { "value": "Single_ended_clock_capable_pin", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFB_IN_SIGNALING": [ { "value": "SINGLE", "resolve_type": "generated", "usage": "all" } ],
-        "C_USE_RESET": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_RESET_LOW": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_LOCKED": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_INCLK_STOPPED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_CLKFB_STOPPED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_POWER_DOWN": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_STATUS": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_FREEZE": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_NUM_OUT_CLKS": [ { "value": "2", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT1_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT2_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT3_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT4_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT5_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT6_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT7_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
-        "C_INCLK_SUM_ROW0": [ { "value": "Input Clock   Freq (MHz)    Input Jitter (UI)", "resolve_type": "generated", "usage": "all" } ],
-        "C_INCLK_SUM_ROW1": [ { "value": "__primary_________200.000____________0.010", "resolve_type": "generated", "usage": "all" } ],
-        "C_INCLK_SUM_ROW2": [ { "value": "no_secondary_input_clock ", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW0A": [ { "value": " Output     Output      Phase    Duty Cycle   Pk-to-Pk     Phase", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW0B": [ { "value": "  Clock     Freq (MHz)  (degrees)    (%)     Jitter (ps)  Error (ps)", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW1": [ { "value": "clk_out1__125.00000______0.000______50.0______162.582____137.238", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW2": [ { "value": "clk_out2__64.90385______0.000______50.0______185.296____137.238", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW3": [ { "value": "no_CLK_OUT3_output", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW4": [ { "value": "no_CLK_OUT4_output", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW5": [ { "value": "no_CLK_OUT5_output", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW6": [ { "value": "no_CLK_OUT6_output", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW7": [ { "value": "no_CLK_OUT7_output", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT1_REQUESTED_OUT_FREQ": [ { "value": "125", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT2_REQUESTED_OUT_FREQ": [ { "value": "65.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT3_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT4_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT5_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT6_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT7_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT1_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT2_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT3_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT4_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT5_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT6_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT7_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT1_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT2_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT3_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT4_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT5_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT6_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT7_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT1_OUT_FREQ": [ { "value": "125.00000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT2_OUT_FREQ": [ { "value": "64.90385", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT3_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT4_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT5_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT6_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT7_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT6_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT7_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT1_DUTY_CYCLE": [ { "value": "50.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT2_DUTY_CYCLE": [ { "value": "50.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT3_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT4_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT5_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT6_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT7_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_USE_SAFE_CLOCK_STARTUP": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_CLOCK_SEQUENCING": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT1_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT2_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT3_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT4_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT5_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT6_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT7_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_MMCM_NOTES": [ { "value": "None", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKFBOUT_MULT_F": [ { "value": "16.875", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKIN1_PERIOD": [ { "value": "5.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKIN2_PERIOD": [ { "value": "10.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT4_CASCADE": [ { "value": "FALSE", "resolve_type": "generated", "format": "bool", "usage": "all" } ],
-        "C_MMCM_CLOCK_HOLD": [ { "value": "FALSE", "resolve_type": "generated", "format": "bool", "usage": "all" } ],
-        "C_MMCM_COMPENSATION": [ { "value": "ZHOLD", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_DIVCLK_DIVIDE": [ { "value": "4", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_MMCM_REF_JITTER1": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_REF_JITTER2": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_STARTUP_WAIT": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKOUT0_DIVIDE_F": [ { "value": "6.750", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT1_DIVIDE": [ { "value": "13", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_MMCM_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_MMCM_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_MMCM_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_MMCM_CLKOUT5_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_MMCM_CLKOUT6_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_MMCM_CLKOUT0_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT1_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT2_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT3_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT4_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT5_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT6_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT6_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKFBOUT_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKOUT0_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKOUT1_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKOUT2_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKOUT3_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKOUT4_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKOUT5_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKOUT6_USE_FINE_PS": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLL_NOTES": [ { "value": "No notes", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLL_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLL_CLK_FEEDBACK": [ { "value": "CLKFBOUT", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLL_CLKFBOUT_MULT": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PLL_CLKIN_PERIOD": [ { "value": "1.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_COMPENSATION": [ { "value": "SYSTEM_SYNCHRONOUS", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLL_DIVCLK_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PLL_REF_JITTER": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT0_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PLL_CLKOUT1_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PLL_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PLL_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PLL_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PLL_CLKOUT5_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PLL_CLKOUT0_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT1_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT2_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT3_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT4_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT5_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PLL_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLOCK_MGR_TYPE": [ { "value": "NA", "resolve_type": "generated", "usage": "all" } ],
-        "C_OVERRIDE_MMCM": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_OVERRIDE_PLL": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PRIMARY_PORT": [ { "value": "clk_in1", "resolve_type": "generated", "usage": "all" } ],
-        "C_SECONDARY_PORT": [ { "value": "clk_in2", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_OUT1_PORT": [ { "value": "clk_out1", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_OUT2_PORT": [ { "value": "clk_out2", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_OUT3_PORT": [ { "value": "clk_out3", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_OUT4_PORT": [ { "value": "clk_out4", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_OUT5_PORT": [ { "value": "clk_out5", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_OUT6_PORT": [ { "value": "clk_out6", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_OUT7_PORT": [ { "value": "clk_out7", "resolve_type": "generated", "usage": "all" } ],
-        "C_RESET_PORT": [ { "value": "reset", "resolve_type": "generated", "usage": "all" } ],
-        "C_LOCKED_PORT": [ { "value": "locked", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFB_IN_PORT": [ { "value": "clkfb_in", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFB_IN_P_PORT": [ { "value": "clkfb_in_p", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFB_IN_N_PORT": [ { "value": "clkfb_in_n", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFB_OUT_PORT": [ { "value": "clkfb_out", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFB_OUT_P_PORT": [ { "value": "clkfb_out_p", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFB_OUT_N_PORT": [ { "value": "clkfb_out_n", "resolve_type": "generated", "usage": "all" } ],
-        "C_POWER_DOWN_PORT": [ { "value": "power_down", "resolve_type": "generated", "usage": "all" } ],
-        "C_DADDR_PORT": [ { "value": "daddr", "resolve_type": "generated", "usage": "all" } ],
-        "C_DCLK_PORT": [ { "value": "dclk", "resolve_type": "generated", "usage": "all" } ],
-        "C_DRDY_PORT": [ { "value": "drdy", "resolve_type": "generated", "usage": "all" } ],
-        "C_DWE_PORT": [ { "value": "dwe", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIN_PORT": [ { "value": "din", "resolve_type": "generated", "usage": "all" } ],
-        "C_DOUT_PORT": [ { "value": "dout", "resolve_type": "generated", "usage": "all" } ],
-        "C_DEN_PORT": [ { "value": "den", "resolve_type": "generated", "usage": "all" } ],
-        "C_PSCLK_PORT": [ { "value": "psclk", "resolve_type": "generated", "usage": "all" } ],
-        "C_PSEN_PORT": [ { "value": "psen", "resolve_type": "generated", "usage": "all" } ],
-        "C_PSINCDEC_PORT": [ { "value": "psincdec", "resolve_type": "generated", "usage": "all" } ],
-        "C_PSDONE_PORT": [ { "value": "psdone", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_VALID_PORT": [ { "value": "CLK_VALID", "resolve_type": "generated", "usage": "all" } ],
-        "C_STATUS_PORT": [ { "value": "STATUS", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_IN_SEL_PORT": [ { "value": "clk_in_sel", "resolve_type": "generated", "usage": "all" } ],
-        "C_INPUT_CLK_STOPPED_PORT": [ { "value": "input_clk_stopped", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFB_STOPPED_PORT": [ { "value": "clkfb_stopped", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKIN1_JITTER_PS": [ { "value": "50.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKIN2_JITTER_PS": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_PRIMITIVE": [ { "value": "MMCM", "resolve_type": "generated", "usage": "all" } ],
-        "C_SS_MODE": [ { "value": "CENTER_HIGH", "resolve_type": "generated", "usage": "all" } ],
-        "C_SS_MOD_PERIOD": [ { "value": "4000", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_SS_MOD_TIME": [ { "value": "0.004", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_HAS_CDDC": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CDDCDONE_PORT": [ { "value": "cddcdone", "resolve_type": "generated", "usage": "all" } ],
-        "C_CDDCREQ_PORT": [ { "value": "cddcreq", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUTPHY_MODE": [ { "value": "VCO", "resolve_type": "generated", "usage": "all" } ],
-        "C_ENABLE_CLKOUTPHY": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_INTERFACE_SELECTION": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_S_AXI_ADDR_WIDTH": [ { "value": "11", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_S_AXI_DATA_WIDTH": [ { "value": "32", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_POWER_REG": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT0_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT0_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT1_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT1_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT2_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT2_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT3_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT3_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT4_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT4_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT5_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT5_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT6_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT6_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFBOUT_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKFBOUT_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVCLK": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_LOCK_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_LOCK_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_LOCK_3": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_FILTER_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_FILTER_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE1_AUTO": [ { "value": "1", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE2_AUTO": [ { "value": "1.9259259259259258", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE3_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE4_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE5_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE6_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE7_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLLBUFGCEDIV": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCMBUFGCEDIV": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLLBUFGCEDIV1": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLLBUFGCEDIV2": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLLBUFGCEDIV3": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_PLLBUFGCEDIV4": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCMBUFGCEDIV1": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCMBUFGCEDIV2": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCMBUFGCEDIV3": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCMBUFGCEDIV4": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCMBUFGCEDIV5": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCMBUFGCEDIV6": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCMBUFGCEDIV7": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT1_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT2_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT3_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT4_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT5_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT6_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT7_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT0_ACTUAL_FREQ": [ { "value": "125.00000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT1_ACTUAL_FREQ": [ { "value": "64.90385", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT2_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT3_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT4_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT5_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT6_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
-        "C_M_MAX": [ { "value": "64.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_M_MIN": [ { "value": "2.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_D_MAX": [ { "value": "80.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_D_MIN": [ { "value": "1.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_O_MAX": [ { "value": "128.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_O_MIN": [ { "value": "1.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_VCO_MIN": [ { "value": "600.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_VCO_MAX": [ { "value": "1200.000", "resolve_type": "generated", "format": "float", "usage": "all" } ]
-      },
-      "project_parameters": {
-        "ARCHITECTURE": [ { "value": "artix7" } ],
-        "BASE_BOARD_PART": [ { "value": "" } ],
-        "BOARD_CONNECTIONS": [ { "value": "" } ],
-        "DEVICE": [ { "value": "xc7a35t" } ],
-        "PACKAGE": [ { "value": "fgg484" } ],
-        "PREFHDL": [ { "value": "VERILOG" } ],
-        "SILICON_REVISION": [ { "value": "" } ],
-        "SIMULATOR_LANGUAGE": [ { "value": "MIXED" } ],
-        "SPEEDGRADE": [ { "value": "-1" } ],
-        "STATIC_POWER": [ { "value": "" } ],
-        "TEMPERATURE_GRADE": [ { "value": "" } ]
-      },
-      "runtime_parameters": {
-        "IPCONTEXT": [ { "value": "IP_Flow" } ],
-        "IPREVISION": [ { "value": "16" } ],
-        "MANAGED": [ { "value": "TRUE" } ],
-        "OUTPUTDIR": [ { "value": "../../../../eth_generator_top.gen/sources_1/ip/clk_wiz_ctrl_inst" } ],
-        "SELECTEDSIMMODEL": [ { "value": "" } ],
-        "SHAREDDIR": [ { "value": "." } ],
-        "SWVERSION": [ { "value": "2025.1" } ],
-        "SYNTHESISFLOW": [ { "value": "OUT_OF_CONTEXT" } ]
-      }
-    },
-    "boundary": {
-      "ports": {
-        "reset": [ { "direction": "in", "driver_value": "0" } ],
-        "clk_in1": [ { "direction": "in" } ],
-        "clk_out1": [ { "direction": "out" } ],
-        "clk_out2": [ { "direction": "out" } ],
-        "locked": [ { "direction": "out" } ]
-      },
-      "interfaces": {
-        "reset": {
-          "vlnv": "xilinx.com:signal:reset:1.0",
-          "abstraction_type": "xilinx.com:signal:reset_rtl:1.0",
-          "mode": "slave",
-          "parameters": {
-            "POLARITY": [ { "value": "ACTIVE_HIGH", "value_src": "constant", "usage": "all" } ],
-            "BOARD.ASSOCIATED_PARAM": [ { "value": "RESET_BOARD_INTERFACE", "value_src": "constant", "usage": "all" } ],
-            "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
-          },
-          "port_maps": {
-            "RST": [ { "physical_name": "reset" } ]
-          }
-        },
-        "clock_CLK_IN1": {
-          "vlnv": "xilinx.com:signal:clock:1.0",
-          "abstraction_type": "xilinx.com:signal:clock_rtl:1.0",
-          "mode": "slave",
-          "parameters": {
-            "FREQ_HZ": [ { "value": "100000000", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
-            "FREQ_TOLERANCE_HZ": [ { "value": "0", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
-            "PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
-            "CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "ASSOCIATED_BUSIF": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "ASSOCIATED_PORT": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "ASSOCIATED_RESET": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ],
-            "BOARD.ASSOCIATED_PARAM": [ { "value": "CLK_IN1_BOARD_INTERFACE", "usage": "all", "is_static_object": false } ]
-          },
-          "port_maps": {
-            "CLK_IN1": [ { "physical_name": "clk_in1" } ]
-          }
-        },
-        "clock_CLK_OUT1": {
-          "vlnv": "xilinx.com:signal:clock:1.0",
-          "abstraction_type": "xilinx.com:signal:clock_rtl:1.0",
-          "mode": "master",
-          "parameters": {
-            "FREQ_HZ": [ { "value": "100000000", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
-            "FREQ_TOLERANCE_HZ": [ { "value": "0", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
-            "PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
-            "CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "ASSOCIATED_BUSIF": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "ASSOCIATED_PORT": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "ASSOCIATED_RESET": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
-          },
-          "port_maps": {
-            "CLK_OUT1": [ { "physical_name": "clk_out1" } ]
-          }
-        },
-        "clock_CLK_OUT2": {
-          "vlnv": "xilinx.com:signal:clock:1.0",
-          "abstraction_type": "xilinx.com:signal:clock_rtl:1.0",
-          "mode": "master",
-          "parameters": {
-            "FREQ_HZ": [ { "value": "100000000", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
-            "FREQ_TOLERANCE_HZ": [ { "value": "0", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
-            "PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
-            "CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "ASSOCIATED_BUSIF": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "ASSOCIATED_PORT": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "ASSOCIATED_RESET": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
-            "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
-          },
-          "port_maps": {
-            "CLK_OUT2": [ { "physical_name": "clk_out2" } ]
-          }
-        }
-      }
-    }
-  }
-}

designs/reflectometer_base/Makefile

@@ -10,13 +10,21 @@
 FPGA_PART = xc7a100tfgg484-2
 FPGA_TOP = reflectometer_top
 FPGA_ARCH = artix7
+SIM_TOP = reflectometer_tb
 
 RTL_DIR = ../../rtl
 
 
 include ../../scripts/vivado.mk
 
+
+INC_FILES += interfaces.svh
+
+TB_FILES  += reflectometer_tb.sv
 SYN_FILES += reflectometer.sv
+SYN_FILES += dac_model.sv
+SYN_FILES += adc_model.sv
+SYN_FILES += reflectometer_tb.sv
 SYN_FILES += $(sort $(shell find ../../rtl -type f \( -name '*.v' -o -name '*.sv' \)))
 
 XCI_FILES = $(sort $(shell find ../../rtl/ethernet-udp/src -type f -name '*.xci'))

designs/reflectometer_base/README.md

@@ -0,0 +1,145 @@
+# Рефлектометр
+
+Модуль представляет собой законченную встраиваемую систему рефлектометра, объединяющую:
+
+- контроллер управления
+- генератор импульсов (DAC path)
+- сэмплер данных (ADC path)
+- аккумулятор и обработчик данных
+
+Система предназначена для формирования импульсов, синхронного сбора отраженного сигнала, накопления результатов и передачи обработанных данных во внешнюю систему.
+
+Данный модуль является полноценным интегрируемым блоком, который может использоваться как самостоятельная аппаратная подсистема внутри более крупного проекта.
+
+---
+
+## Назначение системы
+
+Основная задача системы:
+
+1. Получить параметры измерения через AXI Stream
+2. Сформировать последовательность импульсов на DAC
+3. Выполнить синходную выборку данных с ADC
+4. Накопить и обработать результаты
+5. Передать итоговые данные обратно через AXI Stream
+
+Таким образом реализуется полный цикл измерения без необходимости внешнего управления отдельными блоками.
+
+---
+
+## Состав системы
+
+### Controller
+
+Принимает входные команды по AXI Stream (Ethernet RX), декодирует параметры измерения и управляет всеми внутренними модулями системы.
+
+Формирует:
+
+- запуск генератора (`dac_start`)
+- запуск аккумулятора (`adc_start`)
+- параметры импульсов DAC
+- параметры выборки ADC
+- локальные reset-сигналы
+
+---
+
+### Generator
+
+Формирует последовательность импульсов на DAC с заданными:
+
+- амплитудой
+- длительностью
+- периодом
+- количеством повторений
+
+Для каждого импульса инициирует запуск выборки в сэмплере.
+
+---
+
+### Sampler
+
+Выполняет синхронный сбор данных с ADC по запросу генератора.
+
+Поддерживает:
+
+- фильтрацию `out_of_range`
+- упаковку данных
+- преобразование типа кода ( прямой или дополнительный)
+
+---
+
+### Accumulator
+
+Получает поток данных от сэмплера, выполняет накопление, усреднение и оконную обработку, после чего формирует пакеты для передачи результата.
+
+---
+
+## Управление системой
+
+Пользователь взаимодействует только с контроллером через AXI Stream-интерфейс.
+
+Прямое управление генератором, сэмплером и аккумулятором не требуется.
+
+---
+
+## Clock Domain Crossing (CDC)
+
+Система работает в нескольких тактовых доменах:
+
+- Ethernet RX (`gmii_rx_clk`)
+- Ethernet TX (`gmii_tx_clk`)
+- DAC (`dac_clk`)
+- ADC (`adc_clk`)
+
+Для корректной синхронизации между DAC и ADC используются специальные CDC-регистры для сигналов:
+
+- `sample_req`
+- `sample_done`
+
+Это обеспечивает безопасную передачу handshake-сигналов между тактовыми доменами.
+
+---
+
+## Список параметров
+
+### DAC_DATA_WIDTH
+Ширина выходных данных отправляемых на ЦАП.
+
+### ZERO_LEVEL
+Уровень сигнала в состоянии отсутствия импульса (базовый уровень сигнала).
+
+Типовые значения:
+
+- `8192` — середина диапазона ЦАП
+- `0` — нулевой уровень
+
+### ADC_DATA_WIDTH
+Ширина входных данных, получаемых с АЦП.
+
+### PACK_FACTOR
+Количество отсчетов, собираемых в один выходной пакет.
+
+### PROCESS_MODE
+Режим интерпретации входного кода:
+
+- `0` — прямой код
+- `1` — дополнительный код
+
+### ACCUM_WIDTH 
+Размер данных для аккумуляции, должен быть степенью числа 2. По умолчанию - 32
+
+### N_MAX 
+Максимальное число окон в последовательности. Должно быть степенью числа 2. Влияет на размер используемой памяти.
+
+### WINDOW_SIZE 
+Размер окна усреднения
+
+### PACKET_SIZE 
+Размер выходного пакета
+
+---
+
+## Сборка
+```make all``` - собрать все до битстрима
+
+```make vivado``` - открыть проект в Vivado

designs/reflectometer_base/adc_model.sv

@@ -0,0 +1,59 @@
+// AN9238 virtual ADC model (1 port)
+
+module virtual_adc_model #(
+    parameter int unsigned ADC_DATA_WIDTH = 12,
+
+    // Bipolar input range: +/- VOLTAGE_RANGE
+    parameter real VOLTAGE_RANGE = 1.0,
+
+    // Analog input correction
+    parameter real VOLTAGE_GAIN  = 0.2,
+    parameter real GROUND_BIAS   = 0.0,
+
+    // ADC timing parameters
+    parameter time CONVERSION_DELAY = 250ps
+)(
+    input  logic                         clk_i,
+    input  real                          voltage_i,
+
+    output logic                         otr_o,
+    output logic [ADC_DATA_WIDTH-1:0]    data_o
+);
+
+    localparam int unsigned ZERO_CODE = (1 << (ADC_DATA_WIDTH - 1));
+    localparam real VOLTAGE_STEP = (2 * VOLTAGE_RANGE) / real'((1 << ADC_DATA_WIDTH) - 1);
+
+    real voltage_corrected;
+
+    //------------------------------------------------------------
+    // Convert analog voltage to ADC code
+    //------------------------------------------------------------
+    function automatic logic [ADC_DATA_WIDTH-1:0] voltage_to_code( input real voltage );
+        if (voltage <= -VOLTAGE_RANGE) return '0;
+        if (voltage >=  VOLTAGE_RANGE) return {ADC_DATA_WIDTH{1'b1}};
+        return $rtoi(voltage / VOLTAGE_STEP + real'((ZERO_CODE)) + 0.5);
+    endfunction
+
+    function automatic logic range_check( input real voltage );
+        real v_abs = (voltage < 0.0) ? -voltage : voltage;
+        return v_abs >= VOLTAGE_RANGE;
+    endfunction
+
+    //------------------------------------------------------------
+    // Initial state
+    //------------------------------------------------------------
+    initial begin
+        data_o = ZERO_CODE; // 0V
+        otr_o  = 0;
+    end
+
+    //------------------------------------------------------------
+    // Update analog output
+    //------------------------------------------------------------
+    always @(posedge clk_i) begin
+        voltage_corrected = (voltage_i - GROUND_BIAS) * VOLTAGE_GAIN;
+        data_o  <= #(CONVERSION_DELAY) voltage_to_code(voltage_corrected);
+        otr_o   <= #(CONVERSION_DELAY) range_check(voltage_corrected);
+    end
+
+endmodule

designs/reflectometer_base/dac_model.sv

@@ -0,0 +1,58 @@
+// AN9767 model (1 port)
+
+module virtual_dac_model #(
+    parameter int unsigned DAC_DATA_WIDTH = 14,
+
+    // Bipolar output range: +/- VOLTAGE_RANGE
+    parameter real VOLTAGE_RANGE = 5.0,
+
+    // Analog output correction
+    parameter real VOLTAGE_GAIN  = 1.0,
+    parameter real GROUND_BIAS   = 0.0,
+
+    // DAC timing parameters
+    parameter time TRANSMISSION_DELAY = 150ps,
+    parameter time CONVERSION_DELAY   = 150ps
+)(
+    input  logic                      clk_i,
+    input  logic                      wrt_i,
+    input  logic [DAC_DATA_WIDTH-1:0] data_i,
+
+    output real                       voltage_o
+);
+
+    localparam int unsigned ZERO_CODE = (1 << (DAC_DATA_WIDTH - 1));
+    localparam real VOLTAGE_STEP = (2 * VOLTAGE_RANGE) / real'((1 << DAC_DATA_WIDTH) - 1);
+
+    logic [DAC_DATA_WIDTH-1:0] dac_code;
+
+    //------------------------------------------------------------
+    // Convert DAC code to analog voltage
+    //------------------------------------------------------------
+    function automatic real code_to_voltage( input logic [DAC_DATA_WIDTH-1:0] code);
+        return (int'(code) - int'(ZERO_CODE)) * VOLTAGE_STEP;
+    endfunction
+
+    //------------------------------------------------------------
+    // Initial state
+    //------------------------------------------------------------
+    initial begin
+        dac_code  = '0;
+        voltage_o = code_to_voltage('0) * VOLTAGE_GAIN + GROUND_BIAS;
+    end
+
+    //------------------------------------------------------------
+    // Latch new DAC code
+    //------------------------------------------------------------
+    always @(posedge wrt_i) begin
+        dac_code <= #(TRANSMISSION_DELAY) data_i;
+    end
+
+    //------------------------------------------------------------
+    // Update analog output
+    //------------------------------------------------------------
+    always @(posedge clk_i) begin
+        voltage_o <= #(CONVERSION_DELAY) code_to_voltage(dac_code) * VOLTAGE_GAIN + GROUND_BIAS;
+    end
+
+endmodule

designs/reflectometer_base/debug.xdc

@@ -1 +1,9 @@
-set_clock_groups -name ASYNC_UDP_CTRL -asynchronous -group [get_clocks rgmii_rxc] -group [get_clocks clk_out1_clk_wiz_ctrl_inst] -group [get_clocks clk_out2_clk_wiz_ctrl_inst]
+# Primary clocks
+create_clock -name ref_clock    -period 5.000  [get_ports clk_in]
+create_clock -name phy_rx_clock -period 8.000  [get_ports clk_m_axis]
+create_clock -name phy_tx_clock -period 8.000  [get_ports clk_s_axis]
+
+set clk_125_name [get_clocks -of_objects [get_pins generator_inst/clk_dac_125]]
+set clk_65_name  [get_clocks -of_objects [get_pins accumulator_top_dut/clk_adc_65]]
+
+set_clock_groups -asynchronous -group $clk_125_name -group $clk_65_name

designs/reflectometer_base/interfaces.svh

@@ -0,0 +1,130 @@
+`ifndef AXIS_INTERFACE_SVH
+`define AXIS_INTERFACE_SVH
+
+interface axis_if #(
+    parameter int DATA_WIDTH = 8
+)(
+    input logic clk,
+    input logic rst_n
+);
+
+    // Сигналы шины AXI-Stream
+    logic [DATA_WIDTH-1:0] tdata;
+    logic tvalid;
+    logic tlast;
+    logic tready;
+
+    initial begin // Default values
+        tdata  = 'x;
+        tvalid = 1'b0;
+        tlast  = 1'b0;
+        tready = 1'b0;
+    end
+
+    // Master Clocking Block (для отправки данных из TB)
+    clocking drv_cb @(posedge clk);
+        default input #1step output #100ps;
+        output tdata, tvalid, tlast;
+        input  tready;
+    endclocking
+
+    // Slave Clocking Block (для приема данных в TB с генерацией tready)
+    clocking slv_cb @(posedge clk);
+        default input #1step output #100ps;
+        input  tdata, tvalid, tlast;
+        output tready;
+    endclocking
+
+    // Passive Monitor Clocking Block
+    clocking mon_cb @(posedge clk);
+        default input #1step;
+        input tdata, tvalid, tlast, tready;
+    endclocking
+
+    modport master (output tdata, tvalid, tlast, input  tready);
+    modport slave  (input  tdata, tvalid, tlast, output tready);
+    
+    // Модпорт для тестбенча с тасками
+    modport tb (
+        clocking drv_cb,
+        clocking slv_cb,
+        clocking mon_cb,
+        import master_send,
+        import slave_recv,
+        import monitor_recv
+    );
+
+    // Отправка пакета (Тестбенч выступает как Master)
+    task automatic master_send(input logic [DATA_WIDTH-1:0] payload[]);
+        if (payload.size() == 0) return;
+
+        @(drv_cb);
+        
+        for (int i = 0; i < payload.size(); i++) begin
+            drv_cb.tdata  <= payload[i];
+            drv_cb.tvalid <= 1'b1;
+            drv_cb.tlast  <= (i == payload.size() - 1);
+        
+            forever begin // Ждем подтверждение от слейва пока не получим
+                @(drv_cb);
+                if (drv_cb.tready === 1'b1) begin
+                    break;
+                end
+            end
+        end
+        // Сбрасываем сигналы после отправки пакета
+        drv_cb.tvalid <= 1'b0;
+        drv_cb.tlast  <= 1'b0;
+        drv_cb.tdata  <= 'x;
+    endtask
+
+    // Прием пакета (Тестбенч выступает как Slave и управляет tready). Не применять если есть реальный Slave (его tready опустится насильно)
+    task automatic slave_recv(output logic [DATA_WIDTH-1:0] payload[]);
+        logic [DATA_WIDTH-1:0] local_queue[$]; // Внутри таски очередь использовать можно
+        
+        slv_cb.tready <= 1'b1; // Показываем, что готовы принимать
+        
+        forever begin
+            @(slv_cb);
+            if (slv_cb.tvalid === 1'b1) begin
+                local_queue.push_back(slv_cb.tdata);
+                if (slv_cb.tlast === 1'b1) begin
+                    break; // Пакет закончился
+                end
+            end
+        end
+        
+        slv_cb.tready <= 1'b0; // Снимаем готовность
+        
+        // Перекладываем из очереди в динамический массив
+        payload = new[local_queue.size()](local_queue);
+    endtask
+
+    // Прием пакета (Тестбенч выступает как пассивный наблюдатель без tready)
+    task automatic monitor_recv(output logic [DATA_WIDTH-1:0] payload[]);
+        logic [DATA_WIDTH-1:0] local_queue[$]; // Внутри таски очередь использовать можно
+        
+        forever begin
+            if (mon_cb.tready === 1'b1) begin
+                break; // Дождались слейва
+            end
+            @(slv_cb);
+        end
+        
+        forever begin
+            @(mon_cb);
+            if (mon_cb.tvalid === 1'b1) begin
+                local_queue.push_back(mon_cb.tdata);
+                if (mon_cb.tlast === 1'b1) begin
+                    break; // Пакет закончился
+                end
+            end
+        end
+        
+        // Перекладываем из очереди в динамический массив
+        payload = new[local_queue.size()](local_queue);
+    endtask
+
+endinterface
+
+`endif // AXIS_INTERFACE_SVH`

designs/reflectometer_base/ip/clk_wiz_ctrl_inst.xci

@@ -3,8 +3,8 @@
   "ip_inst": {
     "xci_name": "clk_wiz_ctrl_inst",
     "component_reference": "xilinx.com:ip:clk_wiz:6.0",
-    "ip_revision": "16",
+    "ip_revision": "17",
-    "gen_directory": "../../../../eth_generator_top.gen/sources_1/ip/clk_wiz_ctrl_inst",
+    "gen_directory": "../../../../reflectometer_top.gen/sources_1/ip/clk_wiz_ctrl_inst",
     "parameters": {
       "component_parameters": {
         "Component_Name": [ { "value": "clk_wiz_ctrl_inst", "resolve_type": "user", "usage": "all" } ],
@@ -31,7 +31,7 @@
         "USE_MIN_POWER": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "USE_DYN_PHASE_SHIFT": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "USE_DYN_RECONFIG": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "JITTER_SEL": [ { "value": "No_Jitter", "resolve_type": "user", "usage": "all" } ],
+        "JITTER_SEL": [ { "value": "Min_O_Jitter", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
         "PRIM_IN_FREQ": [ { "value": "200.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "PRIM_IN_TIMEPERIOD": [ { "value": "10.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "IN_FREQ_UNITS": [ { "value": "Units_MHz", "resolve_type": "user", "usage": "all" } ],
@@ -52,12 +52,12 @@
         "CLKIN2_JITTER_PS": [ { "value": "100.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "CLKOUT1_USED": [ { "value": "true", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "CLKOUT2_USED": [ { "value": "true", "value_src": "user", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT3_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT3_USED": [ { "value": "true", "value_src": "user", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "CLKOUT4_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "CLKOUT4_USED": [ { "value": "true", "value_src": "user", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "CLKOUT5_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "CLKOUT6_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "CLKOUT7_USED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "NUM_OUT_CLKS": [ { "value": "2", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "NUM_OUT_CLKS": [ { "value": "4", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
         "CLK_OUT1_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "CLK_OUT2_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "CLK_OUT3_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
@@ -65,11 +65,11 @@
         "CLK_OUT5_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "CLK_OUT6_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "CLK_OUT7_USE_FINE_PS_GUI": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "PRIMARY_PORT": [ { "value": "clk_in1", "resolve_type": "user", "usage": "all" } ],
+        "PRIMARY_PORT": [ { "value": "clk_200", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
-        "CLK_OUT1_PORT": [ { "value": "clk_out1", "resolve_type": "user", "usage": "all" } ],
+        "CLK_OUT1_PORT": [ { "value": "clk_adc_65", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
-        "CLK_OUT2_PORT": [ { "value": "clk_out2", "resolve_type": "user", "usage": "all" } ],
+        "CLK_OUT2_PORT": [ { "value": "clk_adc_65_180", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
-        "CLK_OUT3_PORT": [ { "value": "clk_out3", "resolve_type": "user", "usage": "all" } ],
+        "CLK_OUT3_PORT": [ { "value": "clk_dac_125", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
-        "CLK_OUT4_PORT": [ { "value": "clk_out4", "resolve_type": "user", "usage": "all" } ],
+        "CLK_OUT4_PORT": [ { "value": "clk_dac_125_180", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
         "CLK_OUT5_PORT": [ { "value": "clk_out5", "resolve_type": "user", "usage": "all" } ],
         "CLK_OUT6_PORT": [ { "value": "clk_out6", "resolve_type": "user", "usage": "all" } ],
         "CLK_OUT7_PORT": [ { "value": "clk_out7", "resolve_type": "user", "usage": "all" } ],
@@ -84,17 +84,17 @@
         "PSEN_PORT": [ { "value": "psen", "resolve_type": "user", "usage": "all" } ],
         "PSINCDEC_PORT": [ { "value": "psincdec", "resolve_type": "user", "usage": "all" } ],
         "PSDONE_PORT": [ { "value": "psdone", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT1_REQUESTED_OUT_FREQ": [ { "value": "125", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT1_REQUESTED_OUT_FREQ": [ { "value": "65", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "CLKOUT1_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "CLKOUT1_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT2_REQUESTED_OUT_FREQ": [ { "value": "65.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT2_REQUESTED_OUT_FREQ": [ { "value": "65", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT2_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT2_REQUESTED_PHASE": [ { "value": "180", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "CLKOUT2_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT3_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT3_REQUESTED_OUT_FREQ": [ { "value": "125", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "CLKOUT3_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "CLKOUT3_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT4_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT4_REQUESTED_OUT_FREQ": [ { "value": "125", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT4_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT4_REQUESTED_PHASE": [ { "value": "180", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "CLKOUT4_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "CLKOUT5_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "CLKOUT5_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
@@ -115,14 +115,14 @@
         "CLKOUT6_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "CLKOUT7_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "PRIM_SOURCE": [ { "value": "Single_ended_clock_capable_pin", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT1_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT1_DRIVES": [ { "value": "BUFGCE", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT2_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT2_DRIVES": [ { "value": "BUFGCE", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT3_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT3_DRIVES": [ { "value": "BUFGCE", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT4_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT4_DRIVES": [ { "value": "BUFGCE", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT5_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT5_DRIVES": [ { "value": "BUFGCE", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT6_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT6_DRIVES": [ { "value": "BUFGCE", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT7_DRIVES": [ { "value": "BUFG", "resolve_type": "user", "usage": "all" } ],
+        "CLKOUT7_DRIVES": [ { "value": "BUFGCE", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
-        "FEEDBACK_SOURCE": [ { "value": "FDBK_AUTO", "resolve_type": "user", "usage": "all" } ],
+        "FEEDBACK_SOURCE": [ { "value": "FDBK_AUTO", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
         "CLKFB_IN_SIGNALING": [ { "value": "SINGLE", "resolve_type": "user", "usage": "all" } ],
         "CLKFB_IN_PORT": [ { "value": "clkfb_in", "resolve_type": "user", "usage": "all" } ],
         "CLKFB_IN_P_PORT": [ { "value": "clkfb_in_p", "resolve_type": "user", "usage": "all" } ],
@@ -141,7 +141,7 @@
         "USE_CLK_VALID": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "USE_INCLK_STOPPED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "USE_CLKFB_STOPPED": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "RESET_PORT": [ { "value": "reset", "resolve_type": "user", "usage": "all" } ],
+        "RESET_PORT": [ { "value": "resetn", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
         "LOCKED_PORT": [ { "value": "locked", "resolve_type": "user", "usage": "all" } ],
         "POWER_DOWN_PORT": [ { "value": "power_down", "resolve_type": "user", "usage": "all" } ],
         "CLK_VALID_PORT": [ { "value": "CLK_VALID", "resolve_type": "user", "usage": "all" } ],
@@ -154,34 +154,34 @@
         "SS_MOD_TIME": [ { "value": "0.004", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "OVERRIDE_MMCM": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "MMCM_NOTES": [ { "value": "None", "resolve_type": "user", "usage": "all" } ],
-        "MMCM_DIVCLK_DIVIDE": [ { "value": "4", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_DIVCLK_DIVIDE": [ { "value": "5", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
-        "MMCM_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "user", "usage": "all" } ],
+        "MMCM_BANDWIDTH": [ { "value": "HIGH", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
-        "MMCM_CLKFBOUT_MULT_F": [ { "value": "16.875", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKFBOUT_MULT_F": [ { "value": "34.125", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_CLKFBOUT_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "MMCM_CLKIN1_PERIOD": [ { "value": "5.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKIN2_PERIOD": [ { "value": "10.0", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKIN2_PERIOD": [ { "value": "10.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_CLKOUT4_CASCADE": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "MMCM_CLOCK_HOLD": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "MMCM_COMPENSATION": [ { "value": "ZHOLD", "resolve_type": "user", "usage": "all" } ],
         "MMCM_REF_JITTER1": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_REF_JITTER2": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_STARTUP_WAIT": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT0_DIVIDE_F": [ { "value": "6.750", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT0_DIVIDE_F": [ { "value": "21.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_CLKOUT0_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_CLKOUT0_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT1_DIVIDE": [ { "value": "13", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_CLKOUT1_DIVIDE": [ { "value": "21", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
         "MMCM_CLKOUT1_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT1_PHASE": [ { "value": "180.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_CLKOUT1_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_CLKOUT2_DIVIDE": [ { "value": "11", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
         "MMCM_CLKOUT2_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_CLKOUT2_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_CLKOUT3_DIVIDE": [ { "value": "11", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
         "MMCM_CLKOUT3_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "MMCM_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT3_PHASE": [ { "value": "180.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_CLKOUT3_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "MMCM_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
         "MMCM_CLKOUT4_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
@@ -223,8 +223,8 @@
         "PLL_CLKOUT5_DIVIDE": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
         "PLL_CLKOUT5_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "PLL_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "RESET_TYPE": [ { "value": "ACTIVE_HIGH", "resolve_type": "user", "usage": "all" } ],
+        "RESET_TYPE": [ { "value": "ACTIVE_LOW", "value_src": "user", "resolve_type": "user", "usage": "all" } ],
-        "USE_SAFE_CLOCK_STARTUP": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
+        "USE_SAFE_CLOCK_STARTUP": [ { "value": "true", "value_src": "user", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "USE_CLOCK_SEQUENCING": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "CLKOUT1_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
         "CLKOUT2_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "user", "format": "long", "usage": "all" } ],
@@ -245,14 +245,14 @@
         "CDDCREQ_PORT": [ { "value": "cddcreq", "resolve_type": "user", "usage": "all" } ],
         "ENABLE_CLKOUTPHY": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "CLKOUTPHY_REQUESTED_FREQ": [ { "value": "600.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT1_JITTER": [ { "value": "162.582", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT1_JITTER": [ { "value": "137.256", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT1_PHASE_ERROR": [ { "value": "137.238", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT1_PHASE_ERROR": [ { "value": "148.044", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT2_JITTER": [ { "value": "185.296", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT2_JITTER": [ { "value": "137.256", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT2_PHASE_ERROR": [ { "value": "137.238", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT2_PHASE_ERROR": [ { "value": "148.044", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT3_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT3_JITTER": [ { "value": "123.850", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT3_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT3_PHASE_ERROR": [ { "value": "148.044", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT4_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT4_JITTER": [ { "value": "123.850", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT4_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT4_PHASE_ERROR": [ { "value": "148.044", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "CLKOUT5_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "CLKOUT5_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "CLKOUT6_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
@@ -280,8 +280,8 @@
         "C_Enable_PLL1": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_REF_CLK_FREQ": [ { "value": "100.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_PRECISION": [ { "value": "1", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT3_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT3_USED": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT4_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_CLKOUT4_USED": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_CLKOUT5_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_CLKOUT6_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_CLKOUT7_USED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
@@ -295,9 +295,9 @@
         "C_USE_PHASE_ALIGNMENT": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_PRIM_IN_JITTER": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_SECONDARY_IN_JITTER": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_JITTER_SEL": [ { "value": "No_Jitter", "resolve_type": "generated", "usage": "all" } ],
+        "C_JITTER_SEL": [ { "value": "Min_O_Jitter", "resolve_type": "generated", "usage": "all" } ],
         "C_USE_MIN_POWER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_USE_MIN_O_JITTER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_MIN_O_JITTER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_USE_MAX_I_JITTER": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_USE_DYN_PHASE_SHIFT": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_OPTIMIZE_CLOCKING_STRUCTURE_EN": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
@@ -318,44 +318,44 @@
         "C_SECONDARY_SOURCE": [ { "value": "Single_ended_clock_capable_pin", "resolve_type": "generated", "usage": "all" } ],
         "C_CLKFB_IN_SIGNALING": [ { "value": "SINGLE", "resolve_type": "generated", "usage": "all" } ],
         "C_USE_RESET": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_RESET_LOW": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_RESET_LOW": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_USE_LOCKED": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_USE_INCLK_STOPPED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_USE_CLKFB_STOPPED": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_USE_POWER_DOWN": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_USE_STATUS": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_USE_FREEZE": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_NUM_OUT_CLKS": [ { "value": "2", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_NUM_OUT_CLKS": [ { "value": "4", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_CLKOUT1_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT1_DRIVES": [ { "value": "BUFGCE", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT2_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT2_DRIVES": [ { "value": "BUFGCE", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT3_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT3_DRIVES": [ { "value": "BUFGCE", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT4_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT4_DRIVES": [ { "value": "BUFGCE", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT5_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT5_DRIVES": [ { "value": "BUFGCE", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT6_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT6_DRIVES": [ { "value": "BUFGCE", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT7_DRIVES": [ { "value": "BUFG", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT7_DRIVES": [ { "value": "BUFGCE", "resolve_type": "generated", "usage": "all" } ],
         "C_INCLK_SUM_ROW0": [ { "value": "Input Clock   Freq (MHz)    Input Jitter (UI)", "resolve_type": "generated", "usage": "all" } ],
         "C_INCLK_SUM_ROW1": [ { "value": "__primary_________200.000____________0.010", "resolve_type": "generated", "usage": "all" } ],
         "C_INCLK_SUM_ROW2": [ { "value": "no_secondary_input_clock ", "resolve_type": "generated", "usage": "all" } ],
         "C_OUTCLK_SUM_ROW0A": [ { "value": " Output     Output      Phase    Duty Cycle   Pk-to-Pk     Phase", "resolve_type": "generated", "usage": "all" } ],
         "C_OUTCLK_SUM_ROW0B": [ { "value": "  Clock     Freq (MHz)  (degrees)    (%)     Jitter (ps)  Error (ps)", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW1": [ { "value": "clk_out1__125.00000______0.000______50.0______162.582____137.238", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW1": [ { "value": "clk_adc_65__65.00000______0.000______50.0______137.256____148.044", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW2": [ { "value": "clk_out2__64.90385______0.000______50.0______185.296____137.238", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW2": [ { "value": "clk_adc_65_180__65.00000____180.000______50.0______137.256____148.044", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW3": [ { "value": "no_CLK_OUT3_output", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW3": [ { "value": "clk_dac_125__124.09091______0.000______50.0______123.850____148.044", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW4": [ { "value": "no_CLK_OUT4_output", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW4": [ { "value": "clk_dac_125_180__124.09091____180.000______50.0______123.850____148.044", "resolve_type": "generated", "usage": "all" } ],
         "C_OUTCLK_SUM_ROW5": [ { "value": "no_CLK_OUT5_output", "resolve_type": "generated", "usage": "all" } ],
         "C_OUTCLK_SUM_ROW6": [ { "value": "no_CLK_OUT6_output", "resolve_type": "generated", "usage": "all" } ],
         "C_OUTCLK_SUM_ROW7": [ { "value": "no_CLK_OUT7_output", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT1_REQUESTED_OUT_FREQ": [ { "value": "125", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT1_REQUESTED_OUT_FREQ": [ { "value": "65", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT2_REQUESTED_OUT_FREQ": [ { "value": "65.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT2_REQUESTED_OUT_FREQ": [ { "value": "65", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT3_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT3_REQUESTED_OUT_FREQ": [ { "value": "125", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT4_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT4_REQUESTED_OUT_FREQ": [ { "value": "125", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT5_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT6_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT7_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT1_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT2_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT2_REQUESTED_PHASE": [ { "value": "180", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT3_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT4_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT4_REQUESTED_PHASE": [ { "value": "180", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT5_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT6_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT7_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
@@ -366,28 +366,28 @@
         "C_CLKOUT5_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT6_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT7_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT1_OUT_FREQ": [ { "value": "125.00000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT1_OUT_FREQ": [ { "value": "65.00000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT2_OUT_FREQ": [ { "value": "64.90385", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT2_OUT_FREQ": [ { "value": "65.00000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT3_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT3_OUT_FREQ": [ { "value": "124.09091", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT4_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT4_OUT_FREQ": [ { "value": "124.09091", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT5_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT6_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT7_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT2_PHASE": [ { "value": "180.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT4_PHASE": [ { "value": "180.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT6_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT7_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT1_DUTY_CYCLE": [ { "value": "50.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT2_DUTY_CYCLE": [ { "value": "50.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT3_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT3_DUTY_CYCLE": [ { "value": "50.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT4_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT4_DUTY_CYCLE": [ { "value": "50.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT5_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT6_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT7_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_USE_SAFE_CLOCK_STARTUP": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_USE_SAFE_CLOCK_STARTUP": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_USE_CLOCK_SEQUENCING": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_CLKOUT1_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_CLKOUT2_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
@@ -397,21 +397,21 @@
         "C_CLKOUT6_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_CLKOUT7_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_MMCM_NOTES": [ { "value": "None", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "generated", "usage": "all" } ],
+        "C_MMCM_BANDWIDTH": [ { "value": "HIGH", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKFBOUT_MULT_F": [ { "value": "16.875", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKFBOUT_MULT_F": [ { "value": "34.125", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_MMCM_CLKIN1_PERIOD": [ { "value": "5.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKIN2_PERIOD": [ { "value": "10.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKIN2_PERIOD": [ { "value": "10.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_MMCM_CLKOUT4_CASCADE": [ { "value": "FALSE", "resolve_type": "generated", "format": "bool", "usage": "all" } ],
         "C_MMCM_CLOCK_HOLD": [ { "value": "FALSE", "resolve_type": "generated", "format": "bool", "usage": "all" } ],
         "C_MMCM_COMPENSATION": [ { "value": "ZHOLD", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_DIVCLK_DIVIDE": [ { "value": "4", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_DIVCLK_DIVIDE": [ { "value": "5", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_MMCM_REF_JITTER1": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_MMCM_REF_JITTER2": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_MMCM_STARTUP_WAIT": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKOUT0_DIVIDE_F": [ { "value": "6.750", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT0_DIVIDE_F": [ { "value": "21.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT1_DIVIDE": [ { "value": "13", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_CLKOUT1_DIVIDE": [ { "value": "21", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_MMCM_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_CLKOUT2_DIVIDE": [ { "value": "11", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_MMCM_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_CLKOUT3_DIVIDE": [ { "value": "11", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_MMCM_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_MMCM_CLKOUT5_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_MMCM_CLKOUT6_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
@@ -424,9 +424,9 @@
         "C_MMCM_CLKOUT6_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_MMCM_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_MMCM_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT1_PHASE": [ { "value": "180.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_MMCM_CLKOUT2_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT3_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT3_PHASE": [ { "value": "180.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_MMCM_CLKOUT4_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_MMCM_CLKOUT5_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_MMCM_CLKOUT6_PHASE": [ { "value": "0.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
@@ -468,16 +468,16 @@
         "C_CLOCK_MGR_TYPE": [ { "value": "NA", "resolve_type": "generated", "usage": "all" } ],
         "C_OVERRIDE_MMCM": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_OVERRIDE_PLL": [ { "value": "0", "resolve_type": "generated", "format": "long", "usage": "all" } ],
-        "C_PRIMARY_PORT": [ { "value": "clk_in1", "resolve_type": "generated", "usage": "all" } ],
+        "C_PRIMARY_PORT": [ { "value": "clk_200", "resolve_type": "generated", "usage": "all" } ],
         "C_SECONDARY_PORT": [ { "value": "clk_in2", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_OUT1_PORT": [ { "value": "clk_out1", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_OUT1_PORT": [ { "value": "clk_adc_65", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_OUT2_PORT": [ { "value": "clk_out2", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_OUT2_PORT": [ { "value": "clk_adc_65_180", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_OUT3_PORT": [ { "value": "clk_out3", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_OUT3_PORT": [ { "value": "clk_dac_125", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLK_OUT4_PORT": [ { "value": "clk_out4", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLK_OUT4_PORT": [ { "value": "clk_dac_125_180", "resolve_type": "generated", "usage": "all" } ],
         "C_CLK_OUT5_PORT": [ { "value": "clk_out5", "resolve_type": "generated", "usage": "all" } ],
         "C_CLK_OUT6_PORT": [ { "value": "clk_out6", "resolve_type": "generated", "usage": "all" } ],
         "C_CLK_OUT7_PORT": [ { "value": "clk_out7", "resolve_type": "generated", "usage": "all" } ],
-        "C_RESET_PORT": [ { "value": "reset", "resolve_type": "generated", "usage": "all" } ],
+        "C_RESET_PORT": [ { "value": "resetn", "resolve_type": "generated", "usage": "all" } ],
         "C_LOCKED_PORT": [ { "value": "locked", "resolve_type": "generated", "usage": "all" } ],
         "C_CLKFB_IN_PORT": [ { "value": "clkfb_in", "resolve_type": "generated", "usage": "all" } ],
         "C_CLKFB_IN_P_PORT": [ { "value": "clkfb_in_p", "resolve_type": "generated", "usage": "all" } ],
@@ -540,12 +540,12 @@
         "C_FILTER_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
         "C_FILTER_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
         "C_DIVIDE1_AUTO": [ { "value": "1", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE2_AUTO": [ { "value": "1.9259259259259258", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE2_AUTO": [ { "value": "1.0", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE3_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE3_AUTO": [ { "value": "0.5238095238095238", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE4_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE4_AUTO": [ { "value": "0.5238095238095238", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE5_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE5_AUTO": [ { "value": "0.047619047619047616", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE6_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE6_AUTO": [ { "value": "0.047619047619047616", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE7_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE7_AUTO": [ { "value": "0.047619047619047616", "resolve_type": "generated", "usage": "all" } ],
         "C_PLLBUFGCEDIV": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
         "C_MMCMBUFGCEDIV": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
         "C_PLLBUFGCEDIV1": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
@@ -566,66 +566,68 @@
         "C_CLKOUT5_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
         "C_CLKOUT6_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
         "C_CLKOUT7_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT0_ACTUAL_FREQ": [ { "value": "125.00000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT0_ACTUAL_FREQ": [ { "value": "65.00000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT1_ACTUAL_FREQ": [ { "value": "64.90385", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT1_ACTUAL_FREQ": [ { "value": "65.00000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT2_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT2_ACTUAL_FREQ": [ { "value": "124.09091", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT3_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT3_ACTUAL_FREQ": [ { "value": "124.09091", "resolve_type": "generated", "usage": "all" } ],
         "C_CLKOUT4_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
         "C_CLKOUT5_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
         "C_CLKOUT6_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
         "C_M_MAX": [ { "value": "64.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_M_MIN": [ { "value": "2.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_D_MAX": [ { "value": "80.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_D_MAX": [ { "value": "93.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_D_MIN": [ { "value": "1.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_O_MAX": [ { "value": "128.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_O_MIN": [ { "value": "1.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_VCO_MIN": [ { "value": "600.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_VCO_MAX": [ { "value": "1200.000", "resolve_type": "generated", "format": "float", "usage": "all" } ]
+        "C_VCO_MAX": [ { "value": "1440.000", "resolve_type": "generated", "format": "float", "usage": "all" } ]
       },
       "project_parameters": {
-        "ARCHITECTURE": [ { "value": "artix7" } ],
+        "ARCHITECTURE": [ { "value": "artix7", "resolve_type": "generated", "usage": "all" } ],
-        "BASE_BOARD_PART": [ { "value": "" } ],
+        "BASE_BOARD_PART": [ { "value": "", "resolve_type": "generated", "usage": "all" } ],
-        "BOARD_CONNECTIONS": [ { "value": "" } ],
+        "BOARD_CONNECTIONS": [ { "value": "", "resolve_type": "generated", "usage": "all" } ],
-        "DEVICE": [ { "value": "xc7a35t" } ],
+        "DEVICE": [ { "value": "xc7a100t", "resolve_type": "generated", "usage": "all" } ],
-        "PACKAGE": [ { "value": "fgg484" } ],
+        "PACKAGE": [ { "value": "fgg484", "resolve_type": "generated", "usage": "all" } ],
-        "PREFHDL": [ { "value": "VERILOG" } ],
+        "PREFHDL": [ { "value": "VERILOG", "resolve_type": "generated", "usage": "all" } ],
-        "SILICON_REVISION": [ { "value": "" } ],
+        "SILICON_REVISION": [ { "value": "", "resolve_type": "generated", "usage": "all" } ],
-        "SIMULATOR_LANGUAGE": [ { "value": "MIXED" } ],
+        "SIMULATOR_LANGUAGE": [ { "value": "MIXED", "resolve_type": "generated", "usage": "all" } ],
-        "SPEEDGRADE": [ { "value": "-1" } ],
+        "SPEEDGRADE": [ { "value": "-2", "resolve_type": "generated", "usage": "all" } ],
-        "STATIC_POWER": [ { "value": "" } ],
+        "STATIC_POWER": [ { "value": "", "resolve_type": "generated", "usage": "all" } ],
-        "TEMPERATURE_GRADE": [ { "value": "" } ]
+        "TEMPERATURE_GRADE": [ { "value": "", "resolve_type": "generated", "usage": "all" } ]
       },
       "runtime_parameters": {
         "IPCONTEXT": [ { "value": "IP_Flow" } ],
-        "IPREVISION": [ { "value": "16" } ],
+        "IPREVISION": [ { "value": "17" } ],
         "MANAGED": [ { "value": "TRUE" } ],
-        "OUTPUTDIR": [ { "value": "../../../../eth_generator_top.gen/sources_1/ip/clk_wiz_ctrl_inst" } ],
+        "OUTPUTDIR": [ { "value": "../../../../reflectometer_top.gen/sources_1/ip/clk_wiz_ctrl_inst" } ],
         "SELECTEDSIMMODEL": [ { "value": "" } ],
         "SHAREDDIR": [ { "value": "." } ],
-        "SWVERSION": [ { "value": "2025.1" } ],
+        "SWVERSION": [ { "value": "2025.2" } ],
         "SYNTHESISFLOW": [ { "value": "OUT_OF_CONTEXT" } ]
       }
     },
     "boundary": {
       "ports": {
-        "reset": [ { "direction": "in", "driver_value": "0" } ],
+        "resetn": [ { "direction": "in", "driver_value": "0" } ],
-        "clk_in1": [ { "direction": "in" } ],
+        "clk_200": [ { "direction": "in" } ],
-        "clk_out1": [ { "direction": "out" } ],
+        "clk_adc_65": [ { "direction": "out" } ],
-        "clk_out2": [ { "direction": "out" } ],
+        "clk_adc_65_180": [ { "direction": "out" } ],
+        "clk_dac_125": [ { "direction": "out" } ],
+        "clk_dac_125_180": [ { "direction": "out" } ],
         "locked": [ { "direction": "out" } ]
       },
       "interfaces": {
-        "reset": {
+        "resetn": {
           "vlnv": "xilinx.com:signal:reset:1.0",
           "abstraction_type": "xilinx.com:signal:reset_rtl:1.0",
           "mode": "slave",
           "parameters": {
-            "POLARITY": [ { "value": "ACTIVE_HIGH", "value_src": "constant", "usage": "all" } ],
+            "POLARITY": [ { "value": "ACTIVE_LOW", "value_src": "constant", "usage": "all" } ],
             "BOARD.ASSOCIATED_PARAM": [ { "value": "RESET_BOARD_INTERFACE", "value_src": "constant", "usage": "all" } ],
             "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
           },
           "port_maps": {
-            "RST": [ { "physical_name": "reset" } ]
+            "RST": [ { "physical_name": "resetn" } ]
           }
         },
         "clock_CLK_IN1": {
@@ -644,7 +646,7 @@
             "BOARD.ASSOCIATED_PARAM": [ { "value": "CLK_IN1_BOARD_INTERFACE", "usage": "all", "is_static_object": false } ]
           },
           "port_maps": {
-            "CLK_IN1": [ { "physical_name": "clk_in1" } ]
+            "CLK_IN1": [ { "physical_name": "clk_200" } ]
           }
         },
         "clock_CLK_OUT1": {
@@ -662,7 +664,7 @@
             "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
           },
           "port_maps": {
-            "CLK_OUT1": [ { "physical_name": "clk_out1" } ]
+            "CLK_OUT1": [ { "physical_name": "clk_adc_65" } ]
           }
         },
         "clock_CLK_OUT2": {
@@ -680,10 +682,47 @@
             "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
           },
           "port_maps": {
-            "CLK_OUT2": [ { "physical_name": "clk_out2" } ]
+            "CLK_OUT2": [ { "physical_name": "clk_adc_65_180" } ]
+          }
+        },
+        "clock_CLK_OUT3": {
+          "vlnv": "xilinx.com:signal:clock:1.0",
+          "abstraction_type": "xilinx.com:signal:clock_rtl:1.0",
+          "mode": "master",
+          "parameters": {
+            "FREQ_HZ": [ { "value": "100000000", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
+            "FREQ_TOLERANCE_HZ": [ { "value": "0", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
+            "PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
+            "CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_BUSIF": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_PORT": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_RESET": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
+          },
+          "port_maps": {
+            "CLK_OUT3": [ { "physical_name": "clk_dac_125" } ]
+          }
+        },
+        "clock_CLK_OUT4": {
+          "vlnv": "xilinx.com:signal:clock:1.0",
+          "abstraction_type": "xilinx.com:signal:clock_rtl:1.0",
+          "mode": "master",
+          "parameters": {
+            "FREQ_HZ": [ { "value": "100000000", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
+            "FREQ_TOLERANCE_HZ": [ { "value": "0", "resolve_type": "generated", "format": "long", "is_ips_inferred": true, "is_static_object": false } ],
+            "PHASE": [ { "value": "0.0", "resolve_type": "generated", "format": "float", "is_ips_inferred": true, "is_static_object": false } ],
+            "CLK_DOMAIN": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_BUSIF": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_PORT": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "ASSOCIATED_RESET": [ { "value": "", "resolve_type": "generated", "is_ips_inferred": true, "is_static_object": false } ],
+            "INSERT_VIP": [ { "value": "0", "resolve_type": "user", "format": "long", "usage": "simulation.rtl", "is_ips_inferred": true, "is_static_object": false } ]
+          },
+          "port_maps": {
+            "CLK_OUT4": [ { "physical_name": "clk_dac_125_180" } ]
           }
         }
       }
     }
-  }
+  },
+  "checksum": "3ec15bbf"
 }

designs/reflectometer_base/reflectometer.sv

@@ -1,127 +1,111 @@
 `timescale 1 ns / 1 ns
 
+`include "interfaces.svh"
+
 module reflectometer_top #(
     parameter int unsigned DAC_DATA_WIDTH = 14,
     parameter int unsigned ADC_DATA_WIDTH = 12,
-    parameter PACK_FACTOR = 1,
+    parameter int unsigned PACK_FACTOR = 1,
-    parameter PROCESS_MODE = 0,
+    parameter int unsigned PROCESS_MODE = 0,
-    parameter ACCUM_WIDTH = 32,
+    parameter int unsigned ZERO_LEVEL = 8192,
-    parameter N_MAX = 4096,
+    parameter int unsigned ACCUM_WIDTH = 32,
-    parameter WINDOW_SIZE = 65,
+    parameter int unsigned N_MAX = 4096,
-    parameter PACKET_SIZE = 1024
+    parameter int unsigned WINDOW_SIZE = 65,
+    parameter int unsigned PACKET_SIZE = 1024
 )(
-    input               sys_clk,
+    input   wire        clk_in,
-    input               rst_n,
+    input   wire        rst_n,
+    output  wire        locked,
 
-    output [3:0]        led,
+    // Accumulator AXI-S bus
+    input wire      clk_axis_accumulator, //  GMII PHY RX clock
+    axis_if.master  axis_accumulator,
 
-    input gmii_rx_clk,
+    // Control AXI-S bus
-    input gmii_tx_clk,
+    input wire      clk_axis_control, //  GMII PHY TX clock
+    axis_if.slave   axis_control,
 
-    (* MARK_DEBUG="true" *) output logic [7:0]  s_axis_tx_tdata,
+    // RTL-MAC handshake
-    (* MARK_DEBUG="true" *) output logic        s_axis_tx_tvalid,
+    input   wire        request_ready,
-    (* MARK_DEBUG="true" *) input  logic        s_axis_tx_tready,
+    output  wire        send_request,
-    (* MARK_DEBUG="true" *) output logic        s_axis_tx_tlast,
-
-    (* MARK_DEBUG="true" *) input  wire [7:0]  m_axis_rx_tdata,
-    (* MARK_DEBUG="true" *) input  wire        m_axis_rx_tvalid,
-    (* MARK_DEBUG="true" *) input  wire        m_axis_rx_tlast,
-    (* MARK_DEBUG="true" *) output wire        m_axis_rx_tready,
-
-    // axis_mac
-
-    (* MARK_DEBUG="true" *) input logic       req_ready,
-    (* MARK_DEBUG="true" *) output logic       send_req,
 
     // DAC
-
+    output  wire                        dac_clk_o,
-    output wire p2_clk,
+    output  wire [DAC_DATA_WIDTH-1:0]   dac_data,
-    (* MARK_DEBUG="true" *) output     wire [DAC_DATA_WIDTH-1:0]       p2_data,
+    output  wire                        dac_wrt,
-    (* MARK_DEBUG="true" *) output     wire p2_wrt,
 
     // ADC
-    output ch2_clk,
+    output  wire                        adc_clk_o,
-    (* MARK_DEBUG="true" *) input [ADC_DATA_WIDTH-1:0] ch2_data,
+    input   wire [ADC_DATA_WIDTH-1:0]   adc_data,
-    input ch2_otr
+    input   wire                        adc_otr
 
 );
 
-    // -------------------------------------------------------------------------
-    // IDELAYCTRL
-    // -------------------------------------------------------------------------
-    (* IODELAY_GROUP = "rgmii_idelay_group" *)
-    IDELAYCTRL IDELAYCTRL_inst (
-        .RDY    (),
-        .REFCLK (sys_clk),
-        .RST    (1'b0)
-    );
-
     // -------------------------------------------------------------------------
     // Generated clocks for controller
     // Need to create this IP in Vivado:
-    //  input : 200 MHz
+    //  input  resetn
-    //  output0: 130 MHz
+    //  input  clk_200          : 200 MHz                  : Reference clock
-    //  output1: 65 MHz
+    //  output clk_adc_65       : 65 MHz                   : ADC RTL clock
+    //  output clk_adc_65_180   : 65 MHz, phase 180 deg.   : ADC PHY clock
+    //  output clk_adc_125      : 125 MHz                  : DAC RTL clock
+    //  output clk_adc_125_180  : 125 MHz, phase 180 deg.  : DAC PHY clock
+    //  output locked
     // -------------------------------------------------------------------------
-    wire dac_clk;
+    wire clk_sampler, clk_generator, clk_locked;
-    wire adc_clk;
-    wire clk_wiz_locked;
 
-    clk_wiz_ctrl_inst clk_wiz_ctrl_inst (
+    clk_wiz_ctrl_inst clk_wiz_inst
-        .clk_in1   (sys_clk),
+    (
-        .reset    (~rst_n),
+        // Clock in ports
-        .clk_out1  (dac_clk),   // 130 MHz
+        .clk_200(clk_in),
-        .clk_out2  (adc_clk),   // 65 MHz
+        // Clock out ports  
-        .locked    (clk_wiz_locked)
+        .clk_adc_65(clk_sampler),
+        .clk_adc_65_180(adc_clk_o),
+        .clk_dac_125(clk_generator),
+        .clk_dac_125_180(dac_clk_o),
+        // Status and control signals               
+        .resetn(rst_n), 
+        .locked(clk_locked)
     );
 
-    // -------------------------------------------------------------------------
+    assign locked = clk_locked;
-    // axis_mac interface
-    // RX stream from Ethernet goes into controller
-    // TX stream is unused for now
-    // -------------------------------------------------------------------------
-
 
     // -------------------------------------------------------------------------
     // Controller reset
     // Use both external reset and clk_wiz lock
     // -------------------------------------------------------------------------
-    wire ctrl_rst_n = rst_n & clk_wiz_locked;
+    wire ctrl_rst_n = rst_n & clk_locked;
-
-
-    (* MARK_DEBUG="true" *) logic        finish;
-
-    // Controller outputs to debug
-    (* MARK_DEBUG="true" *) wire [31:0]               dac_pulse_width;
-    (* MARK_DEBUG="true" *) wire [31:0]               dac_pulse_period;
-    (* MARK_DEBUG="true" *) wire [DAC_DATA_WIDTH-1:0] dac_pulse_height;
-    (* MARK_DEBUG="true" *) wire [15:0]               dac_pulse_num;
-
-    (* MARK_DEBUG="true" *) wire [31:0]               adc_pulse_period;
-    (* MARK_DEBUG="true" *) wire [15:0]               adc_pulse_num;
-
-    (* MARK_DEBUG="true" *) wire                      dac_start;
-    (* MARK_DEBUG="true" *) wire                      adc_start;
-    (* MARK_DEBUG="true" *) wire                      dac_rst;
-    (* MARK_DEBUG="true" *) wire                      adc_rst;
-
 
     // -------------------------------------------------------------------------
     // Controller
-    // ETH domain = gmii_rx_clk, because RX AXI master comes from axis_mac RX side
     // -------------------------------------------------------------------------
+    wire [31:0]               dac_pulse_width;
+    wire [31:0]               dac_pulse_period;
+    wire [DAC_DATA_WIDTH-1:0] dac_pulse_height;
+    wire [15:0]               dac_pulse_num;
+
+    wire [31:0]               adc_pulse_period;
+    wire [15:0]               adc_pulse_num;
+
+    wire                      dac_start;
+    wire                      adc_start;
+    wire                      dac_rst;
+    wire                      adc_rst;
+
+    wire finish;
+
     control #(
         .DAC_DATA_WIDTH(DAC_DATA_WIDTH)
     ) udp_ctrl_inst (
-        .eth_clk_in        (gmii_rx_clk),
+        .eth_clk_in        (clk_axis_control),
-        .dac_clk_in        (dac_clk),
+        .dac_clk_in        (clk_generator),
-        .adc_clk_in        (adc_clk),
+        .adc_clk_in        (clk_sampler),
         .rst_n             (ctrl_rst_n),
 
-        .s_axis_tdata      (m_axis_rx_tdata),
+        .s_axis_tdata      (axis_control.tdata),
-        .s_axis_tvalid     (m_axis_rx_tvalid),
+        .s_axis_tvalid     (axis_control.tvalid),
-        .s_axis_tready     (m_axis_rx_tready),
+        .s_axis_tready     (axis_control.tready),
-        .s_axis_tlast      (m_axis_rx_tlast),
+        .s_axis_tlast      (axis_control.tlast),
 
         .finish            (finish),
 
@@ -140,179 +124,122 @@ module reflectometer_top #(
         .adc_rst           (adc_rst)
     );
 
-    // -------------------------------------------------------------------------
+    //------------------------------------------------------------
-    // DAC
-    // -------------------------------------------------------------------------
-
-   (* MARK_DEBUG="true" *) logic sample_req;
-   (* MARK_DEBUG="true" *) logic sample_req_sync1;
-   (* MARK_DEBUG="true" *) logic sample_req_sync2;
-   (* MARK_DEBUG="true" *) logic sample_req_sync3;
-
-   (* MARK_DEBUG="true" *) logic sample_done;
-   (* MARK_DEBUG="true" *) logic sample_done_sync1;
-   (* MARK_DEBUG="true" *) logic sample_done_sync2;
-   (* MARK_DEBUG="true" *) logic sample_done_sync3;
-
-   //------------------------------------------------------------
     // DAC -> ADC CDC
     //------------------------------------------------------------
-    always_ff @(posedge adc_clk or posedge adc_rst) begin
+    (* ASYNC_REG = "TRUE" *)    logic [2:0] stretch;    // 125/65~=2. Чтобы поймать единичный импульс, растянем его во времени
-        if (adc_rst) begin
+    (* ASYNC_REG = "TRUE" *)    logic [1:0] sync_DA;
-            sample_req <= 1'b0;
+                                wire        dac_done_stretched;
-            sample_req_sync2  <= 1'b0;
+
-            sample_req_sync3 <= 1'b0;
+    wire generator_done, generator_request;
-        end
+    wire sampler_done, sampler_request;
+    
+    always_ff @(posedge clk_generator or posedge dac_rst)
+    begin
+        if (dac_rst)
+            stretch <= 0;
         else begin
-            sample_req_sync2 <= sample_req_sync1;
+            stretch[0] <= generator_done;
-            sample_req_sync3  <= sample_req_sync2;
+            stretch[1] <= stretch[0];
-            sample_req <= sample_req_sync3;
+            stretch[2] <= stretch[1];
         end
     end
+    assign dac_done_stretched = |stretch;
 
-     //------------------------------------------------------------
+    always_ff @(posedge clk_sampler or posedge adc_rst) begin
+        if (adc_rst)
+            sync_DA <= 0;
+        else begin
+            sync_DA[0] <= dac_done_stretched;
+            sync_DA[1] <= sync_DA[0];
+        end
+    end
+    assign sampler_request = sync_DA[1];
+
+    //------------------------------------------------------------
     // ADC -> DAC CDC
     //------------------------------------------------------------
-    always_ff @(posedge dac_clk or posedge dac_rst) begin
+    (* ASYNC_REG = "TRUE" *)    logic [1:0] sync_AD;
-        if (dac_rst) begin
+
-            sample_done <= 1'b0;
+    always_ff @(posedge clk_generator or posedge dac_rst) begin
-            sample_done_sync2 <= 1'b0;
+        if (dac_rst)
-            sample_done_sync3 <= 1'b0;
+            sync_AD <= 0;
-        end
         else begin
-            sample_done_sync2 <= sample_done_sync1;
+            sync_AD[0] <= sampler_done;
-            sample_done_sync3 <= sample_done_sync2;
+            sync_AD[1] <= sync_AD[0];
-            sample_done <= sample_done_sync3;
         end
     end
+    assign generator_request = sync_AD[1];
 
-     //------------------------------------------------------------
-    // Generator
     //------------------------------------------------------------
-
+    // Generator (DAC)
+    //------------------------------------------------------------
     generator #(
-        .DATA_WIDTH(DAC_DATA_WIDTH)
+        .DATA_WIDTH(DAC_DATA_WIDTH),
+        .ZERO_LEVEL(ZERO_LEVEL)
     ) generator_inst (
-        .clk_in(dac_clk),
+        .clk_dac(clk_generator),
         .rst(dac_rst),
         .start(dac_start),
         .pulse_width(dac_pulse_width),
         .pulse_period(dac_pulse_period),
         .pulse_height(dac_pulse_height),
         .pulse_num(dac_pulse_num),
-        .pulse(p2_wrt),
+        .dac_out(dac_data),
-        .pulse_height_out(p2_data),
+        .done(generator_done),
-        .sample_done(sample_done),
+        .request(generator_request)
-        .sample_req(sample_req_sync1)
     );
+    assign dac_wrt = dac_clk_o;
 
-    wire ch2_clk_oddr;
-
-    ODDR #(
-        .DDR_CLK_EDGE("SAME_EDGE"),
-        .INIT(1'b0),
-        .SRTYPE("SYNC")
-    ) ODDR_ch2_clk (
-        .Q (ch2_clk_oddr),
-        .C (adc_clk),
-        .CE(1'b1),
-        .D1(1'b1),
-        .D2(1'b0),
-        .R (1'b0),
-        .S (1'b0)
-    );
-
-    OBUF OBUF_ch2_clk (
-        .I(ch2_clk_oddr),
-        .O(ch2_clk)
-    );
-
-    wire p2_clk_oddr;
-
-    ODDR #(
-        .DDR_CLK_EDGE("SAME_EDGE"),
-        .INIT(1'b0),
-        .SRTYPE("SYNC")
-    ) ODDR_p2_clk (
-        .Q (p2_clk_oddr),
-        .C (dac_clk),
-        .CE(1'b1),
-        .D1(1'b1),
-        .D2(1'b0),
-        .R (1'b0),
-        .S (1'b0)
-    );
-
-    OBUF OBUF_p2_clk (
-        .I(p2_clk_oddr),
-        .O(p2_clk)
-    );
-
-// -------------------------------------------------------------------------
-    // ADC
     // -------------------------------------------------------------------------
+    // Sampler (ADC)
+    // -------------------------------------------------------------------------
+    wire [ADC_DATA_WIDTH*PACK_FACTOR-1:0]   sampler_m_axis_tdata;
+    wire                                    sampler_m_axis_tvalid;
 
-    (* MARK_DEBUG="true" *) logic [ADC_DATA_WIDTH*PACK_FACTOR-1:0]  accum_m_axis_tdata;
+    sampler #(
-    (* MARK_DEBUG="true" *) logic acum_m_axis_tvalid;
-
-    sampler 
-    #(
         .DATA_WIDTH(ADC_DATA_WIDTH),
         .PACK_FACTOR(PACK_FACTOR),
         .PROCESS_MODE(PROCESS_MODE)
-    )
+    ) sampler_dut (
-    sampler_dut
+        .clk_in(clk_sampler),
-    (
+        .rst(adc_rst),
-       .clk_in(adc_clk),
+        .data_in(adc_data),
-       .rst(adc_rst),
+        .out_of_range(adc_otr),
-       .data_in(ch2_data),
+        .m_axis_tdata(sampler_m_axis_tdata),
-       .out_of_range(ch2_otr),
+        .m_axis_tvalid(sampler_m_axis_tvalid),
-       .m_axis_tdata(accum_m_axis_tdata),
-       .m_axis_tvalid(acum_m_axis_tvalid),
         .smp_num(adc_pulse_period),
-        .sample_req(sample_req),
+        .done(sampler_done),
-        .sample_done(sample_done_sync1)
+        .request(sampler_request)
     );
 
     // -------------------------------------------------------------------------
     // Accumulator
     // -------------------------------------------------------------------------
-
+    accumulator_top #(
-    accumulator_top
-    #(
         .DATA_WIDTH(ADC_DATA_WIDTH),
         .ACCUM_WIDTH(ACCUM_WIDTH),
         .N_MAX(N_MAX),
         .WINDOW_SIZE(WINDOW_SIZE),
         .PACKET_SIZE(PACKET_SIZE)
-    )
+    ) accumulator_top_dut (
-    accumulator_top_dut
+        .clk_in(clk_sampler),
-    (
-        .clk_in(adc_clk),
         .rst(adc_rst),
-        .s_axis_tdata(accum_m_axis_tdata),
+        .s_axis_tdata(sampler_m_axis_tdata),
-        .s_axis_tvalid(acum_m_axis_tvalid),
+        .s_axis_tvalid(sampler_m_axis_tvalid),
         .start(adc_start),
         .smp_num(adc_pulse_period),
         .seq_num(adc_pulse_num),
 
-        .eth_clk_in(gmii_tx_clk),
+        .req_ready(request_ready),
-        .req_ready(req_ready),
+        .send_req(send_request),
-        .send_req(send_req),
+        .eth_clk_in(clk_axis_accumulator),
-        .m_axis_tdata(s_axis_tx_tdata),
+        .m_axis_tdata(axis_accumulator.tdata),
-        .m_axis_tvalid(s_axis_tx_tvalid),
+        .m_axis_tvalid(axis_accumulator.tvalid),
-        .m_axis_tready(s_axis_tx_tready),
+        .m_axis_tready(axis_accumulator.tready),
-        .m_axis_tlast(s_axis_tx_tlast),
+        .m_axis_tlast(axis_accumulator.tlast),
 
         .finish(finish)
     );
 
-
+endmodule
-    // -------------------------------------------------------------------------
-    // Simple LED status
-    // -------------------------------------------------------------------------
-    assign led[0] = clk_wiz_locked;
-    assign led[1] = m_axis_rx_tvalid;
-    assign led[2] = dac_start;
-
-endmodule

designs/reflectometer_base/reflectometer_tb.sv

@@ -0,0 +1,285 @@
+`timescale 1ns / 1ps
+
+`include "interfaces.svh"
+
+module reflectometer_tb;
+    //------------------------------------------------------------
+    // Параметры
+    //------------------------------------------------------------
+    localparam int unsigned DAC_DATA_WIDTH = 14;
+    localparam int unsigned ADC_DATA_WIDTH = 12;
+    localparam LOGIC_ZERO_LEVEL     = 0; // DAC -5V for logic zero
+    localparam VOLTAGE_ZERO_LEVEL   = 2**(DAC_DATA_WIDTH-1); // DAC 0V for logic zero
+    localparam PACK_FACTOR = 1;     // not used in TB
+    localparam PROCESS_MODE = 1;    // 0 - uint, 1 - int
+    localparam ACCUM_WIDTH = 32;    // accumulator number bit witdth
+    localparam N_MAX = 4096;        // max value of windows to average by experiments
+    localparam WINDOW_SIZE = 65;    // fixed subwindow size to average by time
+    localparam PACKET_SIZE = 1024;  // bytes per UDP packet
+
+    localparam ZERO_LEVEL           = LOGIC_ZERO_LEVEL; // "logic" VS "voltage"
+
+    localparam CLK_ETH_PHY_PERIOD           = 8.000; // 125 MHz
+    localparam CLK_REF_PERIOD               = 5.000; // 200 MHz
+
+    //------------------------------------------------------------
+    // Тактовые сигналы и сброс
+    //------------------------------------------------------------
+    logic clk_ref       = 1'b0; // 200 MHz
+    logic clk_eth_phy   = 1'b0; // common for RX & TX
+    logic rst_n         = 1'b0;
+    //------------------------------------------------------------
+    // Управление и конфиг
+    //------------------------------------------------------------
+    
+    //------------------------------------------------------------
+    // Входы
+    //------------------------------------------------------------
+
+    //------------------------------------------------------------
+    // Выходы
+    //------------------------------------------------------------
+    wire mmcm_locked;
+    //------------------------------------------------------------
+    // Внутренние сигналы тестбенча
+    //------------------------------------------------------------
+    // AXI-S интерфейс для управления
+    axis_if axis_control_if (
+        .clk(clk_eth_phy),
+        .rst_n(rst_n)
+    );
+    // AXI-S интерфейс для данных
+    axis_if axis_accumulator_if (
+        .clk(clk_eth_phy),
+        .rst_n(rst_n)
+    );
+    // DAC интерфейс
+    wire                       clk_dac;
+    wire                       dac_wrt;
+    wire [DAC_DATA_WIDTH-1:0]  dac_data;
+    // ADC интерфейс
+    wire                       clk_adc;
+    wire                       adc_otr;
+    wire [ADC_DATA_WIDTH-1:0]  adc_data;
+    // Интерфейс хендшейка с MAC-PHY
+    wire  send_request;
+    logic request_ready;
+    // Сигналы ЦАП и АЦП
+    real signal_voltage;
+    
+    //------------------------------------------------------------
+    // Virtual DAC
+    //------------------------------------------------------------
+    virtual_dac_model #( // default voltage range is +/- 5V
+        .DAC_DATA_WIDTH(DAC_DATA_WIDTH)
+        // ,.VOLTAGE_GAIN(2)
+    ) virtual_dac (
+        .clk_i(clk_dac),
+        .wrt_i(dac_wrt),
+        .data_i(dac_data),
+        .voltage_o(signal_voltage)
+    );
+    //------------------------------------------------------------
+    // Virtual ADC
+    //------------------------------------------------------------
+    virtual_adc_model #( // default voltage range is +/- 5V
+        .ADC_DATA_WIDTH(ADC_DATA_WIDTH)
+    ) virtual_adc (
+        .clk_i(clk_adc),
+        .voltage_i(signal_voltage),
+        .otr_o(adc_otr),
+        .data_o(adc_data)
+    );
+    //------------------------------------------------------------
+    // Statistics monitor
+    //------------------------------------------------------------
+
+    //------------------------------------------------------------
+    // Config handler
+    //------------------------------------------------------------
+
+    //------------------------------------------------------------
+    // DUT
+    //------------------------------------------------------------
+    reflectometer_top #(
+        .DAC_DATA_WIDTH(DAC_DATA_WIDTH),
+        .ADC_DATA_WIDTH(ADC_DATA_WIDTH),
+        .PACK_FACTOR(PACK_FACTOR),
+        .PROCESS_MODE(PROCESS_MODE),
+        .ZERO_LEVEL(ZERO_LEVEL),
+        .ACCUM_WIDTH(ACCUM_WIDTH),
+        .N_MAX(N_MAX),
+        .WINDOW_SIZE(WINDOW_SIZE),
+        .PACKET_SIZE(PACKET_SIZE)
+    ) DUT (
+        .clk_in(clk_ref),
+        .rst_n(rst_n),
+        .locked(mmcm_locked),
+
+        // Accumulator AXI-S bus
+        .clk_axis_accumulator(clk_eth_phy), //  GMII PHY RX clock    
+        .axis_accumulator(axis_accumulator_if.master),
+
+        // Control AXI-S bus
+        .clk_axis_control(clk_eth_phy), //  GMII PHY TX clock  
+        .axis_control(axis_control_if.slave),
+        
+        // RTL-MAC handshake
+        .request_ready(request_ready),
+        .send_request(send_request),
+
+        // DAC
+        .dac_clk_o(clk_dac),
+        .dac_data(dac_data),
+        .dac_wrt(dac_wrt),
+
+        // ADC
+        .adc_clk_o(clk_adc),
+        .adc_data(adc_data),
+        .adc_otr(adc_otr)
+    );
+    //------------------------------------------------------------
+    // Тактовые сигналы
+    //------------------------------------------------------------
+    initial begin
+        forever #(CLK_REF_PERIOD/2) clk_ref = ~clk_ref;
+    end
+    initial begin
+        forever #(CLK_ETH_PHY_PERIOD/2) clk_eth_phy = ~clk_eth_phy;
+    end
+    //------------------------------------------------------------
+    // Таски для тестирования
+    //------------------------------------------------------------
+    // Таски работы с AXI-Stream
+    task automatic dut_soft_reset(virtual axis_if#(8).tb vif);
+        logic [7:0] tx_packet[];
+        tx_packet = '{8'h0f};
+        vif.master_send(tx_packet);
+    endtask
+
+    task automatic dut_start(virtual axis_if#(8).tb vif);
+        logic [7:0] tx_packet[];
+        tx_packet = '{8'hf0};
+        vif.master_send(tx_packet);
+    endtask
+    
+    task automatic dut_send_system_config(
+        virtual axis_if#(8).tb vif,
+        input logic [31:0] pulse_width,
+        input logic [31:0] pulse_period,
+        input logic [15:0] pulse_num,
+        input logic [13:0] pulse_height, // achtung! p_height strictly must have 14 bits of width
+        input logic [31:0] pulse_period_adc
+    );
+        // Создаем временный фиксированный массив и упаковываем всё одной строкой
+        logic [7:0] tx_packet[];
+        
+        tx_packet = '{
+            8'h88, // Команда
+            pulse_width[7:0],  pulse_width[15:8],  pulse_width[23:16],  pulse_width[31:24],
+            pulse_period[7:0], pulse_period[15:8], pulse_period[23:16], pulse_period[31:24],
+            pulse_num[7:0],    pulse_num[15:8], pulse_height[7:0], 8'({2'b00, pulse_height[13:8]}),
+            pulse_period_adc[7:0], pulse_period_adc[15:8], pulse_period_adc[23:16], pulse_period_adc[31:24]
+        };
+        
+        vif.master_send(tx_packet);
+    endtask
+
+    // Таски сбора и обработки статистики
+    task automatic dut_read_output(
+        virtual axis_if#(8).tb vif,
+        input   int     sample_num,
+        input   bit     randomize_recv_delays,
+        output  int     output_data[]
+    );
+        logic [7:0]             rx_packet[];
+        logic [ACCUM_WIDTH-1:0] data_packet[];
+        int                     packet_num = $ceil(real'(sample_num / WINDOW_SIZE) / real'(PACKET_SIZE));
+        int                     numbers_per_packet = PACKET_SIZE/(ACCUM_WIDTH/8);
+        int idx = 0;
+
+        if (sample_num % WINDOW_SIZE) begin
+            $display("[TB] -dut_read_output- Error, sample_num must be multiple of WINDOW_SIZE: %0d %% %0d = %0d", sample_num, WINDOW_SIZE, sample_num % WINDOW_SIZE);
+            $finish;
+        end
+
+        data_packet = new[numbers_per_packet];
+        output_data = new[numbers_per_packet * packet_num];
+        // count send_request posedge todo
+        // timeout todo
+
+        // recv loop
+        for (int i = 0; i < packet_num; i++) begin
+            // randomize_recv_delays todo
+            request_ready = 1;
+            vif.slave_recv(rx_packet);
+            request_ready = 0;
+
+            // unpack values
+            data_packet = {<< byte {rx_packet}};
+            data_packet = {<< ACCUM_WIDTH {data_packet}};
+
+            // copy and convert values
+            for (int j = 0; j < data_packet.size(); j++) begin
+                output_data[i * data_packet.size() + j] = int'(data_packet[j]);
+            end
+        end
+
+        // wait for dut.finish posedge todo
+        // timeout todo
+
+        // error handling todo
+    endtask
+
+    //------------------------------------------------------------
+    // ОСНОВНОЙ ПРОЦЕСС ТЕСТИРОВАНИЯ
+    //------------------------------------------------------------
+    initial begin
+        int output_data[];
+        
+        automatic virtual axis_if.tb control_vif = axis_control_if.tb;
+        automatic virtual axis_if.tb accumulator_vif = axis_accumulator_if.tb;
+        
+        $display("[TB] DUT initializaton");
+        // Инициализация
+        request_ready = 0;
+        rst_n = 0;
+        #100;
+        rst_n = 1;
+        wait(mmcm_locked === 1'b1);
+        #150;
+        $display("[TB] MMCM locked");
+        
+        dut_soft_reset(control_vif);
+        #100;
+        
+        // Тесты
+        $display("[TB] Tests start");
+        dut_send_system_config(
+            .vif(control_vif),
+            .pulse_width(32'd123),
+            .pulse_period(32'd5000),
+            .pulse_num(16'd1),
+            .pulse_height(14'd15000), // 0V
+            .pulse_period_adc(32'd2600)
+        );
+        #100;
+        dut_start(control_vif);
+
+        dut_read_output(
+            .vif(accumulator_vif),
+            .sample_num(2600),
+            .randomize_recv_delays(0),
+            .output_data(output_data)
+        );
+
+        $display("Received %0d numbers", output_data.size());
+        for (int i = 0; i < output_data.size(); i++) begin
+            $write("%0d ", output_data[i]);
+        end
+        $display("");
+        
+        $display("[TB] ALL PASSED");
+        $finish;
+    end
+endmodule

designs/reflectometer_base/reflectometer_tb_behav.wcfg

@@ -0,0 +1,117 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<wave_config>
+   <wave_state>
+   </wave_state>
+   <db_ref_list>
+      <db_ref path="reflectometer_tb_behav.wdb" id="1">
+         <top_modules>
+            <top_module name="glbl" />
+            <top_module name="reflectometer_tb" />
+         </top_modules>
+      </db_ref>
+   </db_ref_list>
+   <zoom_setting>
+      <ZoomStartTime time="0.000 ns"></ZoomStartTime>
+      <ZoomEndTime time="1,506.001 ns"></ZoomEndTime>
+      <Cursor1Time time="1,000.000 ns"></Cursor1Time>
+   </zoom_setting>
+   <column_width_setting>
+      <NameColumnWidth column_width="196"></NameColumnWidth>
+      <ValueColumnWidth column_width="76"></ValueColumnWidth>
+   </column_width_setting>
+   <WVObjectSize size="7" />
+   <wvobject type="logic" fp_name="/reflectometer_tb/rst_n">
+      <obj_property name="ElementShortName">rst_n</obj_property>
+      <obj_property name="ObjectShortName">rst_n</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/reflectometer_tb/mmcm_locked">
+      <obj_property name="ElementShortName">mmcm_locked</obj_property>
+      <obj_property name="ObjectShortName">mmcm_locked</obj_property>
+   </wvobject>
+   <wvobject type="group" fp_name="group28">
+      <obj_property name="label">Signal</obj_property>
+      <obj_property name="DisplayName">label</obj_property>
+      <wvobject type="array" fp_name="/reflectometer_tb/dac_data">
+         <obj_property name="ElementShortName">dac_data[13:0]</obj_property>
+         <obj_property name="ObjectShortName">dac_data[13:0]</obj_property>
+      </wvobject>
+      <wvobject type="other" fp_name="/reflectometer_tb/signal_voltage">
+         <obj_property name="ElementShortName">signal_voltage</obj_property>
+         <obj_property name="ObjectShortName">signal_voltage</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/reflectometer_tb/adc_data">
+         <obj_property name="ElementShortName">adc_data[11:0]</obj_property>
+         <obj_property name="ObjectShortName">adc_data[11:0]</obj_property>
+      </wvobject>
+      <wvobject type="logic" fp_name="/reflectometer_tb/adc_otr">
+         <obj_property name="ElementShortName">adc_otr</obj_property>
+         <obj_property name="ObjectShortName">adc_otr</obj_property>
+      </wvobject>
+   </wvobject>
+   <wvobject type="logic" fp_name="/reflectometer_tb/send_request">
+      <obj_property name="ElementShortName">send_request</obj_property>
+      <obj_property name="ObjectShortName">send_request</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/reflectometer_tb/request_ready">
+      <obj_property name="ElementShortName">request_ready</obj_property>
+      <obj_property name="ObjectShortName">request_ready</obj_property>
+   </wvobject>
+   <wvobject type="group" fp_name="group51">
+      <obj_property name="label">Controller</obj_property>
+      <obj_property name="DisplayName">label</obj_property>
+      <obj_property name="isExpanded"></obj_property>
+      <wvobject type="logic" fp_name="/reflectometer_tb/axis_control_if/clk">
+         <obj_property name="ElementShortName">clk</obj_property>
+         <obj_property name="ObjectShortName">clk</obj_property>
+      </wvobject>
+      <wvobject type="logic" fp_name="/reflectometer_tb/axis_control_if/rst_n">
+         <obj_property name="ElementShortName">rst_n</obj_property>
+         <obj_property name="ObjectShortName">rst_n</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/reflectometer_tb/axis_control_if/tdata">
+         <obj_property name="ElementShortName">tdata[7:0]</obj_property>
+         <obj_property name="ObjectShortName">tdata[7:0]</obj_property>
+      </wvobject>
+      <wvobject type="logic" fp_name="/reflectometer_tb/axis_control_if/tvalid">
+         <obj_property name="ElementShortName">tvalid</obj_property>
+         <obj_property name="ObjectShortName">tvalid</obj_property>
+      </wvobject>
+      <wvobject type="logic" fp_name="/reflectometer_tb/axis_control_if/tlast">
+         <obj_property name="ElementShortName">tlast</obj_property>
+         <obj_property name="ObjectShortName">tlast</obj_property>
+      </wvobject>
+      <wvobject type="logic" fp_name="/reflectometer_tb/axis_control_if/tready">
+         <obj_property name="ElementShortName">tready</obj_property>
+         <obj_property name="ObjectShortName">tready</obj_property>
+      </wvobject>
+   </wvobject>
+   <wvobject type="group" fp_name="group52">
+      <obj_property name="label">Accumulator</obj_property>
+      <obj_property name="DisplayName">label</obj_property>
+      <obj_property name="isExpanded"></obj_property>
+      <wvobject type="logic" fp_name="/reflectometer_tb/axis_accumulator_if/clk">
+         <obj_property name="ElementShortName">clk</obj_property>
+         <obj_property name="ObjectShortName">clk</obj_property>
+      </wvobject>
+      <wvobject type="logic" fp_name="/reflectometer_tb/axis_accumulator_if/rst_n">
+         <obj_property name="ElementShortName">rst_n</obj_property>
+         <obj_property name="ObjectShortName">rst_n</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/reflectometer_tb/axis_accumulator_if/tdata">
+         <obj_property name="ElementShortName">tdata[7:0]</obj_property>
+         <obj_property name="ObjectShortName">tdata[7:0]</obj_property>
+      </wvobject>
+      <wvobject type="logic" fp_name="/reflectometer_tb/axis_accumulator_if/tvalid">
+         <obj_property name="ElementShortName">tvalid</obj_property>
+         <obj_property name="ObjectShortName">tvalid</obj_property>
+      </wvobject>
+      <wvobject type="logic" fp_name="/reflectometer_tb/axis_accumulator_if/tlast">
+         <obj_property name="ElementShortName">tlast</obj_property>
+         <obj_property name="ObjectShortName">tlast</obj_property>
+      </wvobject>
+      <wvobject type="logic" fp_name="/reflectometer_tb/axis_accumulator_if/tready">
+         <obj_property name="ElementShortName">tready</obj_property>
+         <obj_property name="ObjectShortName">tready</obj_property>
+      </wvobject>
+   </wvobject>
+</wave_config>

designs/reflectometer_prototype/README.md

@@ -1,11 +1,13 @@
-# Тестовый проект Generator + ETH + CTRL
+# Тестовый проект рефлектометра
-Проект состоит из AXIS Ethernet, контроллера и генератора. Позволяет генерировать сигналы, задав параметры через Ethernet.
+Проект состоит из AXIS Ethernet и основной части рефлектометра - генератора, сэмплера, контроллера и синхронизирующей логики. Разработан для AX7102, АЦП AN9238, ЦАП AD9767. Плата подключается по ethernet к компьютеру, IP должен быть 192.168.0.3 у компьютера, в ПЛИС установлен IP 192.168.0.2, после подключения должен пройти ARP и после этого можно начнить коммуникацию через консольку.
 ## Сборка
 ```make all``` - собрать все до битстрима
 
 ```make vivado``` - открыть проект в Vivado
 
 ## Управление
-Используйте software/console.py. Пример:
+Используйте software/console.py. Примеры:
 
-```python3 console.py --pulse_width 3_500_000 --pulse_period 20_000_000 --pulse_height 10000 --pulse_num 5500 --dac-bits 14```
+```python3 console.py --pulse_width 3500 --pulse_period 20000 --pulse_height 15000 --pulse_num 550 --dac-bits 14```
+
+```python3 console.py --pulse_width 15000 --pulse_period 20000 --pulse_height 1500 --pulse_num 550 --dac-bits 14```

designs/reflectometer_prototype/prototype.sv

@@ -5,6 +5,7 @@ module prototype_top #(
     parameter int unsigned ADC_DATA_WIDTH = 12,
     parameter PACK_FACTOR = 1,
     parameter PROCESS_MODE = 0,
+    parameter ZERO_LEVEL = 8192,
     parameter ACCUM_WIDTH = 32,
     parameter N_MAX = 4096,
     parameter WINDOW_SIZE = 65,
@@ -131,6 +132,7 @@ module prototype_top #(
         .PACK_FACTOR(PACK_FACTOR),
         .ACCUM_WIDTH(ACCUM_WIDTH),
         .N_MAX(N_MAX),
+        .ZERO_LEVEL(ZERO_LEVEL),
         .WINDOW_SIZE(WINDOW_SIZE),
         .PACKET_SIZE(PACKET_SIZE),
         .ADC_DATA_WIDTH(ADC_DATA_WIDTH),

docs/sampler.md

@@ -1 +0,0 @@
-# Блок Sampler

rtl/accum/tests/tb_accumulator_top_behav.wcfg

@@ -11,13 +11,13 @@
       </db_ref>
    </db_ref_list>
    <zoom_setting>
-      <ZoomStartTime time="0.000000 us"></ZoomStartTime>
+      <ZoomStartTime time="2,748,541.000 ns"></ZoomStartTime>
-      <ZoomEndTime time="16.740001 us"></ZoomEndTime>
+      <ZoomEndTime time="2,749,382.001 ns"></ZoomEndTime>
-      <Cursor1Time time="6.500000 us"></Cursor1Time>
+      <Cursor1Time time="2,749,045.000 ns"></Cursor1Time>
    </zoom_setting>
    <column_width_setting>
       <NameColumnWidth column_width="556"></NameColumnWidth>
-      <ValueColumnWidth column_width="111"></ValueColumnWidth>
+      <ValueColumnWidth column_width="107"></ValueColumnWidth>
    </column_width_setting>
    <WVObjectSize size="18" />
    <wvobject type="logic" fp_name="/tb_accumulator_top/clk_in">
@@ -116,6 +116,10 @@
          <obj_property name="ElementShortName">addrb[15:0]</obj_property>
          <obj_property name="ObjectShortName">addrb[15:0]</obj_property>
       </wvobject>
+      <wvobject type="array" fp_name="/tb_accumulator_top/dut/accum_main/wr_state">
+         <obj_property name="ElementShortName">wr_state[3:0]</obj_property>
+         <obj_property name="ObjectShortName">wr_state[3:0]</obj_property>
+      </wvobject>
    </wvobject>
    <wvobject type="group" fp_name="group27">
       <obj_property name="label">fifo</obj_property>
@@ -166,13 +170,13 @@
          <obj_property name="ObjectShortName">PROG_FULL_THRESH[31:0]</obj_property>
       </wvobject>
       <wvobject type="array" fp_name="/tb_accumulator_top/dut/output_async_fifo/xpm_fifo_async_inst/wr_data_count">
-         <obj_property name="ElementShortName">wr_data_count[4:0]</obj_property>
+         <obj_property name="ElementShortName">wr_data_count[9:0]</obj_property>
-         <obj_property name="ObjectShortName">wr_data_count[4:0]</obj_property>
+         <obj_property name="ObjectShortName">wr_data_count[9:0]</obj_property>
          <obj_property name="Radix">UNSIGNEDDECRADIX</obj_property>
       </wvobject>
       <wvobject type="array" fp_name="/tb_accumulator_top/dut/output_async_fifo/xpm_fifo_async_inst/rd_data_count">
-         <obj_property name="ElementShortName">rd_data_count[6:0]</obj_property>
+         <obj_property name="ElementShortName">rd_data_count[11:0]</obj_property>
-         <obj_property name="ObjectShortName">rd_data_count[6:0]</obj_property>
+         <obj_property name="ObjectShortName">rd_data_count[11:0]</obj_property>
          <obj_property name="Radix">UNSIGNEDDECRADIX</obj_property>
       </wvobject>
    </wvobject>

rtl/controller/README.md

@@ -41,14 +41,15 @@
 
 *start* отправляет пульс start на dac_start и adc_start в их доменах. при этом после этого блок перестает быть ready и ждет, пока не придет пульс finish, после этого он возвращается снова в *idle* состояние
 
-*set_data* значит, что следующие 96 бит = 12*8 байт, пришедшии по axis - это конфигурационная информация и ее нужно записать в внутренний регистр на 96 бит.
+*set_data* значит, что следующие 128 бит = 16*8 байт, пришедшии по axis - это конфигурационная информация и ее нужно записать в внутренний регистр на 128 бит.
 
-конфигурационный регистр на 96 бит делится так:
+конфигурационный регистр на 128 бит делится так:
 ```
 reg[31:0] - pulse_width
 reg[63:32] - pulse_period
 reg[79:64] - pulse_num
 reg[79+dac_data_width:80] - pulse_height
+reg[127:96] - pulse_period_adc
 ```
 
 соотвественно эти записанные значения выставляются на соотвествующие выходные сигналы в доменах dac_clk и adc_clk. выходы обновляются каждый раз, когда происходит set_data, и сигналы сохраняют своё значение до следующего set_data.

rtl/controller/tests/tb_control_behav.wcfg

@@ -0,0 +1,197 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<wave_config>
+   <wave_state>
+   </wave_state>
+   <db_ref_list>
+      <db_ref path="tb_control_behav.wdb" id="1">
+         <top_modules>
+            <top_module name="glbl" />
+            <top_module name="tb_control" />
+         </top_modules>
+      </db_ref>
+   </db_ref_list>
+   <zoom_setting>
+      <ZoomStartTime time="0.676 ns"></ZoomStartTime>
+      <ZoomEndTime time="645.677 ns"></ZoomEndTime>
+      <Cursor1Time time="349.676 ns"></Cursor1Time>
+   </zoom_setting>
+   <column_width_setting>
+      <NameColumnWidth column_width="558"></NameColumnWidth>
+      <ValueColumnWidth column_width="61"></ValueColumnWidth>
+   </column_width_setting>
+   <WVObjectSize size="23" />
+   <wvobject type="logic" fp_name="/tb_control/eth_clk_in">
+      <obj_property name="ElementShortName">eth_clk_in</obj_property>
+      <obj_property name="ObjectShortName">eth_clk_in</obj_property>
+      <obj_property name="CustomSignalColor">#008080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/dac_clk_in">
+      <obj_property name="ElementShortName">dac_clk_in</obj_property>
+      <obj_property name="ObjectShortName">dac_clk_in</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/adc_clk_in">
+      <obj_property name="ElementShortName">adc_clk_in</obj_property>
+      <obj_property name="ObjectShortName">adc_clk_in</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/rst_n">
+      <obj_property name="ElementShortName">rst_n</obj_property>
+      <obj_property name="ObjectShortName">rst_n</obj_property>
+      <obj_property name="CustomSignalColor">#800080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_control/s_axis_tdata">
+      <obj_property name="ElementShortName">s_axis_tdata[7:0]</obj_property>
+      <obj_property name="ObjectShortName">s_axis_tdata[7:0]</obj_property>
+      <obj_property name="CustomSignalColor">#008080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+      <obj_property name="Radix">BINARYRADIX</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/s_axis_tvalid">
+      <obj_property name="ElementShortName">s_axis_tvalid</obj_property>
+      <obj_property name="ObjectShortName">s_axis_tvalid</obj_property>
+      <obj_property name="CustomSignalColor">#008080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/s_axis_tready">
+      <obj_property name="ElementShortName">s_axis_tready</obj_property>
+      <obj_property name="ObjectShortName">s_axis_tready</obj_property>
+      <obj_property name="CustomSignalColor">#008080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/s_axis_tlast">
+      <obj_property name="ElementShortName">s_axis_tlast</obj_property>
+      <obj_property name="ObjectShortName">s_axis_tlast</obj_property>
+      <obj_property name="CustomSignalColor">#008080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/finish">
+      <obj_property name="ElementShortName">finish</obj_property>
+      <obj_property name="ObjectShortName">finish</obj_property>
+      <obj_property name="CustomSignalColor">#FAAFBE</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_control/dac_pulse_width">
+      <obj_property name="ElementShortName">dac_pulse_width[31:0]</obj_property>
+      <obj_property name="ObjectShortName">dac_pulse_width[31:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_control/dac_pulse_period">
+      <obj_property name="ElementShortName">dac_pulse_period[31:0]</obj_property>
+      <obj_property name="ObjectShortName">dac_pulse_period[31:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_control/dac_pulse_height">
+      <obj_property name="ElementShortName">dac_pulse_height[11:0]</obj_property>
+      <obj_property name="ObjectShortName">dac_pulse_height[11:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+      <obj_property name="Radix">HEXRADIX</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_control/dac_pulse_num">
+      <obj_property name="ElementShortName">dac_pulse_num[15:0]</obj_property>
+      <obj_property name="ObjectShortName">dac_pulse_num[15:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_control/adc_pulse_period">
+      <obj_property name="ElementShortName">adc_pulse_period[31:0]</obj_property>
+      <obj_property name="ObjectShortName">adc_pulse_period[31:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_control/adc_pulse_num">
+      <obj_property name="ElementShortName">adc_pulse_num[15:0]</obj_property>
+      <obj_property name="ObjectShortName">adc_pulse_num[15:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/dac_start">
+      <obj_property name="ElementShortName">dac_start</obj_property>
+      <obj_property name="ObjectShortName">dac_start</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/adc_start">
+      <obj_property name="ElementShortName">adc_start</obj_property>
+      <obj_property name="ObjectShortName">adc_start</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/dac_rst">
+      <obj_property name="ElementShortName">dac_rst</obj_property>
+      <obj_property name="ObjectShortName">dac_rst</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/adc_rst">
+      <obj_property name="ElementShortName">adc_rst</obj_property>
+      <obj_property name="ObjectShortName">adc_rst</obj_property>
+   </wvobject>
+   <wvobject type="group" fp_name="group499">
+      <obj_property name="label">tb signals</obj_property>
+      <obj_property name="DisplayName">label</obj_property>
+      <wvobject type="array" fp_name="/tb_control/dac_rst_count">
+         <obj_property name="ElementShortName">dac_rst_count[31:0]</obj_property>
+         <obj_property name="ObjectShortName">dac_rst_count[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_control/adc_rst_count">
+         <obj_property name="ElementShortName">adc_rst_count[31:0]</obj_property>
+         <obj_property name="ObjectShortName">adc_rst_count[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_control/dac_start_count">
+         <obj_property name="ElementShortName">dac_start_count[31:0]</obj_property>
+         <obj_property name="ObjectShortName">dac_start_count[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_control/adc_start_count">
+         <obj_property name="ElementShortName">adc_start_count[31:0]</obj_property>
+         <obj_property name="ObjectShortName">adc_start_count[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_control/test_pulse_width">
+         <obj_property name="ElementShortName">test_pulse_width[31:0]</obj_property>
+         <obj_property name="ObjectShortName">test_pulse_width[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_control/test_pulse_period">
+         <obj_property name="ElementShortName">test_pulse_period[31:0]</obj_property>
+         <obj_property name="ObjectShortName">test_pulse_period[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_control/test_pulse_num">
+         <obj_property name="ElementShortName">test_pulse_num[15:0]</obj_property>
+         <obj_property name="ObjectShortName">test_pulse_num[15:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_control/test_pulse_height_raw">
+         <obj_property name="ElementShortName">test_pulse_height_raw[15:0]</obj_property>
+         <obj_property name="ObjectShortName">test_pulse_height_raw[15:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_control/DAC_DATA_WIDTH">
+      <obj_property name="ElementShortName">DAC_DATA_WIDTH[31:0]</obj_property>
+      <obj_property name="ObjectShortName">DAC_DATA_WIDTH[31:0]</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/dut/cfg_ack_toggle_adc">
+      <obj_property name="ElementShortName">cfg_ack_toggle_adc</obj_property>
+      <obj_property name="ObjectShortName">cfg_ack_toggle_adc</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/dut/cfg_ack_toggle_dac">
+      <obj_property name="ElementShortName">cfg_ack_toggle_dac</obj_property>
+      <obj_property name="ObjectShortName">cfg_ack_toggle_dac</obj_property>
+   </wvobject>
+</wave_config>

rtl/generator/README.md

@@ -0,0 +1,91 @@
+# Генератор
+
+Модуль выполняет задачу формирования последовательности импульсов заданной амплитуды, длительности и периода.  
+Дополнительно реализован механизм синхронизации с модулем сэмплера через сигналы `request` и `done`, позволяющий запускать сбор данных для каждого импульса и ожидать подтверждения завершения выборки перед переходом к следующему импульсу.
+
+---
+
+## Список параметров
+
+### DATA_WIDTH
+Ширина выходных данных генератора.
+
+### ZERO_LEVEL
+Уровень сигнала в состоянии отсутствия импульса (базовый уровень сигнала).
+
+Типовые значения:
+
+- `8192` — середина диапазона ЦАП
+- `0` — нулевой уровень
+
+---
+
+## Список входных портов
+
+### clk_dac
+Сигнал тактирования модуля.
+
+### rst
+Сброс модуля и остановка генерации.
+
+### start
+Сигнал запуска последовательности импульсов.
+
+При его активации модуль фиксирует все входные параметры и начинает генерацию.
+
+Повторный запуск во время активной генерации блокируется с помощью внутреннего сигнала `enable`.
+
+### [31:0] pulse_width
+Длительность активной части импульса (в тактах).
+
+### [31:0] pulse_period
+Полный период импульса (в тактах).
+
+### [DATA_WIDTH-1:0] pulse_height
+Амплитуда импульса.
+
+### [15:0] pulse_num
+Количество импульсов, которое необходимо сгенерировать.
+
+### request
+Сигнал запроса на синхронизацию от сэмплера для текущего импульса.
+
+---
+
+## Список выходных портов
+
+### dac_wrt
+Выходной сигнал разрешения записи сигнала 
+
+### [DATA_WIDTH-1:0] dac_out
+Выходное значение амплитуды сигнала.
+
+Во время активной части импульса равно `pulse_height`, вне импульса — `ZERO_LEVEL`.
+
+### done
+Сигнал запроса на запуск синхронизации с сэмплером для текущего импульса.
+
+Поднимается в начале каждого нового импульса и снимается после получения `request`.
+
+---
+
+## Логика работы
+
+После прихода сигнала `start` модуль:
+
+- фиксирует входные параметры генерации
+- поднимает `enable = 1`
+- выполняет `pulse_num` циклов работы
+- - типичный цикл состоит в ожидании синхронизации (`synced`), после чего запуск генерации импульса
+
+Синхронизация представляет из себя простое рукопожатие с внешним модулем, имеющим сигналы `request`/`done` работающими в соответствии с этими сигналами генератора. Один из модулей, входит в ожидание и ставит на свой done активный уровень, после чего ждет, пока второй, запаздывающий модуль не войдет в свой режим ожидания, и не выставит для своего done активный уровень. Для каждого из модулей, на следующий такт после выставления активного уровня, производится проверка своего request. Так, при получении активного request (иными словами активного done от внешнего модуля), модуль незамедлительно опускает уровень своего done и начинает работать. Done подымается до активного уровня хотя-бы на один такт работы соответствующего модуля.
+
+---
+
+## Симуляция
+Тесты запускаются автоматически через make.
+```
+cd tests
+make sim
+```
+При успешном завершении теста высвечивается "ALL PASSED".

rtl/generator/src/generator.sv

@@ -1,103 +1,95 @@
 `timescale 1ns / 1ps
 
-
 module generator
 #(
-    parameter DATA_WIDTH = 14
+    parameter DATA_WIDTH = 14,
-    )
+    parameter ZERO_LEVEL = 8192 // 8192 or 0
+)
 (
-    input clk_in,
+    input clk_dac,
     input rst,
     input start,
     input [31:0]           pulse_width,
     input [31:0]           pulse_period,
     input [DATA_WIDTH-1:0] pulse_height,
     input [15:0]           pulse_num,
-    input sample_done,
+    input request,
     
-    output pulse,
+    output logic [DATA_WIDTH-1:0] dac_out,
-    output[DATA_WIDTH-1:0] pulse_height_out,
+    output logic done
-    output logic sample_req
+);
+    logic [DATA_WIDTH-1:0] pulse_height_reg;
+    logic [31:0] pulse_width_reg, pulse_period_reg;
+    logic [15:0] pulse_num_reg;
     
-    );
+    logic [15:0] cnt_pulse_num;
-    
+    logic [31:0] cnt_pulse_period;
-  (* MARK_DEBUG="true" *)  logic [DATA_WIDTH-1:0] pulse_height_reg, pulse_height_out_reg;
-    
-  (* MARK_DEBUG="true" *)  logic [31:0] pulse_width_reg, pulse_period_reg;
-  (* MARK_DEBUG="true" *)  logic [15:0] pulse_num_reg;
-    
-  (* MARK_DEBUG="true" *)  logic enable;
-  (* MARK_DEBUG="true" *)  logic [15:0] cnt_pulse_num;
-  (* MARK_DEBUG="true" *)  logic [31:0] cnt_period;
 
-    
+    logic enable, synced;
-    always @(posedge clk_in) begin
+
+    initial begin
+        cnt_pulse_period = '0;
+        cnt_pulse_num    = '0;
+        enable           =  0;
+        synced           =  0;
+        dac_out          = ZERO_LEVEL;
+    end
+
+    always @(posedge clk_dac) begin
         if (rst) begin
-            pulse_height_reg <= 0;
+            pulse_height_reg   <=  ZERO_LEVEL;
-            pulse_height_out_reg <= '0;
+            pulse_width_reg    <=  0;
-            pulse_width_reg <= '0;
+            pulse_period_reg   <=  0;
-            pulse_period_reg <= '0;
+            pulse_num_reg      <=  0;
-            pulse_num_reg <= '0;
+            cnt_pulse_num      <=  0;
-            enable <= 0;
+            cnt_pulse_period   <=  0;
-            cnt_pulse_num <= '0;
+            dac_out            <=  ZERO_LEVEL;
-            cnt_period <= '0;
+            done               <=  0;
-            sample_req <= 0;
+            enable             <=  0;
-        end else begin
+            synced             <=  0;
-            if (start) begin
+        end 
-                enable <= 1'b1;
+        else begin
-                cnt_pulse_num <= '0;
+            // wait start for updating registers
-                cnt_period <= '0;
+            if (start & !enable) begin
-                
+                enable              <= 1;
-                sample_req <= 1;
+                pulse_width_reg     <= pulse_width;
-                
+                pulse_period_reg    <= pulse_period;
-                pulse_width_reg <= pulse_width;
+                pulse_num_reg       <= pulse_num;
-                pulse_period_reg <= pulse_period;
+                pulse_height_reg    <= pulse_height;
-                pulse_num_reg <= pulse_num;
-                pulse_height_reg <= pulse_height;
             end
+            // main work cycle
             if (enable) begin
-                if (!sample_req && (cnt_period == 0)) begin
+                if (cnt_pulse_num != pulse_num_reg) begin
-                    pulse_height_out_reg <= '0;
+                    // wait for synchronization with sampler
-                    if (sample_done) begin
+                    if (!synced) begin
-                        sample_req <= 1'b0;
+                        if (request & done) begin
+                            synced  <= 1;
+                            done    <= 0;
+                        end
+                        else
+                            done <= 1;
                     end
-                    
+                    else begin
-                    if (!sample_done) begin
+                        if (cnt_pulse_period != pulse_period_reg) begin
-                        if (cnt_pulse_num == pulse_num_reg - 1) begin
+                            if (cnt_pulse_period < pulse_width_reg)
-                            enable <= 1'b0;
+                                dac_out <= pulse_height_reg;
+                            else
+                                dac_out <= ZERO_LEVEL;
+                            cnt_pulse_period++;
                         end
                         else begin
-                            cnt_pulse_num <= cnt_pulse_num + 1;
+                            cnt_pulse_num++;
-                            sample_req <= 1'b1;
+                            cnt_pulse_period    <=  0;
-                            cnt_period <= 1;
+                            synced              <=  0;
+                            dac_out             <=  ZERO_LEVEL;
                         end
                     end
                 end
-                 else begin
+                else begin
-                        
+                    cnt_pulse_num   <=  0;
-                    if (cnt_period <= pulse_width_reg) begin
+                    enable          <=  0;
-                        pulse_height_out_reg <= pulse_height_reg;
-                    end else begin
-                        pulse_height_out_reg <= '0;
-                    end
-                    if (cnt_period == pulse_period_reg) begin
-                        cnt_period <= 0;
-                    end else begin
-                        cnt_period <= cnt_period + 1;
-                    end
-                    if (sample_req && sample_done) begin
-                        sample_req <= 0;
-                    end
                 end
             end
         end
     end
-
-     OBUF OBUF_pulse_clk (
-        .I(clk_in),
-        .O(pulse)
-    );
-    
-    assign pulse_height_out = pulse_height_out_reg;
-    
 endmodule

rtl/generator/tests/generator_tb.sv

@@ -1,105 +1,360 @@
 `timescale 1ns / 1ps
 
 module generator_tb;
+    // === Параметры ===
+    localparam DATA_WIDTH = 14;
+    localparam LOGIC_ZERO_LEVEL = 0; // DAC -5V for logic zero
+    localparam VOLTAGE_ZERO_LEVEL = 2**(DATA_WIDTH-1); // DAC 0V for logic zero
+    localparam CLK_PERIOD = 8;
+    parameter string ZERO_LEVEL = "logic"; // "logic" VS "true"
 
-    parameter DATA_WIDTH = 14;
+    // === Сигналы ===
-    parameter CLK_PERIOD = 16;
+    // Системные сигналы
-
     logic clk;
     logic rst;
     logic start;
+    // Входные сигналы
+    logic [31:0]            pulse_width;    // config reg
+    logic [31:0]            pulse_period;   // config reg
+    logic [DATA_WIDTH-1:0]  pulse_height;   // config reg
+    logic [15:0]            pulse_num;      // config reg
+    logic sampler_done;             // sampler request for synchronization
+    // Выходные сигналы
+    wire [DATA_WIDTH-1:0] dac_out;  // DAC input logic signal
+    wire generator_done;            // generator request for synchronization
 
-    logic [31:0] pulse_width;
+    // === Переменные ===
-    logic [31:0] pulse_period;
+    int current_zero_level;
-    logic [DATA_WIDTH-1:0] pulse_height;
+    initial begin
-    logic [15:0] pulse_num;
+        if (ZERO_LEVEL == "true")
-
+            current_zero_level = VOLTAGE_ZERO_LEVEL;
-    logic pulse;
+        else
-    logic [DATA_WIDTH-1:0] pulse_height_out;
+            current_zero_level = LOGIC_ZERO_LEVEL;
+    end
 
     // DUT
-    generator #(
+    generate
-        .DATA_WIDTH(DATA_WIDTH)
+        if (ZERO_LEVEL == "true") begin : gen_dut_true
-    ) dut (
+            generator #(
-        .clk_in(clk),
+                .DATA_WIDTH(DATA_WIDTH),
-        .rst(rst),
+                .ZERO_LEVEL(VOLTAGE_ZERO_LEVEL)
-        .start(start),
+            ) dut (
-        .pulse_width(pulse_width),
+                .clk_dac(clk),
-        .pulse_period(pulse_period),
+                .rst(rst),
-        .pulse_height(pulse_height),
+                .start(start),
-        .pulse_num(pulse_num),
+                .pulse_width(pulse_width),
-        .pulse(pulse),
+                .pulse_period(pulse_period),
-        .pulse_height_out(pulse_height_out)
+                .pulse_height(pulse_height),
-    );
+                .pulse_num(pulse_num),
+                .dac_out(dac_out),
+                .done(generator_done),
+                .request(sampler_done)
+            );
+            initial $display("[TB] Generator compiled. ZERO_LEVEL: TRUE");
+        end 
+        else if (ZERO_LEVEL == "logic") begin : gen_dut_logic
+            generator #(
+                .DATA_WIDTH(DATA_WIDTH),
+                .ZERO_LEVEL(LOGIC_ZERO_LEVEL)
+            ) dut (
+                .clk_dac(clk),
+                .rst(rst),
+                .start(start),
+                .pulse_width(pulse_width),
+                .pulse_period(pulse_period),
+                .pulse_height(pulse_height),
+                .pulse_num(pulse_num),
+                .dac_out(dac_out),
+                .done(generator_done),
+                .request(sampler_done)
+            );
+            initial $display("[TB] Generator compiled. ZERO_LEVEL: LOGIC");
+        end
+        else begin : gen_dut_error
+            // Защита от дурака
+            initial begin
+                $display("[ERROR] Unknown value ZERO_LEVEL: %s", ZERO_LEVEL);
+                $finish;
+            end
+        end
+    endgenerate
 
-    // Clock
+    // Тактовые сигналы
     initial begin
         clk = 0;
         forever #(CLK_PERIOD/2) clk = ~clk;
     end
 
-    initial begin
+    // === Таски для тестипрования ===
-        $display("\n=== GENERATOR TEST ===\n");
+    // Таска синхронизации, одно рукопожатие
+    task automatic synchronize(
+        input bit sampler_first,      // 1 - выставить sampler_done ДО генератора, 0 - ПОСЛЕ
+        input int delay_before_ack,   // Если sampler_first=0: задержка ПОСЛЕ gen_done. Если 1: задержка от НАЧАЛА цикла.
+        input int ack_duration        // сколько тактов удерживать sampler_done после встречи сигналов
+    );
+        if (sampler_first) begin
+            // --- сэмплер готов до генератора ---
+            repeat(delay_before_ack) @(posedge clk);
+            sampler_done <= 1;
+            wait(generator_done == 1);
+            repeat(ack_duration) @(posedge clk);
+            sampler_done <= 0;
+        end 
+        else begin
+            // --- генератора готов до сэмплер ---
+            wait(generator_done == 1);
+            repeat(delay_before_ack) @(posedge clk);
+            sampler_done <= 1;
+            repeat(ack_duration) @(posedge clk);
+            sampler_done <= 0;
+        end
+    endtask
 
+    // Таска сброса DUT
+    task automatic reset_dut(
+        input int rst_duration    // сколько тактов держать сброс
+    );
+        rst <= 1;
+        repeat(rst_duration) @(posedge clk);
+        rst <= 0;
+    endtask
+
+    // Таска запуска DUT
+    task automatic start_dut(
+        input int start_duration    // сколько тактов держать импульс
+    );
+        start <= 1;
+        repeat(start_duration) @(posedge clk);
+        start <= 0;
+    endtask
+
+    // Таска конфигурации DUT
+    task automatic set_config(
+        input logic [31:0]              w,  // ширина импульса
+        input logic [31:0]              p,  // период импульса
+        input logic [15:0]              n,  // количество импульсов
+        input logic [DATA_WIDTH-1:0]    h   // высота импульса
+    );
+        // Задаем конфигурационные регистры
+        @(posedge clk);
+        pulse_width  <= w;
+        pulse_period <= p;
+        pulse_num    <= n;
+        pulse_height <= h;
+    endtask
+
+    // Таска проверки устойчивости к долгим управляющим импульсам
+    task automatic check_impulses;
+        // Локальные переменные для хранения случайных параметров
+        int rand_start_duration;
+        int rand_delay;
+        int rand_ack;
+        bit rand_first;
+        int total_impulse_cycles = 0;
+
+        int pulse_w = 11;
+        int pulse_p = 31;
+        int pulse_n = 5;
+        int pulse_h = 1024;
+
+        $display("[TB] -check_impulses- Check system stability under random latencies");
+
+        // Установка конфигурации
+        set_config(
+            .w(pulse_w), 
+            .p(pulse_p), 
+            .n(pulse_n), 
+            .h(pulse_h)
+        );
+
+        reset_dut(5);
+        repeat(2) @(posedge clk);
+
+        // Старт норме 1 такт. Сделаем случайным от 5 до 25 тактов.
+        rand_start_duration = $urandom_range(5, 25);
+        $display("[TB] Long start: %0d clocks", rand_start_duration);
+
+        // Фоновый процесс подсчета тактов импульса
+        fork 
+            begin : counter_proc
+                forever begin
+                    @(negedge clk); // 180 deg. phase shift for "DAC strobing signal"
+                    if (dac_out == pulse_h) begin
+                        total_impulse_cycles++;
+                    end
+                end
+            end
+        join_none
+        
+        // Параллельный запуск длинного старта и обработки синхронизации
+        fork
+            // Поток 1: Удерживаем старт аномально долго
+            begin
+                start_dut(rand_start_duration);
+            end
+            // Поток 2: Обслуживаем n=4 циклов синхронизации со случайными задержками
+            begin
+                repeat(pulse_n) begin
+                    // Рандомизируем параметры для каждого из 4-х рукопожатий
+                    rand_first = $urandom;               // Случайно: Самплер первый (1) или Генератор первый (0)
+                    rand_delay = $urandom_range(1, 8);   // Случайная задержка ожидания (1..8 тактов)
+                    rand_ack   = $urandom_range(5, 10); // Аномально долгий удерживаемый импульс sampler_done (10..30 тактов)
+
+                    synchronize(
+                        .sampler_first(rand_first),
+                        .delay_before_ack(rand_delay),
+                        .ack_duration(rand_ack)
+                    );
+                end
+            end
+        join
+        repeat(pulse_p+5) @(posedge clk);
+        disable counter_proc;
+        // Ожидание завершения переходных процессов
+        repeat(10) @(posedge clk);
+        if (total_impulse_cycles == pulse_w*pulse_n)
+            $display("[TB] -check_impulses- Pulse generation CORRECT");
+        else begin
+                $display("[ERROR] -check_impulses- Pulse generation INCORRECT. Total number of pulses: %d, must be: %d", total_impulse_cycles, pulse_w*pulse_n);
+                $finish;
+        end
+        $display("[TB] -check_impulses- Done");
+    endtask
+
+    task automatic run_test_case(
+        input int pulse_w,
+        input int pulse_p,
+        input int pulse_n,
+        input int pulse_h,
+        input bit skip_reset,   // skip reset sequence on demand
+        input bit count_level   // count ticks of amplitude == pulse_h or amplitude != pulse_h
+    );
+        int total_impulse_cycles = 0;
+
+        if (!skip_reset) begin
+            reset_dut(1);
+            @(posedge clk);
+        end
+
+        set_config(
+            .w(pulse_w), 
+            .p(pulse_p), 
+            .n(pulse_n), 
+            .h(pulse_h)
+        );
+        @(posedge clk);
+
+        start_dut(1);
+        
+        // Фоновый процесс подсчета тактов импульса
+        fork
+            begin : counter_proc
+                forever begin
+                    @(negedge clk); // 180 deg. phase shift for "DAC strobing signal"
+                    if (count_level) begin
+                        if (dac_out == pulse_h) begin
+                            total_impulse_cycles++;
+                        end
+                    end
+                    else begin
+                        if (dac_out != current_zero_level) begin
+                            total_impulse_cycles++;
+                        end
+                    end
+                end
+            end
+        join_none
+
+        repeat(pulse_n) begin
+            synchronize(
+                .sampler_first(0),
+                .delay_before_ack(1),
+                .ack_duration(2)
+            );
+        end
+        repeat(pulse_p+5) @(posedge clk);
+        disable counter_proc;
+        repeat(10) @(posedge clk);
+
+        if (count_level) begin
+            if (total_impulse_cycles == pulse_w*pulse_n)
+                $display("[TB] -run_test_case- Pulse generation CORRECT");
+            else begin
+                    $display("[ERROR] -run_test_case- Pulse generation INCORRECT. Total number of pulses: %d, must be: %d", total_impulse_cycles, pulse_w*pulse_n);
+                    $finish;
+            end
+        end
+        else begin
+            if (total_impulse_cycles == 0)
+                $display("[TB] -run_test_case- Pulse generation CORRECT");
+            else begin
+                    $display("[ERROR] -run_test_case- Pulse generation INCORRECT. Total number of pulses: %d, must be: %d", total_impulse_cycles, 0);
+                    $finish;
+            end
+        end
+    endtask
+
+    // --- ОСНОВНОЙ ПРОЦЕСС ТЕСТИРОВАНИЯ ---
+    initial begin
+        $display("[TB] Tests start");
+
+        // Инициализация
         rst = 1;
         start = 0;
-
         pulse_width  = 0;
         pulse_period = 0;
         pulse_height = 0;
         pulse_num    = 0;
+        sampler_done = 0;
 
-        repeat(5) @(posedge clk);
+        $display("[TB] Test 1. Random latency for control signals");
-        rst = 0;
+        check_impulses();
+        $display("[TB] Test 1 complete");
 
-        // --- Test 1 ---
+        $display("[TB] Test 2. Random configs");
-        // 3 clk 1, 5 clk 0,  4 pulses
+        for (int i = 0; i < 25; i++) begin
-       repeat(2) @(posedge clk);
+            int r_w, r_p, r_n, r_h;
-        pulse_width  = 3;
+            bit r_skip;
-        pulse_period = 8;
-        pulse_num    = 4;
-        pulse_height = 14'h3FF;
-        start = 1;
 
-       repeat(1) @(posedge clk);
+            // Генерируем параметры
-        start = 0;
+            r_p    = $urandom_range(5, 50);          // Период от 5 до 50
+            r_w    = $urandom_range(0, r_p);         // Ширина не больше периода
+            r_n    = $urandom_range(1, 10);          // Количество импульсов
+            r_h    = $urandom_range(1, 2**DATA_WIDTH-1);       // Высота (для 14 бит)
+            r_skip = $urandom_range(0, 1);           // Случайный сброс (0 - сброс, 1 - пропуск)
 
-        repeat(50) @(posedge clk);
+            // Защита от "нулевого" импульса. Невозможно проверить длительность.
+            if (r_h == current_zero_level) begin
+                r_h += $urandom_range(1, 10);
+            end
 
-        // --- Test 2 ---
+            $display("[TB] --- Test #%0d (Config: W=%0d, P=%0d, N=%0d, H=%0d, SkipReset=%0b) ---", 
-        $display("\n--- SECOND RUN ---\n");
+                      i+1, r_w, r_p, r_n, r_h, r_skip);
 
-        @(posedge clk);
+            run_test_case(
-        pulse_width  = 2;
+                .pulse_w(r_w), 
-        pulse_period = 5;
+                .pulse_p(r_p), 
-        pulse_num    = 3;
+                .pulse_n(r_n), 
-        pulse_height = 14'h155;
+                .pulse_h(r_h), 
-        start = 1;
+                .skip_reset(r_skip),
+                .count_level(1)
+            );
+        end
+        $display("[TB] Test 2 complete");
 
-        @(posedge clk);
+        $display("[TB] Test 3. Zero level of pulse height");
-        start = 0;
+        run_test_case(
+            .pulse_w(77), 
+            .pulse_p(131), 
+            .pulse_n(13), 
+            .pulse_h(current_zero_level), 
+            .skip_reset(0),
+            .count_level(0)
+        );
+        $display("[TB] Test 3 complete");
 
-        repeat(40) @(posedge clk);
+        $display("[TB] ALL PASSED");
-        
-         pulse_width  = 3;
-        pulse_period = 8;
-        pulse_num    = 4;
-        pulse_height = 14'h3FF;
-        start = 1;
-
-       repeat(1) @(posedge clk);
-        start = 0;
-
-        repeat(50) @(posedge clk);
-
-        $display("\n=== TEST FINISHED ===");
         $finish;
     end
 
-    // Display
-    always @(posedge clk) begin
-        $display("t=%0t | pulse=%0b | height=%h",
-                  $time, pulse, pulse_height_out);
-    end
-
 endmodule

rtl/sampler/README.md

@@ -1,23 +1,140 @@
 # Сэмплер
-Модуль выполняет задачу сбора данных с выхода АЦП, их обработку, упаковку, и передачу дальше с помощью AXI Stream интерфейса.
 
-## Cписок параметров
+Модуль выполняет задачу сбора данных с выхода АЦП, их обработки, упаковки и передачи дальше с помощью AXI Stream интерфейса.  
-DATA_WIDTH - ширина входных данных, получаемых с АЦП.
+Дополнительно реализован механизм синхронизации с внешним генератором через сигналы `request` и `done`, позволяющий запускать сбор строго по запросу и подтверждать завершение выборки.
-PACK_FACTOR - количество отсчетов, собираемых в один выходной пакет.
+
-PROCESS_MODE - режим интерпретации входного кода. 0 - прямой код, 1 - дополнительный код.
+---
+
+## Список параметров
+
+DATA_WIDTH
+Ширина входных данных, получаемых с АЦП.
+
+PACK_FACTOR
+Количество отсчетов, собираемых в один выходной пакет.
+
+PROCESS_MODE
+Режим интерпретации входного кода:
+
+- `0` — прямой код
+- `1` — дополнительный код
+
+---
 
 ## Список входных портов
-clk_in - сигнал тактирования выходного интерфейса.
+
-rst - сброс модуля и остановка подачи импульсов.
+clk_in
-[DATA_WIDTH-1:0] data_in - входной сигнал с АЦП.
+Сигнал тактирования выходного интерфейса.
-out_of_range - флаг выхода значений данных за допустимый диапазон. 0 - валидны, 1 - не валидны.
+
+rst
+Сброс модуля и остановка работы.
+
+[DATA_WIDTH-1:0] data_in
+Входной сигнал с АЦП.
+
+out_of_range
+Флаг выхода значений данных за допустимый диапазон:
+
+- `0` — данные валидны
+- `1` — данные невалидны и игнорируются
+
+[31:0] smp_num
+Количество валидных отсчетов, которое необходимо собрать после получения запроса на выборку.
+
+request
+Сигнал запроса на синхронизацию от генератора для текущего импульса.
+
+---
 
 ## Список выходных портов
-[DATA_WIDTH*PACK_FACTOR-1:0]  m_axis_tdata - урезанный axis формат, выходные данные. Ширина шины считается исходя из битности данных и фактора упаковки.
+
-m_axis_tvalid - урезанный axis формат, валидность выходных данных.
+[DATA_WIDTH*PACK_FACTOR-1:0] m_axis_tdata
+Урезанный AXI Stream формат, выходные данные.  
+Ширина шины определяется как произведение битности данных и фактора упаковки.
+
+m_axis_tvalid
+Урезанный AXI Stream формат, сигнал валидности выходных данных.  
+Формируется при готовности очередного пакета.
+
+done
+Сигнал запроса на запуск синхронизации с генератором для текущего импульса.
+
+Поднимается в начале каждого нового импульса и снимается после получения `request`.
+
+---
 
 ## Логика работы
-На каждом такте принимаются data_in (значение АЦП) и out_of_range (флаг выхода значений данных за допустимый диапазон). Если out_of_range = 1, то данные игнорируются и не попадают во внутренний буффер. В противном случае, модуль накапливает данные во внутреннем буффере, идет его заполнение до количества данных, равное PACK_FACTOR. Когда буффер оказывается заполненным, он выдает пакет упакованных данных, сопровождая их импульсом m_axis_tvalid (готовность пакета). Если PROCESS_MODE = 1, данные выдаются в дополнительном коде, если PROCESS_MODE = 0 - в прямом.
+
+На каждом такте принимаются:
+
+- `data_in` — значение АЦП
+- `out_of_range` — флаг допустимости значения
+
+Если `out_of_range = 1`, данные считаются невалидными, игнорируются и не попадают во внутренний буфер.
+
+Если `out_of_range = 0`, данные считаются корректными и используются для дальнейшей обработки.
+
+---
+
+### Преобразование данных
+
+Если `PROCESS_MODE = 1`, входные данные интерпретируются как дополнительный код и преобразуются перед упаковкой.
+
+Если `PROCESS_MODE = 0`, данные передаются без преобразования (прямой код).
+
+---
+
+### Запуск выборки
+
+Сбор данных начинается только после прихода сигнала `request`.
+
+При этом:
+
+- фиксируется значение `smp_num`
+- внутренний счетчик собранных отсчетов обнуляется
+- модуль переходит в активное состояние (`enable = 1`)
+
+Пока `enable = 1`, модуль принимает только валидные отсчеты.
+
+Синхронизация представляет из себя простое рукопожатие с внешним модулем, имеющим сигналы `request`/`done` работающими в соответствии с этими сигналами сэмплера. Один из модулей, входит в ожидание и ставит на свой done активный уровень, после чего ждет, пока второй, запаздывающий модуль не войдет в свой режим ожидания, и не выставит для своего done активный уровень. Для каждого из модулей, на следующий такт после выставления активного уровня, производится проверка своего request. Так, при получении активного request (иными словами активного done от внешнего модуля), модуль незамедлительно опускает уровень своего done и начинает работать. Done подымается до активного уровня хотя-бы на один такт работы соответствующего модуля.
+
+---
+
+### Упаковка данных
+
+Внутренний буфер заполняется до количества данных, равного `PACK_FACTOR`.
+
+#### Если `PACK_FACTOR = 1`
+
+Каждый валидный отсчет сразу формирует выходной пакет:
+
+- данные передаются в `m_axis_tdata`
+- формируется импульс `m_axis_tvalid`
+
+#### Если `PACK_FACTOR > 1`
+
+Данные последовательно накапливаются во внутреннем сдвиговом буфере.
+
+Когда буфер полностью заполнен:
+
+- формируется пакет упакованных данных
+- поднимается `m_axis_tvalid`
+
+После этого начинается сбор следующего пакета.
+
+---
+
+### Завершение выборки
+
+Когда количество собранных валидных отсчетов достигает значения `smp_num`:
+
+- внутренние счетчики сбрасываются
+- буфер очищается
+- `enable` сбрасывается в `0`
+
+Это означает полное завершение текущего цикла выборки.
+
+---
 
 ## Симуляция
 Тесты запускаются автоматически через make.
@@ -25,4 +142,3 @@ m_axis_tvalid - урезанный axis формат, валидность вы
 cd tests
 make sim
 ```
-При успешном завершении теста высвечивается "ALL PASSED".

rtl/sampler/src/sampler.sv

@@ -1,154 +1,87 @@
 `timescale 1ns / 1ps
 
-
-
 module sampler
 #(
     parameter DATA_WIDTH = 12,
     parameter PACK_FACTOR = 1,
     parameter PROCESS_MODE = 0
-    )
+) (
-(
     input clk_in,
     input rst,
     input [DATA_WIDTH-1:0] data_in,
     input out_of_range,
     input [31:0] smp_num,
-    input sample_req,
+    input request,
 
-    output logic [DATA_WIDTH*PACK_FACTOR-1:0]  m_axis_tdata,
+    output logic [DATA_WIDTH*PACK_FACTOR-1:0]  m_axis_tdata, 
     output logic                              m_axis_tvalid,
-    output logic sample_done
+    output logic done
-    );
+);
-   (* MARK_DEBUG="true" *) logic [DATA_WIDTH-1:0] data_converted;
+    // WARNING: number of samples smp_num must be multiple of PACK_FACTOR
-   (* MARK_DEBUG="true" *) logic out_of_range_reg;
+    // Last (smp_num % PACK_FACTOR) will be lost and not transmitted
-    (* MARK_DEBUG="true" *) logic [31:0] smp_num_reg, cnt_smp_num;
+    logic [DATA_WIDTH-1:0] data_converted;
-   (* MARK_DEBUG="true" *) logic enable;
+    logic [31:0] smp_num_reg, cnt_smp_num;
+    logic synced;
+    logic  [$clog2(PACK_FACTOR):0] pack_cnt;
     
-    generate
+    always_comb begin
-       if (PROCESS_MODE) begin 
+            if (PROCESS_MODE) begin
-
+                if (out_of_range) begin
-        always @(posedge clk_in) begin
+                    data_converted = {~data_in[DATA_WIDTH-1], {(DATA_WIDTH-1){data_in[DATA_WIDTH-1]}}};
-            if (rst) begin
+                end else begin
-                data_converted   <= '0;
+                    data_converted = {~data_in[DATA_WIDTH-1], data_in[DATA_WIDTH-2:0]};
-                out_of_range_reg <= 0;
-            end
-            else begin
-                out_of_range_reg <= out_of_range;
-                if (data_in == {1'b1, {(DATA_WIDTH-1){1'b0}}})
-                    data_converted <= data_in;
-                else
-                    data_converted <= data_in[DATA_WIDTH-1] ?{1'b1, (~data_in[DATA_WIDTH-2:0] + 1'b1)}:data_in;
-            end
-        end
-     end else begin
-        always @(posedge clk_in) begin
-            if (rst) begin
-                data_converted   <= '0;
-                out_of_range_reg <= 0;
-            end
-            else begin
-                out_of_range_reg <= out_of_range;
-                data_converted   <= data_in;
-            end
-        end
-     end
-    endgenerate
-         
-  (* MARK_DEBUG="true" *)  logic [DATA_WIDTH*PACK_FACTOR-1:0] buffer;
-  (* MARK_DEBUG="true" *)  logic buffer_ready;
-
-    logic [$clog2(PACK_FACTOR):0] cnt;
-    
-    generate
-      if (PACK_FACTOR == 1) begin
-        always @(posedge clk_in) begin
-            if (rst) begin
-                buffer       <= '0;
-                buffer_ready <= 0;
-                cnt_smp_num <= '0;
-                smp_num_reg <= '0;
-                enable <= '0;
-                sample_done <= 0;
-            end
-            else begin
-                buffer_ready <= 0;
-                if (sample_done && !sample_req) begin
-                    sample_done <= 1'b0;
                 end
-                if (!enable && sample_req && !sample_done) begin
+            end else begin
-                    enable      <= 1;
+                if (out_of_range) begin
+                    data_converted = {DATA_WIDTH{data_in[DATA_WIDTH-1]}};
+                end else begin
+                    data_converted = data_in;
+                end
+            end
+    end
+
+    initial begin
+        synced = 0;
+        m_axis_tdata = '0;
+        m_axis_tvalid = 0;
+    end
+    
+    always_ff @(posedge clk_in) begin
+        if (rst) begin
+            m_axis_tdata <= '0;
+            m_axis_tvalid <= 0;
+            cnt_smp_num <= '0;
+            smp_num_reg <= '0;
+            pack_cnt <= '0;
+            synced <= 0;
+            done <= 0;
+        end else begin
+            if (!synced) begin
+                if (done && request) begin
+                    synced <= 1;
+                    done <= 0;
                     cnt_smp_num <= 0;
                     smp_num_reg <= smp_num;
+                end else begin
+                    done <= 1;
                 end
-                if (enable) begin
+            end else begin
-                    if (!out_of_range_reg) begin
+                if (cnt_smp_num != smp_num_reg) begin
-                        if (cnt_smp_num != smp_num_reg) begin
+                    cnt_smp_num++;
-                            buffer       <= data_converted;
+                    m_axis_tdata[pack_cnt*DATA_WIDTH +: DATA_WIDTH] <= data_converted;
-                            buffer_ready <= 1;
+                    if (pack_cnt == PACK_FACTOR-1) begin
-                            cnt_smp_num <= cnt_smp_num +1;
+                        pack_cnt <= 0;
-                        end 
+                        m_axis_tvalid <= 1;
-                        else begin
+                    end else begin
-                            cnt_smp_num <= '0;
+                        pack_cnt++;
-                            sample_done <= 1'b1;
+                        m_axis_tvalid <= 0;
-                            buffer_ready <= 0;
-                            buffer <= '0;
-                            enable <= 0;
-                        end
                     end
+                end else begin
+                    pack_cnt <= '0;
+                    synced <= 0;
+                    m_axis_tvalid <= 0;
                 end
             end
         end
-      end  else begin
+    end    
-        always @(posedge clk_in) begin
-            if (rst) begin
-                buffer <= '0;
-                cnt <= '0; //
-                buffer_ready <= 0;
-                cnt_smp_num <= '0;
-                smp_num_reg <= '0;
-                enable <= 0;
-                sample_done <= 0;
-            end
-            else begin
-                buffer_ready <= 0;
-                if (sample_done && !sample_req) begin
-                    sample_done <= 1'b0;
-                end
-                if (!enable && sample_req && !sample_done) begin
-                    enable      <= 1;
-                    cnt_smp_num <= 0;
-                    smp_num_reg <= smp_num;
-                end
-                if (enable) begin
-                    if (!out_of_range_reg) begin
-                        if (cnt_smp_num != smp_num_reg) begin
-                            cnt_smp_num <= cnt_smp_num +1;
-                            buffer <= {buffer[DATA_WIDTH*(PACK_FACTOR-1)-1:0], data_converted};
-                            if (cnt == PACK_FACTOR-1) begin
-                                cnt <= 0;
-                                buffer_ready <= 1;
-                                buffer <= {buffer[DATA_WIDTH*(PACK_FACTOR-1)-1:0], data_converted};
-                            end
-                            else begin
-                                cnt <= cnt + 1;
-                            end
-                        end 
-                        else begin
-                            sample_done <= 1'b1;
-                            cnt_smp_num <= '0;
-                            buffer_ready <= 0;
-                            buffer <= '0;
-                            enable <= 0;
-                        end
-                    end
-                end
-            end
-        end
-      end
-    endgenerate
-    
-    assign m_axis_tdata = buffer;
-    assign m_axis_tvalid = buffer_ready;
-    
 endmodule

rtl/sampler/tests/Makefile

@@ -1,51 +0,0 @@
-# SPDX-License-Identifier: MIT
-#
-# Copyright (c) 2025 FPGA Ninja, LLC
-#
-# Authors:
-# - Alex Forencich
-#
-
-# FPGA settings
-FPGA_PART = xc7a35tfgg484-1
-FPGA_TOP = sampler
-FPGA_ARCH = artix7
-
-RTL_DIR = ../src
-
-
-include ../../../scripts/vivado.mk
-
-SYN_FILES += $(sort $(shell find ../src -type f \( -name '*.v' -o -name '*.sv' \)))
-
-XCI_FILES = $(sort $(shell find ../src -type f -name '*.xci'))
-
-XDC_FILES += ../../../constraints/ax7a035b.xdc
-
-SYN_FILES += sampler_main_tb.sv
-SIM_TOP = sampler_tb
-
-
-program: $(PROJECT).bit
-	echo "open_hw_manager" > program.tcl
-	echo "connect_hw_server" >> program.tcl
-	echo "open_hw_target" >> program.tcl
-	echo "current_hw_device [lindex [get_hw_devices] 0]" >> program.tcl
-	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> program.tcl
-	echo "set_property PROGRAM.FILE {$(PROJECT).bit} [current_hw_device]" >> program.tcl
-	echo "program_hw_devices [current_hw_device]" >> program.tcl
-	echo "exit" >> program.tcl
-	vivado -nojournal -nolog -mode batch -source program.tcl
-
-$(PROJECT).mcs $(PROJECT).prm: $(PROJECT).bit
-	echo "write_cfgmem -force -format mcs -size 16 -interface SPIx4 -loadbit {up 0x0000000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
-	echo "exit" >> generate_mcs.tcl
-	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
-	mkdir -p rev
-	COUNT=100; \
-	while [ -e rev/$*_rev$$COUNT.bit ]; \
-	do COUNT=$$((COUNT+1)); done; \
-	COUNT=$$((COUNT-1)); \
-	for x in .mcs .prm; \
-	do cp $*$$x rev/$*_rev$$COUNT$$x; \
-	echo "Output: rev/$*_rev$$COUNT$$x"; done;

rtl/sampler/tests/sampler_main_tb.sv

@@ -1,132 +0,0 @@
-`timescale 1ns / 1ps
-
-module sampler_tb;
-
-    parameter DATA_WIDTH   = 12;
-    parameter PROCESS_MODE = 0;
-    parameter CLK_PERIOD   = 15.3846;
-    parameter TEST_NUM     = 1000;
-
-    logic clk;
-    logic rst;
-
-    logic [DATA_WIDTH-1:0] data_in;
-    logic out_of_range;
-
-    logic [DATA_WIDTH-1:0] m_axis_tdata;
-    logic m_axis_tvalid;
-
-    integer errors = 0;
-
-    sampler #(
-        .DATA_WIDTH(DATA_WIDTH),
-        .PROCESS_MODE(PROCESS_MODE)
-    ) dut (
-        .clk_in(clk),
-        .rst(rst),
-        .data_in(data_in),
-        .out_of_range(out_of_range),
-        .m_axis_tdata(m_axis_tdata),
-        .m_axis_tvalid(m_axis_tvalid)
-    );
-
-    initial begin
-        clk = 0;
-        forever #(CLK_PERIOD/2) clk = ~clk;
-    end
-
-    function automatic [DATA_WIDTH-1:0] ref_convert(input [DATA_WIDTH-1:0] din);
-        if (PROCESS_MODE == 0)
-            return din;
-        else if (din == {1'b1, {(DATA_WIDTH-1){1'b0}}})
-            return din;
-        else
-            return din[DATA_WIDTH-1] ?
-                   {1'b1, (~din[DATA_WIDTH-2:0] + 1'b1)} :
-                   din;
-    endfunction
-
-    task send(input [DATA_WIDTH-1:0] word, input bit oor);
-        @(posedge clk);
-        data_in      <= word;
-        out_of_range <= oor;
-    endtask
-
-    logic [DATA_WIDTH-1:0] exp_d0, exp_d1, exp_d2;
-    logic oor_d0, oor_d1, oor_d2;
-
-    initial begin
-        $display("\n=== RANDOM SAMPLER TEST===\n");
-
-        rst = 1;
-        data_in = 0;
-        out_of_range = 0;
-
-        exp_d0 = 0;
-        exp_d1 = 0;
-        exp_d2 = 0;
-
-        oor_d0 = 1;
-        oor_d1 = 1;
-        oor_d2 = 1;
-
-        repeat(5) @(posedge clk);
-        rst = 0;
-        repeat(2) @(posedge clk);
-
-        repeat (TEST_NUM) begin
-            logic [DATA_WIDTH-1:0] rand_data;
-            bit rand_oor;
-
-            rand_data = $urandom_range(0, (1 << DATA_WIDTH) - 1);
-            rand_oor  = ($urandom_range(0, 99) < 20);
-
-            @(negedge clk);
-
-            if (!oor_d2) begin
-                if (m_axis_tvalid !== 1) begin
-                    $display("ERROR: valid=0");
-                    errors++;
-                end
-
-                if (m_axis_tdata !== exp_d2) begin
-                    $display("ERROR: data mismatch");
-                    $display(" expected = %h", exp_d2);
-                    $display(" got      = %h", m_axis_tdata);
-                    errors++;
-                end
-            end
-
-            send(rand_data, rand_oor);
-
-            exp_d2 = exp_d1;
-            exp_d1 = exp_d0;
-            exp_d0 = ref_convert(rand_data);
-
-            oor_d2 = oor_d1;
-            oor_d1 = oor_d0;
-            oor_d0 = rand_oor;
-        end
-
-        @(posedge clk);
-
-
-        if (!oor_d2) begin
-        
-            if (m_axis_tdata !== exp_d2) begin
-                $display("ERROR: final mismatch");
-                $display(" expected = %h", exp_d2);
-                $display(" got      = %h", m_axis_tdata);
-                errors++;
-            end
-        end
-
-        if (errors == 0)
-            $display("\n========== ALL PASSED ==========\n");
-        else
-            $display("\n========== FAILED: %0d errors ==========\n", errors);
-
-        $finish;
-    end
-
-endmodule

rtl/sampler/tests/sampler_tb.sv

@@ -0,0 +1,218 @@
+`timescale 1ns / 1ps
+
+module sampler_tb;
+
+    localparam DATA_WIDTH   = 12;
+    localparam PACK_FACTOR  = 7;
+    localparam PROCESS_MODE = 0;
+    localparam CLK_PERIOD   = 15.3846;
+    localparam OTR_OFFSET   = 0;
+
+    logic clk;
+    logic rst_dut;
+    logic rst_gen;
+
+    wire [DATA_WIDTH-1:0] data_in;
+    wire out_of_range;
+
+    logic [31:0] smp_num;
+
+    logic done;
+    logic request;
+
+    logic [DATA_WIDTH*PACK_FACTOR-1:0] m_axis_tdata;
+    logic m_axis_tvalid;
+
+    sampler #(
+        .DATA_WIDTH  (DATA_WIDTH),
+        .PACK_FACTOR (PACK_FACTOR),
+        .PROCESS_MODE(PROCESS_MODE)
+    ) dut (
+        .clk_in       (clk),
+        .rst          (rst_dut),
+
+        .data_in      (data_in),
+        .out_of_range (out_of_range),
+
+        .smp_num      (smp_num),
+        .done         (done),
+
+        .m_axis_tdata (m_axis_tdata),
+        .m_axis_tvalid(m_axis_tvalid),
+
+        .request      (request)
+    );
+
+    // =====================================================
+    // CLOCK
+    // =====================================================
+    initial begin
+        clk = 0;
+        forever #(CLK_PERIOD/2) clk = ~clk;
+    end
+
+    // =====================================================
+    // RESET
+    // =====================================================
+    task automatic reset_dut();
+        @(posedge clk);
+        rst_dut = 1;
+        @(posedge clk);
+        rst_dut = 0;
+    endtask
+
+    // =====================================================
+    // FEED DATA
+    // =====================================================
+    triangle_wave_gen #(
+        .DATA_WIDTH(DATA_WIDTH),
+        .OFFSET(OTR_OFFSET), // offset of bits from '0 and '1 for OTR
+        .STEP(1) // LSB bit per clock
+    ) signal_gen (
+        .clk(clk),
+        .rst(rst_gen),
+        .signal(data_in),
+        .otr(out_of_range)
+    );
+
+    // =====================================================
+    // TEST TASKS
+    // =====================================================
+    task automatic run_test_case(
+        input int sample_num
+    );
+        logic [DATA_WIDTH-1:0] input_values[$];
+        logic [DATA_WIDTH-1:0] output_values[$];
+        bit flag;
+
+        // Startup sequence
+        rst_gen <= 1;
+        smp_num <= sample_num;
+        request <= 1;
+        @(posedge clk);
+        
+        // syncronize
+        while (!done)
+            @(posedge clk);
+        request <= 0;
+        
+        // Wait for sync and start signal generator
+        // while (!dut.synced)
+        //     @(posedge clk);
+        wait(dut.synced === 1);
+        rst_gen <= 0;
+
+        // Wait for valid data
+        fork
+            begin : stat_mon_proc
+                forever begin
+                    @(posedge clk);
+                    input_values.push_back(data_in);
+                    if (m_axis_tvalid) begin
+                        for (int i = 0; i < PACK_FACTOR; i++)
+                            output_values.push_back(m_axis_tdata[DATA_WIDTH*i +: DATA_WIDTH]);
+                    end
+                end
+            end
+        join_none
+
+        // Wait until end
+        // while (dut.synced)
+        //     @(posedge clk);
+        wait(dut.synced === 0);
+
+        disable stat_mon_proc;
+        // Pop last input value. Signal is ahead of tdata for 1 cycle
+        input_values.pop_back();
+
+        // check data
+        if (input_values.size() != output_values.size()) begin
+            $display("[ERROR] -run_test_case- Input queue size don't equal to output queue size: %0d vs %0d", input_values.size(), output_values.size());
+            $finish;
+        end
+        flag = 0;
+        for (int i = 0; i < input_values.size(); i++) begin
+            $write(" %0d", input_values[i]);
+            if (input_values[i] != output_values[i])
+                flag = 1;
+        end
+        $write("\n");
+        for (int i = 0; i < input_values.size(); i++) begin
+            $write(" %0d", output_values[i]);
+        end
+        $write("\n");
+        $display("Total: %0d", output_values.size());
+        if (flag) $display("FUCK");
+        else $display("SUCKASS");
+
+    endtask
+
+    // =====================================================
+    // MAIN
+    // =====================================================
+    initial begin
+
+        $display("\n=== BASIC TEST ===");
+
+        rst_dut = 1;
+        rst_gen = 1;
+        smp_num = 0;
+        repeat(2) @(posedge clk);
+        rst_dut = 0;
+        repeat(2) @(posedge clk);
+
+        run_test_case(100);
+
+
+        $display("\n=== RANDOM STRESS TEST ===");
+        // todo
+
+        $display("\n=== TEST FINISHED ===");
+        $finish;
+
+    end
+
+endmodule
+
+module triangle_wave_gen #(
+        parameter DATA_WIDTH = 12,
+        parameter OFFSET = 100, // offset of bits from '0 and '1 for OTR
+        parameter STEP = 1 // LSB bit per clock
+    ) (
+        input clk,
+        input rst,
+        output logic [DATA_WIDTH-1:0] signal,
+        output logic otr
+    );
+    logic [DATA_WIDTH:0] counter;
+    logic direction;
+
+    initial begin
+        counter = '0;
+        direction = 1;
+    end
+
+    assign signal = counter > (2**DATA_WIDTH-1) ? (2**DATA_WIDTH-1) : counter;
+
+    always_comb begin
+        if (signal < OFFSET || (2**DATA_WIDTH - signal) <= OFFSET)
+            otr <= 1;
+        else
+            otr <= 0;
+    end
+
+    always @(posedge clk) begin
+        if (rst) begin
+            counter = 0;
+            direction = 1;
+        end else begin
+            if (direction)
+                counter += STEP;
+            else
+                counter -= STEP;
+
+            if (counter >= 2**DATA_WIDTH-1 || counter <= 0)
+                direction <= ~direction;
+        end
+    end
+endmodule

scripts/build.sh

@@ -1 +0,0 @@
-# mock

software/README.md

@@ -0,0 +1,20 @@
+# Software
+
+Просто скрипт на питоне, для отправки команд через ethernet и для приема и простой визуализации данных.
+
+## Использование
+Справка:
+
+```python3 --help```
+
+Положительный импульс:
+
+```python3 console.py --pulse_width 3500 --pulse_period 20000 --pulse_height 15000 --pulse_num 550 --dac-bits 14```
+
+Отрицательный импульс:
+
+```python3 console.py --pulse_width 15000 --pulse_period 20000 --pulse_height 1500 --pulse_num 550 --dac-bits 14```
+
+## Ограничения
+Максимальный pulse_period считается как аппаратный N_MAX * WINDOW_SIZE * adc_dac_ratio, в базовой конфигурации это 512000. Максимальный pulse_num зависит от подаваемых значений и от битности аккумулятора (по умолчанию - 32), с учетом усреднений по WINDOW_SIZE это получается что-то около 2^14 накоплений.
+