per-point switching: hardware bring-up, profiles, protocol doc

Verified on the bench that the modified master bitstream excites in every stage
and the RF switch routes: 16 traces per sweep, 62 dB between the two switch
positions of one master port, 9.9k measurements/s. Adds the built master image,
two run profiles, a verification script and librevna_protocol.md, and drops the
stale prototype driver copy that the firmware tree still carried.

.gitignore

@@ -8,6 +8,7 @@ build*
 # C extensions
 python_app/data*
 *.so
+*.ipynb
 *.npy
 snapshots/
 test_results*
@@ -20,8 +21,8 @@ dist/
 downloads/
 eggs/
 .eggs/
-lib/
-lib64/
+/lib/
+/lib64/
 parts/
 sdist/
 var/
@@ -165,6 +166,25 @@ ENV/
 env.bak/
 venv.bak/
 
+# Локальные инструменты, распакованные не из пакетного менеджера (GHDL для
+# анализа и симуляции VHDL, clangd). Ставятся скриптом, в репозиторий не идут.
+.tools/
+
+# База компиляции для clangd: абсолютные пути этой машины.
+# Генерируется .claude/tools/gen_compile_commands.sh из Makefile.
+compile_commands.json
+
+# Граф знаний graphify: 22 МБ, пересобирается из кода за минуту.
+# Список исключений для него — в .graphifyignore, он тоже не версионируется
+# (см. ниже, вместе с остальной обвязкой Claude Code).
+graphify-out/
+
+# Payload комплекта установки на Windows: копия файлов из дерева LibreVNA.
+# Генерируется install_windows/make_files.sh; в git не идёт, чтобы не разойтись
+# с деревом (уже расходился).
+device_firmware/multi_libreVNA_firmware/reproduce/install_windows/files/
+device_firmware/multi_libreVNA_firmware/reproduce/install_windows/backup_original/
+
 # Spyder project settings
 .spyderproject
 .spyproject
@@ -225,6 +245,31 @@ __marimo__/
 python_app/runtime
 SHARE_INTERNET_TO_PI.md
 
+# Локальная обвязка Claude Code: инструкции, хуки, скилы, конфиги инструментов.
+# В репозиторий не идёт.
 CLAUDE.md
-docs/
+.claude/
+.graphifyignore
+pyrightconfig.json
+/docs/
 test_end_2/
+
+# --- device_firmware: PlatformIO / STM32G431 cart remote ---
+# build output (regenerated by `pio run`)
+device_firmware/cart_firmware/.pio/
+device_firmware/switch_controller/.pio/
+# scope captures: raw .bin + .npz + preview .png, local-only
+device_firmware/cart_firmware/captures/
+# machine-specific, regenerated by the PlatformIO extension
+device_firmware/cart_firmware/.vscode/c_cpp_properties.json
+device_firmware/cart_firmware/.vscode/launch.json
+device_firmware/cart_firmware/.vscode/ipch/
+device_firmware/cart_firmware/.vscode/.browse.c_cpp.db*
+# --- device_firmware: комплект воспроизведения прошивок LibreVNA ---
+# Корневые `build*` / `build/` иначе молча выбрасывают сам build.sh и эталонные
+# прошивки STM32, на которые ссылается reproduce/SHA256SUMS. Каталог сборки
+# приходится разыгнорить целиком: git не умеет возвращать файл, у которого
+# исключён родительский каталог.
+!device_firmware/multi_libreVNA_firmware/reproduce/build.sh
+!device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/Software/VNA_embedded/build/
+!device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/Software/VNA_embedded/build_external_lo_slave/

Makefile

@@ -65,17 +65,36 @@ PROCESSOR_SOURCES := \
 # from the vendored headers alone and only needs those libraries present at run
 # time. Built on demand (not part of `all`) for radar.model == kamil_adc.
 KAMIL_COLLECTOR_DIR := data_acq_and_processing/kamil_adc_collector
-KAMIL_COLLECTOR_INCLUDES := -I$(KAMIL_COLLECTOR_DIR)/include -I$(KAMIL_COLLECTOR_DIR)/vendor/lcard
+# The collector now also drives the RF switches itself (switch-aware mode), so it
+# reuses the orchestrator's switch drivers and the shared run_config loader, which
+# pull in the common config/ipc/locator headers and the vendored nlohmann/json.
+KAMIL_COLLECTOR_INCLUDES := \
+	-I$(KAMIL_COLLECTOR_DIR)/include \
+	-I$(KAMIL_COLLECTOR_DIR)/vendor/lcard \
+	-Idata_acq_and_processing/common_cpp/ipc/include \
+	-Idata_acq_and_processing/common_cpp/config/include \
+	-Idata_acq_and_processing/sweep_orchestrator/device_drivers/interfaces \
+	-Idata_acq_and_processing/sweep_orchestrator/device_drivers/switches \
+	-Idata_acq_and_processing/processing/locator/include \
+	-Idata_acq_and_processing/third_party
 KAMIL_COLLECTOR_LDFLAGS := -pthread -ldl -lutil
+# Collector sources, including the shared drivers/config loader it reuses. These
+# are compiled into a private build/kamil/ tree (see rule below) so they never
+# collide with the orchestrator's objects, which use different compile flags.
 KAMIL_COLLECTOR_SOURCES := \
 	$(KAMIL_COLLECTOR_DIR)/src/main.cpp \
 	$(KAMIL_COLLECTOR_DIR)/src/tty_protocol_writer.cpp \
-	$(KAMIL_COLLECTOR_DIR)/src/capture_file_writer.cpp
+	$(KAMIL_COLLECTOR_DIR)/src/capture_file_writer.cpp \
+	data_acq_and_processing/common_cpp/config/src/run_config.cpp \
+	data_acq_and_processing/common_cpp/ipc/src/shared_types.cpp \
+	data_acq_and_processing/sweep_orchestrator/device_drivers/switches/h7992_minimal_driver.cpp \
+	data_acq_and_processing/sweep_orchestrator/device_drivers/switches/hmc349a_minimal_driver.cpp
 
 SWEEP_ORCH_OBJS := $(addprefix $(BUILD_DIR)/,$(COMMON_SOURCES:.cpp=.o) $(ORCH_SOURCES:.cpp=.o))
 PREPROCESSOR_OBJS := $(addprefix $(BUILD_DIR)/,$(COMMON_SOURCES:.cpp=.o) $(PREPROC_SOURCES:.cpp=.o))
 DATA_PROCESSOR_OBJS := $(addprefix $(BUILD_DIR)/,$(COMMON_SOURCES:.cpp=.o) $(PROCESSOR_SOURCES:.cpp=.o))
-KAMIL_COLLECTOR_OBJS := $(addprefix $(BUILD_DIR)/,$(KAMIL_COLLECTOR_SOURCES:.cpp=.o))
+KAMIL_BUILD_DIR := $(BUILD_DIR)/kamil
+KAMIL_COLLECTOR_OBJS := $(addprefix $(KAMIL_BUILD_DIR)/,$(notdir $(KAMIL_COLLECTOR_SOURCES:.cpp=.o)))
 DEPFILES := $(sort $(SWEEP_ORCH_OBJS:.o=.d) $(PREPROCESSOR_OBJS:.o=.d) $(DATA_PROCESSOR_OBJS:.o=.d) $(KAMIL_COLLECTOR_OBJS:.o=.d))
 
 TARGETS := \
@@ -101,11 +120,15 @@ $(BIN_DIR)/data_processor: $(DATA_PROCESSOR_OBJS)
 	@mkdir -p $(BIN_DIR)
 	$(CXX) $(DATA_PROCESSOR_OBJS) -o $@ $(LDFLAGS)
 
-# The collector is self-contained: compile its objects with only the vendored
-# L-Card headers (no project/VISA includes) by overriding the generic rule's
-# variables for these objects, then link with dlopen/openpty support.
-$(KAMIL_COLLECTOR_OBJS): INCLUDES := $(KAMIL_COLLECTOR_INCLUDES)
-$(KAMIL_COLLECTOR_OBJS): VISA_CXXFLAGS :=
+# The collector compiles into its own build/kamil/ tree with collector-only
+# includes (no VISA), so the shared driver/config sources it reuses never collide
+# with the orchestrator's objects of the same name. Basenames are unique, so a
+# vpath lets one pattern rule find every source.
+vpath %.cpp $(sort $(dir $(KAMIL_COLLECTOR_SOURCES)))
+
+$(KAMIL_BUILD_DIR)/%.o: %.cpp
+	@mkdir -p $(dir $@)
+	$(CXX) $(CXXFLAGS) $(KAMIL_COLLECTOR_INCLUDES) -c $< -o $@
 
 $(BIN_DIR)/kamil_adc_collector: $(KAMIL_COLLECTOR_OBJS)
 	@mkdir -p $(BIN_DIR)

README.md

@@ -69,9 +69,11 @@ controls plus a pixel-identical live plot through an embedded web UI.
 
 ## Requirements
 
-- Linux (POSIX shared memory; GPIO on Raspberry Pi).
+- Linux (POSIX shared memory; GPIO on Raspberry Pi). The deployment target is a
+  **Raspberry Pi 5**; hardware PWM gating for the generator sweep is Pi 5
+  specific (GPIO12/13/18/19, `dtoverlay=pwm-2chan`).
 - A C++20 compiler and `make` — Eigen and nlohmann/json are vendored, so no extra C++ dependencies are needed.
-- Python 3.12 with a virtual environment.
+- **Python 3.10 or newer**, in a virtual environment.
 
 ## Build and run
 

data_acq_and_processing/common_cpp/ipc/include/shared_types.hpp

@@ -38,6 +38,13 @@ struct SweepTraceBlock {
     std::vector<Complex32> s11{};
     // Complex S21 samples for matching frequency points.
     std::vector<Complex32> s21{};
+    // Monotonic window in which THIS trace's sweep was measured, excluding the
+    // switch drive and settling that preceded it. In a switched matrix the
+    // collection is assembled combo by combo over many milliseconds, so the
+    // collection-level window says nothing about when an individual combo was
+    // measured. Zero on both is a valid "unmeasured" sentinel.
+    std::uint64_t capture_start_ns = 0;
+    std::uint64_t capture_end_ns = 0;
 };
 
 struct RawSweepCollection {

data_acq_and_processing/common_cpp/ipc/src/shared_types.cpp

@@ -172,6 +172,10 @@ void require_count_fits(std::uint32_t count, std::size_t min_bytes_each, BinaryR
     return trace;
 }
 
+// The capture windows live in a TRAILER after the trace blocks rather than inside
+// them, so a reader built before they existed still decodes every trace and simply
+// stops early. The trailer grows the same way: collection window first, then the
+// per-trace window table (one pair per trace, in trace order).
 void write_trace_collection(BinaryWriter& writer, std::uint32_t magic, const RawSweepCollection& collection) {
     writer.write(magic);
     writer.write(collection.collection_id);
@@ -184,6 +188,12 @@ void write_trace_collection(BinaryWriter& writer, std::uint32_t magic, const Raw
 
     writer.write(collection.capture_start_ns);
     writer.write(collection.capture_end_ns);
+
+    writer.write(checked_count_to_u32(collection.traces.size(), "Trace capture window count"));
+    for (const auto& trace : collection.traces) {
+        writer.write(trace.capture_start_ns);
+        writer.write(trace.capture_end_ns);
+    }
 }
 
 [[nodiscard]] auto read_trace_collection(BinaryReader& reader, std::uint32_t expected_magic) -> RawSweepCollection {
@@ -204,16 +214,31 @@ void write_trace_collection(BinaryWriter& writer, std::uint32_t magic, const Raw
         collection.traces.push_back(read_trace_block(reader));
     }
 
+    // Each trailer stage is optional: a payload from an older producer stops after
+    // the trace blocks (or after the collection window) and leaves the rest zeroed.
     if (reader.remaining_bytes() == 0U) {
         return collection;
     }
-    if (reader.remaining_bytes() != (sizeof(std::uint64_t) * 2U)) {
-        throw std::runtime_error("Unexpected trailing bytes in trace collection");
+    if (reader.remaining_bytes() < (sizeof(std::uint64_t) * 2U)) {
+        throw std::runtime_error("Truncated capture window in trace collection");
     }
 
     collection.capture_start_ns = reader.read<std::uint64_t>();
     collection.capture_end_ns = reader.read<std::uint64_t>();
 
+    if (reader.remaining_bytes() == 0U) {
+        return collection;
+    }
+
+    const auto trace_time_count = reader.read<std::uint32_t>();
+    if (trace_time_count != collection.traces.size()) {
+        throw std::runtime_error("Per-trace capture window count does not match trace count");
+    }
+    for (auto& trace : collection.traces) {
+        trace.capture_start_ns = reader.read<std::uint64_t>();
+        trace.capture_end_ns = reader.read<std::uint64_t>();
+    }
+
     return collection;
 }
 

data_acq_and_processing/common_cpp/ipc/src/shm_ring.cpp

@@ -188,7 +188,7 @@ auto ShmRing::open_or_create(
             const bool geometry_ok = header->capacity == capacity && header->slot_size_bytes == slot_size_bytes;
 
             if (magic_ok && version_ok && geometry_ok) {
-                // Fix #50: the requested mapped_size matched the header geometry, but the
+                // the requested mapped_size matched the header geometry, but the
                 // backing file may have been created undersized by another process. Confirm
                 // st_size covers the geometry before trusting the mapping.
                 struct stat info {};
@@ -257,7 +257,7 @@ auto ShmRing::open_existing(const std::string& name) -> ShmRing {
     if (header->version != kRingVersion) {
         throw std::runtime_error("Shared memory ring version mismatch for " + name);
     }
-    // Fix #50: ensure the mapping actually spans every slot the header describes.
+    // ensure the mapping actually spans every slot the header describes.
     validate_geometry(*header, mapped_size, name);
 
     ShmRing ring{};
@@ -411,7 +411,7 @@ void ShmRing::validate_name(const std::string& name) {
 }
 
 void ShmRing::validate_geometry(const Header& header, std::size_t mapped_size, const std::string& name) {
-    // Fix #50: derive the expected size from the header's own geometry fields and
+    // derive the expected size from the header's own geometry fields and
     // require the real mapping to cover it. A bogus capacity/slot_size or a truncated
     // mapping would otherwise yield out-of-bounds slot offsets and a SIGSEGV.
     const std::uint32_t capacity = header.capacity;

data_acq_and_processing/kamil_adc_collector/README.md

@@ -13,12 +13,18 @@ counterpart to the C++ `sweep_orchestrator` used by LibreVNA devices.
 | Path | Contents |
 |------|----------|
 | `src/` | Collector implementation (`main.cpp`) and the PTY / capture-file writers. |
-| `include/` | Headers for the writers. |
+| `include/` | Headers for the writers plus `switch_sequencer.h`. |
 | `vendor/lcard/` | L-Card X502/E502 SDK headers (`x502api.h`, `e502api.h`, `lcard_pstdint.h`), vendored verbatim so the collector builds with no external include path. |
 
-The sources under `src/` and `include/` are imported verbatim from the original
-standalone tool and are kept byte-for-byte identical — the wire format and
-acquisition behaviour are unchanged; only their home moved into this repo.
+The sources started as a verbatim import of the original standalone tool, but are
+**no longer identical to it**: the collector now drives the RF switches itself
+(switch-aware mode, `SwitchSequencer`), stepping to the next combination inside
+the hardware idle gap between sweeps and flagging a sweep *dirty* when a readout
+backlog means the toggle could not have landed in that gap. It therefore reuses
+the orchestrator's switch drivers and the shared `run_config` loader, which is why
+its build has its own include set and its own `build/kamil/` object tree.
+
+The wire format towards the Python producer is unchanged.
 
 ## Build
 

data_acq_and_processing/kamil_adc_collector/include/switch_sequencer.h

@@ -0,0 +1,147 @@
+#pragma once
+
+#include <cstddef>
+#include <memory>
+#include <utility>
+#include <vector>
+
+#include "shared_types.hpp"
+#include "switch_driver.hpp"
+
+namespace radar::kamil {
+
+/**
+ * @brief Drives the input/output RF switches in lock-step with sweep boundaries.
+ *
+ * The E-502 stream is free-running: sweeps are delimited by DI_SYN2 edges with a
+ * hardware idle gap between them. On every completed sweep we step to the next
+ * switch combination *during that gap*, so the next sweep starts already settled
+ * in the new state and no samples are lost.
+ *
+ * The one failure mode of doing this purely in software is the readout backlog:
+ * if, at the moment we observe a sweep's end, we are running so far behind real
+ * time that the toggle could not have landed within the gap, the upcoming sweep
+ * straddles the transition. We flag that sweep *dirty*; the consumer drops it and
+ * we re-take the same combination on the following sweep (which is then clean,
+ * because no transition happens during its gap). A clean sweep costs nothing; a
+ * miss costs exactly one extra sweep period for that one combination.
+ *
+ * The sequencer owns the two switch drivers and exposes only what the collector
+ * needs at a sweep boundary: which combination the upcoming sweep belongs to and
+ * whether it is expected to be clean. All timing policy lives here so the recv
+ * loop stays readable.
+ */
+class SwitchSequencer {
+  public:
+    struct Settings {
+        /// Combinations to cycle through, one sweep each, in order. Empty disables
+        /// the sequencer entirely (the collector then streams a single passthrough
+        /// channel exactly as before).
+        std::vector<radar::ipc::ComboKey> combos{};
+        /// Guaranteed minimum inter-sweep idle window, in milliseconds. This is a
+        /// hardware property of the sweep generator; treat it as a lower bound.
+        double gap_ms = 10.0;
+        /// RF settle time required after a position change, in milliseconds.
+        double settle_ms = 1.0;
+    };
+
+    SwitchSequencer(
+        Settings settings,
+        std::unique_ptr<drivers::SwitchDriver> input_switch,
+        std::unique_ptr<drivers::SwitchDriver> output_switch
+    )
+        : settings_(std::move(settings)),
+          input_switch_(std::move(input_switch)),
+          output_switch_(std::move(output_switch)) {}
+
+    [[nodiscard]] auto enabled() const -> bool { return !settings_.combos.empty(); }
+
+    /// Open both switch drivers and park at the first combination.
+    void open() {
+        if (!enabled()) {
+            return;
+        }
+        output_switch_->open();
+        input_switch_->open();
+        index_ = 0;
+        applied_ = settings_.combos.front();
+        apply(applied_);
+        upcoming_dirty_ = false;  // the first sweep is captured in a settled state
+    }
+
+    void close() {
+        if (!enabled()) {
+            return;
+        }
+        // Best-effort: teardown must never throw out of the collector's stop path.
+        try {
+            output_switch_->close();
+        } catch (...) {
+        }
+        try {
+            input_switch_->close();
+        } catch (...) {
+        }
+    }
+
+    /// Combination the in-progress / upcoming sweep is captured under.
+    [[nodiscard]] auto current_combo() const -> radar::ipc::ComboKey {
+        return settings_.combos[index_];
+    }
+
+    /// Whether the in-progress / upcoming sweep is expected to straddle a switch
+    /// transition and must be dropped by the consumer.
+    [[nodiscard]] auto current_dirty() const -> bool { return upcoming_dirty_; }
+
+    /**
+     * @brief Advance the sequence at a completed sweep's end (start of the gap).
+     *
+     * @param backlog_ms Estimated readout lag at this instant — how far behind
+     *        real time we are, i.e. how late the toggle we issue now will land.
+     *
+     * If the sweep that just ended was clean we step to the next combination and
+     * toggle the switches now, inside the gap. If it was dirty we re-take the same
+     * combination (the switches are already there and long settled). The upcoming
+     * sweep is marked dirty only when a real transition happens *and* the backlog
+     * leaves no room for it to settle before the next sweep starts.
+     */
+    void on_sweep_end(double backlog_ms) {
+        if (!enabled()) {
+            return;
+        }
+
+        if (upcoming_dirty_) {
+            // The sweep that just ended straddled a transition: re-take the same
+            // combination. The switches are already applied and settled, so the
+            // next sweep is clean without touching the hardware again.
+            upcoming_dirty_ = false;
+            return;
+        }
+
+        index_ = (index_ + 1U) % settings_.combos.size();
+        const radar::ipc::ComboKey next = settings_.combos[index_];
+        const bool position_changed = !(next == applied_);
+        if (position_changed) {
+            apply(next);
+            applied_ = next;
+        }
+        upcoming_dirty_ = position_changed && ((backlog_ms + settings_.settle_ms) > settings_.gap_ms);
+    }
+
+  private:
+    void apply(const radar::ipc::ComboKey& combo) {
+        // Output first, then input — same order the sweep orchestrator uses, so
+        // both acquisition paths drive an identical hardware sequence.
+        output_switch_->switch_to(combo.output_pos);
+        input_switch_->switch_to(combo.input_pos);
+    }
+
+    Settings settings_;
+    std::unique_ptr<drivers::SwitchDriver> input_switch_;
+    std::unique_ptr<drivers::SwitchDriver> output_switch_;
+    std::size_t index_ = 0;
+    radar::ipc::ComboKey applied_{};
+    bool upcoming_dirty_ = false;
+};
+
+}  // namespace radar::kamil

data_acq_and_processing/kamil_adc_collector/src/main.cpp

@@ -17,6 +17,11 @@
 #include "capture_file_writer.h"
 #include "tty_protocol_writer.h"
 
+#include "switch_sequencer.h"
+#include "run_config.hpp"
+#include "h7992_minimal_driver.hpp"
+#include "hmc349a_minimal_driver.hpp"
+
 #include <algorithm>
 #include <array>
 #include <atomic>
@@ -113,6 +118,12 @@ struct Config {
     std::string live_html_path = "live_plot.html";
     std::string live_json_path = "live_plot.json";
     std::optional<std::string> tty_path;
+    // When set, the collector reads switch and combo configuration from this
+    // run_config.json and drives the RF switches itself, one combination per
+    // sweep, tagging each emitted sweep with its combo (see SwitchSequencer).
+    std::optional<std::string> run_config_path;
+    double switch_gap_ms = 10.0;
+    double switch_settle_ms = 1.0;
     bool di1_group_average = false;
     bool do1_toggle_per_frame = false;
     bool do1_noise_subtract = false;
@@ -479,6 +490,7 @@ void print_help(const char* exe_name) {
         << "                [di1:zero|trace|ignore]\n"
         << "                [duration_ms:100] [packet_limit:0] [csv:capture.csv] [svg:capture.svg]\n"
         << "                [live_html:live_plot.html] [live_json:live_plot.json] [tty:/tmp/ttyADC_data] [di1_group_avg]\n"
+        << "                [config:run_config.json] [switch_gap_ms:10] [switch_settle_ms:1]\n"
         << "                [do1_toggle_per_frame] [do1_noise_subtract] [do1_raw_tty_marked] [do1_pair_subtract_avg] [noise_avg_steps:N]\n"
         << "                [do8_freq_ref] [do8_cycle_period:10] [do8_threshold:X]\n"
         << "                [recv_block:32768] [stats_period_ms:1000] [live_update_period_ms:1000] [svg_history_packets:50] [start_wait_ms:10000]\n"
@@ -514,6 +526,13 @@ void print_help(const char* exe_name) {
         << "  step_words:32768 -> input stream transfer step in 32-bit words\n"
         << "  live_html/live_json -> live graph files updated as packets arrive outside tty fast stream-only modes\n"
         << "  tty:/tmp/ttyADC_data -> write a continuous legacy 4-word CH1/CH2 stream; with channels:1, CH2 is 0\n"
+        << "  config:run_config.json -> switch-aware mode: read the input/output switch and combo\n"
+        << "                            configuration from this run_config.json and drive the RF switches\n"
+        << "                            in lock-step with sweeps; each sweep is tagged with its combo via a\n"
+        << "                            0x00C0 frame (input_pos, output_pos, dirty). Omit for standalone mode.\n"
+        << "  switch_gap_ms:10  -> guaranteed minimum inter-sweep idle window; lower bound used to decide\n"
+        << "                       whether an in-gap switch lands before the next sweep starts\n"
+        << "  switch_settle_ms:1 -> RF settle time required after a switch position change\n"
         << "  di1_group_avg -> with tty + di1:trace, emit one averaged 4-word step per constant DI1 run\n"
         << "  do1_toggle_per_frame -> hardware cyclic DO1 pattern in module memory:\n"
         << "                         DO1 outputs 00110011... continuously (toggle every 2 ADC ticks)\n"
@@ -793,6 +812,18 @@ Config parse_args(int argc, char** argv) {
             cfg.tty_path = arg.substr(4);
             continue;
         }
+        if (starts_with(arg, "config:")) {
+            cfg.run_config_path = arg.substr(7);
+            continue;
+        }
+        if (starts_with(arg, "switch_gap_ms:")) {
+            cfg.switch_gap_ms = parse_double(arg.substr(14), "switch_gap_ms");
+            continue;
+        }
+        if (starts_with(arg, "switch_settle_ms:")) {
+            cfg.switch_settle_ms = parse_double(arg.substr(17), "switch_settle_ms");
+            continue;
+        }
         fail("Unknown argument: " + arg);
     }
 
@@ -1203,6 +1234,10 @@ constexpr uint32_t kDo1TogglePeriodTicks = 2U;
 constexpr uint32_t kDo1CyclePatternWords = kDo1TogglePeriodTicks * 2U;
 constexpr uint32_t kDo8HighTicks = 2U;
 constexpr uint16_t kTtyMarkerDi8High = 0x00A8U;
+// Combo tag frame: [0x00C0, input_pos, output_pos, dirty]. Emitted right after a
+// sweep-boundary frame to tell the consumer which switch combination the upcoming
+// sweep belongs to, and whether it straddled a switch transition (dirty != 0).
+constexpr uint16_t kTtyMarkerComboTag = 0x00C0U;
 constexpr uint32_t kStreamInputAdcFlag = 0x80000000U;
 constexpr uint32_t kStreamInputCalibratedAdcFlag = 0x40000000U;
 
@@ -1802,6 +1837,55 @@ void print_device_info(const t_x502_info& info) {
               << "MCU firmware: " << info.mcu_firmware_ver << "\n";
 }
 
+// Build one switch driver (native GPIO or mock) from a parsed switch config,
+// reusing the exact driver implementations the sweep orchestrator uses so both
+// acquisition paths drive identical hardware.
+std::unique_ptr<radar::drivers::SwitchDriver> make_switch_driver(const radar::config::SwitchConfig& sc) {
+    if (sc.driver_kind == radar::config::SwitchDriverKind::HMC349A) {
+        return std::make_unique<radar::drivers::HMC349AMinimalDriver>(
+            radar::drivers::HMC349AMinimalDriverSettings{
+                .name = sc.name,
+                .mode = sc.driver_mode,
+                .positions = sc.positions,
+                .default_position = sc.default_position,
+                .gpio_chip = sc.gpio_chip,
+                .pin_a = sc.pin_a,
+                .invert_logic = sc.invert_logic,
+            });
+    }
+    return std::make_unique<radar::drivers::H7992MinimalDriver>(
+        radar::drivers::H7992MinimalDriverSettings{
+            .name = sc.name,
+            .mode = sc.driver_mode,
+            .positions = sc.positions,
+            .default_position = sc.default_position,
+            .gpio_chip = sc.gpio_chip,
+            .pin_a = sc.pin_a,
+            .pin_b = sc.pin_b,
+        });
+}
+
+// Construct the switch sequencer from the run_config given via `config:<path>`.
+// Returns nullptr (switching disabled, single-channel passthrough) when no config
+// was supplied or it declares no combinations.
+std::unique_ptr<radar::kamil::SwitchSequencer> make_switch_sequencer(const Config& cfg) {
+    if (!cfg.run_config_path.has_value()) {
+        return nullptr;
+    }
+    const radar::config::RunConfig rc = radar::config::load_run_config(*cfg.run_config_path);
+    if (rc.run_combos.empty()) {
+        return nullptr;
+    }
+    radar::kamil::SwitchSequencer::Settings settings;
+    settings.combos = rc.run_combos;
+    settings.gap_ms = cfg.switch_gap_ms;
+    settings.settle_ms = cfg.switch_settle_ms;
+    return std::make_unique<radar::kamil::SwitchSequencer>(
+        std::move(settings),
+        make_switch_driver(rc.input_switch),
+        make_switch_driver(rc.output_switch));
+}
+
 int run(const Config& cfg) {
     Api api;
     DeviceHandle device(api);
@@ -2029,6 +2113,21 @@ int run(const Config& cfg) {
             tty_writer->emit_packet_start(tty_packet_start_marker);
         }
     }
+    // Switch sequencer (optional): drives the RF switches in lock-step with sweep
+    // boundaries and tags each sweep with its combination. Disabled (nullptr) when
+    // no run_config was passed, so the standalone/calibration use stays unchanged.
+    std::unique_ptr<radar::kamil::SwitchSequencer> sequencer = make_switch_sequencer(cfg);
+    if (sequencer && sequencer->enabled()) {
+        sequencer->open();
+        std::cout << "Switch sequencer enabled: cycling switch combinations per sweep "
+                  << "(gap_ms=" << cfg.switch_gap_ms << ", settle_ms=" << cfg.switch_settle_ms << ")\n";
+    } else {
+        sequencer.reset();  // normalize to nullptr so call sites can test the pointer
+    }
+    // Estimated readout backlog (ms) at the current loop iteration; how far behind
+    // real time we are, used to decide whether an in-gap switch lands in time.
+    double current_backlog_ms = 0.0;
+
     std::unique_ptr<CaptureFileWriter> writer;
     if (!fast_tty_avg_stream_mode) {
         writer = std::make_unique<CaptureFileWriter>(cfg.csv_path, cfg.svg_path, cfg.live_html_path, cfg.live_json_path);
@@ -2317,6 +2416,15 @@ int run(const Config& cfg) {
 
     auto append_tty_packet_start = [&]() {
         append_tty_frame(tty_packet_start_marker, 0xFFFF, 0xFFFF, 0xFFFF);
+        // Right after the boundary, tag the upcoming sweep with its switch combo so
+        // the consumer can group sweeps and drop the dirty ones.
+        if (sequencer) {
+            const radar::ipc::ComboKey combo = sequencer->current_combo();
+            append_tty_frame(kTtyMarkerComboTag,
+                             static_cast<uint16_t>(combo.input_pos),
+                             static_cast<uint16_t>(combo.output_pos),
+                             static_cast<uint16_t>(sequencer->current_dirty() ? 1U : 0U));
+        }
     };
 
     auto append_tty_group_step = [&]() {
@@ -2714,6 +2822,12 @@ int run(const Config& cfg) {
             std::cout << "\n";
         }
 
+        // A real sweep just completed: step the switch sequence into the gap. A
+        // user-stop teardown is not a sweep boundary, so skip it.
+        if (sequencer && (frames != 0U) && (reason != PacketCloseReason::UserStop)) {
+            sequencer->on_sweep_end(current_backlog_ms);
+        }
+
         packet_active = false;
         packet_avg_steps = 0;
         fast_packet_frames = 0;
@@ -2768,6 +2882,11 @@ int run(const Config& cfg) {
             recv_request_words = std::min<uint32_t>(ready_words, read_capacity_words);
             recv_timeout_ms = 0;
         }
+        // Backlog already queued in the driver = how far behind real time we are.
+        // Drives the switch sequencer's in-gap clean/dirty decision.
+        if ((ready_err == X502_ERR_OK) && (combined_input_rate_hz > 0.0)) {
+            current_backlog_ms = 1000.0 * static_cast<double>(ready_words) / combined_input_rate_hz;
+        }
 
         const int32_t recvd = api.Recv(device.hnd, raw.data(), recv_request_words, recv_timeout_ms);
         if (recvd < 0) {
@@ -3170,6 +3289,11 @@ int run(const Config& cfg) {
 
     expect_ok(api, api.StreamsStop(device.hnd), "Stop streams");
     device.streams_started = false;
+
+    // Park the switches in their safe default and release the GPIO lines.
+    if (sequencer) {
+        sequencer->close();
+    }
     if (cfg.do1_toggle_per_frame) {
         const uint32_t clear_mask = kE502Do1Mask | kE502Do2Mask | (cfg.do8_freq_ref ? kE502Do8Mask : 0U);
         expect_ok(api,

data_acq_and_processing/preprocessing/calibration_master/src/calibration_master.cpp

@@ -34,6 +34,9 @@ auto CalibrationMaster::apply_to_trace(const ipc::SweepTraceBlock& measured_trac
     output.frequency_hz = measured_trace.frequency_hz;
     output.s21 = apply_s21(measured_trace.combo, measured_trace.frequency_hz, measured_trace.s21);
     output.s11 = apply_s11(measured_trace.combo, measured_trace.frequency_hz, measured_trace.s11);
+    // Calibration reshapes the samples, not when they were measured.
+    output.capture_start_ns = measured_trace.capture_start_ns;
+    output.capture_end_ns = measured_trace.capture_end_ns;
     return output;
 }
 

data_acq_and_processing/preprocessing/reference_master/src/reference_master.cpp

@@ -132,6 +132,9 @@ auto ReferenceMaster::apply_to_trace(const ipc::SweepTraceBlock& calibrated_trac
     output.frequency_hz = calibrated_trace.frequency_hz;
     output.s21 = apply_s21(calibrated_trace.combo, calibrated_trace.frequency_hz, calibrated_trace.s21);
     output.s11 = apply_s11(calibrated_trace.combo, calibrated_trace.frequency_hz, calibrated_trace.s11);
+    // Reference subtraction reshapes the samples, not when they were measured.
+    output.capture_start_ns = calibrated_trace.capture_start_ns;
+    output.capture_end_ns = calibrated_trace.capture_end_ns;
     return output;
 }
 

data_acq_and_processing/processing/data_processor/include/processing_live_config.hpp

@@ -45,8 +45,10 @@ struct ProcessingLiveConfig {
     float gpr_min_depth_m = 2.0F;
     float gpr_max_depth_m = 14.0F;
     float gpr_range_comp_power = 0.1F;
-    float gpr_angle_comp_power = 0.0F;
     float gpr_comp_power = 0.2F;
+    // BP object-detection stop level, as a fraction of the global peak (Python
+    // Horns_motion_3libre.py BP_OBJECT_MIN_FRAC); peaks below it are not objects.
+    float gpr_object_min_frac = 0.7F;
     std::string gpr_score_mode = "combined";
     // Backprojection intra-sweep speed-correction mode: "int_minus" (full
     // correction) or "int_focus" (focusing residual only). Mirrors the Python
@@ -73,13 +75,15 @@ struct ProcessingLiveConfig {
     // BP image is computed in the y=imaging_plane_y_m slice of the 3D grid.
     // Default 0 keeps legacy 1D antenna layouts imaging in the antenna plane.
     float gpr_imaging_plane_y_m = 0.0F;
-    // Locator filter parameters. Mode-dependent threshold (legacy_gpr uses
-    // `legacy_gpr_min_visible_pair_count`, everything else uses
-    // `gpr_min_visible_score`). Draw limits apply only to non-legacy modes.
-    float gpr_min_visible_score = 0.0F;
+    // Coherent BP object visibility (window + the draw limits below) is applied in
+    // the processor itself, matching Horns_motion_3libre.py — there is NO score
+    // threshold for it. Only legacy GPR still thresholds, on a pair count.
     float legacy_gpr_min_visible_pair_count = 0.0F;
     std::uint32_t gpr_max_detected_objects_to_draw = 0;
     std::uint32_t gpr_draw_top_m_objects = 0;
+    // Cross-frame approach filter: an object is shown only once it persists as a
+    // motion-consistent track over this many consecutive frames (<= 1 disables it).
+    std::uint32_t gpr_object_approach_min_frames = 3;
     // Visible X/Z window (metres). The locator clips broadcast objects to this
     // window so the socket emits only what the desktop plot actually shows.
     float gpr_visible_x_min_m = -2.0F;

data_acq_and_processing/processing/data_processor/src/data_processor.cpp

@@ -65,7 +65,7 @@ void DataProcessor::run(const std::atomic<bool>& stop_requested) {
     std::uint64_t last_applied_history_command_seq = 0;
     std::uint64_t error_count = 0;
     std::uint64_t consecutive_errors = 0;
-    // Fix #55: track the socket-fed speed used for the last reprocess so a change
+    // track the socket-fed speed used for the last reprocess so a change
     // arriving without a live-config revision bump still triggers a reprocess of
     // the current result (gated below by reprocess_current_result).
     std::optional<double> last_reprocessed_socket_speed = std::nullopt;
@@ -124,7 +124,7 @@ void DataProcessor::run(const std::atomic<bool>& stop_requested) {
                     publish_locator(replay_result, live_config);
                 }
                 last_replayed_revision = live_revision;
-                // Fix #55: record the speed we just reprocessed with so an
+                //record the speed we just reprocessed with so an
                 // unchanged socket value does not retrigger every iteration.
                 last_reprocessed_socket_speed = current_socket_speed;
             }
@@ -232,29 +232,23 @@ auto DataProcessor::build_locator_filter(const ProcessingLiveConfig& live_config
         live_config.processor_mode.empty() ? default_processor_mode_ : live_config.processor_mode;
 
     radar::locator::FilterParams filter{};
-    // Clip broadcast objects to the same visible X/Z window the desktop plot uses,
-    // so the socket emits only the objects the operator actually sees.
+    if (requested_mode == "legacy_gpr") {
+        // Legacy GPR emits its objects unfiltered, so the socket applies the legacy
+        // rule here: clip to the visible window and threshold on the pair count. The
+        // GUI disables "draw top N" for legacy, so we skip it on the wire to match.
         filter.visible_bounds = radar::locator::VisibleBounds{
             .x_min = live_config.gpr_visible_x_min_m,
             .x_max = live_config.gpr_visible_x_max_m,
             .z_min = live_config.gpr_visible_z_min_m,
             .z_max = live_config.gpr_visible_z_max_m,
         };
-    if (requested_mode == "legacy_gpr") {
         filter.min_score = live_config.legacy_gpr_min_visible_pair_count;
-        // The GUI deliberately disables the "draw top N" capping for legacy
-        // GPR, so we also skip it on the wire to match observation semantics.
         filter.draw_limits.reset();
-    } else {
-        filter.min_score = live_config.gpr_min_visible_score;
-        if (live_config.gpr_max_detected_objects_to_draw > 0U
-            && live_config.gpr_draw_top_m_objects > 0U) {
-            filter.draw_limits = radar::locator::DrawLimits{
-                .max_detected_objects = live_config.gpr_max_detected_objects_to_draw,
-                .draw_top_objects = live_config.gpr_draw_top_m_objects,
-            };
-        }
     }
+    // Coherent BP already emits the FINAL visible object set from the processor
+    // (window + N/M, no score threshold — matching Horns_motion_3libre.py), so the
+    // socket forwards it verbatim. The default FilterParams passes everything through
+    // (it only drops non-finite rows), keeping the filtering logic in one place.
     return filter;
 }
 

data_acq_and_processing/processing/data_processor/src/processing_live_config.cpp

@@ -255,11 +255,11 @@ void apply_legacy_gpr_algorithm_alias(ProcessingLiveConfig& config, const std::s
         }
         config.gpr_range_comp_power = static_cast<float>(found->get<double>());
     }
-    if (const auto found = root.find("gpr_angle_comp_power"); found != root.end()) {
+    if (const auto found = root.find("gpr_object_min_frac"); found != root.end()) {
         if (!found->is_number()) {
-            throw std::runtime_error("processing.gpr_angle_comp_power must be number");
+            throw std::runtime_error("processing.gpr_object_min_frac must be number");
         }
-        config.gpr_angle_comp_power = static_cast<float>(found->get<double>());
+        config.gpr_object_min_frac = static_cast<float>(found->get<double>());
     }
     if (const auto found = root.find("gpr_comp_power"); found != root.end()) {
         if (!found->is_number()) {
@@ -355,12 +355,6 @@ void apply_legacy_gpr_algorithm_alias(ProcessingLiveConfig& config, const std::s
         }
         config.gpr_imaging_plane_y_m = static_cast<float>(found->get<double>());
     }
-    if (const auto found = root.find("gpr_min_visible_score"); found != root.end()) {
-        if (!found->is_number()) {
-            throw std::runtime_error("processing.gpr_min_visible_score must be number");
-        }
-        config.gpr_min_visible_score = static_cast<float>(found->get<double>());
-    }
     for (const auto& [key, target] : {
              std::pair{"gpr_visible_x_min_m", &config.gpr_visible_x_min_m},
              std::pair{"gpr_visible_x_max_m", &config.gpr_visible_x_max_m},
@@ -388,6 +382,10 @@ void apply_legacy_gpr_algorithm_alias(ProcessingLiveConfig& config, const std::s
         config.gpr_draw_top_m_objects =
             parse_u32_number(*found, "processing.gpr_draw_top_m_objects");
     }
+    if (const auto found = root.find("gpr_object_approach_min_frames"); found != root.end()) {
+        config.gpr_object_approach_min_frames =
+            parse_u32_number(*found, "processing.gpr_object_approach_min_frames");
+    }
     if (const auto found = root.find("ignore_socket_speed"); found != root.end()) {
         if (!found->is_boolean()) {
             throw std::runtime_error("processing.ignore_socket_speed must be bool");

data_acq_and_processing/processing/processors/include/gpr_processor.hpp

@@ -1,5 +1,6 @@
 #pragma once
 
+#include "object_approach_filter.hpp"
 #include "processor_interface.hpp"
 
 namespace radar::processing {
@@ -13,6 +14,11 @@ class GprProcessor final : public ProcessorInterface {
         std::span<const ipc::PreprocessedCollection> previous_collections,
         const ProcessingLiveConfig& live_config
     ) -> ipc::ResultCollection override;
+
+  private:
+    // Cross-frame "approach" track filter. Persists across collections because the
+    // owning processor instance is long-lived (one per data_processor run).
+    ObjectApproachFilter approach_filter_{};
 };
 
 class LegacyGprProcessor final : public ProcessorInterface {

data_acq_and_processing/processing/processors/include/object_approach_filter.hpp

@@ -0,0 +1,172 @@
+#pragma once
+
+#include <algorithm>
+#include <cmath>
+#include <cstddef>
+#include <cstdint>
+#include <deque>
+#include <limits>
+#include <vector>
+
+namespace radar::processing {
+
+// Temporal "approach" filter for coherent-BP detections — a port of the objects-only
+// filter in Horns_motion_3libre's demonstrate notebook.
+//
+// It keeps only objects that persist as a *motion-consistent track* across at least
+// `min_frames` consecutive frames: as the radar moves, a real target reappears at a
+// predictable, shifting (x, z), whereas a one-frame noise spike forms no track and is
+// dropped. The expected per-frame change in range is `speed * dt * cos(look_angle)`,
+// where `dt` is the real interval between consecutive frames (so dropped frames and a
+// varying frame period are handled naturally).
+//
+// CAUSAL: unlike the offline notebook (which can look forward over the whole sequence),
+// this confirms a track by looking *backward* — an object is kept once it ends a track
+// of `min_frames` frames seen so far. A target therefore first appears after it has
+// persisted `min_frames` frames; the early frames of its track are not shown
+// retroactively.
+//
+// Stateless across pipeline restarts is approximated by breaking tracks across a large
+// inter-frame gap (`kMaxFrameGapSeconds`), so a stale history from a previous run cannot
+// spuriously confirm objects.
+//
+// IDEMPOTENT under reprocessing: the data_processor re-runs the last collection (or
+// replays the whole window) whenever live settings or the socket speed change, with no
+// new sweep. The history is therefore keyed by `frame_id` (the strictly increasing
+// collection id): the same id replaces its entry (reprocess of the current frame), a
+// smaller id rebuilds from scratch (a replay restart), so repeated reprocessing never
+// duplicates frames or falsely confirms a track.
+class ObjectApproachFilter {
+  public:
+    struct Point {
+        double x_m;
+        double z_m;
+    };
+
+    // Record `objects` as frame `frame_id` and return, per object, whether it is
+    // confirmed (ends a >= `min_frames` motion-consistent track). `frame_id` is the
+    // collection id (identity/order, survives reprocessing); `frame_time_seconds` is the
+    // frame's wall-clock timestamp (drives the inter-frame interval); `speed_m_s`/
+    // `look_angle_deg` are the live motion estimate. `min_frames <= 1` disables filtering.
+    [[nodiscard]] auto confirm(
+        const std::vector<Point>& objects,
+        std::uint64_t frame_id,
+        double frame_time_seconds,
+        double speed_m_s,
+        double look_angle_deg,
+        std::size_t min_frames
+    ) -> std::vector<bool> {
+        record_frame(Frame{frame_id, frame_time_seconds, objects});
+        const std::size_t history_depth = std::max<std::size_t>(min_frames, 1U);
+        while (history_.size() > history_depth) {
+            history_.pop_front();
+        }
+
+        std::vector<bool> confirmed(objects.size(), min_frames <= 1U);
+        if (min_frames <= 1U || history_.size() < min_frames) {
+            return confirmed;  // disabled, or not enough history yet to confirm anything
+        }
+
+        const double range_step_per_second = std::abs(speed_m_s) * std::cos(to_radians(look_angle_deg));
+        for (std::size_t object_index = 0U; object_index < objects.size(); ++object_index) {
+            confirmed[object_index] = has_backward_track(objects[object_index], min_frames, range_step_per_second);
+        }
+        return confirmed;
+    }
+
+    void reset() { history_.clear(); }
+
+  private:
+    struct Frame {
+        std::uint64_t id;
+        double time_seconds;
+        std::vector<Point> objects;
+    };
+
+    // Append a genuinely new frame, replace the current one on reprocessing (same id),
+    // or rebuild from scratch when the id steps backward (a replay restart). This keeps
+    // the history one entry per distinct collection no matter how often settings change.
+    void record_frame(Frame frame) {
+        if (history_.empty() || frame.id > history_.back().id) {
+            history_.push_back(std::move(frame));
+        } else if (frame.id == history_.back().id) {
+            history_.back() = std::move(frame);
+        } else {
+            history_.clear();
+            history_.push_back(std::move(frame));
+        }
+    }
+
+    // Fixed matching tolerances (Horns_motion notebook 0.2 block). Range decreases as the
+    // radar approaches the target, hence the negative Z sign.
+    static constexpr double kXToleranceM = 0.45;
+    static constexpr double kRangeToleranceFraction = 0.85;
+    static constexpr double kRangeToleranceFloorM = 0.12;
+    static constexpr double kRangeSign = -1.0;
+    static constexpr double kMaxFrameGapSeconds = 2.0;
+
+    [[nodiscard]] static auto to_radians(double degrees) -> double {
+        return degrees * (M_PI / 180.0);
+    }
+
+    // Walk back from the current object through the history, matching a motion-consistent
+    // predecessor in each earlier frame. Confirmed iff a full chain of `min_frames` frames
+    // (the current one plus `min_frames - 1` predecessors) is found.
+    [[nodiscard]] auto has_backward_track(
+        const Point& object,
+        std::size_t min_frames,
+        double range_step_per_second
+    ) const -> bool {
+        const std::size_t newest = history_.size() - 1U;
+        Point current = object;
+        for (std::size_t step = 1U; step < min_frames; ++step) {
+            const std::size_t earlier_index = newest - step;
+            const Frame& earlier = history_[earlier_index];
+            const double dt = history_[earlier_index + 1U].time_seconds - earlier.time_seconds;
+            if (!(dt > 0.0) || dt > kMaxFrameGapSeconds) {
+                return false;  // non-monotonic time, or a gap that breaks the track
+            }
+            const double expected_range_shift = range_step_per_second * dt;
+            const Point* predecessor = match_predecessor(current, earlier.objects, expected_range_shift);
+            if (predecessor == nullptr) {
+                return false;
+            }
+            current = *predecessor;
+        }
+        return true;
+    }
+
+    // The best earlier-frame object consistent with `object` having moved by one frame:
+    // its range was larger by `expected_range_shift` (radar since approached), within the
+    // cross-range and range tolerances. Returns nullptr when nothing matches.
+    [[nodiscard]] static auto match_predecessor(
+        const Point& object,
+        const std::vector<Point>& candidates,
+        double expected_range_shift
+    ) -> const Point* {
+        const double target_z = object.z_m - (kRangeSign * expected_range_shift);
+        const double range_tolerance =
+            std::max(kRangeToleranceFloorM, kRangeToleranceFraction * expected_range_shift);
+
+        const Point* best = nullptr;
+        double best_cost = std::numeric_limits<double>::infinity();
+        for (const Point& candidate : candidates) {
+            const double dx = std::abs(candidate.x_m - object.x_m);
+            const double dz = std::abs(candidate.z_m - target_z);
+            if (dx > kXToleranceM || dz > range_tolerance) {
+                continue;
+            }
+            const double cost = (dx / kXToleranceM) * (dx / kXToleranceM)
+                + (dz / range_tolerance) * (dz / range_tolerance);
+            if (cost < best_cost) {
+                best = &candidate;
+                best_cost = cost;
+            }
+        }
+        return best;
+    }
+
+    std::deque<Frame> history_{};  // recent frames, newest at the back; capped to min_frames
+};
+
+}  // namespace radar::processing

data_acq_and_processing/processing/processors/src/gpr_backprojection_processor.ipp

@@ -21,7 +21,6 @@ constexpr double kSmoothSigma = 1.5;
 // same default 'reflect' (half-sample symmetric) extension — see reflect_index.
 constexpr double kGaussianTruncate = 4.0;
 constexpr std::size_t kMaxObjects = 10U;
-constexpr double kObjectMinFrac = 0.7;
 constexpr double kRegionThresholdFrac = 0.75;
 constexpr double kSuppressThresholdFrac = 0.20;
 constexpr double kSuppressRadiusXM = 0.80;
@@ -1405,7 +1404,8 @@ void apply_depth_gate(
 
 [[nodiscard]] auto find_bp_objects(
     const std::vector<double>& bp_image,
-    const GridDefinition& grid
+    const GridDefinition& grid,
+    double min_frac
 ) -> std::vector<ObjectRecord> {
     std::vector<ObjectRecord> objects{};
     if (bp_image.empty() || grid.x_grid.size() < 2U || grid.z_grid.size() < 2U) {
@@ -1414,7 +1414,7 @@ void apply_depth_gate(
 
     std::vector<double> work = bp_image;
     const double global_peak = max_value(work);
-    const double stop_level = kObjectMinFrac * global_peak;
+    const double stop_level = min_frac * global_peak;
     if (!(global_peak > 0.0)) {
         return objects;
     }
@@ -1740,7 +1740,15 @@ void add_bp_score_metrics(
     }
 }
 
-[[nodiscard]] auto output_objects_sorted(
+// Select the FINAL visible objects exactly as Horns_motion_3libre.py does, so the
+// processor is the single source of truth: the GUI plot and the locator socket both
+// consume this set verbatim (no second, duplicated filter). Steps, in order:
+//   1. drop sidelobe candidates (when enabled), then sort by score (peak tie-break);
+//   2. clip to the visible X/Z window (display window doubles as an object gate);
+//   3. apply the N/M draw rule (BP_MAX_DETECTED_OBJECTS_TO_DRAW / BP_DRAW_TOP_M_OBJECTS):
+//      if more than N survive, show none; otherwise keep the top M.
+// There is deliberately NO score threshold (the Python reference has none).
+[[nodiscard]] auto select_visible_objects(
     const std::vector<ObjectRecord>& objects,
     const ProcessingLiveConfig& live_config
 ) -> std::vector<const ObjectRecord*> {
@@ -1750,6 +1758,12 @@ void add_bp_score_metrics(
         if (live_config.gpr_remove_sidelobe_objects_enabled && object.sidelobe_candidate) {
             continue;
         }
+        if (object.x_m < live_config.gpr_visible_x_min_m
+            || object.x_m > live_config.gpr_visible_x_max_m
+            || object.z_m < live_config.gpr_visible_z_min_m
+            || object.z_m > live_config.gpr_visible_z_max_m) {
+            continue;
+        }
         visible.push_back(&object);
     }
 
@@ -1759,6 +1773,17 @@ void add_bp_score_metrics(
         }
         return left->selected_score > right->selected_score;
     });
+
+    // N/M draw rule (0 on either disables limiting, mirroring the GUI/locator default).
+    const auto max_detected = live_config.gpr_max_detected_objects_to_draw;
+    const auto draw_top = live_config.gpr_draw_top_m_objects;
+    if (max_detected > 0U && draw_top > 0U) {
+        if (visible.size() > max_detected) {
+            visible.clear();
+        } else if (visible.size() > draw_top) {
+            visible.resize(draw_top);
+        }
+    }
     return visible;
 }
 
@@ -1815,7 +1840,8 @@ void add_bp_score_metrics(
     const config::RunConfig& run_config,
     const ipc::PreprocessedCollection& collection,
     std::span<const ipc::PreprocessedCollection> previous_collections,
-    const ProcessingLiveConfig& live_config
+    const ProcessingLiveConfig& live_config,
+    ObjectApproachFilter& approach_filter
 ) -> ipc::ResultCollection {
     ipc::ResultCollection results{};
     results.collection_id = collection.collection_id;
@@ -1833,8 +1859,10 @@ void add_bp_score_metrics(
         return results;
     }
 
-    const double velocity_mps =
-        kSpeedOfLightMetersPerSec / std::sqrt(std::max(1e-6, static_cast<double>(run_config.gpr.relative_permittivity)));
+    // Coherent BP fixes the medium to vacuum/air (eps_r = 1), matching the Python
+    // reference Horns_motion_3libre.py (its 0.3 block hardcodes eps_r = 1.0). The
+    // configurable relative_permittivity stays a legacy-GPR-only knob.
+    const double velocity_mps = kSpeedOfLightMetersPerSec;
     const double start_hz = static_cast<double>(live_config.gpr_start_freq_mhz) * 1'000'000.0;
     const double stop_hz = static_cast<double>(live_config.gpr_stop_freq_mhz) * 1'000'000.0;
     const double min_depth_m = static_cast<double>(live_config.gpr_min_depth_m);
@@ -1920,7 +1948,7 @@ void add_bp_score_metrics(
         min_depth_m,
         max_depth_m,
         std::max(0.0, static_cast<double>(live_config.gpr_range_comp_power)),
-        std::max(0.0, static_cast<double>(live_config.gpr_angle_comp_power))
+        0.0  // angle compensation fixed off (Python Horns_motion_3libre.py COMP_ANGLE_POWER = 0.0)
     );
     if (bp.image.empty()) {
         return results;
@@ -1930,7 +1958,7 @@ void add_bp_score_metrics(
     const auto incoherent_display_map =
         normalize_bp_map(bp.incoherent, grid, min_depth_m, max_depth_m, kSmoothSigma);
 
-    auto objects = find_bp_objects(display_map, grid);
+    auto objects = find_bp_objects(display_map, grid, static_cast<double>(live_config.gpr_object_min_frac));
     add_local_prominence_metrics(objects, display_map, grid, min_depth_m, max_depth_m);
     add_incoherent_support_metrics(objects, incoherent_display_map, bp.coherence_factor);
     mark_sidelobe_candidates(objects, selected_traces, selection, imaging_plane_y_m);
@@ -1951,14 +1979,34 @@ void add_bp_score_metrics(
 
     results.collection_payloads.push_back(build_image_payload("gpr_accumulator", grid.x_grid, grid.z_grid, display_map));
 
+    // Final visible set (window + N/M), then the cross-frame approach filter: keep only
+    // objects confirmed as a >= min_frames motion-consistent track (Horns_motion notebook).
+    const auto visible = select_visible_objects(objects, live_config);
+    std::vector<ObjectApproachFilter::Point> visible_points{};
+    visible_points.reserve(visible.size());
+    for (const auto* object : visible) {
+        visible_points.push_back({object->x_m, object->z_m});
+    }
+    const auto confirmed = approach_filter.confirm(
+        visible_points,
+        collection.collection_id,
+        static_cast<double>(collection.monotonic_ns) * 1e-9,
+        static_cast<double>(live_config.gpr_speed_m_s),
+        static_cast<double>(live_config.gpr_look_angle_deg),
+        static_cast<std::size_t>(live_config.gpr_object_approach_min_frames)
+    );
+
     std::vector<std::vector<float>> point_rows{};
-    point_rows.reserve(objects.size());
-    for (const auto* object : output_objects_sorted(objects, live_config)) {
+    point_rows.reserve(visible.size());
+    for (std::size_t index = 0U; index < visible.size(); ++index) {
+        if (!confirmed[index]) {
+            continue;
+        }
         point_rows.push_back(
             {
-                static_cast<float>(object->x_m),
-                static_cast<float>(object->z_m),
-                static_cast<float>(object->selected_score),
+                static_cast<float>(visible[index]->x_m),
+                static_cast<float>(visible[index]->z_m),
+                static_cast<float>(visible[index]->selected_score),
             }
         );
     }

data_acq_and_processing/processing/processors/src/gpr_processor.cpp

@@ -36,7 +36,7 @@ auto GprProcessor::process_collection(
     std::span<const ipc::PreprocessedCollection> previous_collections,
     const ProcessingLiveConfig& live_config
 ) -> ipc::ResultCollection {
-    return process_backprojection_gpr(run_config, collection, previous_collections, live_config);
+    return process_backprojection_gpr(run_config, collection, previous_collections, live_config, approach_filter_);
 }
 
 auto LegacyGprProcessor::name() const -> std::string {

data_acq_and_processing/sweep_orchestrator/src/sweep_orchestrator.cpp

@@ -147,14 +147,18 @@ class DriverLifecycleGuard {
 // Worst-case serialized size of a collection given the configured combo count and sweep
 // point count, using the trace wire format (see ipc::write_trace_collection/write_trace_block):
 //   collection header: magic(4) + collection_id(8) + monotonic_ns(8) + trace_count(4)
-//                     + capture_start_ns(8) + capture_end_ns(8) = 40 bytes
+//                     + capture_start_ns(8) + capture_end_ns(8)
+//                     + trace capture window count(4) = 44 bytes
 //   per trace block:   input_pos(4) + output_pos(4) + point_count(4) = 12 bytes
 //                     + per point: frequency(4) + s11(8) + s21(8) = 20 bytes
+//                     + trailer: capture_start_ns(8) + capture_end_ns(8) = 16 bytes
 [[nodiscard]] auto worst_case_serialized_bytes(std::size_t combo_count, std::uint32_t sweep_points) -> std::size_t {
-    constexpr std::size_t kCollectionHeaderBytes = 40U;
+    constexpr std::size_t kCollectionHeaderBytes = 44U;
     constexpr std::size_t kTraceHeaderBytes = 12U;
     constexpr std::size_t kBytesPerPoint = 20U;
-    const std::size_t per_trace = kTraceHeaderBytes + (static_cast<std::size_t>(sweep_points) * kBytesPerPoint);
+    constexpr std::size_t kTraceTrailerBytes = 16U;
+    const std::size_t per_trace =
+        kTraceHeaderBytes + (static_cast<std::size_t>(sweep_points) * kBytesPerPoint) + kTraceTrailerBytes;
     return kCollectionHeaderBytes + (combo_count * per_trace);
 }
 
@@ -207,7 +211,7 @@ SweepOrchestrator::SweepOrchestrator(
 void SweepOrchestrator::run(const std::atomic<bool>& stop_requested) {
     // Fail fast on a config error: a slot that is too small for the worst-case payload can
     // never carry a full collection, so report it clearly at startup instead of dropping
-    // every collection at runtime (fix #27).
+    // every collection at runtime.
     const auto worst_case_bytes = worst_case_serialized_bytes(config_.run_combos.size(), config_.radar.sweep.points);
     if (worst_case_bytes > raw_ring_.slot_size_bytes()) {
         throw std::runtime_error(
@@ -219,7 +223,7 @@ void SweepOrchestrator::run(const std::atomic<bool>& stop_requested) {
     }
 
     DriverLifecycleGuard lifecycle_guard(radar_driver_, input_switch_driver_, output_switch_driver_);
-    // Wait for the devices to become available before starting (fix #8/#9): an absent device
+    // Wait for the devices to become available before starting: an absent device
     // makes the orchestrator wait, not exit.
     if (!lifecycle_guard.open_all_with_retry(stop_requested)) {
         return;  // stop requested before any device became available
@@ -290,7 +294,12 @@ auto SweepOrchestrator::acquire_one_collection(
         // Production drivers ignore this; mock drivers use it to give every
         // (input, output) pair its own synthetic response.
         radar_driver_.set_active_combo(combo);
+        // Stamp around the sweep only: the switch drive and settling above belong to
+        // neither the previous combo nor this one, so excluding them keeps the window
+        // an honest "when was this combo actually measured".
+        const auto sweep_start_ns = ipc::current_monotonic_ns();
         auto sweep = radar_driver_.acquire_sweep();
+        const auto sweep_end_ns = ipc::current_monotonic_ns();
         validate_sweep(sweep);
 
         ipc::SweepTraceBlock trace{};
@@ -298,6 +307,8 @@ auto SweepOrchestrator::acquire_one_collection(
         trace.frequency_hz = std::move(sweep.frequency_hz);
         trace.s11 = std::move(sweep.s11);
         trace.s21 = std::move(sweep.s21);
+        trace.capture_start_ns = sweep_start_ns;
+        trace.capture_end_ns = sweep_end_ns;
         collection.traces.push_back(std::move(trace));
     }
 

device_firmware/cart_firmware/.gitignore

@@ -0,0 +1,5 @@
+.pio
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/ipch

device_firmware/cart_firmware/.vscode/extensions.json

@@ -0,0 +1,10 @@
+{
+    // See http://go.microsoft.com/fwlink/?LinkId=827846
+    // for the documentation about the extensions.json format
+    "recommendations": [
+        "platformio.platformio-ide"
+    ],
+    "unwantedRecommendations": [
+        "ms-vscode.cpptools-extension-pack"
+    ]
+}

device_firmware/cart_firmware/docs/protocol.md

@@ -0,0 +1,57 @@
+# Протокол старого пульта тележки (реверс-инжиниринг)
+
+Снято 2026-08-20 осциллографом Hantek DPO7204C с сигнального провода пульта
+(канал CH3). Инструменты: `tools/capture.py` (захват), `tools/decode.py`
+(декодер), сырые данные и картинки — в `captures/`.
+
+## Физический уровень
+
+- Один сигнальный провод, логика **3.3 В**.
+- **Инвертированный UART** (стандартная полярность SBUS): в покое линия
+  **низкая** (~0 В), импульсы вверх до ~3.3 В.
+- Скорость **100 000 бод**, формат **8E2** (8 бит данных, чётность even,
+  2 стоп-бита), биты LSB-first. Длительность бита 10 мкс.
+
+## Кадровый уровень — SBUS
+
+Стандартный кадр Futaba SBUS, 25 байт (3 мс на линии):
+
+| Смещение | Размер | Содержимое |
+|---|---|---|
+| 0 | 1 | Заголовок `0x0F` |
+| 1 | 22 | 16 каналов × 11 бит, упакованы подряд LSB-first |
+| 23 | 1 | Флаги: bit0=CH17, bit1=CH18, bit2=frame_lost, bit3=failsafe |
+| 24 | 1 | Футер `0x00` |
+
+Распаковка каналов: 22 байта складываются в 176-битное число LSB-first,
+канал N (N=0..15) = биты [11·N .. 11·N+10], диапазон значений 0–2047.
+
+- Кадры отправляются каждые **50 мс** (20 Гц). Это медленнее стандартного
+  SBUS (7/14 мс) — ответная часть с этим темпом работает.
+- Флаги во всех наблюдениях = `0x00`.
+
+## Карта каналов (нумерация с 1)
+
+| Управление | Канал | Мин | Нейтраль | Макс |
+|---|---|---|---|---|
+| Стик вперёд/назад | **2** | 433 (назад) | 1024 | 1643 (вперёд) |
+| Стик влево/вправо | **4** | 446 (влево) | 1024 | 1654 (вправо) |
+| Остальные 14 | — | всегда 1024 | | |
+
+Диапазон осей ~±600 от нейтрали (не полная шкала SBUS). Других органов
+управления на пульте нет.
+
+Эталонный кадр нейтрали (hex):
+
+```
+0F 00 04 20 00 01 08 40 00 02 10 80 00 04 20 00 01 08 40 00 02 10 80 00 00
+```
+
+## Воспроизведение на STM32G431
+
+- USART: 100000 бод, 8 бит + чётность even (в терминах STM32: M=1, 9-bit
+  с PCE=1), 2 стоп-бита, **TXINV=1** (аппаратная инверсия TX) — бит-бэнг
+  не нужен.
+- Отправлять 25-байтовый кадр по таймеру каждые 50 мс.
+- Нейтраль: все каналы 1024; управление — каналы 2 и 4 в измеренных
+  диапазонах.

device_firmware/cart_firmware/platformio.ini

@@ -0,0 +1,10 @@
+[env:weact_g431cb]
+platform = ststm32
+board = genericSTM32G431CB
+framework = arduino
+upload_protocol = stlink
+debug_tool = stlink
+monitor_speed = 115200
+build_flags =
+    -DUSBCON
+    -DUSBD_USE_CDC

device_firmware/cart_firmware/src/main.cpp

@@ -0,0 +1,166 @@
+// Пульт тележки: стик (АЦП PA0/PA1) -> SBUS на USART1 TX (PA9).
+// Протокол: инвертированный SBUS, 100000 бод 8E2, 25 байт каждые 50 мс
+// (см. docs/protocol.md). USB CDC (Serial) — отладочный вывод.
+#include <Arduino.h>
+
+// ---- калибровка стика (АЦП 12 бит, замерено 2026-08-20) ----
+static const int X_FWD = 650, X_MID = 2014, X_BACK = 3378;   // PA0 (плечи равны: 2014-650 = 3378-2014 = 1364)
+static const int Y_RIGHT = 479, Y_MID = 1981, Y_LEFT = 3586; // PA1
+static const int DEADZONE = 15; // отсечка дребезга вокруг нейтрали
+
+// ---- SBUS-значения старого пульта ----
+static const uint16_t SBUS_MID = 1024;
+static const uint16_t CH2_MIN = 433, CH2_MAX = 1643;  // назад..вперёд
+static const uint16_t CH4_MIN = 446, CH4_MAX = 1654;  // влево..вправо
+
+// ---- expo: 0 = линейно, 1 = максимально мягкая нейтраль ----
+static const float EXPO_K = 0.0f;
+// ---- общий масштаб выхода: 1.0 = диапазон старого пульта ----
+static const float RANGE_SCALE = 0.75f;
+
+// симметричные плечи: вперёд и назад дают одинаковый максимум
+static const uint16_t CH2_SPAN = 591; // min(1643-1024, 1024-433)
+static const uint16_t CH4_SPAN = 578; // min(1654-1024, 1024-446)
+
+// ---- профиль газа/поворота ----
+static const float MOVE_START = 0.15f; // старт движения, доля хода стика
+static const float POWER_FWD  = 0.60f; // потолок «вперёд»
+static const float POWER_BACK = 0.50f; // потолок «назад»
+static const float POWER_TURN = 0.70f; // потолок поворота
+static const uint16_t CH2_DB = 221;    // мёртвая зона приёмника тележки (ЗАМЕРИТЬ по монитору)
+static const uint16_t CH4_DB = 221;
+
+static const uint32_t FRAME_PERIOD_MS = 50;
+static const uint32_t PIN_X = PA0;
+static const uint32_t PIN_Y = PA1;
+
+static UART_HandleTypeDef s_sbusUart;
+
+// USART1 TX = PA9 (AF7), 100000 бод, 8E2, TX инвертирован
+static void sbusUartInit() {
+    __HAL_RCC_GPIOA_CLK_ENABLE();
+    __HAL_RCC_USART1_CLK_ENABLE();
+
+    GPIO_InitTypeDef gpio = {};
+    gpio.Pin = GPIO_PIN_9;
+    gpio.Mode = GPIO_MODE_AF_PP;
+    gpio.Pull = GPIO_NOPULL;
+    gpio.Speed = GPIO_SPEED_FREQ_LOW;
+    gpio.Alternate = GPIO_AF7_USART1;
+    HAL_GPIO_Init(GPIOA, &gpio);
+
+    s_sbusUart.Instance = USART1;
+    s_sbusUart.Init.BaudRate = 100000;
+    s_sbusUart.Init.WordLength = UART_WORDLENGTH_9B; // 8 данных + чётность
+    s_sbusUart.Init.StopBits = UART_STOPBITS_2;
+    s_sbusUart.Init.Parity = UART_PARITY_EVEN;
+    s_sbusUart.Init.Mode = UART_MODE_TX;
+    s_sbusUart.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+    s_sbusUart.Init.OverSampling = UART_OVERSAMPLING_16;
+    s_sbusUart.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_TXINVERT_INIT;
+    s_sbusUart.AdvancedInit.TxPinLevelInvert = UART_ADVFEATURE_TXINV_ENABLE;
+    HAL_UART_Init(&s_sbusUart);
+}
+
+// нормализация одной оси в [-1..1] с мёртвой зоной и асимметричными плечами
+static float axisNorm(int adc, int lowEnd, int mid, int highEnd) {
+    float x;
+    if (adc < mid - DEADZONE) {
+        x = (float)(mid - adc) / (float)(mid - lowEnd); // к lowEnd -> +1
+    } else if (adc > mid + DEADZONE) {
+        x = -(float)(adc - mid) / (float)(highEnd - mid); // к highEnd -> -1
+    } else {
+        return 0.0f;
+    }
+    return constrain(x, -1.0f, 1.0f);
+}
+
+// expo-кривая: гасит чувствительность у нейтрали, сохраняет края
+static float expo(float x) {
+    return EXPO_K * x * x * x + (1.0f - EXPO_K) * x;
+}
+
+static uint16_t toSbus(float x, uint16_t span) {
+    return (uint16_t)(SBUS_MID + lroundf(x * span));
+}
+
+// стик [-1..1] -> SBUS-значение канала: ниже MOVE_START — нейтраль, выше —
+// линейно от порога срабатывания приёмника (db) до POWER_FRAC*span на полном стике
+static uint16_t driveToSbus(float x, uint16_t span, uint16_t db,
+                            float powerPos, float powerNeg) {
+    float mag = fabsf(x);
+    if (mag <= MOVE_START)
+        return SBUS_MID;
+    float outMax = (x > 0.0f ? powerPos : powerNeg) * span;
+    float t = (mag - MOVE_START) / (1.0f - MOVE_START);
+    long delta = lroundf(db + t * (outMax - db));
+    return (x > 0.0f) ? (uint16_t)(SBUS_MID + delta)
+                      : (uint16_t)(SBUS_MID - delta);
+}
+
+static void sbusPack(uint8_t out[25], const uint16_t ch[16]) {
+    out[0] = 0x0F;
+    memset(out + 1, 0, 22);
+    uint32_t bitpos = 0;
+    for (int n = 0; n < 16; n++) {
+        for (int b = 0; b < 11; b++) {
+            if (ch[n] & (1u << b))
+                out[1 + (bitpos >> 3)] |= 1u << (bitpos & 7);
+            bitpos++;
+        }
+    }
+    out[23] = 0x00; // флаги
+    out[24] = 0x00; // футер
+}
+
+static int readAvg(uint32_t pin) {
+    uint32_t acc = 0;
+    for (int i = 0; i < 16; i++)
+        acc += analogRead(pin);
+    return acc / 16;
+}
+
+void setup() {
+    Serial.begin(115200);
+    analogReadResolution(12);
+    pinMode(PIN_X, INPUT_ANALOG);
+    pinMode(PIN_Y, INPUT_ANALOG);
+    sbusUartInit();
+}
+
+void loop() {
+    static uint32_t next = 0;
+    uint32_t now = millis();
+    if (now < next)
+        return;
+    next = now + FRAME_PERIOD_MS;
+
+    int adcX = readAvg(PIN_X);
+    int adcY = readAvg(PIN_Y);
+    // вперёд = adcX к X_FWD (вниз) -> +1; вправо = adcY к Y_RIGHT -> +1
+    float fwd = axisNorm(adcX, X_FWD, X_MID, X_BACK);
+    float right = axisNorm(adcY, Y_RIGHT, Y_MID, Y_LEFT);
+
+    uint16_t ch[16];
+    for (int i = 0; i < 16; i++)
+        ch[i] = SBUS_MID;
+    ch[1] = driveToSbus(fwd, CH2_SPAN, CH2_DB, POWER_FWD, POWER_BACK);  // канал 2 — газ
+    ch[3] = driveToSbus(right, CH4_SPAN, CH4_DB, POWER_TURN, POWER_TURN); // канал 4 — поворот
+
+    uint8_t frame[25];
+    sbusPack(frame, ch);
+    HAL_UART_Transmit(&s_sbusUart, frame, sizeof(frame), 20);
+
+    Serial.print("adc=");
+    Serial.print(adcX);
+    Serial.print(",");
+    Serial.print(adcY);
+    Serial.print(" fwd=");
+    Serial.print(fwd, 3);
+    Serial.print(" right=");
+    Serial.print(right, 3);
+    Serial.print(" ch2=");
+    Serial.print(ch[1]);
+    Serial.print(" ch4=");
+    Serial.println(ch[3]);
+}

device_firmware/cart_firmware/tools/analyze.py

@@ -0,0 +1,34 @@
+#!/usr/bin/env python3
+"""Analyze a captured frame: extract pulse timing structure.
+
+Usage: .venv/bin/python tools/analyze.py captures/<name>.npz
+"""
+import sys
+
+import numpy as np
+
+path = sys.argv[1]
+d = np.load(path)
+volts = d["volts"]
+srate = float(d["srate"])
+dt_us = 1e6 / srate
+
+# threshold midway between the two dominant plateaus
+hi_level = np.median(volts)  # idle dominates the frame -> median = idle (high)
+lo_level = np.percentile(volts, 10)
+thr = (hi_level + lo_level) / 2
+bits = (volts > thr).astype(np.int8)
+print(f"levels: high~{hi_level:.2f} low~{lo_level:.2f} thr={thr:.2f} (raw units)")
+
+# run-length encode
+edges = np.flatnonzero(np.diff(bits)) + 1
+starts = np.concatenate(([0], edges))
+ends = np.concatenate((edges, [len(bits)]))
+levels = bits[starts]
+dur_us = (ends - starts) * dt_us
+
+print(f"{len(levels)} runs total")
+print("\nidx level dur_us (first/last runs are idle padding)")
+for i, (lv, du) in enumerate(zip(levels, dur_us)):
+    tag = "H" if lv else "L"
+    print(f"{i:4d} {tag} {du:10.2f}")

device_firmware/cart_firmware/tools/capture.py

@@ -0,0 +1,116 @@
+#!/usr/bin/env python3
+"""Capture one single-shot CH3 frame from Hantek DPO7204C, save raw + PNG.
+
+Flow: query settings -> :SINGle -> poll :TRIGger:STATus? until STOP ->
+WAVeform:DATA:ALL? CHANnel3 (drained completely, multi-packet aware).
+Scope is left in STOP so the on-screen frame matches the saved data.
+
+Usage: .venv/bin/python tools/capture.py <name> [device]
+Saves captures/<name>.bin, captures/<name>.npz, captures/<name>.png
+"""
+import os
+import sys
+import time
+
+import matplotlib
+
+matplotlib.use("Agg")
+import matplotlib.pyplot as plt
+import numpy as np
+
+DEV = sys.argv[2] if len(sys.argv) > 2 else "/dev/usbtmc2"
+NAME = sys.argv[1] if len(sys.argv) > 1 else "capture"
+OUTDIR = os.path.join(os.path.dirname(os.path.abspath(__file__)), "..", "captures")
+os.makedirs(OUTDIR, exist_ok=True)
+
+FIRST_HDR = 11 + 117  # '#9'+9-digit len, then 18 bytes counters + 99 bytes info
+NEXT_HDR = 11 + 18    # follow-up packets: counters only
+
+
+def read_exact(fd, n):
+    buf = b""
+    while len(buf) < n:
+        chunk = os.read(fd, min(1 << 20, n - len(buf)))
+        if not chunk:
+            raise IOError("short read from scope")
+        buf += chunk
+    return buf
+
+
+def read_packet(fd):
+    head = read_exact(fd, 11)
+    assert head[:2] == b"#9", f"bad packet start: {head!r}"
+    pkt_len = int(head[2:11])
+    body = read_exact(fd, pkt_len)
+    return head + body
+
+
+def query(fd, cmd):
+    os.write(fd, cmd.encode() + b"\n")
+    return os.read(fd, 256).decode(errors="replace").strip()
+
+
+fd = os.open(DEV, os.O_RDWR)
+print("IDN:", query(fd, "*IDN?"))
+
+tdiv = float(query(fd, ":TIMebase:SCALe?"))
+vdiv = float(query(fd, ":CHANnel3:SCALe?"))
+voff = float(query(fd, ":CHANnel3:OFFSet?"))
+print(f"tdiv={tdiv} s/div  vdiv={vdiv} V/div  offset={voff} V")
+
+os.write(fd, b":SINGle\n")
+for _ in range(100):
+    time.sleep(0.1)
+    st = query(fd, ":TRIGger:STATus?")
+    if st == "STOP":
+        break
+else:
+    sys.exit(f"scope did not reach STOP (last status: {st})")
+print("status: STOP (frame captured)")
+
+srate = float(query(fd, ":ACQuire:SRATe?"))
+print(f"srate={srate:.3e} Sa/s")
+
+os.write(fd, b"WAVeform:DATA:ALL? CHANnel3\n")
+pkt = read_packet(fd)
+total_len = int(pkt[11:20])
+info_hdr = pkt[29:FIRST_HDR]
+data = pkt[FIRST_HDR:]
+raw_all = pkt
+while len(data) < total_len:
+    os.write(fd, b"WAVeform:DATA:ALL? CHANnel3\n")
+    p = read_packet(fd)
+    raw_all += p
+    data += p[NEXT_HDR:]
+print(f"received {len(data)} samples (declared {total_len})")
+print("info header hex:", info_hdr.hex(" "))
+os.close(fd)
+
+raw = np.frombuffer(data[:total_len], dtype=np.uint8).astype(np.float32)
+# unsigned 8-bit, 25.6 levels/div, mid-screen = code 128, offset shifts zero
+volts = (raw - 128.0) / 25.6 * vdiv - voff
+t = np.arange(len(volts)) / srate * 1e3  # ms
+
+base = os.path.join(OUTDIR, NAME)
+with open(base + ".bin", "wb") as f:
+    f.write(raw_all)
+np.savez(base + ".npz", volts=volts, srate=srate, vdiv=vdiv, voff=voff, tdiv=tdiv)
+
+fig, axes = plt.subplots(2, 1, figsize=(16, 8))
+axes[0].plot(t, volts, lw=0.5)
+axes[0].set_title(f"{NAME} — full frame ({srate:.0e} Sa/s, {vdiv} V/div, off {voff} V)")
+# zoom on activity: region where signal deviates from its median
+dev_idx = np.where(np.abs(volts - np.median(volts)) > 0.5)[0]
+if len(dev_idx):
+    lo = max(0, dev_idx[0] - int(0.05 * (dev_idx[-1] - dev_idx[0] + 1)) - 100)
+    hi = min(len(volts), dev_idx[-1] + int(0.05 * (dev_idx[-1] - dev_idx[0] + 1)) + 100)
+    axes[1].plot(t[lo:hi], volts[lo:hi], lw=0.7)
+    axes[1].set_title("zoom on activity")
+for ax in axes:
+    ax.set_xlabel("t, ms")
+    ax.set_ylabel("U, V")
+    ax.grid(True, alpha=0.3)
+fig.tight_layout()
+fig.savefig(base + ".png", dpi=110)
+print("saved:", base + ".png")
+print(f"range: min={volts.min():.3f} V  max={volts.max():.3f} V  median={np.median(volts):.3f} V")

device_firmware/cart_firmware/tools/compare.py

@@ -0,0 +1,91 @@
+#!/usr/bin/env python3
+"""Rigorous comparison of two SBUS captures (old remote vs our firmware).
+
+Usage: .venv/bin/python tools/compare.py captures/a.npz captures/b.npz
+"""
+import sys
+
+import numpy as np
+
+
+def extract(path):
+    d = np.load(path)
+    v = d["volts"]
+    srate = float(d["srate"])
+    idle = np.median(v)
+    p10, p90 = np.percentile(v, [10, 90])
+    active = p10 if abs(p10 - idle) > abs(p90 - idle) else p90
+    thr = (idle + active) / 2
+    phys_hi = v > thr  # physical high (pulse)
+    # plateau levels: median of samples well inside each state
+    lvl_hi = np.median(v[phys_hi])
+    lvl_lo = np.median(v[~phys_hi])
+    # runs
+    sig = phys_hi.astype(np.int8)
+    edges = np.flatnonzero(np.diff(sig)) + 1
+    starts = np.concatenate(([0], edges))
+    ends = np.concatenate((edges, [len(sig)]))
+    levels = sig[starts]
+    dur_us = (ends - starts) * 1e6 / srate
+    # burst envelope: first to last physical-high sample
+    hi_idx = np.flatnonzero(phys_hi)
+    envelope_us = (hi_idx[-1] - hi_idx[0] + 1) * 1e6 / srate
+    # inner runs (drop leading/trailing idle)
+    runs = [(int(l), float(du)) for l, du in zip(levels[1:-1], dur_us[1:-1])]
+    # UART logic: logic1 == idle state; idle here is physical low
+    stream = []
+    for l, du in runs:
+        n = max(1, round(du / 10.0))
+        stream.extend([1 - l] * n)  # physical high -> logic 0
+    stream.extend([1] * 24)
+    frames = []
+    i = 0
+    while i + 12 <= len(stream):
+        if stream[i] == 1:
+            i += 1
+            continue
+        byte = sum(b << k for k, b in enumerate(stream[i + 1 : i + 9]))
+        frames.append(byte)
+        i += 12
+    # bit clock estimate: envelope should be 299 bits (last stop bits merge w/ idle)
+    n_units = round(envelope_us / 10.0)
+    bit_us = envelope_us / n_units
+    return {
+        "lvl_hi": lvl_hi,
+        "lvl_lo": lvl_lo,
+        "runs": runs,
+        "frames": frames,
+        "envelope_us": envelope_us,
+        "bit_us": bit_us,
+        "vmin": float(v.min()),
+        "vmax": float(v.max()),
+    }
+
+
+a_path, b_path = sys.argv[1], sys.argv[2]
+A, B = extract(a_path), extract(b_path)
+
+print(f"{'':24s} {'A: ' + a_path:>28s} {'B: ' + b_path:>28s}")
+print(f"{'bytes decoded':24s} {len(A['frames']):>28d} {len(B['frames']):>28d}")
+ha = " ".join(f"{x:02X}" for x in A["frames"])
+hb = " ".join(f"{x:02X}" for x in B["frames"])
+print(f"frames identical: {A['frames'] == B['frames']}")
+print(" A:", ha)
+print(" B:", hb)
+print(f"{'run count':24s} {len(A['runs']):>28d} {len(B['runs']):>28d}")
+qa = [round(du / 10) for _, du in A["runs"]]
+qb = [round(du / 10) for _, du in B["runs"]]
+la = [l for l, _ in A["runs"]]
+lb = [l for l, _ in B["runs"]]
+print(f"quantized run pattern identical: {qa == qb and la == lb}")
+print(f"{'envelope, us':24s} {A['envelope_us']:>28.2f} {B['envelope_us']:>28.2f}")
+print(f"{'bit time, us':24s} {A['bit_us']:>28.4f} {B['bit_us']:>28.4f}")
+print(f"{'-> baud':24s} {1e6/A['bit_us']:>28.1f} {1e6/B['bit_us']:>28.1f}")
+print(f"{'high plateau, V':24s} {A['lvl_hi']:>28.3f} {B['lvl_hi']:>28.3f}")
+print(f"{'low plateau, V':24s} {A['lvl_lo']:>28.3f} {B['lvl_lo']:>28.3f}")
+print(f"{'abs min/max, V':24s} {A['vmin']:>14.2f}/{A['vmax']:>12.2f} {B['vmin']:>14.2f}/{B['vmax']:>12.2f}")
+
+# worst run deviation from ideal 10us grid
+da = max(abs(du - 10 * round(du / 10)) for _, du in A["runs"])
+db = max(abs(du - 10 * round(du / 10)) for _, du in B["runs"])
+print(f"{'worst grid dev, us':24s} {da:>28.2f} {db:>28.2f}")

device_firmware/cart_firmware/tools/decode.py

@@ -0,0 +1,76 @@
+#!/usr/bin/env python3
+"""Decode a captured frame as SBUS: UART 100 kbit/s 8E2, 25-byte frame,
+16 channels x 11 bits.
+
+Usage: .venv/bin/python tools/decode.py captures/<name>.npz
+"""
+import sys
+
+import numpy as np
+
+BIT_US = 10.0
+
+path = sys.argv[1]
+d = np.load(path)
+volts = d["volts"]
+srate = float(d["srate"])
+dt_us = 1e6 / srate
+
+# idle level dominates the record; UART logic 1 == idle regardless of
+# physical polarity (this line is standard inverted SBUS: idle low)
+idle = np.median(volts)
+p10, p90 = np.percentile(volts, [10, 90])
+active = p10 if abs(p10 - idle) > abs(p90 - idle) else p90
+thr = (idle + active) / 2
+if active > idle:
+    sig = (volts < thr).astype(np.int8)  # pulses up -> logic 0
+else:
+    sig = (volts > thr).astype(np.int8)
+
+edges = np.flatnonzero(np.diff(sig)) + 1
+starts = np.concatenate(([0], edges))
+ends = np.concatenate((edges, [len(sig)]))
+levels = sig[starts]
+dur_us = (ends - starts) * dt_us
+
+stream = []
+for lv, du in zip(levels[1:-1], dur_us[1:-1]):
+    stream.extend([int(lv)] * max(1, round(du / BIT_US)))
+# trailing idle of last stop bits is trimmed by run cut; pad with idle-high
+stream.extend([1] * 24)
+
+# deframe 8E2: start=0, 8 data LSB-first, even parity, 2 stop=1
+i = 0
+frames = []
+errors = []
+while i + 12 <= len(stream):
+    if stream[i] == 1:
+        i += 1
+        continue
+    data = stream[i + 1 : i + 9]
+    par = stream[i + 9]
+    stops = stream[i + 10 : i + 12]
+    byte = sum(b << k for k, b in enumerate(data))
+    if par != (sum(data) & 1):
+        errors.append((len(frames), "parity"))
+    if stops != [1, 1]:
+        errors.append((len(frames), f"stop={stops}"))
+    frames.append(byte)
+    i += 12
+
+print(f"decoded {len(frames)} bytes, errors: {errors if errors else 'none'}")
+print("hex:", " ".join(f"{b:02X}" for b in frames))
+
+if len(frames) >= 25 and frames[0] == 0x0F:
+    payload = frames[1:23]
+    flags = frames[23]
+    footer = frames[24]
+    bits = 0
+    for k, b in enumerate(payload):
+        bits |= b << (8 * k)
+    ch = [(bits >> (11 * n)) & 0x7FF for n in range(16)]
+    print("\nSBUS frame OK" if footer == 0x00 else f"\nfooter unexpected: {footer:02X}")
+    print("channels:", ch)
+    print(f"flags: 0x{flags:02X} (bit0=ch17 bit1=ch18 bit2=frame_lost bit3=failsafe)")
+else:
+    print("not a valid SBUS frame (no 0x0F header)")

device_firmware/cart_firmware/tools/scope.py

@@ -0,0 +1,51 @@
+#!/usr/bin/env python3
+"""Minimal SCPI helper for Hantek DPO7204C over /dev/usbtmc2."""
+import os
+import sys
+import time
+
+DEV = "/dev/usbtmc2"
+
+
+class Scope:
+    def __init__(self, dev=DEV):
+        self.fd = os.open(dev, os.O_RDWR)
+
+    def write(self, cmd: str):
+        os.write(self.fd, cmd.encode() + b"\n")
+
+    def read(self, n=1 << 20, timeout=3.0) -> bytes:
+        # usbtmc read returns one transfer chunk; loop until short read
+        chunks = []
+        end = time.time() + timeout
+        while time.time() < end:
+            try:
+                data = os.read(self.fd, n)
+            except OSError:
+                break
+            chunks.append(data)
+            if not data or len(data) < n:
+                break
+        return b"".join(chunks)
+
+    def query(self, cmd: str, timeout=3.0) -> str:
+        self.write(cmd)
+        return self.read(timeout=timeout).decode(errors="replace").strip()
+
+    def query_raw(self, cmd: str, timeout=5.0) -> bytes:
+        self.write(cmd)
+        return self.read(timeout=timeout)
+
+    def close(self):
+        os.close(self.fd)
+
+
+if __name__ == "__main__":
+    s = Scope()
+    for cmd in sys.argv[1:]:
+        if cmd.endswith("?"):
+            print(f"{cmd:40s} -> {s.query(cmd)}")
+        else:
+            s.write(cmd)
+            print(f"{cmd:40s} [sent]")
+    s.close()

device_firmware/librevna_protocol.md

@@ -0,0 +1,267 @@
+# Бинарный протокол LibreVNA: что шлёт и парсит наш драйвер
+
+Разбор USB-протокола LibreVNA и того, какое его подмножество использует
+`python_app/hardware_full/librevna_multi_device_driver`. Про переключение
+стимула внутри частотной точки — отдельный документ,
+[per_point_switching.md](per_point_switching.md).
+
+Прошивка в репозитории лежит под
+`device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/Software/VNA_embedded/Application/`,
+дальше он сокращён до `<FW>`. Версия протокола, заявленная прошивкой —
+`Protocol::Version = 14` (`<FW>/Communication/Protocol.hpp:13`).
+
+## 1. Транспорт
+
+Поверх USB у LibreVNA свой бинарный протокол, а не tty/serial. Endpoints:
+
+| Endpoint | Направление |
+| --- | --- |
+| `0x01` | хост -> устройство |
+| `0x81` | устройство -> хост |
+| `0x82` | отладочные ASCII-логи |
+
+Наш драйвер шлёт в `0x01`, читает из `0x81`, `0x82` не использует. Приёмный
+поток и очередь пакетов — в `librevna_multi_device_driver/transport.py`.
+
+Очередь принятых пакетов ограничена и работает по принципу drop-oldest:
+блокировать USB-поток чтения нельзя, а устаревшие пакеты всё равно
+выбрасываются предсборочным дренажом (`transport.py:109`).
+
+## 2. Структура кадра
+
+Одна и та же почти для всех типов пакетов
+(`<FW>/Communication/PacketConstants.h`):
+
+| Поле | Длина | Значение |
+| --- | --- | --- |
+| Header | 1 | всегда `0x5A` |
+| Length | 2 | длина **всего** кадра, little-endian |
+| Type | 1 | номер типа пакета |
+| Payload | переменная | |
+| CRC32 | 4 | по всему кадру, включая header |
+
+Итого накладных расходов 8 байт: `длина кадра = 8 + len(payload)`.
+
+Кодирование и разбор на хосте — в общем модуле одиночного драйвера, а не в
+multi-device: `python_app/hardware_full/librevna_driver/protocol/frame.py`,
+функции `encode_frame` (строка 25) и `decode_frame` (строка 49). Поток байт
+разбирает `FrameScanner`, который умеет ресинхронизироваться после битого кадра,
+не роняя устройство.
+
+### CRC: у `VNADatapoint` особый случай
+
+Прошивка **не считает** CRC для `VNADatapoint` и пишет туда ноль, потому что
+расчёт занимает около 18 мкс — это основная часть времени кодирования и
+передачи точки (`<FW>/Communication/Protocol.cpp:149`). На приёме она,
+наоборот, **требует** ровно нуля: непустой CRC у datapoint считается ошибкой
+(`Protocol.cpp:69` и `Protocol.cpp:80`).
+
+Наш хост повторяет это поведение точно: `decode_frame` проверяет CRC32 для всех
+типов, а для `VNADatapoint` требует ноль (`frame.py:20` — список исключений).
+
+Дополнительно multi-device парсер отбраковывает пакет, у которого тело не
+кратно 9 байтам на значение: раз CRC у datapoint нет, это единственная защита
+от ресинхронизации на `0x5A`, случайно оказавшийся внутри payload
+(`librevna_multi_device_driver/protocol.py:137`).
+
+## 3. Типы пакетов
+
+Полный enum — `<FW>/Communication/Protocol.hpp:573`, там 30+ типов. Наш драйвер
+использует шесть (`librevna_multi_device_driver/protocol.py:17`):
+
+| Тип | Номер | Зачем |
+| --- | --- | --- |
+| `SweepSettings` | 2 | настройка развёртки, она же её запуск |
+| `Ack` | 7 | подтверждение команды |
+| `Nack` | 10 | отказ |
+| `Reference` | 11 | выбор источника опорной частоты |
+| `SetIdle` | 20 | остановить развёртку, перевести в idle |
+| `VNADatapoint` | 27 | поток измерений |
+
+То есть это узкий VNA-sweep-драйвер, а не полная реализация всех режимов
+прибора. Не используются `RequestDeviceInfo`, проверка версии протокола,
+`SetTrigger`/`ClearTrigger`, генератор, анализатор спектра, калибровочные
+пакеты.
+
+## 4. Пакеты, которые шлём
+
+### `Reference` (11)
+
+Структура — `Protocol.hpp:186`: `uint32 ExtRefOuputFreq` плюс битовое поле
+`AutomaticSwitch` и `UseExternalRef`.
+
+Шлём `output_frequency_hz = 0` и флаг внешней опоры: выход `Ref Out` не
+включаем, а устройству принудительно указываем использовать внешние 10 МГц.
+Строит `build_reference_settings_payload` (`protocol.py:48`), отправляет
+`controller.py`.
+
+### `SweepSettings` (2)
+
+Структура — `Protocol.hpp:155`:
+
+```c
+uint64 f_start, f_stop;
+uint16 points;
+uint32 if_bandwidth;
+int16  cdbm_excitation_start;
+uint8  standby:1, syncMaster:1, suppressPeaks:1, fixedPowerSetting:1,
+       logSweep:1, syncMode:2, unused1:1;
+uint16 stages:3, port1Stage:3, port2Stage:3, port3Stage:3, port4Stage:3, unused2:1;
+int16  cdbm_excitation_stop;
+uint16 dwell_time;          // в микросекундах
+```
+
+Что кладём (`build_sweep_settings_payload`, `protocol.py:58`):
+
+- `f_start`/`f_stop`/`points`/`if_bandwidth` — из `SweepConfiguration`;
+- мощность старта и стопа одинаковая, `fixedPowerSetting = 1` — аттенюатор и
+  мощность PLL не меняются по развёртке;
+- `suppressPeaks = 1`, `logSweep = 0`, `standby = 0`;
+- `syncMode = 3` (триггерная синхронизация), если синхронизация включена;
+- `syncMaster = 1` только у мастера;
+- `stages` — номер последней стадии, не их количество;
+- порт-стадии — см. ниже.
+
+Про `syncMode = 3`: в стоковой прошивке рядом с полем стоит комментарий
+«Trigger synchronization (not supported yet by hardware)». В нашем форке этот
+режим и используется — устройство переводит обе триггерные линии FPGA в Hi-Z.
+
+**Порт-стадии — не то, что было в первой версии драйвера.** Раньше мастер
+получал `port1Stage = 0`, а слейв `1`. Сейчас:
+
+- мастеру отправляется **первая стадия блока** порта (`index * substage_count`);
+  без под-стадий это просто индекс порта, то есть стоковая раскладка;
+- приёмным устройствам обе порт-стадии выставляются в
+  `DISABLED_PORT_STAGE = 7` (`protocol.py:36`) — «порт выключен»;
+- ширина блока под-стадий передаётся как `log2` в неиспользуемое поле
+  `port3Stage`.
+
+Почему именно так и почему семёрка безопасна — в
+[per_point_switching.md](per_point_switching.md).
+
+### `SetIdle` (20)
+
+Без payload. Выключает активный режим и останавливает развёртку. Используется
+как служебная команда: остановить непрерывную развёртку, убраться при ошибке,
+`close()`.
+
+### `Ack` (7) / `Nack` (10)
+
+Ответы устройства на команды хоста. `wait_for_acknowledgement`
+(`transport.py:96`) читает входящие пакеты, на `Ack` считает команду
+применённой, на `Nack` бросает исключение, прочие асинхронные пакеты
+пропускает.
+
+## 5. `VNADatapoint` (27) — поток измерений
+
+Шаблон `VNADatapoint<s>` — `Protocol.hpp:25`; у прошивки `s = 32`, то есть до 32
+значений в точке (три на стадию при восьми стадиях).
+
+Payload:
+
+| Поле | Тип | Длина |
+| --- | --- | --- |
+| `frequency` | uint64 | 8 |
+| `cdBm` | int16 | 2 |
+| `pointNum` | uint16 | 2 |
+| `real_values` | n × float32 | 4n |
+| `imag_values` | n × float32 | 4n |
+| `descr_values` | n × uint8 | n |
+
+Фиксированная часть — 12 байт, дальше по 9 байт на значение, причём **не
+чередуясь**: сначала все реальные части, потом все мнимые, потом все
+дескрипторы. Отсюда `n = (len(payload) - 12) / 9`.
+
+Разбирает `parse_vna_datapoint_payload` (`protocol.py:137`).
+
+### Байт дескриптора
+
+Смещения битов — `<FW>/Communication/PacketConstants.h:42`:
+
+| Биты | Значение |
+| --- | --- |
+| 0 | порт 1 |
+| 1 | порт 2 |
+| 2 | порт 3 |
+| 3 | порт 4 |
+| 4 | опорный приёмник (Reference) |
+| 5..7 | номер стадии |
+
+То же отражено в `enum class Source` (`Protocol.hpp:17`): `Port1 = 0x01`,
+`Port2 = 0x02`, `Port3 = 0x04`, `Port4 = 0x08`, `Reference = 0x10`.
+Прошивка собирает байт как `stage << 5 | sourceMask`.
+
+На каждую стадию приходит ровно три значения (`<FW>/VNA.cpp:407`): порт 1, порт
+2 и опорный приёмник. **Ловушка:** у опорного значения маска не `0x10`, а
+`Port1 | Port2 | Reference = 0x13` — то есть биты портов у него тоже стоят.
+Поэтому отбирать сигнальное значение только по биту порта нельзя, надо ещё
+требовать сброшенный бит 4; именно так и сделано в `find_receiver_value`.
+
+Ищет значение по этому байту `find_receiver_value` (`protocol.py:174`) —
+фильтрует по стадии, по признаку опорного приёмника и, если задан, по порту.
+Например: «стадия 0 + ref» — опорный приёмник мастера; «стадия 0 + порт 1, не
+ref» — сигнал на первом приёмнике.
+
+## 6. Как из этого получаются S-параметры
+
+Устройство S-параметры **не считает** — оно отдаёт только сырые комплексные
+отсчёты приёмников. Считает хост, в
+`librevna_multi_device_driver/cycle_collection.py`.
+
+Нормировка (`calculate_last_cycle_s_parameters`, строка 783): каждый канал
+делится на опорный приёмник **мастера**, а не на локальный опорный приёмник
+слейва — потому что излучает именно мастер. Опорные измерения хранятся по
+номеру выходного канала (`master_reference_measurements_by_output`), так как с
+переключением стимула выходов больше, чем портов мастера.
+
+Имена S-параметров: отражение мастера — `master_reflection_s_parameter_name`
+(строка 760), прямые каналы — `build_forward_s_parameter_names` (строка 765).
+Нумерация приёмных портов слейвов начинается **после** всех выходов, чтобы
+`S33`/`S44` отражения не столкнулись с прямыми каналами.
+
+## 7. Почему поле мощности читается, но не используется
+
+В парсере стоит:
+
+```python
+frequency_hz, _power_level_centidecibels_milliwatt, point_index = struct.unpack_from(
+    "<QhH", payload, 0
+)
+```
+
+Поле мощности в payload реально существует и стоит между частотой и номером
+точки, поэтому прочитать его необходимо, чтобы правильно достать `point_index`.
+Подчёркивание в имени — обычный питоновский признак «прочитали намеренно, но не
+используем».
+
+По смыслу оно не нужно: для сбора циклов достаточно частоты, индекса точки и
+массива отсчётов, а S-параметры считаются как отношение сигнала к опоре.
+К тому же развёртка идёт с фиксированной мощностью (`cdbm_excitation_start ==
+cdbm_excitation_stop`, `fixedPowerSetting = 1`), так что поле лишь дублирует
+уже известное из настройки.
+
+Понадобилось бы оно при переменной по частоте мощности, при логировании
+фактической мощности каждой точки или при проверке, что устройство
+действительно выдаёт ожидаемый профиль.
+
+## 8. Чего в драйвере сознательно нет
+
+- запроса `DeviceInfo` и проверки версии протокола устройства;
+- отладочного endpoint `0x82`;
+- пакетов калибровки, генератора, анализатора спектра;
+- `SetTrigger`/`ClearTrigger` — синхронизация настраивается полем `syncMode` в
+  `SweepSettings`, а сама петля триггера аппаратная.
+
+CRC входящих пакетов, в отличие от первой версии драйвера, **проверяется** —
+см. раздел 2.
+
+## 9. Карта модулей хоста
+
+| Файл | Роль |
+| --- | --- |
+| `librevna_driver/protocol/frame.py` | кадр: кодирование, разбор, CRC, ресинхронизация |
+| `librevna_multi_device_driver/protocol.py` | номера пакетов, сборка payload, парсер datapoint, поиск по дескриптору |
+| `librevna_multi_device_driver/transport.py` | USB bulk, приёмный поток, очередь, ожидание `Ack` |
+| `librevna_multi_device_driver/controller.py` | высокоуровневые команды: настроить развёртку, собрать циклы, остановить |
+| `librevna_multi_device_driver/cycle_collection.py` | сбор точек в полные циклы, нормировка в S-параметры, имена трасс |
+| `librevna_multi_device_driver/models.py` | `SweepConfiguration`, выходные каналы, ограничения стадий |

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/.gitignore

@@ -0,0 +1,15 @@
+*.s#*
+*.b#*
+*.log
+*.net
+*.op.raw
+*.raw
+*.vnafw
+*.aux
+*.log
+*.synctex.gz
+*.xcf
+*.out
+*.toc
+*.pyc
+Hardware/Renderings

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/AssembleFirmware.py

@@ -0,0 +1,118 @@
+#!/usr/bin/env python3
+
+import argparse
+import binascii
+from pathlib import Path
+
+
+DEFAULT_FPGA_BITSTREAM = "FPGA/VNA/top.bin"
+DEFAULT_OUTPUT = "combined.vnafw"
+DEFAULT_MCU_CANDIDATES = [
+    "Software/VNA_embedded/Debug/VNA_embedded.bin",
+    "Software/VNA_embedded/Release/VNA_embedded.bin",
+    "Software/VNA_embedded/build/VNA_embedded.bin",
+]
+
+HEADER_SIZE = 24
+
+
+def parse_args() -> argparse.Namespace:
+    parser = argparse.ArgumentParser(
+        description="Assemble a combined LibreVNA firmware image.",
+    )
+    parser.add_argument(
+        "--bitstream",
+        default=DEFAULT_FPGA_BITSTREAM,
+        help=f"FPGA bitstream to package (default: {DEFAULT_FPGA_BITSTREAM})",
+    )
+    parser.add_argument(
+        "--output",
+        default=DEFAULT_OUTPUT,
+        help=f"Output firmware image path (default: {DEFAULT_OUTPUT})",
+    )
+    parser.add_argument(
+        "--mcu",
+        help="Explicit MCU firmware .bin path. If omitted, the newest known build is used.",
+    )
+    return parser.parse_args()
+
+
+def select_mcu_firmware(explicit_path: str | None) -> Path:
+    if explicit_path is not None:
+        path = Path(explicit_path)
+        if not path.is_file():
+            raise FileNotFoundError(f"MCU firmware not found: {path}")
+        return path
+
+    latest_modification = 0.0
+    newest_mcu: Path | None = None
+    for candidate in DEFAULT_MCU_CANDIDATES:
+        path = Path(candidate)
+        if not path.is_file():
+            continue
+        modified_time = path.stat().st_mtime
+        if modified_time >= latest_modification:
+            latest_modification = modified_time
+            newest_mcu = path
+
+    if newest_mcu is None:
+        raise FileNotFoundError("Couldn't find MCU firmware file")
+    return newest_mcu
+
+
+def crc32_from_file(filename: Path, initial_crc: int) -> int:
+    buffer = filename.read_bytes()
+    return binascii.crc32(buffer, initial_crc) & 0xFFFFFFFF
+
+
+def main() -> int:
+    args = parse_args()
+
+    bitstream_path = Path(args.bitstream)
+    if not bitstream_path.is_file():
+        raise FileNotFoundError(f"FPGA bitstream not found: {bitstream_path}")
+
+    mcu_firmware_path = select_mcu_firmware(args.mcu)
+    output_path = Path(args.output)
+
+    print(f"Using {mcu_firmware_path} as MCU firmware")
+
+    size_fpga = bitstream_path.stat().st_size
+    size_mcu = mcu_firmware_path.stat().st_size
+    print(f"Got FPGA bitstream of size {size_fpga}")
+    print(f"Got MCU firmware of size {size_mcu}")
+
+    crc = crc32_from_file(bitstream_path, 0xFFFFFFFF)
+    crc = crc32_from_file(mcu_firmware_path, crc)
+    print(f"Calculating CRC...:{hex(crc)}")
+
+    output_path.parent.mkdir(parents=True, exist_ok=True)
+    with output_path.open("wb") as firmware_image:
+        firmware_image.write(b"VNA!")
+        firmware_image.write((HEADER_SIZE).to_bytes(4, byteorder="little"))
+        firmware_image.write(size_fpga.to_bytes(4, byteorder="little"))
+        firmware_image.write((HEADER_SIZE + size_fpga).to_bytes(4, byteorder="little"))
+        firmware_image.write(size_mcu.to_bytes(4, byteorder="little"))
+        firmware_image.write(crc.to_bytes(4, byteorder="little"))
+
+        if firmware_image.tell() != HEADER_SIZE:
+            raise RuntimeError(
+                "Incorrect header size "
+                f"(defined as {HEADER_SIZE} but actual header is {firmware_image.tell()})"
+            )
+
+        firmware_image.write(bitstream_path.read_bytes())
+        firmware_image.write(mcu_firmware_path.read_bytes())
+
+        if firmware_image.tell() % 256 != 0:
+            padding = 256 - firmware_image.tell() % 256
+            firmware_image.write(bytearray(padding))
+
+        final_size = firmware_image.tell()
+
+    print(f"Created combined firmware file at {output_path} with size {final_size}")
+    return 0
+
+
+if __name__ == "__main__":
+    raise SystemExit(main())

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/.gitignore

@@ -0,0 +1,12 @@
+*
+!.gitignore
+!*/
+!*.vhd
+!*.ucf
+!*.ipf
+!*.gise
+!*.xise
+!*.py
+!*.bin
+!VNA/*.dat
+

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/AMAttenuationCalculator.py

@@ -0,0 +1,45 @@
+#!/usr/bin/env python3
+
+import math
+
+# Adapt these constants to the step attenuator
+BITS_OF_ATTENUATION = 7
+LSB_ATTENUATOR_DB = 0.25
+NUMBER_LINEAR_ATTENUATION_STEPS = 128
+
+file = open("AMdepth.dat", "w")
+
+def bindigits(n, bits):
+    s = bin(n & int("1"*bits, 2))[2:]
+    return ("{0:0>%s}" % (bits)).format(s)
+
+for i in range(NUMBER_LINEAR_ATTENUATION_STEPS):
+	# calculate percentage of attenuation
+	percent = float(i) / (NUMBER_LINEAR_ATTENUATION_STEPS - 1)
+	# calculate attenuation in dB
+	if percent < 1:
+		required_dB = -20*math.log10(1 - percent)
+	else:
+		required_dB = 999
+	# round to attenuator steps
+	attenuator_dB = round(required_dB / LSB_ATTENUATOR_DB) * LSB_ATTENUATOR_DB
+	# convert to digital attenuator value
+	attenuator_step = int(attenuator_dB / LSB_ATTENUATOR_DB)
+	# constrain
+	if attenuator_step < 0:
+		attenuator_step = 0
+	elif attenuator_step >= pow(2, BITS_OF_ATTENUATION):
+		attenuator_step = pow(2, BITS_OF_ATTENUATION) - 1
+	output = bindigits(attenuator_step, BITS_OF_ATTENUATION)
+	file.write(output+"\n")
+	
+	# Calculate actual attenuation
+	actual_dB = attenuator_step * LSB_ATTENUATOR_DB
+	actual_percent = 1 - pow(10, -actual_dB/20)
+	
+	percent_desired = round(percent*100, 2)
+	percent_actual = round(actual_percent*100, 2)
+	
+	print(f'Target modulation: {percent_desired:.2f}, target dB: {required_dB:.2f}, attenuator setting: {attenuator_step}, achieved dB: {actual_dB}, achieved modulation: {percent_actual:.2f}')
+
+file.close()

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/AMMult.gise

@@ -0,0 +1,53 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<generated_project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
+
+  <!--                                                          -->
+
+  <!--             For tool use only. Do not edit.              -->
+
+  <!--                                                          -->
+
+  <!-- ProjectNavigator created generated project file.         -->
+
+  <!-- For use in tracking generated file and other information -->
+
+  <!-- allowing preservation of process status.                 -->
+
+  <!--                                                          -->
+
+  <!-- Copyright (c) 1995-2013 Xilinx, Inc.  All rights reserved. -->
+
+  <version xmlns="http://www.xilinx.com/XMLSchema">11.1</version>
+
+  <sourceproject xmlns="http://www.xilinx.com/XMLSchema" xil_pn:fileType="FILE_XISE" xil_pn:name="AMMult.xise"/>
+
+  <files xmlns="http://www.xilinx.com/XMLSchema">
+    <file xil_pn:fileType="FILE_ASY" xil_pn:name="AMMult.asy" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_SYMBOL" xil_pn:name="AMMult.sym" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_VHO" xil_pn:name="AMMult.vho" xil_pn:origination="imported"/>
+  </files>
+
+  <transforms xmlns="http://www.xilinx.com/XMLSchema">
+    <transform xil_pn:end_ts="1654646662" xil_pn:name="TRAN_copyInitialToXSTAbstractSynthesis" xil_pn:start_ts="1654646662">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_schematicsToHdl" xil_pn:prop_ck="-4873039598653988690" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_regenerateCores" xil_pn:prop_ck="1388655879939993469" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_SubProjectAbstractToPreProxy" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_xawsTohdl" xil_pn:prop_ck="-8697384035118631440" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+  </transforms>
+
+</generated_project>

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/AMMult.vhd

@@ -0,0 +1,102 @@
+--------------------------------------------------------------------------------
+--    This file is owned and controlled by Xilinx and must be used solely     --
+--    for design, simulation, implementation and creation of design files     --
+--    limited to Xilinx devices or technologies. Use with non-Xilinx          --
+--    devices or technologies is expressly prohibited and immediately         --
+--    terminates your license.                                                --
+--                                                                            --
+--    XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" SOLELY    --
+--    FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR XILINX DEVICES.  BY    --
+--    PROVIDING THIS DESIGN, CODE, OR INFORMATION AS ONE POSSIBLE             --
+--    IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, XILINX IS      --
+--    MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE FROM ANY      --
+--    CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING ANY       --
+--    RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY       --
+--    DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE   --
+--    IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR          --
+--    REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF         --
+--    INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A   --
+--    PARTICULAR PURPOSE.                                                     --
+--                                                                            --
+--    Xilinx products are not intended for use in life support appliances,    --
+--    devices, or systems.  Use in such applications are expressly            --
+--    prohibited.                                                             --
+--                                                                            --
+--    (c) Copyright 1995-2022 Xilinx, Inc.                                    --
+--    All rights reserved.                                                    --
+--------------------------------------------------------------------------------
+--------------------------------------------------------------------------------
+-- You must compile the wrapper file AMMult.vhd when simulating
+-- the core, AMMult. When compiling the wrapper file, be sure to
+-- reference the XilinxCoreLib VHDL simulation library. For detailed
+-- instructions, please refer to the "CORE Generator Help".
+
+-- The synthesis directives "translate_off/translate_on" specified
+-- below are supported by Xilinx, Mentor Graphics and Synplicity
+-- synthesis tools. Ensure they are correct for your synthesis tool(s).
+
+LIBRARY ieee;
+USE ieee.std_logic_1164.ALL;
+-- synthesis translate_off
+LIBRARY XilinxCoreLib;
+-- synthesis translate_on
+ENTITY AMMult IS
+  PORT (
+    clk : IN STD_LOGIC;
+    a : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    b : IN STD_LOGIC_VECTOR(6 DOWNTO 0);
+    ce : IN STD_LOGIC;
+    p : OUT STD_LOGIC_VECTOR(14 DOWNTO 0)
+  );
+END AMMult;
+
+ARCHITECTURE AMMult_a OF AMMult IS
+-- synthesis translate_off
+COMPONENT wrapped_AMMult
+  PORT (
+    clk : IN STD_LOGIC;
+    a : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    b : IN STD_LOGIC_VECTOR(6 DOWNTO 0);
+    ce : IN STD_LOGIC;
+    p : OUT STD_LOGIC_VECTOR(14 DOWNTO 0)
+  );
+END COMPONENT;
+
+-- Configuration specification
+  FOR ALL : wrapped_AMMult USE ENTITY XilinxCoreLib.mult_gen_v11_2(behavioral)
+    GENERIC MAP (
+      c_a_type => 1,
+      c_a_width => 8,
+      c_b_type => 1,
+      c_b_value => "10000001",
+      c_b_width => 7,
+      c_ccm_imp => 0,
+      c_ce_overrides_sclr => 0,
+      c_has_ce => 1,
+      c_has_sclr => 0,
+      c_has_zero_detect => 0,
+      c_latency => 1,
+      c_model_type => 0,
+      c_mult_type => 1,
+      c_optimize_goal => 1,
+      c_out_high => 14,
+      c_out_low => 0,
+      c_round_output => 0,
+      c_round_pt => 0,
+      c_verbosity => 0,
+      c_xdevicefamily => "spartan6"
+    );
+-- synthesis translate_on
+BEGIN
+-- synthesis translate_off
+U0 : wrapped_AMMult
+  PORT MAP (
+    clk => clk,
+    a => a,
+    b => b,
+    ce => ce,
+    p => p
+  );
+-- synthesis translate_on
+
+END AMMult_a;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/DFT_CLK.gise

@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<generated_project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
+
+  <!--                                                          -->
+
+  <!--             For tool use only. Do not edit.              -->
+
+  <!--                                                          -->
+
+  <!-- ProjectNavigator created generated project file.         -->
+
+  <!-- For use in tracking generated file and other information -->
+
+  <!-- allowing preservation of process status.                 -->
+
+  <!--                                                          -->
+
+  <!-- Copyright (c) 1995-2013 Xilinx, Inc.  All rights reserved. -->
+
+  <version xmlns="http://www.xilinx.com/XMLSchema">11.1</version>
+
+  <sourceproject xmlns="http://www.xilinx.com/XMLSchema" xil_pn:fileType="FILE_XISE" xil_pn:name="DFT_CLK.xise"/>
+
+  <files xmlns="http://www.xilinx.com/XMLSchema">
+    <file xil_pn:fileType="FILE_ASY" xil_pn:name="DFT_CLK.asy" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_VHO" xil_pn:name="DFT_CLK.vho" xil_pn:origination="imported"/>
+  </files>
+
+  <transforms xmlns="http://www.xilinx.com/XMLSchema"/>
+
+</generated_project>

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/DFT_CLK.ucf

@@ -0,0 +1,59 @@
+# file: DFT_CLK.ucf
+# 
+# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+# 
+# This file contains confidential and proprietary information
+# of Xilinx, Inc. and is protected under U.S. and
+# international copyright and other intellectual property
+# laws.
+# 
+# DISCLAIMER
+# This disclaimer is not a license and does not grant any
+# rights to the materials distributed herewith. Except as
+# otherwise provided in a valid license issued to you by
+# Xilinx, and to the maximum extent permitted by applicable
+# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+# (2) Xilinx shall not be liable (whether in contract or tort,
+# including negligence, or under any other theory of
+# liability) for any loss or damage of any kind or nature
+# related to, arising under or in connection with these
+# materials, including for any direct, or any indirect,
+# special, incidental, or consequential loss or damage
+# (including loss of data, profits, goodwill, or any type of
+# loss or damage suffered as a result of any action brought
+# by a third party) even if such damage or loss was
+# reasonably foreseeable or Xilinx had been advised of the
+# possibility of the same.
+# 
+# CRITICAL APPLICATIONS
+# Xilinx products are not designed or intended to be fail-
+# safe, or for use in any application requiring fail-safe
+# performance, such as life-support or safety devices or
+# systems, Class III medical devices, nuclear facilities,
+# applications related to the deployment of airbags, or any
+# other applications that could lead to death, personal
+# injury, or severe property or environmental damage
+# (individually and collectively, "Critical
+# Applications"). Customer assumes the sole risk and
+# liability of any use of Xilinx products in Critical
+# Applications, subject only to applicable laws and
+# regulations governing limitations on product liability.
+# 
+# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+# PART OF THIS FILE AT ALL TIMES.
+# 
+
+# Input clock periods. These duplicate the values entered for the
+#  input clocks. You can use these to time your system
+#----------------------------------------------------------------
+NET "CLK_IN1" TNM_NET = "CLK_IN1";
+TIMESPEC "TS_CLK_IN1" = PERIOD "CLK_IN1" 62.5 ns HIGH 50% INPUT_JITTER 625.0ps;
+
+
+# FALSE PATH constraints 
+PIN "RESET" TIG;
+

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/DFT_CLK.vhd

@@ -0,0 +1,169 @@
+-- file: DFT_CLK.vhd
+-- 
+-- (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+-- 
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+-- 
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+-- 
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+-- 
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+-- 
+------------------------------------------------------------------------------
+-- User entered comments
+------------------------------------------------------------------------------
+-- None
+--
+------------------------------------------------------------------------------
+-- "Output    Output      Phase     Duty      Pk-to-Pk        Phase"
+-- "Clock    Freq (MHz) (degrees) Cycle (%) Jitter (ps)  Error (ps)"
+------------------------------------------------------------------------------
+-- CLK_OUT1___160.000______0.000______50.0______336.927____150.000
+--
+------------------------------------------------------------------------------
+-- "Input Clock   Freq (MHz)    Input Jitter (UI)"
+------------------------------------------------------------------------------
+-- __primary______________16____________0.010
+
+library ieee;
+use ieee.std_logic_1164.all;
+use ieee.std_logic_unsigned.all;
+use ieee.std_logic_arith.all;
+use ieee.numeric_std.all;
+
+library unisim;
+use unisim.vcomponents.all;
+
+entity DFT_CLK is
+port
+ (-- Clock in ports
+  CLK_IN1           : in     std_logic;
+  -- Clock out ports
+  CLK_OUT1          : out    std_logic;
+  -- Status and control signals
+  RESET             : in     std_logic;
+  LOCKED            : out    std_logic
+ );
+end DFT_CLK;
+
+architecture xilinx of DFT_CLK is
+  attribute CORE_GENERATION_INFO : string;
+  attribute CORE_GENERATION_INFO of xilinx : architecture is "DFT_CLK,clk_wiz_v3_6,{component_name=DFT_CLK,use_phase_alignment=true,use_min_o_jitter=false,use_max_i_jitter=false,use_dyn_phase_shift=false,use_inclk_switchover=false,use_dyn_reconfig=false,feedback_source=FDBK_AUTO,primtype_sel=DCM_SP,num_out_clk=1,clkin1_period=62.5,clkin2_period=62.5,use_power_down=false,use_reset=true,use_locked=true,use_inclk_stopped=false,use_status=false,use_freeze=false,use_clk_valid=false,feedback_type=SINGLE,clock_mgr_type=AUTO,manual_override=false}";
+	  -- Input clock buffering / unused connectors
+  signal clkin1            : std_logic;
+  -- Output clock buffering
+  signal clkfb             : std_logic;
+  signal clk0              : std_logic;
+  signal clkfx             : std_logic;
+  signal clkfbout          : std_logic;
+  signal locked_internal   : std_logic;
+  signal status_internal   : std_logic_vector(7 downto 0);
+begin
+
+
+  -- Input buffering
+  --------------------------------------
+  clkin1 <= CLK_IN1;
+
+
+  -- Clocking primitive
+  --------------------------------------
+  
+  -- Instantiation of the DCM primitive
+  --    * Unused inputs are tied off
+  --    * Unused outputs are labeled unused
+  dcm_sp_inst: DCM_SP
+  generic map
+   (CLKDV_DIVIDE          => 2.000,
+    CLKFX_DIVIDE          => 1,
+    CLKFX_MULTIPLY        => 10,
+    CLKIN_DIVIDE_BY_2     => FALSE,
+    CLKIN_PERIOD          => 62.5,
+    CLKOUT_PHASE_SHIFT    => "NONE",
+    CLK_FEEDBACK          => "1X",
+    DESKEW_ADJUST         => "SYSTEM_SYNCHRONOUS",
+    PHASE_SHIFT           => 0,
+    STARTUP_WAIT          => FALSE)
+  port map
+   -- Input clock
+   (CLKIN                 => clkin1,
+    CLKFB                 => clkfb,
+    -- Output clocks
+    CLK0                  => clk0,
+    CLK90                 => open,
+    CLK180                => open,
+    CLK270                => open,
+    CLK2X                 => open,
+    CLK2X180              => open,
+    CLKFX                 => clkfx,
+    CLKFX180              => open,
+    CLKDV                 => open,
+   -- Ports for dynamic phase shift
+    PSCLK                 => '0',
+    PSEN                  => '0',
+    PSINCDEC              => '0',
+    PSDONE                => open,
+   -- Other control and status signals
+    LOCKED                => locked_internal,
+    STATUS                => status_internal,
+    RST                   => RESET,
+   -- Unused pin, tie low
+    DSSEN                 => '0');
+
+  LOCKED                <= locked_internal;
+
+
+
+  -- Output buffering
+  -------------------------------------
+  clkf_buf : BUFG
+  port map
+   (O => clkfb,
+    I => clk0);
+
+
+  clkout1_buf : BUFG
+  port map
+   (O   => CLK_OUT1,
+    I   => clkfx);
+
+
+
+end xilinx;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/DFT_CLK/example_design/DFT_CLK_exdes.ucf

@@ -0,0 +1,60 @@
+# file: DFT_CLK_exdes.ucf
+# 
+# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+# 
+# This file contains confidential and proprietary information
+# of Xilinx, Inc. and is protected under U.S. and
+# international copyright and other intellectual property
+# laws.
+# 
+# DISCLAIMER
+# This disclaimer is not a license and does not grant any
+# rights to the materials distributed herewith. Except as
+# otherwise provided in a valid license issued to you by
+# Xilinx, and to the maximum extent permitted by applicable
+# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+# (2) Xilinx shall not be liable (whether in contract or tort,
+# including negligence, or under any other theory of
+# liability) for any loss or damage of any kind or nature
+# related to, arising under or in connection with these
+# materials, including for any direct, or any indirect,
+# special, incidental, or consequential loss or damage
+# (including loss of data, profits, goodwill, or any type of
+# loss or damage suffered as a result of any action brought
+# by a third party) even if such damage or loss was
+# reasonably foreseeable or Xilinx had been advised of the
+# possibility of the same.
+# 
+# CRITICAL APPLICATIONS
+# Xilinx products are not designed or intended to be fail-
+# safe, or for use in any application requiring fail-safe
+# performance, such as life-support or safety devices or
+# systems, Class III medical devices, nuclear facilities,
+# applications related to the deployment of airbags, or any
+# other applications that could lead to death, personal
+# injury, or severe property or environmental damage
+# (individually and collectively, "Critical
+# Applications"). Customer assumes the sole risk and
+# liability of any use of Xilinx products in Critical
+# Applications, subject only to applicable laws and
+# regulations governing limitations on product liability.
+# 
+# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+# PART OF THIS FILE AT ALL TIMES.
+# 
+
+# Input clock periods. These duplicate the values entered for the
+#  input clocks. You can use these to time your system
+#----------------------------------------------------------------
+NET "CLK_IN1" TNM_NET = "CLK_IN1";
+TIMESPEC "TS_CLK_IN1" = PERIOD "CLK_IN1" 62.5 ns HIGH 50% INPUT_JITTER 625.0ps;
+
+
+# FALSE PATH constraints 
+PIN "COUNTER_RESET" TIG;
+PIN "RESET" TIG;
+

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/DFT_CLK/example_design/DFT_CLK_exdes.vhd

@@ -0,0 +1,192 @@
+-- file: DFT_CLK_exdes.vhd
+-- 
+-- (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+-- 
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+-- 
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+-- 
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+-- 
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+-- 
+
+------------------------------------------------------------------------------
+-- Clocking wizard example design
+------------------------------------------------------------------------------
+-- This example design instantiates the created clocking network, where each
+--   output clock drives a counter. The high bit of each counter is ported.
+------------------------------------------------------------------------------
+
+library ieee;
+use ieee.std_logic_1164.all;
+use ieee.std_logic_unsigned.all;
+use ieee.std_logic_arith.all;
+use ieee.numeric_std.all;
+
+library unisim;
+use unisim.vcomponents.all;
+
+entity DFT_CLK_exdes is
+generic (
+  TCQ               : in time := 100 ps);
+port
+ (-- Clock in ports
+  CLK_IN1           : in  std_logic;
+  -- Reset that only drives logic in example design
+  COUNTER_RESET     : in  std_logic;
+  CLK_OUT           : out std_logic_vector(1 downto 1) ;
+  -- High bits of counters driven by clocks
+  COUNT             : out std_logic;
+  -- Status and control signals
+  RESET             : in  std_logic;
+  LOCKED            : out std_logic
+ );
+end DFT_CLK_exdes;
+
+architecture xilinx of DFT_CLK_exdes is
+
+  -- Parameters for the counters
+  ---------------------------------
+  -- Counter width
+  constant C_W        : integer := 16;
+
+
+  -- When the clock goes out of lock, reset the counters
+  signal   locked_int : std_logic;
+  signal   reset_int  : std_logic                     := '0';
+
+  -- Declare the clocks and counter
+  signal   clk        : std_logic;
+  signal   clk_int    : std_logic;
+  signal   clk_n  : std_logic;
+  signal   counter    : std_logic_vector(C_W-1 downto 0) := (others => '0');
+
+  -- Need to buffer input clocks that aren't already buffered
+  signal   clk_in1_buf : std_logic;
+  signal rst_sync : std_logic;
+  signal rst_sync_int : std_logic;
+  signal rst_sync_int1 : std_logic;
+  signal rst_sync_int2 : std_logic;
+
+
+component DFT_CLK is
+port
+ (-- Clock in ports
+  CLK_IN1           : in     std_logic;
+  -- Clock out ports
+  CLK_OUT1          : out    std_logic;
+  -- Status and control signals
+  RESET             : in     std_logic;
+  LOCKED            : out    std_logic
+ );
+end component;
+
+begin
+  -- Alias output to internally used signal
+  LOCKED    <= locked_int;
+
+  -- When the clock goes out of lock, reset the counters
+  reset_int <= (not locked_int) or RESET or COUNTER_RESET;
+
+
+ process (clk, reset_int) begin
+   if (reset_int = '1') then
+       rst_sync <= '1';
+       rst_sync_int <= '1';
+       rst_sync_int1 <= '1';
+       rst_sync_int2 <= '1';
+   elsif (clk 'event and clk='1') then
+       rst_sync <= '0';
+       rst_sync_int <= rst_sync;
+       rst_sync_int1 <= rst_sync_int;
+       rst_sync_int2 <= rst_sync_int1;
+   end if;
+ end process;
+
+
+  -- Insert BUFGs on all input clocks that don't already have them
+  ----------------------------------------------------------------
+  clkin1_buf : BUFG
+  port map
+   (O => clk_in1_buf,
+    I => CLK_IN1);
+
+  -- Instantiation of the clocking network
+  ----------------------------------------
+  clknetwork : DFT_CLK
+  port map
+   (-- Clock in ports
+    CLK_IN1            => clk_in1_buf,
+    -- Clock out ports
+    CLK_OUT1           => clk_int,
+    -- Status and control signals
+    RESET              => RESET,
+    LOCKED             => locked_int);
+
+  clk_n <= not clk;
+  clkout_oddr : ODDR2
+  port map
+   (Q  => CLK_OUT(1),
+    C0 => clk,
+    C1 => clk_n,
+    CE => '1',
+    D0 => '1',
+    D1 => '0',
+    R  => '0',
+    S  => '0');
+
+  -- Connect the output clocks to the design
+  -------------------------------------------
+  clk <= clk_int;
+
+  -- Output clock sampling
+  -------------------------------------
+  process (clk, rst_sync_int2) begin
+      if (rst_sync_int2 = '1') then
+        counter <= (others => '0') after TCQ;
+      elsif (rising_edge(clk)) then
+        counter <= counter + 1 after TCQ;
+      end if;
+  end process;
+  -- alias the high bit to the output
+  COUNT <= counter(C_W-1);
+
+
+end xilinx;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/DFT_CLK/simulation/DFT_CLK_tb.vhd

@@ -0,0 +1,197 @@
+-- file: DFT_CLK_tb.vhd
+-- 
+-- (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+-- 
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+-- 
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+-- 
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+-- 
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+-- 
+
+------------------------------------------------------------------------------
+-- Clocking wizard demonstration testbench
+------------------------------------------------------------------------------
+-- This demonstration testbench instantiates the example design for the 
+--   clocking wizard. Input clocks are toggled, which cause the clocking
+--   network to lock and the counters to increment.
+------------------------------------------------------------------------------
+
+library ieee;
+use ieee.std_logic_1164.all;
+use ieee.std_logic_unsigned.all;
+use ieee.std_logic_arith.all;
+use ieee.numeric_std.all;
+use ieee.std_logic_textio.all;
+
+library std;
+use std.textio.all;
+
+library work;
+use work.all;
+
+entity DFT_CLK_tb is
+end DFT_CLK_tb;
+
+architecture test of DFT_CLK_tb is
+
+  -- Clock to Q delay of 100 ps
+  constant TCQ               : time := 100 ps;
+  -- timescale is 1ps
+  constant ONE_NS      : time := 1 ns;
+  -- how many cycles to run
+  constant COUNT_PHASE : integer := 1024 + 1;
+
+
+  -- we'll be using the period in many locations
+  constant PER1        : time := 62.5 ns;
+
+
+  -- Declare the input clock signals
+  signal CLK_IN1       : std_logic := '1';
+  -- The high bit of the sampling counter
+  signal COUNT         : std_logic;
+  -- Status and control signals
+  signal RESET         : std_logic := '0';
+  signal LOCKED        : std_logic;
+  signal COUNTER_RESET : std_logic := '0';
+--  signal defined to stop mti simulation without severity failure in the report
+  signal end_of_sim : std_logic := '0';
+  signal CLK_OUT : std_logic_vector(1 downto 1);
+--Freq Check using the M & D values setting and actual Frequency generated
+
+component DFT_CLK_exdes
+generic (
+  TCQ               : in time := 100 ps);
+port
+ (-- Clock in ports
+  CLK_IN1           : in  std_logic;
+  -- Reset that only drives logic in example design
+  COUNTER_RESET     : in  std_logic;
+  CLK_OUT           : out std_logic_vector(1 downto 1) ;
+  -- High bits of counters driven by clocks
+  COUNT             : out std_logic;
+  -- Status and control signals
+  RESET             : in  std_logic;
+  LOCKED            : out std_logic
+ );
+end component;
+
+begin
+
+  -- Input clock generation
+  --------------------------------------
+  process begin
+    CLK_IN1 <= not CLK_IN1; wait for (PER1/2);
+  end process;
+
+  -- Test sequence
+  process 
+
+    procedure simtimeprint is
+      variable outline : line;
+    begin
+      write(outline, string'("## SYSTEM_CYCLE_COUNTER "));
+      write(outline, NOW/PER1);
+      write(outline, string'(" ns"));
+      writeline(output,outline);
+    end simtimeprint;
+
+    procedure simfreqprint (period : time; clk_num : integer) is
+       variable outputline : LINE;
+       variable str1 : string(1 to 16);
+       variable str2 : integer;
+       variable str3 : string(1 to 2);
+       variable str4 : integer;
+       variable str5 : string(1 to 4);
+    begin
+       str1 := "Freq of CLK_OUT(";
+       str2 :=  clk_num;
+       str3 :=  ") ";
+       str4 :=  1000000 ps/period ;
+       str5 :=  " MHz" ;
+       write(outputline, str1 );
+       write(outputline, str2);
+       write(outputline, str3);
+       write(outputline, str4);
+       write(outputline, str5);
+       writeline(output, outputline);
+    end simfreqprint;
+
+  begin
+    RESET      <= '1';
+    wait for (PER1*6);
+    RESET      <= '0';
+    wait until LOCKED = '1';
+    COUNTER_RESET <= '1';
+    wait for (PER1*20);
+    COUNTER_RESET <= '0';
+    wait for (PER1*COUNT_PHASE);
+
+
+    simtimeprint;
+    end_of_sim <= '1';
+    wait for 1 ps;
+    report "Simulation Stopped." severity failure;
+    wait;
+  end process;
+
+  -- Instantiation of the example design containing the clock
+  --    network and sampling counters
+  -----------------------------------------------------------
+  dut : DFT_CLK_exdes
+  generic map (
+    TCQ                => TCQ)
+  port map
+   (-- Clock in ports
+    CLK_IN1            => CLK_IN1,
+    -- Reset for logic in example design
+    COUNTER_RESET      => COUNTER_RESET,
+    CLK_OUT            => CLK_OUT,
+    -- High bits of the counters
+    COUNT              => COUNT,
+    -- Status and control signals
+    RESET              => RESET,
+    LOCKED             => LOCKED);
+
+-- Freq Check 
+
+end test;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/DFT_CLK/simulation/timing/DFT_CLK_tb.vhd

@@ -0,0 +1,220 @@
+-- file: DFT_CLK_tb.vhd
+-- 
+-- (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+-- 
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+-- 
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+-- 
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+-- 
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+-- 
+
+------------------------------------------------------------------------------
+-- Clocking wizard demonstration testbench
+------------------------------------------------------------------------------
+-- This demonstration testbench instantiates the example design for the 
+--   clocking wizard. Input clocks are toggled, which cause the clocking
+--   network to lock and the counters to increment.
+------------------------------------------------------------------------------
+
+library ieee;
+use ieee.std_logic_1164.all;
+use ieee.std_logic_unsigned.all;
+use ieee.std_logic_arith.all;
+use ieee.numeric_std.all;
+use ieee.std_logic_textio.all;
+
+library std;
+use std.textio.all;
+
+library work;
+use work.all;
+
+entity DFT_CLK_tb is
+end DFT_CLK_tb;
+
+architecture test of DFT_CLK_tb is
+
+  -- Clock to Q delay of 100 ps
+  constant TCQ               : time := 100 ps;
+  -- timescale is 1ps
+  constant ONE_NS      : time := 1 ns;
+  -- how many cycles to run
+  constant COUNT_PHASE : integer := 1024 + 1;
+
+
+  -- we'll be using the period in many locations
+  constant PER1        : time := 62.5 ns;
+
+
+  -- Declare the input clock signals
+  signal CLK_IN1       : std_logic := '1';
+  -- The high bit of the sampling counter
+  signal COUNT         : std_logic;
+  -- Status and control signals
+  signal RESET         : std_logic := '0';
+  signal LOCKED        : std_logic;
+  signal COUNTER_RESET : std_logic := '0';
+  signal timeout_counter : std_logic_vector (13 downto 0) := (others => '0');
+--  signal defined to stop mti simulation without severity failure in the report
+  signal end_of_sim : std_logic := '0';
+  signal CLK_OUT : std_logic_vector(1 downto 1);
+--Freq Check using the M & D values setting and actual Frequency generated
+
+component DFT_CLK_exdes
+port
+ (-- Clock in ports
+  CLK_IN1           : in  std_logic;
+  -- Reset that only drives logic in example design
+  COUNTER_RESET     : in  std_logic;
+  CLK_OUT           : out std_logic_vector(1 downto 1) ;
+  -- High bits of counters driven by clocks
+  COUNT             : out std_logic;
+  -- Status and control signals
+  RESET             : in  std_logic;
+  LOCKED            : out std_logic
+ );
+end component;
+
+begin
+
+  -- Input clock generation
+  --------------------------------------
+  process begin
+    CLK_IN1 <= not CLK_IN1; wait for (PER1/2);
+  end process;
+
+  -- Test sequence
+  process 
+
+    procedure simtimeprint is
+      variable outline : line;
+    begin
+      write(outline, string'("## SYSTEM_CYCLE_COUNTER "));
+      write(outline, NOW/PER1);
+      write(outline, string'(" ns"));
+      writeline(output,outline);
+    end simtimeprint;
+
+    procedure simfreqprint (period : time; clk_num : integer) is
+       variable outputline : LINE;
+       variable str1 : string(1 to 16);
+       variable str2 : integer;
+       variable str3 : string(1 to 2);
+       variable str4 : integer;
+       variable str5 : string(1 to 4);
+    begin
+       str1 := "Freq of CLK_OUT(";
+       str2 :=  clk_num;
+       str3 :=  ") ";
+       str4 :=  1000000 ps/period ;
+       str5 :=  " MHz" ;
+       write(outputline, str1 );
+       write(outputline, str2);
+       write(outputline, str3);
+       write(outputline, str4);
+       write(outputline, str5);
+       writeline(output, outputline);
+    end simfreqprint;
+
+  begin
+   report "Timing checks are not valid" severity note;
+    RESET      <= '1';
+    wait for (PER1*6);
+    RESET      <= '0';
+    wait until LOCKED = '1';
+    wait for (PER1*20);
+    COUNTER_RESET <= '1';
+    wait for (PER1*19.5);
+    COUNTER_RESET <= '0';
+    wait for (PER1*1);
+    report "Timing checks are valid" severity note;
+    wait for (PER1*COUNT_PHASE);
+
+
+    simtimeprint;
+    end_of_sim <= '1';
+    wait for 1 ps;
+    report "Simulation Stopped." severity failure;
+    wait;
+  end process;
+
+ process (CLK_IN1)
+    procedure simtimeprint is
+      variable outline : line;
+    begin
+      write(outline, string'("## SYSTEM_CYCLE_COUNTER "));
+      write(outline, NOW/PER1);
+      write(outline, string'(" ns"));
+      writeline(output,outline);
+    end simtimeprint;
+   begin
+     if (CLK_IN1'event and CLK_IN1='1') then
+         timeout_counter <= timeout_counter + '1';
+       if (timeout_counter = "10000000000000") then
+          if (LOCKED /= '1') then
+            simtimeprint;
+            report "NO LOCK signal" severity failure;
+          end if;
+       end if;
+     end if;
+ end process; 
+
+
+  -- Instantiation of the example design containing the clock
+  --    network and sampling counters
+  -----------------------------------------------------------
+  dut : DFT_CLK_exdes
+  port map
+   (-- Clock in ports
+    CLK_IN1            => CLK_IN1,
+    -- Reset for logic in example design
+    COUNTER_RESET      => COUNTER_RESET,
+    CLK_OUT            => CLK_OUT,
+    -- High bits of the counters
+    COUNT              => COUNT,
+    -- Status and control signals
+    RESET              => RESET,
+    LOCKED             => LOCKED);
+
+-- Freq Check 
+
+end test;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/DSP48.gise

@@ -0,0 +1,32 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<generated_project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
+
+  <!--                                                          -->
+
+  <!--             For tool use only. Do not edit.              -->
+
+  <!--                                                          -->
+
+  <!-- ProjectNavigator created generated project file.         -->
+
+  <!-- For use in tracking generated file and other information -->
+
+  <!-- allowing preservation of process status.                 -->
+
+  <!--                                                          -->
+
+  <!-- Copyright (c) 1995-2013 Xilinx, Inc.  All rights reserved. -->
+
+  <version xmlns="http://www.xilinx.com/XMLSchema">11.1</version>
+
+  <sourceproject xmlns="http://www.xilinx.com/XMLSchema" xil_pn:fileType="FILE_XISE" xil_pn:name="DSP48.xise"/>
+
+  <files xmlns="http://www.xilinx.com/XMLSchema">
+    <file xil_pn:fileType="FILE_ASY" xil_pn:name="DSP48.asy" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_SYMBOL" xil_pn:name="DSP48.sym" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_VHO" xil_pn:name="DSP48.vho" xil_pn:origination="imported"/>
+  </files>
+
+  <transforms xmlns="http://www.xilinx.com/XMLSchema"/>
+
+</generated_project>

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/DSP48.vhd

@@ -0,0 +1,139 @@
+--------------------------------------------------------------------------------
+--    This file is owned and controlled by Xilinx and must be used solely     --
+--    for design, simulation, implementation and creation of design files     --
+--    limited to Xilinx devices or technologies. Use with non-Xilinx          --
+--    devices or technologies is expressly prohibited and immediately         --
+--    terminates your license.                                                --
+--                                                                            --
+--    XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" SOLELY    --
+--    FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR XILINX DEVICES.  BY    --
+--    PROVIDING THIS DESIGN, CODE, OR INFORMATION AS ONE POSSIBLE             --
+--    IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, XILINX IS      --
+--    MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE FROM ANY      --
+--    CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING ANY       --
+--    RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY       --
+--    DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE   --
+--    IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR          --
+--    REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF         --
+--    INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A   --
+--    PARTICULAR PURPOSE.                                                     --
+--                                                                            --
+--    Xilinx products are not intended for use in life support appliances,    --
+--    devices, or systems.  Use in such applications are expressly            --
+--    prohibited.                                                             --
+--                                                                            --
+--    (c) Copyright 1995-2020 Xilinx, Inc.                                    --
+--    All rights reserved.                                                    --
+--------------------------------------------------------------------------------
+--------------------------------------------------------------------------------
+-- You must compile the wrapper file DSP48.vhd when simulating
+-- the core, DSP48. When compiling the wrapper file, be sure to
+-- reference the XilinxCoreLib VHDL simulation library. For detailed
+-- instructions, please refer to the "CORE Generator Help".
+
+-- The synthesis directives "translate_off/translate_on" specified
+-- below are supported by Xilinx, Mentor Graphics and Synplicity
+-- synthesis tools. Ensure they are correct for your synthesis tool(s).
+
+LIBRARY ieee;
+USE ieee.std_logic_1164.ALL;
+-- synthesis translate_off
+LIBRARY XilinxCoreLib;
+-- synthesis translate_on
+ENTITY DSP48 IS
+  PORT (
+    clk : IN STD_LOGIC;
+    ce : IN STD_LOGIC;
+    sel : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    a : IN STD_LOGIC_VECTOR(17 DOWNTO 0);
+    b : IN STD_LOGIC_VECTOR(17 DOWNTO 0);
+    c : IN STD_LOGIC_VECTOR(47 DOWNTO 0);
+    p : OUT STD_LOGIC_VECTOR(47 DOWNTO 0)
+  );
+END DSP48;
+
+ARCHITECTURE DSP48_a OF DSP48 IS
+-- synthesis translate_off
+COMPONENT wrapped_DSP48
+  PORT (
+    clk : IN STD_LOGIC;
+    ce : IN STD_LOGIC;
+    sel : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    a : IN STD_LOGIC_VECTOR(17 DOWNTO 0);
+    b : IN STD_LOGIC_VECTOR(17 DOWNTO 0);
+    c : IN STD_LOGIC_VECTOR(47 DOWNTO 0);
+    p : OUT STD_LOGIC_VECTOR(47 DOWNTO 0)
+  );
+END COMPONENT;
+
+-- Configuration specification
+  FOR ALL : wrapped_DSP48 USE ENTITY XilinxCoreLib.xbip_dsp48_macro_v2_1(behavioral)
+    GENERIC MAP (
+      c_a_width => 18,
+      c_b_width => 18,
+      c_c_width => 48,
+      c_concat_width => 48,
+      c_constant_1 => 1,
+      c_d_width => 18,
+      c_has_a => 1,
+      c_has_acin => 0,
+      c_has_acout => 0,
+      c_has_b => 1,
+      c_has_bcin => 0,
+      c_has_bcout => 0,
+      c_has_c => 1,
+      c_has_carrycascin => 0,
+      c_has_carrycascout => 0,
+      c_has_carryin => 0,
+      c_has_carryout => 0,
+      c_has_ce => 1,
+      c_has_cea => 0,
+      c_has_ceb => 0,
+      c_has_cec => 0,
+      c_has_ceconcat => 0,
+      c_has_ced => 0,
+      c_has_cem => 0,
+      c_has_cep => 0,
+      c_has_cesel => 0,
+      c_has_concat => 0,
+      c_has_d => 0,
+      c_has_indep_ce => 0,
+      c_has_indep_sclr => 0,
+      c_has_pcin => 0,
+      c_has_pcout => 0,
+      c_has_sclr => 0,
+      c_has_sclra => 0,
+      c_has_sclrb => 0,
+      c_has_sclrc => 0,
+      c_has_sclrconcat => 0,
+      c_has_sclrd => 0,
+      c_has_sclrm => 0,
+      c_has_sclrp => 0,
+      c_has_sclrsel => 0,
+      c_latency => -1,
+      c_model_type => 0,
+      c_opmodes => "0000000000010000000,0000001100010000000",
+      c_p_lsb => 0,
+      c_p_msb => 47,
+      c_reg_config => "00000000000011100111100111100100",
+      c_sel_width => 1,
+      c_test_core => 0,
+      c_verbosity => 0,
+      c_xdevicefamily => "spartan6"
+    );
+-- synthesis translate_on
+BEGIN
+-- synthesis translate_off
+U0 : wrapped_DSP48
+  PORT MAP (
+    clk => clk,
+    ce => ce,
+    sel => sel,
+    a => a,
+    b => b,
+    c => c,
+    p => p
+  );
+-- synthesis translate_on
+
+END DSP48_a;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/DSP_SLICE.gise

@@ -0,0 +1,32 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<generated_project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
+
+  <!--                                                          -->
+
+  <!--             For tool use only. Do not edit.              -->
+
+  <!--                                                          -->
+
+  <!-- ProjectNavigator created generated project file.         -->
+
+  <!-- For use in tracking generated file and other information -->
+
+  <!-- allowing preservation of process status.                 -->
+
+  <!--                                                          -->
+
+  <!-- Copyright (c) 1995-2013 Xilinx, Inc.  All rights reserved. -->
+
+  <version xmlns="http://www.xilinx.com/XMLSchema">11.1</version>
+
+  <sourceproject xmlns="http://www.xilinx.com/XMLSchema" xil_pn:fileType="FILE_XISE" xil_pn:name="DSP_SLICE.xise"/>
+
+  <files xmlns="http://www.xilinx.com/XMLSchema">
+    <file xil_pn:fileType="FILE_ASY" xil_pn:name="DSP_SLICE.asy" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_SYMBOL" xil_pn:name="DSP_SLICE.sym" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_VHO" xil_pn:name="DSP_SLICE.vho" xil_pn:origination="imported"/>
+  </files>
+
+  <transforms xmlns="http://www.xilinx.com/XMLSchema"/>
+
+</generated_project>

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/DSP_SLICE.vhd

@@ -0,0 +1,139 @@
+--------------------------------------------------------------------------------
+--    This file is owned and controlled by Xilinx and must be used solely     --
+--    for design, simulation, implementation and creation of design files     --
+--    limited to Xilinx devices or technologies. Use with non-Xilinx          --
+--    devices or technologies is expressly prohibited and immediately         --
+--    terminates your license.                                                --
+--                                                                            --
+--    XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" SOLELY    --
+--    FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR XILINX DEVICES.  BY    --
+--    PROVIDING THIS DESIGN, CODE, OR INFORMATION AS ONE POSSIBLE             --
+--    IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, XILINX IS      --
+--    MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE FROM ANY      --
+--    CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING ANY       --
+--    RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY       --
+--    DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE   --
+--    IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR          --
+--    REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF         --
+--    INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A   --
+--    PARTICULAR PURPOSE.                                                     --
+--                                                                            --
+--    Xilinx products are not intended for use in life support appliances,    --
+--    devices, or systems.  Use in such applications are expressly            --
+--    prohibited.                                                             --
+--                                                                            --
+--    (c) Copyright 1995-2020 Xilinx, Inc.                                    --
+--    All rights reserved.                                                    --
+--------------------------------------------------------------------------------
+--------------------------------------------------------------------------------
+-- You must compile the wrapper file DSP_SLICE.vhd when simulating
+-- the core, DSP_SLICE. When compiling the wrapper file, be sure to
+-- reference the XilinxCoreLib VHDL simulation library. For detailed
+-- instructions, please refer to the "CORE Generator Help".
+
+-- The synthesis directives "translate_off/translate_on" specified
+-- below are supported by Xilinx, Mentor Graphics and Synplicity
+-- synthesis tools. Ensure they are correct for your synthesis tool(s).
+
+LIBRARY ieee;
+USE ieee.std_logic_1164.ALL;
+-- synthesis translate_off
+LIBRARY XilinxCoreLib;
+-- synthesis translate_on
+ENTITY DSP_SLICE IS
+  PORT (
+    clk : IN STD_LOGIC;
+    ce : IN STD_LOGIC;
+    sel : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    a : IN STD_LOGIC_VECTOR(17 DOWNTO 0);
+    b : IN STD_LOGIC_VECTOR(17 DOWNTO 0);
+    c : IN STD_LOGIC_VECTOR(47 DOWNTO 0);
+    p : OUT STD_LOGIC_VECTOR(47 DOWNTO 0)
+  );
+END DSP_SLICE;
+
+ARCHITECTURE DSP_SLICE_a OF DSP_SLICE IS
+-- synthesis translate_off
+COMPONENT wrapped_DSP_SLICE
+  PORT (
+    clk : IN STD_LOGIC;
+    ce : IN STD_LOGIC;
+    sel : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    a : IN STD_LOGIC_VECTOR(17 DOWNTO 0);
+    b : IN STD_LOGIC_VECTOR(17 DOWNTO 0);
+    c : IN STD_LOGIC_VECTOR(47 DOWNTO 0);
+    p : OUT STD_LOGIC_VECTOR(47 DOWNTO 0)
+  );
+END COMPONENT;
+
+-- Configuration specification
+  FOR ALL : wrapped_DSP_SLICE USE ENTITY XilinxCoreLib.xbip_dsp48_macro_v2_1(behavioral)
+    GENERIC MAP (
+      c_a_width => 18,
+      c_b_width => 18,
+      c_c_width => 48,
+      c_concat_width => 48,
+      c_constant_1 => 1,
+      c_d_width => 18,
+      c_has_a => 1,
+      c_has_acin => 0,
+      c_has_acout => 0,
+      c_has_b => 1,
+      c_has_bcin => 0,
+      c_has_bcout => 0,
+      c_has_c => 1,
+      c_has_carrycascin => 0,
+      c_has_carrycascout => 0,
+      c_has_carryin => 0,
+      c_has_carryout => 0,
+      c_has_ce => 1,
+      c_has_cea => 0,
+      c_has_ceb => 0,
+      c_has_cec => 0,
+      c_has_ceconcat => 0,
+      c_has_ced => 0,
+      c_has_cem => 0,
+      c_has_cep => 0,
+      c_has_cesel => 0,
+      c_has_concat => 0,
+      c_has_d => 0,
+      c_has_indep_ce => 0,
+      c_has_indep_sclr => 0,
+      c_has_pcin => 0,
+      c_has_pcout => 0,
+      c_has_sclr => 0,
+      c_has_sclra => 0,
+      c_has_sclrb => 0,
+      c_has_sclrc => 0,
+      c_has_sclrconcat => 0,
+      c_has_sclrd => 0,
+      c_has_sclrm => 0,
+      c_has_sclrp => 0,
+      c_has_sclrsel => 0,
+      c_latency => -1,
+      c_model_type => 0,
+      c_opmodes => "0000000000010000000,0000001100010000000",
+      c_p_lsb => 0,
+      c_p_msb => 47,
+      c_reg_config => "00000000000011100111100111100100",
+      c_sel_width => 1,
+      c_test_core => 0,
+      c_verbosity => 0,
+      c_xdevicefamily => "spartan6"
+    );
+-- synthesis translate_on
+BEGIN
+-- synthesis translate_off
+U0 : wrapped_DSP_SLICE
+  PORT MAP (
+    clk => clk,
+    ce => ce,
+    sel => sel,
+    a => a,
+    b => b,
+    c => c,
+    p => p
+  );
+-- synthesis translate_on
+
+END DSP_SLICE_a;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/ModulationMemory.gise

@@ -0,0 +1,53 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<generated_project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
+
+  <!--                                                          -->
+
+  <!--             For tool use only. Do not edit.              -->
+
+  <!--                                                          -->
+
+  <!-- ProjectNavigator created generated project file.         -->
+
+  <!-- For use in tracking generated file and other information -->
+
+  <!-- allowing preservation of process status.                 -->
+
+  <!--                                                          -->
+
+  <!-- Copyright (c) 1995-2013 Xilinx, Inc.  All rights reserved. -->
+
+  <version xmlns="http://www.xilinx.com/XMLSchema">11.1</version>
+
+  <sourceproject xmlns="http://www.xilinx.com/XMLSchema" xil_pn:fileType="FILE_XISE" xil_pn:name="ModulationMemory.xise"/>
+
+  <files xmlns="http://www.xilinx.com/XMLSchema">
+    <file xil_pn:fileType="FILE_ASY" xil_pn:name="ModulationMemory.asy" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_SYMBOL" xil_pn:name="ModulationMemory.sym" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_VHO" xil_pn:name="ModulationMemory.vho" xil_pn:origination="imported"/>
+  </files>
+
+  <transforms xmlns="http://www.xilinx.com/XMLSchema">
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_copyInitialToXSTAbstractSynthesis" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_schematicsToHdl" xil_pn:prop_ck="1122694780993201560" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_regenerateCores" xil_pn:prop_ck="5643155787033519143" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_SubProjectAbstractToPreProxy" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_xawsTohdl" xil_pn:prop_ck="-8675282148687179814" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+  </transforms>
+
+</generated_project>

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/ModulationMemory.vhd

@@ -0,0 +1,149 @@
+--------------------------------------------------------------------------------
+--    This file is owned and controlled by Xilinx and must be used solely     --
+--    for design, simulation, implementation and creation of design files     --
+--    limited to Xilinx devices or technologies. Use with non-Xilinx          --
+--    devices or technologies is expressly prohibited and immediately         --
+--    terminates your license.                                                --
+--                                                                            --
+--    XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" SOLELY    --
+--    FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR XILINX DEVICES.  BY    --
+--    PROVIDING THIS DESIGN, CODE, OR INFORMATION AS ONE POSSIBLE             --
+--    IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, XILINX IS      --
+--    MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE FROM ANY      --
+--    CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING ANY       --
+--    RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY       --
+--    DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE   --
+--    IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR          --
+--    REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF         --
+--    INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A   --
+--    PARTICULAR PURPOSE.                                                     --
+--                                                                            --
+--    Xilinx products are not intended for use in life support appliances,    --
+--    devices, or systems.  Use in such applications are expressly            --
+--    prohibited.                                                             --
+--                                                                            --
+--    (c) Copyright 1995-2022 Xilinx, Inc.                                    --
+--    All rights reserved.                                                    --
+--------------------------------------------------------------------------------
+--------------------------------------------------------------------------------
+-- You must compile the wrapper file ModulationMemory.vhd when simulating
+-- the core, ModulationMemory. When compiling the wrapper file, be sure to
+-- reference the XilinxCoreLib VHDL simulation library. For detailed
+-- instructions, please refer to the "CORE Generator Help".
+
+-- The synthesis directives "translate_off/translate_on" specified
+-- below are supported by Xilinx, Mentor Graphics and Synplicity
+-- synthesis tools. Ensure they are correct for your synthesis tool(s).
+
+LIBRARY ieee;
+USE ieee.std_logic_1164.ALL;
+-- synthesis translate_off
+LIBRARY XilinxCoreLib;
+-- synthesis translate_on
+ENTITY ModulationMemory IS
+  PORT (
+    clka : IN STD_LOGIC;
+    wea : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    addra : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    dina : IN STD_LOGIC_VECTOR(143 DOWNTO 0);
+    clkb : IN STD_LOGIC;
+    addrb : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    doutb : OUT STD_LOGIC_VECTOR(143 DOWNTO 0)
+  );
+END ModulationMemory;
+
+ARCHITECTURE ModulationMemory_a OF ModulationMemory IS
+-- synthesis translate_off
+COMPONENT wrapped_ModulationMemory
+  PORT (
+    clka : IN STD_LOGIC;
+    wea : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    addra : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    dina : IN STD_LOGIC_VECTOR(143 DOWNTO 0);
+    clkb : IN STD_LOGIC;
+    addrb : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    doutb : OUT STD_LOGIC_VECTOR(143 DOWNTO 0)
+  );
+END COMPONENT;
+
+-- Configuration specification
+  FOR ALL : wrapped_ModulationMemory USE ENTITY XilinxCoreLib.blk_mem_gen_v7_3(behavioral)
+    GENERIC MAP (
+      c_addra_width => 8,
+      c_addrb_width => 8,
+      c_algorithm => 1,
+      c_axi_id_width => 4,
+      c_axi_slave_type => 0,
+      c_axi_type => 1,
+      c_byte_size => 9,
+      c_common_clk => 0,
+      c_default_data => "0",
+      c_disable_warn_bhv_coll => 0,
+      c_disable_warn_bhv_range => 0,
+      c_enable_32bit_address => 0,
+      c_family => "spartan6",
+      c_has_axi_id => 0,
+      c_has_ena => 0,
+      c_has_enb => 0,
+      c_has_injecterr => 0,
+      c_has_mem_output_regs_a => 0,
+      c_has_mem_output_regs_b => 0,
+      c_has_mux_output_regs_a => 0,
+      c_has_mux_output_regs_b => 0,
+      c_has_regcea => 0,
+      c_has_regceb => 0,
+      c_has_rsta => 0,
+      c_has_rstb => 0,
+      c_has_softecc_input_regs_a => 0,
+      c_has_softecc_output_regs_b => 0,
+      c_init_file => "BlankString",
+      c_init_file_name => "no_coe_file_loaded",
+      c_inita_val => "0",
+      c_initb_val => "0",
+      c_interface_type => 0,
+      c_load_init_file => 0,
+      c_mem_type => 1,
+      c_mux_pipeline_stages => 0,
+      c_prim_type => 1,
+      c_read_depth_a => 256,
+      c_read_depth_b => 256,
+      c_read_width_a => 144,
+      c_read_width_b => 144,
+      c_rst_priority_a => "CE",
+      c_rst_priority_b => "CE",
+      c_rst_type => "SYNC",
+      c_rstram_a => 0,
+      c_rstram_b => 0,
+      c_sim_collision_check => "ALL",
+      c_use_bram_block => 0,
+      c_use_byte_wea => 0,
+      c_use_byte_web => 0,
+      c_use_default_data => 0,
+      c_use_ecc => 0,
+      c_use_softecc => 0,
+      c_wea_width => 1,
+      c_web_width => 1,
+      c_write_depth_a => 256,
+      c_write_depth_b => 256,
+      c_write_mode_a => "WRITE_FIRST",
+      c_write_mode_b => "WRITE_FIRST",
+      c_write_width_a => 144,
+      c_write_width_b => 144,
+      c_xdevicefamily => "spartan6"
+    );
+-- synthesis translate_on
+BEGIN
+-- synthesis translate_off
+U0 : wrapped_ModulationMemory
+  PORT MAP (
+    clka => clka,
+    wea => wea,
+    addra => addra,
+    dina => dina,
+    clkb => clkb,
+    addrb => addrb,
+    doutb => doutb
+  );
+-- synthesis translate_on
+
+END ModulationMemory_a;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/PLL.gise

@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<generated_project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
+
+  <!--                                                          -->
+
+  <!--             For tool use only. Do not edit.              -->
+
+  <!--                                                          -->
+
+  <!-- ProjectNavigator created generated project file.         -->
+
+  <!-- For use in tracking generated file and other information -->
+
+  <!-- allowing preservation of process status.                 -->
+
+  <!--                                                          -->
+
+  <!-- Copyright (c) 1995-2013 Xilinx, Inc.  All rights reserved. -->
+
+  <version xmlns="http://www.xilinx.com/XMLSchema">11.1</version>
+
+  <sourceproject xmlns="http://www.xilinx.com/XMLSchema" xil_pn:fileType="FILE_XISE" xil_pn:name="PLL.xise"/>
+
+  <files xmlns="http://www.xilinx.com/XMLSchema">
+    <file xil_pn:fileType="FILE_ASY" xil_pn:name="PLL.asy" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_VHO" xil_pn:name="PLL.vho" xil_pn:origination="imported"/>
+  </files>
+
+  <transforms xmlns="http://www.xilinx.com/XMLSchema">
+    <transform xil_pn:end_ts="1588801396" xil_pn:name="TRAN_copyInitialToXSTAbstractSynthesis" xil_pn:start_ts="1588801396">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_schematicsToHdl" xil_pn:prop_ck="-7485999881756126958" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_regenerateCores" xil_pn:prop_ck="5187593455580750305" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_SubProjectAbstractToPreProxy" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_xawsTohdl" xil_pn:prop_ck="-8519729393005554412" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+  </transforms>
+
+</generated_project>

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/PLL.ucf

@@ -0,0 +1,59 @@
+# file: PLL.ucf
+# 
+# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+# 
+# This file contains confidential and proprietary information
+# of Xilinx, Inc. and is protected under U.S. and
+# international copyright and other intellectual property
+# laws.
+# 
+# DISCLAIMER
+# This disclaimer is not a license and does not grant any
+# rights to the materials distributed herewith. Except as
+# otherwise provided in a valid license issued to you by
+# Xilinx, and to the maximum extent permitted by applicable
+# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+# (2) Xilinx shall not be liable (whether in contract or tort,
+# including negligence, or under any other theory of
+# liability) for any loss or damage of any kind or nature
+# related to, arising under or in connection with these
+# materials, including for any direct, or any indirect,
+# special, incidental, or consequential loss or damage
+# (including loss of data, profits, goodwill, or any type of
+# loss or damage suffered as a result of any action brought
+# by a third party) even if such damage or loss was
+# reasonably foreseeable or Xilinx had been advised of the
+# possibility of the same.
+# 
+# CRITICAL APPLICATIONS
+# Xilinx products are not designed or intended to be fail-
+# safe, or for use in any application requiring fail-safe
+# performance, such as life-support or safety devices or
+# systems, Class III medical devices, nuclear facilities,
+# applications related to the deployment of airbags, or any
+# other applications that could lead to death, personal
+# injury, or severe property or environmental damage
+# (individually and collectively, "Critical
+# Applications"). Customer assumes the sole risk and
+# liability of any use of Xilinx products in Critical
+# Applications, subject only to applicable laws and
+# regulations governing limitations on product liability.
+# 
+# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+# PART OF THIS FILE AT ALL TIMES.
+# 
+
+# Input clock periods. These duplicate the values entered for the
+#  input clocks. You can use these to time your system
+#----------------------------------------------------------------
+NET "CLK_IN1" TNM_NET = "CLK_IN1";
+TIMESPEC "TS_CLK_IN1" = PERIOD "CLK_IN1" 62.5 ns HIGH 50% INPUT_JITTER 625.0ps;
+
+
+# FALSE PATH constraints 
+PIN "RESET" TIG;
+

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/PLL.vhd

@@ -0,0 +1,172 @@
+-- file: PLL.vhd
+-- 
+-- (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+-- 
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+-- 
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+-- 
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+-- 
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+-- 
+------------------------------------------------------------------------------
+-- User entered comments
+------------------------------------------------------------------------------
+-- None
+--
+------------------------------------------------------------------------------
+-- "Output    Output      Phase     Duty      Pk-to-Pk        Phase"
+-- "Clock    Freq (MHz) (degrees) Cycle (%) Jitter (ps)  Error (ps)"
+------------------------------------------------------------------------------
+-- CLK_OUT1___102.400______0.000______50.0_____1274.405____150.000
+--
+------------------------------------------------------------------------------
+-- "Input Clock   Freq (MHz)    Input Jitter (UI)"
+------------------------------------------------------------------------------
+-- __primary______________16____________0.010
+
+library ieee;
+use ieee.std_logic_1164.all;
+use ieee.std_logic_unsigned.all;
+use ieee.std_logic_arith.all;
+use ieee.numeric_std.all;
+
+library unisim;
+use unisim.vcomponents.all;
+
+entity PLL is
+port
+ (-- Clock in ports
+  CLK_IN1           : in     std_logic;
+  -- Clock out ports
+  CLK_OUT1          : out    std_logic;
+  -- Status and control signals
+  RESET             : in     std_logic;
+  LOCKED            : out    std_logic
+ );
+end PLL;
+
+architecture xilinx of PLL is
+  attribute CORE_GENERATION_INFO : string;
+  attribute CORE_GENERATION_INFO of xilinx : architecture is "PLL,clk_wiz_v3_6,{component_name=PLL,use_phase_alignment=true,use_min_o_jitter=false,use_max_i_jitter=false,use_dyn_phase_shift=false,use_inclk_switchover=false,use_dyn_reconfig=false,feedback_source=FDBK_AUTO,primtype_sel=DCM_SP,num_out_clk=1,clkin1_period=62.5,clkin2_period=62.5,use_power_down=false,use_reset=true,use_locked=true,use_inclk_stopped=false,use_status=false,use_freeze=false,use_clk_valid=false,feedback_type=SINGLE,clock_mgr_type=AUTO,manual_override=false}";
+	  -- Input clock buffering / unused connectors
+  signal clkin1            : std_logic;
+  -- Output clock buffering
+  signal clkfb             : std_logic;
+  signal clk0              : std_logic;
+  signal clkfx             : std_logic;
+  signal clkfbout          : std_logic;
+  signal locked_internal   : std_logic;
+  signal status_internal   : std_logic_vector(7 downto 0);
+begin
+
+
+  -- Input buffering
+  --------------------------------------
+  clkin1_buf : IBUFG
+  port map
+   (O => clkin1,
+    I => CLK_IN1);
+
+
+  -- Clocking primitive
+  --------------------------------------
+  
+  -- Instantiation of the DCM primitive
+  --    * Unused inputs are tied off
+  --    * Unused outputs are labeled unused
+  dcm_sp_inst: DCM_SP
+  generic map
+   (CLKDV_DIVIDE          => 2.000,
+    CLKFX_DIVIDE          => 5,
+    CLKFX_MULTIPLY        => 32,
+    CLKIN_DIVIDE_BY_2     => FALSE,
+    CLKIN_PERIOD          => 62.5,
+    CLKOUT_PHASE_SHIFT    => "NONE",
+    CLK_FEEDBACK          => "1X",
+    DESKEW_ADJUST         => "SYSTEM_SYNCHRONOUS",
+    PHASE_SHIFT           => 0,
+    STARTUP_WAIT          => FALSE)
+  port map
+   -- Input clock
+   (CLKIN                 => clkin1,
+    CLKFB                 => clkfb,
+    -- Output clocks
+    CLK0                  => clk0,
+    CLK90                 => open,
+    CLK180                => open,
+    CLK270                => open,
+    CLK2X                 => open,
+    CLK2X180              => open,
+    CLKFX                 => clkfx,
+    CLKFX180              => open,
+    CLKDV                 => open,
+   -- Ports for dynamic phase shift
+    PSCLK                 => '0',
+    PSEN                  => '0',
+    PSINCDEC              => '0',
+    PSDONE                => open,
+   -- Other control and status signals
+    LOCKED                => locked_internal,
+    STATUS                => status_internal,
+    RST                   => RESET,
+   -- Unused pin, tie low
+    DSSEN                 => '0');
+
+  LOCKED                <= locked_internal;
+
+
+
+  -- Output buffering
+  -------------------------------------
+  clkf_buf : BUFG
+  port map
+   (O => clkfb,
+    I => clk0);
+
+
+  clkout1_buf : BUFG
+  port map
+   (O   => CLK_OUT1,
+    I   => clkfx);
+
+
+
+end xilinx;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/PLL/example_design/PLL_exdes.ucf

@@ -0,0 +1,60 @@
+# file: PLL_exdes.ucf
+# 
+# (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+# 
+# This file contains confidential and proprietary information
+# of Xilinx, Inc. and is protected under U.S. and
+# international copyright and other intellectual property
+# laws.
+# 
+# DISCLAIMER
+# This disclaimer is not a license and does not grant any
+# rights to the materials distributed herewith. Except as
+# otherwise provided in a valid license issued to you by
+# Xilinx, and to the maximum extent permitted by applicable
+# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+# (2) Xilinx shall not be liable (whether in contract or tort,
+# including negligence, or under any other theory of
+# liability) for any loss or damage of any kind or nature
+# related to, arising under or in connection with these
+# materials, including for any direct, or any indirect,
+# special, incidental, or consequential loss or damage
+# (including loss of data, profits, goodwill, or any type of
+# loss or damage suffered as a result of any action brought
+# by a third party) even if such damage or loss was
+# reasonably foreseeable or Xilinx had been advised of the
+# possibility of the same.
+# 
+# CRITICAL APPLICATIONS
+# Xilinx products are not designed or intended to be fail-
+# safe, or for use in any application requiring fail-safe
+# performance, such as life-support or safety devices or
+# systems, Class III medical devices, nuclear facilities,
+# applications related to the deployment of airbags, or any
+# other applications that could lead to death, personal
+# injury, or severe property or environmental damage
+# (individually and collectively, "Critical
+# Applications"). Customer assumes the sole risk and
+# liability of any use of Xilinx products in Critical
+# Applications, subject only to applicable laws and
+# regulations governing limitations on product liability.
+# 
+# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+# PART OF THIS FILE AT ALL TIMES.
+# 
+
+# Input clock periods. These duplicate the values entered for the
+#  input clocks. You can use these to time your system
+#----------------------------------------------------------------
+NET "CLK_IN1" TNM_NET = "CLK_IN1";
+TIMESPEC "TS_CLK_IN1" = PERIOD "CLK_IN1" 62.5 ns HIGH 50% INPUT_JITTER 625.0ps;
+
+
+# FALSE PATH constraints 
+PIN "COUNTER_RESET" TIG;
+PIN "RESET" TIG;
+

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/PLL/example_design/PLL_exdes.vhd

@@ -0,0 +1,182 @@
+-- file: PLL_exdes.vhd
+-- 
+-- (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+-- 
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+-- 
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+-- 
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+-- 
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+-- 
+
+------------------------------------------------------------------------------
+-- Clocking wizard example design
+------------------------------------------------------------------------------
+-- This example design instantiates the created clocking network, where each
+--   output clock drives a counter. The high bit of each counter is ported.
+------------------------------------------------------------------------------
+
+library ieee;
+use ieee.std_logic_1164.all;
+use ieee.std_logic_unsigned.all;
+use ieee.std_logic_arith.all;
+use ieee.numeric_std.all;
+
+library unisim;
+use unisim.vcomponents.all;
+
+entity PLL_exdes is
+generic (
+  TCQ               : in time := 100 ps);
+port
+ (-- Clock in ports
+  CLK_IN1           : in  std_logic;
+  -- Reset that only drives logic in example design
+  COUNTER_RESET     : in  std_logic;
+  CLK_OUT           : out std_logic_vector(1 downto 1) ;
+  -- High bits of counters driven by clocks
+  COUNT             : out std_logic;
+  -- Status and control signals
+  RESET             : in  std_logic;
+  LOCKED            : out std_logic
+ );
+end PLL_exdes;
+
+architecture xilinx of PLL_exdes is
+
+  -- Parameters for the counters
+  ---------------------------------
+  -- Counter width
+  constant C_W        : integer := 16;
+
+
+  -- When the clock goes out of lock, reset the counters
+  signal   locked_int : std_logic;
+  signal   reset_int  : std_logic                     := '0';
+
+  -- Declare the clocks and counter
+  signal   clk        : std_logic;
+  signal   clk_int    : std_logic;
+  signal   clk_n  : std_logic;
+  signal   counter    : std_logic_vector(C_W-1 downto 0) := (others => '0');
+  signal rst_sync : std_logic;
+  signal rst_sync_int : std_logic;
+  signal rst_sync_int1 : std_logic;
+  signal rst_sync_int2 : std_logic;
+
+
+component PLL is
+port
+ (-- Clock in ports
+  CLK_IN1           : in     std_logic;
+  -- Clock out ports
+  CLK_OUT1          : out    std_logic;
+  -- Status and control signals
+  RESET             : in     std_logic;
+  LOCKED            : out    std_logic
+ );
+end component;
+
+begin
+  -- Alias output to internally used signal
+  LOCKED    <= locked_int;
+
+  -- When the clock goes out of lock, reset the counters
+  reset_int <= (not locked_int) or RESET or COUNTER_RESET;
+
+
+ process (clk, reset_int) begin
+   if (reset_int = '1') then
+       rst_sync <= '1';
+       rst_sync_int <= '1';
+       rst_sync_int1 <= '1';
+       rst_sync_int2 <= '1';
+   elsif (clk 'event and clk='1') then
+       rst_sync <= '0';
+       rst_sync_int <= rst_sync;
+       rst_sync_int1 <= rst_sync_int;
+       rst_sync_int2 <= rst_sync_int1;
+   end if;
+ end process;
+
+
+  -- Instantiation of the clocking network
+  ----------------------------------------
+  clknetwork : PLL
+  port map
+   (-- Clock in ports
+    CLK_IN1            => CLK_IN1,
+    -- Clock out ports
+    CLK_OUT1           => clk_int,
+    -- Status and control signals
+    RESET              => RESET,
+    LOCKED             => locked_int);
+
+  clk_n <= not clk;
+  clkout_oddr : ODDR2
+  port map
+   (Q  => CLK_OUT(1),
+    C0 => clk,
+    C1 => clk_n,
+    CE => '1',
+    D0 => '1',
+    D1 => '0',
+    R  => '0',
+    S  => '0');
+
+  -- Connect the output clocks to the design
+  -------------------------------------------
+  clk <= clk_int;
+
+  -- Output clock sampling
+  -------------------------------------
+  process (clk, rst_sync_int2) begin
+      if (rst_sync_int2 = '1') then
+        counter <= (others => '0') after TCQ;
+      elsif (rising_edge(clk)) then
+        counter <= counter + 1 after TCQ;
+      end if;
+  end process;
+  -- alias the high bit to the output
+  COUNT <= counter(C_W-1);
+
+
+end xilinx;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/PLL/simulation/PLL_tb.vhd

@@ -0,0 +1,197 @@
+-- file: PLL_tb.vhd
+-- 
+-- (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+-- 
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+-- 
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+-- 
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+-- 
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+-- 
+
+------------------------------------------------------------------------------
+-- Clocking wizard demonstration testbench
+------------------------------------------------------------------------------
+-- This demonstration testbench instantiates the example design for the 
+--   clocking wizard. Input clocks are toggled, which cause the clocking
+--   network to lock and the counters to increment.
+------------------------------------------------------------------------------
+
+library ieee;
+use ieee.std_logic_1164.all;
+use ieee.std_logic_unsigned.all;
+use ieee.std_logic_arith.all;
+use ieee.numeric_std.all;
+use ieee.std_logic_textio.all;
+
+library std;
+use std.textio.all;
+
+library work;
+use work.all;
+
+entity PLL_tb is
+end PLL_tb;
+
+architecture test of PLL_tb is
+
+  -- Clock to Q delay of 100 ps
+  constant TCQ               : time := 100 ps;
+  -- timescale is 1ps
+  constant ONE_NS      : time := 1 ns;
+  -- how many cycles to run
+  constant COUNT_PHASE : integer := 1024 + 1;
+
+
+  -- we'll be using the period in many locations
+  constant PER1        : time := 62.5 ns;
+
+
+  -- Declare the input clock signals
+  signal CLK_IN1       : std_logic := '1';
+  -- The high bit of the sampling counter
+  signal COUNT         : std_logic;
+  -- Status and control signals
+  signal RESET         : std_logic := '0';
+  signal LOCKED        : std_logic;
+  signal COUNTER_RESET : std_logic := '0';
+--  signal defined to stop mti simulation without severity failure in the report
+  signal end_of_sim : std_logic := '0';
+  signal CLK_OUT : std_logic_vector(1 downto 1);
+--Freq Check using the M & D values setting and actual Frequency generated
+
+component PLL_exdes
+generic (
+  TCQ               : in time := 100 ps);
+port
+ (-- Clock in ports
+  CLK_IN1           : in  std_logic;
+  -- Reset that only drives logic in example design
+  COUNTER_RESET     : in  std_logic;
+  CLK_OUT           : out std_logic_vector(1 downto 1) ;
+  -- High bits of counters driven by clocks
+  COUNT             : out std_logic;
+  -- Status and control signals
+  RESET             : in  std_logic;
+  LOCKED            : out std_logic
+ );
+end component;
+
+begin
+
+  -- Input clock generation
+  --------------------------------------
+  process begin
+    CLK_IN1 <= not CLK_IN1; wait for (PER1/2);
+  end process;
+
+  -- Test sequence
+  process 
+
+    procedure simtimeprint is
+      variable outline : line;
+    begin
+      write(outline, string'("## SYSTEM_CYCLE_COUNTER "));
+      write(outline, NOW/PER1);
+      write(outline, string'(" ns"));
+      writeline(output,outline);
+    end simtimeprint;
+
+    procedure simfreqprint (period : time; clk_num : integer) is
+       variable outputline : LINE;
+       variable str1 : string(1 to 16);
+       variable str2 : integer;
+       variable str3 : string(1 to 2);
+       variable str4 : integer;
+       variable str5 : string(1 to 4);
+    begin
+       str1 := "Freq of CLK_OUT(";
+       str2 :=  clk_num;
+       str3 :=  ") ";
+       str4 :=  1000000 ps/period ;
+       str5 :=  " MHz" ;
+       write(outputline, str1 );
+       write(outputline, str2);
+       write(outputline, str3);
+       write(outputline, str4);
+       write(outputline, str5);
+       writeline(output, outputline);
+    end simfreqprint;
+
+  begin
+    RESET      <= '1';
+    wait for (PER1*6);
+    RESET      <= '0';
+    wait until LOCKED = '1';
+    COUNTER_RESET <= '1';
+    wait for (PER1*20);
+    COUNTER_RESET <= '0';
+    wait for (PER1*COUNT_PHASE);
+
+
+    simtimeprint;
+    end_of_sim <= '1';
+    wait for 1 ps;
+    report "Simulation Stopped." severity failure;
+    wait;
+  end process;
+
+  -- Instantiation of the example design containing the clock
+  --    network and sampling counters
+  -----------------------------------------------------------
+  dut : PLL_exdes
+  generic map (
+    TCQ                => TCQ)
+  port map
+   (-- Clock in ports
+    CLK_IN1            => CLK_IN1,
+    -- Reset for logic in example design
+    COUNTER_RESET      => COUNTER_RESET,
+    CLK_OUT            => CLK_OUT,
+    -- High bits of the counters
+    COUNT              => COUNT,
+    -- Status and control signals
+    RESET              => RESET,
+    LOCKED             => LOCKED);
+
+-- Freq Check 
+
+end test;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/PLL/simulation/timing/PLL_tb.vhd

@@ -0,0 +1,220 @@
+-- file: PLL_tb.vhd
+-- 
+-- (c) Copyright 2008 - 2011 Xilinx, Inc. All rights reserved.
+-- 
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+-- 
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+-- 
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+-- 
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+-- 
+
+------------------------------------------------------------------------------
+-- Clocking wizard demonstration testbench
+------------------------------------------------------------------------------
+-- This demonstration testbench instantiates the example design for the 
+--   clocking wizard. Input clocks are toggled, which cause the clocking
+--   network to lock and the counters to increment.
+------------------------------------------------------------------------------
+
+library ieee;
+use ieee.std_logic_1164.all;
+use ieee.std_logic_unsigned.all;
+use ieee.std_logic_arith.all;
+use ieee.numeric_std.all;
+use ieee.std_logic_textio.all;
+
+library std;
+use std.textio.all;
+
+library work;
+use work.all;
+
+entity PLL_tb is
+end PLL_tb;
+
+architecture test of PLL_tb is
+
+  -- Clock to Q delay of 100 ps
+  constant TCQ               : time := 100 ps;
+  -- timescale is 1ps
+  constant ONE_NS      : time := 1 ns;
+  -- how many cycles to run
+  constant COUNT_PHASE : integer := 1024 + 1;
+
+
+  -- we'll be using the period in many locations
+  constant PER1        : time := 62.5 ns;
+
+
+  -- Declare the input clock signals
+  signal CLK_IN1       : std_logic := '1';
+  -- The high bit of the sampling counter
+  signal COUNT         : std_logic;
+  -- Status and control signals
+  signal RESET         : std_logic := '0';
+  signal LOCKED        : std_logic;
+  signal COUNTER_RESET : std_logic := '0';
+  signal timeout_counter : std_logic_vector (13 downto 0) := (others => '0');
+--  signal defined to stop mti simulation without severity failure in the report
+  signal end_of_sim : std_logic := '0';
+  signal CLK_OUT : std_logic_vector(1 downto 1);
+--Freq Check using the M & D values setting and actual Frequency generated
+
+component PLL_exdes
+port
+ (-- Clock in ports
+  CLK_IN1           : in  std_logic;
+  -- Reset that only drives logic in example design
+  COUNTER_RESET     : in  std_logic;
+  CLK_OUT           : out std_logic_vector(1 downto 1) ;
+  -- High bits of counters driven by clocks
+  COUNT             : out std_logic;
+  -- Status and control signals
+  RESET             : in  std_logic;
+  LOCKED            : out std_logic
+ );
+end component;
+
+begin
+
+  -- Input clock generation
+  --------------------------------------
+  process begin
+    CLK_IN1 <= not CLK_IN1; wait for (PER1/2);
+  end process;
+
+  -- Test sequence
+  process 
+
+    procedure simtimeprint is
+      variable outline : line;
+    begin
+      write(outline, string'("## SYSTEM_CYCLE_COUNTER "));
+      write(outline, NOW/PER1);
+      write(outline, string'(" ns"));
+      writeline(output,outline);
+    end simtimeprint;
+
+    procedure simfreqprint (period : time; clk_num : integer) is
+       variable outputline : LINE;
+       variable str1 : string(1 to 16);
+       variable str2 : integer;
+       variable str3 : string(1 to 2);
+       variable str4 : integer;
+       variable str5 : string(1 to 4);
+    begin
+       str1 := "Freq of CLK_OUT(";
+       str2 :=  clk_num;
+       str3 :=  ") ";
+       str4 :=  1000000 ps/period ;
+       str5 :=  " MHz" ;
+       write(outputline, str1 );
+       write(outputline, str2);
+       write(outputline, str3);
+       write(outputline, str4);
+       write(outputline, str5);
+       writeline(output, outputline);
+    end simfreqprint;
+
+  begin
+   report "Timing checks are not valid" severity note;
+    RESET      <= '1';
+    wait for (PER1*6);
+    RESET      <= '0';
+    wait until LOCKED = '1';
+    wait for (PER1*20);
+    COUNTER_RESET <= '1';
+    wait for (PER1*19.5);
+    COUNTER_RESET <= '0';
+    wait for (PER1*1);
+    report "Timing checks are valid" severity note;
+    wait for (PER1*COUNT_PHASE);
+
+
+    simtimeprint;
+    end_of_sim <= '1';
+    wait for 1 ps;
+    report "Simulation Stopped." severity failure;
+    wait;
+  end process;
+
+ process (CLK_IN1)
+    procedure simtimeprint is
+      variable outline : line;
+    begin
+      write(outline, string'("## SYSTEM_CYCLE_COUNTER "));
+      write(outline, NOW/PER1);
+      write(outline, string'(" ns"));
+      writeline(output,outline);
+    end simtimeprint;
+   begin
+     if (CLK_IN1'event and CLK_IN1='1') then
+         timeout_counter <= timeout_counter + '1';
+       if (timeout_counter = "10000000000000") then
+          if (LOCKED /= '1') then
+            simtimeprint;
+            report "NO LOCK signal" severity failure;
+          end if;
+       end if;
+     end if;
+ end process; 
+
+
+  -- Instantiation of the example design containing the clock
+  --    network and sampling counters
+  -----------------------------------------------------------
+  dut : PLL_exdes
+  port map
+   (-- Clock in ports
+    CLK_IN1            => CLK_IN1,
+    -- Reset for logic in example design
+    COUNTER_RESET      => COUNTER_RESET,
+    CLK_OUT            => CLK_OUT,
+    -- High bits of the counters
+    COUNT              => COUNT,
+    -- Status and control signals
+    RESET              => RESET,
+    LOCKED             => LOCKED);
+
+-- Freq Check 
+
+end test;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/SampleMemory.gise

@@ -0,0 +1,53 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<generated_project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
+
+  <!--                                                          -->
+
+  <!--             For tool use only. Do not edit.              -->
+
+  <!--                                                          -->
+
+  <!-- ProjectNavigator created generated project file.         -->
+
+  <!-- For use in tracking generated file and other information -->
+
+  <!-- allowing preservation of process status.                 -->
+
+  <!--                                                          -->
+
+  <!-- Copyright (c) 1995-2013 Xilinx, Inc.  All rights reserved. -->
+
+  <version xmlns="http://www.xilinx.com/XMLSchema">11.1</version>
+
+  <sourceproject xmlns="http://www.xilinx.com/XMLSchema" xil_pn:fileType="FILE_XISE" xil_pn:name="SampleMemory.xise"/>
+
+  <files xmlns="http://www.xilinx.com/XMLSchema">
+    <file xil_pn:fileType="FILE_ASY" xil_pn:name="SampleMemory.asy" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_SYMBOL" xil_pn:name="SampleMemory.sym" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_VHO" xil_pn:name="SampleMemory.vho" xil_pn:origination="imported"/>
+  </files>
+
+  <transforms xmlns="http://www.xilinx.com/XMLSchema">
+    <transform xil_pn:end_ts="1654646662" xil_pn:name="TRAN_copyInitialToXSTAbstractSynthesis" xil_pn:start_ts="1654646662">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_schematicsToHdl" xil_pn:prop_ck="-5346285223313661724" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_regenerateCores" xil_pn:prop_ck="7774384757506685939" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_SubProjectAbstractToPreProxy" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_xawsTohdl" xil_pn:prop_ck="-6611130985775322842" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+  </transforms>
+
+</generated_project>

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/SampleMemory.vhd

@@ -0,0 +1,149 @@
+--------------------------------------------------------------------------------
+--    This file is owned and controlled by Xilinx and must be used solely     --
+--    for design, simulation, implementation and creation of design files     --
+--    limited to Xilinx devices or technologies. Use with non-Xilinx          --
+--    devices or technologies is expressly prohibited and immediately         --
+--    terminates your license.                                                --
+--                                                                            --
+--    XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" SOLELY    --
+--    FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR XILINX DEVICES.  BY    --
+--    PROVIDING THIS DESIGN, CODE, OR INFORMATION AS ONE POSSIBLE             --
+--    IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, XILINX IS      --
+--    MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE FROM ANY      --
+--    CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING ANY       --
+--    RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY       --
+--    DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE   --
+--    IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR          --
+--    REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF         --
+--    INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A   --
+--    PARTICULAR PURPOSE.                                                     --
+--                                                                            --
+--    Xilinx products are not intended for use in life support appliances,    --
+--    devices, or systems.  Use in such applications are expressly            --
+--    prohibited.                                                             --
+--                                                                            --
+--    (c) Copyright 1995-2022 Xilinx, Inc.                                    --
+--    All rights reserved.                                                    --
+--------------------------------------------------------------------------------
+--------------------------------------------------------------------------------
+-- You must compile the wrapper file SampleMemory.vhd when simulating
+-- the core, SampleMemory. When compiling the wrapper file, be sure to
+-- reference the XilinxCoreLib VHDL simulation library. For detailed
+-- instructions, please refer to the "CORE Generator Help".
+
+-- The synthesis directives "translate_off/translate_on" specified
+-- below are supported by Xilinx, Mentor Graphics and Synplicity
+-- synthesis tools. Ensure they are correct for your synthesis tool(s).
+
+LIBRARY ieee;
+USE ieee.std_logic_1164.ALL;
+-- synthesis translate_off
+LIBRARY XilinxCoreLib;
+-- synthesis translate_on
+ENTITY SampleMemory IS
+  PORT (
+    clka : IN STD_LOGIC;
+    wea : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    addra : IN STD_LOGIC_VECTOR(10 DOWNTO 0);
+    dina : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    clkb : IN STD_LOGIC;
+    addrb : IN STD_LOGIC_VECTOR(10 DOWNTO 0);
+    doutb : OUT STD_LOGIC_VECTOR(7 DOWNTO 0)
+  );
+END SampleMemory;
+
+ARCHITECTURE SampleMemory_a OF SampleMemory IS
+-- synthesis translate_off
+COMPONENT wrapped_SampleMemory
+  PORT (
+    clka : IN STD_LOGIC;
+    wea : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    addra : IN STD_LOGIC_VECTOR(10 DOWNTO 0);
+    dina : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    clkb : IN STD_LOGIC;
+    addrb : IN STD_LOGIC_VECTOR(10 DOWNTO 0);
+    doutb : OUT STD_LOGIC_VECTOR(7 DOWNTO 0)
+  );
+END COMPONENT;
+
+-- Configuration specification
+  FOR ALL : wrapped_SampleMemory USE ENTITY XilinxCoreLib.blk_mem_gen_v7_3(behavioral)
+    GENERIC MAP (
+      c_addra_width => 11,
+      c_addrb_width => 11,
+      c_algorithm => 1,
+      c_axi_id_width => 4,
+      c_axi_slave_type => 0,
+      c_axi_type => 1,
+      c_byte_size => 9,
+      c_common_clk => 0,
+      c_default_data => "0",
+      c_disable_warn_bhv_coll => 0,
+      c_disable_warn_bhv_range => 0,
+      c_enable_32bit_address => 0,
+      c_family => "spartan6",
+      c_has_axi_id => 0,
+      c_has_ena => 0,
+      c_has_enb => 0,
+      c_has_injecterr => 0,
+      c_has_mem_output_regs_a => 0,
+      c_has_mem_output_regs_b => 0,
+      c_has_mux_output_regs_a => 0,
+      c_has_mux_output_regs_b => 0,
+      c_has_regcea => 0,
+      c_has_regceb => 0,
+      c_has_rsta => 0,
+      c_has_rstb => 0,
+      c_has_softecc_input_regs_a => 0,
+      c_has_softecc_output_regs_b => 0,
+      c_init_file => "BlankString",
+      c_init_file_name => "no_coe_file_loaded",
+      c_inita_val => "0",
+      c_initb_val => "0",
+      c_interface_type => 0,
+      c_load_init_file => 0,
+      c_mem_type => 1,
+      c_mux_pipeline_stages => 0,
+      c_prim_type => 1,
+      c_read_depth_a => 2048,
+      c_read_depth_b => 2048,
+      c_read_width_a => 8,
+      c_read_width_b => 8,
+      c_rst_priority_a => "CE",
+      c_rst_priority_b => "CE",
+      c_rst_type => "SYNC",
+      c_rstram_a => 0,
+      c_rstram_b => 0,
+      c_sim_collision_check => "ALL",
+      c_use_bram_block => 0,
+      c_use_byte_wea => 0,
+      c_use_byte_web => 0,
+      c_use_default_data => 0,
+      c_use_ecc => 0,
+      c_use_softecc => 0,
+      c_wea_width => 1,
+      c_web_width => 1,
+      c_write_depth_a => 2048,
+      c_write_depth_b => 2048,
+      c_write_mode_a => "WRITE_FIRST",
+      c_write_mode_b => "WRITE_FIRST",
+      c_write_width_a => 8,
+      c_write_width_b => 8,
+      c_xdevicefamily => "spartan6"
+    );
+-- synthesis translate_on
+BEGIN
+-- synthesis translate_off
+U0 : wrapped_SampleMemory
+  PORT MAP (
+    clka => clka,
+    wea => wea,
+    addra => addra,
+    dina => dina,
+    clkb => clkb,
+    addrb => addrb,
+    doutb => doutb
+  );
+-- synthesis translate_on
+
+END SampleMemory_a;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/SinCos.gise

@@ -0,0 +1,53 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<generated_project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
+
+  <!--                                                          -->
+
+  <!--             For tool use only. Do not edit.              -->
+
+  <!--                                                          -->
+
+  <!-- ProjectNavigator created generated project file.         -->
+
+  <!-- For use in tracking generated file and other information -->
+
+  <!-- allowing preservation of process status.                 -->
+
+  <!--                                                          -->
+
+  <!-- Copyright (c) 1995-2013 Xilinx, Inc.  All rights reserved. -->
+
+  <version xmlns="http://www.xilinx.com/XMLSchema">11.1</version>
+
+  <sourceproject xmlns="http://www.xilinx.com/XMLSchema" xil_pn:fileType="FILE_XISE" xil_pn:name="SinCos.xise"/>
+
+  <files xmlns="http://www.xilinx.com/XMLSchema">
+    <file xil_pn:fileType="FILE_ASY" xil_pn:name="SinCos.asy" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_SYMBOL" xil_pn:name="SinCos.sym" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_VHO" xil_pn:name="SinCos.vho" xil_pn:origination="imported"/>
+  </files>
+
+  <transforms xmlns="http://www.xilinx.com/XMLSchema">
+    <transform xil_pn:end_ts="1588801396" xil_pn:name="TRAN_copyInitialToXSTAbstractSynthesis" xil_pn:start_ts="1588801396">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1600270761" xil_pn:name="TRAN_schematicsToHdl" xil_pn:prop_ck="6318242672365869964" xil_pn:start_ts="1600270761">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1600270761" xil_pn:name="TRAN_regenerateCores" xil_pn:prop_ck="-6896205234688070757" xil_pn:start_ts="1600270761">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1600270761" xil_pn:name="TRAN_SubProjectAbstractToPreProxy" xil_pn:start_ts="1600270761">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1600270761" xil_pn:name="TRAN_xawsTohdl" xil_pn:prop_ck="2493898235901227214" xil_pn:start_ts="1600270761">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+  </transforms>
+
+</generated_project>

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/SinCos.vhd

@@ -0,0 +1,106 @@
+--------------------------------------------------------------------------------
+--    This file is owned and controlled by Xilinx and must be used solely     --
+--    for design, simulation, implementation and creation of design files     --
+--    limited to Xilinx devices or technologies. Use with non-Xilinx          --
+--    devices or technologies is expressly prohibited and immediately         --
+--    terminates your license.                                                --
+--                                                                            --
+--    XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" SOLELY    --
+--    FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR XILINX DEVICES.  BY    --
+--    PROVIDING THIS DESIGN, CODE, OR INFORMATION AS ONE POSSIBLE             --
+--    IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, XILINX IS      --
+--    MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE FROM ANY      --
+--    CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING ANY       --
+--    RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY       --
+--    DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE   --
+--    IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR          --
+--    REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF         --
+--    INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A   --
+--    PARTICULAR PURPOSE.                                                     --
+--                                                                            --
+--    Xilinx products are not intended for use in life support appliances,    --
+--    devices, or systems.  Use in such applications are expressly            --
+--    prohibited.                                                             --
+--                                                                            --
+--    (c) Copyright 1995-2020 Xilinx, Inc.                                    --
+--    All rights reserved.                                                    --
+--------------------------------------------------------------------------------
+--------------------------------------------------------------------------------
+-- You must compile the wrapper file SinCos.vhd when simulating
+-- the core, SinCos. When compiling the wrapper file, be sure to
+-- reference the XilinxCoreLib VHDL simulation library. For detailed
+-- instructions, please refer to the "CORE Generator Help".
+
+-- The synthesis directives "translate_off/translate_on" specified
+-- below are supported by Xilinx, Mentor Graphics and Synplicity
+-- synthesis tools. Ensure they are correct for your synthesis tool(s).
+
+LIBRARY ieee;
+USE ieee.std_logic_1164.ALL;
+-- synthesis translate_off
+LIBRARY XilinxCoreLib;
+-- synthesis translate_on
+ENTITY SinCos IS
+  PORT (
+    clk : IN STD_LOGIC;
+    phase_in : IN STD_LOGIC_VECTOR(11 DOWNTO 0);
+    cosine : OUT STD_LOGIC_VECTOR(15 DOWNTO 0);
+    sine : OUT STD_LOGIC_VECTOR(15 DOWNTO 0)
+  );
+END SinCos;
+
+ARCHITECTURE SinCos_a OF SinCos IS
+-- synthesis translate_off
+COMPONENT wrapped_SinCos
+  PORT (
+    clk : IN STD_LOGIC;
+    phase_in : IN STD_LOGIC_VECTOR(11 DOWNTO 0);
+    cosine : OUT STD_LOGIC_VECTOR(15 DOWNTO 0);
+    sine : OUT STD_LOGIC_VECTOR(15 DOWNTO 0)
+  );
+END COMPONENT;
+
+-- Configuration specification
+  FOR ALL : wrapped_SinCos USE ENTITY XilinxCoreLib.dds_compiler_v4_0(behavioral)
+    GENERIC MAP (
+      c_accumulator_width => 12,
+      c_amplitude => 0,
+      c_channels => 1,
+      c_has_ce => 0,
+      c_has_channel_index => 0,
+      c_has_phase_out => 0,
+      c_has_phasegen => 0,
+      c_has_rdy => 0,
+      c_has_rfd => 0,
+      c_has_sclr => 0,
+      c_has_sincos => 1,
+      c_latency => -1,
+      c_mem_type => 1,
+      c_negative_cosine => 0,
+      c_negative_sine => 0,
+      c_noise_shaping => 0,
+      c_optimise_goal => 0,
+      c_output_width => 16,
+      c_outputs_required => 2,
+      c_phase_angle_width => 12,
+      c_phase_increment => 2,
+      c_phase_increment_value => "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0",
+      c_phase_offset => 0,
+      c_phase_offset_value => "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0",
+      c_por_mode => 0,
+      c_use_dsp48 => 0,
+      c_xdevicefamily => "spartan6"
+    );
+-- synthesis translate_on
+BEGIN
+-- synthesis translate_off
+U0 : wrapped_SinCos
+  PORT MAP (
+    clk => clk,
+    phase_in => phase_in,
+    cosine => cosine,
+    sine => sine
+  );
+-- synthesis translate_on
+
+END SinCos_a;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/SweepConfigMem.gise

@@ -0,0 +1,53 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<generated_project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
+
+  <!--                                                          -->
+
+  <!--             For tool use only. Do not edit.              -->
+
+  <!--                                                          -->
+
+  <!-- ProjectNavigator created generated project file.         -->
+
+  <!-- For use in tracking generated file and other information -->
+
+  <!-- allowing preservation of process status.                 -->
+
+  <!--                                                          -->
+
+  <!-- Copyright (c) 1995-2013 Xilinx, Inc.  All rights reserved. -->
+
+  <version xmlns="http://www.xilinx.com/XMLSchema">11.1</version>
+
+  <sourceproject xmlns="http://www.xilinx.com/XMLSchema" xil_pn:fileType="FILE_XISE" xil_pn:name="SweepConfigMem.xise"/>
+
+  <files xmlns="http://www.xilinx.com/XMLSchema">
+    <file xil_pn:fileType="FILE_ASY" xil_pn:name="SweepConfigMem.asy" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_SYMBOL" xil_pn:name="SweepConfigMem.sym" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_VHO" xil_pn:name="SweepConfigMem.vho" xil_pn:origination="imported"/>
+  </files>
+
+  <transforms xmlns="http://www.xilinx.com/XMLSchema">
+    <transform xil_pn:end_ts="1588801396" xil_pn:name="TRAN_copyInitialToXSTAbstractSynthesis" xil_pn:start_ts="1588801396">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1600270761" xil_pn:name="TRAN_schematicsToHdl" xil_pn:prop_ck="-4981023380131313696" xil_pn:start_ts="1600270761">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1600270761" xil_pn:name="TRAN_regenerateCores" xil_pn:prop_ck="7428936449477002095" xil_pn:start_ts="1600270761">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1600270761" xil_pn:name="TRAN_SubProjectAbstractToPreProxy" xil_pn:start_ts="1600270761">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1600270761" xil_pn:name="TRAN_xawsTohdl" xil_pn:prop_ck="3308610090153173282" xil_pn:start_ts="1600270761">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+  </transforms>
+
+</generated_project>

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/SweepConfigMem.vhd

@@ -0,0 +1,152 @@
+--------------------------------------------------------------------------------
+--    This file is owned and controlled by Xilinx and must be used solely     --
+--    for design, simulation, implementation and creation of design files     --
+--    limited to Xilinx devices or technologies. Use with non-Xilinx          --
+--    devices or technologies is expressly prohibited and immediately         --
+--    terminates your license.                                                --
+--                                                                            --
+--    XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" SOLELY    --
+--    FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR XILINX DEVICES.  BY    --
+--    PROVIDING THIS DESIGN, CODE, OR INFORMATION AS ONE POSSIBLE             --
+--    IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, XILINX IS      --
+--    MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE FROM ANY      --
+--    CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING ANY       --
+--    RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY       --
+--    DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE   --
+--    IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR          --
+--    REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF         --
+--    INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A   --
+--    PARTICULAR PURPOSE.                                                     --
+--                                                                            --
+--    Xilinx products are not intended for use in life support appliances,    --
+--    devices, or systems.  Use in such applications are expressly            --
+--    prohibited.                                                             --
+--                                                                            --
+--    (c) Copyright 1995-2020 Xilinx, Inc.                                    --
+--    All rights reserved.                                                    --
+--------------------------------------------------------------------------------
+--------------------------------------------------------------------------------
+-- You must compile the wrapper file SweepConfigMem.vhd when simulating
+-- the core, SweepConfigMem. When compiling the wrapper file, be sure to
+-- reference the XilinxCoreLib VHDL simulation library. For detailed
+-- instructions, please refer to the "CORE Generator Help".
+
+-- The synthesis directives "translate_off/translate_on" specified
+-- below are supported by Xilinx, Mentor Graphics and Synplicity
+-- synthesis tools. Ensure they are correct for your synthesis tool(s).
+
+LIBRARY ieee;
+USE ieee.std_logic_1164.ALL;
+-- synthesis translate_off
+LIBRARY XilinxCoreLib;
+-- synthesis translate_on
+ENTITY SweepConfigMem IS
+  PORT (
+    clka : IN STD_LOGIC;
+    ena : IN STD_LOGIC;
+    wea : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    addra : IN STD_LOGIC_VECTOR(12 DOWNTO 0);
+    dina : IN STD_LOGIC_VECTOR(95 DOWNTO 0);
+    clkb : IN STD_LOGIC;
+    addrb : IN STD_LOGIC_VECTOR(12 DOWNTO 0);
+    doutb : OUT STD_LOGIC_VECTOR(95 DOWNTO 0)
+  );
+END SweepConfigMem;
+
+ARCHITECTURE SweepConfigMem_a OF SweepConfigMem IS
+-- synthesis translate_off
+COMPONENT wrapped_SweepConfigMem
+  PORT (
+    clka : IN STD_LOGIC;
+    ena : IN STD_LOGIC;
+    wea : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    addra : IN STD_LOGIC_VECTOR(12 DOWNTO 0);
+    dina : IN STD_LOGIC_VECTOR(95 DOWNTO 0);
+    clkb : IN STD_LOGIC;
+    addrb : IN STD_LOGIC_VECTOR(12 DOWNTO 0);
+    doutb : OUT STD_LOGIC_VECTOR(95 DOWNTO 0)
+  );
+END COMPONENT;
+
+-- Configuration specification
+  FOR ALL : wrapped_SweepConfigMem USE ENTITY XilinxCoreLib.blk_mem_gen_v7_3(behavioral)
+    GENERIC MAP (
+      c_addra_width => 13,
+      c_addrb_width => 13,
+      c_algorithm => 1,
+      c_axi_id_width => 4,
+      c_axi_slave_type => 0,
+      c_axi_type => 1,
+      c_byte_size => 9,
+      c_common_clk => 0,
+      c_default_data => "0",
+      c_disable_warn_bhv_coll => 0,
+      c_disable_warn_bhv_range => 0,
+      c_enable_32bit_address => 0,
+      c_family => "spartan6",
+      c_has_axi_id => 0,
+      c_has_ena => 1,
+      c_has_enb => 0,
+      c_has_injecterr => 0,
+      c_has_mem_output_regs_a => 0,
+      c_has_mem_output_regs_b => 0,
+      c_has_mux_output_regs_a => 0,
+      c_has_mux_output_regs_b => 0,
+      c_has_regcea => 0,
+      c_has_regceb => 0,
+      c_has_rsta => 0,
+      c_has_rstb => 0,
+      c_has_softecc_input_regs_a => 0,
+      c_has_softecc_output_regs_b => 0,
+      c_init_file => "BlankString",
+      c_init_file_name => "no_coe_file_loaded",
+      c_inita_val => "0",
+      c_initb_val => "0",
+      c_interface_type => 0,
+      c_load_init_file => 0,
+      c_mem_type => 1,
+      c_mux_pipeline_stages => 0,
+      c_prim_type => 1,
+      c_read_depth_a => 4501,
+      c_read_depth_b => 4501,
+      c_read_width_a => 96,
+      c_read_width_b => 96,
+      c_rst_priority_a => "CE",
+      c_rst_priority_b => "CE",
+      c_rst_type => "SYNC",
+      c_rstram_a => 0,
+      c_rstram_b => 0,
+      c_sim_collision_check => "ALL",
+      c_use_bram_block => 0,
+      c_use_byte_wea => 0,
+      c_use_byte_web => 0,
+      c_use_default_data => 0,
+      c_use_ecc => 0,
+      c_use_softecc => 0,
+      c_wea_width => 1,
+      c_web_width => 1,
+      c_write_depth_a => 4501,
+      c_write_depth_b => 4501,
+      c_write_mode_a => "WRITE_FIRST",
+      c_write_mode_b => "WRITE_FIRST",
+      c_write_width_a => 96,
+      c_write_width_b => 96,
+      c_xdevicefamily => "spartan6"
+    );
+-- synthesis translate_on
+BEGIN
+-- synthesis translate_off
+U0 : wrapped_SweepConfigMem
+  PORT MAP (
+    clka => clka,
+    ena => ena,
+    wea => wea,
+    addra => addra,
+    dina => dina,
+    clkb => clkb,
+    addrb => addrb,
+    doutb => doutb
+  );
+-- synthesis translate_on
+
+END SweepConfigMem_a;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/SweepConfigMem/example_design/SweepConfigMem_exdes.ucf

@@ -0,0 +1,61 @@
+################################################################################
+#
+# (c) Copyright 2002 - 2010 Xilinx, Inc. All rights reserved.
+# 
+# This file contains confidential and proprietary information
+# of Xilinx, Inc. and is protected under U.S. and
+# international copyright and other intellectual property
+# laws.
+# 
+# DISCLAIMER
+# This disclaimer is not a license and does not grant any
+# rights to the materials distributed herewith. Except as
+# otherwise provided in a valid license issued to you by
+# Xilinx, and to the maximum extent permitted by applicable
+# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+# (2) Xilinx shall not be liable (whether in contract or tort,
+# including negligence, or under any other theory of
+# liability) for any loss or damage of any kind or nature
+# related to, arising under or in connection with these
+# materials, including for any direct, or any indirect,
+# special, incidental, or consequential loss or damage
+# (including loss of data, profits, goodwill, or any type of
+# loss or damage suffered as a result of any action brought
+# by a third party) even if such damage or loss was
+# reasonably foreseeable or Xilinx had been advised of the
+# possibility of the same.
+# 
+# CRITICAL APPLICATIONS
+# Xilinx products are not designed or intended to be fail-
+# safe, or for use in any application requiring fail-safe
+# performance, such as life-support or safety devices or
+# systems, Class III medical devices, nuclear facilities,
+# applications related to the deployment of airbags, or any
+# other applications that could lead to death, personal
+# injury, or severe property or environmental damage
+# (individually and collectively, "Critical
+# Applications"). Customer assumes the sole risk and
+# liability of any use of Xilinx products in Critical
+# Applications, subject only to applicable laws and
+# regulations governing limitations on product liability.
+# 
+# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+# PART OF THIS FILE AT ALL TIMES.
+#
+################################################################################
+
+# Tx Core Period Constraint. This constraint can be modified, and is
+# valid as long as it is met after place and route.
+NET "CLKA"  TNM_NET     = "CLKA";
+  
+NET "CLKB"  TNM_NET     = "CLKB";
+
+TIMESPEC "TS_CLKA"      = PERIOD "CLKA"  25 MHZ;
+  
+TIMESPEC "TS_CLKB"      = PERIOD "CLKB"  25 MHZ;
+
+################################################################################

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/SweepConfigMem/example_design/SweepConfigMem_exdes.vhd

@@ -0,0 +1,182 @@
+ 
+ 
+ 
+
+
+
+
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7.1 Core - Top-level core wrapper
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006-2010 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+
+--------------------------------------------------------------------------------
+--
+-- Filename: SweepConfigMem_exdes.vhd
+--
+-- Description:
+--   This is the actual BMG core wrapper.
+--
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: August 31, 2005 - First Release
+--------------------------------------------------------------------------------
+--
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+
+LIBRARY UNISIM;
+USE UNISIM.VCOMPONENTS.ALL;
+
+--------------------------------------------------------------------------------
+-- Entity Declaration
+--------------------------------------------------------------------------------
+ENTITY SweepConfigMem_exdes IS
+  PORT (
+      --Inputs - Port A
+    ENA            : IN STD_LOGIC;  --opt port
+  
+    WEA            : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    ADDRA          : IN STD_LOGIC_VECTOR(12 DOWNTO 0);
+  
+    DINA           : IN STD_LOGIC_VECTOR(95 DOWNTO 0);
+  
+    CLKA       : IN STD_LOGIC;
+
+  
+      --Inputs - Port B
+    ADDRB          : IN STD_LOGIC_VECTOR(12 DOWNTO 0);
+    DOUTB          : OUT STD_LOGIC_VECTOR(95 DOWNTO 0);
+    CLKB           : IN STD_LOGIC
+
+  );
+
+END SweepConfigMem_exdes;
+
+
+ARCHITECTURE xilinx OF SweepConfigMem_exdes IS
+
+  COMPONENT BUFG IS
+  PORT (
+     I      : IN STD_ULOGIC;
+     O      : OUT STD_ULOGIC
+  );
+  END COMPONENT;
+
+  COMPONENT SweepConfigMem IS
+  PORT (
+      --Port A
+    ENA        : IN STD_LOGIC;  --opt port
+  
+    WEA        : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    ADDRA      : IN STD_LOGIC_VECTOR(12 DOWNTO 0);
+  
+    DINA       : IN STD_LOGIC_VECTOR(95 DOWNTO 0);
+
+  
+    CLKA       : IN STD_LOGIC;
+
+  
+      --Port B
+    ADDRB      : IN STD_LOGIC_VECTOR(12 DOWNTO 0);
+    DOUTB      : OUT STD_LOGIC_VECTOR(95 DOWNTO 0);
+    CLKB       : IN STD_LOGIC
+
+
+  );
+  END COMPONENT;
+
+  SIGNAL CLKA_buf     : STD_LOGIC;
+  SIGNAL CLKB_buf     : STD_LOGIC;
+  SIGNAL S_ACLK_buf   : STD_LOGIC;
+
+BEGIN
+
+  bufg_A : BUFG
+    PORT MAP (
+     I => CLKA,
+     O => CLKA_buf
+     );
+
+  bufg_B : BUFG
+    PORT MAP (
+     I => CLKB,
+     O => CLKB_buf
+     );
+
+
+  bmg0 : SweepConfigMem
+    PORT MAP (
+      --Port A
+      ENA        => ENA,
+  
+      WEA        => WEA,
+      ADDRA      => ADDRA,
+  
+      DINA       => DINA,
+
+      CLKA       => CLKA_buf,
+
+  
+      --Port B
+      ADDRB      => ADDRB,
+      DOUTB      => DOUTB,
+      CLKB       => CLKB_buf
+
+    );
+
+END xilinx;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/SweepConfigMem/example_design/SweepConfigMem_prod.vhd

@@ -0,0 +1,277 @@
+ 
+ 
+ 
+
+
+
+
+
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7.1 Core - Top-level wrapper
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006-2011 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+--
+--------------------------------------------------------------------------------
+--
+-- Filename: SweepConfigMem_prod.vhd
+--
+-- Description:
+--   This is the top-level BMG wrapper (over BMG core).
+--
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: August 31, 2005 - First Release
+--------------------------------------------------------------------------------
+--
+-- Configured Core Parameter Values:
+-- (Refer to the SIM Parameters table in the datasheet for more information on
+-- the these parameters.)
+--    C_FAMILY                    :  spartan6 
+--    C_XDEVICEFAMILY             :  spartan6 
+--    C_INTERFACE_TYPE            :  0 
+--    C_ENABLE_32BIT_ADDRESS      :  0 
+--    C_AXI_TYPE                  :  1 
+--    C_AXI_SLAVE_TYPE            :  0 
+--    C_AXI_ID_WIDTH              :  4 
+--    C_MEM_TYPE                  :  1 
+--    C_BYTE_SIZE                 :  9 
+--    C_ALGORITHM                 :  1 
+--    C_PRIM_TYPE                 :  1 
+--    C_LOAD_INIT_FILE            :  0 
+--    C_INIT_FILE_NAME            :  no_coe_file_loaded 
+--    C_USE_DEFAULT_DATA          :  0 
+--    C_DEFAULT_DATA              :  0 
+--    C_RST_TYPE                  :  SYNC 
+--    C_HAS_RSTA                  :  0 
+--    C_RST_PRIORITY_A            :  CE 
+--    C_RSTRAM_A                  :  0 
+--    C_INITA_VAL                 :  0 
+--    C_HAS_ENA                   :  1 
+--    C_HAS_REGCEA                :  0 
+--    C_USE_BYTE_WEA              :  0 
+--    C_WEA_WIDTH                 :  1 
+--    C_WRITE_MODE_A              :  WRITE_FIRST 
+--    C_WRITE_WIDTH_A             :  96 
+--    C_READ_WIDTH_A              :  96 
+--    C_WRITE_DEPTH_A             :  4501 
+--    C_READ_DEPTH_A              :  4501 
+--    C_ADDRA_WIDTH               :  13 
+--    C_HAS_RSTB                  :  0 
+--    C_RST_PRIORITY_B            :  CE 
+--    C_RSTRAM_B                  :  0 
+--    C_INITB_VAL                 :  0 
+--    C_HAS_ENB                   :  0 
+--    C_HAS_REGCEB                :  0 
+--    C_USE_BYTE_WEB              :  0 
+--    C_WEB_WIDTH                 :  1 
+--    C_WRITE_MODE_B              :  WRITE_FIRST 
+--    C_WRITE_WIDTH_B             :  96 
+--    C_READ_WIDTH_B              :  96 
+--    C_WRITE_DEPTH_B             :  4501 
+--    C_READ_DEPTH_B              :  4501 
+--    C_ADDRB_WIDTH               :  13 
+--    C_HAS_MEM_OUTPUT_REGS_A     :  0 
+--    C_HAS_MEM_OUTPUT_REGS_B     :  0 
+--    C_HAS_MUX_OUTPUT_REGS_A     :  0 
+--    C_HAS_MUX_OUTPUT_REGS_B     :  0 
+--    C_HAS_SOFTECC_INPUT_REGS_A  :  0 
+--    C_HAS_SOFTECC_OUTPUT_REGS_B :  0 
+--    C_MUX_PIPELINE_STAGES       :  0 
+--    C_USE_ECC                   :  0 
+--    C_USE_SOFTECC               :  0 
+--    C_HAS_INJECTERR             :  0 
+--    C_SIM_COLLISION_CHECK       :  ALL 
+--    C_COMMON_CLK                :  0 
+--    C_DISABLE_WARN_BHV_COLL     :  0 
+--    C_DISABLE_WARN_BHV_RANGE    :  0 
+
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+
+LIBRARY UNISIM;
+USE UNISIM.VCOMPONENTS.ALL;
+
+--------------------------------------------------------------------------------
+-- Entity Declaration
+--------------------------------------------------------------------------------
+ENTITY SweepConfigMem_prod IS
+  PORT (
+    --Port A
+    CLKA       : IN STD_LOGIC;
+    RSTA       : IN STD_LOGIC;  --opt port
+    ENA        : IN STD_LOGIC;  --optional port
+    REGCEA     : IN STD_LOGIC;  --optional port
+    WEA        : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    ADDRA      : IN STD_LOGIC_VECTOR(12 DOWNTO 0);
+    DINA       : IN STD_LOGIC_VECTOR(95 DOWNTO 0);
+    DOUTA      : OUT STD_LOGIC_VECTOR(95 DOWNTO 0);
+
+    --Port B
+    CLKB       : IN STD_LOGIC;
+    RSTB       : IN STD_LOGIC;  --opt port
+    ENB        : IN STD_LOGIC;  --optional port
+    REGCEB     : IN STD_LOGIC;  --optional port
+    WEB        : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    ADDRB      : IN STD_LOGIC_VECTOR(12 DOWNTO 0);
+    DINB       : IN STD_LOGIC_VECTOR(95 DOWNTO 0);
+    DOUTB      : OUT STD_LOGIC_VECTOR(95 DOWNTO 0);
+
+    --ECC
+    INJECTSBITERR  : IN STD_LOGIC; --optional port
+    INJECTDBITERR  : IN STD_LOGIC; --optional port
+    SBITERR        : OUT STD_LOGIC; --optional port
+    DBITERR        : OUT STD_LOGIC; --optional port
+    RDADDRECC      : OUT STD_LOGIC_VECTOR(12 DOWNTO 0); --optional port
+ -- AXI BMG Input and Output Port Declarations
+
+    -- AXI Global Signals
+    S_ACLK                         : IN  STD_LOGIC;
+    S_AXI_AWID                     : IN  STD_LOGIC_VECTOR(3 DOWNTO 0);
+    S_AXI_AWADDR                   : IN  STD_LOGIC_VECTOR(31 DOWNTO 0);
+    S_AXI_AWLEN                    : IN  STD_LOGIC_VECTOR(7 DOWNTO 0);
+    S_AXI_AWSIZE                   : IN  STD_LOGIC_VECTOR(2 DOWNTO 0);
+    S_AXI_AWBURST                  : IN  STD_LOGIC_VECTOR(1 DOWNTO 0);
+    S_AXI_AWVALID                  : IN  STD_LOGIC;
+    S_AXI_AWREADY                  : OUT STD_LOGIC;
+    S_AXI_WDATA                    : IN  STD_LOGIC_VECTOR(95  DOWNTO 0);
+    S_AXI_WSTRB                    : IN  STD_LOGIC_VECTOR(0  DOWNTO 0);
+    S_AXI_WLAST                    : IN  STD_LOGIC;
+    S_AXI_WVALID                   : IN  STD_LOGIC;
+    S_AXI_WREADY                   : OUT STD_LOGIC;
+    S_AXI_BID                      : OUT STD_LOGIC_VECTOR(3  DOWNTO 0):= (OTHERS => '0');
+    S_AXI_BRESP                    : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
+    S_AXI_BVALID                   : OUT STD_LOGIC;
+    S_AXI_BREADY                   : IN  STD_LOGIC;
+
+    -- AXI Full/Lite Slave Read (Write side)
+    S_AXI_ARID                     : IN  STD_LOGIC_VECTOR(3  DOWNTO 0);
+    S_AXI_ARADDR                   : IN  STD_LOGIC_VECTOR(31 DOWNTO 0);
+    S_AXI_ARLEN                    : IN  STD_LOGIC_VECTOR(7 DOWNTO 0);
+    S_AXI_ARSIZE                   : IN  STD_LOGIC_VECTOR(2 DOWNTO 0);
+    S_AXI_ARBURST                  : IN  STD_LOGIC_VECTOR(1 DOWNTO 0);
+    S_AXI_ARVALID                  : IN  STD_LOGIC;
+    S_AXI_ARREADY                  : OUT STD_LOGIC;
+    S_AXI_RID                      : OUT STD_LOGIC_VECTOR(3  DOWNTO 0):= (OTHERS => '0');
+    S_AXI_RDATA                    : OUT STD_LOGIC_VECTOR(95  DOWNTO 0);
+    S_AXI_RRESP                    : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
+    S_AXI_RLAST                    : OUT STD_LOGIC;
+    S_AXI_RVALID                   : OUT STD_LOGIC;
+    S_AXI_RREADY                   : IN  STD_LOGIC;
+
+    -- AXI Full/Lite Sideband Signals
+    S_AXI_INJECTSBITERR            : IN  STD_LOGIC;
+    S_AXI_INJECTDBITERR            : IN  STD_LOGIC;
+    S_AXI_SBITERR                  : OUT STD_LOGIC;
+    S_AXI_DBITERR                  : OUT STD_LOGIC;
+    S_AXI_RDADDRECC                : OUT STD_LOGIC_VECTOR(12  DOWNTO 0);
+    S_ARESETN                      : IN  STD_LOGIC
+
+
+  );
+
+END SweepConfigMem_prod;
+
+
+ARCHITECTURE xilinx OF SweepConfigMem_prod IS
+
+  COMPONENT SweepConfigMem_exdes IS
+  PORT (
+      --Port A
+    ENA            : IN STD_LOGIC;  --opt port
+  
+    WEA            : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    ADDRA          : IN STD_LOGIC_VECTOR(12 DOWNTO 0);
+  
+    DINA           : IN STD_LOGIC_VECTOR(95 DOWNTO 0);
+
+  
+    CLKA       : IN STD_LOGIC;
+
+  
+      --Port B
+    ADDRB          : IN STD_LOGIC_VECTOR(12 DOWNTO 0);
+    DOUTB          : OUT STD_LOGIC_VECTOR(95 DOWNTO 0);
+    CLKB           : IN STD_LOGIC
+
+
+
+  );
+  END COMPONENT;
+
+BEGIN
+
+  bmg0 : SweepConfigMem_exdes
+    PORT MAP (
+      --Port A
+      ENA        => ENA,
+  
+      WEA        => WEA,
+      ADDRA      => ADDRA,
+  
+      DINA       => DINA,
+
+      CLKA       => CLKA,
+  
+      --Port B
+      ADDRB      => ADDRB,
+      DOUTB      => DOUTB,
+      CLKB       => CLKB
+
+
+
+      );
+END xilinx;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/SweepConfigMem/simulation/SweepConfigMem_synth.vhd

@@ -0,0 +1,329 @@
+ 
+ 
+ 
+
+
+
+
+
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7_3 Core - Synthesizable Testbench
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006_3010 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+
+--------------------------------------------------------------------------------
+--
+-- Filename: SweepConfigMem_synth.vhd
+--
+-- Description:
+--  Synthesizable Testbench
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: Sep 12, 2011 - First Release
+--------------------------------------------------------------------------------
+--
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.NUMERIC_STD.ALL;
+USE IEEE.STD_LOGIC_MISC.ALL;
+
+LIBRARY STD;
+USE STD.TEXTIO.ALL;
+
+--LIBRARY unisim;
+--USE unisim.vcomponents.ALL;
+
+LIBRARY work;
+USE work.ALL;
+USE work.BMG_TB_PKG.ALL;
+
+ENTITY SweepConfigMem_synth IS
+PORT(
+	CLK_IN     : IN  STD_LOGIC;
+	CLKB_IN     : IN  STD_LOGIC;
+    RESET_IN   : IN  STD_LOGIC;
+    STATUS     : OUT STD_LOGIC_VECTOR(8 DOWNTO 0) := (OTHERS => '0')   --ERROR STATUS OUT OF FPGA
+    );
+END ENTITY;
+
+ARCHITECTURE SweepConfigMem_synth_ARCH OF SweepConfigMem_synth IS
+
+
+COMPONENT SweepConfigMem_exdes 
+  PORT (
+      --Inputs - Port A
+    ENA            : IN STD_LOGIC;  --opt port
+    WEA            : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    ADDRA          : IN STD_LOGIC_VECTOR(12 DOWNTO 0);
+    DINA           : IN STD_LOGIC_VECTOR(95 DOWNTO 0);
+    CLKA       : IN STD_LOGIC;
+
+      --Inputs - Port B
+    ADDRB          : IN STD_LOGIC_VECTOR(12 DOWNTO 0);
+    DOUTB          : OUT STD_LOGIC_VECTOR(95 DOWNTO 0);
+    CLKB           : IN STD_LOGIC
+
+  );
+
+END COMPONENT;
+
+
+  SIGNAL CLKA: STD_LOGIC := '0';
+  SIGNAL RSTA: STD_LOGIC := '0';
+  SIGNAL ENA: STD_LOGIC := '0';
+  SIGNAL ENA_R: STD_LOGIC := '0';
+  SIGNAL WEA: STD_LOGIC_VECTOR(0 DOWNTO 0) := (OTHERS => '0');
+  SIGNAL WEA_R: STD_LOGIC_VECTOR(0 DOWNTO 0) := (OTHERS => '0');
+  SIGNAL ADDRA: STD_LOGIC_VECTOR(12 DOWNTO 0) := (OTHERS => '0');
+  SIGNAL ADDRA_R: STD_LOGIC_VECTOR(12 DOWNTO 0) := (OTHERS => '0');
+  SIGNAL DINA: STD_LOGIC_VECTOR(95 DOWNTO 0) := (OTHERS => '0');
+  SIGNAL DINA_R: STD_LOGIC_VECTOR(95 DOWNTO 0) := (OTHERS => '0');
+  SIGNAL CLKB: STD_LOGIC := '0';
+  SIGNAL RSTB: STD_LOGIC := '0';
+  SIGNAL ADDRB: STD_LOGIC_VECTOR(12 DOWNTO 0) := (OTHERS => '0');
+  SIGNAL ADDRB_R: STD_LOGIC_VECTOR(12 DOWNTO 0) := (OTHERS => '0');
+  SIGNAL DOUTB: STD_LOGIC_VECTOR(95 DOWNTO 0);
+  SIGNAL CHECKER_EN : STD_LOGIC:='0';
+  SIGNAL CHECKER_EN_R : STD_LOGIC:='0';
+  SIGNAL STIMULUS_FLOW : STD_LOGIC_VECTOR(22 DOWNTO 0) := (OTHERS =>'0');
+  SIGNAL clk_in_i: STD_LOGIC;
+ 
+  SIGNAL RESET_SYNC_R1 : STD_LOGIC:='1';
+  SIGNAL RESET_SYNC_R2 : STD_LOGIC:='1';
+  SIGNAL RESET_SYNC_R3 : STD_LOGIC:='1';
+
+  SIGNAL clkb_in_i: STD_LOGIC;
+  SIGNAL RESETB_SYNC_R1 : STD_LOGIC := '1';
+  SIGNAL RESETB_SYNC_R2 : STD_LOGIC := '1';
+  SIGNAL RESETB_SYNC_R3 : STD_LOGIC := '1';
+  SIGNAL ITER_R0 : STD_LOGIC := '0';
+  SIGNAL ITER_R1 : STD_LOGIC := '0';
+  SIGNAL ITER_R2 : STD_LOGIC := '0';
+
+  SIGNAL ISSUE_FLAG : STD_LOGIC_VECTOR(7 DOWNTO 0) := (OTHERS => '0');
+  SIGNAL ISSUE_FLAG_STATUS : STD_LOGIC_VECTOR(7 DOWNTO 0) := (OTHERS => '0');
+
+  BEGIN
+
+--  clk_buf: bufg
+--    PORT map(
+--      i => CLK_IN,
+--      o => clk_in_i
+--    );
+   clk_in_i <= CLK_IN;
+   CLKA <= clk_in_i;
+
+--  clkb_buf: bufg
+--    PORT map(
+--      i => CLKB_IN,
+--      o => clkb_in_i
+--    );
+   clkb_in_i <= CLKB_IN;
+   CLKB <= clkb_in_i;
+   RSTA <= RESET_SYNC_R3 AFTER 50 ns;
+
+
+   PROCESS(clk_in_i)
+   BEGIN
+      IF(RISING_EDGE(clk_in_i)) THEN
+		 RESET_SYNC_R1 <= RESET_IN;
+		 RESET_SYNC_R2 <= RESET_SYNC_R1;
+		 RESET_SYNC_R3 <= RESET_SYNC_R2;
+	  END IF;
+   END PROCESS;
+
+   RSTB <= RESETB_SYNC_R3 AFTER 50 ns;
+
+   PROCESS(clkb_in_i)
+   BEGIN
+      IF(RISING_EDGE(clkb_in_i)) THEN
+		 RESETB_SYNC_R1 <= RESET_IN;
+		 RESETB_SYNC_R2 <= RESETB_SYNC_R1;
+		 RESETB_SYNC_R3 <= RESETB_SYNC_R2;
+	  END IF;
+   END PROCESS;
+
+PROCESS(CLKA)
+BEGIN
+  IF(RISING_EDGE(CLKA)) THEN
+    IF(RESET_SYNC_R3='1') THEN
+        ISSUE_FLAG_STATUS<= (OTHERS => '0'); 
+	  ELSE
+        ISSUE_FLAG_STATUS <= ISSUE_FLAG_STATUS OR ISSUE_FLAG;
+   END IF;
+  END IF;
+END PROCESS;
+
+STATUS(7 DOWNTO 0) <= ISSUE_FLAG_STATUS;
+
+
+
+
+   BMG_DATA_CHECKER_INST: ENTITY work.CHECKER
+      GENERIC MAP ( 
+         WRITE_WIDTH => 96,
+		 READ_WIDTH  => 96      )
+      PORT MAP (
+         CLK      => clkb_in_i,
+         RST      => RSTB, 
+         EN       => CHECKER_EN_R,
+         DATA_IN  => DOUTB,
+         STATUS   => ISSUE_FLAG(0)
+	   );
+
+   PROCESS(clkb_in_i)
+   BEGIN
+      IF(RISING_EDGE(clkb_in_i)) THEN
+         IF(RSTB='1') THEN
+		    CHECKER_EN_R <= '0';
+	     ELSE
+		    CHECKER_EN_R <= CHECKER_EN AFTER 50 ns;
+         END IF;
+      END IF;
+   END PROCESS;
+
+
+ BMG_STIM_GEN_INST:ENTITY work.BMG_STIM_GEN
+     PORT MAP(
+       CLKA => clk_in_i,
+       CLKB => clkb_in_i,
+       TB_RST => RSTA,
+       ADDRA  => ADDRA,
+       DINA => DINA,
+       ENA => ENA,
+       WEA => WEA,
+       ADDRB => ADDRB,
+	   CHECK_DATA => CHECKER_EN
+     );
+  PROCESS(CLKA)
+  BEGIN
+    IF(RISING_EDGE(CLKA)) THEN
+	  IF(RESET_SYNC_R3='1') THEN
+		STATUS(8) <= '0';
+		iter_r2 <= '0';
+		iter_r1 <= '0';
+		iter_r0 <= '0';
+	  ELSE
+		STATUS(8) <= iter_r2;
+		iter_r2 <= iter_r1;
+		iter_r1 <= iter_r0;
+		iter_r0 <= STIMULUS_FLOW(8);
+      END IF;
+    END IF;
+  END PROCESS;
+
+
+  PROCESS(CLKA)
+  BEGIN
+    IF(RISING_EDGE(CLKA)) THEN
+	  IF(RESET_SYNC_R3='1') THEN
+	      STIMULUS_FLOW <= (OTHERS => '0'); 
+       ELSIF(WEA(0)='1') THEN
+	      STIMULUS_FLOW <= STIMULUS_FLOW+1;
+     END IF;
+	    END IF;
+      END PROCESS;
+
+
+
+      PROCESS(CLKA)
+      BEGIN
+        IF(RISING_EDGE(CLKA)) THEN
+		  IF(RESET_SYNC_R3='1') THEN
+            ENA_R <= '0' AFTER 50 ns;
+            WEA_R  <= (OTHERS=>'0') AFTER 50 ns;
+            DINA_R <= (OTHERS=>'0') AFTER 50 ns;
+          
+
+           ELSE
+          ENA_R <= ENA AFTER 50 ns;
+            WEA_R  <= WEA AFTER 50 ns;
+            DINA_R <= DINA AFTER 50 ns;
+
+         END IF;
+	    END IF;
+      END PROCESS;
+
+
+      PROCESS(CLKA)
+      BEGIN
+        IF(RISING_EDGE(CLKA)) THEN
+		  IF(RESET_SYNC_R3='1') THEN
+            ADDRA_R <= (OTHERS=> '0') AFTER 50 ns;
+            ADDRB_R <= (OTHERS=> '0') AFTER 50 ns;
+          ELSE
+            ADDRA_R <= ADDRA AFTER 50 ns;
+            ADDRB_R <= ADDRB AFTER 50 ns;
+          END IF;
+	    END IF;
+      END PROCESS;
+
+
+    BMG_PORT: SweepConfigMem_exdes PORT MAP ( 
+      --Port A
+      ENA        => ENA_R,
+      WEA        => WEA_R,
+      ADDRA      => ADDRA_R,
+      DINA       => DINA_R,
+      CLKA       => CLKA,
+      --Port B
+      ADDRB      => ADDRB_R,
+      DOUTB      => DOUTB,
+      CLKB       => CLKB
+
+    );
+END ARCHITECTURE;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/SweepConfigMem/simulation/SweepConfigMem_tb.vhd

@@ -0,0 +1,142 @@
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7_3 Core - Top File for the Example Testbench
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006_3010 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+
+--------------------------------------------------------------------------------
+-- Filename: SweepConfigMem_tb.vhd
+-- Description:
+--  Testbench Top
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: Sep 12, 2011 - First Release
+--------------------------------------------------------------------------------
+--
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+
+LIBRARY work;
+USE work.ALL;
+
+ENTITY SweepConfigMem_tb IS
+END ENTITY;
+
+
+ARCHITECTURE SweepConfigMem_tb_ARCH OF SweepConfigMem_tb IS
+ SIGNAL  STATUS : STD_LOGIC_VECTOR(8 DOWNTO 0);
+ SIGNAL  CLK :  STD_LOGIC := '1';
+ SIGNAL  CLKB :  STD_LOGIC := '1';
+ SIGNAL  RESET : STD_LOGIC;
+ 
+ BEGIN
+
+  
+ CLK_GEN: PROCESS BEGIN
+     CLK <= NOT CLK;
+     WAIT FOR 100 NS;
+     CLK <= NOT CLK; 
+     WAIT FOR 100 NS;
+  END PROCESS;
+ CLKB_GEN: PROCESS BEGIN
+     CLKB <= NOT CLKB;
+     WAIT FOR 100 NS;
+     CLKB <= NOT CLKB; 
+     WAIT FOR 100 NS;
+  END PROCESS;
+  
+  RST_GEN: PROCESS BEGIN
+    RESET <= '1';
+    WAIT FOR 1000 NS;
+    RESET <= '0';
+    WAIT;
+  END PROCESS;
+
+  
+--STOP_SIM: PROCESS BEGIN
+-- WAIT FOR 200 US; -- STOP SIMULATION AFTER 1 MS
+--   ASSERT FALSE
+--     REPORT "END SIMULATION TIME REACHED"
+--     SEVERITY FAILURE;
+--END PROCESS;
+--
+PROCESS BEGIN
+  WAIT UNTIL STATUS(8)='1';
+  IF( STATUS(7 downto 0)/="0") THEN
+    ASSERT false
+     REPORT "Test Completed Successfully"
+	 SEVERITY NOTE;
+     REPORT "Simulation Failed"
+	 SEVERITY FAILURE;
+  ELSE
+   ASSERT false
+     REPORT "TEST PASS"
+     SEVERITY NOTE;
+     REPORT "Test Completed Successfully"
+	 SEVERITY FAILURE;
+  END IF;
+  
+END PROCESS;	 
+  
+  SweepConfigMem_synth_inst:ENTITY work.SweepConfigMem_synth
+  PORT MAP(
+           CLK_IN   => CLK,
+           CLKB_IN   => CLK,
+     	   RESET_IN => RESET,
+           STATUS   => STATUS
+	  );
+
+END ARCHITECTURE;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/SweepConfigMem/simulation/addr_gen.vhd

@@ -0,0 +1,117 @@
+
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7_3 Core - Address Generator
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006_3010 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+
+--------------------------------------------------------------------------------
+--
+-- Filename: addr_gen.vhd
+--
+-- Description:
+--   Address Generator
+--
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: Sep 12, 2011 - First Release
+--------------------------------------------------------------------------------
+--
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+
+LIBRARY work;
+USE work.ALL;
+
+ENTITY ADDR_GEN IS
+  GENERIC ( C_MAX_DEPTH : INTEGER :=  1024 ;
+            RST_VALUE  : STD_LOGIC_VECTOR(31 DOWNTO 0) := (OTHERS=> '0');
+            RST_INC  : INTEGER := 0);
+  PORT (
+        CLK         : IN STD_LOGIC;
+        RST         : IN STD_LOGIC;
+        EN          : IN STD_LOGIC;
+        LOAD        :IN STD_LOGIC;
+        LOAD_VALUE  : IN STD_LOGIC_VECTOR (31 DOWNTO 0)  := (OTHERS => '0');
+        ADDR_OUT    : OUT STD_LOGIC_VECTOR (31 DOWNTO 0)   --OUTPUT VECTOR           
+  );
+END ADDR_GEN;
+
+ARCHITECTURE BEHAVIORAL OF ADDR_GEN IS
+   SIGNAL ADDR_TEMP : STD_LOGIC_VECTOR(31 DOWNTO 0) := (OTHERS =>'0');
+BEGIN
+   ADDR_OUT <= ADDR_TEMP;
+   PROCESS(CLK)
+   BEGIN
+      IF(RISING_EDGE(CLK)) THEN
+         IF(RST='1') THEN
+    	    ADDR_TEMP<= RST_VALUE + conv_std_logic_vector(RST_INC,32 ); 
+         ELSE
+            IF(EN='1') THEN
+               IF(LOAD='1') THEN
+	              ADDR_TEMP <=LOAD_VALUE;
+	           ELSE
+	              IF(ADDR_TEMP = C_MAX_DEPTH-1) THEN
+         	         ADDR_TEMP<= RST_VALUE + conv_std_logic_vector(RST_INC,32 );
+	              ELSE
+	                 ADDR_TEMP <= ADDR_TEMP + '1';
+	              END IF;
+	           END IF;
+	        END IF;
+         END IF;
+      END IF;
+   END PROCESS;
+END ARCHITECTURE;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/SweepConfigMem/simulation/bmg_stim_gen.vhd

@@ -0,0 +1,436 @@
+      
+
+
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7_3 Core - Stimulus Generator For Simple Dual Port RAM
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006_3010 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+
+--------------------------------------------------------------------------------
+--
+-- Filename: bmg_stim_gen.vhd
+--
+-- Description:
+--  Stimulus Generation For SDP Configuration
+--  100 Writes and 100 Reads will be performed in a repeatitive loop till the 
+--  simulation ends
+--
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: Sep 12, 2011 - First Release
+--------------------------------------------------------------------------------
+--
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+USE IEEE.STD_LOGIC_MISC.ALL;
+
+ LIBRARY work;
+USE work.ALL;
+USE work.BMG_TB_PKG.ALL;
+
+
+ENTITY REGISTER_LOGIC IS
+  PORT(
+    Q   : OUT STD_LOGIC;
+    CLK : IN STD_LOGIC;
+    RST : IN STD_LOGIC;
+    D   : IN STD_LOGIC
+  );
+END REGISTER_LOGIC;
+
+ARCHITECTURE REGISTER_ARCH OF REGISTER_LOGIC IS
+SIGNAL Q_O : STD_LOGIC :='0';
+BEGIN
+  Q <= Q_O;
+  FF_BEH: PROCESS(CLK)
+  BEGIN
+     IF(RISING_EDGE(CLK)) THEN
+        IF(RST ='1') THEN
+           Q_O <= '0';
+        ELSE
+           Q_O <= D;
+        END IF;
+     END IF;
+  END PROCESS;
+END REGISTER_ARCH;
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+USE IEEE.STD_LOGIC_MISC.ALL;
+
+LIBRARY work;
+USE work.ALL;
+USE work.BMG_TB_PKG.ALL;
+
+
+ENTITY BMG_STIM_GEN IS
+      PORT (
+            CLKA : IN STD_LOGIC;
+            CLKB : IN STD_LOGIC;
+            TB_RST : IN STD_LOGIC;
+            ADDRA: OUT  STD_LOGIC_VECTOR(12 DOWNTO 0) := (OTHERS => '0'); 
+            DINA : OUT  STD_LOGIC_VECTOR(95 DOWNTO 0) := (OTHERS => '0'); 
+            ENA : OUT STD_LOGIC :='0';
+            WEA : OUT STD_LOGIC_VECTOR (0 DOWNTO 0) := (OTHERS => '0');
+            ADDRB: OUT  STD_LOGIC_VECTOR(12 DOWNTO 0) := (OTHERS => '0');
+	        CHECK_DATA: OUT STD_LOGIC:='0'
+	  );
+END BMG_STIM_GEN;
+
+
+ARCHITECTURE BEHAVIORAL OF BMG_STIM_GEN IS
+
+CONSTANT ZERO                    : STD_LOGIC_VECTOR(31 DOWNTO 0) := (OTHERS => '0');
+SIGNAL   WRITE_ADDR              : STD_LOGIC_VECTOR(31 DOWNTO 0) := (OTHERS => '0');
+SIGNAL   READ_ADDR               : STD_LOGIC_VECTOR(31 DOWNTO 0) := (OTHERS => '0');
+SIGNAL   DINA_INT                : STD_LOGIC_VECTOR(95 DOWNTO 0) := (OTHERS => '0');
+SIGNAL   DO_WRITE                : STD_LOGIC := '0';
+SIGNAL   DO_READ                 : STD_LOGIC := '0';
+SIGNAL   DO_READ_R               : STD_LOGIC := '0';
+SIGNAL   DO_READ_REG             : STD_LOGIC_VECTOR(5 DOWNTO 0) :=(OTHERS => '0');
+SIGNAL   PORTA_WR                : STD_LOGIC:='0';
+SIGNAL   COUNT                   : INTEGER :=0;
+SIGNAL   INCR_WR_CNT             : STD_LOGIC:='0';
+SIGNAL   PORTA_WR_COMPLETE       : STD_LOGIC :='0';
+SIGNAL   PORTB_RD                : STD_LOGIC:='0';
+SIGNAL   COUNT_RD                : INTEGER :=0;
+SIGNAL   INCR_RD_CNT             : STD_LOGIC:='0';
+SIGNAL   PORTB_RD_COMPLETE       : STD_LOGIC :='0';
+SIGNAL   LATCH_PORTA_WR_COMPLETE : STD_LOGIC :='0';
+SIGNAL   PORTB_RD_HAPPENED       : STD_LOGIC := '0';
+SIGNAL   PORTA_WR_L1             :STD_LOGIC  := '0';
+SIGNAL   PORTA_WR_L2             :STD_LOGIC  := '0';
+SIGNAL   PORTB_RD_R2             :STD_LOGIC  := '0';
+SIGNAL   PORTB_RD_R1             :STD_LOGIC  := '0';
+SIGNAL   LATCH_PORTB_RD_COMPLETE : STD_LOGIC :='0';
+SIGNAL   PORTA_WR_HAPPENED       : STD_LOGIC := '0';
+SIGNAL   PORTB_RD_L1             : STD_LOGIC  := '0';
+SIGNAL   PORTB_RD_L2             : STD_LOGIC  := '0';
+SIGNAL   PORTA_WR_R2             : STD_LOGIC  := '0';
+SIGNAL   PORTA_WR_R1             : STD_LOGIC  := '0';
+
+CONSTANT WR_RD_DEEP_COUNT :INTEGER :=8;
+CONSTANT WR_DEEP_COUNT    : INTEGER := if_then_else((13 <= 13),WR_RD_DEEP_COUNT,
+                                              ((96/96)*WR_RD_DEEP_COUNT));
+CONSTANT RD_DEEP_COUNT    : INTEGER := if_then_else((13 <= 13),WR_RD_DEEP_COUNT,
+                                              ((96/96)*WR_RD_DEEP_COUNT));
+
+BEGIN
+
+   ADDRA <= WRITE_ADDR(12 DOWNTO 0) ;
+   DINA  <= DINA_INT ;
+   ADDRB <= READ_ADDR(12 DOWNTO 0) when (DO_READ='1') else (OTHERS=>'0');
+   CHECK_DATA <= DO_READ;
+
+  RD_ADDR_GEN_INST:ENTITY work.ADDR_GEN
+    GENERIC MAP(
+      C_MAX_DEPTH => 4501 ,
+      RST_INC => 1    )
+    PORT MAP(
+       CLK        => CLKB,
+       RST        => TB_RST,
+       EN         => DO_READ,
+       LOAD       => '0',
+   	   LOAD_VALUE => ZERO,
+       ADDR_OUT   => READ_ADDR
+    );
+
+  WR_ADDR_GEN_INST:ENTITY work.ADDR_GEN
+    GENERIC MAP( 
+      C_MAX_DEPTH => 4501,
+      RST_INC => 1    )
+    PORT MAP(
+       CLK        => CLKA,
+       RST        => TB_RST,
+  	   EN         => DO_WRITE,
+       LOAD       => '0',
+       LOAD_VALUE => ZERO,
+  	   ADDR_OUT   => WRITE_ADDR
+      );
+
+  WR_DATA_GEN_INST:ENTITY work.DATA_GEN 
+    GENERIC MAP ( 
+       DATA_GEN_WIDTH => 96,
+       DOUT_WIDTH     => 96 ,
+       DATA_PART_CNT  => 1,
+       SEED           => 2)
+    PORT MAP (
+       CLK      => CLKA,
+	   RST      => TB_RST,
+       EN       => DO_WRITE,
+       DATA_OUT => DINA_INT          
+    );
+
+
+  PORTA_WR_PROCESS: PROCESS(CLKA)
+  BEGIN
+    IF(RISING_EDGE(CLKA)) THEN
+      IF(TB_RST='1') THEN
+        PORTA_WR<='1';
+      ELSE
+        PORTA_WR<=PORTB_RD_COMPLETE;
+      END IF;
+    END IF;
+  END PROCESS;
+
+  PORTB_RD_PROCESS: PROCESS(CLKB)
+  BEGIN
+    IF(RISING_EDGE(CLKB)) THEN
+      IF(TB_RST='1') THEN
+        PORTB_RD<='0';
+      ELSE
+        PORTB_RD<=PORTA_WR_L2;
+      END IF;
+    END IF;
+  END PROCESS;
+
+  PORTB_RD_COMPLETE_LATCH: PROCESS(CLKB) 
+    BEGIN
+    IF(RISING_EDGE(CLKB)) THEN
+      IF(TB_RST='1') THEN
+        LATCH_PORTB_RD_COMPLETE<='0';
+      ELSIF(PORTB_RD_COMPLETE='1') THEN
+        LATCH_PORTB_RD_COMPLETE <='1';
+      ELSIF(PORTA_WR_HAPPENED='1') THEN
+        LATCH_PORTB_RD_COMPLETE<='0';
+      END IF;
+    END IF;
+  END PROCESS;
+  
+  PROCESS(CLKA)
+  BEGIN
+    IF(RISING_EDGE(CLKA)) THEN
+      IF(TB_RST='1') THEN
+        PORTB_RD_L1 <='0';
+        PORTB_RD_L2 <='0';
+      ELSE
+       PORTB_RD_L1 <= LATCH_PORTB_RD_COMPLETE;
+       PORTB_RD_L2 <= PORTB_RD_L1;
+      END IF;
+   END IF;
+  END PROCESS;
+  
+  PROCESS(CLKB)
+  BEGIN
+    IF(RISING_EDGE(CLKB)) THEN
+      IF(TB_RST='1') THEN
+        PORTA_WR_R1 <='0';
+        PORTA_WR_R2 <='0';
+      ELSE
+       PORTA_WR_R1 <= PORTA_WR;
+       PORTA_WR_R2 <= PORTA_WR_R1;
+      END IF;
+   END IF;
+  END PROCESS;
+  
+  PORTA_WR_HAPPENED <= PORTA_WR_R2;
+  
+  PORTA_WR_COMPLETE_LATCH: PROCESS(CLKA) 
+    BEGIN
+    IF(RISING_EDGE(CLKA)) THEN
+      IF(TB_RST='1') THEN
+        LATCH_PORTA_WR_COMPLETE<='0';
+      ELSIF(PORTA_WR_COMPLETE='1') THEN
+        LATCH_PORTA_WR_COMPLETE <='1';
+      --ELSIF(PORTB_RD_HAPPENED='1') THEN
+      ELSE
+        LATCH_PORTA_WR_COMPLETE<='0';
+      END IF;
+    END IF;
+  END PROCESS;
+  
+  PROCESS(CLKB)
+  BEGIN
+    IF(RISING_EDGE(CLKB)) THEN
+      IF(TB_RST='1') THEN
+        PORTA_WR_L1 <='0';
+        PORTA_WR_L2 <='0';
+      ELSE
+       PORTA_WR_L1 <= LATCH_PORTA_WR_COMPLETE;
+       PORTA_WR_L2 <= PORTA_WR_L1;
+      END IF;
+   END IF;
+  END PROCESS;
+  
+  PROCESS(CLKA)
+  BEGIN
+    IF(RISING_EDGE(CLKA)) THEN
+      IF(TB_RST='1') THEN
+        PORTB_RD_R1 <='0';
+        PORTB_RD_R2 <='0';
+      ELSE
+       PORTB_RD_R1 <= PORTB_RD;
+       PORTB_RD_R2 <= PORTB_RD_R1;
+      END IF;
+   END IF;
+  END PROCESS;
+  
+  PORTB_RD_HAPPENED <= PORTB_RD_R2;
+  
+  PORTB_RD_COMPLETE <= '1' when (count_rd=RD_DEEP_COUNT) else '0';
+  
+  start_rd_counter: process(clkb)
+  begin
+    if(rising_edge(clkb)) then
+      if(tb_rst='1') then
+         incr_rd_cnt <= '0';
+       elsif(portb_rd ='1') then
+         incr_rd_cnt <='1';
+       elsif(portb_rd_complete='1') then
+         incr_rd_cnt <='0';
+       end if;
+    end if;
+  end process;
+  
+  RD_COUNTER: process(clkb)
+  begin
+    if(rising_edge(clkb)) then
+      if(tb_rst='1') then
+        count_rd <= 0;
+      elsif(incr_rd_cnt='1') then
+        count_rd<=count_rd+1;
+      end if;
+      --if(count_rd=(wr_rd_deep_count)) then
+     if(count_rd=(RD_DEEP_COUNT)) then
+        count_rd<=0;
+      end if;
+   end if;
+  end process;
+  
+  DO_READ<='1' when (count_rd <RD_DEEP_COUNT and incr_rd_cnt='1') else '0';
+  
+  PORTA_WR_COMPLETE <= '1' when (count=WR_DEEP_COUNT) else '0';
+  
+  start_counter: process(clka)
+  begin
+    if(rising_edge(clka)) then
+      if(tb_rst='1') then
+         incr_wr_cnt <= '0';
+       elsif(porta_wr ='1') then
+         incr_wr_cnt <='1';
+       elsif(porta_wr_complete='1') then
+         incr_wr_cnt <='0';
+       end if;
+    end if;
+  end process;
+  
+  COUNTER: process(clka)
+  begin
+    if(rising_edge(clka)) then
+      if(tb_rst='1') then
+        count <= 0;
+      elsif(incr_wr_cnt='1') then
+        count<=count+1;
+      end if;
+      if(count=(WR_DEEP_COUNT)) then
+        count<=0;
+      end if;
+   end if;
+  end process;
+  
+  DO_WRITE<='1' when (count <WR_DEEP_COUNT and incr_wr_cnt='1') else '0';
+  
+  
+  BEGIN_SHIFT_REG: FOR I IN 0 TO 5 GENERATE
+  BEGIN
+    DFF_RIGHT: IF I=0 GENERATE
+    BEGIN
+      SHIFT_INST_0: ENTITY work.REGISTER_LOGIC
+        PORT MAP(
+           Q    => DO_READ_REG(0),
+           CLK  => CLKB,
+           RST  => TB_RST,
+           D    => DO_READ
+        );
+     END GENERATE DFF_RIGHT;
+
+    DFF_OTHERS: IF ((I>0) AND (I<=5)) GENERATE
+    BEGIN
+      SHIFT_INST: ENTITY work.REGISTER_LOGIC
+        PORT MAP(
+           Q   => DO_READ_REG(I),
+           CLK =>CLKB,
+           RST =>TB_RST,
+           D   =>DO_READ_REG(I-1)
+        );
+    END GENERATE DFF_OTHERS;
+ END GENERATE BEGIN_SHIFT_REG;
+  
+ REGCE_PROCESS: PROCESS(CLKB) 
+   BEGIN
+     IF(RISING_EDGE(CLKB)) THEN
+       IF(TB_RST='1') THEN
+ 	     DO_READ_R <= '0';
+       ELSE
+ 	     DO_READ_R <= DO_READ;
+       END IF;
+     END IF;
+ END PROCESS;
+
+ 
+   ENA <= DO_WRITE ;
+ 
+   WEA(0) <= DO_WRITE ;
+ 
+
+END ARCHITECTURE;
+
+
+
+
+

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/SweepConfigMem/simulation/bmg_tb_pkg.vhd

@@ -0,0 +1,200 @@
+
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7_3 Core - Testbench Package 
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006_3010 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+
+--------------------------------------------------------------------------------
+--
+-- Filename: bmg_tb_pkg.vhd
+--
+-- Description:
+--   BMG Testbench Package files
+--
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: Sep 12, 2011 - First Release
+--------------------------------------------------------------------------------
+--
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+
+PACKAGE BMG_TB_PKG IS
+
+ FUNCTION DIVROUNDUP (
+    DATA_VALUE : INTEGER;
+    DIVISOR : INTEGER)
+ RETURN INTEGER;
+ ------------------------
+ FUNCTION IF_THEN_ELSE (
+    CONDITION : BOOLEAN;
+    TRUE_CASE : STD_LOGIC_VECTOR;
+    FALSE_CASE : STD_LOGIC_VECTOR)
+  RETURN STD_LOGIC_VECTOR;
+ ------------------------ 
+ FUNCTION IF_THEN_ELSE (
+   CONDITION : BOOLEAN;
+   TRUE_CASE : STRING;
+   FALSE_CASE :STRING)
+ RETURN STRING;
+ ------------------------ 
+ FUNCTION IF_THEN_ELSE (
+   CONDITION : BOOLEAN;
+   TRUE_CASE : STD_LOGIC;
+   FALSE_CASE :STD_LOGIC)
+ RETURN STD_LOGIC;
+ ------------------------ 
+ FUNCTION IF_THEN_ELSE (
+   CONDITION : BOOLEAN;
+   TRUE_CASE : INTEGER;
+   FALSE_CASE : INTEGER)
+ RETURN INTEGER;
+ ------------------------ 
+ FUNCTION LOG2ROUNDUP (
+      DATA_VALUE : INTEGER)
+ RETURN INTEGER; 
+
+END BMG_TB_PKG;
+
+PACKAGE BODY BMG_TB_PKG IS
+
+ FUNCTION DIVROUNDUP (
+    DATA_VALUE : INTEGER;
+    DIVISOR : INTEGER)
+  RETURN INTEGER IS
+    VARIABLE DIV                   : INTEGER;
+  BEGIN
+    DIV   := DATA_VALUE/DIVISOR;
+    IF ( (DATA_VALUE MOD DIVISOR) /= 0) THEN
+      DIV := DIV+1;
+    END IF;
+    RETURN DIV;
+  END DIVROUNDUP;
+  ---------------------------------
+    FUNCTION IF_THEN_ELSE (
+    CONDITION : BOOLEAN;
+    TRUE_CASE : STD_LOGIC_VECTOR;
+    FALSE_CASE : STD_LOGIC_VECTOR)
+    RETURN STD_LOGIC_VECTOR IS
+    BEGIN
+       IF NOT CONDITION THEN
+          RETURN FALSE_CASE;
+       ELSE
+          RETURN TRUE_CASE;
+      END IF;
+   END IF_THEN_ELSE;
+  ---------------------------------
+    FUNCTION IF_THEN_ELSE (
+    CONDITION : BOOLEAN;
+    TRUE_CASE : STD_LOGIC;
+    FALSE_CASE : STD_LOGIC)
+    RETURN STD_LOGIC IS
+    BEGIN
+       IF NOT CONDITION THEN
+          RETURN FALSE_CASE;
+       ELSE
+          RETURN TRUE_CASE;
+      END IF;
+   END IF_THEN_ELSE;
+  ---------------------------------
+  FUNCTION IF_THEN_ELSE (
+    CONDITION : BOOLEAN;
+    TRUE_CASE : INTEGER;
+    FALSE_CASE : INTEGER)
+  RETURN INTEGER IS
+    VARIABLE RETVAL : INTEGER := 0;
+  BEGIN
+    IF CONDITION=FALSE THEN
+      RETVAL:=FALSE_CASE;
+    ELSE
+      RETVAL:=TRUE_CASE;
+    END IF;
+    RETURN RETVAL;
+  END IF_THEN_ELSE;
+  ---------------------------------
+  FUNCTION IF_THEN_ELSE (
+    CONDITION : BOOLEAN;
+    TRUE_CASE : STRING;
+    FALSE_CASE : STRING)
+  RETURN STRING IS
+    BEGIN
+     IF NOT CONDITION THEN
+        RETURN FALSE_CASE;
+     ELSE
+        RETURN TRUE_CASE;
+     END IF;
+ END IF_THEN_ELSE;
+  ------------------------------- 
+  FUNCTION LOG2ROUNDUP (
+      DATA_VALUE : INTEGER)
+    RETURN INTEGER IS
+      VARIABLE WIDTH       : INTEGER := 0;
+      VARIABLE CNT         : INTEGER := 1;
+    BEGIN
+      IF (DATA_VALUE <= 1) THEN
+        WIDTH   := 1;
+      ELSE
+        WHILE (CNT < DATA_VALUE) LOOP
+          WIDTH := WIDTH + 1;
+          CNT   := CNT *2;
+        END LOOP;
+      END IF;
+      RETURN WIDTH;
+    END LOG2ROUNDUP;
+
+END BMG_TB_PKG;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/SweepConfigMem/simulation/checker.vhd

@@ -0,0 +1,161 @@
+
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7_3 Core - Checker
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006_3010 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+
+--------------------------------------------------------------------------------
+--
+-- Filename: checker.vhd
+--
+-- Description:
+--   Checker
+--
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: Sep 12, 2011 - First Release
+--------------------------------------------------------------------------------
+--
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+
+LIBRARY work;
+USE work.BMG_TB_PKG.ALL;
+
+ENTITY CHECKER IS
+  GENERIC ( WRITE_WIDTH : INTEGER :=32;
+            READ_WIDTH  : INTEGER :=32
+  );
+        
+  PORT (
+        CLK      : IN STD_LOGIC;
+        RST      : IN STD_LOGIC;
+        EN       : IN STD_LOGIC; 
+        DATA_IN  : IN STD_LOGIC_VECTOR (READ_WIDTH-1 DOWNTO 0);   --OUTPUT VECTOR          
+        STATUS   : OUT STD_LOGIC:= '0'
+  );
+END CHECKER;
+
+ARCHITECTURE CHECKER_ARCH OF CHECKER IS
+  SIGNAL EXPECTED_DATA : STD_LOGIC_VECTOR(READ_WIDTH-1 DOWNTO 0);
+  SIGNAL DATA_IN_R: STD_LOGIC_VECTOR(READ_WIDTH-1 DOWNTO 0);
+  SIGNAL EN_R : STD_LOGIC := '0';
+  SIGNAL EN_2R : STD_LOGIC := '0';
+--DATA PART CNT DEFINES THE ASPECT RATIO AND GIVES THE INFO TO THE DATA GENERATOR TO PROVIDE THE DATA EITHER IN PARTS OR COMPLETE DATA IN ONE SHOT
+--IF READ_WIDTH > WRITE_WIDTH DIVROUNDUP RESULTS IN '1' AND DATA GENERATOR GIVES THE DATAOUT EQUALS TO MAX OF (WRITE_WIDTH, READ_WIDTH)
+--IF READ_WIDTH < WRITE-WIDTH DIVROUNDUP RESULTS IN > '1' AND DATA GENERATOR GIVES THE DATAOUT IN TERMS OF PARTS(EG 4 PARTS WHEN WRITE_WIDTH 32 AND READ WIDTH 8)
+  CONSTANT DATA_PART_CNT: INTEGER:= DIVROUNDUP(WRITE_WIDTH,READ_WIDTH);
+  CONSTANT MAX_WIDTH: INTEGER:= IF_THEN_ELSE((WRITE_WIDTH>READ_WIDTH),WRITE_WIDTH,READ_WIDTH);
+  SIGNAL ERR_HOLD : STD_LOGIC :='0';
+  SIGNAL ERR_DET : STD_LOGIC :='0';
+BEGIN
+   PROCESS(CLK)
+   BEGIN
+     IF(RISING_EDGE(CLK)) THEN
+       IF(RST= '1') THEN
+     	  EN_R <= '0';
+     	  EN_2R <= '0';
+          DATA_IN_R <= (OTHERS=>'0');
+       ELSE
+	      EN_R <= EN;
+	      EN_2R <= EN_R;
+          DATA_IN_R <= DATA_IN;
+       END IF;        
+     END IF;
+   END PROCESS;
+
+   EXPECTED_DATA_GEN_INST:ENTITY work.DATA_GEN 
+      GENERIC MAP ( DATA_GEN_WIDTH =>MAX_WIDTH,
+                    DOUT_WIDTH     => READ_WIDTH,
+         		    DATA_PART_CNT  => DATA_PART_CNT,
+	                SEED           => 2
+      )
+      PORT MAP (
+            CLK      => CLK,
+			RST      => RST,
+            EN       => EN_2R,
+            DATA_OUT => EXPECTED_DATA
+	  );
+
+   PROCESS(CLK)
+   BEGIN
+      IF(RISING_EDGE(CLK)) THEN
+         IF(EN_2R='1') THEN
+        	 IF(EXPECTED_DATA = DATA_IN_R) THEN
+	            ERR_DET<='0';
+        	 ELSE
+	            ERR_DET<= '1';
+        	 END IF;
+         END IF;
+     END IF;
+   END PROCESS;
+
+   PROCESS(CLK,RST)
+   BEGIN
+	  IF(RST='1') THEN
+		 ERR_HOLD <= '0';
+      ELSIF(RISING_EDGE(CLK)) THEN
+         ERR_HOLD <= ERR_HOLD  OR ERR_DET ;
+      END IF;
+   END PROCESS;
+
+   STATUS <= ERR_HOLD;
+
+END ARCHITECTURE;
+
+
+

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/SweepConfigMem/simulation/data_gen.vhd

@@ -0,0 +1,140 @@
+
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7_3 Core - Data Generator
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006_3010 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+
+--------------------------------------------------------------------------------
+--
+-- Filename: data_gen.vhd
+--
+-- Description:
+--   Data Generator
+--
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: Sep 12, 2011 - First Release
+--------------------------------------------------------------------------------
+--
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+
+LIBRARY work;
+USE work.BMG_TB_PKG.ALL;
+
+ENTITY DATA_GEN IS
+  GENERIC ( DATA_GEN_WIDTH : INTEGER := 32;
+            DOUT_WIDTH     : INTEGER := 32;
+            DATA_PART_CNT  : INTEGER := 1;
+            SEED           : INTEGER := 2
+  );
+        
+  PORT (
+        CLK      : IN STD_LOGIC;
+        RST      : IN STD_LOGIC;
+        EN       : IN STD_LOGIC; 
+        DATA_OUT : OUT STD_LOGIC_VECTOR (DOUT_WIDTH-1 DOWNTO 0)   --OUTPUT VECTOR           
+  );
+END DATA_GEN;
+
+ARCHITECTURE DATA_GEN_ARCH OF DATA_GEN IS
+  CONSTANT LOOP_COUNT     : INTEGER   := DIVROUNDUP(DATA_GEN_WIDTH,8);
+  SIGNAL   RAND_DATA      : STD_LOGIC_VECTOR(8*LOOP_COUNT-1 DOWNTO 0);
+  SIGNAL   LOCAL_DATA_OUT : STD_LOGIC_VECTOR(DATA_GEN_WIDTH-1 DOWNTO 0);
+  SIGNAL   LOCAL_CNT      : INTEGER   :=1;
+  SIGNAL   DATA_GEN_I     : STD_LOGIC :='0';
+BEGIN
+
+  LOCAL_DATA_OUT <= RAND_DATA(DATA_GEN_WIDTH-1 DOWNTO 0);
+  DATA_OUT       <= LOCAL_DATA_OUT(((DOUT_WIDTH*LOCAL_CNT)-1) DOWNTO ((DOUT_WIDTH*LOCAL_CNT)-DOUT_WIDTH));
+  DATA_GEN_I     <= '0' WHEN (LOCAL_CNT < DATA_PART_CNT) ELSE EN;
+
+  PROCESS(CLK)
+  BEGIN
+     IF(RISING_EDGE (CLK)) THEN
+        IF(EN ='1' AND (DATA_PART_CNT =1)) THEN
+           LOCAL_CNT <=1;
+        ELSIF(EN='1' AND (DATA_PART_CNT>1)) THEN
+           IF(LOCAL_CNT = 1) THEN
+              LOCAL_CNT <= LOCAL_CNT+1;
+           ELSIF(LOCAL_CNT < DATA_PART_CNT) THEN
+              LOCAL_CNT <= LOCAL_CNT+1;
+           ELSE
+              LOCAL_CNT <= 1;
+           END IF;
+        ELSE
+          LOCAL_CNT <= 1;
+        END IF;
+     END IF;
+  END PROCESS;
+
+  RAND_GEN:FOR N IN LOOP_COUNT-1 DOWNTO 0 GENERATE
+    RAND_GEN_INST:ENTITY work.RANDOM
+       GENERIC MAP(
+           WIDTH => 8,
+           SEED => (SEED+N) 
+       )
+       PORT MAP(
+          CLK => CLK,
+	      RST => RST,
+          EN  => DATA_GEN_I,
+          RANDOM_NUM => RAND_DATA(8*(N+1)-1 DOWNTO 8*N)
+       );
+  END GENERATE RAND_GEN;
+
+END ARCHITECTURE;
+

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/SweepConfigMem/simulation/random.vhd

@@ -0,0 +1,112 @@
+
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7_3 Core - Random Number Generator
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006_3010 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+
+--------------------------------------------------------------------------------
+--
+-- Filename: random.vhd
+--
+-- Description:
+--   Random Generator
+--
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: Sep 12, 2011 - First Release
+--------------------------------------------------------------------------------
+--
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+
+
+
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+
+
+ENTITY RANDOM IS
+  GENERIC ( WIDTH : INTEGER :=  32;
+ 	        SEED  : INTEGER :=2 
+  );
+        
+  PORT (
+     CLK        : IN STD_LOGIC;
+     RST        : IN STD_LOGIC;
+     EN         : IN STD_LOGIC;
+     RANDOM_NUM : OUT STD_LOGIC_VECTOR (WIDTH-1 DOWNTO 0)   --OUTPUT VECTOR           
+  );
+END RANDOM;
+
+ARCHITECTURE BEHAVIORAL OF RANDOM IS
+BEGIN
+  PROCESS(CLK)
+    VARIABLE RAND_TEMP : STD_LOGIC_VECTOR(WIDTH-1 DOWNTO 0):=CONV_STD_LOGIC_VECTOR(SEED,WIDTH);
+    VARIABLE TEMP      : STD_LOGIC := '0';
+  BEGIN
+    IF(RISING_EDGE(CLK)) THEN
+       IF(RST='1') THEN
+          RAND_TEMP  := CONV_STD_LOGIC_VECTOR(SEED,WIDTH);
+	   ELSE
+          IF(EN = '1') THEN
+             TEMP                        := RAND_TEMP(WIDTH-1) XOR RAND_TEMP(WIDTH-2);
+             RAND_TEMP(WIDTH-1 DOWNTO 1) := RAND_TEMP(WIDTH-2 DOWNTO 0);
+             RAND_TEMP(0)                := TEMP;
+          END IF;
+       END IF;
+    END IF;
+    RANDOM_NUM <= RAND_TEMP;
+  END PROCESS;
+END ARCHITECTURE;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/VCO_Mem.gise

@@ -0,0 +1,53 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<generated_project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
+
+  <!--                                                          -->
+
+  <!--             For tool use only. Do not edit.              -->
+
+  <!--                                                          -->
+
+  <!-- ProjectNavigator created generated project file.         -->
+
+  <!-- For use in tracking generated file and other information -->
+
+  <!-- allowing preservation of process status.                 -->
+
+  <!--                                                          -->
+
+  <!-- Copyright (c) 1995-2013 Xilinx, Inc.  All rights reserved. -->
+
+  <version xmlns="http://www.xilinx.com/XMLSchema">11.1</version>
+
+  <sourceproject xmlns="http://www.xilinx.com/XMLSchema" xil_pn:fileType="FILE_XISE" xil_pn:name="VCO_Mem.xise"/>
+
+  <files xmlns="http://www.xilinx.com/XMLSchema">
+    <file xil_pn:fileType="FILE_ASY" xil_pn:name="VCO_Mem.asy" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_SYMBOL" xil_pn:name="VCO_Mem.sym" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_VHO" xil_pn:name="VCO_Mem.vho" xil_pn:origination="imported"/>
+  </files>
+
+  <transforms xmlns="http://www.xilinx.com/XMLSchema">
+    <transform xil_pn:end_ts="1654646662" xil_pn:name="TRAN_copyInitialToXSTAbstractSynthesis" xil_pn:start_ts="1654646662">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_schematicsToHdl" xil_pn:prop_ck="9157515098364838426" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_regenerateCores" xil_pn:prop_ck="5794461498655324265" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_SubProjectAbstractToPreProxy" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_xawsTohdl" xil_pn:prop_ck="-5036159626982002724" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+  </transforms>
+
+</generated_project>

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/VCO_Mem.vhd

@@ -0,0 +1,149 @@
+--------------------------------------------------------------------------------
+--    This file is owned and controlled by Xilinx and must be used solely     --
+--    for design, simulation, implementation and creation of design files     --
+--    limited to Xilinx devices or technologies. Use with non-Xilinx          --
+--    devices or technologies is expressly prohibited and immediately         --
+--    terminates your license.                                                --
+--                                                                            --
+--    XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" SOLELY    --
+--    FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR XILINX DEVICES.  BY    --
+--    PROVIDING THIS DESIGN, CODE, OR INFORMATION AS ONE POSSIBLE             --
+--    IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, XILINX IS      --
+--    MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE FROM ANY      --
+--    CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING ANY       --
+--    RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY       --
+--    DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE   --
+--    IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR          --
+--    REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF         --
+--    INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A   --
+--    PARTICULAR PURPOSE.                                                     --
+--                                                                            --
+--    Xilinx products are not intended for use in life support appliances,    --
+--    devices, or systems.  Use in such applications are expressly            --
+--    prohibited.                                                             --
+--                                                                            --
+--    (c) Copyright 1995-2022 Xilinx, Inc.                                    --
+--    All rights reserved.                                                    --
+--------------------------------------------------------------------------------
+--------------------------------------------------------------------------------
+-- You must compile the wrapper file VCO_Mem.vhd when simulating
+-- the core, VCO_Mem. When compiling the wrapper file, be sure to
+-- reference the XilinxCoreLib VHDL simulation library. For detailed
+-- instructions, please refer to the "CORE Generator Help".
+
+-- The synthesis directives "translate_off/translate_on" specified
+-- below are supported by Xilinx, Mentor Graphics and Synplicity
+-- synthesis tools. Ensure they are correct for your synthesis tool(s).
+
+LIBRARY ieee;
+USE ieee.std_logic_1164.ALL;
+-- synthesis translate_off
+LIBRARY XilinxCoreLib;
+-- synthesis translate_on
+ENTITY VCO_Mem IS
+  PORT (
+    clka : IN STD_LOGIC;
+    wea : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    addra : IN STD_LOGIC_VECTOR(5 DOWNTO 0);
+    dina : IN STD_LOGIC_VECTOR(15 DOWNTO 0);
+    clkb : IN STD_LOGIC;
+    addrb : IN STD_LOGIC_VECTOR(5 DOWNTO 0);
+    doutb : OUT STD_LOGIC_VECTOR(15 DOWNTO 0)
+  );
+END VCO_Mem;
+
+ARCHITECTURE VCO_Mem_a OF VCO_Mem IS
+-- synthesis translate_off
+COMPONENT wrapped_VCO_Mem
+  PORT (
+    clka : IN STD_LOGIC;
+    wea : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    addra : IN STD_LOGIC_VECTOR(5 DOWNTO 0);
+    dina : IN STD_LOGIC_VECTOR(15 DOWNTO 0);
+    clkb : IN STD_LOGIC;
+    addrb : IN STD_LOGIC_VECTOR(5 DOWNTO 0);
+    doutb : OUT STD_LOGIC_VECTOR(15 DOWNTO 0)
+  );
+END COMPONENT;
+
+-- Configuration specification
+  FOR ALL : wrapped_VCO_Mem USE ENTITY XilinxCoreLib.blk_mem_gen_v7_3(behavioral)
+    GENERIC MAP (
+      c_addra_width => 6,
+      c_addrb_width => 6,
+      c_algorithm => 1,
+      c_axi_id_width => 4,
+      c_axi_slave_type => 0,
+      c_axi_type => 1,
+      c_byte_size => 9,
+      c_common_clk => 0,
+      c_default_data => "0",
+      c_disable_warn_bhv_coll => 0,
+      c_disable_warn_bhv_range => 0,
+      c_enable_32bit_address => 0,
+      c_family => "spartan6",
+      c_has_axi_id => 0,
+      c_has_ena => 0,
+      c_has_enb => 0,
+      c_has_injecterr => 0,
+      c_has_mem_output_regs_a => 0,
+      c_has_mem_output_regs_b => 0,
+      c_has_mux_output_regs_a => 0,
+      c_has_mux_output_regs_b => 0,
+      c_has_regcea => 0,
+      c_has_regceb => 0,
+      c_has_rsta => 0,
+      c_has_rstb => 0,
+      c_has_softecc_input_regs_a => 0,
+      c_has_softecc_output_regs_b => 0,
+      c_init_file => "BlankString",
+      c_init_file_name => "no_coe_file_loaded",
+      c_inita_val => "0",
+      c_initb_val => "0",
+      c_interface_type => 0,
+      c_load_init_file => 0,
+      c_mem_type => 1,
+      c_mux_pipeline_stages => 0,
+      c_prim_type => 1,
+      c_read_depth_a => 64,
+      c_read_depth_b => 64,
+      c_read_width_a => 16,
+      c_read_width_b => 16,
+      c_rst_priority_a => "CE",
+      c_rst_priority_b => "CE",
+      c_rst_type => "SYNC",
+      c_rstram_a => 0,
+      c_rstram_b => 0,
+      c_sim_collision_check => "ALL",
+      c_use_bram_block => 0,
+      c_use_byte_wea => 0,
+      c_use_byte_web => 0,
+      c_use_default_data => 0,
+      c_use_ecc => 0,
+      c_use_softecc => 0,
+      c_wea_width => 1,
+      c_web_width => 1,
+      c_write_depth_a => 64,
+      c_write_depth_b => 64,
+      c_write_mode_a => "WRITE_FIRST",
+      c_write_mode_b => "WRITE_FIRST",
+      c_write_width_a => 16,
+      c_write_width_b => 16,
+      c_xdevicefamily => "spartan6"
+    );
+-- synthesis translate_on
+BEGIN
+-- synthesis translate_off
+U0 : wrapped_VCO_Mem
+  PORT MAP (
+    clka => clka,
+    wea => wea,
+    addra => addra,
+    dina => dina,
+    clkb => clkb,
+    addrb => addrb,
+    doutb => doutb
+  );
+-- synthesis translate_on
+
+END VCO_Mem_a;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/result_bram.gise

@@ -0,0 +1,32 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<generated_project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
+
+  <!--                                                          -->
+
+  <!--             For tool use only. Do not edit.              -->
+
+  <!--                                                          -->
+
+  <!-- ProjectNavigator created generated project file.         -->
+
+  <!-- For use in tracking generated file and other information -->
+
+  <!-- allowing preservation of process status.                 -->
+
+  <!--                                                          -->
+
+  <!-- Copyright (c) 1995-2013 Xilinx, Inc.  All rights reserved. -->
+
+  <version xmlns="http://www.xilinx.com/XMLSchema">11.1</version>
+
+  <sourceproject xmlns="http://www.xilinx.com/XMLSchema" xil_pn:fileType="FILE_XISE" xil_pn:name="result_bram.xise"/>
+
+  <files xmlns="http://www.xilinx.com/XMLSchema">
+    <file xil_pn:fileType="FILE_ASY" xil_pn:name="result_bram.asy" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_SYMBOL" xil_pn:name="result_bram.sym" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_VHO" xil_pn:name="result_bram.vho" xil_pn:origination="imported"/>
+  </files>
+
+  <transforms xmlns="http://www.xilinx.com/XMLSchema"/>
+
+</generated_project>

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/result_bram.vhd

@@ -0,0 +1,149 @@
+--------------------------------------------------------------------------------
+--    This file is owned and controlled by Xilinx and must be used solely     --
+--    for design, simulation, implementation and creation of design files     --
+--    limited to Xilinx devices or technologies. Use with non-Xilinx          --
+--    devices or technologies is expressly prohibited and immediately         --
+--    terminates your license.                                                --
+--                                                                            --
+--    XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" SOLELY    --
+--    FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR XILINX DEVICES.  BY    --
+--    PROVIDING THIS DESIGN, CODE, OR INFORMATION AS ONE POSSIBLE             --
+--    IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, XILINX IS      --
+--    MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE FROM ANY      --
+--    CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING ANY       --
+--    RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY       --
+--    DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE   --
+--    IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR          --
+--    REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF         --
+--    INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A   --
+--    PARTICULAR PURPOSE.                                                     --
+--                                                                            --
+--    Xilinx products are not intended for use in life support appliances,    --
+--    devices, or systems.  Use in such applications are expressly            --
+--    prohibited.                                                             --
+--                                                                            --
+--    (c) Copyright 1995-2020 Xilinx, Inc.                                    --
+--    All rights reserved.                                                    --
+--------------------------------------------------------------------------------
+--------------------------------------------------------------------------------
+-- You must compile the wrapper file result_bram.vhd when simulating
+-- the core, result_bram. When compiling the wrapper file, be sure to
+-- reference the XilinxCoreLib VHDL simulation library. For detailed
+-- instructions, please refer to the "CORE Generator Help".
+
+-- The synthesis directives "translate_off/translate_on" specified
+-- below are supported by Xilinx, Mentor Graphics and Synplicity
+-- synthesis tools. Ensure they are correct for your synthesis tool(s).
+
+LIBRARY ieee;
+USE ieee.std_logic_1164.ALL;
+-- synthesis translate_off
+LIBRARY XilinxCoreLib;
+-- synthesis translate_on
+ENTITY result_bram IS
+  PORT (
+    clka : IN STD_LOGIC;
+    wea : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    addra : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    dina : IN STD_LOGIC_VECTOR(191 DOWNTO 0);
+    clkb : IN STD_LOGIC;
+    addrb : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    doutb : OUT STD_LOGIC_VECTOR(191 DOWNTO 0)
+  );
+END result_bram;
+
+ARCHITECTURE result_bram_a OF result_bram IS
+-- synthesis translate_off
+COMPONENT wrapped_result_bram
+  PORT (
+    clka : IN STD_LOGIC;
+    wea : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    addra : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    dina : IN STD_LOGIC_VECTOR(191 DOWNTO 0);
+    clkb : IN STD_LOGIC;
+    addrb : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    doutb : OUT STD_LOGIC_VECTOR(191 DOWNTO 0)
+  );
+END COMPONENT;
+
+-- Configuration specification
+  FOR ALL : wrapped_result_bram USE ENTITY XilinxCoreLib.blk_mem_gen_v7_3(behavioral)
+    GENERIC MAP (
+      c_addra_width => 8,
+      c_addrb_width => 8,
+      c_algorithm => 1,
+      c_axi_id_width => 4,
+      c_axi_slave_type => 0,
+      c_axi_type => 1,
+      c_byte_size => 9,
+      c_common_clk => 0,
+      c_default_data => "0",
+      c_disable_warn_bhv_coll => 0,
+      c_disable_warn_bhv_range => 0,
+      c_enable_32bit_address => 0,
+      c_family => "spartan6",
+      c_has_axi_id => 0,
+      c_has_ena => 0,
+      c_has_enb => 0,
+      c_has_injecterr => 0,
+      c_has_mem_output_regs_a => 0,
+      c_has_mem_output_regs_b => 0,
+      c_has_mux_output_regs_a => 0,
+      c_has_mux_output_regs_b => 0,
+      c_has_regcea => 0,
+      c_has_regceb => 0,
+      c_has_rsta => 0,
+      c_has_rstb => 0,
+      c_has_softecc_input_regs_a => 0,
+      c_has_softecc_output_regs_b => 0,
+      c_init_file => "BlankString",
+      c_init_file_name => "no_coe_file_loaded",
+      c_inita_val => "0",
+      c_initb_val => "0",
+      c_interface_type => 0,
+      c_load_init_file => 0,
+      c_mem_type => 1,
+      c_mux_pipeline_stages => 0,
+      c_prim_type => 1,
+      c_read_depth_a => 256,
+      c_read_depth_b => 256,
+      c_read_width_a => 192,
+      c_read_width_b => 192,
+      c_rst_priority_a => "CE",
+      c_rst_priority_b => "CE",
+      c_rst_type => "SYNC",
+      c_rstram_a => 0,
+      c_rstram_b => 0,
+      c_sim_collision_check => "ALL",
+      c_use_bram_block => 0,
+      c_use_byte_wea => 0,
+      c_use_byte_web => 0,
+      c_use_default_data => 0,
+      c_use_ecc => 0,
+      c_use_softecc => 0,
+      c_wea_width => 1,
+      c_web_width => 1,
+      c_write_depth_a => 256,
+      c_write_depth_b => 256,
+      c_write_mode_a => "WRITE_FIRST",
+      c_write_mode_b => "WRITE_FIRST",
+      c_write_width_a => 192,
+      c_write_width_b => 192,
+      c_xdevicefamily => "spartan6"
+    );
+-- synthesis translate_on
+BEGIN
+-- synthesis translate_off
+U0 : wrapped_result_bram
+  PORT MAP (
+    clka => clka,
+    wea => wea,
+    addra => addra,
+    dina => dina,
+    clkb => clkb,
+    addrb => addrb,
+    doutb => doutb
+  );
+-- synthesis translate_on
+
+END result_bram_a;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/result_bram/example_design/result_bram_exdes.ucf

@@ -0,0 +1,61 @@
+################################################################################
+#
+# (c) Copyright 2002 - 2010 Xilinx, Inc. All rights reserved.
+# 
+# This file contains confidential and proprietary information
+# of Xilinx, Inc. and is protected under U.S. and
+# international copyright and other intellectual property
+# laws.
+# 
+# DISCLAIMER
+# This disclaimer is not a license and does not grant any
+# rights to the materials distributed herewith. Except as
+# otherwise provided in a valid license issued to you by
+# Xilinx, and to the maximum extent permitted by applicable
+# law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+# (2) Xilinx shall not be liable (whether in contract or tort,
+# including negligence, or under any other theory of
+# liability) for any loss or damage of any kind or nature
+# related to, arising under or in connection with these
+# materials, including for any direct, or any indirect,
+# special, incidental, or consequential loss or damage
+# (including loss of data, profits, goodwill, or any type of
+# loss or damage suffered as a result of any action brought
+# by a third party) even if such damage or loss was
+# reasonably foreseeable or Xilinx had been advised of the
+# possibility of the same.
+# 
+# CRITICAL APPLICATIONS
+# Xilinx products are not designed or intended to be fail-
+# safe, or for use in any application requiring fail-safe
+# performance, such as life-support or safety devices or
+# systems, Class III medical devices, nuclear facilities,
+# applications related to the deployment of airbags, or any
+# other applications that could lead to death, personal
+# injury, or severe property or environmental damage
+# (individually and collectively, "Critical
+# Applications"). Customer assumes the sole risk and
+# liability of any use of Xilinx products in Critical
+# Applications, subject only to applicable laws and
+# regulations governing limitations on product liability.
+# 
+# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+# PART OF THIS FILE AT ALL TIMES.
+#
+################################################################################
+
+# Tx Core Period Constraint. This constraint can be modified, and is
+# valid as long as it is met after place and route.
+NET "CLKA"  TNM_NET     = "CLKA";
+  
+NET "CLKB"  TNM_NET     = "CLKB";
+
+TIMESPEC "TS_CLKA"      = PERIOD "CLKA"  25 MHZ;
+  
+TIMESPEC "TS_CLKB"      = PERIOD "CLKB"  25 MHZ;
+
+################################################################################

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/result_bram/example_design/result_bram_exdes.vhd

@@ -0,0 +1,179 @@
+ 
+ 
+ 
+
+
+
+
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7.1 Core - Top-level core wrapper
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006-2010 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+
+--------------------------------------------------------------------------------
+--
+-- Filename: result_bram_exdes.vhd
+--
+-- Description:
+--   This is the actual BMG core wrapper.
+--
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: August 31, 2005 - First Release
+--------------------------------------------------------------------------------
+--
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+
+LIBRARY UNISIM;
+USE UNISIM.VCOMPONENTS.ALL;
+
+--------------------------------------------------------------------------------
+-- Entity Declaration
+--------------------------------------------------------------------------------
+ENTITY result_bram_exdes IS
+  PORT (
+      --Inputs - Port A
+  
+    WEA            : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    ADDRA          : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+  
+    DINA           : IN STD_LOGIC_VECTOR(191 DOWNTO 0);
+  
+    CLKA       : IN STD_LOGIC;
+
+  
+      --Inputs - Port B
+    ADDRB          : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    DOUTB          : OUT STD_LOGIC_VECTOR(191 DOWNTO 0);
+    CLKB           : IN STD_LOGIC
+
+  );
+
+END result_bram_exdes;
+
+
+ARCHITECTURE xilinx OF result_bram_exdes IS
+
+  COMPONENT BUFG IS
+  PORT (
+     I      : IN STD_ULOGIC;
+     O      : OUT STD_ULOGIC
+  );
+  END COMPONENT;
+
+  COMPONENT result_bram IS
+  PORT (
+      --Port A
+  
+    WEA        : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    ADDRA      : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+  
+    DINA       : IN STD_LOGIC_VECTOR(191 DOWNTO 0);
+
+  
+    CLKA       : IN STD_LOGIC;
+
+  
+      --Port B
+    ADDRB      : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    DOUTB      : OUT STD_LOGIC_VECTOR(191 DOWNTO 0);
+    CLKB       : IN STD_LOGIC
+
+
+  );
+  END COMPONENT;
+
+  SIGNAL CLKA_buf     : STD_LOGIC;
+  SIGNAL CLKB_buf     : STD_LOGIC;
+  SIGNAL S_ACLK_buf   : STD_LOGIC;
+
+BEGIN
+
+  bufg_A : BUFG
+    PORT MAP (
+     I => CLKA,
+     O => CLKA_buf
+     );
+
+  bufg_B : BUFG
+    PORT MAP (
+     I => CLKB,
+     O => CLKB_buf
+     );
+
+
+  bmg0 : result_bram
+    PORT MAP (
+      --Port A
+  
+      WEA        => WEA,
+      ADDRA      => ADDRA,
+  
+      DINA       => DINA,
+
+      CLKA       => CLKA_buf,
+
+  
+      --Port B
+      ADDRB      => ADDRB,
+      DOUTB      => DOUTB,
+      CLKB       => CLKB_buf
+
+    );
+
+END xilinx;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/result_bram/example_design/result_bram_prod.vhd

@@ -0,0 +1,275 @@
+ 
+ 
+ 
+
+
+
+
+
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7.1 Core - Top-level wrapper
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006-2011 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+--
+--------------------------------------------------------------------------------
+--
+-- Filename: result_bram_prod.vhd
+--
+-- Description:
+--   This is the top-level BMG wrapper (over BMG core).
+--
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: August 31, 2005 - First Release
+--------------------------------------------------------------------------------
+--
+-- Configured Core Parameter Values:
+-- (Refer to the SIM Parameters table in the datasheet for more information on
+-- the these parameters.)
+--    C_FAMILY                    :  spartan6 
+--    C_XDEVICEFAMILY             :  spartan6 
+--    C_INTERFACE_TYPE            :  0 
+--    C_ENABLE_32BIT_ADDRESS      :  0 
+--    C_AXI_TYPE                  :  1 
+--    C_AXI_SLAVE_TYPE            :  0 
+--    C_AXI_ID_WIDTH              :  4 
+--    C_MEM_TYPE                  :  1 
+--    C_BYTE_SIZE                 :  9 
+--    C_ALGORITHM                 :  1 
+--    C_PRIM_TYPE                 :  1 
+--    C_LOAD_INIT_FILE            :  0 
+--    C_INIT_FILE_NAME            :  no_coe_file_loaded 
+--    C_USE_DEFAULT_DATA          :  0 
+--    C_DEFAULT_DATA              :  0 
+--    C_RST_TYPE                  :  SYNC 
+--    C_HAS_RSTA                  :  0 
+--    C_RST_PRIORITY_A            :  CE 
+--    C_RSTRAM_A                  :  0 
+--    C_INITA_VAL                 :  0 
+--    C_HAS_ENA                   :  0 
+--    C_HAS_REGCEA                :  0 
+--    C_USE_BYTE_WEA              :  0 
+--    C_WEA_WIDTH                 :  1 
+--    C_WRITE_MODE_A              :  WRITE_FIRST 
+--    C_WRITE_WIDTH_A             :  192 
+--    C_READ_WIDTH_A              :  192 
+--    C_WRITE_DEPTH_A             :  256 
+--    C_READ_DEPTH_A              :  256 
+--    C_ADDRA_WIDTH               :  8 
+--    C_HAS_RSTB                  :  0 
+--    C_RST_PRIORITY_B            :  CE 
+--    C_RSTRAM_B                  :  0 
+--    C_INITB_VAL                 :  0 
+--    C_HAS_ENB                   :  0 
+--    C_HAS_REGCEB                :  0 
+--    C_USE_BYTE_WEB              :  0 
+--    C_WEB_WIDTH                 :  1 
+--    C_WRITE_MODE_B              :  WRITE_FIRST 
+--    C_WRITE_WIDTH_B             :  192 
+--    C_READ_WIDTH_B              :  192 
+--    C_WRITE_DEPTH_B             :  256 
+--    C_READ_DEPTH_B              :  256 
+--    C_ADDRB_WIDTH               :  8 
+--    C_HAS_MEM_OUTPUT_REGS_A     :  0 
+--    C_HAS_MEM_OUTPUT_REGS_B     :  0 
+--    C_HAS_MUX_OUTPUT_REGS_A     :  0 
+--    C_HAS_MUX_OUTPUT_REGS_B     :  0 
+--    C_HAS_SOFTECC_INPUT_REGS_A  :  0 
+--    C_HAS_SOFTECC_OUTPUT_REGS_B :  0 
+--    C_MUX_PIPELINE_STAGES       :  0 
+--    C_USE_ECC                   :  0 
+--    C_USE_SOFTECC               :  0 
+--    C_HAS_INJECTERR             :  0 
+--    C_SIM_COLLISION_CHECK       :  ALL 
+--    C_COMMON_CLK                :  0 
+--    C_DISABLE_WARN_BHV_COLL     :  0 
+--    C_DISABLE_WARN_BHV_RANGE    :  0 
+
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+
+LIBRARY UNISIM;
+USE UNISIM.VCOMPONENTS.ALL;
+
+--------------------------------------------------------------------------------
+-- Entity Declaration
+--------------------------------------------------------------------------------
+ENTITY result_bram_prod IS
+  PORT (
+    --Port A
+    CLKA       : IN STD_LOGIC;
+    RSTA       : IN STD_LOGIC;  --opt port
+    ENA        : IN STD_LOGIC;  --optional port
+    REGCEA     : IN STD_LOGIC;  --optional port
+    WEA        : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    ADDRA      : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    DINA       : IN STD_LOGIC_VECTOR(191 DOWNTO 0);
+    DOUTA      : OUT STD_LOGIC_VECTOR(191 DOWNTO 0);
+
+    --Port B
+    CLKB       : IN STD_LOGIC;
+    RSTB       : IN STD_LOGIC;  --opt port
+    ENB        : IN STD_LOGIC;  --optional port
+    REGCEB     : IN STD_LOGIC;  --optional port
+    WEB        : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    ADDRB      : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    DINB       : IN STD_LOGIC_VECTOR(191 DOWNTO 0);
+    DOUTB      : OUT STD_LOGIC_VECTOR(191 DOWNTO 0);
+
+    --ECC
+    INJECTSBITERR  : IN STD_LOGIC; --optional port
+    INJECTDBITERR  : IN STD_LOGIC; --optional port
+    SBITERR        : OUT STD_LOGIC; --optional port
+    DBITERR        : OUT STD_LOGIC; --optional port
+    RDADDRECC      : OUT STD_LOGIC_VECTOR(7 DOWNTO 0); --optional port
+ -- AXI BMG Input and Output Port Declarations
+
+    -- AXI Global Signals
+    S_ACLK                         : IN  STD_LOGIC;
+    S_AXI_AWID                     : IN  STD_LOGIC_VECTOR(3 DOWNTO 0);
+    S_AXI_AWADDR                   : IN  STD_LOGIC_VECTOR(31 DOWNTO 0);
+    S_AXI_AWLEN                    : IN  STD_LOGIC_VECTOR(7 DOWNTO 0);
+    S_AXI_AWSIZE                   : IN  STD_LOGIC_VECTOR(2 DOWNTO 0);
+    S_AXI_AWBURST                  : IN  STD_LOGIC_VECTOR(1 DOWNTO 0);
+    S_AXI_AWVALID                  : IN  STD_LOGIC;
+    S_AXI_AWREADY                  : OUT STD_LOGIC;
+    S_AXI_WDATA                    : IN  STD_LOGIC_VECTOR(191  DOWNTO 0);
+    S_AXI_WSTRB                    : IN  STD_LOGIC_VECTOR(0  DOWNTO 0);
+    S_AXI_WLAST                    : IN  STD_LOGIC;
+    S_AXI_WVALID                   : IN  STD_LOGIC;
+    S_AXI_WREADY                   : OUT STD_LOGIC;
+    S_AXI_BID                      : OUT STD_LOGIC_VECTOR(3  DOWNTO 0):= (OTHERS => '0');
+    S_AXI_BRESP                    : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
+    S_AXI_BVALID                   : OUT STD_LOGIC;
+    S_AXI_BREADY                   : IN  STD_LOGIC;
+
+    -- AXI Full/Lite Slave Read (Write side)
+    S_AXI_ARID                     : IN  STD_LOGIC_VECTOR(3  DOWNTO 0);
+    S_AXI_ARADDR                   : IN  STD_LOGIC_VECTOR(31 DOWNTO 0);
+    S_AXI_ARLEN                    : IN  STD_LOGIC_VECTOR(7 DOWNTO 0);
+    S_AXI_ARSIZE                   : IN  STD_LOGIC_VECTOR(2 DOWNTO 0);
+    S_AXI_ARBURST                  : IN  STD_LOGIC_VECTOR(1 DOWNTO 0);
+    S_AXI_ARVALID                  : IN  STD_LOGIC;
+    S_AXI_ARREADY                  : OUT STD_LOGIC;
+    S_AXI_RID                      : OUT STD_LOGIC_VECTOR(3  DOWNTO 0):= (OTHERS => '0');
+    S_AXI_RDATA                    : OUT STD_LOGIC_VECTOR(191  DOWNTO 0);
+    S_AXI_RRESP                    : OUT STD_LOGIC_VECTOR(1 DOWNTO 0);
+    S_AXI_RLAST                    : OUT STD_LOGIC;
+    S_AXI_RVALID                   : OUT STD_LOGIC;
+    S_AXI_RREADY                   : IN  STD_LOGIC;
+
+    -- AXI Full/Lite Sideband Signals
+    S_AXI_INJECTSBITERR            : IN  STD_LOGIC;
+    S_AXI_INJECTDBITERR            : IN  STD_LOGIC;
+    S_AXI_SBITERR                  : OUT STD_LOGIC;
+    S_AXI_DBITERR                  : OUT STD_LOGIC;
+    S_AXI_RDADDRECC                : OUT STD_LOGIC_VECTOR(7  DOWNTO 0);
+    S_ARESETN                      : IN  STD_LOGIC
+
+
+  );
+
+END result_bram_prod;
+
+
+ARCHITECTURE xilinx OF result_bram_prod IS
+
+  COMPONENT result_bram_exdes IS
+  PORT (
+      --Port A
+  
+    WEA            : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    ADDRA          : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+  
+    DINA           : IN STD_LOGIC_VECTOR(191 DOWNTO 0);
+
+  
+    CLKA       : IN STD_LOGIC;
+
+  
+      --Port B
+    ADDRB          : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    DOUTB          : OUT STD_LOGIC_VECTOR(191 DOWNTO 0);
+    CLKB           : IN STD_LOGIC
+
+
+
+  );
+  END COMPONENT;
+
+BEGIN
+
+  bmg0 : result_bram_exdes
+    PORT MAP (
+      --Port A
+  
+      WEA        => WEA,
+      ADDRA      => ADDRA,
+  
+      DINA       => DINA,
+
+      CLKA       => CLKA,
+  
+      --Port B
+      ADDRB      => ADDRB,
+      DOUTB      => DOUTB,
+      CLKB       => CLKB
+
+
+
+      );
+END xilinx;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/result_bram/simulation/addr_gen.vhd

@@ -0,0 +1,117 @@
+
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7_3 Core - Address Generator
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006_3010 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+
+--------------------------------------------------------------------------------
+--
+-- Filename: addr_gen.vhd
+--
+-- Description:
+--   Address Generator
+--
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: Sep 12, 2011 - First Release
+--------------------------------------------------------------------------------
+--
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+
+LIBRARY work;
+USE work.ALL;
+
+ENTITY ADDR_GEN IS
+  GENERIC ( C_MAX_DEPTH : INTEGER :=  1024 ;
+            RST_VALUE  : STD_LOGIC_VECTOR(31 DOWNTO 0) := (OTHERS=> '0');
+            RST_INC  : INTEGER := 0);
+  PORT (
+        CLK         : IN STD_LOGIC;
+        RST         : IN STD_LOGIC;
+        EN          : IN STD_LOGIC;
+        LOAD        :IN STD_LOGIC;
+        LOAD_VALUE  : IN STD_LOGIC_VECTOR (31 DOWNTO 0)  := (OTHERS => '0');
+        ADDR_OUT    : OUT STD_LOGIC_VECTOR (31 DOWNTO 0)   --OUTPUT VECTOR           
+  );
+END ADDR_GEN;
+
+ARCHITECTURE BEHAVIORAL OF ADDR_GEN IS
+   SIGNAL ADDR_TEMP : STD_LOGIC_VECTOR(31 DOWNTO 0) := (OTHERS =>'0');
+BEGIN
+   ADDR_OUT <= ADDR_TEMP;
+   PROCESS(CLK)
+   BEGIN
+      IF(RISING_EDGE(CLK)) THEN
+         IF(RST='1') THEN
+    	    ADDR_TEMP<= RST_VALUE + conv_std_logic_vector(RST_INC,32 ); 
+         ELSE
+            IF(EN='1') THEN
+               IF(LOAD='1') THEN
+	              ADDR_TEMP <=LOAD_VALUE;
+	           ELSE
+	              IF(ADDR_TEMP = C_MAX_DEPTH-1) THEN
+         	         ADDR_TEMP<= RST_VALUE + conv_std_logic_vector(RST_INC,32 );
+	              ELSE
+	                 ADDR_TEMP <= ADDR_TEMP + '1';
+	              END IF;
+	           END IF;
+	        END IF;
+         END IF;
+      END IF;
+   END PROCESS;
+END ARCHITECTURE;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/result_bram/simulation/bmg_stim_gen.vhd

@@ -0,0 +1,434 @@
+      
+
+
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7_3 Core - Stimulus Generator For Simple Dual Port RAM
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006_3010 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+
+--------------------------------------------------------------------------------
+--
+-- Filename: bmg_stim_gen.vhd
+--
+-- Description:
+--  Stimulus Generation For SDP Configuration
+--  100 Writes and 100 Reads will be performed in a repeatitive loop till the 
+--  simulation ends
+--
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: Sep 12, 2011 - First Release
+--------------------------------------------------------------------------------
+--
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+USE IEEE.STD_LOGIC_MISC.ALL;
+
+ LIBRARY work;
+USE work.ALL;
+USE work.BMG_TB_PKG.ALL;
+
+
+ENTITY REGISTER_LOGIC IS
+  PORT(
+    Q   : OUT STD_LOGIC;
+    CLK : IN STD_LOGIC;
+    RST : IN STD_LOGIC;
+    D   : IN STD_LOGIC
+  );
+END REGISTER_LOGIC;
+
+ARCHITECTURE REGISTER_ARCH OF REGISTER_LOGIC IS
+SIGNAL Q_O : STD_LOGIC :='0';
+BEGIN
+  Q <= Q_O;
+  FF_BEH: PROCESS(CLK)
+  BEGIN
+     IF(RISING_EDGE(CLK)) THEN
+        IF(RST ='1') THEN
+           Q_O <= '0';
+        ELSE
+           Q_O <= D;
+        END IF;
+     END IF;
+  END PROCESS;
+END REGISTER_ARCH;
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+USE IEEE.STD_LOGIC_MISC.ALL;
+
+LIBRARY work;
+USE work.ALL;
+USE work.BMG_TB_PKG.ALL;
+
+
+ENTITY BMG_STIM_GEN IS
+      PORT (
+            CLKA : IN STD_LOGIC;
+            CLKB : IN STD_LOGIC;
+            TB_RST : IN STD_LOGIC;
+            ADDRA: OUT  STD_LOGIC_VECTOR(7 DOWNTO 0) := (OTHERS => '0'); 
+            DINA : OUT  STD_LOGIC_VECTOR(191 DOWNTO 0) := (OTHERS => '0'); 
+            WEA : OUT STD_LOGIC_VECTOR (0 DOWNTO 0) := (OTHERS => '0');
+            ADDRB: OUT  STD_LOGIC_VECTOR(7 DOWNTO 0) := (OTHERS => '0');
+	        CHECK_DATA: OUT STD_LOGIC:='0'
+	  );
+END BMG_STIM_GEN;
+
+
+ARCHITECTURE BEHAVIORAL OF BMG_STIM_GEN IS
+
+CONSTANT ZERO                    : STD_LOGIC_VECTOR(31 DOWNTO 0) := (OTHERS => '0');
+SIGNAL   WRITE_ADDR              : STD_LOGIC_VECTOR(31 DOWNTO 0) := (OTHERS => '0');
+SIGNAL   READ_ADDR               : STD_LOGIC_VECTOR(31 DOWNTO 0) := (OTHERS => '0');
+SIGNAL   DINA_INT                : STD_LOGIC_VECTOR(191 DOWNTO 0) := (OTHERS => '0');
+SIGNAL   DO_WRITE                : STD_LOGIC := '0';
+SIGNAL   DO_READ                 : STD_LOGIC := '0';
+SIGNAL   DO_READ_R               : STD_LOGIC := '0';
+SIGNAL   DO_READ_REG             : STD_LOGIC_VECTOR(5 DOWNTO 0) :=(OTHERS => '0');
+SIGNAL   PORTA_WR                : STD_LOGIC:='0';
+SIGNAL   COUNT                   : INTEGER :=0;
+SIGNAL   INCR_WR_CNT             : STD_LOGIC:='0';
+SIGNAL   PORTA_WR_COMPLETE       : STD_LOGIC :='0';
+SIGNAL   PORTB_RD                : STD_LOGIC:='0';
+SIGNAL   COUNT_RD                : INTEGER :=0;
+SIGNAL   INCR_RD_CNT             : STD_LOGIC:='0';
+SIGNAL   PORTB_RD_COMPLETE       : STD_LOGIC :='0';
+SIGNAL   LATCH_PORTA_WR_COMPLETE : STD_LOGIC :='0';
+SIGNAL   PORTB_RD_HAPPENED       : STD_LOGIC := '0';
+SIGNAL   PORTA_WR_L1             :STD_LOGIC  := '0';
+SIGNAL   PORTA_WR_L2             :STD_LOGIC  := '0';
+SIGNAL   PORTB_RD_R2             :STD_LOGIC  := '0';
+SIGNAL   PORTB_RD_R1             :STD_LOGIC  := '0';
+SIGNAL   LATCH_PORTB_RD_COMPLETE : STD_LOGIC :='0';
+SIGNAL   PORTA_WR_HAPPENED       : STD_LOGIC := '0';
+SIGNAL   PORTB_RD_L1             : STD_LOGIC  := '0';
+SIGNAL   PORTB_RD_L2             : STD_LOGIC  := '0';
+SIGNAL   PORTA_WR_R2             : STD_LOGIC  := '0';
+SIGNAL   PORTA_WR_R1             : STD_LOGIC  := '0';
+
+CONSTANT WR_RD_DEEP_COUNT :INTEGER :=8;
+CONSTANT WR_DEEP_COUNT    : INTEGER := if_then_else((8 <= 8),WR_RD_DEEP_COUNT,
+                                              ((192/192)*WR_RD_DEEP_COUNT));
+CONSTANT RD_DEEP_COUNT    : INTEGER := if_then_else((8 <= 8),WR_RD_DEEP_COUNT,
+                                              ((192/192)*WR_RD_DEEP_COUNT));
+
+BEGIN
+
+   ADDRA <= WRITE_ADDR(7 DOWNTO 0) ;
+   DINA  <= DINA_INT ;
+   ADDRB <= READ_ADDR(7 DOWNTO 0) when (DO_READ='1') else (OTHERS=>'0');
+   CHECK_DATA <= DO_READ;
+
+  RD_ADDR_GEN_INST:ENTITY work.ADDR_GEN
+    GENERIC MAP(
+      C_MAX_DEPTH => 256 ,
+      RST_INC => 1    )
+    PORT MAP(
+       CLK        => CLKB,
+       RST        => TB_RST,
+       EN         => DO_READ,
+       LOAD       => '0',
+   	   LOAD_VALUE => ZERO,
+       ADDR_OUT   => READ_ADDR
+    );
+
+  WR_ADDR_GEN_INST:ENTITY work.ADDR_GEN
+    GENERIC MAP( 
+      C_MAX_DEPTH => 256,
+      RST_INC => 1    )
+    PORT MAP(
+       CLK        => CLKA,
+       RST        => TB_RST,
+  	   EN         => DO_WRITE,
+       LOAD       => '0',
+       LOAD_VALUE => ZERO,
+  	   ADDR_OUT   => WRITE_ADDR
+      );
+
+  WR_DATA_GEN_INST:ENTITY work.DATA_GEN 
+    GENERIC MAP ( 
+       DATA_GEN_WIDTH => 192,
+       DOUT_WIDTH     => 192 ,
+       DATA_PART_CNT  => 1,
+       SEED           => 2)
+    PORT MAP (
+       CLK      => CLKA,
+	   RST      => TB_RST,
+       EN       => DO_WRITE,
+       DATA_OUT => DINA_INT          
+    );
+
+
+  PORTA_WR_PROCESS: PROCESS(CLKA)
+  BEGIN
+    IF(RISING_EDGE(CLKA)) THEN
+      IF(TB_RST='1') THEN
+        PORTA_WR<='1';
+      ELSE
+        PORTA_WR<=PORTB_RD_COMPLETE;
+      END IF;
+    END IF;
+  END PROCESS;
+
+  PORTB_RD_PROCESS: PROCESS(CLKB)
+  BEGIN
+    IF(RISING_EDGE(CLKB)) THEN
+      IF(TB_RST='1') THEN
+        PORTB_RD<='0';
+      ELSE
+        PORTB_RD<=PORTA_WR_L2;
+      END IF;
+    END IF;
+  END PROCESS;
+
+  PORTB_RD_COMPLETE_LATCH: PROCESS(CLKB) 
+    BEGIN
+    IF(RISING_EDGE(CLKB)) THEN
+      IF(TB_RST='1') THEN
+        LATCH_PORTB_RD_COMPLETE<='0';
+      ELSIF(PORTB_RD_COMPLETE='1') THEN
+        LATCH_PORTB_RD_COMPLETE <='1';
+      ELSIF(PORTA_WR_HAPPENED='1') THEN
+        LATCH_PORTB_RD_COMPLETE<='0';
+      END IF;
+    END IF;
+  END PROCESS;
+  
+  PROCESS(CLKA)
+  BEGIN
+    IF(RISING_EDGE(CLKA)) THEN
+      IF(TB_RST='1') THEN
+        PORTB_RD_L1 <='0';
+        PORTB_RD_L2 <='0';
+      ELSE
+       PORTB_RD_L1 <= LATCH_PORTB_RD_COMPLETE;
+       PORTB_RD_L2 <= PORTB_RD_L1;
+      END IF;
+   END IF;
+  END PROCESS;
+  
+  PROCESS(CLKB)
+  BEGIN
+    IF(RISING_EDGE(CLKB)) THEN
+      IF(TB_RST='1') THEN
+        PORTA_WR_R1 <='0';
+        PORTA_WR_R2 <='0';
+      ELSE
+       PORTA_WR_R1 <= PORTA_WR;
+       PORTA_WR_R2 <= PORTA_WR_R1;
+      END IF;
+   END IF;
+  END PROCESS;
+  
+  PORTA_WR_HAPPENED <= PORTA_WR_R2;
+  
+  PORTA_WR_COMPLETE_LATCH: PROCESS(CLKA) 
+    BEGIN
+    IF(RISING_EDGE(CLKA)) THEN
+      IF(TB_RST='1') THEN
+        LATCH_PORTA_WR_COMPLETE<='0';
+      ELSIF(PORTA_WR_COMPLETE='1') THEN
+        LATCH_PORTA_WR_COMPLETE <='1';
+      --ELSIF(PORTB_RD_HAPPENED='1') THEN
+      ELSE
+        LATCH_PORTA_WR_COMPLETE<='0';
+      END IF;
+    END IF;
+  END PROCESS;
+  
+  PROCESS(CLKB)
+  BEGIN
+    IF(RISING_EDGE(CLKB)) THEN
+      IF(TB_RST='1') THEN
+        PORTA_WR_L1 <='0';
+        PORTA_WR_L2 <='0';
+      ELSE
+       PORTA_WR_L1 <= LATCH_PORTA_WR_COMPLETE;
+       PORTA_WR_L2 <= PORTA_WR_L1;
+      END IF;
+   END IF;
+  END PROCESS;
+  
+  PROCESS(CLKA)
+  BEGIN
+    IF(RISING_EDGE(CLKA)) THEN
+      IF(TB_RST='1') THEN
+        PORTB_RD_R1 <='0';
+        PORTB_RD_R2 <='0';
+      ELSE
+       PORTB_RD_R1 <= PORTB_RD;
+       PORTB_RD_R2 <= PORTB_RD_R1;
+      END IF;
+   END IF;
+  END PROCESS;
+  
+  PORTB_RD_HAPPENED <= PORTB_RD_R2;
+  
+  PORTB_RD_COMPLETE <= '1' when (count_rd=RD_DEEP_COUNT) else '0';
+  
+  start_rd_counter: process(clkb)
+  begin
+    if(rising_edge(clkb)) then
+      if(tb_rst='1') then
+         incr_rd_cnt <= '0';
+       elsif(portb_rd ='1') then
+         incr_rd_cnt <='1';
+       elsif(portb_rd_complete='1') then
+         incr_rd_cnt <='0';
+       end if;
+    end if;
+  end process;
+  
+  RD_COUNTER: process(clkb)
+  begin
+    if(rising_edge(clkb)) then
+      if(tb_rst='1') then
+        count_rd <= 0;
+      elsif(incr_rd_cnt='1') then
+        count_rd<=count_rd+1;
+      end if;
+      --if(count_rd=(wr_rd_deep_count)) then
+     if(count_rd=(RD_DEEP_COUNT)) then
+        count_rd<=0;
+      end if;
+   end if;
+  end process;
+  
+  DO_READ<='1' when (count_rd <RD_DEEP_COUNT and incr_rd_cnt='1') else '0';
+  
+  PORTA_WR_COMPLETE <= '1' when (count=WR_DEEP_COUNT) else '0';
+  
+  start_counter: process(clka)
+  begin
+    if(rising_edge(clka)) then
+      if(tb_rst='1') then
+         incr_wr_cnt <= '0';
+       elsif(porta_wr ='1') then
+         incr_wr_cnt <='1';
+       elsif(porta_wr_complete='1') then
+         incr_wr_cnt <='0';
+       end if;
+    end if;
+  end process;
+  
+  COUNTER: process(clka)
+  begin
+    if(rising_edge(clka)) then
+      if(tb_rst='1') then
+        count <= 0;
+      elsif(incr_wr_cnt='1') then
+        count<=count+1;
+      end if;
+      if(count=(WR_DEEP_COUNT)) then
+        count<=0;
+      end if;
+   end if;
+  end process;
+  
+  DO_WRITE<='1' when (count <WR_DEEP_COUNT and incr_wr_cnt='1') else '0';
+  
+  
+  BEGIN_SHIFT_REG: FOR I IN 0 TO 5 GENERATE
+  BEGIN
+    DFF_RIGHT: IF I=0 GENERATE
+    BEGIN
+      SHIFT_INST_0: ENTITY work.REGISTER_LOGIC
+        PORT MAP(
+           Q    => DO_READ_REG(0),
+           CLK  => CLKB,
+           RST  => TB_RST,
+           D    => DO_READ
+        );
+     END GENERATE DFF_RIGHT;
+
+    DFF_OTHERS: IF ((I>0) AND (I<=5)) GENERATE
+    BEGIN
+      SHIFT_INST: ENTITY work.REGISTER_LOGIC
+        PORT MAP(
+           Q   => DO_READ_REG(I),
+           CLK =>CLKB,
+           RST =>TB_RST,
+           D   =>DO_READ_REG(I-1)
+        );
+    END GENERATE DFF_OTHERS;
+ END GENERATE BEGIN_SHIFT_REG;
+  
+ REGCE_PROCESS: PROCESS(CLKB) 
+   BEGIN
+     IF(RISING_EDGE(CLKB)) THEN
+       IF(TB_RST='1') THEN
+ 	     DO_READ_R <= '0';
+       ELSE
+ 	     DO_READ_R <= DO_READ;
+       END IF;
+     END IF;
+ END PROCESS;
+
+ 
+ 
+   WEA(0) <= DO_WRITE ;
+ 
+
+END ARCHITECTURE;
+
+
+
+
+

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/result_bram/simulation/bmg_tb_pkg.vhd

@@ -0,0 +1,200 @@
+
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7_3 Core - Testbench Package 
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006_3010 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+
+--------------------------------------------------------------------------------
+--
+-- Filename: bmg_tb_pkg.vhd
+--
+-- Description:
+--   BMG Testbench Package files
+--
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: Sep 12, 2011 - First Release
+--------------------------------------------------------------------------------
+--
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+
+PACKAGE BMG_TB_PKG IS
+
+ FUNCTION DIVROUNDUP (
+    DATA_VALUE : INTEGER;
+    DIVISOR : INTEGER)
+ RETURN INTEGER;
+ ------------------------
+ FUNCTION IF_THEN_ELSE (
+    CONDITION : BOOLEAN;
+    TRUE_CASE : STD_LOGIC_VECTOR;
+    FALSE_CASE : STD_LOGIC_VECTOR)
+  RETURN STD_LOGIC_VECTOR;
+ ------------------------ 
+ FUNCTION IF_THEN_ELSE (
+   CONDITION : BOOLEAN;
+   TRUE_CASE : STRING;
+   FALSE_CASE :STRING)
+ RETURN STRING;
+ ------------------------ 
+ FUNCTION IF_THEN_ELSE (
+   CONDITION : BOOLEAN;
+   TRUE_CASE : STD_LOGIC;
+   FALSE_CASE :STD_LOGIC)
+ RETURN STD_LOGIC;
+ ------------------------ 
+ FUNCTION IF_THEN_ELSE (
+   CONDITION : BOOLEAN;
+   TRUE_CASE : INTEGER;
+   FALSE_CASE : INTEGER)
+ RETURN INTEGER;
+ ------------------------ 
+ FUNCTION LOG2ROUNDUP (
+      DATA_VALUE : INTEGER)
+ RETURN INTEGER; 
+
+END BMG_TB_PKG;
+
+PACKAGE BODY BMG_TB_PKG IS
+
+ FUNCTION DIVROUNDUP (
+    DATA_VALUE : INTEGER;
+    DIVISOR : INTEGER)
+  RETURN INTEGER IS
+    VARIABLE DIV                   : INTEGER;
+  BEGIN
+    DIV   := DATA_VALUE/DIVISOR;
+    IF ( (DATA_VALUE MOD DIVISOR) /= 0) THEN
+      DIV := DIV+1;
+    END IF;
+    RETURN DIV;
+  END DIVROUNDUP;
+  ---------------------------------
+    FUNCTION IF_THEN_ELSE (
+    CONDITION : BOOLEAN;
+    TRUE_CASE : STD_LOGIC_VECTOR;
+    FALSE_CASE : STD_LOGIC_VECTOR)
+    RETURN STD_LOGIC_VECTOR IS
+    BEGIN
+       IF NOT CONDITION THEN
+          RETURN FALSE_CASE;
+       ELSE
+          RETURN TRUE_CASE;
+      END IF;
+   END IF_THEN_ELSE;
+  ---------------------------------
+    FUNCTION IF_THEN_ELSE (
+    CONDITION : BOOLEAN;
+    TRUE_CASE : STD_LOGIC;
+    FALSE_CASE : STD_LOGIC)
+    RETURN STD_LOGIC IS
+    BEGIN
+       IF NOT CONDITION THEN
+          RETURN FALSE_CASE;
+       ELSE
+          RETURN TRUE_CASE;
+      END IF;
+   END IF_THEN_ELSE;
+  ---------------------------------
+  FUNCTION IF_THEN_ELSE (
+    CONDITION : BOOLEAN;
+    TRUE_CASE : INTEGER;
+    FALSE_CASE : INTEGER)
+  RETURN INTEGER IS
+    VARIABLE RETVAL : INTEGER := 0;
+  BEGIN
+    IF CONDITION=FALSE THEN
+      RETVAL:=FALSE_CASE;
+    ELSE
+      RETVAL:=TRUE_CASE;
+    END IF;
+    RETURN RETVAL;
+  END IF_THEN_ELSE;
+  ---------------------------------
+  FUNCTION IF_THEN_ELSE (
+    CONDITION : BOOLEAN;
+    TRUE_CASE : STRING;
+    FALSE_CASE : STRING)
+  RETURN STRING IS
+    BEGIN
+     IF NOT CONDITION THEN
+        RETURN FALSE_CASE;
+     ELSE
+        RETURN TRUE_CASE;
+     END IF;
+ END IF_THEN_ELSE;
+  ------------------------------- 
+  FUNCTION LOG2ROUNDUP (
+      DATA_VALUE : INTEGER)
+    RETURN INTEGER IS
+      VARIABLE WIDTH       : INTEGER := 0;
+      VARIABLE CNT         : INTEGER := 1;
+    BEGIN
+      IF (DATA_VALUE <= 1) THEN
+        WIDTH   := 1;
+      ELSE
+        WHILE (CNT < DATA_VALUE) LOOP
+          WIDTH := WIDTH + 1;
+          CNT   := CNT *2;
+        END LOOP;
+      END IF;
+      RETURN WIDTH;
+    END LOG2ROUNDUP;
+
+END BMG_TB_PKG;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/result_bram/simulation/checker.vhd

@@ -0,0 +1,161 @@
+
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7_3 Core - Checker
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006_3010 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+
+--------------------------------------------------------------------------------
+--
+-- Filename: checker.vhd
+--
+-- Description:
+--   Checker
+--
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: Sep 12, 2011 - First Release
+--------------------------------------------------------------------------------
+--
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+
+LIBRARY work;
+USE work.BMG_TB_PKG.ALL;
+
+ENTITY CHECKER IS
+  GENERIC ( WRITE_WIDTH : INTEGER :=32;
+            READ_WIDTH  : INTEGER :=32
+  );
+        
+  PORT (
+        CLK      : IN STD_LOGIC;
+        RST      : IN STD_LOGIC;
+        EN       : IN STD_LOGIC; 
+        DATA_IN  : IN STD_LOGIC_VECTOR (READ_WIDTH-1 DOWNTO 0);   --OUTPUT VECTOR          
+        STATUS   : OUT STD_LOGIC:= '0'
+  );
+END CHECKER;
+
+ARCHITECTURE CHECKER_ARCH OF CHECKER IS
+  SIGNAL EXPECTED_DATA : STD_LOGIC_VECTOR(READ_WIDTH-1 DOWNTO 0);
+  SIGNAL DATA_IN_R: STD_LOGIC_VECTOR(READ_WIDTH-1 DOWNTO 0);
+  SIGNAL EN_R : STD_LOGIC := '0';
+  SIGNAL EN_2R : STD_LOGIC := '0';
+--DATA PART CNT DEFINES THE ASPECT RATIO AND GIVES THE INFO TO THE DATA GENERATOR TO PROVIDE THE DATA EITHER IN PARTS OR COMPLETE DATA IN ONE SHOT
+--IF READ_WIDTH > WRITE_WIDTH DIVROUNDUP RESULTS IN '1' AND DATA GENERATOR GIVES THE DATAOUT EQUALS TO MAX OF (WRITE_WIDTH, READ_WIDTH)
+--IF READ_WIDTH < WRITE-WIDTH DIVROUNDUP RESULTS IN > '1' AND DATA GENERATOR GIVES THE DATAOUT IN TERMS OF PARTS(EG 4 PARTS WHEN WRITE_WIDTH 32 AND READ WIDTH 8)
+  CONSTANT DATA_PART_CNT: INTEGER:= DIVROUNDUP(WRITE_WIDTH,READ_WIDTH);
+  CONSTANT MAX_WIDTH: INTEGER:= IF_THEN_ELSE((WRITE_WIDTH>READ_WIDTH),WRITE_WIDTH,READ_WIDTH);
+  SIGNAL ERR_HOLD : STD_LOGIC :='0';
+  SIGNAL ERR_DET : STD_LOGIC :='0';
+BEGIN
+   PROCESS(CLK)
+   BEGIN
+     IF(RISING_EDGE(CLK)) THEN
+       IF(RST= '1') THEN
+     	  EN_R <= '0';
+     	  EN_2R <= '0';
+          DATA_IN_R <= (OTHERS=>'0');
+       ELSE
+	      EN_R <= EN;
+	      EN_2R <= EN_R;
+          DATA_IN_R <= DATA_IN;
+       END IF;        
+     END IF;
+   END PROCESS;
+
+   EXPECTED_DATA_GEN_INST:ENTITY work.DATA_GEN 
+      GENERIC MAP ( DATA_GEN_WIDTH =>MAX_WIDTH,
+                    DOUT_WIDTH     => READ_WIDTH,
+         		    DATA_PART_CNT  => DATA_PART_CNT,
+	                SEED           => 2
+      )
+      PORT MAP (
+            CLK      => CLK,
+			RST      => RST,
+            EN       => EN_2R,
+            DATA_OUT => EXPECTED_DATA
+	  );
+
+   PROCESS(CLK)
+   BEGIN
+      IF(RISING_EDGE(CLK)) THEN
+         IF(EN_2R='1') THEN
+        	 IF(EXPECTED_DATA = DATA_IN_R) THEN
+	            ERR_DET<='0';
+        	 ELSE
+	            ERR_DET<= '1';
+        	 END IF;
+         END IF;
+     END IF;
+   END PROCESS;
+
+   PROCESS(CLK,RST)
+   BEGIN
+	  IF(RST='1') THEN
+		 ERR_HOLD <= '0';
+      ELSIF(RISING_EDGE(CLK)) THEN
+         ERR_HOLD <= ERR_HOLD  OR ERR_DET ;
+      END IF;
+   END PROCESS;
+
+   STATUS <= ERR_HOLD;
+
+END ARCHITECTURE;
+
+
+

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/result_bram/simulation/data_gen.vhd

@@ -0,0 +1,140 @@
+
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7_3 Core - Data Generator
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006_3010 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+
+--------------------------------------------------------------------------------
+--
+-- Filename: data_gen.vhd
+--
+-- Description:
+--   Data Generator
+--
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: Sep 12, 2011 - First Release
+--------------------------------------------------------------------------------
+--
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+
+LIBRARY work;
+USE work.BMG_TB_PKG.ALL;
+
+ENTITY DATA_GEN IS
+  GENERIC ( DATA_GEN_WIDTH : INTEGER := 32;
+            DOUT_WIDTH     : INTEGER := 32;
+            DATA_PART_CNT  : INTEGER := 1;
+            SEED           : INTEGER := 2
+  );
+        
+  PORT (
+        CLK      : IN STD_LOGIC;
+        RST      : IN STD_LOGIC;
+        EN       : IN STD_LOGIC; 
+        DATA_OUT : OUT STD_LOGIC_VECTOR (DOUT_WIDTH-1 DOWNTO 0)   --OUTPUT VECTOR           
+  );
+END DATA_GEN;
+
+ARCHITECTURE DATA_GEN_ARCH OF DATA_GEN IS
+  CONSTANT LOOP_COUNT     : INTEGER   := DIVROUNDUP(DATA_GEN_WIDTH,8);
+  SIGNAL   RAND_DATA      : STD_LOGIC_VECTOR(8*LOOP_COUNT-1 DOWNTO 0);
+  SIGNAL   LOCAL_DATA_OUT : STD_LOGIC_VECTOR(DATA_GEN_WIDTH-1 DOWNTO 0);
+  SIGNAL   LOCAL_CNT      : INTEGER   :=1;
+  SIGNAL   DATA_GEN_I     : STD_LOGIC :='0';
+BEGIN
+
+  LOCAL_DATA_OUT <= RAND_DATA(DATA_GEN_WIDTH-1 DOWNTO 0);
+  DATA_OUT       <= LOCAL_DATA_OUT(((DOUT_WIDTH*LOCAL_CNT)-1) DOWNTO ((DOUT_WIDTH*LOCAL_CNT)-DOUT_WIDTH));
+  DATA_GEN_I     <= '0' WHEN (LOCAL_CNT < DATA_PART_CNT) ELSE EN;
+
+  PROCESS(CLK)
+  BEGIN
+     IF(RISING_EDGE (CLK)) THEN
+        IF(EN ='1' AND (DATA_PART_CNT =1)) THEN
+           LOCAL_CNT <=1;
+        ELSIF(EN='1' AND (DATA_PART_CNT>1)) THEN
+           IF(LOCAL_CNT = 1) THEN
+              LOCAL_CNT <= LOCAL_CNT+1;
+           ELSIF(LOCAL_CNT < DATA_PART_CNT) THEN
+              LOCAL_CNT <= LOCAL_CNT+1;
+           ELSE
+              LOCAL_CNT <= 1;
+           END IF;
+        ELSE
+          LOCAL_CNT <= 1;
+        END IF;
+     END IF;
+  END PROCESS;
+
+  RAND_GEN:FOR N IN LOOP_COUNT-1 DOWNTO 0 GENERATE
+    RAND_GEN_INST:ENTITY work.RANDOM
+       GENERIC MAP(
+           WIDTH => 8,
+           SEED => (SEED+N) 
+       )
+       PORT MAP(
+          CLK => CLK,
+	      RST => RST,
+          EN  => DATA_GEN_I,
+          RANDOM_NUM => RAND_DATA(8*(N+1)-1 DOWNTO 8*N)
+       );
+  END GENERATE RAND_GEN;
+
+END ARCHITECTURE;
+

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/result_bram/simulation/random.vhd

@@ -0,0 +1,112 @@
+
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7_3 Core - Random Number Generator
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006_3010 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+
+--------------------------------------------------------------------------------
+--
+-- Filename: random.vhd
+--
+-- Description:
+--   Random Generator
+--
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: Sep 12, 2011 - First Release
+--------------------------------------------------------------------------------
+--
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+
+
+
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+
+
+ENTITY RANDOM IS
+  GENERIC ( WIDTH : INTEGER :=  32;
+ 	        SEED  : INTEGER :=2 
+  );
+        
+  PORT (
+     CLK        : IN STD_LOGIC;
+     RST        : IN STD_LOGIC;
+     EN         : IN STD_LOGIC;
+     RANDOM_NUM : OUT STD_LOGIC_VECTOR (WIDTH-1 DOWNTO 0)   --OUTPUT VECTOR           
+  );
+END RANDOM;
+
+ARCHITECTURE BEHAVIORAL OF RANDOM IS
+BEGIN
+  PROCESS(CLK)
+    VARIABLE RAND_TEMP : STD_LOGIC_VECTOR(WIDTH-1 DOWNTO 0):=CONV_STD_LOGIC_VECTOR(SEED,WIDTH);
+    VARIABLE TEMP      : STD_LOGIC := '0';
+  BEGIN
+    IF(RISING_EDGE(CLK)) THEN
+       IF(RST='1') THEN
+          RAND_TEMP  := CONV_STD_LOGIC_VECTOR(SEED,WIDTH);
+	   ELSE
+          IF(EN = '1') THEN
+             TEMP                        := RAND_TEMP(WIDTH-1) XOR RAND_TEMP(WIDTH-2);
+             RAND_TEMP(WIDTH-1 DOWNTO 1) := RAND_TEMP(WIDTH-2 DOWNTO 0);
+             RAND_TEMP(0)                := TEMP;
+          END IF;
+       END IF;
+    END IF;
+    RANDOM_NUM <= RAND_TEMP;
+  END PROCESS;
+END ARCHITECTURE;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/result_bram/simulation/result_bram_synth.vhd

@@ -0,0 +1,322 @@
+ 
+ 
+ 
+
+
+
+
+
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7_3 Core - Synthesizable Testbench
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006_3010 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+
+--------------------------------------------------------------------------------
+--
+-- Filename: result_bram_synth.vhd
+--
+-- Description:
+--  Synthesizable Testbench
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: Sep 12, 2011 - First Release
+--------------------------------------------------------------------------------
+--
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.NUMERIC_STD.ALL;
+USE IEEE.STD_LOGIC_MISC.ALL;
+
+LIBRARY STD;
+USE STD.TEXTIO.ALL;
+
+--LIBRARY unisim;
+--USE unisim.vcomponents.ALL;
+
+LIBRARY work;
+USE work.ALL;
+USE work.BMG_TB_PKG.ALL;
+
+ENTITY result_bram_synth IS
+PORT(
+	CLK_IN     : IN  STD_LOGIC;
+	CLKB_IN     : IN  STD_LOGIC;
+    RESET_IN   : IN  STD_LOGIC;
+    STATUS     : OUT STD_LOGIC_VECTOR(8 DOWNTO 0) := (OTHERS => '0')   --ERROR STATUS OUT OF FPGA
+    );
+END ENTITY;
+
+ARCHITECTURE result_bram_synth_ARCH OF result_bram_synth IS
+
+
+COMPONENT result_bram_exdes 
+  PORT (
+      --Inputs - Port A
+    WEA            : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    ADDRA          : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    DINA           : IN STD_LOGIC_VECTOR(191 DOWNTO 0);
+    CLKA       : IN STD_LOGIC;
+
+      --Inputs - Port B
+    ADDRB          : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    DOUTB          : OUT STD_LOGIC_VECTOR(191 DOWNTO 0);
+    CLKB           : IN STD_LOGIC
+
+  );
+
+END COMPONENT;
+
+
+  SIGNAL CLKA: STD_LOGIC := '0';
+  SIGNAL RSTA: STD_LOGIC := '0';
+  SIGNAL WEA: STD_LOGIC_VECTOR(0 DOWNTO 0) := (OTHERS => '0');
+  SIGNAL WEA_R: STD_LOGIC_VECTOR(0 DOWNTO 0) := (OTHERS => '0');
+  SIGNAL ADDRA: STD_LOGIC_VECTOR(7 DOWNTO 0) := (OTHERS => '0');
+  SIGNAL ADDRA_R: STD_LOGIC_VECTOR(7 DOWNTO 0) := (OTHERS => '0');
+  SIGNAL DINA: STD_LOGIC_VECTOR(191 DOWNTO 0) := (OTHERS => '0');
+  SIGNAL DINA_R: STD_LOGIC_VECTOR(191 DOWNTO 0) := (OTHERS => '0');
+  SIGNAL CLKB: STD_LOGIC := '0';
+  SIGNAL RSTB: STD_LOGIC := '0';
+  SIGNAL ADDRB: STD_LOGIC_VECTOR(7 DOWNTO 0) := (OTHERS => '0');
+  SIGNAL ADDRB_R: STD_LOGIC_VECTOR(7 DOWNTO 0) := (OTHERS => '0');
+  SIGNAL DOUTB: STD_LOGIC_VECTOR(191 DOWNTO 0);
+  SIGNAL CHECKER_EN : STD_LOGIC:='0';
+  SIGNAL CHECKER_EN_R : STD_LOGIC:='0';
+  SIGNAL STIMULUS_FLOW : STD_LOGIC_VECTOR(22 DOWNTO 0) := (OTHERS =>'0');
+  SIGNAL clk_in_i: STD_LOGIC;
+ 
+  SIGNAL RESET_SYNC_R1 : STD_LOGIC:='1';
+  SIGNAL RESET_SYNC_R2 : STD_LOGIC:='1';
+  SIGNAL RESET_SYNC_R3 : STD_LOGIC:='1';
+
+  SIGNAL clkb_in_i: STD_LOGIC;
+  SIGNAL RESETB_SYNC_R1 : STD_LOGIC := '1';
+  SIGNAL RESETB_SYNC_R2 : STD_LOGIC := '1';
+  SIGNAL RESETB_SYNC_R3 : STD_LOGIC := '1';
+  SIGNAL ITER_R0 : STD_LOGIC := '0';
+  SIGNAL ITER_R1 : STD_LOGIC := '0';
+  SIGNAL ITER_R2 : STD_LOGIC := '0';
+
+  SIGNAL ISSUE_FLAG : STD_LOGIC_VECTOR(7 DOWNTO 0) := (OTHERS => '0');
+  SIGNAL ISSUE_FLAG_STATUS : STD_LOGIC_VECTOR(7 DOWNTO 0) := (OTHERS => '0');
+
+  BEGIN
+
+--  clk_buf: bufg
+--    PORT map(
+--      i => CLK_IN,
+--      o => clk_in_i
+--    );
+   clk_in_i <= CLK_IN;
+   CLKA <= clk_in_i;
+
+--  clkb_buf: bufg
+--    PORT map(
+--      i => CLKB_IN,
+--      o => clkb_in_i
+--    );
+   clkb_in_i <= CLKB_IN;
+   CLKB <= clkb_in_i;
+   RSTA <= RESET_SYNC_R3 AFTER 50 ns;
+
+
+   PROCESS(clk_in_i)
+   BEGIN
+      IF(RISING_EDGE(clk_in_i)) THEN
+		 RESET_SYNC_R1 <= RESET_IN;
+		 RESET_SYNC_R2 <= RESET_SYNC_R1;
+		 RESET_SYNC_R3 <= RESET_SYNC_R2;
+	  END IF;
+   END PROCESS;
+
+   RSTB <= RESETB_SYNC_R3 AFTER 50 ns;
+
+   PROCESS(clkb_in_i)
+   BEGIN
+      IF(RISING_EDGE(clkb_in_i)) THEN
+		 RESETB_SYNC_R1 <= RESET_IN;
+		 RESETB_SYNC_R2 <= RESETB_SYNC_R1;
+		 RESETB_SYNC_R3 <= RESETB_SYNC_R2;
+	  END IF;
+   END PROCESS;
+
+PROCESS(CLKA)
+BEGIN
+  IF(RISING_EDGE(CLKA)) THEN
+    IF(RESET_SYNC_R3='1') THEN
+        ISSUE_FLAG_STATUS<= (OTHERS => '0'); 
+	  ELSE
+        ISSUE_FLAG_STATUS <= ISSUE_FLAG_STATUS OR ISSUE_FLAG;
+   END IF;
+  END IF;
+END PROCESS;
+
+STATUS(7 DOWNTO 0) <= ISSUE_FLAG_STATUS;
+
+
+
+
+   BMG_DATA_CHECKER_INST: ENTITY work.CHECKER
+      GENERIC MAP ( 
+         WRITE_WIDTH => 192,
+		 READ_WIDTH  => 192      )
+      PORT MAP (
+         CLK      => clkb_in_i,
+         RST      => RSTB, 
+         EN       => CHECKER_EN_R,
+         DATA_IN  => DOUTB,
+         STATUS   => ISSUE_FLAG(0)
+	   );
+
+   PROCESS(clkb_in_i)
+   BEGIN
+      IF(RISING_EDGE(clkb_in_i)) THEN
+         IF(RSTB='1') THEN
+		    CHECKER_EN_R <= '0';
+	     ELSE
+		    CHECKER_EN_R <= CHECKER_EN AFTER 50 ns;
+         END IF;
+      END IF;
+   END PROCESS;
+
+
+ BMG_STIM_GEN_INST:ENTITY work.BMG_STIM_GEN
+     PORT MAP(
+       CLKA => clk_in_i,
+       CLKB => clkb_in_i,
+       TB_RST => RSTA,
+       ADDRA  => ADDRA,
+       DINA => DINA,
+       WEA => WEA,
+       ADDRB => ADDRB,
+	   CHECK_DATA => CHECKER_EN
+     );
+  PROCESS(CLKA)
+  BEGIN
+    IF(RISING_EDGE(CLKA)) THEN
+	  IF(RESET_SYNC_R3='1') THEN
+		STATUS(8) <= '0';
+		iter_r2 <= '0';
+		iter_r1 <= '0';
+		iter_r0 <= '0';
+	  ELSE
+		STATUS(8) <= iter_r2;
+		iter_r2 <= iter_r1;
+		iter_r1 <= iter_r0;
+		iter_r0 <= STIMULUS_FLOW(8);
+      END IF;
+    END IF;
+  END PROCESS;
+
+
+  PROCESS(CLKA)
+  BEGIN
+    IF(RISING_EDGE(CLKA)) THEN
+	  IF(RESET_SYNC_R3='1') THEN
+	      STIMULUS_FLOW <= (OTHERS => '0'); 
+       ELSIF(WEA(0)='1') THEN
+	      STIMULUS_FLOW <= STIMULUS_FLOW+1;
+     END IF;
+	    END IF;
+      END PROCESS;
+
+
+
+      PROCESS(CLKA)
+      BEGIN
+        IF(RISING_EDGE(CLKA)) THEN
+		  IF(RESET_SYNC_R3='1') THEN
+            WEA_R  <= (OTHERS=>'0') AFTER 50 ns;
+            DINA_R <= (OTHERS=>'0') AFTER 50 ns;
+          
+
+           ELSE
+            WEA_R  <= WEA AFTER 50 ns;
+            DINA_R <= DINA AFTER 50 ns;
+
+         END IF;
+	    END IF;
+      END PROCESS;
+
+
+      PROCESS(CLKA)
+      BEGIN
+        IF(RISING_EDGE(CLKA)) THEN
+		  IF(RESET_SYNC_R3='1') THEN
+            ADDRA_R <= (OTHERS=> '0') AFTER 50 ns;
+            ADDRB_R <= (OTHERS=> '0') AFTER 50 ns;
+          ELSE
+            ADDRA_R <= ADDRA AFTER 50 ns;
+            ADDRB_R <= ADDRB AFTER 50 ns;
+          END IF;
+	    END IF;
+      END PROCESS;
+
+
+    BMG_PORT: result_bram_exdes PORT MAP ( 
+      --Port A
+      WEA        => WEA_R,
+      ADDRA      => ADDRA_R,
+      DINA       => DINA_R,
+      CLKA       => CLKA,
+      --Port B
+      ADDRB      => ADDRB_R,
+      DOUTB      => DOUTB,
+      CLKB       => CLKB
+
+    );
+END ARCHITECTURE;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/result_bram/simulation/result_bram_tb.vhd

@@ -0,0 +1,142 @@
+--------------------------------------------------------------------------------
+--
+-- BLK MEM GEN v7_3 Core - Top File for the Example Testbench
+--
+--------------------------------------------------------------------------------
+--
+-- (c) Copyright 2006_3010 Xilinx, Inc. All rights reserved.
+--
+-- This file contains confidential and proprietary information
+-- of Xilinx, Inc. and is protected under U.S. and
+-- international copyright and other intellectual property
+-- laws.
+--
+-- DISCLAIMER
+-- This disclaimer is not a license and does not grant any
+-- rights to the materials distributed herewith. Except as
+-- otherwise provided in a valid license issued to you by
+-- Xilinx, and to the maximum extent permitted by applicable
+-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
+-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
+-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
+-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
+-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
+-- (2) Xilinx shall not be liable (whether in contract or tort,
+-- including negligence, or under any other theory of
+-- liability) for any loss or damage of any kind or nature
+-- related to, arising under or in connection with these
+-- materials, including for any direct, or any indirect,
+-- special, incidental, or consequential loss or damage
+-- (including loss of data, profits, goodwill, or any type of
+-- loss or damage suffered as a result of any action brought
+-- by a third party) even if such damage or loss was
+-- reasonably foreseeable or Xilinx had been advised of the
+-- possibility of the same.
+--
+-- CRITICAL APPLICATIONS
+-- Xilinx products are not designed or intended to be fail-
+-- safe, or for use in any application requiring fail-safe
+-- performance, such as life-support or safety devices or
+-- systems, Class III medical devices, nuclear facilities,
+-- applications related to the deployment of airbags, or any
+-- other applications that could lead to death, personal
+-- injury, or severe property or environmental damage
+-- (individually and collectively, "Critical
+-- Applications"). Customer assumes the sole risk and
+-- liability of any use of Xilinx products in Critical
+-- Applications, subject only to applicable laws and
+-- regulations governing limitations on product liability.
+--
+-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
+-- PART OF THIS FILE AT ALL TIMES.
+
+--------------------------------------------------------------------------------
+-- Filename: result_bram_tb.vhd
+-- Description:
+--  Testbench Top
+--------------------------------------------------------------------------------
+-- Author: IP Solutions Division
+--
+-- History: Sep 12, 2011 - First Release
+--------------------------------------------------------------------------------
+--
+--------------------------------------------------------------------------------
+-- Library Declarations
+--------------------------------------------------------------------------------
+
+LIBRARY IEEE;
+USE IEEE.STD_LOGIC_1164.ALL;
+USE IEEE.STD_LOGIC_ARITH.ALL;
+USE IEEE.STD_LOGIC_UNSIGNED.ALL;
+
+LIBRARY work;
+USE work.ALL;
+
+ENTITY result_bram_tb IS
+END ENTITY;
+
+
+ARCHITECTURE result_bram_tb_ARCH OF result_bram_tb IS
+ SIGNAL  STATUS : STD_LOGIC_VECTOR(8 DOWNTO 0);
+ SIGNAL  CLK :  STD_LOGIC := '1';
+ SIGNAL  CLKB :  STD_LOGIC := '1';
+ SIGNAL  RESET : STD_LOGIC;
+ 
+ BEGIN
+
+  
+ CLK_GEN: PROCESS BEGIN
+     CLK <= NOT CLK;
+     WAIT FOR 100 NS;
+     CLK <= NOT CLK; 
+     WAIT FOR 100 NS;
+  END PROCESS;
+ CLKB_GEN: PROCESS BEGIN
+     CLKB <= NOT CLKB;
+     WAIT FOR 100 NS;
+     CLKB <= NOT CLKB; 
+     WAIT FOR 100 NS;
+  END PROCESS;
+  
+  RST_GEN: PROCESS BEGIN
+    RESET <= '1';
+    WAIT FOR 1000 NS;
+    RESET <= '0';
+    WAIT;
+  END PROCESS;
+
+  
+--STOP_SIM: PROCESS BEGIN
+-- WAIT FOR 200 US; -- STOP SIMULATION AFTER 1 MS
+--   ASSERT FALSE
+--     REPORT "END SIMULATION TIME REACHED"
+--     SEVERITY FAILURE;
+--END PROCESS;
+--
+PROCESS BEGIN
+  WAIT UNTIL STATUS(8)='1';
+  IF( STATUS(7 downto 0)/="0") THEN
+    ASSERT false
+     REPORT "Test Completed Successfully"
+	 SEVERITY NOTE;
+     REPORT "Simulation Failed"
+	 SEVERITY FAILURE;
+  ELSE
+   ASSERT false
+     REPORT "TEST PASS"
+     SEVERITY NOTE;
+     REPORT "Test Completed Successfully"
+	 SEVERITY FAILURE;
+  END IF;
+  
+END PROCESS;	 
+  
+  result_bram_synth_inst:ENTITY work.result_bram_synth
+  PORT MAP(
+           CLK_IN   => CLK,
+           CLKB_IN   => CLK,
+     	   RESET_IN => RESET,
+           STATUS   => STATUS
+	  );
+
+END ARCHITECTURE;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/wide_mult.gise

@@ -0,0 +1,53 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<generated_project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
+
+  <!--                                                          -->
+
+  <!--             For tool use only. Do not edit.              -->
+
+  <!--                                                          -->
+
+  <!-- ProjectNavigator created generated project file.         -->
+
+  <!-- For use in tracking generated file and other information -->
+
+  <!-- allowing preservation of process status.                 -->
+
+  <!--                                                          -->
+
+  <!-- Copyright (c) 1995-2013 Xilinx, Inc.  All rights reserved. -->
+
+  <version xmlns="http://www.xilinx.com/XMLSchema">11.1</version>
+
+  <sourceproject xmlns="http://www.xilinx.com/XMLSchema" xil_pn:fileType="FILE_XISE" xil_pn:name="wide_mult.xise"/>
+
+  <files xmlns="http://www.xilinx.com/XMLSchema">
+    <file xil_pn:fileType="FILE_ASY" xil_pn:name="wide_mult.asy" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_SYMBOL" xil_pn:name="wide_mult.sym" xil_pn:origination="imported"/>
+    <file xil_pn:fileType="FILE_VHO" xil_pn:name="wide_mult.vho" xil_pn:origination="imported"/>
+  </files>
+
+  <transforms xmlns="http://www.xilinx.com/XMLSchema">
+    <transform xil_pn:end_ts="1654646662" xil_pn:name="TRAN_copyInitialToXSTAbstractSynthesis" xil_pn:start_ts="1654646662">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_schematicsToHdl" xil_pn:prop_ck="4659816854749047906" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_regenerateCores" xil_pn:prop_ck="-5812453015497774159" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_SubProjectAbstractToPreProxy" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+    <transform xil_pn:end_ts="1654895235" xil_pn:name="TRAN_xawsTohdl" xil_pn:prop_ck="7916142474556992292" xil_pn:start_ts="1654895235">
+      <status xil_pn:value="SuccessfullyRun"/>
+      <status xil_pn:value="ReadyToRun"/>
+    </transform>
+  </transforms>
+
+</generated_project>

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/Generator/ipcore_dir/wide_mult.vhd

@@ -0,0 +1,102 @@
+--------------------------------------------------------------------------------
+--    This file is owned and controlled by Xilinx and must be used solely     --
+--    for design, simulation, implementation and creation of design files     --
+--    limited to Xilinx devices or technologies. Use with non-Xilinx          --
+--    devices or technologies is expressly prohibited and immediately         --
+--    terminates your license.                                                --
+--                                                                            --
+--    XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" SOLELY    --
+--    FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR XILINX DEVICES.  BY    --
+--    PROVIDING THIS DESIGN, CODE, OR INFORMATION AS ONE POSSIBLE             --
+--    IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, XILINX IS      --
+--    MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE FROM ANY      --
+--    CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING ANY       --
+--    RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY       --
+--    DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE   --
+--    IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR          --
+--    REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF         --
+--    INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A   --
+--    PARTICULAR PURPOSE.                                                     --
+--                                                                            --
+--    Xilinx products are not intended for use in life support appliances,    --
+--    devices, or systems.  Use in such applications are expressly            --
+--    prohibited.                                                             --
+--                                                                            --
+--    (c) Copyright 1995-2022 Xilinx, Inc.                                    --
+--    All rights reserved.                                                    --
+--------------------------------------------------------------------------------
+--------------------------------------------------------------------------------
+-- You must compile the wrapper file wide_mult.vhd when simulating
+-- the core, wide_mult. When compiling the wrapper file, be sure to
+-- reference the XilinxCoreLib VHDL simulation library. For detailed
+-- instructions, please refer to the "CORE Generator Help".
+
+-- The synthesis directives "translate_off/translate_on" specified
+-- below are supported by Xilinx, Mentor Graphics and Synplicity
+-- synthesis tools. Ensure they are correct for your synthesis tool(s).
+
+LIBRARY ieee;
+USE ieee.std_logic_1164.ALL;
+-- synthesis translate_off
+LIBRARY XilinxCoreLib;
+-- synthesis translate_on
+ENTITY wide_mult IS
+  PORT (
+    clk : IN STD_LOGIC;
+    a : IN STD_LOGIC_VECTOR(12 DOWNTO 0);
+    b : IN STD_LOGIC_VECTOR(26 DOWNTO 0);
+    ce : IN STD_LOGIC;
+    p : OUT STD_LOGIC_VECTOR(39 DOWNTO 0)
+  );
+END wide_mult;
+
+ARCHITECTURE wide_mult_a OF wide_mult IS
+-- synthesis translate_off
+COMPONENT wrapped_wide_mult
+  PORT (
+    clk : IN STD_LOGIC;
+    a : IN STD_LOGIC_VECTOR(12 DOWNTO 0);
+    b : IN STD_LOGIC_VECTOR(26 DOWNTO 0);
+    ce : IN STD_LOGIC;
+    p : OUT STD_LOGIC_VECTOR(39 DOWNTO 0)
+  );
+END COMPONENT;
+
+-- Configuration specification
+  FOR ALL : wrapped_wide_mult USE ENTITY XilinxCoreLib.mult_gen_v11_2(behavioral)
+    GENERIC MAP (
+      c_a_type => 1,
+      c_a_width => 13,
+      c_b_type => 1,
+      c_b_value => "10000001",
+      c_b_width => 27,
+      c_ccm_imp => 0,
+      c_ce_overrides_sclr => 0,
+      c_has_ce => 1,
+      c_has_sclr => 0,
+      c_has_zero_detect => 0,
+      c_latency => 5,
+      c_model_type => 0,
+      c_mult_type => 1,
+      c_optimize_goal => 1,
+      c_out_high => 39,
+      c_out_low => 0,
+      c_round_output => 0,
+      c_round_pt => 0,
+      c_verbosity => 0,
+      c_xdevicefamily => "spartan6"
+    );
+-- synthesis translate_on
+BEGIN
+-- synthesis translate_off
+U0 : wrapped_wide_mult
+  PORT MAP (
+    clk => clk,
+    a => a,
+    b => b,
+    ce => ce,
+    p => p
+  );
+-- synthesis translate_on
+
+END wide_mult_a;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/VNA/BuildConfig.vhd

@@ -0,0 +1,6 @@
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+package BuildConfig is
+	constant EXTERNAL_MASTER_LO_SLAVE : boolean := false;
+end package BuildConfig;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/VNA/BuildConfig_external_lo_slave.vhd

@@ -0,0 +1,6 @@
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+package BuildConfig is
+	constant EXTERNAL_MASTER_LO_SLAVE : boolean := true;
+end package BuildConfig;

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/VNA/DFT.vhd

@@ -0,0 +1,358 @@
+----------------------------------------------------------------------------------
+-- Company: 
+-- Engineer: 
+-- 
+-- Create Date:    20:38:37 09/18/2020 
+-- Design Name: 
+-- Module Name:    DFT - Behavioral 
+-- Project Name: 
+-- Target Devices: 
+-- Tool versions: 
+-- Description: 
+--
+-- Dependencies: 
+--
+-- Revision: 
+-- Revision 0.01 - File Created
+-- Additional Comments: 
+--
+----------------------------------------------------------------------------------
+library IEEE;
+use IEEE.STD_LOGIC_1164.ALL;
+
+-- Uncomment the following library declaration if using
+-- arithmetic functions with Signed or Unsigned values
+use IEEE.NUMERIC_STD.ALL;
+
+-- Uncomment the following library declaration if instantiating
+-- any Xilinx primitives in this code.
+--library UNISIM;
+--use UNISIM.VComponents.all;
+
+entity DFT is
+	Generic (BINS : integer);
+    Port ( CLK : in  STD_LOGIC;
+           RESET : in  STD_LOGIC;
+           PORT1 : in  STD_LOGIC_VECTOR (17 downto 0);
+           PORT2 : in  STD_LOGIC_VECTOR (17 downto 0);
+           NEW_SAMPLE : in  STD_LOGIC;
+			  NSAMPLES : in STD_LOGIC_VECTOR (12 downto 0);
+           BIN1_PHASEINC : in  STD_LOGIC_VECTOR (15 downto 0);
+           DIFFBIN_PHASEINC : in  STD_LOGIC_VECTOR (15 downto 0);
+           RESULT_READY : out  STD_LOGIC;
+           OUTPUT : out  STD_LOGIC_VECTOR (191 downto 0);
+           NEXT_OUTPUT : in  STD_LOGIC);
+end DFT;
+
+architecture Behavioral of DFT is
+COMPONENT result_bram
+  PORT (
+    clka : IN STD_LOGIC;
+    wea : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    addra : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    dina : IN STD_LOGIC_VECTOR(191 DOWNTO 0);
+    clkb : IN STD_LOGIC;
+    addrb : IN STD_LOGIC_VECTOR(7 DOWNTO 0);
+    doutb : OUT STD_LOGIC_VECTOR(191 DOWNTO 0)
+  );
+END COMPONENT;
+COMPONENT SinCos
+  PORT (
+    clk : IN STD_LOGIC;
+    phase_in : IN STD_LOGIC_VECTOR(11 DOWNTO 0);
+    cosine : OUT STD_LOGIC_VECTOR(15 DOWNTO 0);
+    sine : OUT STD_LOGIC_VECTOR(15 DOWNTO 0)
+  );
+END COMPONENT;
+COMPONENT DSP_SLICE
+  PORT (
+    clk : IN STD_LOGIC;
+    ce : IN STD_LOGIC;
+    sel : IN STD_LOGIC_VECTOR(0 DOWNTO 0);
+    a : IN STD_LOGIC_VECTOR(17 DOWNTO 0);
+    b : IN STD_LOGIC_VECTOR(17 DOWNTO 0);
+    c : IN STD_LOGIC_VECTOR(47 DOWNTO 0);
+    p : OUT STD_LOGIC_VECTOR(47 DOWNTO 0)
+  );
+END COMPONENT;
+COMPONENT window
+PORT(
+	CLK : IN std_logic;
+	INDEX : IN std_logic_vector(6 downto 0);
+	WINDOW_TYPE : IN std_logic_vector(1 downto 0);          
+	VALUE : OUT std_logic_vector(15 downto 0)
+	);
+END COMPONENT;
+
+	--type result is array(BINS-1 downto 0) of std_logic_vector(47 downto 0);
+	--signal port1_real : result;
+	--signal port1_imag : result;
+	--signal port2_real : result;
+	--signal port2_imag : result;
+	
+	--signal port1_real_read : std_logic_vector(47 downto 0);
+	--signal port1_imag_read : std_logic_vector(47 downto 0);
+	--signal port2_real_read : std_logic_vector(47 downto 0);
+	--signal port2_imag_read : std_logic_vector(47 downto 0);
+	
+	signal sample_cnt : integer range 0 to 131072;
+	signal samples_to_take : integer range 0 to 131072;
+	signal bin_cnt : integer range 0 to BINS+2;
+	
+	signal read_address : integer range 0 to BINS-1;
+	signal write_address : integer range 0 to BINS-1;
+	signal read_address_vector : std_logic_vector(7 downto 0);
+	signal write_address_vector : std_logic_vector(7 downto 0);
+	signal we : std_logic_vector(0 downto 0);
+	signal ram_in : std_logic_vector(191 downto 0);
+	signal ram_out : std_logic_vector(191 downto 0);
+	
+	type States is (WaitingForSample, WaitMult, WaitSinCos, Busy, Ready);
+	signal state : States;
+	signal port1_latch : std_logic_vector(17 downto 0);
+	signal port2_latch : std_logic_vector(17 downto 0);
+	
+	signal phase : std_logic_vector(31 downto 0);
+	signal phase_inc : std_logic_vector(31 downto 0);
+	signal sine : std_logic_vector(15 downto 0);
+	signal cosine : std_logic_vector(15 downto 0);
+	
+	signal mult1_a : std_logic_vector(17 downto 0);
+	signal mult1_b : std_logic_vector(17 downto 0);
+	signal mult1_c : std_logic_vector(47 downto 0);
+	signal mult1_p : std_logic_vector(47 downto 0);
+	
+	signal mult2_a : std_logic_vector(17 downto 0);
+	signal mult2_b : std_logic_vector(17 downto 0);
+	signal mult2_c : std_logic_vector(47 downto 0);
+	signal mult2_p : std_logic_vector(47 downto 0);
+	
+	signal mult3_a : std_logic_vector(17 downto 0);
+	signal mult3_b : std_logic_vector(17 downto 0);
+	signal mult3_c : std_logic_vector(47 downto 0);
+	signal mult3_p : std_logic_vector(47 downto 0);
+	
+	signal mult4_a : std_logic_vector(17 downto 0);
+	signal mult4_b : std_logic_vector(17 downto 0);
+	signal mult4_c : std_logic_vector(47 downto 0);
+	signal mult4_p : std_logic_vector(47 downto 0);
+	
+	signal mult_enable : std_logic;
+	signal mult_accumulate : std_logic_vector(0 downto 0);
+begin
+
+	LookupTable : SinCos
+	PORT MAP (
+		clk => CLK,
+		phase_in => phase(31 downto 20),
+		cosine => cosine,
+		sine => sine
+	);
+	Mult1 : DSP_SLICE
+	PORT MAP (
+		clk => CLK,
+		ce => mult_enable,
+		sel => mult_accumulate,
+		a => mult1_a,
+		b => mult1_b,
+		c => mult1_c,
+		p => mult1_p
+	);
+	Mult2 : DSP_SLICE
+	PORT MAP (
+		clk => CLK,
+		ce => mult_enable,
+		sel => mult_accumulate,
+		a => mult2_a,
+		b => mult2_b,
+		c => mult2_c,
+		p => mult2_p
+	);
+	Mult3 : DSP_SLICE
+	PORT MAP (
+		clk => CLK,
+		ce => mult_enable,
+		sel => mult_accumulate,
+		a => mult3_a,
+		b => mult3_b,
+		c => mult3_c,
+		p => mult3_p
+	);
+	Mult4 : DSP_SLICE
+	PORT MAP (
+		clk => CLK,
+		ce => mult_enable,
+		sel => mult_accumulate,
+		a => mult4_a,
+		b => mult4_b,
+		c => mult4_c,
+		p => mult4_p
+	);
+	
+	result_ram: result_bram
+	PORT MAP (
+		clka => CLK,
+		wea => we,
+		addra => write_address_vector,
+		dina => ram_in,
+		clkb => CLK,
+		addrb => read_address_vector,
+		doutb => ram_out
+	);
+	
+	read_address_vector <= std_logic_vector(to_unsigned(read_address, 8));
+	write_address_vector <= std_logic_vector(to_unsigned(write_address, 8));
+	OUTPUT <= ram_out;
+	
+	mult1_c <= ram_out(191 downto 144);
+	mult2_c <= ram_out(143 downto 96);
+	mult3_c <= ram_out(95 downto 48);
+	mult4_c <= ram_out(47 downto 0);
+	
+	ram_in <= mult1_p & mult2_p & mult3_p & mult4_p;
+	
+	process(CLK, RESET)
+	begin
+		if rising_edge(CLK) then
+			if RESET = '1' then
+				mult_enable <= '0';
+				mult_accumulate <= "0";
+				sample_cnt <= 0;
+				RESULT_READY <= '0';
+				read_address <= 0;
+				write_address <= 0;
+				we <= "0";
+				state <= WaitingForSample;
+			else
+				samples_to_take <= to_integer(unsigned(NSAMPLES & "0000")) - 1;
+				case state is
+					when WaitingForSample =>
+						we <= "0";
+						mult_enable <= '0';
+						mult_accumulate <= "0";
+						read_address <= 0;
+						write_address <= 0;
+						if NEW_SAMPLE = '1' then
+							-- calculate phase for initial bin
+							mult1_a <= std_logic_vector(to_unsigned(sample_cnt, 18));
+							mult1_b <= "00" & BIN1_PHASEINC;
+							mult2_a <= std_logic_vector(to_unsigned(sample_cnt, 18));
+							mult2_b <= "00" & DIFFBIN_PHASEINC;
+							state <= WaitMult;
+							bin_cnt <= 0;
+							mult_enable <= '1';
+						end if;
+					when WaitMult =>
+						RESULT_READY <= '0';
+						we <= "0";
+						mult_enable <= '1';
+						mult_accumulate <= "0";
+						read_address <= 0;
+						write_address <= 0;
+						if bin_cnt < 4 then
+							bin_cnt <= bin_cnt + 1;
+						else
+							bin_cnt <= 0;
+							mult_enable <= '0';
+							state <= WaitSinCos;
+							phase <= mult1_p(15 downto 0) & "0000000000000000";
+							phase_inc <= mult2_p(23 downto 0) & "00000000";
+							port1_latch <= PORT1;
+							port2_latch <= PORT2;
+						end if;
+					when WaitSinCos =>
+						phase <= std_logic_vector(unsigned(phase)+unsigned(phase_inc));
+						RESULT_READY <= '0';
+						we <= "0";
+						mult_enable <= '0';
+						mult_accumulate <= "0";
+						read_address <= 0;
+						write_address <= 0;
+						if bin_cnt < 6 then
+							bin_cnt <= bin_cnt + 1;
+						else
+							bin_cnt <= 0;
+							mult_enable <= '1';
+							read_address <= 1;
+							-- sign extended multiplication
+							mult1_a <= port1_latch;
+							mult1_b <= sine(15) & sine(15) & sine;
+							mult2_a <= port1_latch;
+							mult2_b <= cosine(15) & cosine(15) & cosine;
+							mult3_a <= port2_latch;
+							mult3_b <= sine(15) & sine(15) & sine;
+							mult4_a <= port2_latch;
+							mult4_b <= cosine(15) & cosine(15) & cosine;
+							state <= BUSY;
+							if sample_cnt = 0 then
+								mult_accumulate <= "0";
+							else
+								mult_accumulate <= "1";
+							end if;
+						end if;
+					when BUSY =>
+						mult_enable <= '1';
+						if sample_cnt = 0 then
+							mult_accumulate <= "0";
+						else
+							mult_accumulate <= "1";
+						end if;
+						RESULT_READY <= '0';
+						phase <= std_logic_vector(unsigned(phase)+unsigned(phase_inc));
+						-- sign extended multiplication
+						mult1_a <= port1_latch;
+						mult1_b <= sine(15) & sine(15) & sine;
+						mult2_a <= port1_latch;
+						mult2_b <= cosine(15) & cosine(15) & cosine;
+						mult3_a <= port2_latch;
+						mult3_b <= sine(15) & sine(15) & sine;
+						mult4_a <= port2_latch;
+						mult4_b <= cosine(15) & cosine(15) & cosine;
+						if bin_cnt >= 3 then
+							-- multiplier result is available, advance write address
+							we <= "1";
+							write_address <= bin_cnt - 3;
+						else
+							we <= "0";
+							write_address <= 0;
+						end if;
+						if bin_cnt >= BINS+2 then
+							read_address <= 0;
+							if sample_cnt < samples_to_take then
+								sample_cnt <= sample_cnt + 1;
+								state <= WaitingForSample;
+							else
+								state <= Ready;
+							end if;
+						else
+							bin_cnt <= bin_cnt + 1;
+							if bin_cnt < BINS - 2 then
+								read_address <= bin_cnt + 2;
+							end if;
+						end if;
+					when Ready =>
+						we <= "0";
+						RESULT_READY <= '1';
+						write_address <= 0;
+						if NEXT_OUTPUT = '1' then
+							-- fetch next entry from RAM
+							if read_address < BINS - 1 then
+								read_address <= read_address + 1;
+							else
+								RESULT_READY <= '0';
+								sample_cnt <= 0;
+								mult_enable <= '0';
+								state <= WaitingForSample;
+								read_address <= 0;
+							end if;
+						end if;
+					when others =>
+						state <= WaitingForSample;
+				end case;
+			end if;
+		end if;
+	end process;
+
+
+end Behavioral;
+

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/VNA/Flattop.dat

@@ -0,0 +1,128 @@
+1111111111111000
+1111111111110110
+1111111111110001
+1111111111101001
+1111111111011111
+1111111111010001
+1111111110111111
+1111111110101001
+1111111110001110
+1111111101101110
+1111111101001000
+1111111100011100
+1111111011101001
+1111111010101111
+1111111001101111
+1111111000101000
+1111110111011011
+1111110110001000
+1111110100110001
+1111110011011000
+1111110001111101
+1111110000100011
+1111101111001101
+1111101101111101
+1111101100110111
+1111101011111110
+1111101011010111
+1111101011000100
+1111101011001011
+1111101011110001
+1111101100111001
+1111101110101000
+1111110001000011
+1111110100001110
+1111111000001100
+1111111101000001
+0000000010101110
+0000001001011001
+0000010001000000
+0000011001100100
+0000100011000101
+0000101101100010
+0000111000111000
+0001000101000100
+0001010010000000
+0001011111100111
+0001101101110011
+0001111100011100
+0010001011011001
+0010011010100001
+0010101001101011
+0010111000101100
+0011000111011001
+0011010101101000
+0011100011001110
+0011110000000000
+0011111011110100
+0100000110100001
+0100001111111101
+0100011000000010
+0100011110101000
+0100100011101001
+0100100111000010
+0100101000101111
+0100101000101111
+0100100111000010
+0100100011101001
+0100011110101000
+0100011000000010
+0100001111111101
+0100000110100001
+0011111011110100
+0011110000000000
+0011100011001110
+0011010101101000
+0011000111011001
+0010111000101100
+0010101001101011
+0010011010100001
+0010001011011001
+0001111100011100
+0001101101110011
+0001011111100111
+0001010010000000
+0001000101000100
+0000111000111000
+0000101101100010
+0000100011000101
+0000011001100100
+0000010001000000
+0000001001011001
+0000000010101110
+1111111101000001
+1111111000001100
+1111110100001110
+1111110001000011
+1111101110101000
+1111101100111001
+1111101011110001
+1111101011001011
+1111101011000100
+1111101011010111
+1111101011111110
+1111101100110111
+1111101101111101
+1111101111001101
+1111110000100011
+1111110001111101
+1111110011011000
+1111110100110001
+1111110110001000
+1111110111011011
+1111111000101000
+1111111001101111
+1111111010101111
+1111111011101001
+1111111100011100
+1111111101001000
+1111111101101110
+1111111110001110
+1111111110101001
+1111111110111111
+1111111111010001
+1111111111011111
+1111111111101001
+1111111111110001
+1111111111110110
+1111111111111000

device_firmware/multi_libreVNA_firmware/reproduce/LibreVNA/FPGA/VNA/Hann.dat

@@ -0,0 +1,128 @@
+0000000000000001
+0000000000001011
+0000000000011110
+0000000000111100
+0000000001100011
+0000000010010100
+0000000011001110
+0000000100010010
+0000000101011111
+0000000110110101
+0000001000010100
+0000001001111011
+0000001011101011
+0000001101100010
+0000001111100010
+0000010001101001
+0000010011110111
+0000010110001100
+0000011000101000
+0000011011001001
+0000011101110000
+0000100000011101
+0000100011001110
+0000100110000100
+0000101000111101
+0000101011111011
+0000101110111011
+0000110001111110
+0000110101000011
+0000111000001010
+0000111011010010
+0000111110011011
+0001000001100100
+0001000100101101
+0001000111110101
+0001001010111100
+0001001110000001
+0001010001000100
+0001010100000100
+0001010111000010
+0001011001111011
+0001011100110001
+0001011111100010
+0001100010001111
+0001100100110110
+0001100111010111
+0001101001110011
+0001101100001000
+0001101110010110
+0001110000011101
+0001110010011101
+0001110100010100
+0001110110000100
+0001110111101011
+0001111001001010
+0001111010100000
+0001111011101101
+0001111100110001
+0001111101101011
+0001111110011100
+0001111111000011
+0001111111100001
+0001111111110100
+0001111111111110
+0001111111111110
+0001111111110100
+0001111111100001
+0001111111000011
+0001111110011100
+0001111101101011
+0001111100110001
+0001111011101101
+0001111010100000
+0001111001001010
+0001110111101011
+0001110110000100
+0001110100010100
+0001110010011101
+0001110000011101
+0001101110010110
+0001101100001000
+0001101001110011
+0001100111010111
+0001100100110110
+0001100010001111
+0001011111100010
+0001011100110001
+0001011001111011
+0001010111000010
+0001010100000100
+0001010001000100
+0001001110000001
+0001001010111100
+0001000111110101
+0001000100101101
+0001000001100100
+0000111110011011
+0000111011010010
+0000111000001010
+0000110101000011
+0000110001111110
+0000101110111011
+0000101011111011
+0000101000111101
+0000100110000100
+0000100011001110
+0000100000011101
+0000011101110000
+0000011011001001
+0000011000101000
+0000010110001100
+0000010011110111
+0000010001101001
+0000001111100010
+0000001101100010
+0000001011101011
+0000001001111011
+0000001000010100
+0000000110110101
+0000000101011111
+0000000100010010
+0000000011001110
+0000000010010100
+0000000001100011
+0000000000111100
+0000000000011110
+0000000000001011
+0000000000000001