baulin.fa/reflectometer_fpga_project
1
0
Fork 0
Code Issues 1 Pull Requests Actions Packages Projects Releases Wiki Activity

rtl: update reflectometer top design

Browse Source
This commit is contained in:
Phil
2026-04-30 13:10:41 +03:00
parent 9fd311d671
commit 179347659b
1 changed files with 33 additions and 53 deletions
Download Patch File Download Diff File Expand all files Collapse all files

84
designs/reflectometer/reflectometer.sv
View File

@ -29,18 +29,18 @@ module reflectometer_top #(
// DAC // DAC
(* MARK_DEBUG="true" *) output debug_dac (* MARK_DEBUG="true" *) output debug_dac,
// ADC // ADC
output ch2_clk,
input [ADC_DATA_WIDTH-1:0] adc_data_in; (* MARK_DEBUG="true" *) input [ADC_DATA_WIDTH-1:0] ch2_data,
input adc_out_of_range; input ch2_otr
); );
// temp // temp
wire p2_clk;
wire p2_wrt; wire p2_wrt;
(* MARK_DEBUG="true" *) wire [13:0] p2_data; wire [13:0] p2_data;
assign debug_dac = p2_data[13]; assign debug_dac = p2_data[13];
// ------------------------------------------------------------------------- // -------------------------------------------------------------------------
// Internal GMII-side signals // Internal GMII-side signals
@ -158,32 +158,19 @@ module reflectometer_top #(
// RX stream from Ethernet goes into controller // RX stream from Ethernet goes into controller
// TX stream is unused for now // TX stream is unused for now
// ------------------------------------------------------------------------- // -------------------------------------------------------------------------
wire req_ready; (* MARK_DEBUG="true" *) logic req_ready;
(* MARK_DEBUG="true" *) logic send_req;
reg send_req; (* MARK_DEBUG="true" *) logic [7:0] s_axis_tx_tdata;
reg [15:0] data_length; (* MARK_DEBUG="true" *) logic s_axis_tx_tvalid;
(* MARK_DEBUG="true" *) logic s_axis_tx_tready;
reg [7:0] s_axis_tx_tdata; (* MARK_DEBUG="true" *) logic s_axis_tx_tlast;
reg s_axis_tx_tvalid;
wire s_axis_tx_tready;
reg s_axis_tx_tlast;
(* MARK_DEBUG="true" *) wire [7:0] m_axis_rx_tdata; (* MARK_DEBUG="true" *) wire [7:0] m_axis_rx_tdata;
(* MARK_DEBUG="true" *) wire m_axis_rx_tvalid; (* MARK_DEBUG="true" *) wire m_axis_rx_tvalid;
(* MARK_DEBUG="true" *) wire m_axis_rx_tlast; (* MARK_DEBUG="true" *) wire m_axis_rx_tlast;
(* MARK_DEBUG="true" *) wire m_axis_rx_tready; (* MARK_DEBUG="true" *) wire m_axis_rx_tready;
// Always ready to accept RX payload bytes
assign m_axis_rx_tready = 1'b1;
// TX disabled
always @(*) begin
send_req = 1'b0;
data_length = 16'd0;
s_axis_tx_tdata = 8'd0;
s_axis_tx_tvalid= 1'b0;
s_axis_tx_tlast = 1'b0;
end
axis_mac axis_mac0 ( axis_mac axis_mac0 (
.gmii_tx_clk (gmii_tx_clk), .gmii_tx_clk (gmii_tx_clk),
@ -196,7 +183,7 @@ module reflectometer_top #(
.gmii_txd (gmii_txd), .gmii_txd (gmii_txd),
.send_req (send_req), .send_req (send_req),
.data_length (data_length), .data_length (PACKET_SIZE),
.req_ready (req_ready), .req_ready (req_ready),
.s_axis_tx_tdata (s_axis_tx_tdata), .s_axis_tx_tdata (s_axis_tx_tdata),
@ -227,14 +214,7 @@ module reflectometer_top #(
// ------------------------------------------------------------------------- // -------------------------------------------------------------------------
wire ctrl_rst_n = rst_n & clk_wiz_locked; wire ctrl_rst_n = rst_n & clk_wiz_locked;
// -------------------------------------------------------------------------
// Debug finish generator (still used here, since generator doesn't have finish signal)
//
// After each adc_start pulse generates one finish pulse after some delay.
// This is just for first bring-up so the controller can leave busy state
// If you don't want this, replace with:
// wire finish_dbg = 1'b0;
// -------------------------------------------------------------------------
(* MARK_DEBUG="true" *) logic finish; (* MARK_DEBUG="true" *) logic finish;
// Controller outputs to debug // Controller outputs to debug
@ -266,7 +246,7 @@ module reflectometer_top #(
.s_axis_tdata (m_axis_rx_tdata), .s_axis_tdata (m_axis_rx_tdata),
.s_axis_tvalid (m_axis_rx_tvalid), .s_axis_tvalid (m_axis_rx_tvalid),
.s_axis_tready (), // controller internally always ready in current version .s_axis_tready (m_axis_rx_tready),
.s_axis_tlast (m_axis_rx_tlast), .s_axis_tlast (m_axis_rx_tlast),
.finish (finish), .finish (finish),
@ -303,16 +283,16 @@ module reflectometer_top #(
.pulse_height_out(p2_data) .pulse_height_out(p2_data)
); );
// dac clk mgt // adc clk mgt
wire p2_clk_oddr; wire ch2_clk_oddr;
ODDR #( ODDR #(
.DDR_CLK_EDGE("SAME_EDGE"), .DDR_CLK_EDGE("SAME_EDGE"),
.INIT(1'b0), .INIT(1'b0),
.SRTYPE("SYNC") .SRTYPE("SYNC")
) ODDR_p2_clk ( ) ODDR_ch2_clk (
.Q (p2_clk_oddr), .Q (ch2_clk_oddr),
.C (dac_clk), .C (adc_clk),
.CE(1'b1), .CE(1'b1),
.D1(1'b1), .D1(1'b1),
.D2(1'b0), .D2(1'b0),
@ -320,17 +300,17 @@ module reflectometer_top #(
.S (1'b0) .S (1'b0)
); );
OBUF OBUF_p2_clk ( OBUF OBUF_ch2_clk (
.I(p2_clk_oddr), .I(ch2_clk_oddr),
.O(p2_clk) .O(ch2_clk)
); );
// ------------------------------------------------------------------------- // -------------------------------------------------------------------------
// ADC // ADC
// ------------------------------------------------------------------------- // -------------------------------------------------------------------------
logic [DATA_WIDTH*PACK_FACTOR-1:0] accum_m_axis_tdata; (* MARK_DEBUG="true" *) logic [ADC_DATA_WIDTH*PACK_FACTOR-1:0] accum_m_axis_tdata;
logic acum_m_axis_tvalid; (* MARK_DEBUG="true" *) logic acum_m_axis_tvalid;
sampler sampler
#( #(
@ -342,8 +322,8 @@ module reflectometer_top #(
( (
.clk_in(adc_clk), .clk_in(adc_clk),
.rst(adc_rst), .rst(adc_rst),
.data_in(adc_data_in), .data_in(ch2_data),
.out_of_range(adc_out_of_range), .out_of_range(ch2_otr),
.m_axis_tdata(accum_m_axis_tdata), .m_axis_tdata(accum_m_axis_tdata),
.m_axis_tvalid(acum_m_axis_tvalid) .m_axis_tvalid(acum_m_axis_tvalid)
); );
@ -370,13 +350,13 @@ module reflectometer_top #(
.smp_num(adc_pulse_period), .smp_num(adc_pulse_period),
.seq_num(adc_pulse_num), .seq_num(adc_pulse_num),
.eth_clk_in(gmii_rx_clk), .eth_clk_in(gmii_tx_clk),
.req_ready(req_ready), .req_ready(req_ready),
.send_req(send_req), .send_req(send_req),
.m_axis_tdata(m_axis_rx_tdata), .m_axis_tdata(s_axis_tx_tdata),
.m_axis_tvalid(m_axis_rx_tvalid), .m_axis_tvalid(s_axis_tx_tvalid),
.m_axis_tready(m_axis_rx_tready), .m_axis_tready(s_axis_tx_tready),
.m_axis_tlast(m_axis_rx_tlast), .m_axis_tlast(s_axis_tx_tlast),
.finish(finish) .finish(finish)
); );