reflectometer_fpga_project/rtl/sampler/tests/sampler_tb.sv

`timescale 1ns / 1ps

module sampler_tb;

    localparam DATA_WIDTH   = 12;
    localparam PACK_FACTOR  = 7;
    localparam PROCESS_MODE = 0;
    localparam CLK_PERIOD   = 15.3846;
    localparam OTR_OFFSET   = 0;

    logic clk;
    logic rst_dut;
    logic rst_gen;

    wire [DATA_WIDTH-1:0] data_in;
    wire out_of_range;

    logic [31:0] smp_num;

    logic done;
    logic request;

    logic [DATA_WIDTH*PACK_FACTOR-1:0] m_axis_tdata;
    logic m_axis_tvalid;

    sampler #(
        .DATA_WIDTH  (DATA_WIDTH),
        .PACK_FACTOR (PACK_FACTOR),
        .PROCESS_MODE(PROCESS_MODE)
    ) dut (
        .clk_in       (clk),
        .rst          (rst_dut),

        .data_in      (data_in),
        .out_of_range (out_of_range),

        .smp_num      (smp_num),
        .done         (done),

        .m_axis_tdata (m_axis_tdata),
        .m_axis_tvalid(m_axis_tvalid),

        .request      (request)
    );

    // =====================================================
    // CLOCK
    // =====================================================
    initial begin
        clk = 0;
        forever #(CLK_PERIOD/2) clk = ~clk;
    end

    // =====================================================
    // RESET
    // =====================================================
    task automatic reset_dut();
        @(posedge clk);
        rst_dut = 1;
        @(posedge clk);
        rst_dut = 0;
    endtask

    // =====================================================
    // FEED DATA
    // =====================================================
    triangle_wave_gen #(
        .DATA_WIDTH(DATA_WIDTH),
        .OFFSET(OTR_OFFSET), // offset of bits from '0 and '1 for OTR
        .STEP(1) // LSB bit per clock
    ) signal_gen (
        .clk(clk),
        .rst(rst_gen),
        .signal(data_in),
        .otr(out_of_range)
    );

    // =====================================================
    // TEST TASKS
    // =====================================================
    task automatic run_test_case(
        input int sample_num
    );
        logic [DATA_WIDTH-1:0] input_values[$];
        logic [DATA_WIDTH-1:0] output_values[$];
        bit flag;

        // Startup sequence
        rst_gen <= 1;
        smp_num <= sample_num;
        request <= 1;
        @(posedge clk);
        
        // syncronize
        while (!done)
            @(posedge clk);
        request <= 0;
        
        // Wait for sync and start signal generator
        // while (!dut.synced)
        //     @(posedge clk);
        wait(dut.synced === 1);
        rst_gen <= 0;

        // Wait for valid data
        fork
            begin : stat_mon_proc
                forever begin
                    @(posedge clk);
                    input_values.push_back(data_in);
                    if (m_axis_tvalid) begin
                        for (int i = 0; i < PACK_FACTOR; i++)
                            output_values.push_back(m_axis_tdata[DATA_WIDTH*i +: DATA_WIDTH]);
                    end
                end
            end
        join_none

        // Wait until end
        // while (dut.synced)
        //     @(posedge clk);
        wait(dut.synced === 0);

        disable stat_mon_proc;
        // Pop last input value. Signal is ahead of tdata for 1 cycle
        input_values.pop_back();

        // check data
        if (input_values.size() != output_values.size()) begin
            $display("[ERROR] -run_test_case- Input queue size don't equal to output queue size: %0d vs %0d", input_values.size(), output_values.size());
            $finish;
        end
        flag = 0;
        for (int i = 0; i < input_values.size(); i++) begin
            $write(" %0d", input_values[i]);
            if (input_values[i] != output_values[i])
                flag = 1;
        end
        $write("\n");
        for (int i = 0; i < input_values.size(); i++) begin
            $write(" %0d", output_values[i]);
        end
        $write("\n");
        $display("Total: %0d", output_values.size());
        if (flag) $display("FUCK");
        else $display("SUCKASS");

    endtask

    // =====================================================
    // MAIN
    // =====================================================
    initial begin

        $display("\n=== BASIC TEST ===");

        rst_dut = 1;
        rst_gen = 1;
        smp_num = 0;
        repeat(2) @(posedge clk);
        rst_dut = 0;
        repeat(2) @(posedge clk);

        run_test_case(100);


        $display("\n=== RANDOM STRESS TEST ===");
        // todo

        $display("\n=== TEST FINISHED ===");
        $finish;

    end

endmodule

module triangle_wave_gen #(
        parameter DATA_WIDTH = 12,
        parameter OFFSET = 100, // offset of bits from '0 and '1 for OTR
        parameter STEP = 1 // LSB bit per clock
    ) (
        input clk,
        input rst,
        output logic [DATA_WIDTH-1:0] signal,
        output logic otr
    );
    logic [DATA_WIDTH:0] counter;
    logic direction;

    initial begin
        counter = '0;
        direction = 1;
    end

    assign signal = counter > (2**DATA_WIDTH-1) ? (2**DATA_WIDTH-1) : counter;

    always_comb begin
        if (signal < OFFSET || (2**DATA_WIDTH - signal) <= OFFSET)
            otr <= 1;
        else
            otr <= 0;
    end

    always @(posedge clk) begin
        if (rst) begin
            counter = 0;
            direction = 1;
        end else begin
            if (direction)
                counter += STEP;
            else
                counter -= STEP;

            if (counter >= 2**DATA_WIDTH-1 || counter <= 0)
                direction <= ~direction;
        end
    end
endmodule