infra: update gitignore for questa folder

Reviewed-on: #14

.gitignore

@@ -16,6 +16,7 @@
 .Xil
 xvlog.pb
 *vivado_pid*
+**/work/*
 
 # some generated files (they annoy me)
 update_config.tcl

README.md

@@ -1,3 +1,10 @@
 # reflectometer_fpga_project
 
-Проект по разработке аппаратной вычислительной части для отпического рефлектометра для обнаружения утечек.
+Проект по разработке аппаратной вычислительной части для оптического рефлектометра для обнаружения утечек.
+
+## Структура
+- constaints: констрейны под ПЛИСы
+- designs: разные сборные дизайны, включая полный проект
+- rtl: код блоков, в каждой папке есть src и tests
+- scripts: скрипты для сборки 
+- software: программные скрипты

constraints/ax7102.xdc

@@ -0,0 +1,172 @@
+# === iostandard ===
+set_property CFGBVS VCCO [current_design]
+set_property CONFIG_VOLTAGE 3.3 [current_design]
+
+# === SPI flash config ===
+set_property BITSTREAM.CONFIG.SPI_BUSWIDTH 4 [current_design]
+set_property CONFIG_MODE SPIx4 [current_design]
+set_property BITSTREAM.CONFIG.CONFIGRATE 50 [current_design]
+
+# === clock config ===
+create_clock -period 5.000 [get_ports sys_clk_p]
+set_property IOSTANDARD DIFF_SSTL15 [get_ports sys_clk_p]
+set_property PACKAGE_PIN R4 [get_ports sys_clk_p]
+set_property PACKAGE_PIN T4 [get_ports sys_clk_n]
+set_property IOSTANDARD DIFF_SSTL15 [get_ports sys_clk_n]
+
+# === reset button ===
+set_property IOSTANDARD LVCMOS15 [get_ports rst_n]
+set_property PACKAGE_PIN T6 [get_ports rst_n]
+
+# === leds ===
+set_property IOSTANDARD LVCMOS33 [get_ports {led[*]}]
+set_property PACKAGE_PIN C17 [get_ports {led[0]}]
+set_property PACKAGE_PIN D17 [get_ports {led[1]}]
+set_property PACKAGE_PIN V20 [get_ports {led[2]}]
+set_property PACKAGE_PIN U20 [get_ports {led[3]}]
+
+# === 1Gb ethernet PHY ===
+set_property PACKAGE_PIN V10 [get_ports e_mdio]
+set_property IOSTANDARD LVCMOS33 [get_ports e_mdio]
+set_property PACKAGE_PIN W10 [get_ports e_mdc]
+set_property IOSTANDARD LVCMOS33 [get_ports e_mdc]
+set_property PULLTYPE PULLUP [get_ports e_mdc]
+set_property SLEW SLOW [get_ports e_mdio]
+set_property PULLTYPE PULLUP [get_ports e_mdio]
+# eth rx
+create_clock -period 8.000 -name rx_clk [get_ports e_rxc]
+set_property IOSTANDARD LVCMOS33 [get_ports e_rxc]
+set_property PACKAGE_PIN K18 [get_ports e_rxc]
+
+set_property IOSTANDARD LVCMOS33 [get_ports e_rxdv]
+set_property PACKAGE_PIN M22 [get_ports e_rxdv]
+
+set_property IOSTANDARD LVCMOS33 [get_ports e_rxer]
+set_property PACKAGE_PIN N19 [get_ports e_rxer]
+
+set_property IOSTANDARD LVCMOS33 [get_ports {e_rxd[*]}]
+set_property PACKAGE_PIN N22 [get_ports {e_rxd[0]}]
+set_property PACKAGE_PIN H18 [get_ports {e_rxd[1]}]
+set_property PACKAGE_PIN H17 [get_ports {e_rxd[2]}]
+set_property PACKAGE_PIN K19 [get_ports {e_rxd[3]}]
+set_property PACKAGE_PIN M21 [get_ports {e_rxd[4]}]
+set_property PACKAGE_PIN L21 [get_ports {e_rxd[5]}]
+set_property PACKAGE_PIN N20 [get_ports {e_rxd[6]}]
+set_property PACKAGE_PIN M20 [get_ports {e_rxd[7]}]
+
+# eth tx
+set_property IOSTANDARD LVCMOS33 [get_ports e_txc]
+set_property PACKAGE_PIN J17 [get_ports e_txc]
+
+set_property IOSTANDARD LVCMOS33 [get_ports e_gtxc]
+set_property PACKAGE_PIN L18 [get_ports e_gtxc]
+
+set_property IOSTANDARD LVCMOS33 [get_ports e_txen]
+set_property PACKAGE_PIN M16 [get_ports e_txen]
+
+set_property IOSTANDARD LVCMOS33 [get_ports e_txer]
+set_property PACKAGE_PIN M13 [get_ports e_txer]
+
+set_property IOSTANDARD LVCMOS33 [get_ports {e_txd[*]}]
+set_property PACKAGE_PIN M15 [get_ports {e_txd[0]}]
+set_property PACKAGE_PIN L14 [get_ports {e_txd[1]}]
+set_property PACKAGE_PIN K16 [get_ports {e_txd[2]}]
+set_property PACKAGE_PIN L16 [get_ports {e_txd[3]}]
+set_property PACKAGE_PIN K17 [get_ports {e_txd[4]}]
+set_property PACKAGE_PIN L20 [get_ports {e_txd[5]}]
+set_property PACKAGE_PIN L19 [get_ports {e_txd[6]}]
+set_property PACKAGE_PIN L13 [get_ports {e_txd[7]}]
+
+set_property IOSTANDARD LVCMOS33 [get_ports e_reset]
+set_property PACKAGE_PIN L15 [get_ports e_reset]
+
+create_clock -period 8.000 -name tx_clk [get_ports e_gtxc]
+
+set_false_path -reset_path -from [get_clocks sys_clk_p] -to [get_clocks rx_clk]
+
+# === ADC an9238 (J4 header) ===
+set_property PACKAGE_PIN K14 [get_ports ch2_clk]
+set_property PACKAGE_PIN K13 [get_ports {ch2_data[0]}]
+set_property PACKAGE_PIN H14 [get_ports {ch2_data[1]}]
+set_property PACKAGE_PIN J14 [get_ports {ch2_data[2]}]
+set_property PACKAGE_PIN H15 [get_ports {ch2_data[3]}]
+set_property PACKAGE_PIN J15 [get_ports {ch2_data[4]}]
+set_property PACKAGE_PIN G13 [get_ports {ch2_data[5]}]
+set_property PACKAGE_PIN H13 [get_ports {ch2_data[6]}]
+set_property PACKAGE_PIN J21 [get_ports {ch2_data[7]}]
+set_property PACKAGE_PIN J20 [get_ports {ch2_data[8]}]
+set_property PACKAGE_PIN G16 [get_ports {ch2_data[9]}]
+set_property PACKAGE_PIN G15 [get_ports {ch2_data[10]}]
+set_property PACKAGE_PIN H19 [get_ports {ch2_data[11]}]
+set_property PACKAGE_PIN J19 [get_ports ch2_otr]
+
+set_property PACKAGE_PIN J16 [get_ports ch1_data[1]]
+set_property PACKAGE_PIN F15 [get_ports ch1_data[0]]
+set_property PACKAGE_PIN K22 [get_ports ch1_data[3]]
+set_property PACKAGE_PIN K21 [get_ports ch1_data[2]]
+set_property PACKAGE_PIN H22 [get_ports ch1_data[5]]
+set_property PACKAGE_PIN J22 [get_ports ch1_data[4]]
+set_property PACKAGE_PIN G20 [get_ports ch1_data[7]]
+set_property PACKAGE_PIN H20 [get_ports ch1_data[6]]
+set_property PACKAGE_PIN G22 [get_ports ch1_data[9]]
+set_property PACKAGE_PIN G21 [get_ports ch1_data[8]]
+set_property PACKAGE_PIN D22 [get_ports ch1_data[11]]
+set_property PACKAGE_PIN E22 [get_ports ch1_data[10]]
+set_property PACKAGE_PIN D21 [get_ports ch1_clk]
+set_property PACKAGE_PIN E21 [get_ports ch1_otr]
+
+set_property IOSTANDARD LVCMOS33 [get_ports ch2_clk]
+set_property IOSTANDARD LVCMOS33 [get_ports {ch2_data[*]}]
+set_property IOSTANDARD LVCMOS33 [get_ports ch2_otr]
+set_property IOSTANDARD LVCMOS33 [get_ports {ch1_data[*]}]
+set_property IOSTANDARD LVCMOS33 [get_ports ch1_clk]
+set_property IOSTANDARD LVCMOS33 [get_ports ch1_otr]
+
+set_property SLEW FAST [get_ports ch2_clk]
+
+
+
+# === DAC an9767(J5 header) ===
+set_property PACKAGE_PIN F13  [get_ports {da1_clk}]
+set_property PACKAGE_PIN F14  [get_ports {da1_wrt}]
+set_property PACKAGE_PIN AB15 [get_ports {da1_data[13]}]
+set_property PACKAGE_PIN AA15 [get_ports {da1_data[12]}]
+set_property PACKAGE_PIN AA14 [get_ports {da1_data[11]}]
+set_property PACKAGE_PIN Y13  [get_ports {da1_data[10]}]
+set_property PACKAGE_PIN AB17 [get_ports {da1_data[9]}]
+set_property PACKAGE_PIN AB16 [get_ports {da1_data[8]}]
+set_property PACKAGE_PIN AA16 [get_ports {da1_data[7]}]
+set_property PACKAGE_PIN Y16  [get_ports {da1_data[6]}]
+set_property PACKAGE_PIN AB12 [get_ports {da1_data[5]}]
+set_property PACKAGE_PIN AB11 [get_ports {da1_data[4]}]
+set_property PACKAGE_PIN Y14  [get_ports {da1_data[3]}]
+set_property PACKAGE_PIN W14  [get_ports {da1_data[2]}]
+set_property PACKAGE_PIN C19  [get_ports {da1_data[1]}]
+set_property PACKAGE_PIN C18  [get_ports {da1_data[0]}]
+
+set_property IOSTANDARD LVCMOS33 [get_ports {da1_data[*]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {da1_wrt}]
+set_property IOSTANDARD LVCMOS33 [get_ports {da1_clk}]
+
+set_property PACKAGE_PIN E14 [get_ports da2_clk]
+set_property PACKAGE_PIN E13 [get_ports da2_wrt]
+set_property PACKAGE_PIN D15 [get_ports {da2_data[13]}]
+set_property PACKAGE_PIN D14 [get_ports {da2_data[12]}]
+set_property PACKAGE_PIN B13 [get_ports {da2_data[11]}]
+set_property PACKAGE_PIN C13 [get_ports {da2_data[10]}]
+set_property PACKAGE_PIN AB13 [get_ports {da2_data[9]}]
+set_property PACKAGE_PIN AA13 [get_ports {da2_data[8]}]
+set_property PACKAGE_PIN A19 [get_ports {da2_data[7]}]
+set_property PACKAGE_PIN A18 [get_ports {da2_data[6]}]
+set_property PACKAGE_PIN E18 [get_ports {da2_data[5]}]
+set_property PACKAGE_PIN F18 [get_ports {da2_data[4]}]
+set_property PACKAGE_PIN F20 [get_ports {da2_data[3]}]
+set_property PACKAGE_PIN F19 [get_ports {da2_data[2]}]
+set_property PACKAGE_PIN A20 [get_ports {da2_data[1]}]
+set_property PACKAGE_PIN B20 [get_ports {da2_data[0]}]
+
+set_property IOSTANDARD LVCMOS33 [get_ports da2_clk]
+set_property IOSTANDARD LVCMOS33 [get_ports da2_wrt]
+set_property IOSTANDARD LVCMOS33 [get_ports {da2_data[*]}]
+
+

constraints/ax7a035b.xdc

@@ -59,39 +59,82 @@ set_property SLEW FAST [get_ports {rgmii_txd[*]}]
 create_clock -period 8.000 [get_ports rgmii_rxc]
 
 # === DAC (J11 header) ===
-set_property IOSTANDARD LVCMOS33 [get_ports p2_clk]
-set_property IOSTANDARD LVCMOS33 [get_ports p2_wrt]
-set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[13]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[12]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[11]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[10]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[9]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[8]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[7]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[6]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[5]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[4]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[3]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[2]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[1]}]
-set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[0]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports p2_clk]
+#set_property IOSTANDARD LVCMOS33 [get_ports p2_wrt]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[13]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[12]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[11]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[10]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[9]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[8]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[7]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[6]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[5]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[4]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[3]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[2]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[1]}]
+#set_property IOSTANDARD LVCMOS33 [get_ports {p2_data[0]}]
+
+#set_property SLEW FAST [get_ports p2_clk]
+
+#set_property PACKAGE_PIN C18 [get_ports p2_clk]
+#set_property PACKAGE_PIN C19 [get_ports p2_wrt]
+#set_property PACKAGE_PIN B17 [get_ports {p2_data[13]}]
+#set_property PACKAGE_PIN B18 [get_ports {p2_data[12]}]
+#set_property PACKAGE_PIN D17 [get_ports {p2_data[11]}]
+#set_property PACKAGE_PIN C17 [get_ports {p2_data[10]}]
+#set_property PACKAGE_PIN A15 [get_ports {p2_data[9]}]
+#set_property PACKAGE_PIN A16 [get_ports {p2_data[8]}]
+#set_property PACKAGE_PIN B15 [get_ports {p2_data[7]}]
+#set_property PACKAGE_PIN B16 [get_ports {p2_data[6]}]
+#set_property PACKAGE_PIN A13 [get_ports {p2_data[5]}]
+#set_property PACKAGE_PIN A14 [get_ports {p2_data[4]}]
+#set_property PACKAGE_PIN E16 [get_ports {p2_data[3]}]
+#set_property PACKAGE_PIN D16 [get_ports {p2_data[2]}]
+#set_property PACKAGE_PIN C14 [get_ports {p2_data[1]}]
+#set_property PACKAGE_PIN C15 [get_ports {p2_data[0]}]
+
+# === ADC an9238 (J11 header) ===
+set_property PACKAGE_PIN G21 [get_ports ch2_clk]
+set_property PACKAGE_PIN G22 [get_ports {ch2_data[0]}]
+set_property PACKAGE_PIN C22 [get_ports {ch2_data[1]}]
+set_property PACKAGE_PIN B22 [get_ports {ch2_data[2]}]
+set_property PACKAGE_PIN F19 [get_ports {ch2_data[3]}]
+set_property PACKAGE_PIN F20 [get_ports {ch2_data[4]}]
+set_property PACKAGE_PIN D20 [get_ports {ch2_data[5]}]
+set_property PACKAGE_PIN C20 [get_ports {ch2_data[6]}]
+set_property PACKAGE_PIN A18 [get_ports {ch2_data[7]}]
+set_property PACKAGE_PIN A19 [get_ports {ch2_data[8]}]
+set_property PACKAGE_PIN B20 [get_ports {ch2_data[9]}]
+set_property PACKAGE_PIN A20 [get_ports {ch2_data[10]}]
+set_property PACKAGE_PIN F18 [get_ports {ch2_data[11]}]
+set_property PACKAGE_PIN E18 [get_ports ch2_otr]
+set_property PACKAGE_PIN C18 [get_ports ch1_data[1]]
+set_property PACKAGE_PIN C19 [get_ports ch1_data[0]]
+set_property PACKAGE_PIN B17 [get_ports ch1_data[3]]
+set_property PACKAGE_PIN B18 [get_ports ch1_data[2]]
+set_property PACKAGE_PIN D17 [get_ports ch1_data[5]]
+set_property PACKAGE_PIN C17 [get_ports ch1_data[4]]
+set_property PACKAGE_PIN A15 [get_ports ch1_data[7]]
+set_property PACKAGE_PIN A16 [get_ports ch1_data[6]]
+set_property PACKAGE_PIN B15 [get_ports ch1_data[9]]
+set_property PACKAGE_PIN B16 [get_ports ch1_data[8]]
+set_property PACKAGE_PIN A13 [get_ports ch1_data[11]]
+set_property PACKAGE_PIN A14 [get_ports ch1_data[10]]
+set_property PACKAGE_PIN E16 [get_ports ch1_clk]
+set_property PACKAGE_PIN D16 [get_ports ch1_otr]
+
+set_property IOSTANDARD LVCMOS33 [get_ports ch2_clk]
+set_property IOSTANDARD LVCMOS33 [get_ports {ch2_data[*]}]
+set_property IOSTANDARD LVCMOS33 [get_ports ch2_otr]
+set_property IOSTANDARD LVCMOS33 [get_ports {ch1_data[*]}]
+set_property IOSTANDARD LVCMOS33 [get_ports ch1_clk]
+set_property IOSTANDARD LVCMOS33 [get_ports ch1_otr]
+
+# 1 bit DAC)))
+set_property PACKAGE_PIN E17 [get_ports debug_dac]
+set_property IOSTANDARD LVCMOS33 [get_ports debug_dac]
 
-set_property SLEW FAST [get_ports p2_clk]
 
-set_property PACKAGE_PIN C18 [get_ports p2_clk]
-set_property PACKAGE_PIN C19 [get_ports p2_wrt]
-set_property PACKAGE_PIN B17 [get_ports {p2_data[13]}]
-set_property PACKAGE_PIN B18 [get_ports {p2_data[12]}]
-set_property PACKAGE_PIN D17 [get_ports {p2_data[11]}]
-set_property PACKAGE_PIN C17 [get_ports {p2_data[10]}]
-set_property PACKAGE_PIN A15 [get_ports {p2_data[9]}]
-set_property PACKAGE_PIN A16 [get_ports {p2_data[8]}]
-set_property PACKAGE_PIN B15 [get_ports {p2_data[7]}]
-set_property PACKAGE_PIN B16 [get_ports {p2_data[6]}]
-set_property PACKAGE_PIN A13 [get_ports {p2_data[5]}]
-set_property PACKAGE_PIN A14 [get_ports {p2_data[4]}]
-set_property PACKAGE_PIN E16 [get_ports {p2_data[3]}]
-set_property PACKAGE_PIN D16 [get_ports {p2_data[2]}]
-set_property PACKAGE_PIN C14 [get_ports {p2_data[1]}]
-set_property PACKAGE_PIN C15 [get_ports {p2_data[0]}]
 

designs/README.md

@@ -1,5 +1,5 @@
 # Директория с тестовыми проектами под ПЛИСу
 
-- eth_ctrl_debug: проект с ethernet и контроллером. Позволяет через ILA проверить, что пакет правильно принимается и что значения правильно выставляются.
-
-- eth_generator: проект на базе eth_ctrl_debug, в который включен генератор импульсов. В паре с ЦАП можно через консольку по Ethernet запускать генерацию разных импульсов.
+- adc_dac_synchronizer: проект для тестирования и отладки связки сэмплер + контроллер + генератор, проверки синхронизации между импульсами.
+- reflectometer_base: базовый проект рефлектометра без внешних интерфейсов, только I/O через AXI Stream.
+- reflectometer_prototype: тестовый проект под AX7102 с управлением и отправкой данных по ethernet.

designs/adc_dac_synchoronizer/Makefile

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: MIT
+#
+# Copyright (c) 2025 FPGA Ninja, LLC
+#
+# Authors:
+# - Alex Forencich
+#
+
+# FPGA settings
+FPGA_PART = xc7a100tfgg484-2
+FPGA_TOP = sync_top
+FPGA_ARCH = artix7
+
+RTL_DIR = ../../rtl
+
+
+include ../../scripts/vivado.mk
+
+
+SYN_FILES += $(sort $(shell find ../../rtl/sampler/src -type f -name '*.sv'))
+SYN_FILES += $(sort $(shell find ../../rtl/generator/src -type f -name '*.sv'))
+SYN_FILES += sync_top.sv
+
+XCI_FILES += $(sort $(shell find ip/ -type f -name '*.xci'))
+
+XDC_FILES += ../../constraints/ax7102.xdc
+XDC_FILES += debug.xdc
+
+SYN_FILES += tb_sync_top.sv
+SIM_TOP = tb_top
+
+
+
+program: $(PROJECT).bit
+	echo "open_hw_manager" > program.tcl
+	echo "connect_hw_server" >> program.tcl
+	echo "open_hw_target" >> program.tcl
+	echo "current_hw_device [lindex [get_hw_devices] 0]" >> program.tcl
+	echo "refresh_hw_device -update_hw_probes false [current_hw_device]" >> program.tcl
+	echo "set_property PROGRAM.FILE {$(PROJECT).bit} [current_hw_device]" >> program.tcl
+	echo "program_hw_devices [current_hw_device]" >> program.tcl
+	echo "exit" >> program.tcl
+	vivado -nojournal -nolog -mode batch -source program.tcl
+
+$(PROJECT).mcs $(PROJECT).prm: $(PROJECT).bit
+	echo "write_cfgmem -force -format mcs -size 16 -interface SPIx4 -loadbit {up 0x0000000 $*.bit} -checksum -file $*.mcs" > generate_mcs.tcl
+	echo "exit" >> generate_mcs.tcl
+	vivado -nojournal -nolog -mode batch -source generate_mcs.tcl
+	mkdir -p rev
+	COUNT=100; \
+	while [ -e rev/$*_rev$$COUNT.bit ]; \
+	do COUNT=$$((COUNT+1)); done; \
+	COUNT=$$((COUNT-1)); \
+	for x in .mcs .prm; \
+	do cp $*$$x rev/$*_rev$$COUNT$$x; \
+	echo "Output: rev/$*_rev$$COUNT$$x"; done;

designs/adc_dac_synchoronizer/debug.xdc

@@ -0,0 +1,10 @@
+# Primary clocks
+create_clock -name eth_clk -period 8.000  [get_ports dac_clk_in]
+create_clock -name acc_clk -period 15.385  [get_ports adc_clk_in]
+
+
+# Asynchronous clock groups
+
+set_clock_groups -name ASYNC_ETH_ACC -asynchronous \
+    -group [get_clocks eth_clk] \
+    -group [get_clocks acc_clk]

designs/adc_dac_synchoronizer/sync_top.sv

@@ -0,0 +1,136 @@
+`timescale 1ns / 1ps
+
+module sync_top
+#(
+    parameter int unsigned DAC_DATA_WIDTH = 14,
+    parameter int unsigned ADC_DATA_WIDTH = 12,
+    parameter int unsigned PACK_FACTOR    = 1,
+    parameter int unsigned PROCESS_MODE   = 0
+)
+(
+    input  adc_clk_in,
+    input  adc_rst,
+
+    input  dac_clk_in,
+    input  dac_rst,
+
+    input  dac_start,
+
+    input  [31:0]                 pulse_width,
+    input  [31:0]                 pulse_period,
+    input  [DAC_DATA_WIDTH-1:0]   pulse_height,
+    input  [15:0]                 pulse_num,
+    input  [31:0]                 smp_num,
+
+    output logic [ADC_DATA_WIDTH*PACK_FACTOR-1:0] m_axis_tdata,
+    output logic                                  m_axis_tvalid
+);
+
+    //------------------------------------------------------------
+    // Internal signals
+    //------------------------------------------------------------
+
+   (* MARK_DEBUG="true" *) logic sample_req;
+   (* MARK_DEBUG="true" *) logic sample_req_sync1;
+   (* MARK_DEBUG="true" *) logic sample_req_sync2;
+   (* MARK_DEBUG="true" *) logic sample_req_sync3;
+
+   (* MARK_DEBUG="true" *) logic sample_done;
+   (* MARK_DEBUG="true" *) logic sample_done_sync1;
+   (* MARK_DEBUG="true" *) logic sample_done_sync2;
+   (* MARK_DEBUG="true" *) logic sample_done_sync3;
+
+   (* MARK_DEBUG="true" *) logic pulse;
+   (* MARK_DEBUG="true" *) logic [DAC_DATA_WIDTH-1:0] pulse_height_out;
+
+    //------------------------------------------------------------
+    // Simple DAC -> ADC test source
+    //
+    // generator output is directly connected to sampler input
+    // with width truncation:
+    //
+    // pulse_height_out[13:0] -> data_in[11:0]
+    //------------------------------------------------------------
+  (* MARK_DEBUG="true" *)  logic [ADC_DATA_WIDTH-1:0] data_in;
+  (* MARK_DEBUG="true" *)  logic out_of_range;
+
+    assign data_in      = pulse_height_out[ADC_DATA_WIDTH-1:0];
+    assign out_of_range = 1'b0;
+
+    //------------------------------------------------------------
+    // DAC -> ADC CDC
+    //------------------------------------------------------------
+    always_ff @(posedge adc_clk_in or posedge adc_rst) begin
+        if (adc_rst) begin
+            sample_req <= 1'b0;
+            sample_req_sync2  <= 1'b0;
+            sample_req_sync3 <= 1'b0;
+        end
+        else begin
+            sample_req_sync2 <= sample_req_sync1;
+            sample_req_sync3  <= sample_req_sync2;
+            sample_req <= sample_req_sync3;
+        end
+    end
+
+    //------------------------------------------------------------
+    // ADC -> DAC CDC
+    //------------------------------------------------------------
+    always_ff @(posedge dac_clk_in or posedge dac_rst) begin
+        if (dac_rst) begin
+            sample_done <= 1'b0;
+            sample_done_sync2 <= 1'b0;
+            sample_done_sync3 <= 1'b0;
+        end
+        else begin
+            sample_done_sync2 <= sample_done_sync1;
+            sample_done_sync3 <= sample_done_sync2;
+            sample_done <= sample_done_sync3;
+        end
+    end
+
+    //------------------------------------------------------------
+    // Generator
+    //------------------------------------------------------------
+    generator #(
+        .DATA_WIDTH(DAC_DATA_WIDTH)
+    ) generator_inst (
+        .clk_in(dac_clk_in),
+        .rst(dac_rst),
+        .start(dac_start),
+
+        .pulse_width(pulse_width),
+        .pulse_period(pulse_period),
+        .pulse_height(pulse_height),
+        .pulse_num(pulse_num),
+
+        .sample_done(sample_done),
+
+        .pulse(pulse),
+        .pulse_height_out(pulse_height_out),
+        .sample_req(sample_req_sync1)
+    );
+
+    //------------------------------------------------------------
+    // Sampler
+    //------------------------------------------------------------
+    sampler #(
+        .DATA_WIDTH(ADC_DATA_WIDTH),
+        .PACK_FACTOR(PACK_FACTOR),
+        .PROCESS_MODE(PROCESS_MODE)
+    ) sampler_inst (
+        .clk_in(adc_clk_in),
+        .rst(adc_rst),
+
+        .data_in(data_in),
+        .out_of_range(out_of_range),
+
+        .smp_num(smp_num),
+        .sample_req(sample_req),
+
+        .m_axis_tdata(m_axis_tdata),
+        .m_axis_tvalid(m_axis_tvalid),
+        .sample_done(sample_done_sync1)
+    );
+
+endmodule

designs/adc_dac_synchoronizer/tb_sync_top.sv

@@ -0,0 +1,169 @@
+`timescale 1ns / 1ps
+
+module tb_top;
+
+    localparam DAC_DATA_WIDTH = 14;
+    localparam ADC_DATA_WIDTH = 12;
+    localparam PACK_FACTOR    = 1;
+    localparam PROCESS_MODE   = 0;
+
+    //------------------------------------------------------------
+    // clocks / reset
+    //------------------------------------------------------------
+    logic adc_clk_in;
+    logic adc_rst;
+
+    logic dac_clk_in;
+    logic dac_rst;
+
+    //------------------------------------------------------------
+    // control
+    //------------------------------------------------------------
+    logic dac_start;
+
+    logic [31:0] pulse_width;
+    logic [31:0] pulse_period;
+    logic [DAC_DATA_WIDTH-1:0] pulse_height;
+    logic [15:0] pulse_num;
+    logic [31:0] smp_num;
+
+    //------------------------------------------------------------
+    // outputs
+    //------------------------------------------------------------
+    logic [ADC_DATA_WIDTH*PACK_FACTOR-1:0] m_axis_tdata;
+    logic                                  m_axis_tvalid;
+
+    integer valid_count;
+
+    //------------------------------------------------------------
+    // DUT
+    //------------------------------------------------------------
+    sync_top #(
+        .DAC_DATA_WIDTH(DAC_DATA_WIDTH),
+        .ADC_DATA_WIDTH(ADC_DATA_WIDTH),
+        .PACK_FACTOR(PACK_FACTOR),
+        .PROCESS_MODE(PROCESS_MODE)
+    ) dut (
+        .adc_clk_in(adc_clk_in),
+        .adc_rst(adc_rst),
+
+        .dac_clk_in(dac_clk_in),
+        .dac_rst(dac_rst),
+
+        .dac_start(dac_start),
+
+        .pulse_width(pulse_width),
+        .pulse_period(pulse_period),
+        .pulse_height(pulse_height),
+        .pulse_num(pulse_num),
+        .smp_num(smp_num),
+
+        .m_axis_tdata(m_axis_tdata),
+        .m_axis_tvalid(m_axis_tvalid)
+    );
+
+    //------------------------------------------------------------
+    // ADC clock
+    //------------------------------------------------------------
+    initial begin
+        adc_clk_in = 1'b0;
+        forever #5 adc_clk_in = ~adc_clk_in;   // 100 MHz
+    end
+
+    //------------------------------------------------------------
+    // DAC clock
+    //------------------------------------------------------------
+    initial begin
+        dac_clk_in = 1'b0;
+        forever #8 dac_clk_in = ~dac_clk_in;   // slower domain
+    end
+
+    //------------------------------------------------------------
+    // monitor output stream
+    //------------------------------------------------------------
+    always @(posedge adc_clk_in) begin
+        if (m_axis_tvalid) begin
+            valid_count = valid_count + 1;
+
+            $display("[%0t] VALID: data=%0d",
+                     $time,
+                     m_axis_tdata);
+        end
+    end
+
+    //------------------------------------------------------------
+    // test
+    //------------------------------------------------------------
+    initial begin
+
+        adc_rst      = 1'b1;
+        dac_rst      = 1'b1;
+
+        dac_start    = 1'b0;
+
+        pulse_width  = 0;
+        pulse_period = 0;
+        pulse_height = 0;
+        pulse_num    = 0;
+        smp_num      = 0;
+
+        valid_count  = 0;
+
+        //--------------------------------------------------------
+        // reset
+        //--------------------------------------------------------
+        repeat (10) @(posedge adc_clk_in);
+        repeat (10) @(posedge dac_clk_in);
+
+        adc_rst = 1'b0;
+        dac_rst = 1'b0;
+
+        repeat (5) @(posedge dac_clk_in);
+
+        //--------------------------------------------------------
+        // config
+        //--------------------------------------------------------
+        pulse_width  = 32'd3;
+        pulse_period = 32'd8;
+        pulse_height = 14'd200;
+        pulse_num    = 16'd4;
+        smp_num      = 32'd8;
+
+        //--------------------------------------------------------
+        // start
+        //--------------------------------------------------------
+        @(posedge dac_clk_in);
+        dac_start = 1'b1;
+
+        @(posedge dac_clk_in);
+        dac_start = 1'b0;
+
+        $display("==================================");
+        $display("TEST START");
+        $display("==================================");
+
+        //--------------------------------------------------------
+        // wait
+        //--------------------------------------------------------
+        repeat (600) @(posedge adc_clk_in);
+
+        //--------------------------------------------------------
+        // check
+        //--------------------------------------------------------
+        if (valid_count > 0) begin
+            $display("==================================");
+            $display("TEST PASSED");
+            $display("valid_count = %0d", valid_count);
+            $display("==================================");
+        end
+        else begin
+            $display("==================================");
+            $display("TEST FAILED");
+            $display("No valid output detected");
+            $display("==================================");
+        end
+
+        $finish;
+    end
+
+endmodule

designs/eth_ctrl_debug/README.md

@@ -1,7 +0,0 @@
-# Тестовый проект Eth + CTRL
-Проект состоит из AXIS Ethernet и контроллера. Для тестирования сделано три разных частотных домена: ethernet 125MHz, DAC 130MHz, ADC 65MHz для тестирования сихронизации. Есть ILA на все выходы контроллера и на шину AXIS eth -> ctrl. Для отправки пакетов используйте скрипт ```console.py --debug```.
-
-## Сборка
-```make all``` - собрать все до битстрима
-
-```make vivado``` - открыть проект в Vivado

designs/eth_ctrl_debug/debug.xdc

@@ -1,147 +0,0 @@
-set_clock_groups -name ASYNC_UDP_CTRL -asynchronous -group [get_clocks rgmii_rxc] -group [get_clocks clk_out1_clk_wiz_ctrl_inst] -group [get_clocks clk_out2_clk_wiz_ctrl_inst]
-
-
-
-
-create_debug_core u_ila_0 ila
-set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_0]
-set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_0]
-set_property C_ADV_TRIGGER false [get_debug_cores u_ila_0]
-set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_0]
-set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_0]
-set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_0]
-set_property C_TRIGIN_EN false [get_debug_cores u_ila_0]
-set_property C_TRIGOUT_EN false [get_debug_cores u_ila_0]
-set_property port_width 1 [get_debug_ports u_ila_0/clk]
-connect_debug_port u_ila_0/clk [get_nets [list clk_wiz_ctrl_inst/inst/clk_out2]]
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe0]
-set_property port_width 32 [get_debug_ports u_ila_0/probe0]
-connect_debug_port u_ila_0/probe0 [get_nets [list {adc_pulse_period_dbg[0]} {adc_pulse_period_dbg[1]} {adc_pulse_period_dbg[2]} {adc_pulse_period_dbg[3]} {adc_pulse_period_dbg[4]} {adc_pulse_period_dbg[5]} {adc_pulse_period_dbg[6]} {adc_pulse_period_dbg[7]} {adc_pulse_period_dbg[8]} {adc_pulse_period_dbg[9]} {adc_pulse_period_dbg[10]} {adc_pulse_period_dbg[11]} {adc_pulse_period_dbg[12]} {adc_pulse_period_dbg[13]} {adc_pulse_period_dbg[14]} {adc_pulse_period_dbg[15]} {adc_pulse_period_dbg[16]} {adc_pulse_period_dbg[17]} {adc_pulse_period_dbg[18]} {adc_pulse_period_dbg[19]} {adc_pulse_period_dbg[20]} {adc_pulse_period_dbg[21]} {adc_pulse_period_dbg[22]} {adc_pulse_period_dbg[23]} {adc_pulse_period_dbg[24]} {adc_pulse_period_dbg[25]} {adc_pulse_period_dbg[26]} {adc_pulse_period_dbg[27]} {adc_pulse_period_dbg[28]} {adc_pulse_period_dbg[29]} {adc_pulse_period_dbg[30]} {adc_pulse_period_dbg[31]}]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe1]
-set_property port_width 8 [get_debug_ports u_ila_0/probe1]
-connect_debug_port u_ila_0/probe1 [get_nets [list {finish_cnt[0]} {finish_cnt[1]} {finish_cnt[2]} {finish_cnt[3]} {finish_cnt[4]} {finish_cnt[5]} {finish_cnt[6]} {finish_cnt[7]}]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe2]
-set_property port_width 16 [get_debug_ports u_ila_0/probe2]
-connect_debug_port u_ila_0/probe2 [get_nets [list {adc_pulse_num_dbg[0]} {adc_pulse_num_dbg[1]} {adc_pulse_num_dbg[2]} {adc_pulse_num_dbg[3]} {adc_pulse_num_dbg[4]} {adc_pulse_num_dbg[5]} {adc_pulse_num_dbg[6]} {adc_pulse_num_dbg[7]} {adc_pulse_num_dbg[8]} {adc_pulse_num_dbg[9]} {adc_pulse_num_dbg[10]} {adc_pulse_num_dbg[11]} {adc_pulse_num_dbg[12]} {adc_pulse_num_dbg[13]} {adc_pulse_num_dbg[14]} {adc_pulse_num_dbg[15]}]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe3]
-set_property port_width 1 [get_debug_ports u_ila_0/probe3]
-connect_debug_port u_ila_0/probe3 [get_nets [list adc_rst_dbg]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe4]
-set_property port_width 1 [get_debug_ports u_ila_0/probe4]
-connect_debug_port u_ila_0/probe4 [get_nets [list adc_start_dbg]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe5]
-set_property port_width 1 [get_debug_ports u_ila_0/probe5]
-connect_debug_port u_ila_0/probe5 [get_nets [list finish_dbg]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe6]
-set_property port_width 1 [get_debug_ports u_ila_0/probe6]
-connect_debug_port u_ila_0/probe6 [get_nets [list finish_pending]]
-create_debug_core u_ila_1 ila
-set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_1]
-set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_1]
-set_property C_ADV_TRIGGER false [get_debug_cores u_ila_1]
-set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_1]
-set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_1]
-set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_1]
-set_property C_TRIGIN_EN false [get_debug_cores u_ila_1]
-set_property C_TRIGOUT_EN false [get_debug_cores u_ila_1]
-set_property port_width 1 [get_debug_ports u_ila_1/clk]
-connect_debug_port u_ila_1/clk [get_nets [list rgmii_rxc_IBUF_BUFG]]
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe0]
-set_property port_width 2 [get_debug_ports u_ila_1/probe0]
-connect_debug_port u_ila_1/probe0 [get_nets [list {axis_mac0/rx_state[0]} {axis_mac0/rx_state[1]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe1]
-set_property port_width 16 [get_debug_ports u_ila_1/probe1]
-connect_debug_port u_ila_1/probe1 [get_nets [list {axis_mac0/udp_rec_data_length[0]} {axis_mac0/udp_rec_data_length[1]} {axis_mac0/udp_rec_data_length[2]} {axis_mac0/udp_rec_data_length[3]} {axis_mac0/udp_rec_data_length[4]} {axis_mac0/udp_rec_data_length[5]} {axis_mac0/udp_rec_data_length[6]} {axis_mac0/udp_rec_data_length[7]} {axis_mac0/udp_rec_data_length[8]} {axis_mac0/udp_rec_data_length[9]} {axis_mac0/udp_rec_data_length[10]} {axis_mac0/udp_rec_data_length[11]} {axis_mac0/udp_rec_data_length[12]} {axis_mac0/udp_rec_data_length[13]} {axis_mac0/udp_rec_data_length[14]} {axis_mac0/udp_rec_data_length[15]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe2]
-set_property port_width 96 [get_debug_ports u_ila_1/probe2]
-connect_debug_port u_ila_1/probe2 [get_nets [list {udp_ctrl_inst/cfg_bus_eth[0]} {udp_ctrl_inst/cfg_bus_eth[1]} {udp_ctrl_inst/cfg_bus_eth[2]} {udp_ctrl_inst/cfg_bus_eth[3]} {udp_ctrl_inst/cfg_bus_eth[4]} {udp_ctrl_inst/cfg_bus_eth[5]} {udp_ctrl_inst/cfg_bus_eth[6]} {udp_ctrl_inst/cfg_bus_eth[7]} {udp_ctrl_inst/cfg_bus_eth[8]} {udp_ctrl_inst/cfg_bus_eth[9]} {udp_ctrl_inst/cfg_bus_eth[10]} {udp_ctrl_inst/cfg_bus_eth[11]} {udp_ctrl_inst/cfg_bus_eth[12]} {udp_ctrl_inst/cfg_bus_eth[13]} {udp_ctrl_inst/cfg_bus_eth[14]} {udp_ctrl_inst/cfg_bus_eth[15]} {udp_ctrl_inst/cfg_bus_eth[16]} {udp_ctrl_inst/cfg_bus_eth[17]} {udp_ctrl_inst/cfg_bus_eth[18]} {udp_ctrl_inst/cfg_bus_eth[19]} {udp_ctrl_inst/cfg_bus_eth[20]} {udp_ctrl_inst/cfg_bus_eth[21]} {udp_ctrl_inst/cfg_bus_eth[22]} {udp_ctrl_inst/cfg_bus_eth[23]} {udp_ctrl_inst/cfg_bus_eth[24]} {udp_ctrl_inst/cfg_bus_eth[25]} {udp_ctrl_inst/cfg_bus_eth[26]} {udp_ctrl_inst/cfg_bus_eth[27]} {udp_ctrl_inst/cfg_bus_eth[28]} {udp_ctrl_inst/cfg_bus_eth[29]} {udp_ctrl_inst/cfg_bus_eth[30]} {udp_ctrl_inst/cfg_bus_eth[31]} {udp_ctrl_inst/cfg_bus_eth[32]} {udp_ctrl_inst/cfg_bus_eth[33]} {udp_ctrl_inst/cfg_bus_eth[34]} {udp_ctrl_inst/cfg_bus_eth[35]} {udp_ctrl_inst/cfg_bus_eth[36]} {udp_ctrl_inst/cfg_bus_eth[37]} {udp_ctrl_inst/cfg_bus_eth[38]} {udp_ctrl_inst/cfg_bus_eth[39]} {udp_ctrl_inst/cfg_bus_eth[40]} {udp_ctrl_inst/cfg_bus_eth[41]} {udp_ctrl_inst/cfg_bus_eth[42]} {udp_ctrl_inst/cfg_bus_eth[43]} {udp_ctrl_inst/cfg_bus_eth[44]} {udp_ctrl_inst/cfg_bus_eth[45]} {udp_ctrl_inst/cfg_bus_eth[46]} {udp_ctrl_inst/cfg_bus_eth[47]} {udp_ctrl_inst/cfg_bus_eth[48]} {udp_ctrl_inst/cfg_bus_eth[49]} {udp_ctrl_inst/cfg_bus_eth[50]} {udp_ctrl_inst/cfg_bus_eth[51]} {udp_ctrl_inst/cfg_bus_eth[52]} {udp_ctrl_inst/cfg_bus_eth[53]} {udp_ctrl_inst/cfg_bus_eth[54]} {udp_ctrl_inst/cfg_bus_eth[55]} {udp_ctrl_inst/cfg_bus_eth[56]} {udp_ctrl_inst/cfg_bus_eth[57]} {udp_ctrl_inst/cfg_bus_eth[58]} {udp_ctrl_inst/cfg_bus_eth[59]} {udp_ctrl_inst/cfg_bus_eth[60]} {udp_ctrl_inst/cfg_bus_eth[61]} {udp_ctrl_inst/cfg_bus_eth[62]} {udp_ctrl_inst/cfg_bus_eth[63]} {udp_ctrl_inst/cfg_bus_eth[64]} {udp_ctrl_inst/cfg_bus_eth[65]} {udp_ctrl_inst/cfg_bus_eth[66]} {udp_ctrl_inst/cfg_bus_eth[67]} {udp_ctrl_inst/cfg_bus_eth[68]} {udp_ctrl_inst/cfg_bus_eth[69]} {udp_ctrl_inst/cfg_bus_eth[70]} {udp_ctrl_inst/cfg_bus_eth[71]} {udp_ctrl_inst/cfg_bus_eth[72]} {udp_ctrl_inst/cfg_bus_eth[73]} {udp_ctrl_inst/cfg_bus_eth[74]} {udp_ctrl_inst/cfg_bus_eth[75]} {udp_ctrl_inst/cfg_bus_eth[76]} {udp_ctrl_inst/cfg_bus_eth[77]} {udp_ctrl_inst/cfg_bus_eth[78]} {udp_ctrl_inst/cfg_bus_eth[79]} {udp_ctrl_inst/cfg_bus_eth[80]} {udp_ctrl_inst/cfg_bus_eth[81]} {udp_ctrl_inst/cfg_bus_eth[82]} {udp_ctrl_inst/cfg_bus_eth[83]} {udp_ctrl_inst/cfg_bus_eth[84]} {udp_ctrl_inst/cfg_bus_eth[85]} {udp_ctrl_inst/cfg_bus_eth[86]} {udp_ctrl_inst/cfg_bus_eth[87]} {udp_ctrl_inst/cfg_bus_eth[88]} {udp_ctrl_inst/cfg_bus_eth[89]} {udp_ctrl_inst/cfg_bus_eth[90]} {udp_ctrl_inst/cfg_bus_eth[91]} {udp_ctrl_inst/cfg_bus_eth[92]} {udp_ctrl_inst/cfg_bus_eth[93]} {udp_ctrl_inst/cfg_bus_eth[94]} {udp_ctrl_inst/cfg_bus_eth[95]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe3]
-set_property port_width 16 [get_debug_ports u_ila_1/probe3]
-connect_debug_port u_ila_1/probe3 [get_nets [list {axis_mac0/rx_payload_len[0]} {axis_mac0/rx_payload_len[1]} {axis_mac0/rx_payload_len[2]} {axis_mac0/rx_payload_len[3]} {axis_mac0/rx_payload_len[4]} {axis_mac0/rx_payload_len[5]} {axis_mac0/rx_payload_len[6]} {axis_mac0/rx_payload_len[7]} {axis_mac0/rx_payload_len[8]} {axis_mac0/rx_payload_len[9]} {axis_mac0/rx_payload_len[10]} {axis_mac0/rx_payload_len[11]} {axis_mac0/rx_payload_len[12]} {axis_mac0/rx_payload_len[13]} {axis_mac0/rx_payload_len[14]} {axis_mac0/rx_payload_len[15]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe4]
-set_property port_width 8 [get_debug_ports u_ila_1/probe4]
-connect_debug_port u_ila_1/probe4 [get_nets [list {m_axis_rx_tdata[0]} {m_axis_rx_tdata[1]} {m_axis_rx_tdata[2]} {m_axis_rx_tdata[3]} {m_axis_rx_tdata[4]} {m_axis_rx_tdata[5]} {m_axis_rx_tdata[6]} {m_axis_rx_tdata[7]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe5]
-set_property port_width 3 [get_debug_ports u_ila_1/probe5]
-connect_debug_port u_ila_1/probe5 [get_nets [list {udp_ctrl_inst/eth_state[0]} {udp_ctrl_inst/eth_state[1]} {udp_ctrl_inst/eth_state[2]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe6]
-set_property port_width 1 [get_debug_ports u_ila_1/probe6]
-connect_debug_port u_ila_1/probe6 [get_nets [list axis_mac0/arp_found]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe7]
-set_property port_width 1 [get_debug_ports u_ila_1/probe7]
-connect_debug_port u_ila_1/probe7 [get_nets [list udp_ctrl_inst/axis_hs]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe8]
-set_property port_width 1 [get_debug_ports u_ila_1/probe8]
-connect_debug_port u_ila_1/probe8 [get_nets [list udp_ctrl_inst/busy_flag_eth]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe9]
-set_property port_width 1 [get_debug_ports u_ila_1/probe9]
-connect_debug_port u_ila_1/probe9 [get_nets [list axis_mac0/m_axis_rx_tlast]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe10]
-set_property port_width 1 [get_debug_ports u_ila_1/probe10]
-connect_debug_port u_ila_1/probe10 [get_nets [list m_axis_rx_tlast]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe11]
-set_property port_width 1 [get_debug_ports u_ila_1/probe11]
-connect_debug_port u_ila_1/probe11 [get_nets [list axis_mac0/m_axis_rx_tready]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe12]
-set_property port_width 1 [get_debug_ports u_ila_1/probe12]
-connect_debug_port u_ila_1/probe12 [get_nets [list m_axis_rx_tready]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe13]
-set_property port_width 1 [get_debug_ports u_ila_1/probe13]
-connect_debug_port u_ila_1/probe13 [get_nets [list axis_mac0/req_ready]]
-create_debug_core u_ila_2 ila
-set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_2]
-set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_2]
-set_property C_ADV_TRIGGER false [get_debug_cores u_ila_2]
-set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_2]
-set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_2]
-set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_2]
-set_property C_TRIGIN_EN false [get_debug_cores u_ila_2]
-set_property C_TRIGOUT_EN false [get_debug_cores u_ila_2]
-set_property port_width 1 [get_debug_ports u_ila_2/clk]
-connect_debug_port u_ila_2/clk [get_nets [list clk_wiz_ctrl_inst/inst/clk_out1]]
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe0]
-set_property port_width 12 [get_debug_ports u_ila_2/probe0]
-connect_debug_port u_ila_2/probe0 [get_nets [list {dac_pulse_height_dbg[0]} {dac_pulse_height_dbg[1]} {dac_pulse_height_dbg[2]} {dac_pulse_height_dbg[3]} {dac_pulse_height_dbg[4]} {dac_pulse_height_dbg[5]} {dac_pulse_height_dbg[6]} {dac_pulse_height_dbg[7]} {dac_pulse_height_dbg[8]} {dac_pulse_height_dbg[9]} {dac_pulse_height_dbg[10]} {dac_pulse_height_dbg[11]}]]
-create_debug_port u_ila_2 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe1]
-set_property port_width 16 [get_debug_ports u_ila_2/probe1]
-connect_debug_port u_ila_2/probe1 [get_nets [list {dac_pulse_num_dbg[0]} {dac_pulse_num_dbg[1]} {dac_pulse_num_dbg[2]} {dac_pulse_num_dbg[3]} {dac_pulse_num_dbg[4]} {dac_pulse_num_dbg[5]} {dac_pulse_num_dbg[6]} {dac_pulse_num_dbg[7]} {dac_pulse_num_dbg[8]} {dac_pulse_num_dbg[9]} {dac_pulse_num_dbg[10]} {dac_pulse_num_dbg[11]} {dac_pulse_num_dbg[12]} {dac_pulse_num_dbg[13]} {dac_pulse_num_dbg[14]} {dac_pulse_num_dbg[15]}]]
-create_debug_port u_ila_2 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe2]
-set_property port_width 32 [get_debug_ports u_ila_2/probe2]
-connect_debug_port u_ila_2/probe2 [get_nets [list {dac_pulse_period_dbg[0]} {dac_pulse_period_dbg[1]} {dac_pulse_period_dbg[2]} {dac_pulse_period_dbg[3]} {dac_pulse_period_dbg[4]} {dac_pulse_period_dbg[5]} {dac_pulse_period_dbg[6]} {dac_pulse_period_dbg[7]} {dac_pulse_period_dbg[8]} {dac_pulse_period_dbg[9]} {dac_pulse_period_dbg[10]} {dac_pulse_period_dbg[11]} {dac_pulse_period_dbg[12]} {dac_pulse_period_dbg[13]} {dac_pulse_period_dbg[14]} {dac_pulse_period_dbg[15]} {dac_pulse_period_dbg[16]} {dac_pulse_period_dbg[17]} {dac_pulse_period_dbg[18]} {dac_pulse_period_dbg[19]} {dac_pulse_period_dbg[20]} {dac_pulse_period_dbg[21]} {dac_pulse_period_dbg[22]} {dac_pulse_period_dbg[23]} {dac_pulse_period_dbg[24]} {dac_pulse_period_dbg[25]} {dac_pulse_period_dbg[26]} {dac_pulse_period_dbg[27]} {dac_pulse_period_dbg[28]} {dac_pulse_period_dbg[29]} {dac_pulse_period_dbg[30]} {dac_pulse_period_dbg[31]}]]
-create_debug_port u_ila_2 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe3]
-set_property port_width 32 [get_debug_ports u_ila_2/probe3]
-connect_debug_port u_ila_2/probe3 [get_nets [list {dac_pulse_width_dbg[0]} {dac_pulse_width_dbg[1]} {dac_pulse_width_dbg[2]} {dac_pulse_width_dbg[3]} {dac_pulse_width_dbg[4]} {dac_pulse_width_dbg[5]} {dac_pulse_width_dbg[6]} {dac_pulse_width_dbg[7]} {dac_pulse_width_dbg[8]} {dac_pulse_width_dbg[9]} {dac_pulse_width_dbg[10]} {dac_pulse_width_dbg[11]} {dac_pulse_width_dbg[12]} {dac_pulse_width_dbg[13]} {dac_pulse_width_dbg[14]} {dac_pulse_width_dbg[15]} {dac_pulse_width_dbg[16]} {dac_pulse_width_dbg[17]} {dac_pulse_width_dbg[18]} {dac_pulse_width_dbg[19]} {dac_pulse_width_dbg[20]} {dac_pulse_width_dbg[21]} {dac_pulse_width_dbg[22]} {dac_pulse_width_dbg[23]} {dac_pulse_width_dbg[24]} {dac_pulse_width_dbg[25]} {dac_pulse_width_dbg[26]} {dac_pulse_width_dbg[27]} {dac_pulse_width_dbg[28]} {dac_pulse_width_dbg[29]} {dac_pulse_width_dbg[30]} {dac_pulse_width_dbg[31]}]]
-create_debug_port u_ila_2 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe4]
-set_property port_width 1 [get_debug_ports u_ila_2/probe4]
-connect_debug_port u_ila_2/probe4 [get_nets [list dac_rst_dbg]]
-create_debug_port u_ila_2 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe5]
-set_property port_width 1 [get_debug_ports u_ila_2/probe5]
-connect_debug_port u_ila_2/probe5 [get_nets [list dac_start_dbg]]
-set_property C_CLK_INPUT_FREQ_HZ 300000000 [get_debug_cores dbg_hub]
-set_property C_ENABLE_CLK_DIVIDER false [get_debug_cores dbg_hub]
-set_property C_USER_SCAN_CHAIN 1 [get_debug_cores dbg_hub]
-connect_debug_port dbg_hub/clk [get_nets dac_clk]

designs/eth_ctrl_debug/eth_ctrl_debug.sv

@@ -1,298 +0,0 @@
-`timescale 1 ns / 1 ns
-
-module eth_ctrl_debug_top #(
-    parameter int unsigned DAC_DATA_WIDTH = 12
-)(
-    input               sys_clk_p,
-    input               sys_clk_n,
-    input               rst_n,
-
-    output [3:0]        led,
-
-    output              e_reset,
-    output              e_mdc,
-    inout               e_mdio,
-
-    output [3:0]        rgmii_txd,
-    output              rgmii_txctl,
-    output              rgmii_txc,
-    input  [3:0]        rgmii_rxd,
-    input               rgmii_rxctl,
-    input               rgmii_rxc
-);
-
-    // -------------------------------------------------------------------------
-    // Internal GMII-side signals
-    // -------------------------------------------------------------------------
-    wire  [7:0] gmii_txd;
-    wire        gmii_tx_en;
-    wire        gmii_tx_er;
-    wire        gmii_tx_clk;
-    wire        gmii_crs;
-    wire        gmii_col;
-    wire  [7:0] gmii_rxd_i;
-    wire        gmii_rx_dv;
-    wire        gmii_rx_er;
-    wire        gmii_rx_clk;
-
-    wire [31:0] pack_total_len;
-
-    wire        e_rx_dv;
-    wire [7:0]  e_rxd;
-    wire        e_tx_en;
-    wire [7:0]  e_txd;
-    wire        e_rst_n;
-    wire        sys_clk;
-
-    wire        duplex_mode;
-
-    assign duplex_mode = 1'b1;
-
-    // -------------------------------------------------------------------------
-    // System clock buffer (200 MHz differential input)
-    // -------------------------------------------------------------------------
-    IBUFDS sys_clk_ibufgds (
-        .O  (sys_clk),
-        .I  (sys_clk_p),
-        .IB (sys_clk_n)
-    );
-
-    // -------------------------------------------------------------------------
-    // IDELAYCTRL
-    // -------------------------------------------------------------------------
-    (* IODELAY_GROUP = "rgmii_idelay_group" *)
-    IDELAYCTRL IDELAYCTRL_inst (
-        .RDY    (),
-        .REFCLK (sys_clk),
-        .RST    (1'b0)
-    );
-
-    // -------------------------------------------------------------------------
-    // Generated clocks for controller
-    // Need to create this IP in Vivado:
-    //  input : 200 MHz
-    //  output0: 130 MHz
-    //  output1: 65 MHz
-    // -------------------------------------------------------------------------
-    wire dac_clk;
-    wire adc_clk;
-    wire clk_wiz_locked;
-
-    clk_wiz_ctrl_inst clk_wiz_ctrl_inst (
-        .clk_in1   (sys_clk),
-        .reset    (~rst_n),
-        .clk_out1  (dac_clk),   // 130 MHz
-        .clk_out2  (adc_clk),   // 65 MHz
-        .locked    (clk_wiz_locked)
-    );
-
-    // -------------------------------------------------------------------------
-    // GMII <-> RGMII conversion
-    // -------------------------------------------------------------------------
-    util_gmii_to_rgmii util_gmii_to_rgmii_m0 (
-        .reset           (1'b0),
-        .rgmii_td        (rgmii_txd),
-        .rgmii_tx_ctl    (rgmii_txctl),
-        .rgmii_txc       (rgmii_txc),
-        .rgmii_rd        (rgmii_rxd),
-        .rgmii_rx_ctl    (rgmii_rxctl),
-        .gmii_rx_clk     (gmii_rx_clk),
-        .gmii_txd        (e_txd),
-        .gmii_tx_en      (e_tx_en),
-        .gmii_tx_er      (1'b0),
-        .gmii_tx_clk     (gmii_tx_clk),
-        .gmii_crs        (gmii_crs),
-        .gmii_col        (gmii_col),
-        .gmii_rxd        (gmii_rxd_i),
-        .rgmii_rxc       (rgmii_rxc),
-        .gmii_rx_dv      (gmii_rx_dv),
-        .gmii_rx_er      (gmii_rx_er),
-        .speed_selection (2'b10),
-        .duplex_mode     (duplex_mode)
-    );
-
-    // -------------------------------------------------------------------------
-    // GMII arbitration / adaptation
-    // -------------------------------------------------------------------------
-    gmii_arbi arbi_inst (
-        .clk            (gmii_tx_clk),
-        .rst_n          (rst_n),
-        .speed          (2'b10),
-        .link           (1'b1),
-        .pack_total_len (pack_total_len),
-        .e_rst_n        (e_rst_n),
-        .gmii_rx_dv     (gmii_rx_dv),
-        .gmii_rxd       (gmii_rxd_i),
-        .gmii_tx_en     (gmii_tx_en),
-        .gmii_txd       (gmii_txd),
-        .e_rx_dv        (e_rx_dv),
-        .e_rxd          (e_rxd),
-        .e_tx_en        (e_tx_en),
-        .e_txd          (e_txd)
-    );
-
-    // -------------------------------------------------------------------------
-    // axis_mac interface
-    // RX stream from Ethernet goes into controller
-    // TX stream is unused for now
-    // -------------------------------------------------------------------------
-    wire        req_ready;
-
-    reg         send_req;
-    reg  [15:0] data_length;
-
-    reg  [7:0]  s_axis_tx_tdata;
-    reg         s_axis_tx_tvalid;
-    wire        s_axis_tx_tready;
-    reg         s_axis_tx_tlast;
-
-    (* MARK_DEBUG="true" *) wire [7:0]  m_axis_rx_tdata;
-    (* MARK_DEBUG="true" *) wire        m_axis_rx_tvalid;
-    (* MARK_DEBUG="true" *) wire        m_axis_rx_tlast;
-    (* MARK_DEBUG="true" *) wire        m_axis_rx_tready;
-
-    // Always ready to accept RX payload bytes
-    assign m_axis_rx_tready = 1'b1;
-
-    // TX disabled
-    always @(*) begin
-        send_req        = 1'b0;
-        data_length     = 16'd0;
-        s_axis_tx_tdata = 8'd0;
-        s_axis_tx_tvalid= 1'b0;
-        s_axis_tx_tlast = 1'b0;
-    end
-
-    axis_mac axis_mac0 (
-        .gmii_tx_clk       (gmii_tx_clk),
-        .gmii_rx_clk       (gmii_rx_clk),
-        .rst_n             (e_rst_n),
-
-        .gmii_rx_dv        (e_rx_dv),
-        .gmii_rxd          (e_rxd),
-        .gmii_tx_en        (gmii_tx_en),
-        .gmii_txd          (gmii_txd),
-
-        .send_req          (send_req),
-        .data_length       (data_length),
-        .req_ready         (req_ready),
-
-        .s_axis_tx_tdata   (s_axis_tx_tdata),
-        .s_axis_tx_tvalid  (s_axis_tx_tvalid),
-        .s_axis_tx_tready  (s_axis_tx_tready),
-        .s_axis_tx_tlast   (s_axis_tx_tlast),
-
-        .m_axis_rx_tdata   (m_axis_rx_tdata),
-        .m_axis_rx_tvalid  (m_axis_rx_tvalid),
-        .m_axis_rx_tready  (m_axis_rx_tready),
-        .m_axis_rx_tlast   (m_axis_rx_tlast)
-    );
-
-    // PHY reset helper from your original example
-    reset reset_m0 (
-        .clk   (sys_clk),
-        .key1  (rst_n),
-        .rst_n (e_reset)
-    );
-
-    // MDIO lines are not driven here yet
-    assign e_mdc  = 1'b0;
-    assign e_mdio = 1'bz;
-
-    // -------------------------------------------------------------------------
-    // Controller reset
-    // Use both external reset and clk_wiz lock
-    // -------------------------------------------------------------------------
-    wire ctrl_rst_n = rst_n & clk_wiz_locked;
-
-    // -------------------------------------------------------------------------
-    // Debug finish generator
-    //
-    // After each adc_start pulse generates one finish pulse after some delay.
-    // This is just for first bring-up so the controller can leave busy state
-    // If you don't want this, replace with:
-    // wire finish_dbg = 1'b0;
-    // -------------------------------------------------------------------------
-    (* MARK_DEBUG="true" *) logic        finish_dbg;
-    (* MARK_DEBUG="true" *) logic [7:0]  finish_cnt;
-    (* MARK_DEBUG="true" *) logic        finish_pending;
-
-    // Controller outputs to debug
-    (* MARK_DEBUG="true" *) wire [31:0]               dac_pulse_width_dbg;
-    (* MARK_DEBUG="true" *) wire [31:0]               dac_pulse_period_dbg;
-    (* MARK_DEBUG="true" *) wire [DAC_DATA_WIDTH-1:0] dac_pulse_height_dbg;
-    (* MARK_DEBUG="true" *) wire [15:0]               dac_pulse_num_dbg;
-
-    (* MARK_DEBUG="true" *) wire [31:0]               adc_pulse_period_dbg;
-    (* MARK_DEBUG="true" *) wire [15:0]               adc_pulse_num_dbg;
-
-    (* MARK_DEBUG="true" *) wire                      dac_start_dbg;
-    (* MARK_DEBUG="true" *) wire                      adc_start_dbg;
-    (* MARK_DEBUG="true" *) wire                      dac_rst_dbg;
-    (* MARK_DEBUG="true" *) wire                      adc_rst_dbg;
-
-    always_ff @(posedge adc_clk or negedge ctrl_rst_n) begin
-        if (!ctrl_rst_n) begin
-            finish_dbg     <= 1'b0;
-            finish_cnt     <= 8'd0;
-            finish_pending <= 1'b0;
-        end else begin
-            finish_dbg <= 1'b0;
-
-            if (adc_start_dbg) begin
-                finish_pending <= 1'b1;
-                finish_cnt     <= 8'd80;
-            end else if (finish_pending) begin
-                if (finish_cnt == 8'd0) begin
-                    finish_dbg     <= 1'b1;
-                    finish_pending <= 1'b0;
-                end else begin
-                    finish_cnt <= finish_cnt - 8'd1;
-                end
-            end
-        end
-    end
-
-    // -------------------------------------------------------------------------
-    // Controller
-    // ETH domain = gmii_rx_clk, because RX AXI master comes from axis_mac RX side
-    // -------------------------------------------------------------------------
-    control #(
-        .DAC_DATA_WIDTH(DAC_DATA_WIDTH)
-    ) udp_ctrl_inst (
-        .eth_clk_in        (gmii_rx_clk),
-        .dac_clk_in        (dac_clk),
-        .adc_clk_in        (adc_clk),
-        .rst_n             (ctrl_rst_n),
-
-        .s_axis_tdata      (m_axis_rx_tdata),
-        .s_axis_tvalid     (m_axis_rx_tvalid),
-        .s_axis_tready     (), // controller internally always ready in current version
-        .s_axis_tlast      (m_axis_rx_tlast),
-
-        .finish            (finish_dbg),
-
-        .dac_pulse_width   (dac_pulse_width_dbg),
-        .dac_pulse_period  (dac_pulse_period_dbg),
-        .dac_pulse_height  (dac_pulse_height_dbg),
-        .dac_pulse_num     (dac_pulse_num_dbg),
-
-        .adc_pulse_period  (adc_pulse_period_dbg),
-        .adc_pulse_num     (adc_pulse_num_dbg),
-
-        .dac_start         (dac_start_dbg),
-        .adc_start         (adc_start_dbg),
-
-        .dac_rst           (dac_rst_dbg),
-        .adc_rst           (adc_rst_dbg)
-    );
-
-    // -------------------------------------------------------------------------
-    // Simple LED status
-    // -------------------------------------------------------------------------
-    assign led[0] = clk_wiz_locked;
-    assign led[1] = m_axis_rx_tvalid;
-    assign led[2] = dac_start_dbg;
-    assign led[3] = adc_rst_dbg;
-
-endmodule

designs/eth_generator/README.md

@@ -1,11 +0,0 @@
-# Тестовый проект Generator + ETH + CTRL
-Проект состоит из AXIS Ethernet, контроллера и генератора. Позволяет генерировать сигналы, задав параметры через Ethernet.
-## Сборка
-```make all``` - собрать все до битстрима
-
-```make vivado``` - открыть проект в Vivado
-
-## Управление
-Используйте software/console.py. Пример:
-
-```python3 console.py --pulse_width 3_500_000 --pulse_period 20_000_000 --pulse_height 10000 --pulse_num 5500 --dac-bits 14```

designs/eth_generator/debug.xdc

@@ -1,117 +0,0 @@
-set_clock_groups -name ASYNC_UDP_CTRL -asynchronous -group [get_clocks rgmii_rxc] -group [get_clocks clk_out1_clk_wiz_ctrl_inst] -group [get_clocks clk_out2_clk_wiz_ctrl_inst]
-
-
-
-
-connect_debug_port u_ila_2/probe0 [get_nets [list {dac_pulse_height_dbg[0]} {dac_pulse_height_dbg[1]} {dac_pulse_height_dbg[2]} {dac_pulse_height_dbg[3]} {dac_pulse_height_dbg[4]} {dac_pulse_height_dbg[5]} {dac_pulse_height_dbg[6]} {dac_pulse_height_dbg[7]} {dac_pulse_height_dbg[8]} {dac_pulse_height_dbg[9]} {dac_pulse_height_dbg[10]} {dac_pulse_height_dbg[11]}]]
-connect_debug_port u_ila_2/probe1 [get_nets [list {dac_pulse_num_dbg[0]} {dac_pulse_num_dbg[1]} {dac_pulse_num_dbg[2]} {dac_pulse_num_dbg[3]} {dac_pulse_num_dbg[4]} {dac_pulse_num_dbg[5]} {dac_pulse_num_dbg[6]} {dac_pulse_num_dbg[7]} {dac_pulse_num_dbg[8]} {dac_pulse_num_dbg[9]} {dac_pulse_num_dbg[10]} {dac_pulse_num_dbg[11]} {dac_pulse_num_dbg[12]} {dac_pulse_num_dbg[13]} {dac_pulse_num_dbg[14]} {dac_pulse_num_dbg[15]}]]
-connect_debug_port u_ila_2/probe2 [get_nets [list {dac_pulse_period_dbg[0]} {dac_pulse_period_dbg[1]} {dac_pulse_period_dbg[2]} {dac_pulse_period_dbg[3]} {dac_pulse_period_dbg[4]} {dac_pulse_period_dbg[5]} {dac_pulse_period_dbg[6]} {dac_pulse_period_dbg[7]} {dac_pulse_period_dbg[8]} {dac_pulse_period_dbg[9]} {dac_pulse_period_dbg[10]} {dac_pulse_period_dbg[11]} {dac_pulse_period_dbg[12]} {dac_pulse_period_dbg[13]} {dac_pulse_period_dbg[14]} {dac_pulse_period_dbg[15]} {dac_pulse_period_dbg[16]} {dac_pulse_period_dbg[17]} {dac_pulse_period_dbg[18]} {dac_pulse_period_dbg[19]} {dac_pulse_period_dbg[20]} {dac_pulse_period_dbg[21]} {dac_pulse_period_dbg[22]} {dac_pulse_period_dbg[23]} {dac_pulse_period_dbg[24]} {dac_pulse_period_dbg[25]} {dac_pulse_period_dbg[26]} {dac_pulse_period_dbg[27]} {dac_pulse_period_dbg[28]} {dac_pulse_period_dbg[29]} {dac_pulse_period_dbg[30]} {dac_pulse_period_dbg[31]}]]
-connect_debug_port u_ila_2/probe3 [get_nets [list {dac_pulse_width_dbg[0]} {dac_pulse_width_dbg[1]} {dac_pulse_width_dbg[2]} {dac_pulse_width_dbg[3]} {dac_pulse_width_dbg[4]} {dac_pulse_width_dbg[5]} {dac_pulse_width_dbg[6]} {dac_pulse_width_dbg[7]} {dac_pulse_width_dbg[8]} {dac_pulse_width_dbg[9]} {dac_pulse_width_dbg[10]} {dac_pulse_width_dbg[11]} {dac_pulse_width_dbg[12]} {dac_pulse_width_dbg[13]} {dac_pulse_width_dbg[14]} {dac_pulse_width_dbg[15]} {dac_pulse_width_dbg[16]} {dac_pulse_width_dbg[17]} {dac_pulse_width_dbg[18]} {dac_pulse_width_dbg[19]} {dac_pulse_width_dbg[20]} {dac_pulse_width_dbg[21]} {dac_pulse_width_dbg[22]} {dac_pulse_width_dbg[23]} {dac_pulse_width_dbg[24]} {dac_pulse_width_dbg[25]} {dac_pulse_width_dbg[26]} {dac_pulse_width_dbg[27]} {dac_pulse_width_dbg[28]} {dac_pulse_width_dbg[29]} {dac_pulse_width_dbg[30]} {dac_pulse_width_dbg[31]}]]
-connect_debug_port u_ila_2/probe4 [get_nets [list dac_rst_dbg]]
-connect_debug_port u_ila_2/probe5 [get_nets [list dac_start_dbg]]
-
-
-connect_debug_port u_ila_1/probe7 [get_nets [list p2_wrt_OBUF]]
-
-create_debug_core u_ila_0 ila
-set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_0]
-set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_0]
-set_property C_ADV_TRIGGER false [get_debug_cores u_ila_0]
-set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_0]
-set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_0]
-set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_0]
-set_property C_TRIGIN_EN false [get_debug_cores u_ila_0]
-set_property C_TRIGOUT_EN false [get_debug_cores u_ila_0]
-set_property port_width 1 [get_debug_ports u_ila_0/clk]
-connect_debug_port u_ila_0/clk [get_nets [list rgmii_rxc_IBUF_BUFG]]
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe0]
-set_property port_width 3 [get_debug_ports u_ila_0/probe0]
-connect_debug_port u_ila_0/probe0 [get_nets [list {udp_ctrl_inst/eth_state[0]} {udp_ctrl_inst/eth_state[1]} {udp_ctrl_inst/eth_state[2]}]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe1]
-set_property port_width 96 [get_debug_ports u_ila_0/probe1]
-connect_debug_port u_ila_0/probe1 [get_nets [list {udp_ctrl_inst/cfg_bus_eth[0]} {udp_ctrl_inst/cfg_bus_eth[1]} {udp_ctrl_inst/cfg_bus_eth[2]} {udp_ctrl_inst/cfg_bus_eth[3]} {udp_ctrl_inst/cfg_bus_eth[4]} {udp_ctrl_inst/cfg_bus_eth[5]} {udp_ctrl_inst/cfg_bus_eth[6]} {udp_ctrl_inst/cfg_bus_eth[7]} {udp_ctrl_inst/cfg_bus_eth[8]} {udp_ctrl_inst/cfg_bus_eth[9]} {udp_ctrl_inst/cfg_bus_eth[10]} {udp_ctrl_inst/cfg_bus_eth[11]} {udp_ctrl_inst/cfg_bus_eth[12]} {udp_ctrl_inst/cfg_bus_eth[13]} {udp_ctrl_inst/cfg_bus_eth[14]} {udp_ctrl_inst/cfg_bus_eth[15]} {udp_ctrl_inst/cfg_bus_eth[16]} {udp_ctrl_inst/cfg_bus_eth[17]} {udp_ctrl_inst/cfg_bus_eth[18]} {udp_ctrl_inst/cfg_bus_eth[19]} {udp_ctrl_inst/cfg_bus_eth[20]} {udp_ctrl_inst/cfg_bus_eth[21]} {udp_ctrl_inst/cfg_bus_eth[22]} {udp_ctrl_inst/cfg_bus_eth[23]} {udp_ctrl_inst/cfg_bus_eth[24]} {udp_ctrl_inst/cfg_bus_eth[25]} {udp_ctrl_inst/cfg_bus_eth[26]} {udp_ctrl_inst/cfg_bus_eth[27]} {udp_ctrl_inst/cfg_bus_eth[28]} {udp_ctrl_inst/cfg_bus_eth[29]} {udp_ctrl_inst/cfg_bus_eth[30]} {udp_ctrl_inst/cfg_bus_eth[31]} {udp_ctrl_inst/cfg_bus_eth[32]} {udp_ctrl_inst/cfg_bus_eth[33]} {udp_ctrl_inst/cfg_bus_eth[34]} {udp_ctrl_inst/cfg_bus_eth[35]} {udp_ctrl_inst/cfg_bus_eth[36]} {udp_ctrl_inst/cfg_bus_eth[37]} {udp_ctrl_inst/cfg_bus_eth[38]} {udp_ctrl_inst/cfg_bus_eth[39]} {udp_ctrl_inst/cfg_bus_eth[40]} {udp_ctrl_inst/cfg_bus_eth[41]} {udp_ctrl_inst/cfg_bus_eth[42]} {udp_ctrl_inst/cfg_bus_eth[43]} {udp_ctrl_inst/cfg_bus_eth[44]} {udp_ctrl_inst/cfg_bus_eth[45]} {udp_ctrl_inst/cfg_bus_eth[46]} {udp_ctrl_inst/cfg_bus_eth[47]} {udp_ctrl_inst/cfg_bus_eth[48]} {udp_ctrl_inst/cfg_bus_eth[49]} {udp_ctrl_inst/cfg_bus_eth[50]} {udp_ctrl_inst/cfg_bus_eth[51]} {udp_ctrl_inst/cfg_bus_eth[52]} {udp_ctrl_inst/cfg_bus_eth[53]} {udp_ctrl_inst/cfg_bus_eth[54]} {udp_ctrl_inst/cfg_bus_eth[55]} {udp_ctrl_inst/cfg_bus_eth[56]} {udp_ctrl_inst/cfg_bus_eth[57]} {udp_ctrl_inst/cfg_bus_eth[58]} {udp_ctrl_inst/cfg_bus_eth[59]} {udp_ctrl_inst/cfg_bus_eth[60]} {udp_ctrl_inst/cfg_bus_eth[61]} {udp_ctrl_inst/cfg_bus_eth[62]} {udp_ctrl_inst/cfg_bus_eth[63]} {udp_ctrl_inst/cfg_bus_eth[64]} {udp_ctrl_inst/cfg_bus_eth[65]} {udp_ctrl_inst/cfg_bus_eth[66]} {udp_ctrl_inst/cfg_bus_eth[67]} {udp_ctrl_inst/cfg_bus_eth[68]} {udp_ctrl_inst/cfg_bus_eth[69]} {udp_ctrl_inst/cfg_bus_eth[70]} {udp_ctrl_inst/cfg_bus_eth[71]} {udp_ctrl_inst/cfg_bus_eth[72]} {udp_ctrl_inst/cfg_bus_eth[73]} {udp_ctrl_inst/cfg_bus_eth[74]} {udp_ctrl_inst/cfg_bus_eth[75]} {udp_ctrl_inst/cfg_bus_eth[76]} {udp_ctrl_inst/cfg_bus_eth[77]} {udp_ctrl_inst/cfg_bus_eth[78]} {udp_ctrl_inst/cfg_bus_eth[79]} {udp_ctrl_inst/cfg_bus_eth[80]} {udp_ctrl_inst/cfg_bus_eth[81]} {udp_ctrl_inst/cfg_bus_eth[82]} {udp_ctrl_inst/cfg_bus_eth[83]} {udp_ctrl_inst/cfg_bus_eth[84]} {udp_ctrl_inst/cfg_bus_eth[85]} {udp_ctrl_inst/cfg_bus_eth[86]} {udp_ctrl_inst/cfg_bus_eth[87]} {udp_ctrl_inst/cfg_bus_eth[88]} {udp_ctrl_inst/cfg_bus_eth[89]} {udp_ctrl_inst/cfg_bus_eth[90]} {udp_ctrl_inst/cfg_bus_eth[91]} {udp_ctrl_inst/cfg_bus_eth[92]} {udp_ctrl_inst/cfg_bus_eth[93]} {udp_ctrl_inst/cfg_bus_eth[94]} {udp_ctrl_inst/cfg_bus_eth[95]}]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe2]
-set_property port_width 8 [get_debug_ports u_ila_0/probe2]
-connect_debug_port u_ila_0/probe2 [get_nets [list {m_axis_rx_tdata[0]} {m_axis_rx_tdata[1]} {m_axis_rx_tdata[2]} {m_axis_rx_tdata[3]} {m_axis_rx_tdata[4]} {m_axis_rx_tdata[5]} {m_axis_rx_tdata[6]} {m_axis_rx_tdata[7]}]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe3]
-set_property port_width 1 [get_debug_ports u_ila_0/probe3]
-connect_debug_port u_ila_0/probe3 [get_nets [list udp_ctrl_inst/axis_hs]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe4]
-set_property port_width 1 [get_debug_ports u_ila_0/probe4]
-connect_debug_port u_ila_0/probe4 [get_nets [list udp_ctrl_inst/busy_flag_eth]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe5]
-set_property port_width 1 [get_debug_ports u_ila_0/probe5]
-connect_debug_port u_ila_0/probe5 [get_nets [list m_axis_rx_tlast]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe6]
-set_property port_width 1 [get_debug_ports u_ila_0/probe6]
-connect_debug_port u_ila_0/probe6 [get_nets [list m_axis_rx_tready]]
-create_debug_core u_ila_1 ila
-set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_1]
-set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_1]
-set_property C_ADV_TRIGGER false [get_debug_cores u_ila_1]
-set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_1]
-set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_1]
-set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_1]
-set_property C_TRIGIN_EN false [get_debug_cores u_ila_1]
-set_property C_TRIGOUT_EN false [get_debug_cores u_ila_1]
-set_property port_width 1 [get_debug_ports u_ila_1/clk]
-connect_debug_port u_ila_1/clk [get_nets [list clk_wiz_ctrl_inst/inst/clk_out1]]
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe0]
-set_property port_width 14 [get_debug_ports u_ila_1/probe0]
-connect_debug_port u_ila_1/probe0 [get_nets [list {p2_data_OBUF[0]} {p2_data_OBUF[1]} {p2_data_OBUF[2]} {p2_data_OBUF[3]} {p2_data_OBUF[4]} {p2_data_OBUF[5]} {p2_data_OBUF[6]} {p2_data_OBUF[7]} {p2_data_OBUF[8]} {p2_data_OBUF[9]} {p2_data_OBUF[10]} {p2_data_OBUF[11]} {p2_data_OBUF[12]} {p2_data_OBUF[13]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe1]
-set_property port_width 16 [get_debug_ports u_ila_1/probe1]
-connect_debug_port u_ila_1/probe1 [get_nets [list {dac_pulse_num[0]} {dac_pulse_num[1]} {dac_pulse_num[2]} {dac_pulse_num[3]} {dac_pulse_num[4]} {dac_pulse_num[5]} {dac_pulse_num[6]} {dac_pulse_num[7]} {dac_pulse_num[8]} {dac_pulse_num[9]} {dac_pulse_num[10]} {dac_pulse_num[11]} {dac_pulse_num[12]} {dac_pulse_num[13]} {dac_pulse_num[14]} {dac_pulse_num[15]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe2]
-set_property port_width 14 [get_debug_ports u_ila_1/probe2]
-connect_debug_port u_ila_1/probe2 [get_nets [list {dac_pulse_height[0]} {dac_pulse_height[1]} {dac_pulse_height[2]} {dac_pulse_height[3]} {dac_pulse_height[4]} {dac_pulse_height[5]} {dac_pulse_height[6]} {dac_pulse_height[7]} {dac_pulse_height[8]} {dac_pulse_height[9]} {dac_pulse_height[10]} {dac_pulse_height[11]} {dac_pulse_height[12]} {dac_pulse_height[13]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe3]
-set_property port_width 32 [get_debug_ports u_ila_1/probe3]
-connect_debug_port u_ila_1/probe3 [get_nets [list {dac_pulse_period[0]} {dac_pulse_period[1]} {dac_pulse_period[2]} {dac_pulse_period[3]} {dac_pulse_period[4]} {dac_pulse_period[5]} {dac_pulse_period[6]} {dac_pulse_period[7]} {dac_pulse_period[8]} {dac_pulse_period[9]} {dac_pulse_period[10]} {dac_pulse_period[11]} {dac_pulse_period[12]} {dac_pulse_period[13]} {dac_pulse_period[14]} {dac_pulse_period[15]} {dac_pulse_period[16]} {dac_pulse_period[17]} {dac_pulse_period[18]} {dac_pulse_period[19]} {dac_pulse_period[20]} {dac_pulse_period[21]} {dac_pulse_period[22]} {dac_pulse_period[23]} {dac_pulse_period[24]} {dac_pulse_period[25]} {dac_pulse_period[26]} {dac_pulse_period[27]} {dac_pulse_period[28]} {dac_pulse_period[29]} {dac_pulse_period[30]} {dac_pulse_period[31]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe4]
-set_property port_width 32 [get_debug_ports u_ila_1/probe4]
-connect_debug_port u_ila_1/probe4 [get_nets [list {dac_pulse_width[0]} {dac_pulse_width[1]} {dac_pulse_width[2]} {dac_pulse_width[3]} {dac_pulse_width[4]} {dac_pulse_width[5]} {dac_pulse_width[6]} {dac_pulse_width[7]} {dac_pulse_width[8]} {dac_pulse_width[9]} {dac_pulse_width[10]} {dac_pulse_width[11]} {dac_pulse_width[12]} {dac_pulse_width[13]} {dac_pulse_width[14]} {dac_pulse_width[15]} {dac_pulse_width[16]} {dac_pulse_width[17]} {dac_pulse_width[18]} {dac_pulse_width[19]} {dac_pulse_width[20]} {dac_pulse_width[21]} {dac_pulse_width[22]} {dac_pulse_width[23]} {dac_pulse_width[24]} {dac_pulse_width[25]} {dac_pulse_width[26]} {dac_pulse_width[27]} {dac_pulse_width[28]} {dac_pulse_width[29]} {dac_pulse_width[30]} {dac_pulse_width[31]}]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe5]
-set_property port_width 1 [get_debug_ports u_ila_1/probe5]
-connect_debug_port u_ila_1/probe5 [get_nets [list dac_rst]]
-create_debug_port u_ila_1 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe6]
-set_property port_width 1 [get_debug_ports u_ila_1/probe6]
-connect_debug_port u_ila_1/probe6 [get_nets [list dac_start]]
-create_debug_core u_ila_2 ila
-set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_2]
-set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_2]
-set_property C_ADV_TRIGGER false [get_debug_cores u_ila_2]
-set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_2]
-set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_2]
-set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_2]
-set_property C_TRIGIN_EN false [get_debug_cores u_ila_2]
-set_property C_TRIGOUT_EN false [get_debug_cores u_ila_2]
-set_property port_width 1 [get_debug_ports u_ila_2/clk]
-connect_debug_port u_ila_2/clk [get_nets [list clk_wiz_ctrl_inst/inst/clk_out2]]
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe0]
-set_property port_width 8 [get_debug_ports u_ila_2/probe0]
-connect_debug_port u_ila_2/probe0 [get_nets [list {finish_cnt[0]} {finish_cnt[1]} {finish_cnt[2]} {finish_cnt[3]} {finish_cnt[4]} {finish_cnt[5]} {finish_cnt[6]} {finish_cnt[7]}]]
-create_debug_port u_ila_2 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe1]
-set_property port_width 1 [get_debug_ports u_ila_2/probe1]
-connect_debug_port u_ila_2/probe1 [get_nets [list finish_dbg]]
-create_debug_port u_ila_2 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe2]
-set_property port_width 1 [get_debug_ports u_ila_2/probe2]
-connect_debug_port u_ila_2/probe2 [get_nets [list finish_pending]]
-set_property C_CLK_INPUT_FREQ_HZ 300000000 [get_debug_cores dbg_hub]
-set_property C_ENABLE_CLK_DIVIDER false [get_debug_cores dbg_hub]
-set_property C_USER_SCAN_CHAIN 1 [get_debug_cores dbg_hub]
-connect_debug_port dbg_hub/clk [get_nets adc_clk]

designs/eth_generator/eth_generator.sv

@@ -1,345 +0,0 @@
-`timescale 1 ns / 1 ns
-
-module eth_generator_top #(
-    parameter int unsigned DAC_DATA_WIDTH = 14
-)(
-    input               sys_clk_p,
-    input               sys_clk_n,
-    input               rst_n,
-
-    output [3:0]        led,
-
-    output              e_reset,
-    output              e_mdc,
-    inout               e_mdio,
-
-    output [3:0]        rgmii_txd,
-    output              rgmii_txctl,
-    output              rgmii_txc,
-    input  [3:0]        rgmii_rxd,
-    input               rgmii_rxctl,
-    input               rgmii_rxc,
-
-    // DAC
-    output              p2_clk,
-    output              p2_wrt,
-    (* MARK_DEBUG="true" *) output [13:0]       p2_data
-);
-
-    // -------------------------------------------------------------------------
-    // Internal GMII-side signals
-    // -------------------------------------------------------------------------
-    wire  [7:0] gmii_txd;
-    wire        gmii_tx_en;
-    wire        gmii_tx_er;
-    wire        gmii_tx_clk;
-    wire        gmii_crs;
-    wire        gmii_col;
-    wire  [7:0] gmii_rxd_i;
-    wire        gmii_rx_dv;
-    wire        gmii_rx_er;
-    wire        gmii_rx_clk;
-
-    wire [31:0] pack_total_len;
-
-    wire        e_rx_dv;
-    wire [7:0]  e_rxd;
-    wire        e_tx_en;
-    wire [7:0]  e_txd;
-    wire        e_rst_n;
-    wire        sys_clk;
-
-    wire        duplex_mode;
-    
-
-    assign duplex_mode = 1'b1;
-
-    // -------------------------------------------------------------------------
-    // System clock buffer (200 MHz differential input)
-    // -------------------------------------------------------------------------
-    IBUFDS sys_clk_ibufgds (
-        .O  (sys_clk),
-        .I  (sys_clk_p),
-        .IB (sys_clk_n)
-    );
-
-    // -------------------------------------------------------------------------
-    // IDELAYCTRL
-    // -------------------------------------------------------------------------
-    (* IODELAY_GROUP = "rgmii_idelay_group" *)
-    IDELAYCTRL IDELAYCTRL_inst (
-        .RDY    (),
-        .REFCLK (sys_clk),
-        .RST    (1'b0)
-    );
-
-    // -------------------------------------------------------------------------
-    // Generated clocks for controller
-    // Need to create this IP in Vivado:
-    //  input : 200 MHz
-    //  output0: 130 MHz
-    //  output1: 65 MHz
-    // -------------------------------------------------------------------------
-    wire dac_clk;
-    wire adc_clk;
-    wire clk_wiz_locked;
-
-    clk_wiz_ctrl_inst clk_wiz_ctrl_inst (
-        .clk_in1   (sys_clk),
-        .reset    (~rst_n),
-        .clk_out1  (dac_clk),   // 130 MHz
-        .clk_out2  (adc_clk),   // 65 MHz
-        .locked    (clk_wiz_locked)
-    );
-
-    // -------------------------------------------------------------------------
-    // GMII <-> RGMII conversion
-    // -------------------------------------------------------------------------
-    util_gmii_to_rgmii util_gmii_to_rgmii_m0 (
-        .reset           (1'b0),
-        .rgmii_td        (rgmii_txd),
-        .rgmii_tx_ctl    (rgmii_txctl),
-        .rgmii_txc       (rgmii_txc),
-        .rgmii_rd        (rgmii_rxd),
-        .rgmii_rx_ctl    (rgmii_rxctl),
-        .gmii_rx_clk     (gmii_rx_clk),
-        .gmii_txd        (e_txd),
-        .gmii_tx_en      (e_tx_en),
-        .gmii_tx_er      (1'b0),
-        .gmii_tx_clk     (gmii_tx_clk),
-        .gmii_crs        (gmii_crs),
-        .gmii_col        (gmii_col),
-        .gmii_rxd        (gmii_rxd_i),
-        .rgmii_rxc       (rgmii_rxc),
-        .gmii_rx_dv      (gmii_rx_dv),
-        .gmii_rx_er      (gmii_rx_er),
-        .speed_selection (2'b10),
-        .duplex_mode     (duplex_mode)
-    );
-
-    // -------------------------------------------------------------------------
-    // GMII arbitration / adaptation
-    // -------------------------------------------------------------------------
-    gmii_arbi arbi_inst (
-        .clk            (gmii_tx_clk),
-        .rst_n          (rst_n),
-        .speed          (2'b10),
-        .link           (1'b1),
-        .pack_total_len (pack_total_len),
-        .e_rst_n        (e_rst_n),
-        .gmii_rx_dv     (gmii_rx_dv),
-        .gmii_rxd       (gmii_rxd_i),
-        .gmii_tx_en     (gmii_tx_en),
-        .gmii_txd       (gmii_txd),
-        .e_rx_dv        (e_rx_dv),
-        .e_rxd          (e_rxd),
-        .e_tx_en        (e_tx_en),
-        .e_txd          (e_txd)
-    );
-
-    // -------------------------------------------------------------------------
-    // axis_mac interface
-    // RX stream from Ethernet goes into controller
-    // TX stream is unused for now
-    // -------------------------------------------------------------------------
-    wire        req_ready;
-
-    reg         send_req;
-    reg  [15:0] data_length;
-
-    reg  [7:0]  s_axis_tx_tdata;
-    reg         s_axis_tx_tvalid;
-    wire        s_axis_tx_tready;
-    reg         s_axis_tx_tlast;
-
-    (* MARK_DEBUG="true" *) wire [7:0]  m_axis_rx_tdata;
-    (* MARK_DEBUG="true" *) wire        m_axis_rx_tvalid;
-    (* MARK_DEBUG="true" *) wire        m_axis_rx_tlast;
-    (* MARK_DEBUG="true" *) wire        m_axis_rx_tready;
-
-    // Always ready to accept RX payload bytes
-    assign m_axis_rx_tready = 1'b1;
-
-    // TX disabled
-    always @(*) begin
-        send_req        = 1'b0;
-        data_length     = 16'd0;
-        s_axis_tx_tdata = 8'd0;
-        s_axis_tx_tvalid= 1'b0;
-        s_axis_tx_tlast = 1'b0;
-    end
-
-    axis_mac axis_mac0 (
-        .gmii_tx_clk       (gmii_tx_clk),
-        .gmii_rx_clk       (gmii_rx_clk),
-        .rst_n             (e_rst_n),
-
-        .gmii_rx_dv        (e_rx_dv),
-        .gmii_rxd          (e_rxd),
-        .gmii_tx_en        (gmii_tx_en),
-        .gmii_txd          (gmii_txd),
-
-        .send_req          (send_req),
-        .data_length       (data_length),
-        .req_ready         (req_ready),
-
-        .s_axis_tx_tdata   (s_axis_tx_tdata),
-        .s_axis_tx_tvalid  (s_axis_tx_tvalid),
-        .s_axis_tx_tready  (s_axis_tx_tready),
-        .s_axis_tx_tlast   (s_axis_tx_tlast),
-
-        .m_axis_rx_tdata   (m_axis_rx_tdata),
-        .m_axis_rx_tvalid  (m_axis_rx_tvalid),
-        .m_axis_rx_tready  (m_axis_rx_tready),
-        .m_axis_rx_tlast   (m_axis_rx_tlast)
-    );
-
-    // PHY reset helper from your original example
-    reset reset_m0 (
-        .clk   (sys_clk),
-        .key1  (rst_n),
-        .rst_n (e_reset)
-    );
-
-    // MDIO lines are not driven here yet
-    assign e_mdc  = 1'b0;
-    assign e_mdio = 1'bz;
-
-    // -------------------------------------------------------------------------
-    // Controller reset
-    // Use both external reset and clk_wiz lock
-    // -------------------------------------------------------------------------
-    wire ctrl_rst_n = rst_n & clk_wiz_locked;
-
-    // -------------------------------------------------------------------------
-    // Debug finish generator (still used here, since generator doesn't have finish signal)
-    //
-    // After each adc_start pulse generates one finish pulse after some delay.
-    // This is just for first bring-up so the controller can leave busy state
-    // If you don't want this, replace with:
-    // wire finish_dbg = 1'b0;
-    // -------------------------------------------------------------------------
-    (* MARK_DEBUG="true" *) logic        finish_dbg;
-    (* MARK_DEBUG="true" *) logic [7:0]  finish_cnt;
-    (* MARK_DEBUG="true" *) logic        finish_pending;
-
-    // Controller outputs to debug
-    (* MARK_DEBUG="true" *) wire [31:0]               dac_pulse_width;
-    (* MARK_DEBUG="true" *) wire [31:0]               dac_pulse_period;
-    (* MARK_DEBUG="true" *) wire [DAC_DATA_WIDTH-1:0] dac_pulse_height;
-    (* MARK_DEBUG="true" *) wire [15:0]               dac_pulse_num;
-
-    (* MARK_DEBUG="true" *) wire [31:0]               adc_pulse_period_dbg;
-    (* MARK_DEBUG="true" *) wire [15:0]               adc_pulse_num_dbg;
-
-    (* MARK_DEBUG="true" *) wire                      dac_start;
-    (* MARK_DEBUG="true" *) wire                      adc_start_dbg;
-    (* MARK_DEBUG="true" *) wire                      dac_rst;
-    (* MARK_DEBUG="true" *) wire                      adc_rst_dbg;
-
-    always_ff @(posedge adc_clk or negedge ctrl_rst_n) begin
-        if (!ctrl_rst_n) begin
-            finish_dbg     <= 1'b0;
-            finish_cnt     <= 8'd0;
-            finish_pending <= 1'b0;
-        end else begin
-            finish_dbg <= 1'b0;
-
-            if (adc_start_dbg) begin
-                finish_pending <= 1'b1;
-                finish_cnt     <= 8'd80;
-            end else if (finish_pending) begin
-                if (finish_cnt == 8'd0) begin
-                    finish_dbg     <= 1'b1;
-                    finish_pending <= 1'b0;
-                end else begin
-                    finish_cnt <= finish_cnt - 8'd1;
-                end
-            end
-        end
-    end
-
-    // -------------------------------------------------------------------------
-    // Controller
-    // ETH domain = gmii_rx_clk, because RX AXI master comes from axis_mac RX side
-    // -------------------------------------------------------------------------
-    control #(
-        .DAC_DATA_WIDTH(DAC_DATA_WIDTH)
-    ) udp_ctrl_inst (
-        .eth_clk_in        (gmii_rx_clk),
-        .dac_clk_in        (dac_clk),
-        .adc_clk_in        (adc_clk),
-        .rst_n             (ctrl_rst_n),
-
-        .s_axis_tdata      (m_axis_rx_tdata),
-        .s_axis_tvalid     (m_axis_rx_tvalid),
-        .s_axis_tready     (), // controller internally always ready in current version
-        .s_axis_tlast      (m_axis_rx_tlast),
-
-        .finish            (finish_dbg),
-
-        .dac_pulse_width   (dac_pulse_width),
-        .dac_pulse_period  (dac_pulse_period),
-        .dac_pulse_height  (dac_pulse_height),
-        .dac_pulse_num     (dac_pulse_num),
-
-        .adc_pulse_period  (adc_pulse_period_dbg),
-        .adc_pulse_num     (adc_pulse_num_dbg),
-
-        .dac_start         (dac_start),
-        .adc_start         (adc_start_dbg),
-
-        .dac_rst           (dac_rst),
-        .adc_rst           (adc_rst_dbg)
-    );
-
-    // -------------------------------------------------------------------------
-    // DAC
-    // -------------------------------------------------------------------------
-    generator #(
-        .DATA_WIDTH(DAC_DATA_WIDTH)
-    ) generator_inst (
-        .clk_in(dac_clk),
-        .rst(dac_rst),
-        .start(dac_start),
-        .pulse_width(dac_pulse_width),
-        .pulse_period(dac_pulse_period),
-        .pulse_height(dac_pulse_height),
-        .pulse_num(dac_pulse_num),
-        .pulse(p2_wrt ),
-        .pulse_height_out(p2_data)
-    );
-
-    // dac clk mgt
-    wire p2_clk_oddr;
-
-    ODDR #(
-        .DDR_CLK_EDGE("SAME_EDGE"),
-        .INIT(1'b0),
-        .SRTYPE("SYNC")
-    ) ODDR_p2_clk (
-        .Q (p2_clk_oddr),
-        .C (dac_clk),
-        .CE(1'b1),
-        .D1(1'b1),
-        .D2(1'b0),
-        .R (1'b0),
-        .S (1'b0)
-    );
-
-    OBUF OBUF_p2_clk (
-        .I(p2_clk_oddr),
-        .O(p2_clk)
-    );
-    
-    //assign p2_wrt = p2_clk;
-
-    // -------------------------------------------------------------------------
-    // Simple LED status
-    // -------------------------------------------------------------------------
-    assign led[0] = clk_wiz_locked;
-    assign led[1] = m_axis_rx_tvalid;
-    assign led[2] = dac_start;
-    assign led[3] = adc_rst_dbg;
-
-endmodule

designs/reflectometer_base/Makefile

@@ -7,8 +7,8 @@
 #
 
 # FPGA settings
-FPGA_PART = xc7a35tfgg484-1
-FPGA_TOP = eth_generator_top
+FPGA_PART = xc7a100tfgg484-2
+FPGA_TOP = reflectometer_top
 FPGA_ARCH = artix7
 
 RTL_DIR = ../../rtl
@@ -16,13 +16,13 @@ RTL_DIR = ../../rtl
 
 include ../../scripts/vivado.mk
 
-SYN_FILES += eth_generator.sv
+SYN_FILES += reflectometer.sv
 SYN_FILES += $(sort $(shell find ../../rtl -type f \( -name '*.v' -o -name '*.sv' \)))
 
 XCI_FILES = $(sort $(shell find ../../rtl/ethernet-udp/src -type f -name '*.xci'))
 XCI_FILES += $(sort $(shell find ip/ -type f -name '*.xci'))
 
-XDC_FILES += ../../constraints/ax7a035b.xdc
+XDC_FILES += ../../constraints/ax7102.xdc
 XDC_FILES += debug.xdc
 
 

designs/reflectometer_base/README.md

@@ -0,0 +1,145 @@
+# Рефлектометр
+
+Модуль представляет собой законченную встраиваемую систему рефлектометра, объединяющую:
+
+- контроллер управления
+- генератор импульсов (DAC path)
+- сэмплер данных (ADC path)
+- аккумулятор и обработчик данных
+
+Система предназначена для формирования импульсов, синхронного сбора отраженного сигнала, накопления результатов и передачи обработанных данных во внешнюю систему.
+
+Данный модуль является полноценным интегрируемым блоком, который может использоваться как самостоятельная аппаратная подсистема внутри более крупного проекта.
+
+---
+
+## Назначение системы
+
+Основная задача системы:
+
+1. Получить параметры измерения через AXI Stream
+2. Сформировать последовательность импульсов на DAC
+3. Выполнить синходную выборку данных с ADC
+4. Накопить и обработать результаты
+5. Передать итоговые данные обратно через AXI Stream
+
+Таким образом реализуется полный цикл измерения без необходимости внешнего управления отдельными блоками.
+
+---
+
+## Состав системы
+
+### Controller
+
+Принимает входные команды по AXI Stream (Ethernet RX), декодирует параметры измерения и управляет всеми внутренними модулями системы.
+
+Формирует:
+
+- запуск генератора (`dac_start`)
+- запуск аккумулятора (`adc_start`)
+- параметры импульсов DAC
+- параметры выборки ADC
+- локальные reset-сигналы
+
+---
+
+### Generator
+
+Формирует последовательность импульсов на DAC с заданными:
+
+- амплитудой
+- длительностью
+- периодом
+- количеством повторений
+
+Для каждого импульса инициирует запуск выборки в сэмплере.
+
+---
+
+### Sampler
+
+Выполняет синхронный сбор данных с ADC по запросу генератора.
+
+Поддерживает:
+
+- фильтрацию `out_of_range`
+- упаковку данных
+- преобразование типа кода ( прямой или дополнительный)
+
+---
+
+### Accumulator
+
+Получает поток данных от сэмплера, выполняет накопление, усреднение и оконную обработку, после чего формирует пакеты для передачи результата.
+
+---
+
+## Управление системой
+
+Пользователь взаимодействует только с контроллером через AXI Stream-интерфейс.
+
+Прямое управление генератором, сэмплером и аккумулятором не требуется.
+
+---
+
+## Clock Domain Crossing (CDC)
+
+Система работает в нескольких тактовых доменах:
+
+- Ethernet RX (`gmii_rx_clk`)
+- Ethernet TX (`gmii_tx_clk`)
+- DAC (`dac_clk`)
+- ADC (`adc_clk`)
+
+Для корректной синхронизации между DAC и ADC используются специальные CDC-регистры для сигналов:
+
+- `sample_req`
+- `sample_done`
+
+Это обеспечивает безопасную передачу handshake-сигналов между тактовыми доменами.
+
+---
+
+## Список параметров
+
+### DAC_DATA_WIDTH
+Ширина выходных данных отправляемых на ЦАП.
+
+### ZERO_LEVEL
+Уровень сигнала в состоянии отсутствия импульса (базовый уровень сигнала).
+
+Типовые значения:
+
+- `8192` — середина диапазона ЦАП
+- `0` — нулевой уровень
+
+### ADC_DATA_WIDTH
+Ширина входных данных, получаемых с АЦП.
+
+### PACK_FACTOR
+Количество отсчетов, собираемых в один выходной пакет.
+
+### PROCESS_MODE
+Режим интерпретации входного кода:
+
+- `0` — прямой код
+- `1` — дополнительный код
+
+### ACCUM_WIDTH 
+Размер данных для аккумуляции, должен быть степенью числа 2. По умолчанию - 32
+
+### N_MAX 
+Максимальное число окон в последовательности. Должно быть степенью числа 2. Влияет на размер используемой памяти.
+
+### WINDOW_SIZE 
+Размер окна усреднения
+
+### PACKET_SIZE 
+Размер выходного пакета
+
+---
+
+## Сборка
+```make all``` - собрать все до битстрима
+
+```make vivado``` - открыть проект в Vivado

designs/reflectometer_base/debug.xdc

@@ -0,0 +1 @@
+set_clock_groups -name ASYNC_UDP_CTRL -asynchronous -group [get_clocks rgmii_rxc] -group [get_clocks clk_out1_clk_wiz_ctrl_inst] -group [get_clocks clk_out2_clk_wiz_ctrl_inst]

designs/reflectometer_base/reflectometer.sv

@@ -0,0 +1,320 @@
+`timescale 1 ns / 1 ns
+
+module reflectometer_top #(
+    parameter int unsigned DAC_DATA_WIDTH = 14,
+    parameter int unsigned ADC_DATA_WIDTH = 12,
+    parameter PACK_FACTOR = 1,
+    parameter PROCESS_MODE = 0,
+    parameter ZERO_LEVEL = 8192,
+    parameter ACCUM_WIDTH = 32,
+    parameter N_MAX = 4096,
+    parameter WINDOW_SIZE = 65,
+    parameter PACKET_SIZE = 1024
+)(
+    input               sys_clk,
+    input               rst_n,
+
+    output [3:0]        led,
+
+    input gmii_rx_clk,
+    input gmii_tx_clk,
+
+    (* MARK_DEBUG="true" *) output logic [7:0]  s_axis_tx_tdata,
+    (* MARK_DEBUG="true" *) output logic        s_axis_tx_tvalid,
+    (* MARK_DEBUG="true" *) input  logic        s_axis_tx_tready,
+    (* MARK_DEBUG="true" *) output logic        s_axis_tx_tlast,
+
+    (* MARK_DEBUG="true" *) input  wire [7:0]  m_axis_rx_tdata,
+    (* MARK_DEBUG="true" *) input  wire        m_axis_rx_tvalid,
+    (* MARK_DEBUG="true" *) input  wire        m_axis_rx_tlast,
+    (* MARK_DEBUG="true" *) output wire        m_axis_rx_tready,
+
+    // axis_mac
+
+    (* MARK_DEBUG="true" *) input logic       req_ready,
+    (* MARK_DEBUG="true" *) output logic       send_req,
+
+    // DAC
+
+    output wire p2_clk,
+    (* MARK_DEBUG="true" *) output     wire [DAC_DATA_WIDTH-1:0]       p2_data,
+    (* MARK_DEBUG="true" *) output     wire p2_wrt,
+
+    // ADC
+    output ch2_clk,
+    (* MARK_DEBUG="true" *) input [ADC_DATA_WIDTH-1:0] ch2_data,
+    input ch2_otr
+
+);
+
+    // -------------------------------------------------------------------------
+    // IDELAYCTRL
+    // -------------------------------------------------------------------------
+    (* IODELAY_GROUP = "rgmii_idelay_group" *)
+    IDELAYCTRL IDELAYCTRL_inst (
+        .RDY    (),
+        .REFCLK (sys_clk),
+        .RST    (1'b0)
+    );
+
+    // -------------------------------------------------------------------------
+    // Generated clocks for controller
+    // Need to create this IP in Vivado:
+    //  input : 200 MHz
+    //  output0: 130 MHz
+    //  output1: 65 MHz
+    // -------------------------------------------------------------------------
+    wire dac_clk;
+    wire adc_clk;
+    wire clk_wiz_locked;
+
+    clk_wiz_ctrl_inst clk_wiz_ctrl_inst (
+        .clk_in1   (sys_clk),
+        .reset    (~rst_n),
+        .clk_out1  (dac_clk),   // 130 MHz
+        .clk_out2  (adc_clk),   // 65 MHz
+        .locked    (clk_wiz_locked)
+    );
+
+    // -------------------------------------------------------------------------
+    // axis_mac interface
+    // RX stream from Ethernet goes into controller
+    // TX stream is unused for now
+    // -------------------------------------------------------------------------
+
+
+    // -------------------------------------------------------------------------
+    // Controller reset
+    // Use both external reset and clk_wiz lock
+    // -------------------------------------------------------------------------
+    wire ctrl_rst_n = rst_n & clk_wiz_locked;
+
+
+    (* MARK_DEBUG="true" *) logic        finish;
+
+    // Controller outputs to debug
+    (* MARK_DEBUG="true" *) wire [31:0]               dac_pulse_width;
+    (* MARK_DEBUG="true" *) wire [31:0]               dac_pulse_period;
+    (* MARK_DEBUG="true" *) wire [DAC_DATA_WIDTH-1:0] dac_pulse_height;
+    (* MARK_DEBUG="true" *) wire [15:0]               dac_pulse_num;
+
+    (* MARK_DEBUG="true" *) wire [31:0]               adc_pulse_period;
+    (* MARK_DEBUG="true" *) wire [15:0]               adc_pulse_num;
+
+    (* MARK_DEBUG="true" *) wire                      dac_start;
+    (* MARK_DEBUG="true" *) wire                      adc_start;
+    (* MARK_DEBUG="true" *) wire                      dac_rst;
+    (* MARK_DEBUG="true" *) wire                      adc_rst;
+
+
+    // -------------------------------------------------------------------------
+    // Controller
+    // ETH domain = gmii_rx_clk, because RX AXI master comes from axis_mac RX side
+    // -------------------------------------------------------------------------
+    control #(
+        .DAC_DATA_WIDTH(DAC_DATA_WIDTH)
+    ) udp_ctrl_inst (
+        .eth_clk_in        (gmii_rx_clk),
+        .dac_clk_in        (dac_clk),
+        .adc_clk_in        (adc_clk),
+        .rst_n             (ctrl_rst_n),
+
+        .s_axis_tdata      (m_axis_rx_tdata),
+        .s_axis_tvalid     (m_axis_rx_tvalid),
+        .s_axis_tready     (m_axis_rx_tready),
+        .s_axis_tlast      (m_axis_rx_tlast),
+
+        .finish            (finish),
+
+        .dac_pulse_width   (dac_pulse_width),
+        .dac_pulse_period  (dac_pulse_period),
+        .dac_pulse_height  (dac_pulse_height),
+        .dac_pulse_num     (dac_pulse_num),
+
+        .adc_pulse_period  (adc_pulse_period),
+        .adc_pulse_num     (adc_pulse_num),
+
+        .dac_start         (dac_start),
+        .adc_start         (adc_start),
+
+        .dac_rst           (dac_rst),
+        .adc_rst           (adc_rst)
+    );
+
+    // -------------------------------------------------------------------------
+    // DAC
+    // -------------------------------------------------------------------------
+
+   (* MARK_DEBUG="true" *) logic sample_req;
+   (* MARK_DEBUG="true" *) logic sample_req_sync1;
+   (* MARK_DEBUG="true" *) logic sample_req_sync2;
+   (* MARK_DEBUG="true" *) logic sample_req_sync3;
+
+   (* MARK_DEBUG="true" *) logic sample_done;
+   (* MARK_DEBUG="true" *) logic sample_done_sync1;
+   (* MARK_DEBUG="true" *) logic sample_done_sync2;
+   (* MARK_DEBUG="true" *) logic sample_done_sync3;
+
+   //------------------------------------------------------------
+    // DAC -> ADC CDC
+    //------------------------------------------------------------
+    always_ff @(posedge adc_clk or posedge adc_rst) begin
+        if (adc_rst) begin
+            sample_req <= 1'b0;
+            sample_req_sync2  <= 1'b0;
+            sample_req_sync3 <= 1'b0;
+        end
+        else begin
+            sample_req_sync2 <= sample_req_sync1;
+            sample_req_sync3  <= sample_req_sync2;
+            sample_req <= sample_req_sync3;
+        end
+    end
+
+     //------------------------------------------------------------
+    // ADC -> DAC CDC
+    //------------------------------------------------------------
+    always_ff @(posedge dac_clk or posedge dac_rst) begin
+        if (dac_rst) begin
+            sample_done <= 1'b0;
+            sample_done_sync2 <= 1'b0;
+            sample_done_sync3 <= 1'b0;
+        end
+        else begin
+            sample_done_sync2 <= sample_done_sync1;
+            sample_done_sync3 <= sample_done_sync2;
+            sample_done <= sample_done_sync3;
+        end
+    end
+
+     //------------------------------------------------------------
+    // Generator
+    //------------------------------------------------------------
+
+    generator #(
+        .DATA_WIDTH(DAC_DATA_WIDTH),
+        .ZERO_LEVEL(ZERO_LEVEL)
+    ) generator_inst (
+        .clk_in(dac_clk),
+        .rst(dac_rst),
+        .start(dac_start),
+        .pulse_width(dac_pulse_width),
+        .pulse_period(dac_pulse_period),
+        .pulse_height(dac_pulse_height),
+        .pulse_num(dac_pulse_num),
+        .pulse(p2_wrt),
+        .pulse_height_out(p2_data),
+        .sample_done(sample_done),
+        .sample_req(sample_req_sync1)
+    );
+
+    wire ch2_clk_oddr;
+
+    ODDR #(
+        .DDR_CLK_EDGE("SAME_EDGE"),
+        .INIT(1'b0),
+        .SRTYPE("SYNC")
+    ) ODDR_ch2_clk (
+        .Q (ch2_clk_oddr),
+        .C (adc_clk),
+        .CE(1'b1),
+        .D1(1'b1),
+        .D2(1'b0),
+        .R (1'b0),
+        .S (1'b0)
+    );
+
+    OBUF OBUF_ch2_clk (
+        .I(ch2_clk_oddr),
+        .O(ch2_clk)
+    );
+
+    wire p2_clk_oddr;
+
+    ODDR #(
+        .DDR_CLK_EDGE("SAME_EDGE"),
+        .INIT(1'b0),
+        .SRTYPE("SYNC")
+    ) ODDR_p2_clk (
+        .Q (p2_clk_oddr),
+        .C (dac_clk),
+        .CE(1'b1),
+        .D1(1'b1),
+        .D2(1'b0),
+        .R (1'b0),
+        .S (1'b0)
+    );
+
+    OBUF OBUF_p2_clk (
+        .I(p2_clk_oddr),
+        .O(p2_clk)
+    );
+
+// -------------------------------------------------------------------------
+    // ADC
+    // -------------------------------------------------------------------------
+
+    (* MARK_DEBUG="true" *) logic [ADC_DATA_WIDTH*PACK_FACTOR-1:0]  accum_m_axis_tdata;
+    (* MARK_DEBUG="true" *) logic acum_m_axis_tvalid;
+
+    sampler 
+    #(
+        .DATA_WIDTH(ADC_DATA_WIDTH),
+        .PACK_FACTOR(PACK_FACTOR),
+        .PROCESS_MODE(PROCESS_MODE)
+    )
+    sampler_dut
+    (
+       .clk_in(adc_clk),
+       .rst(adc_rst),
+       .data_in(ch2_data),
+       .out_of_range(ch2_otr),
+       .m_axis_tdata(accum_m_axis_tdata),
+       .m_axis_tvalid(acum_m_axis_tvalid),
+        .smp_num(adc_pulse_period),
+        .sample_req(sample_req),
+        .sample_done(sample_done_sync1)
+    );
+
+    // -------------------------------------------------------------------------
+    // Accumulator
+    // -------------------------------------------------------------------------
+
+    accumulator_top
+    #(
+        .DATA_WIDTH(ADC_DATA_WIDTH),
+        .ACCUM_WIDTH(ACCUM_WIDTH),
+        .N_MAX(N_MAX),
+        .WINDOW_SIZE(WINDOW_SIZE),
+        .PACKET_SIZE(PACKET_SIZE)
+    )
+    accumulator_top_dut
+    (
+        .clk_in(adc_clk),
+        .rst(adc_rst),
+        .s_axis_tdata(accum_m_axis_tdata),
+        .s_axis_tvalid(acum_m_axis_tvalid),
+        .start(adc_start),
+        .smp_num(adc_pulse_period),
+        .seq_num(adc_pulse_num),
+
+        .eth_clk_in(gmii_tx_clk),
+        .req_ready(req_ready),
+        .send_req(send_req),
+        .m_axis_tdata(s_axis_tx_tdata),
+        .m_axis_tvalid(s_axis_tx_tvalid),
+        .m_axis_tready(s_axis_tx_tready),
+        .m_axis_tlast(s_axis_tx_tlast),
+
+        .finish(finish)
+    );
+
+
+    // -------------------------------------------------------------------------
+    // Simple LED status
+    // -------------------------------------------------------------------------
+    assign led[0] = clk_wiz_locked;
+    assign led[1] = m_axis_rx_tvalid;
+    assign led[2] = dac_start;
+
+endmodule

designs/reflectometer_prototype/Makefile

@@ -7,8 +7,8 @@
 #
 
 # FPGA settings
-FPGA_PART = xc7a35tfgg484-1
-FPGA_TOP = eth_ctrl_debug_top
+FPGA_PART = xc7a100tfgg484-2
+FPGA_TOP = prototype_top
 FPGA_ARCH = artix7
 
 RTL_DIR = ../../rtl
@@ -16,13 +16,14 @@ RTL_DIR = ../../rtl
 
 include ../../scripts/vivado.mk
 
-SYN_FILES += eth_ctrl_debug.sv
+SYN_FILES += prototype.sv
+SYN_FILES += ../reflectometer_base/reflectometer.sv
 SYN_FILES += $(sort $(shell find ../../rtl -type f \( -name '*.v' -o -name '*.sv' \)))
 
 XCI_FILES = $(sort $(shell find ../../rtl/ethernet-udp/src -type f -name '*.xci'))
 XCI_FILES += $(sort $(shell find ip/ -type f -name '*.xci'))
 
-XDC_FILES += ../../constraints/ax7a035b.xdc
+XDC_FILES += ../../constraints/ax7102.xdc
 XDC_FILES += debug.xdc
 
 

designs/reflectometer_prototype/README.md

@@ -0,0 +1,13 @@
+# Тестовый проект рефлектометра
+Проект состоит из AXIS Ethernet и основной части рефлектометра - генератора, сэмплера, контроллера и синхронизирующей логики. Разработан для AX7102, АЦП AN9238, ЦАП AD9767. Плата подключается по ethernet к компьютеру, IP должен быть 192.168.0.3 у компьютера, в ПЛИС установлен IP 192.168.0.2, после подключения должен пройти ARP и после этого можно начнить коммуникацию через консольку.
+## Сборка
+```make all``` - собрать все до битстрима
+
+```make vivado``` - открыть проект в Vivado
+
+## Управление
+Используйте software/console.py. Примеры:
+
+```python3 console.py --pulse_width 3500 --pulse_period 20000 --pulse_height 15000 --pulse_num 550 --dac-bits 14```
+
+```python3 console.py --pulse_width 15000 --pulse_period 20000 --pulse_height 1500 --pulse_num 550 --dac-bits 14```

designs/reflectometer_prototype/debug.xdc

@@ -0,0 +1,238 @@
+set_clock_groups -name ASYNC_UDP_CTRL -asynchronous -group [get_clocks rx_clk] -group [get_clocks clk_out1_clk_wiz_ctrl_inst] -group [get_clocks clk_out2_clk_wiz_ctrl_inst]
+
+
+
+
+connect_debug_port u_ila_0/clk [get_nets [list clk_wiz_ctrl_inst/inst/clk_out2]]
+connect_debug_port u_ila_0/probe0 [get_nets [list {accumulator_top_dut/output_async_fifo/wr_state[0]} {accumulator_top_dut/output_async_fifo/wr_state[1]} {accumulator_top_dut/output_async_fifo/wr_state[2]}]]
+connect_debug_port u_ila_0/probe1 [get_nets [list {sampler_dut/smp_num_reg[0]} {sampler_dut/smp_num_reg[1]} {sampler_dut/smp_num_reg[2]} {sampler_dut/smp_num_reg[3]} {sampler_dut/smp_num_reg[4]} {sampler_dut/smp_num_reg[5]} {sampler_dut/smp_num_reg[6]} {sampler_dut/smp_num_reg[7]} {sampler_dut/smp_num_reg[8]} {sampler_dut/smp_num_reg[9]} {sampler_dut/smp_num_reg[10]} {sampler_dut/smp_num_reg[11]} {sampler_dut/smp_num_reg[12]} {sampler_dut/smp_num_reg[13]} {sampler_dut/smp_num_reg[14]} {sampler_dut/smp_num_reg[15]} {sampler_dut/smp_num_reg[16]} {sampler_dut/smp_num_reg[17]} {sampler_dut/smp_num_reg[18]} {sampler_dut/smp_num_reg[19]} {sampler_dut/smp_num_reg[20]} {sampler_dut/smp_num_reg[21]} {sampler_dut/smp_num_reg[22]} {sampler_dut/smp_num_reg[23]} {sampler_dut/smp_num_reg[24]} {sampler_dut/smp_num_reg[25]} {sampler_dut/smp_num_reg[26]} {sampler_dut/smp_num_reg[27]} {sampler_dut/smp_num_reg[28]} {sampler_dut/smp_num_reg[29]} {sampler_dut/smp_num_reg[30]} {sampler_dut/smp_num_reg[31]}]]
+connect_debug_port u_ila_0/probe2 [get_nets [list {adc_pulse_num[0]} {adc_pulse_num[1]} {adc_pulse_num[2]} {adc_pulse_num[3]} {adc_pulse_num[4]} {adc_pulse_num[5]} {adc_pulse_num[6]} {adc_pulse_num[7]} {adc_pulse_num[8]} {adc_pulse_num[9]} {adc_pulse_num[10]} {adc_pulse_num[11]} {adc_pulse_num[12]} {adc_pulse_num[13]} {adc_pulse_num[14]} {adc_pulse_num[15]}]]
+connect_debug_port u_ila_0/probe4 [get_nets [list {accum_m_axis_tdata[0]} {accum_m_axis_tdata[1]} {accum_m_axis_tdata[2]} {accum_m_axis_tdata[3]} {accum_m_axis_tdata[4]} {accum_m_axis_tdata[5]} {accum_m_axis_tdata[6]} {accum_m_axis_tdata[7]} {accum_m_axis_tdata[8]} {accum_m_axis_tdata[9]} {accum_m_axis_tdata[10]} {accum_m_axis_tdata[11]}]]
+connect_debug_port u_ila_0/probe5 [get_nets [list {sampler_dut/cnt_smp_num[0]} {sampler_dut/cnt_smp_num[1]} {sampler_dut/cnt_smp_num[2]} {sampler_dut/cnt_smp_num[3]} {sampler_dut/cnt_smp_num[4]} {sampler_dut/cnt_smp_num[5]} {sampler_dut/cnt_smp_num[6]} {sampler_dut/cnt_smp_num[7]} {sampler_dut/cnt_smp_num[8]} {sampler_dut/cnt_smp_num[9]} {sampler_dut/cnt_smp_num[10]} {sampler_dut/cnt_smp_num[11]} {sampler_dut/cnt_smp_num[12]} {sampler_dut/cnt_smp_num[13]} {sampler_dut/cnt_smp_num[14]} {sampler_dut/cnt_smp_num[15]} {sampler_dut/cnt_smp_num[16]} {sampler_dut/cnt_smp_num[17]} {sampler_dut/cnt_smp_num[18]} {sampler_dut/cnt_smp_num[19]} {sampler_dut/cnt_smp_num[20]} {sampler_dut/cnt_smp_num[21]} {sampler_dut/cnt_smp_num[22]} {sampler_dut/cnt_smp_num[23]} {sampler_dut/cnt_smp_num[24]} {sampler_dut/cnt_smp_num[25]} {sampler_dut/cnt_smp_num[26]} {sampler_dut/cnt_smp_num[27]} {sampler_dut/cnt_smp_num[28]} {sampler_dut/cnt_smp_num[29]} {sampler_dut/cnt_smp_num[30]} {sampler_dut/cnt_smp_num[31]}]]
+connect_debug_port u_ila_0/probe6 [get_nets [list {sampler_dut/data_converted[0]} {sampler_dut/data_converted[1]} {sampler_dut/data_converted[2]} {sampler_dut/data_converted[3]} {sampler_dut/data_converted[4]} {sampler_dut/data_converted[5]} {sampler_dut/data_converted[6]} {sampler_dut/data_converted[7]} {sampler_dut/data_converted[8]} {sampler_dut/data_converted[9]} {sampler_dut/data_converted[10]} {sampler_dut/data_converted[11]}]]
+connect_debug_port u_ila_0/probe7 [get_nets [list {adc_pulse_period[0]} {adc_pulse_period[1]} {adc_pulse_period[2]} {adc_pulse_period[3]} {adc_pulse_period[4]} {adc_pulse_period[5]} {adc_pulse_period[6]} {adc_pulse_period[7]} {adc_pulse_period[8]} {adc_pulse_period[9]} {adc_pulse_period[10]} {adc_pulse_period[11]} {adc_pulse_period[12]} {adc_pulse_period[13]} {adc_pulse_period[14]} {adc_pulse_period[15]} {adc_pulse_period[16]} {adc_pulse_period[17]} {adc_pulse_period[18]} {adc_pulse_period[19]} {adc_pulse_period[20]} {adc_pulse_period[21]} {adc_pulse_period[22]} {adc_pulse_period[23]} {adc_pulse_period[24]} {adc_pulse_period[25]} {adc_pulse_period[26]} {adc_pulse_period[27]} {adc_pulse_period[28]} {adc_pulse_period[29]} {adc_pulse_period[30]} {adc_pulse_period[31]}]]
+connect_debug_port u_ila_0/probe8 [get_nets [list {accumulator_top_dut/accum_main/wr_state[0]} {accumulator_top_dut/accum_main/wr_state[1]} {accumulator_top_dut/accum_main/wr_state[2]} {accumulator_top_dut/accum_main/wr_state[3]}]]
+connect_debug_port u_ila_0/probe9 [get_nets [list {accumulator_top_dut/accum_main/adder_dut/cnt[0]} {accumulator_top_dut/accum_main/adder_dut/cnt[1]} {accumulator_top_dut/accum_main/adder_dut/cnt[2]} {accumulator_top_dut/accum_main/adder_dut/cnt[3]} {accumulator_top_dut/accum_main/adder_dut/cnt[4]} {accumulator_top_dut/accum_main/adder_dut/cnt[5]} {accumulator_top_dut/accum_main/adder_dut/cnt[6]} {accumulator_top_dut/accum_main/adder_dut/cnt[7]} {accumulator_top_dut/accum_main/adder_dut/cnt[8]} {accumulator_top_dut/accum_main/adder_dut/cnt[9]} {accumulator_top_dut/accum_main/adder_dut/cnt[10]} {accumulator_top_dut/accum_main/adder_dut/cnt[11]} {accumulator_top_dut/accum_main/adder_dut/cnt[12]} {accumulator_top_dut/accum_main/adder_dut/cnt[13]} {accumulator_top_dut/accum_main/adder_dut/cnt[14]} {accumulator_top_dut/accum_main/adder_dut/cnt[15]}]]
+connect_debug_port u_ila_0/probe10 [get_nets [list acum_m_axis_tvalid]]
+connect_debug_port u_ila_0/probe11 [get_nets [list adc_rst]]
+connect_debug_port u_ila_0/probe12 [get_nets [list adc_start]]
+connect_debug_port u_ila_0/probe13 [get_nets [list sampler_dut/enable]]
+connect_debug_port u_ila_0/probe14 [get_nets [list finish]]
+connect_debug_port u_ila_0/probe15 [get_nets [list sampler_dut/out_of_range_reg]]
+connect_debug_port u_ila_0/probe16 [get_nets [list sample_req]]
+connect_debug_port u_ila_1/clk [get_nets [list clk_wiz_ctrl_inst/inst/clk_out1]]
+connect_debug_port u_ila_1/probe0 [get_nets [list {generator_inst/pulse_num_reg[0]} {generator_inst/pulse_num_reg[1]} {generator_inst/pulse_num_reg[2]} {generator_inst/pulse_num_reg[3]} {generator_inst/pulse_num_reg[4]} {generator_inst/pulse_num_reg[5]} {generator_inst/pulse_num_reg[6]} {generator_inst/pulse_num_reg[7]} {generator_inst/pulse_num_reg[8]} {generator_inst/pulse_num_reg[9]} {generator_inst/pulse_num_reg[10]} {generator_inst/pulse_num_reg[11]} {generator_inst/pulse_num_reg[12]} {generator_inst/pulse_num_reg[13]} {generator_inst/pulse_num_reg[14]} {generator_inst/pulse_num_reg[15]}]]
+connect_debug_port u_ila_1/probe1 [get_nets [list {dac_pulse_num[0]} {dac_pulse_num[1]} {dac_pulse_num[2]} {dac_pulse_num[3]} {dac_pulse_num[4]} {dac_pulse_num[5]} {dac_pulse_num[6]} {dac_pulse_num[7]} {dac_pulse_num[8]} {dac_pulse_num[9]} {dac_pulse_num[10]} {dac_pulse_num[11]} {dac_pulse_num[12]} {dac_pulse_num[13]} {dac_pulse_num[14]} {dac_pulse_num[15]}]]
+connect_debug_port u_ila_1/probe2 [get_nets [list {dac_pulse_period[0]} {dac_pulse_period[1]} {dac_pulse_period[2]} {dac_pulse_period[3]} {dac_pulse_period[4]} {dac_pulse_period[5]} {dac_pulse_period[6]} {dac_pulse_period[7]} {dac_pulse_period[8]} {dac_pulse_period[9]} {dac_pulse_period[10]} {dac_pulse_period[11]} {dac_pulse_period[12]} {dac_pulse_period[13]} {dac_pulse_period[14]} {dac_pulse_period[15]} {dac_pulse_period[16]} {dac_pulse_period[17]} {dac_pulse_period[18]} {dac_pulse_period[19]} {dac_pulse_period[20]} {dac_pulse_period[21]} {dac_pulse_period[22]} {dac_pulse_period[23]} {dac_pulse_period[24]} {dac_pulse_period[25]} {dac_pulse_period[26]} {dac_pulse_period[27]} {dac_pulse_period[28]} {dac_pulse_period[29]} {dac_pulse_period[30]} {dac_pulse_period[31]}]]
+connect_debug_port u_ila_1/probe3 [get_nets [list {dac_pulse_width[0]} {dac_pulse_width[1]} {dac_pulse_width[2]} {dac_pulse_width[3]} {dac_pulse_width[4]} {dac_pulse_width[5]} {dac_pulse_width[6]} {dac_pulse_width[7]} {dac_pulse_width[8]} {dac_pulse_width[9]} {dac_pulse_width[10]} {dac_pulse_width[11]} {dac_pulse_width[12]} {dac_pulse_width[13]} {dac_pulse_width[14]} {dac_pulse_width[15]} {dac_pulse_width[16]} {dac_pulse_width[17]} {dac_pulse_width[18]} {dac_pulse_width[19]} {dac_pulse_width[20]} {dac_pulse_width[21]} {dac_pulse_width[22]} {dac_pulse_width[23]} {dac_pulse_width[24]} {dac_pulse_width[25]} {dac_pulse_width[26]} {dac_pulse_width[27]} {dac_pulse_width[28]} {dac_pulse_width[29]} {dac_pulse_width[30]} {dac_pulse_width[31]}]]
+connect_debug_port u_ila_1/probe4 [get_nets [list {generator_inst/cnt_pulse_num[0]} {generator_inst/cnt_pulse_num[1]} {generator_inst/cnt_pulse_num[2]} {generator_inst/cnt_pulse_num[3]} {generator_inst/cnt_pulse_num[4]} {generator_inst/cnt_pulse_num[5]} {generator_inst/cnt_pulse_num[6]} {generator_inst/cnt_pulse_num[7]} {generator_inst/cnt_pulse_num[8]} {generator_inst/cnt_pulse_num[9]} {generator_inst/cnt_pulse_num[10]} {generator_inst/cnt_pulse_num[11]} {generator_inst/cnt_pulse_num[12]} {generator_inst/cnt_pulse_num[13]} {generator_inst/cnt_pulse_num[14]} {generator_inst/cnt_pulse_num[15]}]]
+connect_debug_port u_ila_1/probe5 [get_nets [list {generator_inst/pulse_width_reg[0]} {generator_inst/pulse_width_reg[1]} {generator_inst/pulse_width_reg[2]} {generator_inst/pulse_width_reg[3]} {generator_inst/pulse_width_reg[4]} {generator_inst/pulse_width_reg[5]} {generator_inst/pulse_width_reg[6]} {generator_inst/pulse_width_reg[7]} {generator_inst/pulse_width_reg[8]} {generator_inst/pulse_width_reg[9]} {generator_inst/pulse_width_reg[10]} {generator_inst/pulse_width_reg[11]} {generator_inst/pulse_width_reg[12]} {generator_inst/pulse_width_reg[13]} {generator_inst/pulse_width_reg[14]} {generator_inst/pulse_width_reg[15]} {generator_inst/pulse_width_reg[16]} {generator_inst/pulse_width_reg[17]} {generator_inst/pulse_width_reg[18]} {generator_inst/pulse_width_reg[19]} {generator_inst/pulse_width_reg[20]} {generator_inst/pulse_width_reg[21]} {generator_inst/pulse_width_reg[22]} {generator_inst/pulse_width_reg[23]} {generator_inst/pulse_width_reg[24]} {generator_inst/pulse_width_reg[25]} {generator_inst/pulse_width_reg[26]} {generator_inst/pulse_width_reg[27]} {generator_inst/pulse_width_reg[28]} {generator_inst/pulse_width_reg[29]} {generator_inst/pulse_width_reg[30]} {generator_inst/pulse_width_reg[31]}]]
+connect_debug_port u_ila_1/probe6 [get_nets [list {generator_inst/pulse_period_reg[0]} {generator_inst/pulse_period_reg[1]} {generator_inst/pulse_period_reg[2]} {generator_inst/pulse_period_reg[3]} {generator_inst/pulse_period_reg[4]} {generator_inst/pulse_period_reg[5]} {generator_inst/pulse_period_reg[6]} {generator_inst/pulse_period_reg[7]} {generator_inst/pulse_period_reg[8]} {generator_inst/pulse_period_reg[9]} {generator_inst/pulse_period_reg[10]} {generator_inst/pulse_period_reg[11]} {generator_inst/pulse_period_reg[12]} {generator_inst/pulse_period_reg[13]} {generator_inst/pulse_period_reg[14]} {generator_inst/pulse_period_reg[15]} {generator_inst/pulse_period_reg[16]} {generator_inst/pulse_period_reg[17]} {generator_inst/pulse_period_reg[18]} {generator_inst/pulse_period_reg[19]} {generator_inst/pulse_period_reg[20]} {generator_inst/pulse_period_reg[21]} {generator_inst/pulse_period_reg[22]} {generator_inst/pulse_period_reg[23]} {generator_inst/pulse_period_reg[24]} {generator_inst/pulse_period_reg[25]} {generator_inst/pulse_period_reg[26]} {generator_inst/pulse_period_reg[27]} {generator_inst/pulse_period_reg[28]} {generator_inst/pulse_period_reg[29]} {generator_inst/pulse_period_reg[30]} {generator_inst/pulse_period_reg[31]}]]
+connect_debug_port u_ila_1/probe7 [get_nets [list {generator_inst/cnt_period[0]} {generator_inst/cnt_period[1]} {generator_inst/cnt_period[2]} {generator_inst/cnt_period[3]} {generator_inst/cnt_period[4]} {generator_inst/cnt_period[5]} {generator_inst/cnt_period[6]} {generator_inst/cnt_period[7]} {generator_inst/cnt_period[8]} {generator_inst/cnt_period[9]} {generator_inst/cnt_period[10]} {generator_inst/cnt_period[11]} {generator_inst/cnt_period[12]} {generator_inst/cnt_period[13]} {generator_inst/cnt_period[14]} {generator_inst/cnt_period[15]} {generator_inst/cnt_period[16]} {generator_inst/cnt_period[17]} {generator_inst/cnt_period[18]} {generator_inst/cnt_period[19]} {generator_inst/cnt_period[20]} {generator_inst/cnt_period[21]} {generator_inst/cnt_period[22]} {generator_inst/cnt_period[23]} {generator_inst/cnt_period[24]} {generator_inst/cnt_period[25]} {generator_inst/cnt_period[26]} {generator_inst/cnt_period[27]} {generator_inst/cnt_period[28]} {generator_inst/cnt_period[29]} {generator_inst/cnt_period[30]} {generator_inst/cnt_period[31]}]]
+connect_debug_port u_ila_1/probe8 [get_nets [list dac_rst]]
+connect_debug_port u_ila_1/probe9 [get_nets [list dac_start]]
+connect_debug_port u_ila_1/probe10 [get_nets [list debug_dac_OBUF]]
+connect_debug_port u_ila_1/probe11 [get_nets [list generator_inst/enable]]
+connect_debug_port u_ila_1/probe12 [get_nets [list sample_done]]
+connect_debug_port u_ila_2/clk [get_nets [list rgmii_rxc_IBUF_BUFG]]
+connect_debug_port u_ila_2/probe0 [get_nets [list {accumulator_top_dut/output_async_fifo/rd_state[0]} {accumulator_top_dut/output_async_fifo/rd_state[1]} {accumulator_top_dut/output_async_fifo/rd_state[2]}]]
+connect_debug_port dbg_hub/clk [get_nets rgmii_rxc_IBUF_BUFG]
+
+create_debug_core u_ila_0 ila
+set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_0]
+set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_0]
+set_property C_ADV_TRIGGER false [get_debug_cores u_ila_0]
+set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_0]
+set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_0]
+set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_0]
+set_property C_TRIGIN_EN false [get_debug_cores u_ila_0]
+set_property C_TRIGOUT_EN false [get_debug_cores u_ila_0]
+set_property port_width 1 [get_debug_ports u_ila_0/clk]
+connect_debug_port u_ila_0/clk [get_nets [list reflectometer_inst/clk_wiz_ctrl_inst/inst/clk_out2]]
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe0]
+set_property port_width 4 [get_debug_ports u_ila_0/probe0]
+connect_debug_port u_ila_0/probe0 [get_nets [list {reflectometer_inst/accumulator_top_dut/accum_main/wr_state[0]} {reflectometer_inst/accumulator_top_dut/accum_main/wr_state[1]} {reflectometer_inst/accumulator_top_dut/accum_main/wr_state[2]} {reflectometer_inst/accumulator_top_dut/accum_main/wr_state[3]}]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe1]
+set_property port_width 3 [get_debug_ports u_ila_0/probe1]
+connect_debug_port u_ila_0/probe1 [get_nets [list {reflectometer_inst/accumulator_top_dut/output_async_fifo/wr_state[0]} {reflectometer_inst/accumulator_top_dut/output_async_fifo/wr_state[1]} {reflectometer_inst/accumulator_top_dut/output_async_fifo/wr_state[2]}]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe2]
+set_property port_width 32 [get_debug_ports u_ila_0/probe2]
+connect_debug_port u_ila_0/probe2 [get_nets [list {reflectometer_inst/sampler_dut/cnt_smp_num[0]} {reflectometer_inst/sampler_dut/cnt_smp_num[1]} {reflectometer_inst/sampler_dut/cnt_smp_num[2]} {reflectometer_inst/sampler_dut/cnt_smp_num[3]} {reflectometer_inst/sampler_dut/cnt_smp_num[4]} {reflectometer_inst/sampler_dut/cnt_smp_num[5]} {reflectometer_inst/sampler_dut/cnt_smp_num[6]} {reflectometer_inst/sampler_dut/cnt_smp_num[7]} {reflectometer_inst/sampler_dut/cnt_smp_num[8]} {reflectometer_inst/sampler_dut/cnt_smp_num[9]} {reflectometer_inst/sampler_dut/cnt_smp_num[10]} {reflectometer_inst/sampler_dut/cnt_smp_num[11]} {reflectometer_inst/sampler_dut/cnt_smp_num[12]} {reflectometer_inst/sampler_dut/cnt_smp_num[13]} {reflectometer_inst/sampler_dut/cnt_smp_num[14]} {reflectometer_inst/sampler_dut/cnt_smp_num[15]} {reflectometer_inst/sampler_dut/cnt_smp_num[16]} {reflectometer_inst/sampler_dut/cnt_smp_num[17]} {reflectometer_inst/sampler_dut/cnt_smp_num[18]} {reflectometer_inst/sampler_dut/cnt_smp_num[19]} {reflectometer_inst/sampler_dut/cnt_smp_num[20]} {reflectometer_inst/sampler_dut/cnt_smp_num[21]} {reflectometer_inst/sampler_dut/cnt_smp_num[22]} {reflectometer_inst/sampler_dut/cnt_smp_num[23]} {reflectometer_inst/sampler_dut/cnt_smp_num[24]} {reflectometer_inst/sampler_dut/cnt_smp_num[25]} {reflectometer_inst/sampler_dut/cnt_smp_num[26]} {reflectometer_inst/sampler_dut/cnt_smp_num[27]} {reflectometer_inst/sampler_dut/cnt_smp_num[28]} {reflectometer_inst/sampler_dut/cnt_smp_num[29]} {reflectometer_inst/sampler_dut/cnt_smp_num[30]} {reflectometer_inst/sampler_dut/cnt_smp_num[31]}]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe3]
+set_property port_width 12 [get_debug_ports u_ila_0/probe3]
+connect_debug_port u_ila_0/probe3 [get_nets [list {reflectometer_inst/sampler_dut/data_converted[0]} {reflectometer_inst/sampler_dut/data_converted[1]} {reflectometer_inst/sampler_dut/data_converted[2]} {reflectometer_inst/sampler_dut/data_converted[3]} {reflectometer_inst/sampler_dut/data_converted[4]} {reflectometer_inst/sampler_dut/data_converted[5]} {reflectometer_inst/sampler_dut/data_converted[6]} {reflectometer_inst/sampler_dut/data_converted[7]} {reflectometer_inst/sampler_dut/data_converted[8]} {reflectometer_inst/sampler_dut/data_converted[9]} {reflectometer_inst/sampler_dut/data_converted[10]} {reflectometer_inst/sampler_dut/data_converted[11]}]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe4]
+set_property port_width 32 [get_debug_ports u_ila_0/probe4]
+connect_debug_port u_ila_0/probe4 [get_nets [list {reflectometer_inst/sampler_dut/smp_num_reg[0]} {reflectometer_inst/sampler_dut/smp_num_reg[1]} {reflectometer_inst/sampler_dut/smp_num_reg[2]} {reflectometer_inst/sampler_dut/smp_num_reg[3]} {reflectometer_inst/sampler_dut/smp_num_reg[4]} {reflectometer_inst/sampler_dut/smp_num_reg[5]} {reflectometer_inst/sampler_dut/smp_num_reg[6]} {reflectometer_inst/sampler_dut/smp_num_reg[7]} {reflectometer_inst/sampler_dut/smp_num_reg[8]} {reflectometer_inst/sampler_dut/smp_num_reg[9]} {reflectometer_inst/sampler_dut/smp_num_reg[10]} {reflectometer_inst/sampler_dut/smp_num_reg[11]} {reflectometer_inst/sampler_dut/smp_num_reg[12]} {reflectometer_inst/sampler_dut/smp_num_reg[13]} {reflectometer_inst/sampler_dut/smp_num_reg[14]} {reflectometer_inst/sampler_dut/smp_num_reg[15]} {reflectometer_inst/sampler_dut/smp_num_reg[16]} {reflectometer_inst/sampler_dut/smp_num_reg[17]} {reflectometer_inst/sampler_dut/smp_num_reg[18]} {reflectometer_inst/sampler_dut/smp_num_reg[19]} {reflectometer_inst/sampler_dut/smp_num_reg[20]} {reflectometer_inst/sampler_dut/smp_num_reg[21]} {reflectometer_inst/sampler_dut/smp_num_reg[22]} {reflectometer_inst/sampler_dut/smp_num_reg[23]} {reflectometer_inst/sampler_dut/smp_num_reg[24]} {reflectometer_inst/sampler_dut/smp_num_reg[25]} {reflectometer_inst/sampler_dut/smp_num_reg[26]} {reflectometer_inst/sampler_dut/smp_num_reg[27]} {reflectometer_inst/sampler_dut/smp_num_reg[28]} {reflectometer_inst/sampler_dut/smp_num_reg[29]} {reflectometer_inst/sampler_dut/smp_num_reg[30]} {reflectometer_inst/sampler_dut/smp_num_reg[31]}]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe5]
+set_property port_width 12 [get_debug_ports u_ila_0/probe5]
+connect_debug_port u_ila_0/probe5 [get_nets [list {reflectometer_inst/accum_m_axis_tdata[0]} {reflectometer_inst/accum_m_axis_tdata[1]} {reflectometer_inst/accum_m_axis_tdata[2]} {reflectometer_inst/accum_m_axis_tdata[3]} {reflectometer_inst/accum_m_axis_tdata[4]} {reflectometer_inst/accum_m_axis_tdata[5]} {reflectometer_inst/accum_m_axis_tdata[6]} {reflectometer_inst/accum_m_axis_tdata[7]} {reflectometer_inst/accum_m_axis_tdata[8]} {reflectometer_inst/accum_m_axis_tdata[9]} {reflectometer_inst/accum_m_axis_tdata[10]} {reflectometer_inst/accum_m_axis_tdata[11]}]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe6]
+set_property port_width 16 [get_debug_ports u_ila_0/probe6]
+connect_debug_port u_ila_0/probe6 [get_nets [list {reflectometer_inst/adc_pulse_num[0]} {reflectometer_inst/adc_pulse_num[1]} {reflectometer_inst/adc_pulse_num[2]} {reflectometer_inst/adc_pulse_num[3]} {reflectometer_inst/adc_pulse_num[4]} {reflectometer_inst/adc_pulse_num[5]} {reflectometer_inst/adc_pulse_num[6]} {reflectometer_inst/adc_pulse_num[7]} {reflectometer_inst/adc_pulse_num[8]} {reflectometer_inst/adc_pulse_num[9]} {reflectometer_inst/adc_pulse_num[10]} {reflectometer_inst/adc_pulse_num[11]} {reflectometer_inst/adc_pulse_num[12]} {reflectometer_inst/adc_pulse_num[13]} {reflectometer_inst/adc_pulse_num[14]} {reflectometer_inst/adc_pulse_num[15]}]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe7]
+set_property port_width 32 [get_debug_ports u_ila_0/probe7]
+connect_debug_port u_ila_0/probe7 [get_nets [list {reflectometer_inst/adc_pulse_period[0]} {reflectometer_inst/adc_pulse_period[1]} {reflectometer_inst/adc_pulse_period[2]} {reflectometer_inst/adc_pulse_period[3]} {reflectometer_inst/adc_pulse_period[4]} {reflectometer_inst/adc_pulse_period[5]} {reflectometer_inst/adc_pulse_period[6]} {reflectometer_inst/adc_pulse_period[7]} {reflectometer_inst/adc_pulse_period[8]} {reflectometer_inst/adc_pulse_period[9]} {reflectometer_inst/adc_pulse_period[10]} {reflectometer_inst/adc_pulse_period[11]} {reflectometer_inst/adc_pulse_period[12]} {reflectometer_inst/adc_pulse_period[13]} {reflectometer_inst/adc_pulse_period[14]} {reflectometer_inst/adc_pulse_period[15]} {reflectometer_inst/adc_pulse_period[16]} {reflectometer_inst/adc_pulse_period[17]} {reflectometer_inst/adc_pulse_period[18]} {reflectometer_inst/adc_pulse_period[19]} {reflectometer_inst/adc_pulse_period[20]} {reflectometer_inst/adc_pulse_period[21]} {reflectometer_inst/adc_pulse_period[22]} {reflectometer_inst/adc_pulse_period[23]} {reflectometer_inst/adc_pulse_period[24]} {reflectometer_inst/adc_pulse_period[25]} {reflectometer_inst/adc_pulse_period[26]} {reflectometer_inst/adc_pulse_period[27]} {reflectometer_inst/adc_pulse_period[28]} {reflectometer_inst/adc_pulse_period[29]} {reflectometer_inst/adc_pulse_period[30]} {reflectometer_inst/adc_pulse_period[31]}]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe8]
+set_property port_width 12 [get_debug_ports u_ila_0/probe8]
+connect_debug_port u_ila_0/probe8 [get_nets [list {ch2_data_IBUF[0]} {ch2_data_IBUF[1]} {ch2_data_IBUF[2]} {ch2_data_IBUF[3]} {ch2_data_IBUF[4]} {ch2_data_IBUF[5]} {ch2_data_IBUF[6]} {ch2_data_IBUF[7]} {ch2_data_IBUF[8]} {ch2_data_IBUF[9]} {ch2_data_IBUF[10]} {ch2_data_IBUF[11]}]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe9]
+set_property port_width 1 [get_debug_ports u_ila_0/probe9]
+connect_debug_port u_ila_0/probe9 [get_nets [list reflectometer_inst/acum_m_axis_tvalid]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe10]
+set_property port_width 1 [get_debug_ports u_ila_0/probe10]
+connect_debug_port u_ila_0/probe10 [get_nets [list reflectometer_inst/adc_rst]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe11]
+set_property port_width 1 [get_debug_ports u_ila_0/probe11]
+connect_debug_port u_ila_0/probe11 [get_nets [list reflectometer_inst/adc_start]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe12]
+set_property port_width 1 [get_debug_ports u_ila_0/probe12]
+connect_debug_port u_ila_0/probe12 [get_nets [list reflectometer_inst/sampler_dut/buffer_ready]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe13]
+set_property port_width 1 [get_debug_ports u_ila_0/probe13]
+connect_debug_port u_ila_0/probe13 [get_nets [list reflectometer_inst/sampler_dut/enable]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe14]
+set_property port_width 1 [get_debug_ports u_ila_0/probe14]
+connect_debug_port u_ila_0/probe14 [get_nets [list reflectometer_inst/finish]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe15]
+set_property port_width 1 [get_debug_ports u_ila_0/probe15]
+connect_debug_port u_ila_0/probe15 [get_nets [list reflectometer_inst/sampler_dut/out_of_range_reg]]
+create_debug_port u_ila_0 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe16]
+set_property port_width 1 [get_debug_ports u_ila_0/probe16]
+connect_debug_port u_ila_0/probe16 [get_nets [list reflectometer_inst/sample_req]]
+create_debug_core u_ila_1 ila
+set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_1]
+set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_1]
+set_property C_ADV_TRIGGER false [get_debug_cores u_ila_1]
+set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_1]
+set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_1]
+set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_1]
+set_property C_TRIGIN_EN false [get_debug_cores u_ila_1]
+set_property C_TRIGOUT_EN false [get_debug_cores u_ila_1]
+set_property port_width 1 [get_debug_ports u_ila_1/clk]
+connect_debug_port u_ila_1/clk [get_nets [list reflectometer_inst/clk_wiz_ctrl_inst/inst/clk_out1]]
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe0]
+set_property port_width 32 [get_debug_ports u_ila_1/probe0]
+connect_debug_port u_ila_1/probe0 [get_nets [list {reflectometer_inst/generator_inst/cnt_period[0]} {reflectometer_inst/generator_inst/cnt_period[1]} {reflectometer_inst/generator_inst/cnt_period[2]} {reflectometer_inst/generator_inst/cnt_period[3]} {reflectometer_inst/generator_inst/cnt_period[4]} {reflectometer_inst/generator_inst/cnt_period[5]} {reflectometer_inst/generator_inst/cnt_period[6]} {reflectometer_inst/generator_inst/cnt_period[7]} {reflectometer_inst/generator_inst/cnt_period[8]} {reflectometer_inst/generator_inst/cnt_period[9]} {reflectometer_inst/generator_inst/cnt_period[10]} {reflectometer_inst/generator_inst/cnt_period[11]} {reflectometer_inst/generator_inst/cnt_period[12]} {reflectometer_inst/generator_inst/cnt_period[13]} {reflectometer_inst/generator_inst/cnt_period[14]} {reflectometer_inst/generator_inst/cnt_period[15]} {reflectometer_inst/generator_inst/cnt_period[16]} {reflectometer_inst/generator_inst/cnt_period[17]} {reflectometer_inst/generator_inst/cnt_period[18]} {reflectometer_inst/generator_inst/cnt_period[19]} {reflectometer_inst/generator_inst/cnt_period[20]} {reflectometer_inst/generator_inst/cnt_period[21]} {reflectometer_inst/generator_inst/cnt_period[22]} {reflectometer_inst/generator_inst/cnt_period[23]} {reflectometer_inst/generator_inst/cnt_period[24]} {reflectometer_inst/generator_inst/cnt_period[25]} {reflectometer_inst/generator_inst/cnt_period[26]} {reflectometer_inst/generator_inst/cnt_period[27]} {reflectometer_inst/generator_inst/cnt_period[28]} {reflectometer_inst/generator_inst/cnt_period[29]} {reflectometer_inst/generator_inst/cnt_period[30]} {reflectometer_inst/generator_inst/cnt_period[31]}]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe1]
+set_property port_width 16 [get_debug_ports u_ila_1/probe1]
+connect_debug_port u_ila_1/probe1 [get_nets [list {reflectometer_inst/generator_inst/cnt_pulse_num[0]} {reflectometer_inst/generator_inst/cnt_pulse_num[1]} {reflectometer_inst/generator_inst/cnt_pulse_num[2]} {reflectometer_inst/generator_inst/cnt_pulse_num[3]} {reflectometer_inst/generator_inst/cnt_pulse_num[4]} {reflectometer_inst/generator_inst/cnt_pulse_num[5]} {reflectometer_inst/generator_inst/cnt_pulse_num[6]} {reflectometer_inst/generator_inst/cnt_pulse_num[7]} {reflectometer_inst/generator_inst/cnt_pulse_num[8]} {reflectometer_inst/generator_inst/cnt_pulse_num[9]} {reflectometer_inst/generator_inst/cnt_pulse_num[10]} {reflectometer_inst/generator_inst/cnt_pulse_num[11]} {reflectometer_inst/generator_inst/cnt_pulse_num[12]} {reflectometer_inst/generator_inst/cnt_pulse_num[13]} {reflectometer_inst/generator_inst/cnt_pulse_num[14]} {reflectometer_inst/generator_inst/cnt_pulse_num[15]}]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe2]
+set_property port_width 14 [get_debug_ports u_ila_1/probe2]
+connect_debug_port u_ila_1/probe2 [get_nets [list {reflectometer_inst/dac_pulse_height[0]} {reflectometer_inst/dac_pulse_height[1]} {reflectometer_inst/dac_pulse_height[2]} {reflectometer_inst/dac_pulse_height[3]} {reflectometer_inst/dac_pulse_height[4]} {reflectometer_inst/dac_pulse_height[5]} {reflectometer_inst/dac_pulse_height[6]} {reflectometer_inst/dac_pulse_height[7]} {reflectometer_inst/dac_pulse_height[8]} {reflectometer_inst/dac_pulse_height[9]} {reflectometer_inst/dac_pulse_height[10]} {reflectometer_inst/dac_pulse_height[11]} {reflectometer_inst/dac_pulse_height[12]} {reflectometer_inst/dac_pulse_height[13]}]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe3]
+set_property port_width 32 [get_debug_ports u_ila_1/probe3]
+connect_debug_port u_ila_1/probe3 [get_nets [list {reflectometer_inst/dac_pulse_width[0]} {reflectometer_inst/dac_pulse_width[1]} {reflectometer_inst/dac_pulse_width[2]} {reflectometer_inst/dac_pulse_width[3]} {reflectometer_inst/dac_pulse_width[4]} {reflectometer_inst/dac_pulse_width[5]} {reflectometer_inst/dac_pulse_width[6]} {reflectometer_inst/dac_pulse_width[7]} {reflectometer_inst/dac_pulse_width[8]} {reflectometer_inst/dac_pulse_width[9]} {reflectometer_inst/dac_pulse_width[10]} {reflectometer_inst/dac_pulse_width[11]} {reflectometer_inst/dac_pulse_width[12]} {reflectometer_inst/dac_pulse_width[13]} {reflectometer_inst/dac_pulse_width[14]} {reflectometer_inst/dac_pulse_width[15]} {reflectometer_inst/dac_pulse_width[16]} {reflectometer_inst/dac_pulse_width[17]} {reflectometer_inst/dac_pulse_width[18]} {reflectometer_inst/dac_pulse_width[19]} {reflectometer_inst/dac_pulse_width[20]} {reflectometer_inst/dac_pulse_width[21]} {reflectometer_inst/dac_pulse_width[22]} {reflectometer_inst/dac_pulse_width[23]} {reflectometer_inst/dac_pulse_width[24]} {reflectometer_inst/dac_pulse_width[25]} {reflectometer_inst/dac_pulse_width[26]} {reflectometer_inst/dac_pulse_width[27]} {reflectometer_inst/dac_pulse_width[28]} {reflectometer_inst/dac_pulse_width[29]} {reflectometer_inst/dac_pulse_width[30]} {reflectometer_inst/dac_pulse_width[31]}]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe4]
+set_property port_width 16 [get_debug_ports u_ila_1/probe4]
+connect_debug_port u_ila_1/probe4 [get_nets [list {reflectometer_inst/dac_pulse_num[0]} {reflectometer_inst/dac_pulse_num[1]} {reflectometer_inst/dac_pulse_num[2]} {reflectometer_inst/dac_pulse_num[3]} {reflectometer_inst/dac_pulse_num[4]} {reflectometer_inst/dac_pulse_num[5]} {reflectometer_inst/dac_pulse_num[6]} {reflectometer_inst/dac_pulse_num[7]} {reflectometer_inst/dac_pulse_num[8]} {reflectometer_inst/dac_pulse_num[9]} {reflectometer_inst/dac_pulse_num[10]} {reflectometer_inst/dac_pulse_num[11]} {reflectometer_inst/dac_pulse_num[12]} {reflectometer_inst/dac_pulse_num[13]} {reflectometer_inst/dac_pulse_num[14]} {reflectometer_inst/dac_pulse_num[15]}]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe5]
+set_property port_width 32 [get_debug_ports u_ila_1/probe5]
+connect_debug_port u_ila_1/probe5 [get_nets [list {reflectometer_inst/dac_pulse_period[0]} {reflectometer_inst/dac_pulse_period[1]} {reflectometer_inst/dac_pulse_period[2]} {reflectometer_inst/dac_pulse_period[3]} {reflectometer_inst/dac_pulse_period[4]} {reflectometer_inst/dac_pulse_period[5]} {reflectometer_inst/dac_pulse_period[6]} {reflectometer_inst/dac_pulse_period[7]} {reflectometer_inst/dac_pulse_period[8]} {reflectometer_inst/dac_pulse_period[9]} {reflectometer_inst/dac_pulse_period[10]} {reflectometer_inst/dac_pulse_period[11]} {reflectometer_inst/dac_pulse_period[12]} {reflectometer_inst/dac_pulse_period[13]} {reflectometer_inst/dac_pulse_period[14]} {reflectometer_inst/dac_pulse_period[15]} {reflectometer_inst/dac_pulse_period[16]} {reflectometer_inst/dac_pulse_period[17]} {reflectometer_inst/dac_pulse_period[18]} {reflectometer_inst/dac_pulse_period[19]} {reflectometer_inst/dac_pulse_period[20]} {reflectometer_inst/dac_pulse_period[21]} {reflectometer_inst/dac_pulse_period[22]} {reflectometer_inst/dac_pulse_period[23]} {reflectometer_inst/dac_pulse_period[24]} {reflectometer_inst/dac_pulse_period[25]} {reflectometer_inst/dac_pulse_period[26]} {reflectometer_inst/dac_pulse_period[27]} {reflectometer_inst/dac_pulse_period[28]} {reflectometer_inst/dac_pulse_period[29]} {reflectometer_inst/dac_pulse_period[30]} {reflectometer_inst/dac_pulse_period[31]}]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe6]
+set_property port_width 14 [get_debug_ports u_ila_1/probe6]
+connect_debug_port u_ila_1/probe6 [get_nets [list {reflectometer_inst/p2_data[0]} {reflectometer_inst/p2_data[1]} {reflectometer_inst/p2_data[2]} {reflectometer_inst/p2_data[3]} {reflectometer_inst/p2_data[4]} {reflectometer_inst/p2_data[5]} {reflectometer_inst/p2_data[6]} {reflectometer_inst/p2_data[7]} {reflectometer_inst/p2_data[8]} {reflectometer_inst/p2_data[9]} {reflectometer_inst/p2_data[10]} {reflectometer_inst/p2_data[11]} {reflectometer_inst/p2_data[12]} {reflectometer_inst/p2_data[13]}]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe7]
+set_property port_width 1 [get_debug_ports u_ila_1/probe7]
+connect_debug_port u_ila_1/probe7 [get_nets [list reflectometer_inst/dac_rst]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe8]
+set_property port_width 1 [get_debug_ports u_ila_1/probe8]
+connect_debug_port u_ila_1/probe8 [get_nets [list reflectometer_inst/dac_start]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe9]
+set_property port_width 1 [get_debug_ports u_ila_1/probe9]
+connect_debug_port u_ila_1/probe9 [get_nets [list reflectometer_inst/generator_inst/enable]]
+create_debug_port u_ila_1 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_1/probe10]
+set_property port_width 1 [get_debug_ports u_ila_1/probe10]
+connect_debug_port u_ila_1/probe10 [get_nets [list reflectometer_inst/sample_done]]
+create_debug_core u_ila_2 ila
+set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_2]
+set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_2]
+set_property C_ADV_TRIGGER false [get_debug_cores u_ila_2]
+set_property C_DATA_DEPTH 1024 [get_debug_cores u_ila_2]
+set_property C_EN_STRG_QUAL false [get_debug_cores u_ila_2]
+set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_2]
+set_property C_TRIGIN_EN false [get_debug_cores u_ila_2]
+set_property C_TRIGOUT_EN false [get_debug_cores u_ila_2]
+set_property port_width 1 [get_debug_ports u_ila_2/clk]
+connect_debug_port u_ila_2/clk [get_nets [list e_gtxc_OBUF_BUFG]]
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe0]
+set_property port_width 8 [get_debug_ports u_ila_2/probe0]
+connect_debug_port u_ila_2/probe0 [get_nets [list {m_axis_rx_tdata[0]} {m_axis_rx_tdata[1]} {m_axis_rx_tdata[2]} {m_axis_rx_tdata[3]} {m_axis_rx_tdata[4]} {m_axis_rx_tdata[5]} {m_axis_rx_tdata[6]} {m_axis_rx_tdata[7]}]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe1]
+set_property port_width 8 [get_debug_ports u_ila_2/probe1]
+connect_debug_port u_ila_2/probe1 [get_nets [list {s_axis_tx_tdata[0]} {s_axis_tx_tdata[1]} {s_axis_tx_tdata[2]} {s_axis_tx_tdata[3]} {s_axis_tx_tdata[4]} {s_axis_tx_tdata[5]} {s_axis_tx_tdata[6]} {s_axis_tx_tdata[7]}]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe2]
+set_property port_width 3 [get_debug_ports u_ila_2/probe2]
+connect_debug_port u_ila_2/probe2 [get_nets [list {reflectometer_inst/accumulator_top_dut/output_async_fifo/rd_state[0]} {reflectometer_inst/accumulator_top_dut/output_async_fifo/rd_state[1]} {reflectometer_inst/accumulator_top_dut/output_async_fifo/rd_state[2]}]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe3]
+set_property port_width 3 [get_debug_ports u_ila_2/probe3]
+connect_debug_port u_ila_2/probe3 [get_nets [list {reflectometer_inst/udp_ctrl_inst/eth_state[0]} {reflectometer_inst/udp_ctrl_inst/eth_state[1]} {reflectometer_inst/udp_ctrl_inst/eth_state[2]}]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe4]
+set_property port_width 1 [get_debug_ports u_ila_2/probe4]
+connect_debug_port u_ila_2/probe4 [get_nets [list reflectometer_inst/udp_ctrl_inst/busy_flag_eth]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe5]
+set_property port_width 1 [get_debug_ports u_ila_2/probe5]
+connect_debug_port u_ila_2/probe5 [get_nets [list m_axis_rx_tlast]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe6]
+set_property port_width 1 [get_debug_ports u_ila_2/probe6]
+connect_debug_port u_ila_2/probe6 [get_nets [list m_axis_rx_tready]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe7]
+set_property port_width 1 [get_debug_ports u_ila_2/probe7]
+connect_debug_port u_ila_2/probe7 [get_nets [list m_axis_rx_tvalid]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe8]
+set_property port_width 1 [get_debug_ports u_ila_2/probe8]
+connect_debug_port u_ila_2/probe8 [get_nets [list req_ready]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe9]
+set_property port_width 1 [get_debug_ports u_ila_2/probe9]
+connect_debug_port u_ila_2/probe9 [get_nets [list s_axis_tx_tlast]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe10]
+set_property port_width 1 [get_debug_ports u_ila_2/probe10]
+connect_debug_port u_ila_2/probe10 [get_nets [list s_axis_tx_tready]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe11]
+set_property port_width 1 [get_debug_ports u_ila_2/probe11]
+connect_debug_port u_ila_2/probe11 [get_nets [list s_axis_tx_tvalid]]
+create_debug_port u_ila_2 probe
+set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_2/probe12]
+set_property port_width 1 [get_debug_ports u_ila_2/probe12]
+connect_debug_port u_ila_2/probe12 [get_nets [list send_req]]
+set_property C_CLK_INPUT_FREQ_HZ 300000000 [get_debug_cores dbg_hub]
+set_property C_ENABLE_CLK_DIVIDER false [get_debug_cores dbg_hub]
+set_property C_USER_SCAN_CHAIN 1 [get_debug_cores dbg_hub]
+connect_debug_port dbg_hub/clk [get_nets e_gtxc_OBUF_BUFG]

designs/reflectometer_prototype/ip/clk_wiz_ctrl_inst.xci

@@ -4,7 +4,7 @@
     "xci_name": "clk_wiz_ctrl_inst",
     "component_reference": "xilinx.com:ip:clk_wiz:6.0",
     "ip_revision": "16",
-    "gen_directory": "../../../../eth_ctrl_debug_top.gen/sources_1/ip/clk_wiz_ctrl_inst",
+    "gen_directory": "../../../../eth_generator_top.gen/sources_1/ip/clk_wiz_ctrl_inst",
     "parameters": {
       "component_parameters": {
         "Component_Name": [ { "value": "clk_wiz_ctrl_inst", "resolve_type": "user", "usage": "all" } ],
@@ -84,7 +84,7 @@
         "PSEN_PORT": [ { "value": "psen", "resolve_type": "user", "usage": "all" } ],
         "PSINCDEC_PORT": [ { "value": "psincdec", "resolve_type": "user", "usage": "all" } ],
         "PSDONE_PORT": [ { "value": "psdone", "resolve_type": "user", "usage": "all" } ],
-        "CLKOUT1_REQUESTED_OUT_FREQ": [ { "value": "130.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT1_REQUESTED_OUT_FREQ": [ { "value": "125", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "CLKOUT1_REQUESTED_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "CLKOUT1_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "CLKOUT2_REQUESTED_OUT_FREQ": [ { "value": "65.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
@@ -154,9 +154,9 @@
         "SS_MOD_TIME": [ { "value": "0.004", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "OVERRIDE_MMCM": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "MMCM_NOTES": [ { "value": "None", "resolve_type": "user", "usage": "all" } ],
-        "MMCM_DIVCLK_DIVIDE": [ { "value": "1", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_DIVCLK_DIVIDE": [ { "value": "4", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
         "MMCM_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "user", "usage": "all" } ],
-        "MMCM_CLKFBOUT_MULT_F": [ { "value": "4.875", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKFBOUT_MULT_F": [ { "value": "16.875", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_CLKFBOUT_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_CLKFBOUT_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "MMCM_CLKIN1_PERIOD": [ { "value": "5.000", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
@@ -167,11 +167,11 @@
         "MMCM_REF_JITTER1": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_REF_JITTER2": [ { "value": "0.010", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_STARTUP_WAIT": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT0_DIVIDE_F": [ { "value": "7.500", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "MMCM_CLKOUT0_DIVIDE_F": [ { "value": "6.750", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_CLKOUT0_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_CLKOUT0_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_CLKOUT0_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
-        "MMCM_CLKOUT1_DIVIDE": [ { "value": "15", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
+        "MMCM_CLKOUT1_DIVIDE": [ { "value": "13", "value_src": "user", "resolve_type": "user", "format": "long", "usage": "all" } ],
         "MMCM_CLKOUT1_DUTY_CYCLE": [ { "value": "0.500", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_CLKOUT1_PHASE": [ { "value": "0.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "MMCM_CLKOUT1_USE_FINE_PS": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
@@ -245,10 +245,10 @@
         "CDDCREQ_PORT": [ { "value": "cddcreq", "resolve_type": "user", "usage": "all" } ],
         "ENABLE_CLKOUTPHY": [ { "value": "false", "resolve_type": "user", "format": "bool", "usage": "all" } ],
         "CLKOUTPHY_REQUESTED_FREQ": [ { "value": "600.000", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT1_JITTER": [ { "value": "102.676", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT1_PHASE_ERROR": [ { "value": "87.159", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT2_JITTER": [ { "value": "117.878", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
-        "CLKOUT2_PHASE_ERROR": [ { "value": "87.159", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT1_JITTER": [ { "value": "162.582", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT1_PHASE_ERROR": [ { "value": "137.238", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT2_JITTER": [ { "value": "185.296", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
+        "CLKOUT2_PHASE_ERROR": [ { "value": "137.238", "value_src": "user", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "CLKOUT3_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "CLKOUT3_PHASE_ERROR": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
         "CLKOUT4_JITTER": [ { "value": "0.0", "resolve_type": "user", "format": "float", "usage": "all" } ],
@@ -338,14 +338,14 @@
         "C_INCLK_SUM_ROW2": [ { "value": "no_secondary_input_clock ", "resolve_type": "generated", "usage": "all" } ],
         "C_OUTCLK_SUM_ROW0A": [ { "value": " Output     Output      Phase    Duty Cycle   Pk-to-Pk     Phase", "resolve_type": "generated", "usage": "all" } ],
         "C_OUTCLK_SUM_ROW0B": [ { "value": "  Clock     Freq (MHz)  (degrees)    (%)     Jitter (ps)  Error (ps)", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW1": [ { "value": "clk_out1__130.00000______0.000______50.0______102.676_____87.159", "resolve_type": "generated", "usage": "all" } ],
-        "C_OUTCLK_SUM_ROW2": [ { "value": "clk_out2__65.00000______0.000______50.0______117.878_____87.159", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW1": [ { "value": "clk_out1__125.00000______0.000______50.0______162.582____137.238", "resolve_type": "generated", "usage": "all" } ],
+        "C_OUTCLK_SUM_ROW2": [ { "value": "clk_out2__64.90385______0.000______50.0______185.296____137.238", "resolve_type": "generated", "usage": "all" } ],
         "C_OUTCLK_SUM_ROW3": [ { "value": "no_CLK_OUT3_output", "resolve_type": "generated", "usage": "all" } ],
         "C_OUTCLK_SUM_ROW4": [ { "value": "no_CLK_OUT4_output", "resolve_type": "generated", "usage": "all" } ],
         "C_OUTCLK_SUM_ROW5": [ { "value": "no_CLK_OUT5_output", "resolve_type": "generated", "usage": "all" } ],
         "C_OUTCLK_SUM_ROW6": [ { "value": "no_CLK_OUT6_output", "resolve_type": "generated", "usage": "all" } ],
         "C_OUTCLK_SUM_ROW7": [ { "value": "no_CLK_OUT7_output", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT1_REQUESTED_OUT_FREQ": [ { "value": "130.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT1_REQUESTED_OUT_FREQ": [ { "value": "125", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT2_REQUESTED_OUT_FREQ": [ { "value": "65.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT3_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT4_REQUESTED_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
@@ -366,8 +366,8 @@
         "C_CLKOUT5_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT6_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT7_REQUESTED_DUTY_CYCLE": [ { "value": "50.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT1_OUT_FREQ": [ { "value": "130.00000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_CLKOUT2_OUT_FREQ": [ { "value": "65.00000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT1_OUT_FREQ": [ { "value": "125.00000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_CLKOUT2_OUT_FREQ": [ { "value": "64.90385", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT3_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT4_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_CLKOUT5_OUT_FREQ": [ { "value": "100.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
@@ -398,18 +398,18 @@
         "C_CLKOUT7_SEQUENCE_NUMBER": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_MMCM_NOTES": [ { "value": "None", "resolve_type": "generated", "usage": "all" } ],
         "C_MMCM_BANDWIDTH": [ { "value": "OPTIMIZED", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKFBOUT_MULT_F": [ { "value": "4.875", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKFBOUT_MULT_F": [ { "value": "16.875", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_MMCM_CLKIN1_PERIOD": [ { "value": "5.000", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_MMCM_CLKIN2_PERIOD": [ { "value": "10.0", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_MMCM_CLKOUT4_CASCADE": [ { "value": "FALSE", "resolve_type": "generated", "format": "bool", "usage": "all" } ],
         "C_MMCM_CLOCK_HOLD": [ { "value": "FALSE", "resolve_type": "generated", "format": "bool", "usage": "all" } ],
         "C_MMCM_COMPENSATION": [ { "value": "ZHOLD", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_DIVCLK_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_DIVCLK_DIVIDE": [ { "value": "4", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_MMCM_REF_JITTER1": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_MMCM_REF_JITTER2": [ { "value": "0.010", "resolve_type": "generated", "format": "float", "usage": "all" } ],
         "C_MMCM_STARTUP_WAIT": [ { "value": "FALSE", "resolve_type": "generated", "usage": "all" } ],
-        "C_MMCM_CLKOUT0_DIVIDE_F": [ { "value": "7.500", "resolve_type": "generated", "format": "float", "usage": "all" } ],
-        "C_MMCM_CLKOUT1_DIVIDE": [ { "value": "15", "resolve_type": "generated", "format": "long", "usage": "all" } ],
+        "C_MMCM_CLKOUT0_DIVIDE_F": [ { "value": "6.750", "resolve_type": "generated", "format": "float", "usage": "all" } ],
+        "C_MMCM_CLKOUT1_DIVIDE": [ { "value": "13", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_MMCM_CLKOUT2_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_MMCM_CLKOUT3_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
         "C_MMCM_CLKOUT4_DIVIDE": [ { "value": "1", "resolve_type": "generated", "format": "long", "usage": "all" } ],
@@ -540,12 +540,12 @@
         "C_FILTER_1": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
         "C_FILTER_2": [ { "value": "0000", "resolve_type": "generated", "usage": "all" } ],
         "C_DIVIDE1_AUTO": [ { "value": "1", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE2_AUTO": [ { "value": "2.0", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE3_AUTO": [ { "value": "0.13333333333333333", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE4_AUTO": [ { "value": "0.13333333333333333", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE5_AUTO": [ { "value": "0.13333333333333333", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE6_AUTO": [ { "value": "0.13333333333333333", "resolve_type": "generated", "usage": "all" } ],
-        "C_DIVIDE7_AUTO": [ { "value": "0.13333333333333333", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE2_AUTO": [ { "value": "1.9259259259259258", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE3_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE4_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE5_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE6_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
+        "C_DIVIDE7_AUTO": [ { "value": "0.14814814814814814", "resolve_type": "generated", "usage": "all" } ],
         "C_PLLBUFGCEDIV": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
         "C_MMCMBUFGCEDIV": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
         "C_PLLBUFGCEDIV1": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
@@ -566,8 +566,8 @@
         "C_CLKOUT5_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
         "C_CLKOUT6_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
         "C_CLKOUT7_MATCHED_ROUTING": [ { "value": "false", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT0_ACTUAL_FREQ": [ { "value": "130.00000", "resolve_type": "generated", "usage": "all" } ],
-        "C_CLKOUT1_ACTUAL_FREQ": [ { "value": "65.00000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT0_ACTUAL_FREQ": [ { "value": "125.00000", "resolve_type": "generated", "usage": "all" } ],
+        "C_CLKOUT1_ACTUAL_FREQ": [ { "value": "64.90385", "resolve_type": "generated", "usage": "all" } ],
         "C_CLKOUT2_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
         "C_CLKOUT3_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
         "C_CLKOUT4_ACTUAL_FREQ": [ { "value": "100.000", "resolve_type": "generated", "usage": "all" } ],
@@ -599,7 +599,7 @@
         "IPCONTEXT": [ { "value": "IP_Flow" } ],
         "IPREVISION": [ { "value": "16" } ],
         "MANAGED": [ { "value": "TRUE" } ],
-        "OUTPUTDIR": [ { "value": "../../../../eth_ctrl_debug_top.gen/sources_1/ip/clk_wiz_ctrl_inst" } ],
+        "OUTPUTDIR": [ { "value": "../../../../eth_generator_top.gen/sources_1/ip/clk_wiz_ctrl_inst" } ],
         "SELECTEDSIMMODEL": [ { "value": "" } ],
         "SHAREDDIR": [ { "value": "." } ],
         "SWVERSION": [ { "value": "2025.1" } ],

designs/reflectometer_prototype/prototype.sv

@@ -0,0 +1,174 @@
+`timescale 1 ns / 1 ns
+
+module prototype_top #(
+    parameter int unsigned DAC_DATA_WIDTH = 14,
+    parameter int unsigned ADC_DATA_WIDTH = 12,
+    parameter PACK_FACTOR = 1,
+    parameter PROCESS_MODE = 0,
+    parameter ZERO_LEVEL = 8192,
+    parameter ACCUM_WIDTH = 32,
+    parameter N_MAX = 4096,
+    parameter WINDOW_SIZE = 65,
+    parameter PACKET_SIZE = 1024
+)(
+    input                  sys_clk_p,                    // system clock positive
+    input                  sys_clk_n,                    // system clock negative 
+    input                   rst_n,                       // reset ,low active
+    output [3:0]            led,                         // display network rate status
+    output                  e_reset,                     // phy reset
+    output                  e_mdc,                       // phy emdio clock
+    inout                   e_mdio,                      // phy emdio data
+    input	                e_rxc,                       // 125Mhz ethernet gmii rx clock
+    input                   e_rxdv,                      // GMII recieving data valid
+    input                   e_rxer,                      // GMII recieving data error                    
+    input [7:0]             e_rxd,                       // GMII recieving data          
+
+    input                   e_txc,                       // 25Mhz ethernet mii tx clock         
+    output                  e_gtxc,                      // 125Mhz ethernet gmii tx clock  
+    output                  e_txen,                      // GMII sending data valid    
+    output                  e_txer,                      // GMII sending data error                   
+    output[7:0]             e_txd,                       // GMII sending data
+
+    // analog
+    output                      da2_clk,
+    output                      da2_wrt,
+    output [DAC_DATA_WIDTH-1:0] da2_data,
+
+    output                      ch2_clk,
+    input                       ch2_otr,
+    input [ADC_DATA_WIDTH-1:0]  ch2_data
+    );
+
+    wire                    sys_clk;                     //single end clock 
+    wire  [31:0]            pack_total_len ;             //package length
+    wire [1:0]              speed      ;                 //net speed select
+    wire                    link       ;                 //link status
+    wire                    erxdv    ;
+    wire [7:0]              erxd      ;
+    wire                    e_tx_en    ;
+    wire [7:0]              etxd      ;
+    wire                    e_rst_n    ;
+    assign e_gtxc = e_rxc;	 
+    assign e_reset = 1'b1; 
+
+    // generate single end clock
+
+    IBUFDS sys_clk_ibufgds
+    (
+    .O                      (sys_clk                 ),
+    .I                      (sys_clk_p               ),
+    .IB                     (sys_clk_n               )
+    );
+
+
+    // Different conversion of GMII data according to different network speeds
+    gmii_arbi arbi_inst
+    (
+    .clk                    (e_gtxc                 ),
+    .rst_n                  (rst_n                  ),
+    .speed                  (2'b10                  ),  
+    .link                   (1'b1                   ), 
+    .pack_total_len         (pack_total_len         ), 
+    .e_rst_n                (e_rst_n                ),
+    .gmii_rx_dv             (e_rxdv                 ),
+    .gmii_rxd               (e_rxd                  ),
+    .gmii_tx_en             (e_tx_en                ),
+    .gmii_txd               (etxd                   ), 
+    .e_rx_dv                (erxdv                  ),
+    .e_rxd                  (erxd                   ),
+    .e_tx_en                (e_txen                 ),
+    .e_txd                  (e_txd                  ) 
+    );
+
+    // ------------------------------------------------------------
+    // axis_mac interface
+    // ------------------------------------------------------------
+    wire         req_ready;
+
+    wire         send_req;
+
+    wire  [7:0]  s_axis_tx_tdata;
+    wire         s_axis_tx_tvalid;
+    wire         s_axis_tx_tready;
+    wire         s_axis_tx_tlast;
+
+    wire [7:0]   m_axis_rx_tdata;
+    wire         m_axis_rx_tvalid;
+    wire         m_axis_rx_tready;
+    wire         m_axis_rx_tlast;
+
+    // ------------------------------------------------------------
+    // axis_mac
+    // ------------------------------------------------------------
+    axis_mac axis_mac0
+    (
+        .gmii_tx_clk       (e_gtxc),
+        .gmii_rx_clk       (e_rxc),
+        .rst_n             (e_rst_n),
+
+        .gmii_rx_dv        (erxdv),
+        .gmii_rxd          (erxd),
+        .gmii_tx_en        (e_tx_en),
+        .gmii_txd          (etxd),
+
+        .send_req          (send_req),
+        .data_length       (PACKET_SIZE),
+        .req_ready         (req_ready),
+
+        .s_axis_tx_tdata   (s_axis_tx_tdata),
+        .s_axis_tx_tvalid  (s_axis_tx_tvalid),
+        .s_axis_tx_tready  (s_axis_tx_tready),
+        .s_axis_tx_tlast   (s_axis_tx_tlast),
+
+        .m_axis_rx_tdata   (m_axis_rx_tdata),
+        .m_axis_rx_tvalid  (m_axis_rx_tvalid),
+        .m_axis_rx_tready  (m_axis_rx_tready),
+        .m_axis_rx_tlast   (m_axis_rx_tlast)
+    );
+
+    // reflectometer base module
+    reflectometer_top #(
+        .PROCESS_MODE(PROCESS_MODE),
+        .PACK_FACTOR(PACK_FACTOR),
+        .ACCUM_WIDTH(ACCUM_WIDTH),
+        .N_MAX(N_MAX),
+        .ZERO_LEVEL(ZERO_LEVEL),
+        .WINDOW_SIZE(WINDOW_SIZE),
+        .PACKET_SIZE(PACKET_SIZE),
+        .ADC_DATA_WIDTH(ADC_DATA_WIDTH),
+        .DAC_DATA_WIDTH(DAC_DATA_WIDTH)
+    ) reflectometer_inst (
+    .sys_clk (sys_clk),
+    .rst_n (rst_n),
+
+    .led(led),
+
+    .gmii_tx_clk       (e_gtxc),
+    .gmii_rx_clk       (e_rxc),
+
+    .s_axis_tx_tdata   (s_axis_tx_tdata),
+    .s_axis_tx_tvalid  (s_axis_tx_tvalid),
+    .s_axis_tx_tready  (s_axis_tx_tready),
+    .s_axis_tx_tlast   (s_axis_tx_tlast),
+
+    .m_axis_rx_tdata   (m_axis_rx_tdata),
+    .m_axis_rx_tvalid  (m_axis_rx_tvalid),
+    .m_axis_rx_tready  (m_axis_rx_tready),
+    .m_axis_rx_tlast   (m_axis_rx_tlast),
+
+    // axis_mac
+    .req_ready(req_ready),
+    .send_req(send_req),
+
+    // DAC
+    .p2_clk(da2_clk),
+    .p2_data(da2_data),
+    .p2_wrt(da2_wrt),
+
+    // ADC
+    .ch2_clk(ch2_clk),
+    .ch2_data(ch2_data),
+    .ch2_otr(ch2_otr)
+    );
+
+endmodule

docs/sampler.md

@@ -1 +0,0 @@
-# Блок Sampler

rtl/accum/src/accum.sv

@@ -5,7 +5,6 @@ module accumulator
     parameter DATA_WIDTH = 12,
     parameter ACCUM_WIDTH = 32,
     parameter N_MAX = 4096,
-    parameter WINDOW_SIZE = 4,
     parameter PACKET_SIZE = 8,
     parameter READ_BATCH_SIZE =(PACKET_SIZE*8)/(ACCUM_WIDTH)
     )
@@ -17,6 +16,7 @@ module accumulator
     input start,
     input [31:0] smp_num,
     input [15:0] seq_num,
+    input [31:0] window_size,
 
     output [ACCUM_WIDTH-1:0] out_data,
     output out_valid,
@@ -26,6 +26,7 @@ module accumulator
     );
 
     logic [31:0] smp_num_reg, cnt_smp_num;
+    logic [31:0] window_size_reg;
     logic [15:0] seq_num_reg, cnt_seq_num;
     logic [15:0] cnt_addr, addra, addrb;
 
@@ -39,10 +40,6 @@ module accumulator
     logic out_valid_reg;
     logic finish_reg, finish_buf;
 
-    // registers for port b data request
-    reg req_data_b;
-    reg [15:0] req_addr_b;
-
     typedef enum logic [3:0] {
         IDLE,
         INIT_MEM,
@@ -58,18 +55,85 @@ module accumulator
     } wr_state_t;
     (* MARK_DEBUG="true" *) wr_state_t wr_state;
 
+    // One word per clock accumulation pipeline
+    // On every sum_valid in ACCUM we launch a BRAM read for cnt_addr
+    // On the next clock the saved sum_data is added to doutb and written back
+    logic accum_pipe_valid;
+    logic [15:0] accum_pipe_addr;
+    logic [ACCUM_WIDTH-1:0] accum_pipe_data;
+
+    // case smp_num // window_size == 1
+    // Then the next sequence can read the same address it is written
+    logic accum_pipe_bypass_valid;
+    logic [ACCUM_WIDTH-1:0] accum_pipe_bypass_data;
+    logic accum_done;
+
+    logic accum_accept_last;
+    logic accum_accept_last_all;
+    logic [ACCUM_WIDTH-1:0] accum_write_base;
+    logic [ACCUM_WIDTH-1:0] accum_write_value;
+
+    wire [31:0] window_size_safe = (window_size == 32'd0) ? 32'd1 : window_size;
+    wire start_accept = start && (wr_state == IDLE);
+
+    assign accum_accept_last     = (cnt_smp_num + window_size_reg >= smp_num_reg);
+    assign accum_accept_last_all = accum_accept_last && (cnt_seq_num == seq_num_reg - 1);
+    assign accum_write_base      = accum_pipe_bypass_valid ? accum_pipe_bypass_data : data_bram_out;
+    assign accum_write_value     = accum_pipe_data + accum_write_base;
+
+    // Memory controls to XPM
+    // In accumulation/init states they are driven directly from the current
+    // state and pipeline registers. That avoids an extra register stage
+    logic mem_wea;
+    logic mem_enb;
+    logic [15:0] mem_addra;
+    logic [15:0] mem_addrb;
+    logic [ACCUM_WIDTH-1:0] mem_dina;
+
+    assign mem_wea = (wr_state == INIT_MEM) ? valid_data :
+                     (wr_state == ACCUM)    ? accum_pipe_valid :
+                                              1'b0;
+
+    assign mem_addra = (wr_state == INIT_MEM) ? cnt_addr :
+                       (wr_state == ACCUM)    ? accum_pipe_addr :
+                                                addra;
+
+    assign mem_dina = (wr_state == INIT_MEM) ? data :
+                      (wr_state == ACCUM)    ? accum_write_value :
+                                               data_bram_in;
+
+    assign mem_enb = (wr_state == ACCUM) ? valid_data : enb;
+    assign mem_addrb = (wr_state == ACCUM) ? cnt_addr : addrb;
+
+    // registers for port b data request
+    reg req_data_b;
+    reg [15:0] req_addr_b;
+
     always @(posedge clk_in) begin
         if (rst) begin
             smp_num_reg <= '0;
             cnt_smp_num <= '0;
+            window_size_reg <= 32'd1;
             seq_num_reg <= '0;
             cnt_seq_num <= '0;
             cnt_addr <= '0;
+            addra <= '0;
+            addrb <= '0;
+            data_bram_in <= '0;
             wea <= 0;
             enb <= 0;
             wr_state <= IDLE;
             finish_reg <= 0;
+            finish_buf <= 0;
+            readout_begin_reg <= 0;
+            out_data_reg <= '0;
             out_valid_reg <= 0;
+            accum_pipe_valid <= 0;
+            accum_pipe_addr <= '0;
+            accum_pipe_data <= '0;
+            accum_pipe_bypass_valid <= 0;
+            accum_pipe_bypass_data <= '0;
+            accum_done <= 0;
         end else begin
             finish_buf <= finish;
 
@@ -83,83 +147,137 @@ module accumulator
                 readout_begin_reg <= 0;
                 finish_reg <= 0;
                 out_valid_reg <= 0;
+                accum_pipe_valid <= 0;
+                accum_pipe_bypass_valid <= 0;
+                accum_done <= 0;
+                cnt_smp_num <= '0;
+                cnt_seq_num <= '0;
+                cnt_addr <= '0;
+                addrb <= '0;
                 if (start) begin
                     smp_num_reg <= smp_num;
                     seq_num_reg <= seq_num;
+                    window_size_reg <= window_size_safe;
                     wr_state <= INIT_MEM;
                 end
 
             end
+
             INIT_MEM: begin
-                // first run to initialize memory with first batch of values
+                // First sequence 
                 wea <= 0;
+                enb <= 0;
+                out_valid_reg <= 0;
+                accum_pipe_valid <= 0;
+                accum_pipe_bypass_valid <= 0;
+                accum_done <= 0;
+
                 if (valid_data) begin
+                    // mem_wea/mem_addra/mem_dina do the actual write in this clock
                     data_bram_in <= data;
                     addra <= cnt_addr;
                     wea <= 1;
-                    cnt_addr <= cnt_addr + 1;
-                    cnt_smp_num <= cnt_smp_num + WINDOW_SIZE;
 
-                end
-                if (cnt_smp_num >= smp_num_reg) begin
-                    wr_state <= BEGIN_SEQ;
+                    if (cnt_smp_num + window_size_reg >= smp_num_reg) begin
+                        cnt_smp_num <= '0;
+                        cnt_addr <= '0;
+
+                        if (seq_num_reg <= 16'd1) begin
+                            cnt_seq_num <= '0;
+                            addrb <= '0;
+                            wr_state <= READOUT_START;
+                        end else begin
+                            // start further accumulation
+                            cnt_seq_num <= 16'd1;
+                            wr_state <= ACCUM;
+                        end
+                    end else begin
+                        cnt_smp_num <= cnt_smp_num + window_size_reg;
+                        cnt_addr <= cnt_addr + 1;
+                    end
                 end
 
             end
+
             BEGIN_SEQ: begin
-                // start new acc seq
+                // FIXME: unused
                 wea <= 0;
                 enb <= 0;
-                if (cnt_seq_num == seq_num_reg - 1) begin
-                    cnt_seq_num <= '0;
-                    cnt_smp_num <= '0;
-                    cnt_addr <= '0;
-                    wr_state <= READOUT_START;
-                    addrb <= '0;
-                    enb <= 0;
-                end else begin
-                    // beginning of new data sequence
-                    cnt_seq_num <= cnt_seq_num + 1;
-                    cnt_smp_num <= '0;
-                    cnt_addr <= '0;
-                    wea <= 0;
-                    addrb <= 0;
-                    wr_state <= REQ_WORD_B;
-                end
+                wr_state <= ACCUM;
             end
 
             REQ_WORD_B: begin
-                // pre-request data for port b
+                // FIXME: depr
                 wea <= 0;
-                enb <= 1;
-                addrb <= cnt_addr;
+                enb <= 0;
                 wr_state <= ACCUM;
             end
 
             ACCUM: begin
-                // sum mem+input
+                // accum pipeline
+                wea <= 0;
                 enb <= 0;
-                if (valid_data) begin
-                    addra <= cnt_addr;
+                out_valid_reg <= 0;
+
+                if (accum_pipe_valid) begin
+                    // mem_wea/mem_addra/mem_dina do the actual write this clock
+                    addra <= accum_pipe_addr;
+                    data_bram_in <= accum_write_value;
                     wea <= 1;
-                    data_bram_in <= data + data_bram_out;
-                    cnt_smp_num <= cnt_smp_num + WINDOW_SIZE;
-                    if (cnt_smp_num + WINDOW_SIZE >= smp_num_reg) begin
-                        wr_state <= BEGIN_SEQ;
+                end
+
+                if (accum_done) begin
+                    // Last input word was accepted on the previous clk
+                    accum_pipe_valid <= 0;
+                    accum_pipe_bypass_valid <= 0;
+                    cnt_smp_num <= '0;
+                    cnt_seq_num <= '0;
+                    cnt_addr <= '0;
+                    addrb <= '0;
+                    enb <= 0;
+                    wr_state <= READOUT_START;
+                end else if (valid_data) begin
+                    // mem_enb/mem_addrb launch the actual read this clock
+                    enb <= 1;
+                    addrb <= cnt_addr;
+
+                    accum_pipe_valid <= 1;
+                    accum_pipe_addr <= cnt_addr;
+                    accum_pipe_data <= data;
+
+                    // case window_size=1 && smp_num is small
+                    accum_pipe_bypass_valid <= accum_pipe_valid && (accum_pipe_addr == cnt_addr);
+                    accum_pipe_bypass_data <= accum_write_value;
+
+                    if (accum_accept_last) begin
+                        cnt_smp_num <= '0;
+                        cnt_addr <= '0;
+
+                        if (cnt_seq_num == seq_num_reg - 1) begin
+                            accum_done <= 1;
+                        end else begin
+                            cnt_seq_num <= cnt_seq_num + 1;
+                        end
                     end else begin
+                        cnt_smp_num <= cnt_smp_num + window_size_reg;
                         cnt_addr <= cnt_addr + 1;
-                        wr_state <= REQ_WORD_B;
                     end
+                end else begin
+                    accum_pipe_valid <= 0;
+                    accum_pipe_bypass_valid <= 0;
                 end
             end
+
             READOUT_START: begin
                 readout_begin_reg <= 1'b1;
                 wr_state <= READOUT_AWAIT;
                 enb <= 0;
+                wea <= 0;
             end
 
             READOUT_AWAIT: begin
-                // req await + delay for every-clock readout.
+                // req await + delay for every-clock readout
+                wea <= 0;
                 if (batch_req) begin
                     enb <= 1;
                     wr_state <= READOUT_DELAY;
@@ -173,12 +291,14 @@ module accumulator
 
             READOUT_DELAY: begin
                 // wait for mem latency
+                wea <= 0;
                 addrb <= addrb + 1;
                 wr_state <= READOUT_PUT;
             end
 
             READOUT_PUT: begin
                 // main data output
+                wea <= 0;
                 if ((addrb % READ_BATCH_SIZE) == 0) begin
                     wr_state <= READOUT_LAST;
                     enb <= 0;
@@ -190,6 +310,7 @@ module accumulator
 
             READOUT_LAST: begin
                 // last word of packet
+                wea <= 0;
                 out_valid_reg <= 0;
                 out_data_reg <= data_bram_out;
                 wr_state <= READOUT_START;
@@ -198,6 +319,7 @@ module accumulator
             FINISH: begin
                 out_valid_reg <= 0;
                 enb <= 0;
+                wea <= 0;
                 wr_state <= IDLE;
             end
 
@@ -210,12 +332,13 @@ module accumulator
     adder
     #(
         .DATA_WIDTH(DATA_WIDTH),
-        .WINDOW_SIZE(WINDOW_SIZE),
         .ACCUM_WIDTH(ACCUM_WIDTH)
     ) adder_dut
     (
         .clk_in(clk_in),
         .rst(rst),
+        .start(start_accept),
+        .window_size(window_size),
         .s_axis_tdata(s_axis_tdata),
         .s_axis_tvalid(s_axis_tvalid),
         .sum_data(data),
@@ -254,14 +377,14 @@ module accumulator
 
       .doutb(data_bram_out),
 
-      .addra(addra),
-      .addrb(addrb),
+      .addra(mem_addra),
+      .addrb(mem_addrb),
       .clka(clk_in),
       .clkb(clk_in),
-      .dina(data_bram_in),
+      .dina(mem_dina),
       .ena(1'b1),
-      .enb(enb),
-      .wea(wea)
+      .enb(mem_enb),
+      .wea(mem_wea)
    );
 
     assign readout_begin = readout_begin_reg;

rtl/accum/src/accum_top.sv

@@ -5,7 +5,6 @@ module accumulator_top
     parameter DATA_WIDTH = 12,
     parameter ACCUM_WIDTH = 32,
     parameter N_MAX = 4096,
-    parameter WINDOW_SIZE = 65,
     parameter PACKET_SIZE = 1024,
     parameter READ_BATCH_SIZE =(PACKET_SIZE*8)/(ACCUM_WIDTH)
     )
@@ -22,6 +21,7 @@ module accumulator_top
     input start,
     input [31:0] smp_num,
     input [15:0] seq_num,
+    input [31:0] window_size,
 
     // eth signals
     input eth_clk_in,
@@ -42,36 +42,67 @@ module accumulator_top
     wire readout_begin;
     wire batch_req;
 
+    logic finish_int;
+    logic finish_int_d;
+    logic finish_pulse;
+    logic calc_active;
+    logic start_accept;
+    logic [31:0] window_size_reg;
+
+    wire [31:0] window_size_safe = (window_size == 32'd0) ? 32'd1 : window_size;
+
+    assign finish_pulse = finish_int && !finish_int_d;
+    assign start_accept = start && !calc_active;
+    assign finish = finish_int;
+
+    // Keep the top copy stable for blocks that start later than the accum itself
+    always_ff @(posedge clk_in) begin
+        if (rst) begin
+            calc_active     <= 1'b0;
+            finish_int_d    <= 1'b0;
+            window_size_reg <= 32'd1;
+        end else begin
+            finish_int_d <= finish_int;
+
+            if (start_accept) begin
+                calc_active     <= 1'b1;
+                window_size_reg <= window_size_safe;
+            end else if (finish_pulse) begin
+                calc_active <= 1'b0;
+            end
+        end
+    end
+
     accumulator #(
         .DATA_WIDTH(DATA_WIDTH),
         .ACCUM_WIDTH(ACCUM_WIDTH),
         .N_MAX(N_MAX),
-        .WINDOW_SIZE(WINDOW_SIZE),
         .PACKET_SIZE(PACKET_SIZE)
     ) accum_main (
         .clk_in(clk_in),
         .rst(rst),
         .s_axis_tdata(s_axis_tdata),
         .s_axis_tvalid(s_axis_tvalid),
-        .start(start),
+        .start(start_accept),
         .smp_num(smp_num),
         .seq_num(seq_num),
+        .window_size(window_size),
         .out_data(out_data),
         .out_valid(out_valid),
         .readout_begin(readout_begin),
         .batch_req(batch_req),
-        .finish(finish)
+        .finish(finish_int)
     );
 
     out_axis_fifo #(
         .ACCUM_WIDTH(ACCUM_WIDTH),
-        .WINDOW_SIZE(WINDOW_SIZE),
         .PACKET_SIZE(PACKET_SIZE)
     ) output_async_fifo (
         .eth_clk_in    (eth_clk_in),
         .acc_clk_in    (clk_in),
         .rst           (rst),
         .smp_num       (smp_num),
+        .window_size   (window_size_reg),
 
         .m_axis_tdata  (m_axis_tdata),
         .m_axis_tvalid (m_axis_tvalid),
@@ -87,6 +118,6 @@ module accumulator_top
         .send_req      (send_req),
 
         .batch_req     (batch_req),
-        .finish        (finish)
+        .finish        (finish_int)
     );
-endmodule
+endmodule

rtl/accum/src/adder.sv

@@ -4,12 +4,13 @@
 module adder
 #(
     parameter DATA_WIDTH = 12,
-    parameter WINDOW_SIZE = 4,
     parameter ACCUM_WIDTH = 32
     )
 (
     input clk_in,
     input rst,
+    input start,
+    input [31:0] window_size,
     input [DATA_WIDTH-1:0] s_axis_tdata,
     input s_axis_tvalid,
     
@@ -20,7 +21,10 @@ module adder
     logic [ACCUM_WIDTH-1:0] accum, res;
     logic [DATA_WIDTH-1:0] axis_data;
     logic res_valid, axis_valid;
- (* MARK_DEBUG = "TRUE" *)   logic [15:0] cnt;
+    (* MARK_DEBUG = "TRUE" *) logic [31:0] cnt;
+    logic [31:0] window_size_reg;
+
+    wire [31:0] window_size_safe = (window_size == 32'd0) ? 32'd1 : window_size;
     
     always @(posedge clk_in) begin
         if (rst) begin
@@ -28,19 +32,32 @@ module adder
             cnt <= '0;
             res <= '0;
             res_valid <= 0;
+            axis_data <= '0;
+            axis_valid <= 0;
+            window_size_reg <= 32'd1;
         end else begin
             res_valid <= 0;
-            axis_data <= s_axis_tdata;
-            axis_valid <= s_axis_tvalid;
-            if ( axis_valid) begin
-                if (cnt == WINDOW_SIZE-1) begin
-                    res <= accum + axis_data;
-                    res_valid <= 1;
-                    accum <= '0;
-                    cnt <= '0;
-                end else begin
-                    accum <= accum + axis_data;
-                    cnt   <= cnt + 1;
+
+            if (start) begin
+                accum <= '0;
+                cnt <= '0;
+                res <= '0;
+                axis_data <= '0;
+                axis_valid <= 0;
+                window_size_reg <= window_size_safe;
+            end else begin
+                axis_data <= s_axis_tdata;
+                axis_valid <= s_axis_tvalid;
+                if (axis_valid) begin
+                    if (cnt == window_size_reg - 1) begin
+                        res <= accum + axis_data;
+                        res_valid <= 1;
+                        accum <= '0;
+                        cnt <= '0;
+                    end else begin
+                        accum <= accum + axis_data;
+                        cnt   <= cnt + 1;
+                    end
                 end
             end
         end

rtl/accum/src/out_axis_fifo.sv

@@ -1,12 +1,12 @@
 module out_axis_fifo #(
     parameter ACCUM_WIDTH = 32,
-    parameter WINDOW_SIZE = 65,
     parameter PACKET_SIZE = 1024
 ) (
     input  logic                eth_clk_in,
     input  logic                acc_clk_in,
     input  logic                rst,
     input  logic [31:0]         smp_num,
+    input  logic [31:0]         window_size,
 
     // AXI stream master for output, eth_clk_in domain
     output logic [7:0]          m_axis_tdata,
@@ -85,6 +85,8 @@ module out_axis_fifo #(
     reg [31:0] wr_cnt;       // current BIT mem ptr
     reg [31:0] wr_batch_tgt; // next 'target' that should be written from batch
     reg [31:0] wr_total;     // total BITS to be sent!
+    logic [31:0] window_size_reg;
+    wire [31:0] window_size_safe = (window_size == 32'd0) ? 32'd1 : window_size;
 
     wire empty;
 
@@ -92,7 +94,7 @@ module out_axis_fifo #(
 
     // NOTE:
     // each written "acc_din" ACCUM_WIDTH word
-    // is counted as WINDOWS_SIZE samples actually
+    // is counted as window_size samples actually
     // because hw division for counters is painful
     // so we just increased the counter sizes
 
@@ -102,6 +104,7 @@ module out_axis_fifo #(
             wr_cnt          <= 32'b0;
             wr_batch_tgt    <= 32'b0;
             wr_total        <= 32'b0;
+            window_size_reg <= 32'd1;
             batch_req       <= 0;
             finish          <= 0;
             
@@ -115,6 +118,7 @@ module out_axis_fifo #(
                         wr_state <= WR_CHECK;
                         wr_total <= smp_num * ACCUM_WIDTH;
                         wr_batch_tgt <= 32'b0;
+                        window_size_reg <= window_size_safe;
                         batch_req <= 0;
                         finish <= 0;
                     end
@@ -126,9 +130,9 @@ module out_axis_fifo #(
                     if ((wr_data_count < (FIFO_WDEPTH - (PACKET_SIZE / (ACCUM_WIDTH / 8)))) && ~wr_rst_busy) begin
                         batch_req <= 1;
                         // should give us exactly PACKET_SIZE * 8 bits
-                        // multiplied by WINDOW_SIZE, because we count 
-                        // each given ACCUM_WIDTH word as WINDOWS_SIZE samples !!!
-                        wr_batch_tgt <= wr_batch_tgt + (8 * WINDOW_SIZE * PACKET_SIZE);
+                        // multiplied by window_size, because we count 
+                        // each given ACCUM_WIDTH word as window_size samples !!!
+                        wr_batch_tgt <= wr_batch_tgt + (8 * window_size_reg * PACKET_SIZE);
                         wr_state <= WR_RUN;
                     end else begin
                         batch_req <= 0;
@@ -150,8 +154,8 @@ module out_axis_fifo #(
 
                     if (din_valid) begin
                         // data supplied
-                        // count as we got WINDOW_SIZE samples
-                        wr_cnt <= wr_cnt + ACCUM_WIDTH * WINDOW_SIZE;
+                        // count as we got window_size samples
+                        wr_cnt <= wr_cnt + ACCUM_WIDTH * window_size_reg;
                     end
                 end
 

rtl/accum/tests/Makefile

@@ -13,20 +13,24 @@ FPGA_ARCH = artix7
 
 RTL_DIR = ../src
 
+# Simulation settings
+SIM_TOP     = tb_accumulator_top
+SIM_RUNTIME ?= 10000 us
 
-include ../../../scripts/vivado.mk
+# Design sources only
+SYN_FILES += $(filter-out %_tb.sv,$(sort $(shell find $(RTL_DIR) -type f -name '*.v' -o -type f -name '*.sv')))
 
-SYN_FILES += $(sort $(shell find ../src -type f \( -name '*.v' -o -name '*.sv' \)))
+# Testbench sources. Vivado puts these into "sim_1", Questa compiles them into "work".
+TB_FILES += out_axis_fifo_tb.sv
+TB_FILES += accum_full_tb.sv
 
-XCI_FILES = $(sort $(shell find ../src -type f -name '*.xci'))
+XCI_FILES = $(sort $(shell find $(RTL_DIR) -type f -name '*.xci'))
 
 XDC_FILES += ../../../constraints/ax7a035b.xdc
 XDC_FILES += test_timing.xdc
 
-SYN_FILES += out_axis_fifo_tb.sv
-SYN_FILES += accum_full_tb.sv
-SIM_TOP = tb_accumulator_top
-
+include ../../../scripts/vivado.mk
+include ../../../scripts/questa.mk
 
 program: $(PROJECT).bit
 	echo "open_hw_manager" > program.tcl

rtl/accum/tests/accum_full_tb.sv

@@ -5,11 +5,11 @@ module tb_accumulator_top;
     localparam DATA_WIDTH      = 12;
     localparam ACCUM_WIDTH     = 32;
     localparam N_MAX           = 4096;
-    localparam WINDOW_SIZE     = 65;
+    localparam MAX_WINDOW_SIZE = 65;
     localparam PACKET_SIZE     = 1024;
     localparam READ_BATCH_SIZE = (PACKET_SIZE*8)/ACCUM_WIDTH;
     localparam MAX_WORDS       = N_MAX;
-    localparam MAX_SEQ_NUM     = 64;
+    localparam MAX_SEQ_NUM     = 256;
 
     logic clk_in;
     logic eth_clk_in;
@@ -20,6 +20,7 @@ module tb_accumulator_top;
     logic                  start;
     logic [31:0]           smp_num;
     logic [15:0]           seq_num;
+    logic [31:0]           window_size;
 
     logic                  req_ready;
     wire                   send_req;
@@ -50,7 +51,6 @@ module tb_accumulator_top;
         .DATA_WIDTH(DATA_WIDTH),
         .ACCUM_WIDTH(ACCUM_WIDTH),
         .N_MAX(N_MAX),
-        .WINDOW_SIZE(WINDOW_SIZE),
         .PACKET_SIZE(PACKET_SIZE)
     ) dut (
         .clk_in(clk_in),
@@ -60,6 +60,7 @@ module tb_accumulator_top;
         .start(start),
         .smp_num(smp_num),
         .seq_num(seq_num),
+        .window_size(window_size),
         .eth_clk_in(eth_clk_in),
         .req_ready(req_ready),
         .send_req(send_req),
@@ -104,6 +105,7 @@ module tb_accumulator_top;
         s_axis_tvalid = 1'b0;
         smp_num       = '0;
         seq_num       = '0;
+        window_size   = 32'd1;
         req_ready     = 1'b0;
         m_axis_tready = 1'b1;
         clear_scoreboard();
@@ -141,13 +143,14 @@ module tb_accumulator_top;
 
     task automatic run_test(
         input integer test_id,
+        input integer window_size_i,
         input integer seq_num_i,
         input integer smp_num_i,
         input bit     randomize_data,
         input integer base_value,
         input string  test_name
     );
-        logic [DATA_WIDTH-1:0] sample_mem [0:MAX_SEQ_NUM-1][0:(N_MAX*WINDOW_SIZE)-1];
+        logic [DATA_WIDTH-1:0] sample_mem [0:MAX_SEQ_NUM-1][0:(N_MAX*MAX_WINDOW_SIZE)-1];
         integer seq_idx;
         integer sample_idx;
         integer word_idx;
@@ -165,22 +168,25 @@ module tb_accumulator_top;
         tests_total   = tests_total + 1;
         errors_before = total_errors;
 
-        if (smp_num_i <= 0 || smp_num_i > N_MAX * WINDOW_SIZE || (smp_num_i % WINDOW_SIZE) != 0)
-            $fatal(1, "[%0s] invalid smp_num=%0d", test_name, smp_num_i);
+        if (window_size_i <= 0 || window_size_i > MAX_WINDOW_SIZE)
+            $fatal(1, "[%0s] invalid window_size=%0d", test_name, window_size_i);
+        if (smp_num_i <= 0 || smp_num_i > N_MAX * window_size_i || (smp_num_i % window_size_i) != 0)
+            $fatal(1, "[%0s] invalid smp_num=%0d for window_size=%0d", test_name, smp_num_i, window_size_i);
         if (seq_num_i <= 0 || seq_num_i > MAX_SEQ_NUM)
             $fatal(1, "[%0s] invalid seq_num=%0d", test_name, seq_num_i);
 
         $display("\n========================================");
         $display("TEST %0d: %0s", test_id, test_name);
-        $display("seq_num=%0d smp_num=%0d randomize=%0d", seq_num_i, smp_num_i, randomize_data);
+        $display("window_size=%0d seq_num=%0d smp_num=%0d randomize=%0d", window_size_i, seq_num_i, smp_num_i, randomize_data);
         $display("========================================");
 
         reset_dut();
-        smp_num   = smp_num_i;
-        seq_num   = seq_num_i;
-        req_ready = 1'b1; // приемник готов заранее
+        smp_num     = smp_num_i;
+        seq_num     = seq_num_i;
+        window_size = window_size_i;
+        req_ready   = 1'b1; // приемник готов заранее
 
-        exp_word_count   = smp_num_i / WINDOW_SIZE;
+        exp_word_count   = smp_num_i / window_size_i;
         exp_packet_count = (exp_word_count + READ_BATCH_SIZE - 1) / READ_BATCH_SIZE;
 
         for (seq_idx = 0; seq_idx < seq_num_i; seq_idx = seq_idx + 1) begin
@@ -196,8 +202,8 @@ module tb_accumulator_top;
         for (word_idx = 0; word_idx < exp_word_count; word_idx = word_idx + 1) begin
             local_sum = 0;
             for (seq_idx = 0; seq_idx < seq_num_i; seq_idx = seq_idx + 1) begin
-                for (k = 0; k < WINDOW_SIZE; k = k + 1)
-                    local_sum = local_sum + sample_mem[seq_idx][word_idx * WINDOW_SIZE + k];
+                for (k = 0; k < window_size_i; k = k + 1)
+                    local_sum = local_sum + sample_mem[seq_idx][word_idx * window_size_i + k];
             end
             expected_words[word_idx] = local_sum[ACCUM_WIDTH-1:0];
             $display("  expected[%0d] = %0d (0x%08x)", word_idx, expected_words[word_idx], expected_words[word_idx]);
@@ -318,13 +324,17 @@ module tb_accumulator_top;
 
         reset_dut();
 
-        run_test(1, 1,  1 * WINDOW_SIZE, 1'b0, 1,  "deterministic_small");
-//        $finish;
-        run_test(2, 2,  1 * WINDOW_SIZE, 1'b1, 0,  "random_seq3_smp8");
-        run_test(3, 1, 16 * WINDOW_SIZE, 1'b1, 0,  "random_seq5_smp16_multi_packet");
-        run_test(4, 2, 12 * WINDOW_SIZE, 1'b1, 0,  "random_seq7_smp12");
-        run_test(5, 4, 256 * WINDOW_SIZE, 1'b1, 0,  "random_max_smpnum");
-        run_test(6, 2, 1500 * WINDOW_SIZE, 1'b1, 0,  "random_max_smpnum2");
+        run_test(1,  1, 1,    1 * 1,  1'b0, 1,  "w1_deterministic_small");
+        run_test(2,  1, 2,   16 * 1,  1'b1, 0,  "w1_random_seq2_smp16");
+        run_test(3,  2, 2,   16 * 2,  1'b1, 0,  "w2_random_seq2_smp32");
+        run_test(4,  3, 1,   16 * 3,  1'b1, 0,  "w3_random_seq1_smp48");
+        run_test(5,  4, 2,   12 * 4,  1'b1, 0,  "w4_random_seq2_smp48");
+        run_test(6, 65, 4,  256 * 65, 1'b1, 0,  "w65_random_seq4_smp16640");
+        run_test(7,  2, 20,   3 * 2,  1'b1, 0,  "w2_random_20seqx3");
+        run_test(8, 65, 20,   3 * 65, 1'b1, 0,  "w65_random_20seqx3");
+        run_test(9,  1, 200,  1 * 1,  1'b1, 0,  "w1_random_200seq");
+        run_test(10,  2, 200,  2 * 1,  1'b1, 0,  "w2_random_200seq");
+        run_test(11,  65, 200,  65 * 1,  1'b1, 0,  "w1_random_200seq");
 
         $display("\n========================================");
         $display("ALL TESTS COMPLETED");

rtl/accum/tests/tb_accumulator_top_behav.wcfg

@@ -11,13 +11,13 @@
       </db_ref>
    </db_ref_list>
    <zoom_setting>
-      <ZoomStartTime time="0.000000 us"></ZoomStartTime>
-      <ZoomEndTime time="16.740001 us"></ZoomEndTime>
-      <Cursor1Time time="6.500000 us"></Cursor1Time>
+      <ZoomStartTime time="2,748,541.000 ns"></ZoomStartTime>
+      <ZoomEndTime time="2,749,382.001 ns"></ZoomEndTime>
+      <Cursor1Time time="2,749,045.000 ns"></Cursor1Time>
    </zoom_setting>
    <column_width_setting>
       <NameColumnWidth column_width="556"></NameColumnWidth>
-      <ValueColumnWidth column_width="111"></ValueColumnWidth>
+      <ValueColumnWidth column_width="107"></ValueColumnWidth>
    </column_width_setting>
    <WVObjectSize size="18" />
    <wvobject type="logic" fp_name="/tb_accumulator_top/clk_in">
@@ -116,6 +116,10 @@
          <obj_property name="ElementShortName">addrb[15:0]</obj_property>
          <obj_property name="ObjectShortName">addrb[15:0]</obj_property>
       </wvobject>
+      <wvobject type="array" fp_name="/tb_accumulator_top/dut/accum_main/wr_state">
+         <obj_property name="ElementShortName">wr_state[3:0]</obj_property>
+         <obj_property name="ObjectShortName">wr_state[3:0]</obj_property>
+      </wvobject>
    </wvobject>
    <wvobject type="group" fp_name="group27">
       <obj_property name="label">fifo</obj_property>
@@ -166,13 +170,13 @@
          <obj_property name="ObjectShortName">PROG_FULL_THRESH[31:0]</obj_property>
       </wvobject>
       <wvobject type="array" fp_name="/tb_accumulator_top/dut/output_async_fifo/xpm_fifo_async_inst/wr_data_count">
-         <obj_property name="ElementShortName">wr_data_count[4:0]</obj_property>
-         <obj_property name="ObjectShortName">wr_data_count[4:0]</obj_property>
+         <obj_property name="ElementShortName">wr_data_count[9:0]</obj_property>
+         <obj_property name="ObjectShortName">wr_data_count[9:0]</obj_property>
          <obj_property name="Radix">UNSIGNEDDECRADIX</obj_property>
       </wvobject>
       <wvobject type="array" fp_name="/tb_accumulator_top/dut/output_async_fifo/xpm_fifo_async_inst/rd_data_count">
-         <obj_property name="ElementShortName">rd_data_count[6:0]</obj_property>
-         <obj_property name="ObjectShortName">rd_data_count[6:0]</obj_property>
+         <obj_property name="ElementShortName">rd_data_count[11:0]</obj_property>
+         <obj_property name="ObjectShortName">rd_data_count[11:0]</obj_property>
          <obj_property name="Radix">UNSIGNEDDECRADIX</obj_property>
       </wvobject>
    </wvobject>

rtl/controller/README.md

@@ -41,14 +41,15 @@
 
 *start* отправляет пульс start на dac_start и adc_start в их доменах. при этом после этого блок перестает быть ready и ждет, пока не придет пульс finish, после этого он возвращается снова в *idle* состояние
 
-*set_data* значит, что следующие 96 бит = 12*8 байт, пришедшии по axis - это конфигурационная информация и ее нужно записать в внутренний регистр на 96 бит.
+*set_data* значит, что следующие 128 бит = 16*8 байт, пришедшии по axis - это конфигурационная информация и ее нужно записать в внутренний регистр на 128 бит.
 
-конфигурационный регистр на 96 бит делится так:
+конфигурационный регистр на 128 бит делится так:
 ```
 reg[31:0] - pulse_width
 reg[63:32] - pulse_period
 reg[79:64] - pulse_num
 reg[79+dac_data_width:80] - pulse_height
+reg[127:96] - pulse_period_adc
 ```
 
 соотвественно эти записанные значения выставляются на соотвествующие выходные сигналы в доменах dac_clk и adc_clk. выходы обновляются каждый раз, когда происходит set_data, и сигналы сохраняют своё значение до следующего set_data.

rtl/controller/src/controller.sv

@@ -109,9 +109,11 @@ module control #(
     // [63:32]  pulse_period
     // [79:64]  pulse_num
     // [95:80]  pulse_height_raw[15:0]
+    // [127:96] pulse_period_ADC
+    //
     // -------------------------------------------------------------------------
-    (* MARK_DEBUG="true" *) logic [95:0] cfg_bus_eth;
-    logic [95:0] cfg_shift_eth;
+    (* MARK_DEBUG="true" *) logic [127:0] cfg_bus_eth;
+    logic [127:0] cfg_shift_eth;
 
     // ETH-domain parser and control
     typedef enum logic [2:0] {
@@ -278,10 +280,10 @@ module control #(
                         // little endian packing
                         cfg_shift_eth[cfg_byte_cnt*8 +: 8] <= s_axis_tdata;
 
-                        if (cfg_byte_cnt == 4'd11) begin
+                        if (cfg_byte_cnt == 4'd15) begin
                             // this must be the final payload byte
                             if (s_axis_tlast) begin
-                                cfg_bus_eth            <= {s_axis_tdata, cfg_shift_eth[87:0]};
+                                cfg_bus_eth            <= {s_axis_tdata, cfg_shift_eth[119:0]};
                                 cfg_req_toggle_dac_eth <= ~cfg_req_toggle_dac_eth;
                                 cfg_req_toggle_adc_eth <= ~cfg_req_toggle_adc_eth;
                                 cfg_wait_dac_ack       <= 1'b1;
@@ -451,7 +453,7 @@ module control #(
             cfg_req_sync_adc_d <= cfg_req_sync_adc;
 
             if (cfg_req_pulse_adc) begin
-                adc_pulse_period <= cfg_bus_eth[63:32];
+                adc_pulse_period <= cfg_bus_eth[127:96];
                 adc_pulse_num    <= cfg_bus_eth[79:64];
 
                 cfg_ack_toggle_adc <= ~cfg_ack_toggle_adc;

rtl/controller/tests/controller_tb.sv

@@ -139,9 +139,10 @@ module tb_control;
         input logic [31:0] pulse_width,
         input logic [31:0] pulse_period,
         input logic [15:0] pulse_num,
-        input logic [15:0] pulse_height_raw
+        input logic [15:0] pulse_height_raw,
+        input logic [31:0] pulse_period_adc
     );
-        logic [95:0] payload;
+        logic [127:0] payload;
         int i;
         begin
             // little-endian payload layout:
@@ -149,12 +150,14 @@ module tb_control;
             // [63:32]  pulse_period
             // [79:64]  pulse_num
             // [95:80]  pulse_height_raw
-            payload = {pulse_height_raw, pulse_num, pulse_period, pulse_width};
+            // [127:96] pulse_period_ADC
+    
+            payload = {pulse_period_adc, pulse_height_raw, pulse_num, pulse_period, pulse_width};
 
             axis_send_byte(8'h88, 1'b0); // CMD_SET_DATA
 
-            for (i = 0; i < 12; i++) begin
-                axis_send_byte(payload[i*8 +: 8], (i == 11));
+            for (i = 0; i < 16; i++) begin
+                axis_send_byte(payload[i*8 +: 8], (i == 15));
             end
         end
     endtask
@@ -219,6 +222,7 @@ module tb_control;
         input logic [31:0] exp_pulse_period,
         input logic [15:0] exp_pulse_num,
         input logic [15:0] exp_pulse_height_raw,
+        input logic [31:0] exp_pulse_period_adc,
         input int max_cycles = 200
     );
         logic [DAC_DATA_WIDTH-1:0] exp_dac_height;
@@ -232,7 +236,7 @@ module tb_control;
                     (dac_pulse_period === exp_pulse_period) &&
                     (dac_pulse_num    === exp_pulse_num   ) &&
                     (dac_pulse_height === exp_dac_height  ) &&
-                    (adc_pulse_period === exp_pulse_period) &&
+                    (adc_pulse_period === exp_pulse_period_adc) &&
                     (adc_pulse_num    === exp_pulse_num   )) begin
                     return;
                 end
@@ -252,6 +256,7 @@ module tb_control;
     logic [31:0] test_pulse_period;
     logic [15:0] test_pulse_num;
     logic [15:0] test_pulse_height_raw;
+    logic [31:0] test_pulse_period_adc;
 
     initial begin
         // defaults
@@ -265,6 +270,7 @@ module tb_control;
         test_pulse_period     = 32'h55667788;
         test_pulse_num        = 16'hA1B2;
         test_pulse_height_raw = 16'h0CDE; // for DAC_DATA_WIDTH=12 => 12'hCDE
+        test_pulse_period_adc = 32'h50607080;
 
         repeat (10) @(posedge eth_clk_in);
         rst_n = 1'b1;
@@ -291,14 +297,16 @@ module tb_control;
             test_pulse_width,
             test_pulse_period,
             test_pulse_num,
-            test_pulse_height_raw
+            test_pulse_height_raw,
+            test_pulse_period_adc
         );
 
         wait_cfg_applied(
             test_pulse_width,
             test_pulse_period,
             test_pulse_num,
-            test_pulse_height_raw
+            test_pulse_height_raw,
+            test_pulse_period_adc
         );
 
         if (dac_pulse_width !== 32'h11223344) begin
@@ -313,8 +321,8 @@ module tb_control;
         if (dac_pulse_height !== 12'hCDE) begin
             $fatal(1, "dac_pulse_height mismatch: got %h expected %h", dac_pulse_height, 12'hCDE);
         end
-        if (adc_pulse_period !== 32'h55667788) begin
-            $fatal(1, "adc_pulse_period mismatch: got %h expected %h", adc_pulse_period, 32'h55667788);
+        if (adc_pulse_period !== 32'h50607080) begin
+            $fatal(1, "adc_pulse_period mismatch: got %h expected %h", adc_pulse_period, 32'h50607080);
         end
         if (adc_pulse_num !== 16'hA1B2) begin
             $fatal(1, "adc_pulse_num mismatch: got %h expected %h", adc_pulse_num, 16'hA1B2);

rtl/controller/tests/tb_control_behav.wcfg

@@ -0,0 +1,197 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<wave_config>
+   <wave_state>
+   </wave_state>
+   <db_ref_list>
+      <db_ref path="tb_control_behav.wdb" id="1">
+         <top_modules>
+            <top_module name="glbl" />
+            <top_module name="tb_control" />
+         </top_modules>
+      </db_ref>
+   </db_ref_list>
+   <zoom_setting>
+      <ZoomStartTime time="0.676 ns"></ZoomStartTime>
+      <ZoomEndTime time="645.677 ns"></ZoomEndTime>
+      <Cursor1Time time="349.676 ns"></Cursor1Time>
+   </zoom_setting>
+   <column_width_setting>
+      <NameColumnWidth column_width="558"></NameColumnWidth>
+      <ValueColumnWidth column_width="61"></ValueColumnWidth>
+   </column_width_setting>
+   <WVObjectSize size="23" />
+   <wvobject type="logic" fp_name="/tb_control/eth_clk_in">
+      <obj_property name="ElementShortName">eth_clk_in</obj_property>
+      <obj_property name="ObjectShortName">eth_clk_in</obj_property>
+      <obj_property name="CustomSignalColor">#008080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/dac_clk_in">
+      <obj_property name="ElementShortName">dac_clk_in</obj_property>
+      <obj_property name="ObjectShortName">dac_clk_in</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/adc_clk_in">
+      <obj_property name="ElementShortName">adc_clk_in</obj_property>
+      <obj_property name="ObjectShortName">adc_clk_in</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/rst_n">
+      <obj_property name="ElementShortName">rst_n</obj_property>
+      <obj_property name="ObjectShortName">rst_n</obj_property>
+      <obj_property name="CustomSignalColor">#800080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_control/s_axis_tdata">
+      <obj_property name="ElementShortName">s_axis_tdata[7:0]</obj_property>
+      <obj_property name="ObjectShortName">s_axis_tdata[7:0]</obj_property>
+      <obj_property name="CustomSignalColor">#008080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+      <obj_property name="Radix">BINARYRADIX</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/s_axis_tvalid">
+      <obj_property name="ElementShortName">s_axis_tvalid</obj_property>
+      <obj_property name="ObjectShortName">s_axis_tvalid</obj_property>
+      <obj_property name="CustomSignalColor">#008080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/s_axis_tready">
+      <obj_property name="ElementShortName">s_axis_tready</obj_property>
+      <obj_property name="ObjectShortName">s_axis_tready</obj_property>
+      <obj_property name="CustomSignalColor">#008080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/s_axis_tlast">
+      <obj_property name="ElementShortName">s_axis_tlast</obj_property>
+      <obj_property name="ObjectShortName">s_axis_tlast</obj_property>
+      <obj_property name="CustomSignalColor">#008080</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/finish">
+      <obj_property name="ElementShortName">finish</obj_property>
+      <obj_property name="ObjectShortName">finish</obj_property>
+      <obj_property name="CustomSignalColor">#FAAFBE</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_control/dac_pulse_width">
+      <obj_property name="ElementShortName">dac_pulse_width[31:0]</obj_property>
+      <obj_property name="ObjectShortName">dac_pulse_width[31:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_control/dac_pulse_period">
+      <obj_property name="ElementShortName">dac_pulse_period[31:0]</obj_property>
+      <obj_property name="ObjectShortName">dac_pulse_period[31:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_control/dac_pulse_height">
+      <obj_property name="ElementShortName">dac_pulse_height[11:0]</obj_property>
+      <obj_property name="ObjectShortName">dac_pulse_height[11:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+      <obj_property name="Radix">HEXRADIX</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_control/dac_pulse_num">
+      <obj_property name="ElementShortName">dac_pulse_num[15:0]</obj_property>
+      <obj_property name="ObjectShortName">dac_pulse_num[15:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_control/adc_pulse_period">
+      <obj_property name="ElementShortName">adc_pulse_period[31:0]</obj_property>
+      <obj_property name="ObjectShortName">adc_pulse_period[31:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_control/adc_pulse_num">
+      <obj_property name="ElementShortName">adc_pulse_num[15:0]</obj_property>
+      <obj_property name="ObjectShortName">adc_pulse_num[15:0]</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/dac_start">
+      <obj_property name="ElementShortName">dac_start</obj_property>
+      <obj_property name="ObjectShortName">dac_start</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/adc_start">
+      <obj_property name="ElementShortName">adc_start</obj_property>
+      <obj_property name="ObjectShortName">adc_start</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/dac_rst">
+      <obj_property name="ElementShortName">dac_rst</obj_property>
+      <obj_property name="ObjectShortName">dac_rst</obj_property>
+      <obj_property name="CustomSignalColor">#FFA500</obj_property>
+      <obj_property name="UseCustomSignalColor">true</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/adc_rst">
+      <obj_property name="ElementShortName">adc_rst</obj_property>
+      <obj_property name="ObjectShortName">adc_rst</obj_property>
+   </wvobject>
+   <wvobject type="group" fp_name="group499">
+      <obj_property name="label">tb signals</obj_property>
+      <obj_property name="DisplayName">label</obj_property>
+      <wvobject type="array" fp_name="/tb_control/dac_rst_count">
+         <obj_property name="ElementShortName">dac_rst_count[31:0]</obj_property>
+         <obj_property name="ObjectShortName">dac_rst_count[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_control/adc_rst_count">
+         <obj_property name="ElementShortName">adc_rst_count[31:0]</obj_property>
+         <obj_property name="ObjectShortName">adc_rst_count[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_control/dac_start_count">
+         <obj_property name="ElementShortName">dac_start_count[31:0]</obj_property>
+         <obj_property name="ObjectShortName">dac_start_count[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_control/adc_start_count">
+         <obj_property name="ElementShortName">adc_start_count[31:0]</obj_property>
+         <obj_property name="ObjectShortName">adc_start_count[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_control/test_pulse_width">
+         <obj_property name="ElementShortName">test_pulse_width[31:0]</obj_property>
+         <obj_property name="ObjectShortName">test_pulse_width[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_control/test_pulse_period">
+         <obj_property name="ElementShortName">test_pulse_period[31:0]</obj_property>
+         <obj_property name="ObjectShortName">test_pulse_period[31:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_control/test_pulse_num">
+         <obj_property name="ElementShortName">test_pulse_num[15:0]</obj_property>
+         <obj_property name="ObjectShortName">test_pulse_num[15:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+      <wvobject type="array" fp_name="/tb_control/test_pulse_height_raw">
+         <obj_property name="ElementShortName">test_pulse_height_raw[15:0]</obj_property>
+         <obj_property name="ObjectShortName">test_pulse_height_raw[15:0]</obj_property>
+         <obj_property name="CustomSignalColor">#F0E68C</obj_property>
+         <obj_property name="UseCustomSignalColor">true</obj_property>
+      </wvobject>
+   </wvobject>
+   <wvobject type="array" fp_name="/tb_control/DAC_DATA_WIDTH">
+      <obj_property name="ElementShortName">DAC_DATA_WIDTH[31:0]</obj_property>
+      <obj_property name="ObjectShortName">DAC_DATA_WIDTH[31:0]</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/dut/cfg_ack_toggle_adc">
+      <obj_property name="ElementShortName">cfg_ack_toggle_adc</obj_property>
+      <obj_property name="ObjectShortName">cfg_ack_toggle_adc</obj_property>
+   </wvobject>
+   <wvobject type="logic" fp_name="/tb_control/dut/cfg_ack_toggle_dac">
+      <obj_property name="ElementShortName">cfg_ack_toggle_dac</obj_property>
+      <obj_property name="ObjectShortName">cfg_ack_toggle_dac</obj_property>
+   </wvobject>
+</wave_config>

rtl/ethernet-udp/src/eth/axis_mac.sv

@@ -283,6 +283,8 @@ module axis_mac
     reg [31:0] arp_delay;
     reg arp_cached;
 
+    reg write_en_flag;
+
     always @(posedge gmii_tx_clk or negedge rst_n) begin
         if (!rst_n) begin
             tx_state             <= TX_IDLE;
@@ -293,8 +295,8 @@ module axis_mac
             udp_send_data_length <= 16'd0;
             udp_tx_req           <= 1'b0;
             arp_delay            <= 32'b0;
+            write_en_flag        <= 1'b0;
 
-            s_axis_tx_tready     <= 1'b0;
             req_ready            <= 1'b0;
 
             tx_req_len           <= 16'd0;
@@ -309,8 +311,8 @@ module axis_mac
             case (tx_state)
                 // Ready to accept a new packet request
                 TX_IDLE: begin
+                    write_en_flag        <= 1'b0;
                     udp_tx_req       <= 1'b0;
-                    s_axis_tx_tready <= 1'b0;
                     tx_bytes_written <= 16'd0;
                     tx_req_inflight  <= 1'b0;
 
@@ -340,7 +342,6 @@ module axis_mac
                 // Pulse ARP request
                 TX_ARP_REQ: begin
                     req_ready        <= 1'b0;
-                    s_axis_tx_tready <= 1'b0;
                     udp_tx_req       <= 1'b0;
                     
                     arp_delay        <= 32'ha000000;
@@ -350,7 +351,6 @@ module axis_mac
                 // Wait until ARP is resolved
                 TX_ARP_SEND: begin
                     req_ready        <= 1'b0;
-                    s_axis_tx_tready <= 1'b0;
                     udp_tx_req       <= 1'b0;
 
                     // sent
@@ -383,7 +383,7 @@ module axis_mac
 
                     if (udp_ram_data_req) begin
                         udp_tx_req       <= 1'b0;
-                        s_axis_tx_tready <= 1'b1;
+                        write_en_flag <= 1'b1;
                         tx_state         <= TX_STREAM;
                     end
                 end
@@ -394,7 +394,6 @@ module axis_mac
                     udp_tx_req <= 1'b0;
 
                     // keep ready high while receiving payload bytes
-                    s_axis_tx_tready <= (tx_bytes_written < tx_req_len);
 
                     if (s_axis_tx_tvalid && s_axis_tx_tready) begin
                         tx_ram_wr_data <= s_axis_tx_tdata;
@@ -403,7 +402,6 @@ module axis_mac
                         tx_bytes_written <= tx_bytes_written + 1'b1;
 
                         if (tx_bytes_written + 1'b1 >= tx_req_len) begin
-                            s_axis_tx_tready <= 1'b0;
                             tx_state         <= TX_WAIT_DRAIN;
                         end
                     end
@@ -413,7 +411,8 @@ module axis_mac
                 // Wait until TX RAM starts draining enough to allow
                 // the next request.
                 TX_WAIT_DRAIN: begin
-                    s_axis_tx_tready <= 1'b0;
+                    // s_axis_tx_tready <= 1'b0;
+                    write_en_flag        <= 1'b0;
                     udp_tx_req       <= 1'b0;
 
                     if (udp_ram_data_count <= tx_release_threshold)
@@ -425,11 +424,13 @@ module axis_mac
                     tx_state         <= TX_IDLE;
                     tx_ram_wr_en     <= 1'b0;
                     udp_tx_req       <= 1'b0;
-                    s_axis_tx_tready <= 1'b0;
                     req_ready        <= 1'b0;
+                    write_en_flag        <= 1'b0;
                 end
             endcase
         end
     end
 
+    assign s_axis_tx_tready = write_en_flag || udp_ram_data_req;
+
 endmodule

rtl/ethernet-udp/src/eth/mac/mac_test.v

@@ -4,7 +4,7 @@
 //Description :
 //
 //////////////////////////////////////////////////////////////////////////////////////
-`define TEST_SPEED
+//`define TEST_SPEED
 `timescale 1 ns/1 ns
 module mac_test
 (

rtl/ethernet-udp/tests/eth_axis/Makefile

@@ -7,7 +7,7 @@
 #
 
 # FPGA settings
-FPGA_PART = xc7a35tfgg484-1
+FPGA_PART = xc7a100tfgg484-2
 FPGA_TOP = ethernet_axis_echo
 FPGA_ARCH = artix7
 
@@ -23,7 +23,7 @@ SYN_FILES += $(sort $(shell find ../../src -type f \( -name '*.v' -o -name '*.sv
 XCI_FILES = $(sort $(shell find ../../src -type f -name '*.xci'))
 
 XDC_FILES += debug.xdc
-XDC_FILES += ../../../../constraints/ax7a035b.xdc
+XDC_FILES += ../../../../constraints/ax7102.xdc
 
 SIM_TOP = tb_mac_test
 TB_FILES = test_axis_mac_rx.sv

rtl/ethernet-udp/tests/eth_axis/debug.xdc

@@ -1,5 +1,36 @@
 # debug ila
 
+connect_debug_port u_ila_0/clk [get_nets [list rgmii_rxc_IBUF_BUFG]]
+connect_debug_port u_ila_0/probe9 [get_nets [list {axis_mac0/udp_rec_data_length[0]} {axis_mac0/udp_rec_data_length[1]} {axis_mac0/udp_rec_data_length[2]} {axis_mac0/udp_rec_data_length[3]} {axis_mac0/udp_rec_data_length[4]} {axis_mac0/udp_rec_data_length[5]} {axis_mac0/udp_rec_data_length[6]} {axis_mac0/udp_rec_data_length[7]} {axis_mac0/udp_rec_data_length[8]} {axis_mac0/udp_rec_data_length[9]} {axis_mac0/udp_rec_data_length[10]} {axis_mac0/udp_rec_data_length[11]} {axis_mac0/udp_rec_data_length[12]} {axis_mac0/udp_rec_data_length[13]} {axis_mac0/udp_rec_data_length[14]} {axis_mac0/udp_rec_data_length[15]}]]
+connect_debug_port dbg_hub/clk [get_nets rgmii_rxc_IBUF_BUFG]
+
+connect_debug_port u_ila_0/probe22 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[0]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[1]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[2]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[3]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[4]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[5]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[6]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[7]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[8]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[9]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[10]}]]
+connect_debug_port u_ila_0/probe23 [get_nets [list {mac_test0/mac_top0/mac_rx0/mac_rx_datain[0]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[1]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[2]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[3]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[4]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[5]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[6]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[7]}]]
+connect_debug_port u_ila_0/probe24 [get_nets [list {mac_test0/mac_top0/mac_rx0/ip_total_data_length[0]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[1]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[2]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[3]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[4]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[5]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[6]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[7]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[8]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[9]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[10]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[11]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[12]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[13]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[14]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[15]}]]
+connect_debug_port u_ila_0/probe25 [get_nets [list {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[0]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[1]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[2]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[3]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[4]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[5]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[6]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[7]}]]
+connect_debug_port u_ila_0/probe26 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[0]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[1]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[2]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[3]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[4]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[5]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[6]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[7]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[8]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[9]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[10]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[11]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[12]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[13]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[14]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[15]}]]
+connect_debug_port u_ila_0/probe27 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[0]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[1]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[2]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[3]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[4]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[5]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[6]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[7]}]]
+connect_debug_port u_ila_0/probe28 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[0]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[1]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[2]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[3]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[4]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[5]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[6]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[7]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[8]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[9]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[10]}]]
+connect_debug_port u_ila_0/probe29 [get_nets [list {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[0]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[1]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[2]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[3]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[4]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[5]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[6]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[7]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[8]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[9]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[10]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[11]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[12]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[13]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[14]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[15]}]]
+connect_debug_port u_ila_0/probe30 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp0/ck_state[0]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[1]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[2]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[3]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[4]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[5]}]]
+connect_debug_port u_ila_0/probe31 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp0/state[0]} {mac_test0/mac_top0/mac_tx0/udp0/state[1]} {mac_test0/mac_top0/mac_tx0/udp0/state[2]} {mac_test0/mac_top0/mac_tx0/udp0/state[3]} {mac_test0/mac_top0/mac_tx0/udp0/state[4]} {mac_test0/mac_top0/mac_tx0/udp0/state[5]}]]
+connect_debug_port u_ila_0/probe32 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp0/usedw[0]} {mac_test0/mac_top0/mac_tx0/udp0/usedw[1]} {mac_test0/mac_top0/mac_tx0/udp0/usedw[2]} {mac_test0/mac_top0/mac_tx0/udp0/usedw[3]}]]
+connect_debug_port u_ila_0/probe33 [get_nets [list {mac_test0/mac_top0/mac_tx0/mac_tx_data[0]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[1]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[2]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[3]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[4]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[5]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[6]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[7]}]]
+connect_debug_port u_ila_0/probe34 [get_nets [list {mac_test0/mac_top0/mac_tx0/ram_wr_data[0]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[1]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[2]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[3]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[4]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[5]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[6]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[7]}]]
+connect_debug_port u_ila_0/probe35 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[0]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[1]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[2]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[3]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[4]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[5]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[6]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[7]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[8]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[9]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[10]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[11]}]]
+connect_debug_port u_ila_0/probe36 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp_send_data_length[0]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[1]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[2]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[3]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[4]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[5]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[6]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[7]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[8]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[9]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[10]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[11]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[12]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[13]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[14]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[15]}]]
+connect_debug_port u_ila_0/probe37 [get_nets [list {mac_test0/state[0]} {mac_test0/state[1]} {mac_test0/state[2]} {mac_test0/state[3]} {mac_test0/state[4]} {mac_test0/state[5]} {mac_test0/state[6]} {mac_test0/state[7]} {mac_test0/state[8]}]]
+connect_debug_port u_ila_0/probe39 [get_nets [list mac_test0/mac_top0/mac_tx0/almost_full]]
+connect_debug_port u_ila_0/probe45 [get_nets [list mac_test0/mac_top0/mac_tx0/mac_data_valid]]
+connect_debug_port u_ila_0/probe47 [get_nets [list mac_test0/mac_top0/mac_tx0/mac_send_end]]
+connect_debug_port u_ila_0/probe48 [get_nets [list mac_test0/mac_top0/mac_tx0/ram_wr_en]]
+connect_debug_port u_ila_0/probe50 [get_nets [list mac_test0/mac_top0/mac_rx0/udp0/ram_wr_en]]
+connect_debug_port u_ila_0/probe59 [get_nets [list mac_test0/mac_top0/mac_tx0/udp_ram_data_req]]
+connect_debug_port u_ila_0/probe62 [get_nets [list mac_test0/mac_top0/mac_rx0/udp_rec_data_valid]]
+connect_debug_port u_ila_0/probe64 [get_nets [list mac_test0/mac_top0/mac_tx0/udp_tx_end]]
+connect_debug_port u_ila_0/probe66 [get_nets [list mac_test0/mac_top0/mac_tx0/udp_tx_req]]
+connect_debug_port u_ila_0/probe68 [get_nets [list mac_test0/mac_top0/mac_tx0/upper_data_req]]
+
 create_debug_core u_ila_0 ila
 set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_0]
 set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_0]
@@ -10,251 +41,179 @@ set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_0]
 set_property C_TRIGIN_EN false [get_debug_cores u_ila_0]
 set_property C_TRIGOUT_EN false [get_debug_cores u_ila_0]
 set_property port_width 1 [get_debug_ports u_ila_0/clk]
-connect_debug_port u_ila_0/clk [get_nets [list rgmii_rxc_IBUF_BUFG]]
+connect_debug_port u_ila_0/clk [get_nets [list e_gtxc_OBUF_BUFG]]
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe0]
-set_property port_width 8 [get_debug_ports u_ila_0/probe0]
-connect_debug_port u_ila_0/probe0 [get_nets [list {arbi_inst/rx_buffer_inst/e10_100_rxd[0]} {arbi_inst/rx_buffer_inst/e10_100_rxd[1]} {arbi_inst/rx_buffer_inst/e10_100_rxd[2]} {arbi_inst/rx_buffer_inst/e10_100_rxd[3]} {arbi_inst/rx_buffer_inst/e10_100_rxd[4]} {arbi_inst/rx_buffer_inst/e10_100_rxd[5]} {arbi_inst/rx_buffer_inst/e10_100_rxd[6]} {arbi_inst/rx_buffer_inst/e10_100_rxd[7]}]]
+set_property port_width 6 [get_debug_ports u_ila_0/probe0]
+connect_debug_port u_ila_0/probe0 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp0/state[0]} {axis_mac0/mac_top0/mac_tx0/udp0/state[1]} {axis_mac0/mac_top0/mac_tx0/udp0/state[2]} {axis_mac0/mac_top0/mac_tx0/udp0/state[3]} {axis_mac0/mac_top0/mac_tx0/udp0/state[4]} {axis_mac0/mac_top0/mac_tx0/udp0/state[5]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe1]
-set_property port_width 8 [get_debug_ports u_ila_0/probe1]
-connect_debug_port u_ila_0/probe1 [get_nets [list {arbi_inst/gmii_rxd[0]} {arbi_inst/gmii_rxd[1]} {arbi_inst/gmii_rxd[2]} {arbi_inst/gmii_rxd[3]} {arbi_inst/gmii_rxd[4]} {arbi_inst/gmii_rxd[5]} {arbi_inst/gmii_rxd[6]} {arbi_inst/gmii_rxd[7]}]]
+set_property port_width 6 [get_debug_ports u_ila_0/probe1]
+connect_debug_port u_ila_0/probe1 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[0]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[1]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[2]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[3]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[4]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[5]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe2]
-set_property port_width 8 [get_debug_ports u_ila_0/probe2]
-connect_debug_port u_ila_0/probe2 [get_nets [list {arbi_inst/gmii_txd[0]} {arbi_inst/gmii_txd[1]} {arbi_inst/gmii_txd[2]} {arbi_inst/gmii_txd[3]} {arbi_inst/gmii_txd[4]} {arbi_inst/gmii_txd[5]} {arbi_inst/gmii_txd[6]} {arbi_inst/gmii_txd[7]}]]
+set_property port_width 4 [get_debug_ports u_ila_0/probe2]
+connect_debug_port u_ila_0/probe2 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp0/usedw[0]} {axis_mac0/mac_top0/mac_tx0/udp0/usedw[1]} {axis_mac0/mac_top0/mac_tx0/udp0/usedw[2]} {axis_mac0/mac_top0/mac_tx0/udp0/usedw[3]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe3]
 set_property port_width 8 [get_debug_ports u_ila_0/probe3]
-connect_debug_port u_ila_0/probe3 [get_nets [list {arbi_inst/e_txd[0]} {arbi_inst/e_txd[1]} {arbi_inst/e_txd[2]} {arbi_inst/e_txd[3]} {arbi_inst/e_txd[4]} {arbi_inst/e_txd[5]} {arbi_inst/e_txd[6]} {arbi_inst/e_txd[7]}]]
+connect_debug_port u_ila_0/probe3 [get_nets [list {axis_mac0/s_axis_tx_tdata[0]} {axis_mac0/s_axis_tx_tdata[1]} {axis_mac0/s_axis_tx_tdata[2]} {axis_mac0/s_axis_tx_tdata[3]} {axis_mac0/s_axis_tx_tdata[4]} {axis_mac0/s_axis_tx_tdata[5]} {axis_mac0/s_axis_tx_tdata[6]} {axis_mac0/s_axis_tx_tdata[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe4]
-set_property port_width 8 [get_debug_ports u_ila_0/probe4]
-connect_debug_port u_ila_0/probe4 [get_nets [list {arbi_inst/e_rxd[0]} {arbi_inst/e_rxd[1]} {arbi_inst/e_rxd[2]} {arbi_inst/e_rxd[3]} {arbi_inst/e_rxd[4]} {arbi_inst/e_rxd[5]} {arbi_inst/e_rxd[6]} {arbi_inst/e_rxd[7]}]]
+set_property port_width 16 [get_debug_ports u_ila_0/probe4]
+connect_debug_port u_ila_0/probe4 [get_nets [list {axis_mac0/rx_payload_len[0]} {axis_mac0/rx_payload_len[1]} {axis_mac0/rx_payload_len[2]} {axis_mac0/rx_payload_len[3]} {axis_mac0/rx_payload_len[4]} {axis_mac0/rx_payload_len[5]} {axis_mac0/rx_payload_len[6]} {axis_mac0/rx_payload_len[7]} {axis_mac0/rx_payload_len[8]} {axis_mac0/rx_payload_len[9]} {axis_mac0/rx_payload_len[10]} {axis_mac0/rx_payload_len[11]} {axis_mac0/rx_payload_len[12]} {axis_mac0/rx_payload_len[13]} {axis_mac0/rx_payload_len[14]} {axis_mac0/rx_payload_len[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe5]
-set_property port_width 16 [get_debug_ports u_ila_0/probe5]
-connect_debug_port u_ila_0/probe5 [get_nets [list {arbi_inst/tx_buffer_inst/tx_data_cnt[0]} {arbi_inst/tx_buffer_inst/tx_data_cnt[1]} {arbi_inst/tx_buffer_inst/tx_data_cnt[2]} {arbi_inst/tx_buffer_inst/tx_data_cnt[3]} {arbi_inst/tx_buffer_inst/tx_data_cnt[4]} {arbi_inst/tx_buffer_inst/tx_data_cnt[5]} {arbi_inst/tx_buffer_inst/tx_data_cnt[6]} {arbi_inst/tx_buffer_inst/tx_data_cnt[7]} {arbi_inst/tx_buffer_inst/tx_data_cnt[8]} {arbi_inst/tx_buffer_inst/tx_data_cnt[9]} {arbi_inst/tx_buffer_inst/tx_data_cnt[10]} {arbi_inst/tx_buffer_inst/tx_data_cnt[11]} {arbi_inst/tx_buffer_inst/tx_data_cnt[12]} {arbi_inst/tx_buffer_inst/tx_data_cnt[13]} {arbi_inst/tx_buffer_inst/tx_data_cnt[14]} {arbi_inst/tx_buffer_inst/tx_data_cnt[15]}]]
+set_property port_width 2 [get_debug_ports u_ila_0/probe5]
+connect_debug_port u_ila_0/probe5 [get_nets [list {axis_mac0/rx_state[0]} {axis_mac0/rx_state[1]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe6]
 set_property port_width 8 [get_debug_ports u_ila_0/probe6]
-connect_debug_port u_ila_0/probe6 [get_nets [list {arbi_inst/tx_buffer_inst/tx_rdata[0]} {arbi_inst/tx_buffer_inst/tx_rdata[1]} {arbi_inst/tx_buffer_inst/tx_rdata[2]} {arbi_inst/tx_buffer_inst/tx_rdata[3]} {arbi_inst/tx_buffer_inst/tx_rdata[4]} {arbi_inst/tx_buffer_inst/tx_rdata[5]} {arbi_inst/tx_buffer_inst/tx_rdata[6]} {arbi_inst/tx_buffer_inst/tx_rdata[7]}]]
+connect_debug_port u_ila_0/probe6 [get_nets [list {axis_mac0/m_axis_rx_tdata[0]} {axis_mac0/m_axis_rx_tdata[1]} {axis_mac0/m_axis_rx_tdata[2]} {axis_mac0/m_axis_rx_tdata[3]} {axis_mac0/m_axis_rx_tdata[4]} {axis_mac0/m_axis_rx_tdata[5]} {axis_mac0/m_axis_rx_tdata[6]} {axis_mac0/m_axis_rx_tdata[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe7]
-set_property port_width 8 [get_debug_ports u_ila_0/probe7]
-connect_debug_port u_ila_0/probe7 [get_nets [list {arbi_inst/tx_buffer_inst/tx_wdata[0]} {arbi_inst/tx_buffer_inst/tx_wdata[1]} {arbi_inst/tx_buffer_inst/tx_wdata[2]} {arbi_inst/tx_buffer_inst/tx_wdata[3]} {arbi_inst/tx_buffer_inst/tx_wdata[4]} {arbi_inst/tx_buffer_inst/tx_wdata[5]} {arbi_inst/tx_buffer_inst/tx_wdata[6]} {arbi_inst/tx_buffer_inst/tx_wdata[7]}]]
+set_property port_width 16 [get_debug_ports u_ila_0/probe7]
+connect_debug_port u_ila_0/probe7 [get_nets [list {axis_mac0/rx_index[0]} {axis_mac0/rx_index[1]} {axis_mac0/rx_index[2]} {axis_mac0/rx_index[3]} {axis_mac0/rx_index[4]} {axis_mac0/rx_index[5]} {axis_mac0/rx_index[6]} {axis_mac0/rx_index[7]} {axis_mac0/rx_index[8]} {axis_mac0/rx_index[9]} {axis_mac0/rx_index[10]} {axis_mac0/rx_index[11]} {axis_mac0/rx_index[12]} {axis_mac0/rx_index[13]} {axis_mac0/rx_index[14]} {axis_mac0/rx_index[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe8]
-set_property port_width 6 [get_debug_ports u_ila_0/probe8]
-connect_debug_port u_ila_0/probe8 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[0]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[1]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[2]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[3]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[4]} {axis_mac0/mac_top0/mac_tx0/udp0/ck_state[5]}]]
+set_property port_width 3 [get_debug_ports u_ila_0/probe8]
+connect_debug_port u_ila_0/probe8 [get_nets [list {axis_mac0/tx_state[0]} {axis_mac0/tx_state[1]} {axis_mac0/tx_state[2]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe9]
-set_property port_width 16 [get_debug_ports u_ila_0/probe9]
-connect_debug_port u_ila_0/probe9 [get_nets [list {axis_mac0/udp_rec_data_length[0]} {axis_mac0/udp_rec_data_length[1]} {axis_mac0/udp_rec_data_length[2]} {axis_mac0/udp_rec_data_length[3]} {axis_mac0/udp_rec_data_length[4]} {axis_mac0/udp_rec_data_length[5]} {axis_mac0/udp_rec_data_length[6]} {axis_mac0/udp_rec_data_length[7]} {axis_mac0/udp_rec_data_length[8]} {axis_mac0/udp_rec_data_length[9]} {axis_mac0/udp_rec_data_length[10]} {axis_mac0/udp_rec_data_length[11]} {axis_mac0/udp_rec_data_length[12]} {axis_mac0/udp_rec_data_length[13]} {axis_mac0/udp_rec_data_length[14]} {axis_mac0/udp_rec_data_length[15]}]]
+set_property port_width 2 [get_debug_ports u_ila_0/probe9]
+connect_debug_port u_ila_0/probe9 [get_nets [list {test_state[0]} {test_state[1]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe10]
-set_property port_width 3 [get_debug_ports u_ila_0/probe10]
-connect_debug_port u_ila_0/probe10 [get_nets [list {axis_mac0/tx_state[0]} {axis_mac0/tx_state[1]} {axis_mac0/tx_state[2]}]]
+set_property port_width 16 [get_debug_ports u_ila_0/probe10]
+connect_debug_port u_ila_0/probe10 [get_nets [list {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[0]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[1]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[2]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[3]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[4]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[5]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[6]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[7]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[8]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[9]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[10]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[11]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[12]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[13]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[14]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe11]
-set_property port_width 8 [get_debug_ports u_ila_0/probe11]
-connect_debug_port u_ila_0/probe11 [get_nets [list {axis_mac0/s_axis_tx_tdata[0]} {axis_mac0/s_axis_tx_tdata[1]} {axis_mac0/s_axis_tx_tdata[2]} {axis_mac0/s_axis_tx_tdata[3]} {axis_mac0/s_axis_tx_tdata[4]} {axis_mac0/s_axis_tx_tdata[5]} {axis_mac0/s_axis_tx_tdata[6]} {axis_mac0/s_axis_tx_tdata[7]}]]
+set_property port_width 11 [get_debug_ports u_ila_0/probe11]
+connect_debug_port u_ila_0/probe11 [get_nets [list {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[0]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[1]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[2]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[3]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[4]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[5]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[6]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[7]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[8]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[9]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[10]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe12]
-set_property port_width 2 [get_debug_ports u_ila_0/probe12]
-connect_debug_port u_ila_0/probe12 [get_nets [list {axis_mac0/rx_state[0]} {axis_mac0/rx_state[1]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe12]
+connect_debug_port u_ila_0/probe12 [get_nets [list {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[0]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[1]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[2]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[3]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[4]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[5]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[6]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe13]
 set_property port_width 16 [get_debug_ports u_ila_0/probe13]
-connect_debug_port u_ila_0/probe13 [get_nets [list {axis_mac0/rx_payload_len[0]} {axis_mac0/rx_payload_len[1]} {axis_mac0/rx_payload_len[2]} {axis_mac0/rx_payload_len[3]} {axis_mac0/rx_payload_len[4]} {axis_mac0/rx_payload_len[5]} {axis_mac0/rx_payload_len[6]} {axis_mac0/rx_payload_len[7]} {axis_mac0/rx_payload_len[8]} {axis_mac0/rx_payload_len[9]} {axis_mac0/rx_payload_len[10]} {axis_mac0/rx_payload_len[11]} {axis_mac0/rx_payload_len[12]} {axis_mac0/rx_payload_len[13]} {axis_mac0/rx_payload_len[14]} {axis_mac0/rx_payload_len[15]}]]
+connect_debug_port u_ila_0/probe13 [get_nets [list {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[0]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[1]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[2]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[3]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[4]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[5]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[6]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[7]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[8]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[9]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[10]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[11]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[12]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[13]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[14]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe14]
-set_property port_width 16 [get_debug_ports u_ila_0/probe14]
-connect_debug_port u_ila_0/probe14 [get_nets [list {axis_mac0/rx_index[0]} {axis_mac0/rx_index[1]} {axis_mac0/rx_index[2]} {axis_mac0/rx_index[3]} {axis_mac0/rx_index[4]} {axis_mac0/rx_index[5]} {axis_mac0/rx_index[6]} {axis_mac0/rx_index[7]} {axis_mac0/rx_index[8]} {axis_mac0/rx_index[9]} {axis_mac0/rx_index[10]} {axis_mac0/rx_index[11]} {axis_mac0/rx_index[12]} {axis_mac0/rx_index[13]} {axis_mac0/rx_index[14]} {axis_mac0/rx_index[15]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe14]
+connect_debug_port u_ila_0/probe14 [get_nets [list {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[0]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[1]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[2]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[3]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[4]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[5]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[6]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe15]
-set_property port_width 8 [get_debug_ports u_ila_0/probe15]
-connect_debug_port u_ila_0/probe15 [get_nets [list {axis_mac0/m_axis_rx_tdata[0]} {axis_mac0/m_axis_rx_tdata[1]} {axis_mac0/m_axis_rx_tdata[2]} {axis_mac0/m_axis_rx_tdata[3]} {axis_mac0/m_axis_rx_tdata[4]} {axis_mac0/m_axis_rx_tdata[5]} {axis_mac0/m_axis_rx_tdata[6]} {axis_mac0/m_axis_rx_tdata[7]}]]
+set_property port_width 16 [get_debug_ports u_ila_0/probe15]
+connect_debug_port u_ila_0/probe15 [get_nets [list {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[0]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[1]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[2]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[3]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[4]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[5]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[6]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[7]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[8]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[9]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[10]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[11]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[12]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[13]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[14]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe16]
-set_property port_width 16 [get_debug_ports u_ila_0/probe16]
-connect_debug_port u_ila_0/probe16 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[0]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[1]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[2]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[3]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[4]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[5]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[6]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[7]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[8]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[9]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[10]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[11]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[12]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[13]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[14]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[15]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe16]
+connect_debug_port u_ila_0/probe16 [get_nets [list {axis_mac0/mac_top0/mac_tx0/mac_tx_data[0]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[1]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[2]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[3]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[4]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[5]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[6]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe17]
-set_property port_width 12 [get_debug_ports u_ila_0/probe17]
-connect_debug_port u_ila_0/probe17 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[0]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[1]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[2]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[3]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[4]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[5]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[6]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[7]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[8]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[9]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[10]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[11]}]]
+set_property port_width 16 [get_debug_ports u_ila_0/probe17]
+connect_debug_port u_ila_0/probe17 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[0]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[1]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[2]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[3]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[4]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[5]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[6]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[7]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[8]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[9]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[10]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[11]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[12]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[13]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[14]} {axis_mac0/mac_top0/mac_tx0/udp_send_data_length[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe18]
-set_property port_width 8 [get_debug_ports u_ila_0/probe18]
-connect_debug_port u_ila_0/probe18 [get_nets [list {axis_mac0/mac_top0/mac_tx0/ram_wr_data[0]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[1]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[2]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[3]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[4]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[5]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[6]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[7]}]]
+set_property port_width 12 [get_debug_ports u_ila_0/probe18]
+connect_debug_port u_ila_0/probe18 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[0]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[1]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[2]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[3]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[4]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[5]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[6]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[7]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[8]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[9]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[10]} {axis_mac0/mac_top0/mac_tx0/udp_ram_data_count[11]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe19]
 set_property port_width 8 [get_debug_ports u_ila_0/probe19]
-connect_debug_port u_ila_0/probe19 [get_nets [list {axis_mac0/mac_top0/mac_tx0/mac_tx_data[0]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[1]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[2]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[3]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[4]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[5]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[6]} {axis_mac0/mac_top0/mac_tx0/mac_tx_data[7]}]]
+connect_debug_port u_ila_0/probe19 [get_nets [list {axis_mac0/mac_top0/mac_tx0/ram_wr_data[0]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[1]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[2]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[3]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[4]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[5]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[6]} {axis_mac0/mac_top0/mac_tx0/ram_wr_data[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe20]
-set_property port_width 4 [get_debug_ports u_ila_0/probe20]
-connect_debug_port u_ila_0/probe20 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp0/usedw[0]} {axis_mac0/mac_top0/mac_tx0/udp0/usedw[1]} {axis_mac0/mac_top0/mac_tx0/udp0/usedw[2]} {axis_mac0/mac_top0/mac_tx0/udp0/usedw[3]}]]
+set_property port_width 11 [get_debug_ports u_ila_0/probe20]
+connect_debug_port u_ila_0/probe20 [get_nets [list {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[0]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[1]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[2]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[3]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[4]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[5]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[6]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[7]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[8]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[9]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[10]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe21]
-set_property port_width 6 [get_debug_ports u_ila_0/probe21]
-connect_debug_port u_ila_0/probe21 [get_nets [list {axis_mac0/mac_top0/mac_tx0/udp0/state[0]} {axis_mac0/mac_top0/mac_tx0/udp0/state[1]} {axis_mac0/mac_top0/mac_tx0/udp0/state[2]} {axis_mac0/mac_top0/mac_tx0/udp0/state[3]} {axis_mac0/mac_top0/mac_tx0/udp0/state[4]} {axis_mac0/mac_top0/mac_tx0/udp0/state[5]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe21]
+connect_debug_port u_ila_0/probe21 [get_nets [list {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[0]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[1]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[2]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[3]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[4]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[5]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[6]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe22]
-set_property port_width 16 [get_debug_ports u_ila_0/probe22]
-connect_debug_port u_ila_0/probe22 [get_nets [list {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[0]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[1]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[2]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[3]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[4]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[5]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[6]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[7]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[8]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[9]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[10]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[11]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[12]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[13]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[14]} {axis_mac0/mac_top0/mac_rx0/upper_layer_data_length[15]}]]
+set_property port_width 1 [get_debug_ports u_ila_0/probe22]
+connect_debug_port u_ila_0/probe22 [get_nets [list axis_mac0/mac_top0/mac_tx0/almost_full]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe23]
-set_property port_width 11 [get_debug_ports u_ila_0/probe23]
-connect_debug_port u_ila_0/probe23 [get_nets [list {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[0]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[1]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[2]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[3]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[4]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[5]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[6]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[7]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[8]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[9]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_read_addr[10]}]]
+set_property port_width 1 [get_debug_ports u_ila_0/probe23]
+connect_debug_port u_ila_0/probe23 [get_nets [list axis_mac0/arp_found]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe24]
-set_property port_width 8 [get_debug_ports u_ila_0/probe24]
-connect_debug_port u_ila_0/probe24 [get_nets [list {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[0]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[1]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[2]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[3]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[4]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[5]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[6]} {axis_mac0/mac_top0/mac_rx0/udp_rec_ram_rdata[7]}]]
+set_property port_width 1 [get_debug_ports u_ila_0/probe24]
+connect_debug_port u_ila_0/probe24 [get_nets [list axis_mac0/m_axis_rx_tlast]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe25]
-set_property port_width 16 [get_debug_ports u_ila_0/probe25]
-connect_debug_port u_ila_0/probe25 [get_nets [list {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[0]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[1]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[2]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[3]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[4]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[5]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[6]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[7]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[8]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[9]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[10]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[11]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[12]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[13]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[14]} {axis_mac0/mac_top0/mac_rx0/udp_rec_data_length[15]}]]
+set_property port_width 1 [get_debug_ports u_ila_0/probe25]
+connect_debug_port u_ila_0/probe25 [get_nets [list axis_mac0/m_axis_rx_tready]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe26]
-set_property port_width 8 [get_debug_ports u_ila_0/probe26]
-connect_debug_port u_ila_0/probe26 [get_nets [list {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[0]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[1]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[2]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[3]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[4]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[5]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[6]} {axis_mac0/mac_top0/mac_rx0/mac_rx_dataout[7]}]]
+set_property port_width 1 [get_debug_ports u_ila_0/probe26]
+connect_debug_port u_ila_0/probe26 [get_nets [list axis_mac0/m_axis_rx_tvalid]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe27]
-set_property port_width 16 [get_debug_ports u_ila_0/probe27]
-connect_debug_port u_ila_0/probe27 [get_nets [list {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[0]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[1]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[2]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[3]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[4]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[5]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[6]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[7]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[8]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[9]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[10]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[11]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[12]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[13]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[14]} {axis_mac0/mac_top0/mac_rx0/ip_total_data_length[15]}]]
+set_property port_width 1 [get_debug_ports u_ila_0/probe27]
+connect_debug_port u_ila_0/probe27 [get_nets [list axis_mac0/mac_top0/mac_tx0/mac_data_valid]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe28]
-set_property port_width 8 [get_debug_ports u_ila_0/probe28]
-connect_debug_port u_ila_0/probe28 [get_nets [list {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[0]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[1]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[2]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[3]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[4]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[5]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[6]} {axis_mac0/mac_top0/mac_rx0/mac_rx_datain[7]}]]
+set_property port_width 1 [get_debug_ports u_ila_0/probe28]
+connect_debug_port u_ila_0/probe28 [get_nets [list axis_mac0/mac_top0/mac_tx0/mac_send_end]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe29]
-set_property port_width 11 [get_debug_ports u_ila_0/probe29]
-connect_debug_port u_ila_0/probe29 [get_nets [list {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[0]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[1]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[2]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[3]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[4]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[5]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[6]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[7]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[8]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[9]} {axis_mac0/mac_top0/mac_rx0/udp0/ram_write_addr[10]}]]
+set_property port_width 1 [get_debug_ports u_ila_0/probe29]
+connect_debug_port u_ila_0/probe29 [get_nets [list axis_mac0/mac_top0/mac_rx0/udp0/ram_wr_en]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe30]
-set_property port_width 2 [get_debug_ports u_ila_0/probe30]
-connect_debug_port u_ila_0/probe30 [get_nets [list {test_state[0]} {test_state[1]}]]
+set_property port_width 1 [get_debug_ports u_ila_0/probe30]
+connect_debug_port u_ila_0/probe30 [get_nets [list axis_mac0/mac_top0/mac_tx0/ram_wr_en]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe31]
 set_property port_width 1 [get_debug_ports u_ila_0/probe31]
-connect_debug_port u_ila_0/probe31 [get_nets [list axis_mac0/mac_top0/mac_tx0/almost_full]]
+connect_debug_port u_ila_0/probe31 [get_nets [list req_ready]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe32]
 set_property port_width 1 [get_debug_ports u_ila_0/probe32]
-connect_debug_port u_ila_0/probe32 [get_nets [list axis_mac0/arp_found]]
+connect_debug_port u_ila_0/probe32 [get_nets [list axis_mac0/req_ready]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe33]
 set_property port_width 1 [get_debug_ports u_ila_0/probe33]
-connect_debug_port u_ila_0/probe33 [get_nets [list arbi_inst/rx_buffer_inst/e10_100_rx_dv]]
+connect_debug_port u_ila_0/probe33 [get_nets [list axis_mac0/s_axis_tx_tlast]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe34]
 set_property port_width 1 [get_debug_ports u_ila_0/probe34]
-connect_debug_port u_ila_0/probe34 [get_nets [list arbi_inst/e_rx_dv]]
+connect_debug_port u_ila_0/probe34 [get_nets [list axis_mac0/s_axis_tx_tready]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe35]
 set_property port_width 1 [get_debug_ports u_ila_0/probe35]
-connect_debug_port u_ila_0/probe35 [get_nets [list arbi_inst/e_tx_en]]
+connect_debug_port u_ila_0/probe35 [get_nets [list axis_mac0/s_axis_tx_tvalid]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe36]
 set_property port_width 1 [get_debug_ports u_ila_0/probe36]
-connect_debug_port u_ila_0/probe36 [get_nets [list arbi_inst/gmii_rx_dv]]
+connect_debug_port u_ila_0/probe36 [get_nets [list send_req]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe37]
 set_property port_width 1 [get_debug_ports u_ila_0/probe37]
-connect_debug_port u_ila_0/probe37 [get_nets [list arbi_inst/rx_buffer_inst/gmii_rx_dv_d0]]
+connect_debug_port u_ila_0/probe37 [get_nets [list axis_mac0/send_req]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe38]
 set_property port_width 1 [get_debug_ports u_ila_0/probe38]
-connect_debug_port u_ila_0/probe38 [get_nets [list arbi_inst/rx_buffer_inst/gmii_rx_dv_d1]]
+connect_debug_port u_ila_0/probe38 [get_nets [list axis_mac0/mac_top0/mac_tx0/udp_ram_data_req]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe39]
 set_property port_width 1 [get_debug_ports u_ila_0/probe39]
-connect_debug_port u_ila_0/probe39 [get_nets [list arbi_inst/gmii_tx_en]]
+connect_debug_port u_ila_0/probe39 [get_nets [list axis_mac0/mac_top0/mac_rx0/udp_rec_data_valid]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe40]
 set_property port_width 1 [get_debug_ports u_ila_0/probe40]
-connect_debug_port u_ila_0/probe40 [get_nets [list axis_mac0/m_axis_rx_tlast]]
+connect_debug_port u_ila_0/probe40 [get_nets [list axis_mac0/mac_top0/mac_tx0/udp_tx_end]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe41]
 set_property port_width 1 [get_debug_ports u_ila_0/probe41]
-connect_debug_port u_ila_0/probe41 [get_nets [list axis_mac0/m_axis_rx_tready]]
+connect_debug_port u_ila_0/probe41 [get_nets [list axis_mac0/mac_top0/mac_tx0/udp_tx_req]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe42]
 set_property port_width 1 [get_debug_ports u_ila_0/probe42]
-connect_debug_port u_ila_0/probe42 [get_nets [list axis_mac0/m_axis_rx_tvalid]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe43]
-set_property port_width 1 [get_debug_ports u_ila_0/probe43]
-connect_debug_port u_ila_0/probe43 [get_nets [list axis_mac0/mac_top0/mac_tx0/mac_data_valid]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe44]
-set_property port_width 1 [get_debug_ports u_ila_0/probe44]
-connect_debug_port u_ila_0/probe44 [get_nets [list axis_mac0/mac_top0/mac_tx0/mac_send_end]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe45]
-set_property port_width 1 [get_debug_ports u_ila_0/probe45]
-connect_debug_port u_ila_0/probe45 [get_nets [list axis_mac0/mac_top0/mac_rx0/udp0/ram_wr_en]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe46]
-set_property port_width 1 [get_debug_ports u_ila_0/probe46]
-connect_debug_port u_ila_0/probe46 [get_nets [list axis_mac0/mac_top0/mac_tx0/ram_wr_en]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe47]
-set_property port_width 1 [get_debug_ports u_ila_0/probe47]
-connect_debug_port u_ila_0/probe47 [get_nets [list req_ready]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe48]
-set_property port_width 1 [get_debug_ports u_ila_0/probe48]
-connect_debug_port u_ila_0/probe48 [get_nets [list axis_mac0/req_ready]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe49]
-set_property port_width 1 [get_debug_ports u_ila_0/probe49]
-connect_debug_port u_ila_0/probe49 [get_nets [list axis_mac0/s_axis_tx_tlast]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe50]
-set_property port_width 1 [get_debug_ports u_ila_0/probe50]
-connect_debug_port u_ila_0/probe50 [get_nets [list axis_mac0/s_axis_tx_tready]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe51]
-set_property port_width 1 [get_debug_ports u_ila_0/probe51]
-connect_debug_port u_ila_0/probe51 [get_nets [list axis_mac0/s_axis_tx_tvalid]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe52]
-set_property port_width 1 [get_debug_ports u_ila_0/probe52]
-connect_debug_port u_ila_0/probe52 [get_nets [list axis_mac0/send_req]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe53]
-set_property port_width 1 [get_debug_ports u_ila_0/probe53]
-connect_debug_port u_ila_0/probe53 [get_nets [list send_req]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe54]
-set_property port_width 1 [get_debug_ports u_ila_0/probe54]
-connect_debug_port u_ila_0/probe54 [get_nets [list arbi_inst/tx_buffer_inst/tx_rden]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe55]
-set_property port_width 1 [get_debug_ports u_ila_0/probe55]
-connect_debug_port u_ila_0/probe55 [get_nets [list arbi_inst/tx_buffer_inst/tx_wren]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe56]
-set_property port_width 1 [get_debug_ports u_ila_0/probe56]
-connect_debug_port u_ila_0/probe56 [get_nets [list axis_mac0/mac_top0/mac_tx0/udp_ram_data_req]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe57]
-set_property port_width 1 [get_debug_ports u_ila_0/probe57]
-connect_debug_port u_ila_0/probe57 [get_nets [list axis_mac0/mac_top0/mac_rx0/udp_rec_data_valid]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe58]
-set_property port_width 1 [get_debug_ports u_ila_0/probe58]
-connect_debug_port u_ila_0/probe58 [get_nets [list axis_mac0/mac_top0/mac_tx0/udp_tx_end]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe59]
-set_property port_width 1 [get_debug_ports u_ila_0/probe59]
-connect_debug_port u_ila_0/probe59 [get_nets [list axis_mac0/mac_top0/mac_tx0/udp_tx_req]]
-create_debug_port u_ila_0 probe
-set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe60]
-set_property port_width 1 [get_debug_ports u_ila_0/probe60]
-connect_debug_port u_ila_0/probe60 [get_nets [list axis_mac0/mac_top0/mac_tx0/upper_data_req]]
+connect_debug_port u_ila_0/probe42 [get_nets [list axis_mac0/mac_top0/mac_tx0/upper_data_req]]
 set_property C_CLK_INPUT_FREQ_HZ 300000000 [get_debug_cores dbg_hub]
 set_property C_ENABLE_CLK_DIVIDER false [get_debug_cores dbg_hub]
 set_property C_USER_SCAN_CHAIN 1 [get_debug_cores dbg_hub]
-connect_debug_port dbg_hub/clk [get_nets rgmii_rxc_IBUF_BUFG]
+connect_debug_port dbg_hub/clk [get_nets e_gtxc_OBUF_BUFG]

rtl/ethernet-udp/tests/eth_axis/ethernet_axis_echo.v

@@ -7,113 +7,63 @@
 
 module ethernet_axis_echo
 (
-    input               sys_clk_p,
-    input               sys_clk_n,
-    input               rst_n,
-    output [3:0]        led,
-    output              e_reset,
-    output              e_mdc,
-    inout               e_mdio,
-    output [3:0]        rgmii_txd,
-    output              rgmii_txctl,
-    output              rgmii_txc,
-    input  [3:0]        rgmii_rxd,
-    input               rgmii_rxctl,
-    input               rgmii_rxc
-);
+    input                  sys_clk_p,                    // system clock positive
+    input                  sys_clk_n,                    // system clock negative 
+    input                   rst_n,                       // reset ,low active
+    output [3:0]            led,                         // display network rate status
+    output                  e_reset,                     // phy reset
+    output                  e_mdc,                       // phy emdio clock
+    inout                   e_mdio,                      // phy emdio data
+    input	                e_rxc,                       // 125Mhz ethernet gmii rx clock
+    input                   e_rxdv,                      // GMII recieving data valid
+    input                   e_rxer,                      // GMII recieving data error                    
+    input [7:0]             e_rxd,                       // GMII recieving data          
 
-    // ------------------------------------------------------------
-    // Internal GMII-side signals
-    // ------------------------------------------------------------
-    wire  [7:0] gmii_txd;
-    wire        gmii_tx_en;
-    wire        gmii_tx_er;
-    wire        gmii_tx_clk;
-    wire        gmii_crs;
-    wire        gmii_col;
-    wire  [7:0] gmii_rxd_i;
-    wire        gmii_rx_dv;
-    wire        gmii_rx_er;
-    wire        gmii_rx_clk;
+    input                   e_txc,                       // 25Mhz ethernet mii tx clock         
+    output                  e_gtxc,                      // 125Mhz ethernet gmii tx clock  
+    output                  e_txen,                      // GMII sending data valid    
+    output                  e_txer,                      // GMII sending data error                   
+    output[7:0]             e_txd                        // GMII sending data 
+    );
+    wire                    sys_clk;                     //single end clock 
+    wire  [31:0]            pack_total_len ;             //package length
+    wire [1:0]              speed      ;                 //net speed select
+    wire                    link       ;                 //link status
+    wire                    erxdv    ;
+    wire [7:0]              erxd      ;
+    wire                    e_tx_en    ;
+    wire [7:0]              etxd      ;
+    wire                    e_rst_n    ;
+    assign e_gtxc = e_rxc;	 
+    assign e_reset = 1'b1; 
 
-    wire [31:0] pack_total_len;
+    // generate single end clock
 
-    wire        e_rx_dv;
-    wire [7:0]  e_rxd;
-    wire        e_tx_en;
-    wire [7:0]  e_txd;
-    wire        e_rst_n;
-    wire        sys_clk;
-
-    wire        duplex_mode;
-
-    assign duplex_mode = 1'b1;
-
-    // ------------------------------------------------------------
-    // System clock buffer
-    // ------------------------------------------------------------
     IBUFDS sys_clk_ibufgds
     (
-        .O  (sys_clk),
-        .I  (sys_clk_p),
-        .IB (sys_clk_n)
+    .O                      (sys_clk                 ),
+    .I                      (sys_clk_p               ),
+    .IB                     (sys_clk_n               )
     );
 
-    // ------------------------------------------------------------
-    // IDELAYCTRL
-    // ------------------------------------------------------------
-    (* IODELAY_GROUP = "rgmii_idelay_group" *)
-    IDELAYCTRL IDELAYCTRL_inst (
-        .RDY(),
-        .REFCLK(sys_clk),
-        .RST(1'b0)
-    );
 
-    // ------------------------------------------------------------
-    // GMII <-> RGMII conversion
-    // ------------------------------------------------------------
-    util_gmii_to_rgmii util_gmii_to_rgmii_m0
-    (
-        .reset           (1'b0),
-        .rgmii_td        (rgmii_txd),
-        .rgmii_tx_ctl    (rgmii_txctl),
-        .rgmii_txc       (rgmii_txc),
-        .rgmii_rd        (rgmii_rxd),
-        .rgmii_rx_ctl    (rgmii_rxctl),
-        .gmii_rx_clk     (gmii_rx_clk),
-        .gmii_txd        (e_txd),
-        .gmii_tx_en      (e_tx_en),
-        .gmii_tx_er      (1'b0),
-        .gmii_tx_clk     (gmii_tx_clk),
-        .gmii_crs        (gmii_crs),
-        .gmii_col        (gmii_col),
-        .gmii_rxd        (gmii_rxd_i),
-        .rgmii_rxc       (rgmii_rxc),
-        .gmii_rx_dv      (gmii_rx_dv),
-        .gmii_rx_er      (gmii_rx_er),
-        .speed_selection (2'b10),
-        .duplex_mode     (duplex_mode)
-    );
-
-    // ------------------------------------------------------------
-    // GMII arbitration / adaptation
-    // ------------------------------------------------------------
+    // Different conversion of GMII data according to different network speeds
     gmii_arbi arbi_inst
     (
-        .clk            (gmii_tx_clk),
-        .rst_n          (rst_n),
-        .speed          (2'b10),
-        .link           (1'b1),
-        .pack_total_len (pack_total_len),
-        .e_rst_n        (e_rst_n),
-        .gmii_rx_dv     (gmii_rx_dv),
-        .gmii_rxd       (gmii_rxd_i),
-        .gmii_tx_en     (gmii_tx_en),
-        .gmii_txd       (gmii_txd),
-        .e_rx_dv        (e_rx_dv),
-        .e_rxd          (e_rxd),
-        .e_tx_en        (e_tx_en),
-        .e_txd          (e_txd)
+    .clk                    (e_gtxc                 ),
+    .rst_n                  (rst_n                  ),
+    .speed                  (2'b10                  ),  
+    .link                   (1'b1                   ), 
+    .pack_total_len         (pack_total_len         ), 
+    .e_rst_n                (e_rst_n                ),
+    .gmii_rx_dv             (e_rxdv                 ),
+    .gmii_rxd               (e_rxd                  ),
+    .gmii_tx_en             (e_tx_en                ),
+    .gmii_txd               (etxd                   ), 
+    .e_rx_dv                (erxdv                  ),
+    .e_rxd                  (erxd                   ),
+    .e_tx_en                (e_txen                 ),
+    .e_txd                  (e_txd                  ) 
     );
 
     // ------------------------------------------------------------
@@ -139,14 +89,14 @@ module ethernet_axis_echo
     // ------------------------------------------------------------
     axis_mac axis_mac0
     (
-        .gmii_tx_clk       (gmii_tx_clk),
-        .gmii_rx_clk       (gmii_rx_clk),
+        .gmii_tx_clk       (e_gtxc),
+        .gmii_rx_clk       (e_rxc),
         .rst_n             (e_rst_n),
 
-        .gmii_rx_dv        (e_rx_dv),
-        .gmii_rxd          (e_rxd),
-        .gmii_tx_en        (gmii_tx_en),
-        .gmii_txd          (gmii_txd),
+        .gmii_rx_dv        (erxdv),
+        .gmii_rxd          (erxd),
+        .gmii_tx_en        (e_tx_en),
+        .gmii_txd          (etxd),
 
         .send_req          (send_req),
         .data_length       (data_length),
@@ -184,7 +134,7 @@ module ethernet_axis_echo
 
     assign tx_done_pulse_rx = tx_done_toggle_rx_d1 ^ tx_done_toggle_rx_d0;
 
-    always @(posedge gmii_rx_clk or negedge e_rst_n) begin
+    always @(posedge e_rxc or negedge e_rst_n) begin
         if (!e_rst_n) begin
             tx_done_toggle_rx_d0 <= 1'b0;
             tx_done_toggle_rx_d1 <= 1'b0;
@@ -194,7 +144,7 @@ module ethernet_axis_echo
         end
     end
 
-    always @(posedge gmii_rx_clk or negedge e_rst_n) begin
+    always @(posedge e_rxc or negedge e_rst_n) begin
         if (!e_rst_n) begin
             rx_wr_ptr        <= 16'd0;
             rx_pkt_len       <= 16'd0;
@@ -227,7 +177,7 @@ module ethernet_axis_echo
     // sync RX pendind to TX domain
     reg rx_pkt_pending_tx_d0, rx_pkt_pending_tx_d1;
 
-    always @(posedge gmii_tx_clk or negedge e_rst_n) begin
+    always @(posedge e_gtxc or negedge e_rst_n) begin
         if (!e_rst_n) begin
             rx_pkt_pending_tx_d0 <= 1'b0;
             rx_pkt_pending_tx_d1 <= 1'b0;
@@ -253,7 +203,7 @@ module ethernet_axis_echo
     reg [15:0] tx_pkt_len;
     reg [15:0] tx_rd_ptr;
 
-    always @(posedge gmii_tx_clk or negedge e_rst_n) begin
+    always @(posedge e_gtxc or negedge e_rst_n) begin
         if (!e_rst_n) begin
             test_state       <= TX_IDLE;
             tx_busy          <= 1'b0;

rtl/ethernet-udp/tests/eth_minimal/Makefile

@@ -7,7 +7,7 @@
 #
 
 # FPGA settings
-FPGA_PART = xc7a35tfgg484-1
+FPGA_PART = xc7a100tfgg484-2
 FPGA_TOP = ethernet_test_minimal
 FPGA_ARCH = artix7
 
@@ -23,7 +23,7 @@ SYN_FILES += $(sort $(shell find ../../src -type f \( -name '*.v' -o -name '*.sv
 XCI_FILES = $(sort $(shell find ../../src -type f -name '*.xci'))
 
 XDC_FILES += debug.xdc
-XDC_FILES += ../../../../constraints/ax7a035b.xdc
+XDC_FILES += ../../../../constraints/ax7102.xdc
 
 program: $(PROJECT).bit
 	echo "open_hw_manager" > program.tcl

rtl/ethernet-udp/tests/eth_minimal/debug.xdc

@@ -1,5 +1,8 @@
 # debug ILA
 
+connect_debug_port u_ila_0/clk [get_nets [list rgmii_rxc_IBUF_BUFG]]
+connect_debug_port dbg_hub/clk [get_nets rgmii_rxc_IBUF_BUFG]
+
 create_debug_core u_ila_0 ila
 set_property ALL_PROBE_SAME_MU true [get_debug_cores u_ila_0]
 set_property ALL_PROBE_SAME_MU_CNT 1 [get_debug_cores u_ila_0]
@@ -10,102 +13,102 @@ set_property C_INPUT_PIPE_STAGES 0 [get_debug_cores u_ila_0]
 set_property C_TRIGIN_EN false [get_debug_cores u_ila_0]
 set_property C_TRIGOUT_EN false [get_debug_cores u_ila_0]
 set_property port_width 1 [get_debug_ports u_ila_0/clk]
-connect_debug_port u_ila_0/clk [get_nets [list rgmii_rxc_IBUF_BUFG]]
+connect_debug_port u_ila_0/clk [get_nets [list e_gtxc_OBUF_BUFG]]
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe0]
-set_property port_width 9 [get_debug_ports u_ila_0/probe0]
-connect_debug_port u_ila_0/probe0 [get_nets [list {mac_test0/state[0]} {mac_test0/state[1]} {mac_test0/state[2]} {mac_test0/state[3]} {mac_test0/state[4]} {mac_test0/state[5]} {mac_test0/state[6]} {mac_test0/state[7]} {mac_test0/state[8]}]]
+set_property port_width 11 [get_debug_ports u_ila_0/probe0]
+connect_debug_port u_ila_0/probe0 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[0]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[1]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[2]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[3]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[4]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[5]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[6]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[7]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[8]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[9]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[10]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe1]
-set_property port_width 8 [get_debug_ports u_ila_0/probe1]
-connect_debug_port u_ila_0/probe1 [get_nets [list {arbi_inst/rx_buffer_inst/e10_100_rxd[0]} {arbi_inst/rx_buffer_inst/e10_100_rxd[1]} {arbi_inst/rx_buffer_inst/e10_100_rxd[2]} {arbi_inst/rx_buffer_inst/e10_100_rxd[3]} {arbi_inst/rx_buffer_inst/e10_100_rxd[4]} {arbi_inst/rx_buffer_inst/e10_100_rxd[5]} {arbi_inst/rx_buffer_inst/e10_100_rxd[6]} {arbi_inst/rx_buffer_inst/e10_100_rxd[7]}]]
+set_property port_width 4 [get_debug_ports u_ila_0/probe1]
+connect_debug_port u_ila_0/probe1 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp0/usedw[0]} {mac_test0/mac_top0/mac_tx0/udp0/usedw[1]} {mac_test0/mac_top0/mac_tx0/udp0/usedw[2]} {mac_test0/mac_top0/mac_tx0/udp0/usedw[3]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe2]
-set_property port_width 8 [get_debug_ports u_ila_0/probe2]
-connect_debug_port u_ila_0/probe2 [get_nets [list {arbi_inst/tx_buffer_inst/tx_wdata[0]} {arbi_inst/tx_buffer_inst/tx_wdata[1]} {arbi_inst/tx_buffer_inst/tx_wdata[2]} {arbi_inst/tx_buffer_inst/tx_wdata[3]} {arbi_inst/tx_buffer_inst/tx_wdata[4]} {arbi_inst/tx_buffer_inst/tx_wdata[5]} {arbi_inst/tx_buffer_inst/tx_wdata[6]} {arbi_inst/tx_buffer_inst/tx_wdata[7]}]]
+set_property port_width 6 [get_debug_ports u_ila_0/probe2]
+connect_debug_port u_ila_0/probe2 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp0/state[0]} {mac_test0/mac_top0/mac_tx0/udp0/state[1]} {mac_test0/mac_top0/mac_tx0/udp0/state[2]} {mac_test0/mac_top0/mac_tx0/udp0/state[3]} {mac_test0/mac_top0/mac_tx0/udp0/state[4]} {mac_test0/mac_top0/mac_tx0/udp0/state[5]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe3]
-set_property port_width 8 [get_debug_ports u_ila_0/probe3]
-connect_debug_port u_ila_0/probe3 [get_nets [list {arbi_inst/tx_buffer_inst/tx_rdata[0]} {arbi_inst/tx_buffer_inst/tx_rdata[1]} {arbi_inst/tx_buffer_inst/tx_rdata[2]} {arbi_inst/tx_buffer_inst/tx_rdata[3]} {arbi_inst/tx_buffer_inst/tx_rdata[4]} {arbi_inst/tx_buffer_inst/tx_rdata[5]} {arbi_inst/tx_buffer_inst/tx_rdata[6]} {arbi_inst/tx_buffer_inst/tx_rdata[7]}]]
+set_property port_width 9 [get_debug_ports u_ila_0/probe3]
+connect_debug_port u_ila_0/probe3 [get_nets [list {mac_test0/state[0]} {mac_test0/state[1]} {mac_test0/state[2]} {mac_test0/state[3]} {mac_test0/state[4]} {mac_test0/state[5]} {mac_test0/state[6]} {mac_test0/state[7]} {mac_test0/state[8]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe4]
 set_property port_width 16 [get_debug_ports u_ila_0/probe4]
-connect_debug_port u_ila_0/probe4 [get_nets [list {arbi_inst/tx_buffer_inst/tx_data_cnt[0]} {arbi_inst/tx_buffer_inst/tx_data_cnt[1]} {arbi_inst/tx_buffer_inst/tx_data_cnt[2]} {arbi_inst/tx_buffer_inst/tx_data_cnt[3]} {arbi_inst/tx_buffer_inst/tx_data_cnt[4]} {arbi_inst/tx_buffer_inst/tx_data_cnt[5]} {arbi_inst/tx_buffer_inst/tx_data_cnt[6]} {arbi_inst/tx_buffer_inst/tx_data_cnt[7]} {arbi_inst/tx_buffer_inst/tx_data_cnt[8]} {arbi_inst/tx_buffer_inst/tx_data_cnt[9]} {arbi_inst/tx_buffer_inst/tx_data_cnt[10]} {arbi_inst/tx_buffer_inst/tx_data_cnt[11]} {arbi_inst/tx_buffer_inst/tx_data_cnt[12]} {arbi_inst/tx_buffer_inst/tx_data_cnt[13]} {arbi_inst/tx_buffer_inst/tx_data_cnt[14]} {arbi_inst/tx_buffer_inst/tx_data_cnt[15]}]]
+connect_debug_port u_ila_0/probe4 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp_send_data_length[0]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[1]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[2]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[3]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[4]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[5]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[6]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[7]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[8]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[9]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[10]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[11]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[12]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[13]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[14]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe5]
-set_property port_width 16 [get_debug_ports u_ila_0/probe5]
-connect_debug_port u_ila_0/probe5 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp_send_data_length[0]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[1]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[2]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[3]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[4]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[5]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[6]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[7]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[8]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[9]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[10]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[11]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[12]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[13]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[14]} {mac_test0/mac_top0/mac_tx0/udp_send_data_length[15]}]]
+set_property port_width 12 [get_debug_ports u_ila_0/probe5]
+connect_debug_port u_ila_0/probe5 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[0]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[1]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[2]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[3]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[4]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[5]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[6]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[7]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[8]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[9]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[10]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[11]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe6]
-set_property port_width 12 [get_debug_ports u_ila_0/probe6]
-connect_debug_port u_ila_0/probe6 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[0]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[1]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[2]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[3]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[4]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[5]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[6]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[7]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[8]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[9]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[10]} {mac_test0/mac_top0/mac_tx0/udp_ram_data_count[11]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe6]
+connect_debug_port u_ila_0/probe6 [get_nets [list {mac_test0/mac_top0/mac_tx0/ram_wr_data[0]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[1]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[2]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[3]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[4]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[5]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[6]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe7]
 set_property port_width 8 [get_debug_ports u_ila_0/probe7]
-connect_debug_port u_ila_0/probe7 [get_nets [list {mac_test0/mac_top0/mac_tx0/ram_wr_data[0]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[1]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[2]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[3]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[4]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[5]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[6]} {mac_test0/mac_top0/mac_tx0/ram_wr_data[7]}]]
+connect_debug_port u_ila_0/probe7 [get_nets [list {mac_test0/mac_top0/mac_tx0/mac_tx_data[0]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[1]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[2]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[3]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[4]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[5]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[6]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe8]
-set_property port_width 8 [get_debug_ports u_ila_0/probe8]
-connect_debug_port u_ila_0/probe8 [get_nets [list {mac_test0/mac_top0/mac_tx0/mac_tx_data[0]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[1]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[2]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[3]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[4]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[5]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[6]} {mac_test0/mac_top0/mac_tx0/mac_tx_data[7]}]]
+set_property port_width 6 [get_debug_ports u_ila_0/probe8]
+connect_debug_port u_ila_0/probe8 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp0/ck_state[0]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[1]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[2]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[3]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[4]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[5]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe9]
-set_property port_width 4 [get_debug_ports u_ila_0/probe9]
-connect_debug_port u_ila_0/probe9 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp0/usedw[0]} {mac_test0/mac_top0/mac_tx0/udp0/usedw[1]} {mac_test0/mac_top0/mac_tx0/udp0/usedw[2]} {mac_test0/mac_top0/mac_tx0/udp0/usedw[3]}]]
+set_property port_width 16 [get_debug_ports u_ila_0/probe9]
+connect_debug_port u_ila_0/probe9 [get_nets [list {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[0]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[1]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[2]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[3]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[4]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[5]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[6]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[7]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[8]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[9]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[10]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[11]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[12]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[13]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[14]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe10]
-set_property port_width 6 [get_debug_ports u_ila_0/probe10]
-connect_debug_port u_ila_0/probe10 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp0/state[0]} {mac_test0/mac_top0/mac_tx0/udp0/state[1]} {mac_test0/mac_top0/mac_tx0/udp0/state[2]} {mac_test0/mac_top0/mac_tx0/udp0/state[3]} {mac_test0/mac_top0/mac_tx0/udp0/state[4]} {mac_test0/mac_top0/mac_tx0/udp0/state[5]}]]
+set_property port_width 11 [get_debug_ports u_ila_0/probe10]
+connect_debug_port u_ila_0/probe10 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[0]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[1]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[2]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[3]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[4]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[5]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[6]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[7]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[8]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[9]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[10]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe11]
-set_property port_width 6 [get_debug_ports u_ila_0/probe11]
-connect_debug_port u_ila_0/probe11 [get_nets [list {mac_test0/mac_top0/mac_tx0/udp0/ck_state[0]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[1]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[2]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[3]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[4]} {mac_test0/mac_top0/mac_tx0/udp0/ck_state[5]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe11]
+connect_debug_port u_ila_0/probe11 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[0]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[1]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[2]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[3]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[4]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[5]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[6]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe12]
 set_property port_width 16 [get_debug_ports u_ila_0/probe12]
-connect_debug_port u_ila_0/probe12 [get_nets [list {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[0]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[1]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[2]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[3]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[4]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[5]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[6]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[7]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[8]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[9]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[10]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[11]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[12]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[13]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[14]} {mac_test0/mac_top0/mac_rx0/upper_layer_data_length[15]}]]
+connect_debug_port u_ila_0/probe12 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[0]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[1]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[2]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[3]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[4]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[5]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[6]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[7]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[8]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[9]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[10]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[11]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[12]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[13]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[14]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe13]
-set_property port_width 11 [get_debug_ports u_ila_0/probe13]
-connect_debug_port u_ila_0/probe13 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[0]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[1]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[2]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[3]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[4]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[5]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[6]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[7]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[8]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[9]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_read_addr[10]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe13]
+connect_debug_port u_ila_0/probe13 [get_nets [list {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[0]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[1]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[2]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[3]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[4]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[5]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[6]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe14]
-set_property port_width 8 [get_debug_ports u_ila_0/probe14]
-connect_debug_port u_ila_0/probe14 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[0]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[1]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[2]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[3]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[4]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[5]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[6]} {mac_test0/mac_top0/mac_rx0/udp_rec_ram_rdata[7]}]]
+set_property port_width 16 [get_debug_ports u_ila_0/probe14]
+connect_debug_port u_ila_0/probe14 [get_nets [list {mac_test0/mac_top0/mac_rx0/ip_total_data_length[0]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[1]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[2]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[3]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[4]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[5]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[6]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[7]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[8]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[9]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[10]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[11]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[12]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[13]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[14]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe15]
-set_property port_width 16 [get_debug_ports u_ila_0/probe15]
-connect_debug_port u_ila_0/probe15 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[0]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[1]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[2]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[3]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[4]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[5]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[6]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[7]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[8]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[9]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[10]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[11]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[12]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[13]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[14]} {mac_test0/mac_top0/mac_rx0/udp_rec_data_length[15]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe15]
+connect_debug_port u_ila_0/probe15 [get_nets [list {mac_test0/mac_top0/mac_rx0/mac_rx_datain[0]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[1]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[2]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[3]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[4]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[5]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[6]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe16]
 set_property port_width 8 [get_debug_ports u_ila_0/probe16]
-connect_debug_port u_ila_0/probe16 [get_nets [list {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[0]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[1]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[2]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[3]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[4]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[5]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[6]} {mac_test0/mac_top0/mac_rx0/mac_rx_dataout[7]}]]
+connect_debug_port u_ila_0/probe16 [get_nets [list {arbi_inst/gmii_txd[0]} {arbi_inst/gmii_txd[1]} {arbi_inst/gmii_txd[2]} {arbi_inst/gmii_txd[3]} {arbi_inst/gmii_txd[4]} {arbi_inst/gmii_txd[5]} {arbi_inst/gmii_txd[6]} {arbi_inst/gmii_txd[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe17]
-set_property port_width 16 [get_debug_ports u_ila_0/probe17]
-connect_debug_port u_ila_0/probe17 [get_nets [list {mac_test0/mac_top0/mac_rx0/ip_total_data_length[0]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[1]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[2]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[3]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[4]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[5]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[6]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[7]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[8]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[9]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[10]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[11]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[12]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[13]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[14]} {mac_test0/mac_top0/mac_rx0/ip_total_data_length[15]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe17]
+connect_debug_port u_ila_0/probe17 [get_nets [list {arbi_inst/gmii_rxd[0]} {arbi_inst/gmii_rxd[1]} {arbi_inst/gmii_rxd[2]} {arbi_inst/gmii_rxd[3]} {arbi_inst/gmii_rxd[4]} {arbi_inst/gmii_rxd[5]} {arbi_inst/gmii_rxd[6]} {arbi_inst/gmii_rxd[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe18]
 set_property port_width 8 [get_debug_ports u_ila_0/probe18]
-connect_debug_port u_ila_0/probe18 [get_nets [list {mac_test0/mac_top0/mac_rx0/mac_rx_datain[0]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[1]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[2]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[3]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[4]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[5]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[6]} {mac_test0/mac_top0/mac_rx0/mac_rx_datain[7]}]]
+connect_debug_port u_ila_0/probe18 [get_nets [list {arbi_inst/e_txd[0]} {arbi_inst/e_txd[1]} {arbi_inst/e_txd[2]} {arbi_inst/e_txd[3]} {arbi_inst/e_txd[4]} {arbi_inst/e_txd[5]} {arbi_inst/e_txd[6]} {arbi_inst/e_txd[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe19]
-set_property port_width 11 [get_debug_ports u_ila_0/probe19]
-connect_debug_port u_ila_0/probe19 [get_nets [list {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[0]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[1]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[2]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[3]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[4]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[5]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[6]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[7]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[8]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[9]} {mac_test0/mac_top0/mac_rx0/udp0/ram_write_addr[10]}]]
+set_property port_width 8 [get_debug_ports u_ila_0/probe19]
+connect_debug_port u_ila_0/probe19 [get_nets [list {arbi_inst/e_rxd[0]} {arbi_inst/e_rxd[1]} {arbi_inst/e_rxd[2]} {arbi_inst/e_rxd[3]} {arbi_inst/e_rxd[4]} {arbi_inst/e_rxd[5]} {arbi_inst/e_rxd[6]} {arbi_inst/e_rxd[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe20]
 set_property port_width 8 [get_debug_ports u_ila_0/probe20]
-connect_debug_port u_ila_0/probe20 [get_nets [list {arbi_inst/gmii_txd[0]} {arbi_inst/gmii_txd[1]} {arbi_inst/gmii_txd[2]} {arbi_inst/gmii_txd[3]} {arbi_inst/gmii_txd[4]} {arbi_inst/gmii_txd[5]} {arbi_inst/gmii_txd[6]} {arbi_inst/gmii_txd[7]}]]
+connect_debug_port u_ila_0/probe20 [get_nets [list {arbi_inst/tx_buffer_inst/tx_wdata[0]} {arbi_inst/tx_buffer_inst/tx_wdata[1]} {arbi_inst/tx_buffer_inst/tx_wdata[2]} {arbi_inst/tx_buffer_inst/tx_wdata[3]} {arbi_inst/tx_buffer_inst/tx_wdata[4]} {arbi_inst/tx_buffer_inst/tx_wdata[5]} {arbi_inst/tx_buffer_inst/tx_wdata[6]} {arbi_inst/tx_buffer_inst/tx_wdata[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe21]
 set_property port_width 8 [get_debug_ports u_ila_0/probe21]
-connect_debug_port u_ila_0/probe21 [get_nets [list {arbi_inst/gmii_rxd[0]} {arbi_inst/gmii_rxd[1]} {arbi_inst/gmii_rxd[2]} {arbi_inst/gmii_rxd[3]} {arbi_inst/gmii_rxd[4]} {arbi_inst/gmii_rxd[5]} {arbi_inst/gmii_rxd[6]} {arbi_inst/gmii_rxd[7]}]]
+connect_debug_port u_ila_0/probe21 [get_nets [list {arbi_inst/tx_buffer_inst/tx_rdata[0]} {arbi_inst/tx_buffer_inst/tx_rdata[1]} {arbi_inst/tx_buffer_inst/tx_rdata[2]} {arbi_inst/tx_buffer_inst/tx_rdata[3]} {arbi_inst/tx_buffer_inst/tx_rdata[4]} {arbi_inst/tx_buffer_inst/tx_rdata[5]} {arbi_inst/tx_buffer_inst/tx_rdata[6]} {arbi_inst/tx_buffer_inst/tx_rdata[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe22]
-set_property port_width 8 [get_debug_ports u_ila_0/probe22]
-connect_debug_port u_ila_0/probe22 [get_nets [list {arbi_inst/e_txd[0]} {arbi_inst/e_txd[1]} {arbi_inst/e_txd[2]} {arbi_inst/e_txd[3]} {arbi_inst/e_txd[4]} {arbi_inst/e_txd[5]} {arbi_inst/e_txd[6]} {arbi_inst/e_txd[7]}]]
+set_property port_width 16 [get_debug_ports u_ila_0/probe22]
+connect_debug_port u_ila_0/probe22 [get_nets [list {arbi_inst/tx_buffer_inst/tx_data_cnt[0]} {arbi_inst/tx_buffer_inst/tx_data_cnt[1]} {arbi_inst/tx_buffer_inst/tx_data_cnt[2]} {arbi_inst/tx_buffer_inst/tx_data_cnt[3]} {arbi_inst/tx_buffer_inst/tx_data_cnt[4]} {arbi_inst/tx_buffer_inst/tx_data_cnt[5]} {arbi_inst/tx_buffer_inst/tx_data_cnt[6]} {arbi_inst/tx_buffer_inst/tx_data_cnt[7]} {arbi_inst/tx_buffer_inst/tx_data_cnt[8]} {arbi_inst/tx_buffer_inst/tx_data_cnt[9]} {arbi_inst/tx_buffer_inst/tx_data_cnt[10]} {arbi_inst/tx_buffer_inst/tx_data_cnt[11]} {arbi_inst/tx_buffer_inst/tx_data_cnt[12]} {arbi_inst/tx_buffer_inst/tx_data_cnt[13]} {arbi_inst/tx_buffer_inst/tx_data_cnt[14]} {arbi_inst/tx_buffer_inst/tx_data_cnt[15]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe23]
 set_property port_width 8 [get_debug_ports u_ila_0/probe23]
-connect_debug_port u_ila_0/probe23 [get_nets [list {arbi_inst/e_rxd[0]} {arbi_inst/e_rxd[1]} {arbi_inst/e_rxd[2]} {arbi_inst/e_rxd[3]} {arbi_inst/e_rxd[4]} {arbi_inst/e_rxd[5]} {arbi_inst/e_rxd[6]} {arbi_inst/e_rxd[7]}]]
+connect_debug_port u_ila_0/probe23 [get_nets [list {arbi_inst/rx_buffer_inst/e10_100_rxd[0]} {arbi_inst/rx_buffer_inst/e10_100_rxd[1]} {arbi_inst/rx_buffer_inst/e10_100_rxd[2]} {arbi_inst/rx_buffer_inst/e10_100_rxd[3]} {arbi_inst/rx_buffer_inst/e10_100_rxd[4]} {arbi_inst/rx_buffer_inst/e10_100_rxd[5]} {arbi_inst/rx_buffer_inst/e10_100_rxd[6]} {arbi_inst/rx_buffer_inst/e10_100_rxd[7]}]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe24]
 set_property port_width 1 [get_debug_ports u_ila_0/probe24]
@@ -149,11 +152,11 @@ connect_debug_port u_ila_0/probe33 [get_nets [list mac_test0/mac_top0/mac_tx0/ma
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe34]
 set_property port_width 1 [get_debug_ports u_ila_0/probe34]
-connect_debug_port u_ila_0/probe34 [get_nets [list mac_test0/mac_top0/mac_rx0/udp0/ram_wr_en]]
+connect_debug_port u_ila_0/probe34 [get_nets [list mac_test0/mac_top0/mac_tx0/ram_wr_en]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe35]
 set_property port_width 1 [get_debug_ports u_ila_0/probe35]
-connect_debug_port u_ila_0/probe35 [get_nets [list mac_test0/mac_top0/mac_tx0/ram_wr_en]]
+connect_debug_port u_ila_0/probe35 [get_nets [list mac_test0/mac_top0/mac_rx0/udp0/ram_wr_en]]
 create_debug_port u_ila_0 probe
 set_property PROBE_TYPE DATA_AND_TRIGGER [get_debug_ports u_ila_0/probe36]
 set_property port_width 1 [get_debug_ports u_ila_0/probe36]
@@ -185,4 +188,4 @@ connect_debug_port u_ila_0/probe42 [get_nets [list mac_test0/mac_top0/mac_tx0/up
 set_property C_CLK_INPUT_FREQ_HZ 300000000 [get_debug_cores dbg_hub]
 set_property C_ENABLE_CLK_DIVIDER false [get_debug_cores dbg_hub]
 set_property C_USER_SCAN_CHAIN 1 [get_debug_cores dbg_hub]
-connect_debug_port dbg_hub/clk [get_nets rgmii_rxc_IBUF_BUFG]
+connect_debug_port dbg_hub/clk [get_nets e_gtxc_OBUF_BUFG]

rtl/ethernet-udp/tests/eth_minimal/ethernet_test_minimal.v

@@ -1,134 +1,77 @@
-module ethernet_test_minimal
+`timescale 1ns / 1ps  
+//////////////////////////////////////////////////////////////////////////////////
+// Module Name:    ethernet_test 
+//////////////////////////////////////////////////////////////////////////////////
+module ethernet_test
 (
-input               sys_clk_p,                       //system clock positive
-input               sys_clk_n,                       //system clock negative 
-input               rst_n,                           //reset ,low active
-output [3:0]        led,                             //display network rate status
-output              e_reset,                         //phy reset
-output              e_mdc,                           //phy emdio clock
-inout               e_mdio,                          //phy emdio data
-output[3:0]         rgmii_txd,                       //phy data send
-output              rgmii_txctl,                     //phy data send control
-output              rgmii_txc,                       //Clock for sending data
-input[3:0]          rgmii_rxd,                       //recieve data
-input               rgmii_rxctl,                     //Control signal for receiving data
-input               rgmii_rxc                        //Clock for recieving data
+input                  sys_clk_p,                    // system clock positive
+input                  sys_clk_n,                    // system clock negative 
+input                   rst_n,                       // reset ,low active
+output [3:0]            led,                         // display network rate status
+output                  e_reset,                     // phy reset
+output                  e_mdc,                       // phy emdio clock
+inout                   e_mdio,                      // phy emdio data
+input	                e_rxc,                       // 125Mhz ethernet gmii rx clock
+input                   e_rxdv,                      // GMII recieving data valid
+input                   e_rxer,                      // GMII recieving data error                    
+input [7:0]             e_rxd,                       // GMII recieving data          
+
+input                   e_txc,                       // 25Mhz ethernet mii tx clock         
+output                  e_gtxc,                      // 125Mhz ethernet gmii tx clock  
+output                  e_txen,                      // GMII sending data valid    
+output                  e_txer,                      // GMII sending data error                   
+output[7:0]             e_txd                        // GMII sending data 
 );
-wire   [ 7:0]       gmii_txd;                       //gmii data                
-wire                gmii_tx_en;                     //gmii send enable
-wire                gmii_tx_er;
-wire                gmii_tx_clk;                    //gmii send clock
-wire                gmii_crs;
-wire                gmii_col;
-wire   [ 7:0]       gmii_rxd;                       //gmii recieving data                    
-wire                gmii_rx_dv;                     //gmii recieving data valid
-wire                gmii_rx_er;
-wire                gmii_rx_clk;                    //gmii recieve clock
-wire  [ 1:0]        speed_selection;                // 1x gigabit, 01 100Mbps, 00 10mbps
-wire                duplex_mode;                    // 1 full, 0 half
-wire                rgmii_rxcpll;
+wire                    sys_clk;                     //single end clock 
+wire  [31:0]            pack_total_len ;             //package length
+wire [1:0]              speed      ;                 //net speed select
+wire                    link       ;                 //link status
+wire                    erxdv    ;
+wire [7:0]              erxd      ;
+wire                    e_tx_en    ;
+wire [7:0]              etxd      ;
+wire                    e_rst_n    ;
+assign e_gtxc = e_rxc;	 
+assign e_reset = 1'b1; 
 
-wire  [31:0]        pack_total_len ;                //package length
+// generate single end clock
 
-wire [1:0]          speed      ;                    //net speed select
-wire                link       ;                    //link status
-wire                e_rx_dv    ;
-wire [7:0]          e_rxd      ;
-wire                e_tx_en    ;
-wire [7:0]          e_txd      ;
-wire                e_rst_n    ; 
-wire                sys_clk    ;
-
-
-assign duplex_mode = 1'b1;
-
-
-/*************************************************************************
-generate single end clock
-**************************************************************************/
 IBUFDS sys_clk_ibufgds
 (
-.O                              (sys_clk                 ),
-.I                              (sys_clk_p               ),
-.IB                             (sys_clk_n               )
-); 
-
-(* IODELAY_GROUP = "rgmii_idelay_group" *) // Specifies group name for associated IDELAYs/ODELAYs and IDELAYCTRL
-
-IDELAYCTRL IDELAYCTRL_inst (
-.RDY(),       // 1-bit output: Ready output
-.REFCLK(sys_clk), // 1-bit input: Reference clock input
-.RST(1'b0)        // 1-bit input: Active high reset input
-);
-/*************************************************************************
-GMII and RGMII data conversion
-****************************************************************************/
-util_gmii_to_rgmii util_gmii_to_rgmii_m0
-(
-.reset              (1'b0                   ),
-.rgmii_td           (rgmii_txd              ),
-.rgmii_tx_ctl       (rgmii_txctl            ),
-.rgmii_txc          (rgmii_txc              ),
-.rgmii_rd           (rgmii_rxd              ),
-.rgmii_rx_ctl       (rgmii_rxctl            ),
-.gmii_rx_clk        (gmii_rx_clk            ),
-.gmii_txd           (e_txd                  ),
-.gmii_tx_en         (e_tx_en                ),
-.gmii_tx_er         (1'b0                   ),
-.gmii_tx_clk        (gmii_tx_clk            ),
-.gmii_crs           (gmii_crs               ),
-.gmii_col           (gmii_col               ),
-.gmii_rxd           (gmii_rxd               ),
-.rgmii_rxc          (rgmii_rxc              ),//add
-.gmii_rx_dv         (gmii_rx_dv             ),
-.gmii_rx_er         (gmii_rx_er             ),
-.speed_selection    (2'b10                  ),
-.duplex_mode        (duplex_mode            )
-);
-/*************************************************************************
-Different conversion of GMII data according to different network speeds
-****************************************************************************/
-
-gmii_arbi arbi_inst
-(
-.clk                (gmii_tx_clk            ),
-.rst_n              (rst_n                  ),
-.speed              (2'b10                  ),  
-.link               (1'b1                  ), 
-.pack_total_len     (pack_total_len         ), 
-.e_rst_n            (e_rst_n                ),
-.gmii_rx_dv         (gmii_rx_dv             ),
-.gmii_rxd           (gmii_rxd               ),
-.gmii_tx_en         (gmii_tx_en             ),
-.gmii_txd           (gmii_txd               ), 
-.e_rx_dv            (e_rx_dv                ),
-.e_rxd              (e_rxd                  ),
-.e_tx_en            (e_tx_en                ),
-.e_txd              (e_txd                  ) 
+.O                      (sys_clk                 ),
+.I                      (sys_clk_p               ),
+.IB                     (sys_clk_n               )
 );
 
-
-/*************************************************************************
-Mac layer protocol test
-****************************************************************************/
+// Mac layer protocol test
 mac_test mac_test0
 (
-.gmii_tx_clk        (gmii_tx_clk            ),
-.gmii_rx_clk        (gmii_rx_clk            ) ,
-.rst_n              (e_rst_n                ),
-.pack_total_len     (pack_total_len         ),
-.gmii_rx_dv         (e_rx_dv                ),
-.gmii_rxd           (e_rxd                  ),
-.gmii_tx_en         (gmii_tx_en             ),
-.gmii_txd           (gmii_txd               )
+.gmii_tx_clk            (e_gtxc                 ),
+.gmii_rx_clk            (e_rxc                  ) ,
+.rst_n                  (e_rst_n                ),
+.pack_total_len         (pack_total_len         ),
+.gmii_rx_dv             (erxdv                  ),
+.gmii_rxd               (erxd                   ),
+.gmii_tx_en             (e_tx_en                ),
+.gmii_txd               (etxd                   )
 ); 
-/*************************************************************************
-Generate PHY reset signal
-****************************************************************************/
-reset reset_m0
+
+// Different conversion of GMII data according to different network speeds
+gmii_arbi arbi_inst
 (
-.clk                (sys_clk                ),
-.key1               (rst_n                  ),
-.rst_n              (e_reset                )
+.clk                    (e_gtxc                 ),
+.rst_n                  (rst_n                  ),
+.speed                  (2'b10                  ),  
+.link                   (1'b1                   ), 
+.pack_total_len         (pack_total_len         ), 
+.e_rst_n                (e_rst_n                ),
+.gmii_rx_dv             (e_rxdv                 ),
+.gmii_rxd               (e_rxd                  ),
+.gmii_tx_en             (e_tx_en                ),
+.gmii_txd               (etxd                   ), 
+.e_rx_dv                (erxdv                  ),
+.e_rxd                  (erxd                   ),
+.e_tx_en                (e_txen                 ),
+.e_txd                  (e_txd                  ) 
 );
 endmodule

rtl/generator/README.md

@@ -0,0 +1,91 @@
+# Генератор
+
+Модуль выполняет задачу формирования последовательности импульсов заданной амплитуды, длительности и периода.  
+Дополнительно реализован механизм синхронизации с модулем сэмплера через сигналы `sample_req` и `sample_done`, позволяющий запускать сбор данных для каждого импульса и ожидать подтверждения завершения выборки перед переходом к следующему импульсу.
+
+---
+
+## Список параметров
+
+### DATA_WIDTH
+Ширина выходных данных генератора.
+
+### ZERO_LEVEL
+Уровень сигнала в состоянии отсутствия импульса (базовый уровень сигнала).
+
+Типовые значения:
+
+- `8192` — середина диапазона ЦАП
+- `0` — нулевой уровень
+
+---
+
+## Список входных портов
+
+### clk_in
+Сигнал тактирования модуля.
+
+### rst
+Сброс модуля и остановка генерации.
+
+### start
+Сигнал запуска последовательности импульсов.
+
+При его активации модуль фиксирует все входные параметры и начинает генерацию.
+
+Повторный запуск во время активной генерации блокируется с помощью внутреннего сигнала `enable`.
+
+### [31:0] pulse_width
+Длительность активной части импульса (в тактах).
+
+### [31:0] pulse_period
+Полный период импульса (в тактах).
+
+### [DATA_WIDTH-1:0] pulse_height
+Амплитуда импульса.
+
+### [15:0] pulse_num
+Количество импульсов, которое необходимо сгенерировать.
+
+### sample_done
+Сигнал подтверждения от сэмплера о завершении выборки данных для текущего импульса.
+
+---
+
+## Список выходных портов
+
+pulse
+Выходной сигнал разрешения записи сигнала 
+
+[DATA_WIDTH-1:0] pulse_height_out
+Выходное значение амплитуды сигнала.
+
+Во время активной части импульса равно `pulse_height`, вне импульса — `ZERO_LEVEL`.
+
+sample_req
+Сигнал запроса на запуск выборки в модуле сэмплера.
+
+Поднимается в начале каждого нового импульса и снимается после получения `sample_done`.
+
+---
+
+## Логика работы
+
+После прихода сигнала `start` модуль:
+
+- фиксирует входные параметры генерации
+- сбрасывает внутренние счетчики
+- поднимает `enable = 1`
+- формирует первый `sample_req`
+
+После этого начинается последовательная генерация импульсов.
+
+---
+
+## Симуляция
+Тесты запускаются автоматически через make.
+```
+cd tests
+make sim
+```
+При успешном завершении теста высвечивается "ALL PASSED".

rtl/generator/src/generator.sv

@@ -3,7 +3,8 @@
 
 module generator
 #(
-    parameter DATA_WIDTH = 14
+    parameter DATA_WIDTH = 14,
+    parameter ZERO_LEVEL = 8192 // 8192 or 0
     )
 (
     input clk_in,
@@ -13,81 +14,82 @@ module generator
     input [31:0]           pulse_period,
     input [DATA_WIDTH-1:0] pulse_height,
     input [15:0]           pulse_num,
+    input sample_done,
     
     output pulse,
-    output[DATA_WIDTH-1:0] pulse_height_out
+    output[DATA_WIDTH-1:0] pulse_height_out,
+    output logic sample_req
     
     );
     
-    logic [DATA_WIDTH-1:0] pulse_height_reg, pulse_height_out_reg;
-    logic pulse_reg;
+  (* MARK_DEBUG="true" *)  logic [DATA_WIDTH-1:0] pulse_height_reg, pulse_height_out_reg;
     
-    logic [31:0] pulse_width_reg, pulse_period_reg;
-    logic [15:0] pulse_num_reg;
+  (* MARK_DEBUG="true" *)  logic [31:0] pulse_width_reg, pulse_period_reg;
+  (* MARK_DEBUG="true" *)  logic [15:0] pulse_num_reg;
     
-    logic enable;
-    logic [15:0] cnt_pulse_num;
-    logic [31:0] cnt_period;
-    
-    logic start_d;
-
-    always @(posedge clk_in) begin
-        start_d <= start;
-    end
-
-    wire start_pulse = start & ~start_d;
+  (* MARK_DEBUG="true" *)  logic enable;
+  (* MARK_DEBUG="true" *)  logic [15:0] cnt_pulse_num;
+  (* MARK_DEBUG="true" *)  logic [31:0] cnt_period;
 
     
     always @(posedge clk_in) begin
         if (rst) begin
-            pulse_reg <= '0;
-            pulse_height_reg <= 0;
-            pulse_height_out_reg <= '0;
-            
+            pulse_height_reg <= ZERO_LEVEL;
+            pulse_height_out_reg <= ZERO_LEVEL;
             pulse_width_reg <= '0;
             pulse_period_reg <= '0;
             pulse_num_reg <= '0;
             enable <= 0;
             cnt_pulse_num <= '0;
             cnt_period <= '0;
+            sample_req <= 0;
         end else begin
-            if (start) begin
+            if (start & !enable) begin
                 enable <= 1'b1;
-//                pulse_width_reg <= pulse_width;
-//                pulse_period_reg <= pulse_period;
-//                pulse_num_reg <= pulse_num;
-//                pulse_height_reg <= pulse_height;
-                
                 cnt_pulse_num <= '0;
                 cnt_period <= '0;
-            end
-            if (enable) begin
-                pulse_reg <= 1;
+
+                sample_req <= 1;
                 
                 pulse_width_reg <= pulse_width;
                 pulse_period_reg <= pulse_period;
                 pulse_num_reg <= pulse_num;
                 pulse_height_reg <= pulse_height;
-                
-                if (pulse_reg) begin
-                
-                if (cnt_period < pulse_width_reg) begin
-                    pulse_height_out_reg <= pulse_height_reg;
-                end else begin
-                    pulse_height_out_reg <= '0;
-                end
-                if (cnt_period == pulse_period_reg - 1) begin
-                    cnt_period <= 0;
-                    if (cnt_pulse_num == pulse_num_reg - 1) begin
-                        enable <= 0;
-                        pulse_reg <= 0;
-                    end else begin
-                        cnt_pulse_num <= cnt_pulse_num + 1;
+            end 
+            if (enable) begin
+
+                if (!sample_req && (cnt_period == 0)) begin
+                    pulse_height_out_reg <= ZERO_LEVEL;
+                    if (sample_done) begin
+                        sample_req <= 1'b0;
+                    end
+                    
+                    if (!sample_done) begin
+                        if (cnt_pulse_num == pulse_num_reg - 1) begin
+                            enable <= 1'b0;
+                        end
+                        else begin
+                            cnt_pulse_num <= cnt_pulse_num + 1;
+                            sample_req <= 1'b1;
+                            cnt_period <= 1;
+                        end
                     end
-                end else begin
-                    cnt_period <= cnt_period + 1;
                 end
-                
+                 else begin
+                        
+                    if (cnt_period <= pulse_width_reg) begin
+                        pulse_height_out_reg <= pulse_height_reg;
+                    end else begin
+                        pulse_height_out_reg <= ZERO_LEVEL;
+                    end
+                    if (cnt_period == pulse_period_reg) begin
+                        cnt_period <= 0;
+                    end else begin
+                        cnt_period <= cnt_period + 1;
+                    end
+                    if (sample_req && sample_done) begin
+                        sample_req <= 0;
+                    end
                 end
             end
         end

rtl/generator/tests/generator_tb.sv

@@ -3,6 +3,7 @@
 module generator_tb;
 
     parameter DATA_WIDTH = 14;
+    parameter ZERO_LEVEL = 8192;
     parameter CLK_PERIOD = 16;
 
     logic clk;
@@ -81,7 +82,7 @@ module generator_tb;
 
         repeat(40) @(posedge clk);
         
-         pulse_width  = 3;
+        pulse_width  = 3;
         pulse_period = 8;
         pulse_num    = 4;
         pulse_height = 14'h3FF;
@@ -89,9 +90,17 @@ module generator_tb;
 
        repeat(1) @(posedge clk);
         start = 0;
+        
+        repeat(5) @(posedge clk);
+        start = 1;
+        pulse_height = 14'h155;
 
+       repeat(1) @(posedge clk);
+        start = 0;
+        
         repeat(50) @(posedge clk);
 
+
         $display("\n=== TEST FINISHED ===");
         $finish;
     end

rtl/sampler/README.md

@@ -1,23 +1,139 @@
 # Сэмплер
-Модуль выполняет задачу сбора данных с выхода АЦП, их обработку, упаковку, и передачу дальше с помощью AXI Stream интерфейса.
 
-## Cписок параметров
-DATA_WIDTH - ширина входных данных, получаемых с АЦП.
-PACK_FACTOR - количество отсчетов, собираемых в один выходной пакет.
-PROCESS_MODE - режим интерпретации входного кода. 0 - прямой код, 1 - дополнительный код.
+Модуль выполняет задачу сбора данных с выхода АЦП, их обработки, упаковки и передачи дальше с помощью AXI Stream интерфейса.  
+Дополнительно реализован механизм синхронизации с внешним генератором через сигналы `sample_req` и `sample_done`, позволяющий запускать сбор строго по запросу и подтверждать завершение выборки.
+
+---
+
+## Список параметров
+
+DATA_WIDTH
+Ширина входных данных, получаемых с АЦП.
+
+PACK_FACTOR
+Количество отсчетов, собираемых в один выходной пакет.
+
+PROCESS_MODE
+Режим интерпретации входного кода:
+
+- `0` — прямой код
+- `1` — дополнительный код
+
+---
 
 ## Список входных портов
-clk_in - сигнал тактирования выходного интерфейса.
-rst - сброс модуля и остановка подачи импульсов.
-[DATA_WIDTH-1:0] data_in - входной сигнал с АЦП.
-out_of_range - флаг выхода значений данных за допустимый диапазон. 0 - валидны, 1 - не валидны.
+
+clk_in
+Сигнал тактирования выходного интерфейса.
+
+rst
+Сброс модуля и остановка работы.
+
+[DATA_WIDTH-1:0] data_in
+Входной сигнал с АЦП.
+
+out_of_range
+Флаг выхода значений данных за допустимый диапазон:
+
+- `0` — данные валидны
+- `1` — данные невалидны и игнорируются
+
+[31:0] smp_num
+Количество валидных отсчетов, которое необходимо собрать после получения запроса на выборку.
+
+sample_req
+Сигнал запроса на запуск выборки.  
+При его активации модуль начинает сбор данных и переходит в активное состояние (`enable = 1`).
+
+---
 
 ## Список выходных портов
-[DATA_WIDTH*PACK_FACTOR-1:0]  m_axis_tdata - урезанный axis формат, выходные данные. Ширина шины считается исходя из битности данных и фактора упаковки.
-m_axis_tvalid - урезанный axis формат, валидность выходных данных.
+
+[DATA_WIDTH*PACK_FACTOR-1:0] m_axis_tdata
+Урезанный AXI Stream формат, выходные данные.  
+Ширина шины определяется как произведение битности данных и фактора упаковки.
+
+m_axis_tvalid
+Урезанный AXI Stream формат, сигнал валидности выходных данных.  
+Формируется при готовности очередного пакета.
+
+sample_done
+Сигнал завершения выборки.  
+Поднимается после того, как модуль собрал количество валидных отсчетов, равное `smp_num`.
+
+---
 
 ## Логика работы
-На каждом такте принимаются data_in (значение АЦП) и out_of_range (флаг выхода значений данных за допустимый диапазон). Если out_of_range = 1, то данные игнорируются и не попадают во внутренний буффер. В противном случае, модуль накапливает данные во внутреннем буффере, идет его заполнение до количества данных, равное PACK_FACTOR. Когда буффер оказывается заполненным, он выдает пакет упакованных данных, сопровождая их импульсом m_axis_tvalid (готовность пакета). Если PROCESS_MODE = 1, данные выдаются в дополнительном коде, если PROCESS_MODE = 0 - в прямом.
+
+На каждом такте принимаются:
+
+- `data_in` — значение АЦП
+- `out_of_range` — флаг допустимости значения
+
+Если `out_of_range = 1`, данные считаются невалидными, игнорируются и не попадают во внутренний буфер.
+
+Если `out_of_range = 0`, данные считаются корректными и используются для дальнейшей обработки.
+
+---
+
+### Преобразование данных
+
+Если `PROCESS_MODE = 1`, входные данные интерпретируются как дополнительный код и преобразуются перед упаковкой.
+
+Если `PROCESS_MODE = 0`, данные передаются без преобразования (прямой код).
+
+---
+
+### Запуск выборки
+
+Сбор данных начинается только после прихода сигнала `sample_req`.
+
+При этом:
+
+- фиксируется значение `smp_num`
+- внутренний счетчик собранных отсчетов обнуляется
+- модуль переходит в активное состояние (`enable = 1`)
+
+Пока `enable = 1`, модуль принимает только валидные отсчеты и считает их.
+
+---
+
+### Упаковка данных
+
+Внутренний буфер заполняется до количества данных, равного `PACK_FACTOR`.
+
+#### Если `PACK_FACTOR = 1`
+
+Каждый валидный отсчет сразу формирует выходной пакет:
+
+- данные передаются в `m_axis_tdata`
+- формируется импульс `m_axis_tvalid`
+
+#### Если `PACK_FACTOR > 1`
+
+Данные последовательно накапливаются во внутреннем сдвиговом буфере.
+
+Когда буфер полностью заполнен:
+
+- формируется пакет упакованных данных
+- поднимается `m_axis_tvalid`
+
+После этого начинается сбор следующего пакета.
+
+---
+
+### Завершение выборки
+
+Когда количество собранных валидных отсчетов достигает значения `smp_num`:
+
+- поднимается сигнал `sample_done`
+- внутренние счетчики сбрасываются
+- буфер очищается
+- `enable` сбрасывается в `0`
+
+Это означает полное завершение текущего цикла выборки.
+
+---
 
 ## Симуляция
 Тесты запускаются автоматически через make.

rtl/sampler/src/sampler.sv

@@ -13,12 +13,17 @@ module sampler
     input rst,
     input [DATA_WIDTH-1:0] data_in,
     input out_of_range,
+    input [31:0] smp_num,
+    input sample_req,
 
     output logic [DATA_WIDTH*PACK_FACTOR-1:0]  m_axis_tdata,
-    output logic                              m_axis_tvalid
+    output logic                              m_axis_tvalid,
+    output logic sample_done
     );
-    logic [DATA_WIDTH-1:0] data_converted;
-    logic out_of_range_reg;
+   (* MARK_DEBUG="true" *) logic [DATA_WIDTH-1:0] data_converted;
+   (* MARK_DEBUG="true" *) logic out_of_range_reg;
+    (* MARK_DEBUG="true" *) logic [31:0] smp_num_reg, cnt_smp_num;
+   (* MARK_DEBUG="true" *) logic enable;
     
     generate
        if (PROCESS_MODE) begin 
@@ -50,8 +55,8 @@ module sampler
      end
     endgenerate
          
-    logic [DATA_WIDTH*PACK_FACTOR-1:0] buffer;
-    logic buffer_ready;
+  (* MARK_DEBUG="true" *)  logic [DATA_WIDTH*PACK_FACTOR-1:0] buffer;
+  (* MARK_DEBUG="true" *)  logic buffer_ready;
 
     logic [$clog2(PACK_FACTOR):0] cnt;
     
@@ -61,12 +66,36 @@ module sampler
             if (rst) begin
                 buffer       <= '0;
                 buffer_ready <= 0;
+                cnt_smp_num <= '0;
+                smp_num_reg <= '0;
+                enable <= '0;
+                sample_done <= 0;
             end
             else begin
                 buffer_ready <= 0;
-                if (!out_of_range_reg) begin
-                    buffer       <= data_converted;
-                    buffer_ready <= 1;
+                if (sample_done && !sample_req) begin
+                    sample_done <= 1'b0;
+                end
+                if (!enable && sample_req && !sample_done) begin
+                    enable      <= 1;
+                    cnt_smp_num <= 0;
+                    smp_num_reg <= smp_num;
+                end
+                if (enable) begin
+                    if (!out_of_range_reg) begin
+                        if (cnt_smp_num != smp_num_reg) begin
+                            buffer       <= data_converted;
+                            buffer_ready <= 1;
+                            cnt_smp_num <= cnt_smp_num +1;
+                        end 
+                        else begin
+                            cnt_smp_num <= '0;
+                            sample_done <= 1'b1;
+                            buffer_ready <= 0;
+                            buffer <= '0;
+                            enable <= 0;
+                        end
+                    end
                 end
             end
         end
@@ -76,18 +105,42 @@ module sampler
                 buffer <= '0;
                 cnt <= '0; //
                 buffer_ready <= 0;
+                cnt_smp_num <= '0;
+                smp_num_reg <= '0;
+                enable <= 0;
+                sample_done <= 0;
             end
             else begin
                 buffer_ready <= 0;
-                if (!out_of_range_reg) begin
-                    buffer <= {buffer[DATA_WIDTH*(PACK_FACTOR-1)-1:0], data_converted};
-                    if (cnt == PACK_FACTOR-1) begin
-                        cnt <= 0;
-                        buffer_ready <= 1;
-                        buffer <= {buffer[DATA_WIDTH*(PACK_FACTOR-1)-1:0], data_converted};
-                    end
-                    else begin
-                        cnt <= cnt + 1;
+                if (sample_done && !sample_req) begin
+                    sample_done <= 1'b0;
+                end
+                if (!enable && sample_req && !sample_done) begin
+                    enable      <= 1;
+                    cnt_smp_num <= 0;
+                    smp_num_reg <= smp_num;
+                end
+                if (enable) begin
+                    if (!out_of_range_reg) begin
+                        if (cnt_smp_num != smp_num_reg) begin
+                            cnt_smp_num <= cnt_smp_num +1;
+                            buffer <= {buffer[DATA_WIDTH*(PACK_FACTOR-1)-1:0], data_converted};
+                            if (cnt == PACK_FACTOR-1) begin
+                                cnt <= 0;
+                                buffer_ready <= 1;
+                                buffer <= {buffer[DATA_WIDTH*(PACK_FACTOR-1)-1:0], data_converted};
+                            end
+                            else begin
+                                cnt <= cnt + 1;
+                            end
+                        end 
+                        else begin
+                            sample_done <= 1'b1;
+                            cnt_smp_num <= '0;
+                            buffer_ready <= 0;
+                            buffer <= '0;
+                            enable <= 0;
+                        end
                     end
                 end
             end
@@ -95,28 +148,6 @@ module sampler
       end
     endgenerate
     
-//    always @(posedge clk_in) begin
-//        if (rst) begin
-//            buffer <= '0;
-//            cnt <= '0; //
-//            buffer_ready <= 0;
-//        end
-//        else begin
-//            buffer_ready <= 0;
-//            if (!out_of_range_reg) begin
-//                buffer <= {buffer[DATA_WIDTH*(PACK_FACTOR-1)-1:0], data_converted};
-//                if (cnt == PACK_FACTOR-1) begin
-//                    cnt <= 0;
-//                    buffer_ready <= 1;
-//                    buffer <= {buffer[DATA_WIDTH*(PACK_FACTOR-1)-1:0], data_converted};
-//                end
-//                else begin
-//                    cnt <= cnt + 1;
-//                end
-//            end
-//        end
-//    end
-    
     assign m_axis_tdata = buffer;
     assign m_axis_tvalid = buffer_ready;
     

scripts/build.sh

@@ -1 +0,0 @@
-# mock

scripts/questa.mk

@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: MIT
+###################################################################
+# Questa/ModelSim simulation helper
+#
+# Expected variables from the project Makefile:
+#   SYN_FILES    - RTL sources
+#   TB_FILES     - testbench sources
+#   INC_FILES    - include files, optional
+#   SIM_TOP      - simulation top module
+#   SIM_DEFS     - defines, optional
+#   SIM_RUNTIME  - run time, for example "10000 us" or "-all"
+#
+# Useful overrides:
+#   make sim-questa XILINX_VIVADO=/opt/Xilinx/Vivado/2024.2
+#   make sim-questa-gui
+###################################################################
+
+.PHONY: sim-questa sim-questa-gui questa-clean questa-xpm-clean
+
+VLIB ?= vlib
+VMAP ?= vmap
+VLOG ?= vlog
+VSIM ?= vsim
+
+QUESTA_WORK_LIB ?= work
+QUESTA_XPM_LIB  ?= xpm
+QUESTA_DIR      ?= questa_build
+QUESTA_TRANSCRIPT ?= transcript
+XILINX_VIVADO=/tools/Xilinx/2025.1/Vivado
+SIM_RUNTIME ?= 10000 us
+QUESTA_RUN ?= run $(SIM_RUNTIME)
+
+# XPM is needed by this design because accum.sv uses xpm_memory_sdpram and
+# out_axis_fifo.sv uses xpm_fifo_async. Point XILINX_VIVADO to your Vivado
+# install if it is not already exported by settings64.sh.
+QUESTA_USE_XPM ?= 1
+
+QUESTA_XPM_SRC = \
+	$(XILINX_VIVADO)/data/ip/xpm/xpm_cdc/hdl/xpm_cdc.sv \
+	$(XILINX_VIVADO)/data/ip/xpm/xpm_memory/hdl/xpm_memory.sv \
+	$(XILINX_VIVADO)/data/ip/xpm/xpm_fifo/hdl/xpm_fifo.sv
+
+QUESTA_GLBL_SRC = $(XILINX_VIVADO)/data/verilog/src/glbl.v
+
+QUESTA_DEFS = $(foreach d,$(SIM_DEFS),+define+$(d))
+QUESTA_INC_DIRS = $(sort $(dir $(SYN_FILES) $(TB_FILES) $(INC_FILES)))
+QUESTA_INCS = $(foreach d,$(QUESTA_INC_DIRS),+incdir+$(d))
+QUESTA_LIBS = $(if $(filter 1,$(QUESTA_USE_XPM)),-L $(QUESTA_XPM_LIB),)
+QUESTA_SOURCES = $(SYN_FILES) $(TB_FILES) $(if $(wildcard $(QUESTA_GLBL_SRC)),$(QUESTA_GLBL_SRC),)
+
+QUESTA_GLBL_TOP = $(if $(wildcard $(QUESTA_GLBL_SRC)),$(QUESTA_WORK_LIB).glbl,)
+
+
+$(QUESTA_DIR):
+	mkdir -p $@
+
+$(QUESTA_DIR)/sources.f: Makefile | $(QUESTA_DIR)
+	@rm -f $@
+	@for inc in $(QUESTA_INCS); do echo $$inc >> $@; done
+	@for src in $(QUESTA_SOURCES); do echo $$src >> $@; done
+
+$(QUESTA_DIR)/xpm.stamp: | $(QUESTA_DIR)
+	@if [ "$(QUESTA_USE_XPM)" = "1" ]; then \
+		if [ -z "$(XILINX_VIVADO)" ]; then \
+			echo "ERROR: XILINX_VIVADO is not set. Source Vivado settings64.sh or pass XILINX_VIVADO=/path/to/Vivado/<version>."; \
+			exit 1; \
+		fi; \
+		for src in $(QUESTA_XPM_SRC); do \
+			if [ ! -f $$src ]; then \
+				echo "ERROR: XPM source not found: $$src"; \
+				exit 1; \
+			fi; \
+		done; \
+		$(VLIB) $(QUESTA_XPM_LIB); \
+		$(VMAP) $(QUESTA_XPM_LIB) $(QUESTA_XPM_LIB); \
+		$(VLOG) -sv -work $(QUESTA_XPM_LIB) $(QUESTA_XPM_SRC); \
+	fi
+	@touch $@
+
+$(QUESTA_DIR)/compile.stamp: $(QUESTA_DIR)/sources.f $(SYN_FILES) $(TB_FILES) $(INC_FILES) $(QUESTA_DIR)/xpm.stamp
+	$(VLIB) $(QUESTA_WORK_LIB)
+	$(VMAP) $(QUESTA_WORK_LIB) $(QUESTA_WORK_LIB)
+	$(VLOG) -sv -work $(QUESTA_WORK_LIB) $(QUESTA_DEFS) -timescale 1ns/1ps $(QUESTA_INCS) -f $(QUESTA_DIR)/sources.f
+	@touch $@
+
+sim-questa: $(QUESTA_DIR)/compile.stamp
+	$(VSIM) -c $(QUESTA_LIBS) $(QUESTA_WORK_LIB).$(SIM_TOP) $(QUESTA_GLBL_TOP) -do "$(QUESTA_RUN); quit -f"
+
+sim-questa-gui: $(QUESTA_DIR)/compile.stamp
+	$(VSIM) $(QUESTA_LIBS) -voptargs="+acc" $(QUESTA_WORK_LIB).$(SIM_TOP) $(QUESTA_GLBL_TOP)
+
+questa-clean:
+	-rm -rf $(QUESTA_DIR) $(QUESTA_WORK_LIB) $(QUESTA_TRANSCRIPT) vsim.wlf *.wlf
+
+questa-xpm-clean: questa-clean
+	-rm -rf $(QUESTA_XPM_LIB)

scripts/vivado.mk

@@ -109,7 +109,27 @@ create_project.tcl: Makefile $(XCI_FILES) $(IP_TCL_FILES)
 	echo "add_files -fileset constrs_1 $(XDC_FILES)" >> $@
 	for x in $(XCI_FILES); do echo "import_ip $$x" >> $@; done
 	for x in $(IP_TCL_FILES); do echo "source $$x" >> $@; done
+
+	echo 'set ips [get_ips -quiet *]' >> $@
+	echo 'if {[llength $$ips] > 0} {' >> $@
+	echo '  puts "INFO: Checking IP status..."' >> $@
+	echo '  report_ip_status -file ip_status_before_upgrade.rpt' >> $@
+	echo '  set locked_ips [get_ips -quiet -filter {IS_LOCKED == 1}]' >> $@
+	echo '  if {[llength $$locked_ips] > 0} {' >> $@
+	echo '    puts "INFO: Upgrading locked IP cores: $$locked_ips"' >> $@
+	echo '    upgrade_ip $$locked_ips' >> $@
+	echo '  }' >> $@
+	echo '  set ip_files [get_files -quiet *.xci]' >> $@
+	echo '  if {[llength $$ip_files] > 0} {' >> $@
+	echo '    puts "INFO: Generating IP output products..."' >> $@
+	echo '    generate_target all $$ip_files' >> $@
+	echo '    export_ip_user_files -of_objects $$ip_files -no_script -sync -force -quiet' >> $@
+	echo '  }' >> $@
+	echo '  report_ip_status -file ip_status_after_upgrade.rpt' >> $@
+	echo '}' >> $@
+
 	for x in $(CONFIG_TCL_FILES); do echo "source $$x" >> $@; done
+	
 	if [ -n "$(TB_FILES)" ]; then \
 		echo "add_files -fileset sim_1 defines.v $(TB_FILES)" >> $@; \
 		echo "set_property top $(SIM_TOP) [get_filesets sim_1]" >> $@; \

software/README.md

@@ -0,0 +1,20 @@
+# Software
+
+Просто скрипт на питоне, для отправки команд через ethernet и для приема и простой визуализации данных.
+
+## Использование
+Справка:
+
+```python3 --help```
+
+Положительный импульс:
+
+```python3 console.py --pulse_width 3500 --pulse_period 20000 --pulse_height 15000 --pulse_num 550 --dac-bits 14```
+
+Отрицательный импульс:
+
+```python3 console.py --pulse_width 15000 --pulse_period 20000 --pulse_height 1500 --pulse_num 550 --dac-bits 14```
+
+## Ограничения
+Максимальный pulse_period считается как аппаратный N_MAX * WINDOW_SIZE * adc_dac_ratio, в базовой конфигурации это 512000. Максимальный pulse_num зависит от подаваемых значений и от битности аккумулятора (по умолчанию - 32), с учетом усреднений по WINDOW_SIZE это получается что-то около 2^14 накоплений.
+

software/console.py

@@ -1,5 +1,9 @@
 import argparse
 import socket
+import math
+import matplotlib.pyplot as plt
+
+adc_dac_ratio = 0.52
 
 
 def run_debug(args, sock):
@@ -22,12 +26,16 @@ def run_debug(args, sock):
 
 
 def format_ctrl_data(pulse_width: int, pulse_period: int,
-                     pulse_height: int, pulse_num: int, dac_bits: int = 16) -> bytes:
+                     pulse_height: int, pulse_num: int, args, dac_bits: int = 16) -> bytes:
     """Format data packet for set_data command."""
     output = bytearray()
 
     output += 0b10001000.to_bytes(1, 'little')
 
+    pulse_period_adc = (int(pulse_period * adc_dac_ratio) //
+                        args.window_size) * args.window_size
+    print(pulse_period_adc)
+
     # no negative please
     assert pulse_width > 0, "pulse_width should be positive"
     assert pulse_period > 0, "pulse_period should be positive"
@@ -44,8 +52,9 @@ def format_ctrl_data(pulse_width: int, pulse_period: int,
     output += pulse_period.to_bytes(4, 'little')
     output += pulse_num.to_bytes(2, 'little')
     output += pulse_height.to_bytes(2, 'little')
+    output += pulse_period_adc.to_bytes(4, 'little')
 
-    assert len(output) == 13, "Config data should be 96 bits + 8 bit header"
+    assert len(output) == 17, "Config data should be 128 bits + 8 bit header"
     return output
 
 
@@ -64,9 +73,53 @@ def verify_args(args):
         args.pulse_height = int(input("pulse_height: "))
 
 
+def recv_data(args, sock) -> list:
+    # calculate count & size
+    packet_count = math.ceil(
+        ((adc_dac_ratio * args.pulse_period) / args.window_size * args.data_width) / args.packet_size)
+    print(packet_count)
+
+    recv_buf = []
+
+    try:
+        for pkt_cnt in range(packet_count):
+            try:
+                data, address = sock.recvfrom(65536)
+
+                if len(data) % args.data_width != 0:
+                    print("invalid packet size!")
+
+                for i in range(0, len(data), args.data_width):
+                    sample = int.from_bytes(
+                        data[i:i+args.data_width], "little")
+                    recv_buf.append(sample)
+            except socket.timeout:
+                print("socket timeout")
+            except KeyboardInterrupt:
+                print(f"recv: {pkt_cnt}")
+                break
+    except Exception as e:
+        print(f"err: {e}")
+
+    expected_length = math.ceil(
+        adc_dac_ratio * args.pulse_period / args.window_size)
+    if len(recv_buf) < expected_length:
+        print("data underflow")
+        return []
+
+    recv_buf = recv_buf[:expected_length-1]
+    print(f"collected {len(recv_buf)} samples")
+    # print(recv_buf)
+    return recv_buf
+
+
 def run(args, sock):
     dest = (args.ip, args.send_port)
 
+    if args.pulse_period % args.window_size != 0:
+        print("Invalid pulse period (should be divisable by WINDOW_SIZE)")
+        return
+
     # reset
     sock.sendto(0x0f00.to_bytes(2), dest)
 
@@ -74,11 +127,15 @@ def run(args, sock):
     sock.sendto(format_ctrl_data(args.pulse_width,
                                  args.pulse_period,
                                  args.pulse_height,
-                                 args.pulse_num,
+                                 args.pulse_num, args,
                                  dac_bits=args.dac_bits), dest)
 
     sock.sendto(0xf000.to_bytes(2), dest)
     print("Sent start!")
+    data = recv_data(args, sock)
+    print(min(data), max(data))
+    plt.plot(data)
+    plt.show()
 
 
 def main():
@@ -101,6 +158,15 @@ def main():
     parser.add_argument("--dac-bits", type=int, default=12,
                         help="Битность ЦАП (влияет на максимальный pulse_height)")
 
+    parser.add_argument("--data-width", type=int,
+                        default=4, help="Байтность получаемых данных, по умолчанию 4 (AKA int32)")
+
+    parser.add_argument("--window-size", type=int,
+                        default=65, help="Размер окна для первого усреднения.")
+
+    parser.add_argument("--packet-size", type=int,
+                        default=1024, help="Размер отправляемых пакетов.")
+
     # передача параметров через аргументы
     for arg in ("pulse_width", "pulse_period", "pulse_num", "pulse_height"):
         parser.add_argument(f"--{arg}", type=int,
@@ -109,6 +175,8 @@ def main():
     args = parser.parse_args()
 
     sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
+    sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
+    sock.bind(("0.0.0.0", args.recv_port))
 
     if args.debug:
         run_debug(args, sock)

software/gui.py

@@ -0,0 +1,736 @@
+# shitpost
+
+import sys
+import math
+import socket
+import platform
+
+from PyQt6 import uic
+from dataclasses import dataclass
+from PyQt6.QtCore import QProcess, QTimer
+from PyQt6.QtCore import QObject, QThread, pyqtSignal
+
+from PyQt6.QtCore import Qt
+import pyqtgraph as pg
+from PyQt6.QtWidgets import QApplication, QMainWindow
+
+
+@dataclass
+class ReflectometerConfig:
+    ip: str
+    send_port: int
+    recv_port: int
+
+    dac_bits: int
+    data_width: int
+    window_size: int
+    packet_size: int
+
+    pulse_width: int
+    pulse_period: int
+    pulse_height: int
+    pulse_num: int
+
+    adc_dac_ratio: float = 0.52
+    socket_timeout_sec: float = 2.0
+
+
+class ReflectometerWorker(QObject):
+    data_ready = pyqtSignal(list)
+    status = pyqtSignal(str)
+    error = pyqtSignal(str)
+    finished = pyqtSignal()
+
+    def __init__(self, config: ReflectometerConfig):
+        super().__init__()
+        self.config = config
+        self._stop_requested = False
+        self._sock = None
+
+    def stop(self):
+        self._stop_requested = True
+
+        if self._sock is not None:
+            try:
+                self._sock.close()
+            except OSError:
+                pass
+
+    def run(self):
+        try:
+            self._validate_config()
+
+            self.status.emit("Открытие UDP-сокета...")
+
+            self._sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
+            self._sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
+            self._sock.settimeout(self.config.socket_timeout_sec)
+            self._sock.bind(("0.0.0.0", self.config.recv_port))
+
+            dest = (self.config.ip, self.config.send_port)
+
+            self.status.emit("Отправка soft reset...")
+            self._sock.sendto((0x0F00).to_bytes(2, "big"), dest)
+
+            self.status.emit("Отправка параметров...")
+            ctrl_data = self._format_ctrl_data()
+            self._sock.sendto(ctrl_data, dest)
+
+            self.status.emit("Отправка start...")
+            self._sock.sendto((0xF000).to_bytes(2, "big"), dest)
+
+            self.status.emit("Приём данных...")
+            data = self._recv_data()
+
+            if self._stop_requested:
+                self.status.emit("Операция остановлена")
+                return
+
+            self.data_ready.emit(data)
+            self.status.emit(f"Получено samples: {len(data)}")
+
+        except Exception as e:
+            if not self._stop_requested:
+                self.error.emit(str(e))
+
+        finally:
+            if self._sock is not None:
+                try:
+                    self._sock.close()
+                except OSError:
+                    pass
+
+            self.finished.emit()
+
+    def _format_ctrl_data(self) -> bytes:
+        output = bytearray()
+
+        output += 0b10001000.to_bytes(1, "little")
+
+        pulse_period_adc = (
+            int(self.config.pulse_period * self.config.adc_dac_ratio)
+            // self.config.window_size
+        ) * self.config.window_size
+
+        output += self.config.pulse_width.to_bytes(4, "little")
+        output += self.config.pulse_period.to_bytes(4, "little")
+        output += self.config.pulse_num.to_bytes(2, "little")
+        output += self.config.pulse_height.to_bytes(2, "little")
+        output += pulse_period_adc.to_bytes(4, "little")
+
+        if len(output) != 17:
+            raise ValueError("Config data should be 128 bits + 8 bit header")
+
+        return bytes(output)
+
+    def _recv_data(self) -> list[int]:
+        packet_count = math.ceil(
+            (
+                self.config.adc_dac_ratio
+                * self.config.pulse_period
+                / self.config.window_size
+                * self.config.data_width
+            )
+            / self.config.packet_size
+        )
+
+        expected_length = math.ceil(
+            self.config.adc_dac_ratio
+            * self.config.pulse_period
+            / self.config.window_size
+        )
+
+        recv_buf = []
+
+        for pkt_cnt in range(packet_count):
+            if self._stop_requested:
+                break
+
+            try:
+                packet, _ = self._sock.recvfrom(65536)
+            except socket.timeout:
+                raise TimeoutError(f"Таймаут приёма UDP-пакета #{pkt_cnt + 1}")
+
+            if len(packet) % self.config.data_width != 0:
+                raise ValueError(
+                    f"Некорректный размер UDP-пакета: {len(packet)} байт"
+                )
+
+            for i in range(0, len(packet), self.config.data_width):
+                sample = int.from_bytes(
+                    packet[i:i + self.config.data_width],
+                    "little",
+                )
+                recv_buf.append(sample)
+
+        if len(recv_buf) < expected_length:
+            raise ValueError(
+                f"Data underflow: получено {len(recv_buf)}, ожидалось {expected_length}"
+            )
+
+        return recv_buf[:expected_length - 1]
+
+    def _validate_config(self):
+        if self.config.pulse_period <= 0:
+            raise ValueError("pulse_period должен быть больше 0")
+
+        if self.config.pulse_num <= 0:
+            raise ValueError("pulse_num должен быть больше 0")
+
+        if self.config.window_size <= 0:
+            raise ValueError("window_size должен быть больше 0")
+
+        if self.config.packet_size <= 0:
+            raise ValueError("packet_size должен быть больше 0")
+
+        if self.config.data_width <= 0:
+            raise ValueError("data_width должен быть больше 0")
+
+        if self.config.pulse_period % self.config.window_size != 0:
+            raise ValueError("pulse_period должен быть кратен window_size")
+
+        if self.config.pulse_width >= 2**32 - 1:
+            raise ValueError("pulse_width слишком большой")
+
+        if self.config.pulse_period >= 2**32 - 1:
+            raise ValueError("pulse_period слишком большой")
+
+        if self.config.pulse_num >= 2**16 - 1:
+            raise ValueError("pulse_num слишком большой")
+
+        if self.config.pulse_height > 2**self.config.dac_bits - 1:
+            raise ValueError("pulse_height слишком большой")
+
+
+class MainWindow(QMainWindow):
+    def __init__(self):
+        super().__init__()
+
+        uic.loadUi("reflectometer.ui", self)
+
+        self.ping_process = None
+
+        self.ping_timeout_timer = QTimer(self)
+        self.ping_timeout_timer.setSingleShot(True)
+        self.ping_timeout_timer.timeout.connect(self.on_ping_timeout)
+
+        self.button_ping.clicked.connect(self.check_ping)
+
+        # settings
+        self.pulse_period = 0
+        self.pulse_height = 0
+        self.pulse_width = 0
+        self.pulse_num = 0
+
+        self.dac_dw = 14
+        self.adc_dw = 12
+        self.nmax = 4096
+        self.packet_size = 1024
+        self.window_size = 65
+        self.adc_dac_ration = 0.52
+        self.accum_width = 32
+
+        # setup
+
+        self.setup_pulse_controls()
+        self.setup_global_settings()
+
+        self.update_pulse_limits()
+
+        self.data = []
+
+        self.adc_dac_ratio = 0.52
+
+        self.measurement_thread = None
+        self.measurement_worker = None
+
+        self.setup_graph()
+        self.setup_network_settings()
+
+        self.button_start.clicked.connect(self.run_measurement)
+        self.button_graph_autoscale.clicked.connect(self.reset_graph_autoscale)
+
+    # ping utils
+
+    def check_ping(self):
+        ip = self.line_ip.text().strip()
+
+        if not ip:
+            self.label_ping_status.setText("set ip!!")
+            return
+
+        if "_" in self.line_ip.displayText():
+            self.label_ping_status.setText("IP invalid")
+            return
+
+        if self.ping_process is not None:
+            if self.ping_process.state() != QProcess.ProcessState.NotRunning:
+                self.label_ping_status.setText("Ping inflight")
+                return
+
+        self.label_ping_status.setText("ping...")
+        self.button_ping.setEnabled(False)
+
+        self.ping_process = QProcess(self)
+
+        self.ping_process.finished.connect(self.on_ping_finished)
+        self.ping_process.errorOccurred.connect(self.on_ping_error)
+
+        system_name = platform.system().lower()
+
+        if system_name == "windows":
+            program = "ping"
+            arguments = ["-n", "1", "-w", "2000", ip]
+        else:
+            program = "ping"
+            arguments = ["-c", "1", "-W", "2", ip]
+
+        self.ping_process.start(program, arguments)
+        # fallback
+        self.ping_timeout_timer.start(2000)
+
+    def on_ping_finished(self, exit_code, exit_status):
+        self.ping_timeout_timer.stop()
+        self.button_ping.setEnabled(True)
+
+        if exit_code == 0:
+            self.label_ping_status.setText("алё✅")
+        else:
+            self.label_ping_status.setText("не алё❌")
+
+    def on_ping_error(self):
+        self.ping_timeout_timer.stop()
+        self.button_ping.setEnabled(True)
+        self.label_ping_status.setText("ping unavail")
+
+    def on_ping_timeout(self):
+        if self.ping_process is not None:
+            if self.ping_process.state() != QProcess.ProcessState.NotRunning:
+                self.ping_process.kill()
+
+        self.button_ping.setEnabled(True)
+
+    # pulse controls
+    def setup_pulse_controls(self):
+        self._bind_slider_and_spinbox(
+            name="pulse_period",
+            slider=self.slider_pulse_period,
+            box=self.box_pulse_period,
+            normalize_value=self.normalize_pulse_period,
+        )
+
+        self._bind_slider_and_spinbox(
+            name="pulse_height",
+            slider=self.slider_pulse_height,
+            box=self.box_pulse_height,
+        )
+
+        self._bind_slider_and_spinbox(
+            name="pulse_width",
+            slider=self.slider_pulse_width,
+            box=self.box_pulse_width,
+        )
+
+        self._bind_slider_and_spinbox(
+            name="pulse_num",
+            slider=self.slider_pulse_num,
+            box=self.box_pulse_num,
+        )
+
+    def _bind_slider_and_spinbox(self, name, slider, box, normalize_value=None):
+        """
+        Связывает QSlider и QSpinBox по значению.
+        Значение автоматически записывается в self.<name>.
+        """
+
+        minimum = min(slider.minimum(), box.minimum())
+        maximum = max(slider.maximum(), box.maximum())
+
+        slider.setRange(minimum, maximum)
+        box.setRange(minimum, maximum)
+
+        def normalize(value):
+            if normalize_value is None:
+                return value
+
+            return normalize_value(value)
+
+        value = normalize(box.value())
+
+        slider.setValue(value)
+        box.setValue(value)
+        setattr(self, name, value)
+
+        def update_value(new_value):
+            new_value = normalize(new_value)
+
+            if slider.value() != new_value:
+                slider.setValue(new_value)
+
+            if box.value() != new_value:
+                box.setValue(new_value)
+
+            setattr(self, name, new_value)
+
+        slider.valueChanged.connect(update_value)
+        box.valueChanged.connect(update_value)
+
+    def normalize_pulse_period(self, value):
+        step = max(1, getattr(self, "window_size",
+                   self.box_window_size.value()))
+
+        snapped_value = round(value / step) * step
+
+        minimum = self.box_pulse_period.minimum()
+        maximum = self.box_pulse_period.maximum()
+
+        return max(minimum, min(snapped_value, maximum))
+
+    def _set_max_for_pair(self, slider, box, maximum):
+        slider.setMaximum(maximum)
+        box.setMaximum(maximum)
+
+        value = min(box.value(), maximum)
+        box.setValue(value)
+        slider.setValue(value)
+
+    def set_max_pulse_period(self, maximum):
+        self._set_max_for_pair(
+            slider=self.slider_pulse_period,
+            box=self.box_pulse_period,
+            maximum=maximum,
+        )
+        self.pulse_period = self.box_pulse_period.value()
+
+    def set_max_pulse_height(self, maximum):
+        self._set_max_for_pair(
+            slider=self.slider_pulse_height,
+            box=self.box_pulse_height,
+            maximum=maximum,
+        )
+        self.pulse_height = self.box_pulse_height.value()
+
+    def set_max_pulse_width(self, maximum):
+        self._set_max_for_pair(
+            slider=self.slider_pulse_width,
+            box=self.box_pulse_width,
+            maximum=maximum,
+        )
+        self.pulse_width = self.box_pulse_width.value()
+
+    def set_max_pulse_num(self, maximum):
+        self._set_max_for_pair(
+            slider=self.slider_pulse_num,
+            box=self.box_pulse_num,
+            maximum=maximum,
+        )
+        self.pulse_num = self.box_pulse_num.value()
+
+    # settings
+
+    def setup_global_settings(self):
+        self._bind_spinbox_setting(
+            name="dac_dw",
+            box=self.box_dac_dw,
+        )
+
+        self._bind_spinbox_setting(
+            name="adc_dw",
+            box=self.box_adc_dw,
+        )
+
+        self._bind_spinbox_setting(
+            name="nmax",
+            box=self.box_nmax,
+        )
+
+        self._bind_spinbox_setting(
+            name="window_size",
+            box=self.box_window_size,
+            after_change=self.on_window_size_changed,
+        )
+
+        self._bind_spinbox_setting(
+            name="packet_size",
+            box=self.box_packet_size,
+        )
+
+        self._bind_spinbox_setting(
+            name="adc_dac_ratio",
+            box=self.box_adc_dac_ratio,
+        )
+
+        self._bind_spinbox_setting(
+            name="accum_width",
+            box=self.box_accum_width,
+        )
+
+        self._bind_spinbox_setting(
+            name="recv_port",
+            box=self.box_recv_port,
+        )
+
+        self._bind_spinbox_setting(
+            name="send_port",
+            box=self.box_send_port,
+        )
+
+        # применяем шаг для pulse_period сразу при старте
+        self.update_pulse_period_step()
+
+    def _bind_spinbox_setting(self, name, box, after_change=None):
+        """
+        Связывает QSpinBox с полем self.<name>.
+        Например:
+        box_dac_dw -> self.dac_dw
+        box_window_size -> self.window_size
+        """
+
+        value = box.value()
+        setattr(self, name, value)
+
+        def on_value_changed(new_value):
+            setattr(self, name, new_value)
+
+            self.update_pulse_limits()
+
+            if after_change is not None:
+                after_change(new_value)
+
+        box.valueChanged.connect(on_value_changed)
+
+    def update_pulse_limits(self):
+        # re-calc limits
+
+        # nmax -> pulse_period limit
+        self.set_max_pulse_period(self.nmax * self.window_size)
+        self.set_max_pulse_width(self.nmax * self.window_size)
+        # accum_width + adc_width -> max pulse num
+
+        self.set_max_pulse_num(
+            2 ** (self.accum_width - self.adc_dw - math.ceil(math.log2(self.window_size))) - 1)
+        # dac_width -> max pulse height
+        self.set_max_pulse_height(2 ** self.dac_dw - 1)
+
+        self.slider_pulse_period.setMinimum(self.window_size)
+        self.box_pulse_period.setMinimum(self.window_size)
+
+    def on_window_size_changed(self, new_value):
+        self.update_pulse_period_step()
+
+    def update_pulse_period_step(self):
+        # set window_size step
+
+        step = max(1, self.window_size)
+
+        self.box_pulse_period.setSingleStep(step)
+        self.slider_pulse_period.setSingleStep(step)
+        self.slider_pulse_period.setPageStep(step)
+
+        self.snap_pulse_period_to_step(step)
+
+    def snap_pulse_period_to_step(self, step):
+        """
+        Подгоняет текущее значение pulse_period к ближайшему кратному window_size.
+
+        Это нужно потому, что QSlider при перетаскивании мышкой
+        всё равно может дать любое промежуточное значение.
+        """
+
+        current_value = self.box_pulse_period.value()
+
+        snapped_value = round(current_value / step) * step
+
+        minimum = self.box_pulse_period.minimum()
+        maximum = self.box_pulse_period.maximum()
+
+        snapped_value = max(minimum, min(snapped_value, maximum))
+
+        self.box_pulse_period.setValue(snapped_value)
+        self.slider_pulse_period.setValue(snapped_value)
+        self.pulse_period = snapped_value
+
+    # graph
+    def setup_graph(self):
+        self.graph_widget = pg.PlotWidget()
+        self.graph_widget.setLabel("left", "ADC value")
+        self.graph_widget.setLabel("bottom", "Sample")
+        self.graph_widget.showGrid(x=True, y=True)
+
+        self.graph_curve = self.graph_widget.plot(
+            [],
+            name="Data",
+        )
+
+        self.reference_curve = self.graph_widget.plot(
+            [],
+            name="Reference",
+        )
+
+        self.graph_layout.addWidget(self.graph_widget)
+        self.graph_curve = self.graph_widget.plot(
+            [], pen=pg.mkPen(width=2, color="b"))
+        self.reference_curve = self.graph_widget.plot(
+            [], pen=pg.mkPen(style=Qt.PenStyle.DashLine, color="g"))
+
+        self.checkbox_draw_reference.stateChanged.connect(
+            self.update_reference_graph)
+
+    def setup_network_settings(self):
+        self._bind_spinbox_setting(
+            name="recv_port",
+            box=self.box_recv_port,
+        )
+
+        self._bind_spinbox_setting(
+            name="send_port",
+            box=self.box_send_port,
+        )
+
+    def run_measurement(self):
+        if self.measurement_thread is not None:
+            if self.measurement_thread.isRunning():
+                self.set_measurement_status("Измерение выполняется")
+                return
+
+        config = self.build_reflectometer_config()
+
+        self.data = []
+        self.graph_curve.setData([])
+
+        self.measurement_thread = QThread(self)
+        self.measurement_worker = ReflectometerWorker(config)
+
+        self.measurement_worker.moveToThread(self.measurement_thread)
+
+        self.measurement_thread.started.connect(self.measurement_worker.run)
+
+        self.measurement_worker.status.connect(self.set_measurement_status)
+        self.measurement_worker.error.connect(self.on_measurement_error)
+        self.measurement_worker.data_ready.connect(self.on_data_received)
+
+        self.measurement_worker.finished.connect(self.measurement_thread.quit)
+        self.measurement_worker.finished.connect(
+            self.measurement_worker.deleteLater)
+
+        self.measurement_thread.finished.connect(
+            self.measurement_thread.deleteLater)
+        self.measurement_thread.finished.connect(self.on_measurement_finished)
+
+        self.measurement_thread.start()
+
+    def build_reflectometer_config(self) -> ReflectometerConfig:
+        ip = self.line_ip.text().strip()
+
+        if not ip:
+            raise ValueError("IP адрес не задан")
+
+        data_width = self.accum_width // 8
+
+        return ReflectometerConfig(
+            ip=ip,
+            send_port=self.send_port,
+            recv_port=self.recv_port,
+
+            dac_bits=self.dac_dw,
+            data_width=data_width,
+            window_size=self.window_size,
+            packet_size=self.packet_size,
+
+            pulse_width=self.pulse_width,
+            pulse_period=self.pulse_period,
+            pulse_height=self.pulse_height,
+            pulse_num=self.pulse_num,
+
+            adc_dac_ratio=self.adc_dac_ratio,
+        )
+
+    def on_data_received(self, data: list[int]):
+        self.data = data
+        # normalize
+        for i in range(len(data)):
+            self.data[i] /= (self.window_size * self.pulse_num)
+            self.data[i] -= 2 ** (self.adc_dw - 1) + 1
+
+        self.draw_main_graph()
+        self.update_reference_graph()
+
+        if data:
+            self.set_measurement_status(
+                f"Готово. smp: {len(data)}, min: {min(data)}, max: {max(data)}"
+            )
+        else:
+            self.set_measurement_status("Данные пустые")
+
+    def on_measurement_error(self, message: str):
+        self.set_measurement_status(f"Ошибка: {message}")
+
+    def on_measurement_finished(self):
+        self.measurement_worker = None
+        self.measurement_thread = None
+
+    def stop_measurement(self):
+        if self.measurement_worker is not None:
+            self.measurement_worker.stop()
+
+    def set_measurement_status(self, text: str):
+        self.label_status.setText(text)
+
+    def draw_main_graph(self):
+        if not self.data:
+            self.graph_curve.setData([])
+            return
+
+        x = list(range(len(self.data)))
+        self.graph_curve.setData(x, self.data)
+
+    def update_reference_graph(self):
+        """
+        Рисует или очищает эталонный график.
+        Вызывается после получения данных и при переключении checkbox_draw_reference.
+        """
+
+        if not self.checkbox_draw_reference.isChecked():
+            self.reference_curve.setData([])
+            return
+
+        if not self.data:
+            self.reference_curve.setData([])
+            return
+
+        reference_data = self.build_reference_data(len(self.data))
+
+        if not reference_data:
+            self.reference_curve.setData([])
+            return
+
+        x = list(range(len(reference_data)))
+        self.reference_curve.setData(x, reference_data)
+
+    def build_reference_data(self, length: int) -> list[int]:
+        reference = [0] * length
+
+        actual_pulse_width = round(
+            (self.pulse_width * self.adc_dac_ratio) / self.window_size)
+
+        reference[0:actual_pulse_width] = [
+            (self.pulse_height / 2 ** (self.dac_dw - self.adc_dw)) - 2 ** (self.adc_dw - 1), ] * (actual_pulse_width - 1)
+
+        return reference
+
+    def reset_graph_autoscale(self):
+        self.graph_widget.enableAutoRange(axis="xy", enable=True)
+        self.graph_widget.autoRange()
+
+
+def main():
+    app = QApplication(sys.argv)
+
+    window = MainWindow()
+    window.show()
+
+    sys.exit(app.exec())
+
+
+if __name__ == "__main__":
+    main()

software/reflectometer.ui

@@ -0,0 +1,505 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<ui version="4.0">
+ <class>MainWindow</class>
+ <widget class="QMainWindow" name="MainWindow">
+  <property name="geometry">
+   <rect>
+    <x>0</x>
+    <y>0</y>
+    <width>1023</width>
+    <height>708</height>
+   </rect>
+  </property>
+  <property name="windowTitle">
+   <string>Reflectometer PREMIUM</string>
+  </property>
+  <widget class="QWidget" name="centralwidget">
+   <layout class="QHBoxLayout" name="horizontalLayout" stretch="4,2">
+    <item>
+     <layout class="QVBoxLayout" name="graph_layout"/>
+    </item>
+    <item>
+     <layout class="QVBoxLayout" name="settings_layout">
+      <item>
+       <widget class="QTabWidget" name="tabWidget">
+        <property name="currentIndex">
+         <number>1</number>
+        </property>
+        <widget class="QWidget" name="tab">
+         <attribute name="title">
+          <string>Настройки</string>
+         </attribute>
+         <layout class="QVBoxLayout" name="verticalLayout_2">
+          <item>
+           <widget class="QScrollArea" name="scrollArea">
+            <property name="widgetResizable">
+             <bool>true</bool>
+            </property>
+            <widget class="QWidget" name="scrollAreaWidgetContents">
+             <property name="geometry">
+              <rect>
+               <x>0</x>
+               <y>0</y>
+               <width>294</width>
+               <height>621</height>
+              </rect>
+             </property>
+             <layout class="QVBoxLayout" name="verticalLayout">
+              <item>
+               <widget class="QLabel" name="label_2">
+                <property name="font">
+                 <font>
+                  <pointsize>12</pointsize>
+                 </font>
+                </property>
+                <property name="text">
+                 <string>Аппаратные параметры</string>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QSpinBox" name="box_dac_dw">
+                <property name="suffix">
+                 <string> bits</string>
+                </property>
+                <property name="prefix">
+                 <string>DAC data width: </string>
+                </property>
+                <property name="minimum">
+                 <number>8</number>
+                </property>
+                <property name="maximum">
+                 <number>32</number>
+                </property>
+                <property name="value">
+                 <number>14</number>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QSpinBox" name="box_adc_dw">
+                <property name="suffix">
+                 <string> bits</string>
+                </property>
+                <property name="prefix">
+                 <string>ADC data width: </string>
+                </property>
+                <property name="minimum">
+                 <number>8</number>
+                </property>
+                <property name="maximum">
+                 <number>32</number>
+                </property>
+                <property name="value">
+                 <number>12</number>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QSpinBox" name="box_accum_width">
+                <property name="suffix">
+                 <string> bits</string>
+                </property>
+                <property name="prefix">
+                 <string>Accum width: </string>
+                </property>
+                <property name="minimum">
+                 <number>16</number>
+                </property>
+                <property name="maximum">
+                 <number>64</number>
+                </property>
+                <property name="singleStep">
+                 <number>8</number>
+                </property>
+                <property name="value">
+                 <number>32</number>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QDoubleSpinBox" name="box_adc_dac_ratio">
+                <property name="prefix">
+                 <string>ADC:DAC clk ratio: </string>
+                </property>
+                <property name="minimum">
+                 <double>0.200000000000000</double>
+                </property>
+                <property name="maximum">
+                 <double>3.000000000000000</double>
+                </property>
+                <property name="singleStep">
+                 <double>0.010000000000000</double>
+                </property>
+                <property name="value">
+                 <double>0.520000000000000</double>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QSpinBox" name="box_nmax">
+                <property name="prefix">
+                 <string>N Max: </string>
+                </property>
+                <property name="minimum">
+                 <number>512</number>
+                </property>
+                <property name="maximum">
+                 <number>65536</number>
+                </property>
+                <property name="value">
+                 <number>4096</number>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QSpinBox" name="box_window_size">
+                <property name="prefix">
+                 <string>Window size: </string>
+                </property>
+                <property name="minimum">
+                 <number>1</number>
+                </property>
+                <property name="maximum">
+                 <number>1024</number>
+                </property>
+                <property name="value">
+                 <number>65</number>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QSpinBox" name="box_packet_size">
+                <property name="suffix">
+                 <string> bytes</string>
+                </property>
+                <property name="prefix">
+                 <string>Packet size: </string>
+                </property>
+                <property name="minimum">
+                 <number>1</number>
+                </property>
+                <property name="maximum">
+                 <number>1572</number>
+                </property>
+                <property name="value">
+                 <number>1024</number>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="Line" name="line_2">
+                <property name="orientation">
+                 <enum>Qt::Orientation::Horizontal</enum>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QLabel" name="label">
+                <property name="font">
+                 <font>
+                  <pointsize>12</pointsize>
+                 </font>
+                </property>
+                <property name="text">
+                 <string>Подключение</string>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QLabel" name="label_3">
+                <property name="text">
+                 <string>IP устройства:</string>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QLineEdit" name="line_ip">
+                <property name="inputMask">
+                 <string>999.999.999.999</string>
+                </property>
+                <property name="text">
+                 <string>192.168.0.2</string>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QLabel" name="label_4">
+                <property name="text">
+                 <string>Порт отправки:</string>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QSpinBox" name="box_send_port">
+                <property name="minimum">
+                 <number>80</number>
+                </property>
+                <property name="maximum">
+                 <number>65536</number>
+                </property>
+                <property name="value">
+                 <number>8080</number>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QLabel" name="label_5">
+                <property name="text">
+                 <string>Порт приёма:</string>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QSpinBox" name="box_recv_port">
+                <property name="minimum">
+                 <number>80</number>
+                </property>
+                <property name="maximum">
+                 <number>65536</number>
+                </property>
+                <property name="value">
+                 <number>8080</number>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QLabel" name="label_6">
+                <property name="font">
+                 <font>
+                  <pointsize>12</pointsize>
+                 </font>
+                </property>
+                <property name="text">
+                 <string>Тест</string>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QPushButton" name="button_ping">
+                <property name="text">
+                 <string>алё</string>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <widget class="QLabel" name="label_ping_status">
+                <property name="text">
+                 <string>...</string>
+                </property>
+                <property name="alignment">
+                 <set>Qt::AlignmentFlag::AlignCenter</set>
+                </property>
+               </widget>
+              </item>
+              <item>
+               <spacer name="verticalSpacer">
+                <property name="orientation">
+                 <enum>Qt::Orientation::Vertical</enum>
+                </property>
+                <property name="sizeHint" stdset="0">
+                 <size>
+                  <width>20</width>
+                  <height>40</height>
+                 </size>
+                </property>
+               </spacer>
+              </item>
+             </layout>
+            </widget>
+           </widget>
+          </item>
+         </layout>
+        </widget>
+        <widget class="QWidget" name="tab_2">
+         <attribute name="title">
+          <string>Управление</string>
+         </attribute>
+         <layout class="QVBoxLayout" name="verticalLayout_3">
+          <item>
+           <widget class="QLabel" name="label_7">
+            <property name="font">
+             <font>
+              <pointsize>12</pointsize>
+             </font>
+            </property>
+            <property name="text">
+             <string>Импульс</string>
+            </property>
+           </widget>
+          </item>
+          <item>
+           <layout class="QHBoxLayout" name="horizontalLayout_2" stretch="1,1,2">
+            <item>
+             <widget class="QLabel" name="label_8">
+              <property name="text">
+               <string>Период</string>
+              </property>
+             </widget>
+            </item>
+            <item>
+             <widget class="QSpinBox" name="box_pulse_period">
+              <property name="minimum">
+               <number>1</number>
+              </property>
+             </widget>
+            </item>
+            <item>
+             <widget class="QSlider" name="slider_pulse_period">
+              <property name="orientation">
+               <enum>Qt::Orientation::Horizontal</enum>
+              </property>
+             </widget>
+            </item>
+           </layout>
+          </item>
+          <item>
+           <layout class="QHBoxLayout" name="horizontalLayout_3" stretch="1,1,2">
+            <item>
+             <widget class="QLabel" name="label_9">
+              <property name="text">
+               <string>Ширина</string>
+              </property>
+             </widget>
+            </item>
+            <item>
+             <widget class="QSpinBox" name="box_pulse_width"/>
+            </item>
+            <item>
+             <widget class="QSlider" name="slider_pulse_width">
+              <property name="orientation">
+               <enum>Qt::Orientation::Horizontal</enum>
+              </property>
+             </widget>
+            </item>
+           </layout>
+          </item>
+          <item>
+           <layout class="QHBoxLayout" name="horizontalLayout_4" stretch="1,1,2">
+            <item>
+             <widget class="QLabel" name="label_10">
+              <property name="text">
+               <string>Высота</string>
+              </property>
+             </widget>
+            </item>
+            <item>
+             <widget class="QSpinBox" name="box_pulse_height"/>
+            </item>
+            <item>
+             <widget class="QSlider" name="slider_pulse_height">
+              <property name="orientation">
+               <enum>Qt::Orientation::Horizontal</enum>
+              </property>
+             </widget>
+            </item>
+           </layout>
+          </item>
+          <item>
+           <layout class="QHBoxLayout" name="horizontalLayout_5" stretch="1,1,2">
+            <item>
+             <widget class="QLabel" name="label_11">
+              <property name="text">
+               <string>Количество</string>
+              </property>
+             </widget>
+            </item>
+            <item>
+             <widget class="QSpinBox" name="box_pulse_num">
+              <property name="minimum">
+               <number>1</number>
+              </property>
+             </widget>
+            </item>
+            <item>
+             <widget class="QSlider" name="slider_pulse_num">
+              <property name="minimum">
+               <number>1</number>
+              </property>
+              <property name="orientation">
+               <enum>Qt::Orientation::Horizontal</enum>
+              </property>
+             </widget>
+            </item>
+           </layout>
+          </item>
+          <item>
+           <widget class="QPushButton" name="button_start">
+            <property name="text">
+             <string>start!</string>
+            </property>
+           </widget>
+          </item>
+          <item>
+           <layout class="QHBoxLayout" name="horizontalLayout_6" stretch="1,3">
+            <item>
+             <widget class="QLabel" name="label_13">
+              <property name="font">
+               <font>
+                <bold>true</bold>
+               </font>
+              </property>
+              <property name="text">
+               <string>Статус:</string>
+              </property>
+             </widget>
+            </item>
+            <item>
+             <widget class="QLabel" name="label_status">
+              <property name="text">
+               <string>-</string>
+              </property>
+             </widget>
+            </item>
+           </layout>
+          </item>
+          <item>
+           <widget class="QCheckBox" name="checkbox_draw_reference">
+            <property name="text">
+             <string>Отрисовка эталона</string>
+            </property>
+           </widget>
+          </item>
+          <item>
+           <spacer name="verticalSpacer_2">
+            <property name="orientation">
+             <enum>Qt::Orientation::Vertical</enum>
+            </property>
+            <property name="sizeHint" stdset="0">
+             <size>
+              <width>20</width>
+              <height>40</height>
+             </size>
+            </property>
+           </spacer>
+          </item>
+          <item>
+           <widget class="QPushButton" name="button_graph_autoscale">
+            <property name="text">
+             <string>Сброс масштаба</string>
+            </property>
+           </widget>
+          </item>
+         </layout>
+        </widget>
+       </widget>
+      </item>
+     </layout>
+    </item>
+   </layout>
+  </widget>
+  <widget class="QMenuBar" name="menubar">
+   <property name="geometry">
+    <rect>
+     <x>0</x>
+     <y>0</y>
+     <width>1023</width>
+     <height>30</height>
+    </rect>
+   </property>
+  </widget>
+  <widget class="QStatusBar" name="statusbar"/>
+ </widget>
+ <resources/>
+ <connections/>
+</ui>