32 lines
1.7 KiB
Python
32 lines
1.7 KiB
Python
"""Local editable config for ``librevna_generator_sweep.py``."""
|
|
|
|
from __future__ import annotations
|
|
|
|
from python_app.generator_sweep.config import GeneratorSweepConfig
|
|
|
|
|
|
CONFIG = GeneratorSweepConfig(
|
|
log_level="INFO", # DEBUG, INFO, WARNING, ERROR, or CRITICAL.
|
|
serial=None, # None or exact serial string, for example "206930A15532".
|
|
strict_protocol_version=14, # Exact value for the connected device: 14.
|
|
start_hz=100_000_000.0, # Script constraint: > 0. Device reports frequency range 0.0 .. 6_000_000_000.0 Hz.
|
|
stop_hz=6_000_000_000.0, # Script constraint: >= start_hz. Device reports frequency range 0.0 .. 6_000_000_000.0 Hz.
|
|
step_hz=0, # > 0 to use step mode, or 0 to disable and use points mode.
|
|
points=501, # 0 to disable, or >= 2 to use points mode; if start_hz == stop_hz then only 1 is allowed.
|
|
hold_time_ms=50.0, # >= 0 ms. Float values like 0.5 are allowed.
|
|
loop=True, # True or False.
|
|
port=1, # Only 1 or 2.
|
|
power_dbm=-10.0, # Device reports source power range -40.0 .. 0.0 dBm.
|
|
amplitude_correction=False, # True = apply source amplitude calibration, False = use raw generator level.
|
|
settle_timeout_ms=1_000, # > 0 ms.
|
|
status_poll_ms=10.0, # > 0 ms. Float values like 0.2 are allowed.
|
|
post_lock_delay_us=0, # >= 0 us.
|
|
gpio_chip="/dev/gpiochip0", # Non-empty Linux GPIO chip path.
|
|
sweep_start_pin=5, # BCM GPIO, >= 0, must differ from curr_step_pin and pwm_pin.
|
|
curr_step_pin=6, # BCM GPIO, >= 0, must differ from sweep_start_pin and pwm_pin.
|
|
curr_step_initial_level=0, # Only 0 or 1.
|
|
pwm_pin=12, # Only 12, 13, 18, or 19 on Raspberry Pi 5.
|
|
pwm_frequency_hz=2_000_000, # > 0 Hz.
|
|
pwm_duty_cycle=0.5, # Range: 0.0 < value <= 1.0.
|
|
)
|