import time

from datetime import datetime
import device_commands as cmd


#### ---- Constants

WAIT_AFTER_SEND = 0.15 # Wait after sending command, before requesting input (in seconds). 


#### ---- High-level port commands
'''
def create_port_connection():
    prt = None
    for port, _, _ in sorted(cmd.list_ports.comports()):
        try:
            prt = cmd.setup_port_connection(port=port, baudrate=115200, timeout_sec=1)
            cmd.open_port(prt)
            reset_port_settings(prt)
        except:
            prt.close()
            continue
        break
    return prt
'''
def create_port_connection():
    prt = None
    print()
    ports = []
    for port, _,_ in sorted(cmd.list_ports.comports()):
        ports.append(port)

#ONLY FOR LINUX!!!
    have_ttyUSB = False
    USB_ports = []
    for port in ports:
        if "USB" in port:
            USB_ports.append(port)
    if len(USB_ports):
        ports = USB_ports
#    print("ports:", ports)


#    for port, _, _ in sorted(cmd.list_ports.comports()): 
    for port in ports:
        try:
            print("PORT:", port)
            prt = cmd.setup_port_connection(port=port, baudrate=115200, timeout_sec=1)
            cmd.open_port(prt)
            reset_port_settings(prt)
        except:
            prt.close()
            continue
        break
    return prt




# def setup_connection():
#     prt = cmd.setup_port_connection()
#     cmd.open_port(prt)
#     return prt


def reset_port_settings(prt):
    # Reset port settings and check status
    cmd.send_DEFAULT_ENABLE(prt)
    time.sleep(WAIT_AFTER_SEND)
    status = cmd.get_STATE(prt).hex()
    if status is not None:
        print("Received: STATE. State status:", cmd.decode_STATE(status), "("+cmd.flipfour(status)+")")
        print("")


def request_state(prt):
    # Request data
    cmd.send_STATE(prt)
    time.sleep(WAIT_AFTER_SEND)
    status = cmd.get_STATE(prt).hex()
    if status is not None:
        print("Received: STATE. State status:", cmd.decode_STATE(status), "("+cmd.flipfour(status)+")")
        print("")


def send_control_parameters(prt, params):
    # Send control parameters
    hexstring = cmd.encode_Input(params)
    cmd.send_DECODE_ENABLE(prt,hexstring)
    time.sleep(WAIT_AFTER_SEND)
    status = cmd.get_STATE(prt).hex()
    if status is not None:
        print("Received: STATE. State status:", cmd.decode_STATE(status), "("+cmd.flipfour(status)+")")
        print("")
    else:
        print("")

def send_task_command(prt, sending_param):
    # Send task command (TASK_ENABLE state in firmware)
    hexstring = cmd.create_TaskEnableCommand(sending_param)
    cmd.send_TASK_ENABLE(prt,hexstring)
    time.sleep(WAIT_AFTER_SEND)
    status = cmd.get_STATE(prt).hex()
    if status is not None:
        print("Received: STATE. State status:", cmd.decode_STATE(status), "("+cmd.flipfour(status)+")")
        print("")
    else:
        print("")

def request_data(prt):
    # Request data
    cmd.send_TRANS_ENABLE(prt)
    time.sleep(WAIT_AFTER_SEND)
    data = cmd.get_DATA(prt).hex()
    data_dict = []
    if data is not None:
        data_dict = cmd.decode_DATA(data)
    return data_dict


def print_data(data):
    def shorten(i):
        return str(round(i, 2))

    print("Data from device (time: "+datetime.now().strftime("%H:%M:%S:%f")+"):")
    print("Message Header:", data['Header'], "  Message ID:", data['Message_ID'])
    print("Photodiode Current 1 ("+str(len(data['I1']))+" values):", \
        shorten(data['I1']), shorten(data['I1'][1]), "...", \
        shorten(data['I1']), shorten(data['I1'][-1]), "mA")
    print("Photodiode Current 2 ("+str(len(data['I2']))+" values):", \
        shorten(data['I2']), shorten(data['I2'][1]), "...", \
        shorten(data['I2']), shorten(data['I2'][-1]), "mA")
    print("Laser Temperature 1:", shorten(data['Temp_1']), "C")
    print("Laser Temperature 2:", shorten(data['Temp_2']), "C")
    print("Temperature of external thermistor 1:", shorten(data['Temp_Ext_1']), "C")
    print("Temperature of external thermistor 2:", shorten(data['Temp_Ext_2']), "C")
    print("Voltages 3V3: "+shorten(data['MON_3V3'])+"V   5V1: "+shorten(data['MON_5V1'])+ \
        "V   5V2: "+shorten(data['MON_5V2'])+"V   7V0: "+shorten(data['MON_7V0'])+"V.")

def close_connection(prt):
    cmd.close_port(prt)