rtl: update accum_top to use dynamic window_size

rtl/accum/src/accum_top.sv

@@ -5,7 +5,6 @@ module accumulator_top
     parameter DATA_WIDTH = 12,
     parameter ACCUM_WIDTH = 32,
     parameter N_MAX = 4096,
-    parameter WINDOW_SIZE = 65,
     parameter PACKET_SIZE = 1024,
     parameter READ_BATCH_SIZE =(PACKET_SIZE*8)/(ACCUM_WIDTH)
     )
@@ -22,6 +21,7 @@ module accumulator_top
     input start,
     input [31:0] smp_num,
     input [15:0] seq_num,
+    input [31:0] window_size,
 
     // eth signals
     input eth_clk_in,
@@ -42,36 +42,66 @@ module accumulator_top
     wire readout_begin;
     wire batch_req;
 
+    logic finish_int;
+    logic finish_int_d;
+    logic finish_pulse;
+    logic calc_active;
+    logic start_accept;
+    logic [31:0] window_size_reg;
+
+    wire [31:0] window_size_safe = (window_size == 32'd0) ? 32'd1 : window_size;
+
+    assign finish_pulse = finish_int && !finish_int_d;
+    assign start_accept = start && !calc_active;
+    assign finish = finish_int;
+
+    // Keep the top copy stable for blocks that start later than the accum itself
+    always_ff @(posedge clk_in) begin
+        if (rst) begin
+            calc_active     <= 1'b0;
+            finish_int_d    <= 1'b0;
+            window_size_reg <= 32'd1;
+        end else begin
+            finish_int_d <= finish_int;
+
+            if (start_accept) begin
+                calc_active     <= 1'b1;
+            end else if (finish_pulse) begin
+                calc_active <= 1'b0;
+            end
+        end
+    end
+
     accumulator #(
         .DATA_WIDTH(DATA_WIDTH),
         .ACCUM_WIDTH(ACCUM_WIDTH),
         .N_MAX(N_MAX),
-        .WINDOW_SIZE(WINDOW_SIZE),
         .PACKET_SIZE(PACKET_SIZE)
     ) accum_main (
         .clk_in(clk_in),
         .rst(rst),
         .s_axis_tdata(s_axis_tdata),
         .s_axis_tvalid(s_axis_tvalid),
-        .start(start),
+        .start(start_accept),
         .smp_num(smp_num),
         .seq_num(seq_num),
+        .window_size(window_size),
         .out_data(out_data),
         .out_valid(out_valid),
         .readout_begin(readout_begin),
         .batch_req(batch_req),
-        .finish(finish)
+        .finish(finish_int)
     );
 
     out_axis_fifo #(
         .ACCUM_WIDTH(ACCUM_WIDTH),
-        .WINDOW_SIZE(WINDOW_SIZE),
         .PACKET_SIZE(PACKET_SIZE)
     ) output_async_fifo (
         .eth_clk_in    (eth_clk_in),
         .acc_clk_in    (clk_in),
         .rst           (rst),
         .smp_num       (smp_num),
+        .window_size   (window_size_reg),
 
         .m_axis_tdata  (m_axis_tdata),
         .m_axis_tvalid (m_axis_tvalid),
@@ -87,6 +117,6 @@ module accumulator_top
         .send_req      (send_req),
 
         .batch_req     (batch_req),
-        .finish        (finish)
+        .finish        (finish_int)
     );
-endmodule
+endmodule