fix

.gitignore

@@ -1,4 +0,0 @@
-*.venv
-*.pyc
-__pycache__/
-.env

_device_main.py

@@ -44,6 +44,31 @@ def get_float(values, strId):
         window['-StartCycle-'].update(disabled = True)
     return value
 
+def parse_optional_int(value):
+    if value is None:
+        return None
+    s = str(value).strip()
+    if s == "":
+        return None
+    try:
+        return int(s, 0)
+    except Exception:
+        print(f"Invalid integer value: {s}")
+        return None
+
+def parse_optional_float(value):
+    if value is None:
+        return None
+    s = str(value).strip()
+    if s == "":
+        return None
+    s = s.replace(",", ".")
+    try:
+        return float(s)
+    except Exception:
+        print(f"Invalid float value: {s}")
+        return None
+
 def shorten(i):
     return "{:.2f}".format(round(i, 2))
 
@@ -73,6 +98,19 @@ def set_initial_params():
     params['Delta_Current_2'] = 0.05
     params['Delta_Time'] = 50
     params['Tau'] = 10
+    params['RampFreq'] = ''
+    params['RampDuty'] = ''
+    params['RampSawStep'] = ''
+    params['RampPatPeriod'] = ''
+    params['RampPatBase'] = 2
+    params['RampDacClk'] = ''
+    params['RampTriangle'] = True
+    params['RampSramMode'] = False
+    params['RampSramSamples'] = ''
+    params['RampSramAmp'] = ''
+    params['Ad9833Freq'] = ''
+    params['Ad9833Mclk'] = '25'
+    params['Ad9833Triangle'] = True
     return params
 
 def update_data_lists():
@@ -423,6 +461,46 @@ if __name__ == "__main__":
                 params['Iset_2'] = float(values['-InputI2-'])
                 dev.send_control_parameters(prt, params)
             #print(sending_param)
+        elif event == '-StartRamp-':
+            freq_hz = parse_optional_float(values.get('-RampFreq-'))
+            duty = parse_optional_float(values.get('-RampDuty-'))
+            if duty is not None:
+                if duty > 1.0:
+                    duty = duty / 100.0
+                if duty <= 0:
+                    duty = None
+            saw_step = parse_optional_int(values.get('-RampSawStep-'))
+            pat_period = parse_optional_int(values.get('-RampPatPeriod-'))
+            pat_period_base = parse_optional_int(values.get('-RampPatBase-'))
+            dac_clk_mhz = parse_optional_float(values.get('-RampDacClk-'))
+            dac_clk_hz = dac_clk_mhz * 1e6 if dac_clk_mhz is not None else None
+            triangle = values.get('-RampTriangle-', True)
+            sram_mode = values.get('-RampSramMode-', False)
+            sram_samples = parse_optional_int(values.get('-RampSramSamples-'))
+            sram_amp_val = parse_optional_float(values.get('-RampSramAmp-'))
+            sram_amplitude = None
+            if sram_amp_val is not None:
+                if sram_amp_val <= 1.0:
+                    sram_amplitude = int(round(sram_amp_val * 8191.0))
+                elif sram_amp_val <= 100.0:
+                    sram_amplitude = int(round((sram_amp_val / 100.0) * 8191.0))
+                else:
+                    sram_amplitude = int(round(sram_amp_val))
+            dev.start_ramp_max(prt, freq_hz=freq_hz, duty=duty, saw_step=saw_step,
+                               pat_period=pat_period, pat_period_base=pat_period_base,
+                               dac_clk_hz=dac_clk_hz, triangle=triangle,
+                               sram_mode=sram_mode, sram_samples=sram_samples,
+                               sram_amplitude=sram_amplitude)
+        elif event == '-StartRamp9833-':
+            freq_hz = parse_optional_float(values.get('-AD9833Freq-'))
+            mclk_mhz = parse_optional_float(values.get('-AD9833Mclk-'))
+            mclk_hz = mclk_mhz * 1e6 if mclk_mhz is not None else None
+            triangle = values.get('-AD9833Triangle-', True)
+            dev.start_ad9833_ramp(prt, freq_hz=freq_hz, mclk_hz=mclk_hz, triangle=triangle, enable=True)
+        elif event == '-DS1809UC-':
+            dev.send_ds1809_pulse(prt, uc=True, dc=False)
+        elif event == '-DS1809DC-':
+            dev.send_ds1809_pulse(prt, uc=False, dc=True)
         elif event == '-StopCycle-':
             window['-StopCycle-'].update(disabled = True)
             current_and_temperature_settings_available = True
@@ -434,8 +512,8 @@ if __name__ == "__main__":
     
             window['-TOUT_1-'].update(gui.READ_TEMPERATURE_TEXT+' 1: '+shorten(data['Temp_1'])+' C')
             window['-TOUT_2-'].update(gui.READ_TEMPERATURE_TEXT+' 2: '+shorten(data['Temp_2'])+' C')
-            window['-IOUT_1-'].update(gui.READ_CURRENT_TEXT+' 1: '+shorten(data['I1'])+' мА')
+            window['-IOUT_1-'].update(gui.READ_CURRENT_TEXT+' 1: '+shorten(data['I1'])+' мА (raw '+str(data.get('I1_raw', ''))+')')
-            window['-IOUT_2-'].update(gui.READ_CURRENT_TEXT+' 2: '+shorten(data['I2'])+' мА')
+            window['-IOUT_2-'].update(gui.READ_CURRENT_TEXT+' 2: '+shorten(data['I2'])+' мА (raw '+str(data.get('I2_raw', ''))+')')
             window['-DateTime-'].update(data['datetime'].strftime('%d-%m-%Y %H:%M:%S:%f')[:-3])
             window['-TTerm1-'].update('T терм 1: '+shorten(data['Temp_Ext_1'])+' C')
             window['-TTerm2-'].update('T терм 2: '+shorten(data['Temp_Ext_2'])+' C')
@@ -465,5 +543,3 @@ if __name__ == "__main__":
     window.close()
     
     dev.close_connection(prt)
-
-

device_commands.py

@@ -1,7 +1,7 @@
 from enum import IntEnum
 from serial import Serial
 from serial.tools import list_ports
-from . import device_conversion as cnv
+import device_conversion as cnv
 from datetime import datetime
 
 #### ---- Constants
@@ -10,6 +10,28 @@ GET_DATA_TOTAL_LENGTH = 30 # Total number of bytes when getting DATA
 SEND_PARAMS_TOTAL_LENGTH = 30 # Total number of bytes when sending parameters
 TASK_ENABLE_COMMAND_LENGTH = 32 # Total number of bytes when sending TASK_ENABLE command
 
+AD9102_CMD_TOTAL_LENGTH = 10 # Total bytes when sending AD9102 saw command
+AD9102_CMD_HEADER = "8888"
+AD9833_CMD_TOTAL_LENGTH = 10 # Total bytes when sending AD9833 command
+AD9833_CMD_HEADER = "9999"
+DS1809_CMD_TOTAL_LENGTH = 10 # Total bytes when sending DS1809 UC/DC pulse command
+DS1809_CMD_HEADER = "AAAA"
+AD9102_SAW_STEP_DEFAULT = 1
+AD9102_PAT_PERIOD_DEFAULT = 0xFFFF
+AD9102_PAT_PERIOD_BASE_DEFAULT = 0x02
+AD9102_DAC_CLK_HZ = None  # set to actual DAC clock if you want freq->SAW_STEP conversion
+AD9102_FLAG_SRAM = 0x0004
+AD9102_FLAG_SRAM_FMT = 0x0008
+AD9102_SRAM_SAMPLES_DEFAULT = 16
+AD9102_SRAM_HOLD_DEFAULT = 1
+AD9102_SRAM_AMP_DEFAULT = 8191
+AD9833_FLAG_ENABLE = 0x0001
+AD9833_FLAG_TRIANGLE = 0x0002
+AD9833_MCLK_HZ_DEFAULT = 25_000_000
+DS1809_FLAG_UC = 0x0001
+DS1809_FLAG_DC = 0x0002
+DS1809_PULSE_MS_DEFAULT = 2
+
 class TaskType(IntEnum):
     Manual                = 0x00
     ChangeCurrentLD1      = 0x01
@@ -148,26 +170,51 @@ def send_STATE(prt):
     pass
 
 
+def send_AD9102(prt, bytestring):
+    ''' Start/stop AD9102 output with saw/triangle (0x8888 + ...).
+        Expected device answer: STATE.
+    '''
+    if len(bytestring) != AD9102_CMD_TOTAL_LENGTH:
+        print("Error. Wrong parameter string for AD9102 command.")
+        return None
+    prt.write(bytestring)
+    print("Sent: AD9102 ramp command.")
+
+
+def send_AD9833(prt, bytestring):
+    ''' Start/stop AD9833 output with triangle (0x9999 + ...).
+        Expected device answer: STATE.
+    '''
+    if len(bytestring) != AD9833_CMD_TOTAL_LENGTH:
+        print("Error. Wrong parameter string for AD9833 command.")
+        return None
+    prt.write(bytestring)
+    print("Sent: AD9833 ramp command.")
+
+
+def send_DS1809(prt, bytestring):
+    ''' Pulse DS1809 UC/DC control lines (0xAAAA + ...).
+        Expected device answer: STATE.
+    '''
+    if len(bytestring) != DS1809_CMD_TOTAL_LENGTH:
+        print("Error. Wrong parameter string for DS1809 command.")
+        return None
+    prt.write(bytestring)
+    print("Sent: DS1809 pulse command.")
+
+
 # ---- Getting data
 
 
 def get_STATE(prt):
     ''' Get decoded state of the device in byte format (2 bytes).
     '''
-    import time
 
-    # Wait a bit more if data hasn't arrived yet
+    print("Received "+str(prt.inWaiting())+" bytes.")
-    waiting_bytes = prt.inWaiting()
+    if prt.inWaiting()!=2:
-    if waiting_bytes != 2:
+        print("Error. Couldn't get STATE data. prt.inWaiting():", prt.inWaiting())
-        # Give device a bit more time to respond
+        print("Flushing input data:", prt.read(prt.inWaiting()))        
-        time.sleep(0.05)
+        # print("Flushing input data:", prt.read(2), prt.read(2))
-        waiting_bytes = prt.inWaiting()
-
-    print("Received "+str(waiting_bytes)+" bytes.")
-    if waiting_bytes != 2:
-        print("Error. Couldn't get STATE data. prt.inWaiting():", waiting_bytes)
-        if waiting_bytes > 0:
-            print("Flushing input data:", prt.read(waiting_bytes))
         return None
 
     out_bytes = prt.read(2)
@@ -270,6 +317,183 @@ def create_TaskEnableCommand(sending_param):
 
     return bytearray.fromhex(data)
 
+
+
+def calc_saw_step_for_freq(freq_hz: float, dac_clk_hz: float, triangle: bool):
+    if freq_hz <= 0 or dac_clk_hz is None or dac_clk_hz <= 0:
+        return AD9102_SAW_STEP_DEFAULT
+    n = 2 if triangle else 1
+    step = int(round(dac_clk_hz / (freq_hz * n * 16384.0)))
+    if step < 1:
+        step = 1
+    if step > 63:
+        step = 63
+    return step
+
+
+def calc_pat_period_for_duty(saw_step: int, duty: float, pat_period_base: int, triangle: bool):
+    if duty is None or duty <= 0 or duty > 1.0:
+        return AD9102_PAT_PERIOD_DEFAULT
+    n = 2 if triangle else 1
+    base_cycles = 16 if pat_period_base == 0 else pat_period_base
+    ramp_cycles = n * 16384 * max(1, min(63, saw_step))
+    pat_period = int(round(ramp_cycles / (duty * base_cycles)))
+    if pat_period < 1:
+        pat_period = 1
+    if pat_period > 0xFFFF:
+        pat_period = 0xFFFF
+    return pat_period
+
+def calc_sram_samples_for_freq(freq_hz: float, dac_clk_hz: float, hold: int = None):
+    if hold is None or hold <= 0:
+        hold = AD9102_SRAM_HOLD_DEFAULT
+    if freq_hz is None or freq_hz <= 0 or dac_clk_hz is None or dac_clk_hz <= 0:
+        return AD9102_SRAM_SAMPLES_DEFAULT
+    samples = int(round(dac_clk_hz / (freq_hz * hold)))
+    if samples < 2:
+        samples = 2
+    if samples > 4096:
+        samples = 4096
+    return samples
+
+
+
+def create_AD9102_ramp_command(saw_step: int = None,
+                               pat_period: int = None,
+                               pat_period_base: int = None,
+                               enable: bool = True,
+                               triangle: bool = True,
+                               sram_mode: bool = False,
+                               sram_samples: int = None,
+                               sram_hold: int = None,
+                               sram_amplitude: int = None):
+    flags = 0
+    if enable:
+        flags |= 0x0001
+    if triangle:
+        flags |= 0x0002
+    if sram_mode:
+        flags |= AD9102_FLAG_SRAM
+
+    if sram_mode:
+        flags |= AD9102_FLAG_SRAM_FMT
+        if sram_samples is None:
+            sram_samples = AD9102_SRAM_SAMPLES_DEFAULT
+        if sram_samples < 2:
+            sram_samples = 2
+        if sram_samples > 4096:
+            sram_samples = 4096
+        if sram_amplitude is None:
+            sram_amplitude = AD9102_SRAM_AMP_DEFAULT
+        if sram_amplitude < 0:
+            sram_amplitude = 0
+        if sram_amplitude > AD9102_SRAM_AMP_DEFAULT:
+            sram_amplitude = AD9102_SRAM_AMP_DEFAULT
+        param0 = int(sram_amplitude) & 0xFFFF
+        param1 = int(sram_samples) & 0xFFFF
+    else:
+        if saw_step is None:
+            saw_step = AD9102_SAW_STEP_DEFAULT
+        if pat_period is None:
+            pat_period = AD9102_PAT_PERIOD_DEFAULT
+        if pat_period_base is None:
+            pat_period_base = AD9102_PAT_PERIOD_BASE_DEFAULT
+        if saw_step < 1:
+            saw_step = 1
+        if saw_step > 63:
+            saw_step = 63
+        if pat_period < 0:
+            pat_period = 0
+        if pat_period > 0xFFFF:
+            pat_period = 0xFFFF
+        if pat_period_base < 0:
+            pat_period_base = 0
+        if pat_period_base > 0x0F:
+            pat_period_base = 0x0F
+        param0 = ((pat_period_base & 0x0F) << 8) | (saw_step & 0xFF)
+        param1 = pat_period
+
+    crc_word = flags ^ param0 ^ param1
+
+    data = flipfour(AD9102_CMD_HEADER)  # Word 0 (header)
+    data += flipfour(int_to_hex(flags))
+    data += flipfour(int_to_hex(param0))
+    data += flipfour(int_to_hex(param1))
+    data += flipfour(int_to_hex(crc_word))
+
+    return bytearray.fromhex(data)
+
+
+def create_AD9833_ramp_command(freq_hz: float,
+                               mclk_hz: float = None,
+                               enable: bool = True,
+                               triangle: bool = True):
+    if mclk_hz is None or mclk_hz <= 0:
+        mclk_hz = AD9833_MCLK_HZ_DEFAULT
+    if mclk_hz is None or mclk_hz <= 0 or freq_hz is None or freq_hz < 0:
+        freq_word = 0
+    else:
+        freq_word = int(round((freq_hz * (1 << 28)) / float(mclk_hz)))
+    if freq_word < 0:
+        freq_word = 0
+    if freq_word > 0x0FFFFFFF:
+        freq_word = 0x0FFFFFFF
+
+    lsw = freq_word & 0x3FFF
+    msw = (freq_word >> 14) & 0x3FFF
+
+    flags = 0
+    if enable:
+        flags |= AD9833_FLAG_ENABLE
+    if triangle:
+        flags |= AD9833_FLAG_TRIANGLE
+
+    crc_word = flags ^ lsw ^ msw
+
+    data = flipfour(AD9833_CMD_HEADER)  # Word 0 (header)
+    data += flipfour(int_to_hex(flags))
+    data += flipfour(int_to_hex(lsw))
+    data += flipfour(int_to_hex(msw))
+    data += flipfour(int_to_hex(crc_word))
+
+    return bytearray.fromhex(data)
+
+
+def create_DS1809_pulse_command(uc: bool = False,
+                                dc: bool = False,
+                                count: int = 1,
+                                pulse_ms: int = None):
+    flags = 0
+    if uc:
+        flags |= DS1809_FLAG_UC
+    if dc:
+        flags |= DS1809_FLAG_DC
+
+    if count is None or count <= 0:
+        count = 1
+    if count > 64:
+        count = 64
+
+    if pulse_ms is None:
+        pulse_ms = DS1809_PULSE_MS_DEFAULT
+    if pulse_ms < 1:
+        pulse_ms = 1
+    if pulse_ms > 500:
+        pulse_ms = 500
+
+    param0 = int(count) & 0xFFFF
+    param1 = int(pulse_ms) & 0xFFFF
+    crc_word = flags ^ param0 ^ param1
+
+    data = flipfour(DS1809_CMD_HEADER)  # Word 0 (header)
+    data += flipfour(int_to_hex(flags))
+    data += flipfour(int_to_hex(param0))
+    data += flipfour(int_to_hex(param1))
+    data += flipfour(int_to_hex(crc_word))
+
+    return bytearray.fromhex(data)
+
+
 def encode_Input(params):
 
     if params is None:
@@ -303,24 +527,38 @@ def encode_Input(params):
 
 def decode_STATE(state):
     st = flipfour(state)
-    if st == '0000':
+    if st is None or len(st) != 4:
+        return "Error: invalid STATE length."
+
+    hi = int(st[0:2], 16)
+    lo = int(st[2:4], 16)
+
+    errors = []
+    if lo & 0x01:
+        errors.append("SD Card reading/writing error (SD_ERR)")
+    if lo & 0x02:
+        errors.append("Command error (UART_ERR)")
+    if lo & 0x04:
+        errors.append("Wrong parameter value error (UART_DECODE_ERR)")
+    if lo & 0x08:
+        errors.append("Laser 1: TEC driver overheat (TEC1_ERR)")
+    if lo & 0x10:
+        errors.append("Laser 2: TEC driver overheat (TEC2_ERR)")
+    if lo & 0x20:
+        errors.append("Resetting system error (DEFAULT_ERR)")
+    if lo & 0x40:
+        errors.append("File deletion error (REMOVE_ERR)")
+    if lo & 0x80:
+        errors.append("AD9102 status check failed (AD9102_ERR)")
+
+    if not errors:
         status = "All ok."
-    elif st == '0001':
-        status = "SD Card reading/writing error (SD_ERR)."
-    elif st == '0002':
-        status = "Command error (UART_ERR)."
-    elif st == '0004':
-        status = "Wrong parameter value error (UART_DECODE_ERR)."
-    elif st == '0008':
-        status = "Laser 1: TEC driver overheat (TEC1_ERR)."
-    elif st == '0010':
-        status = "Laser 2: TEC driver overheat (TEC2_ERR)."
-    elif st == '0020':
-        status = "Resetting system error (DEFAULT_ERR)."
-    elif st == '0040':
-        status = "File deletion error (REMOVE_ERR)."
     else:
-        status = "Unknown or reserved error."
+        status = "; ".join(errors)
+
+    if hi != 0:
+        status += f" | AD9102_PAT_STATUS=0x{hi:02X}"
+
     return status
 
 
@@ -333,8 +571,12 @@ def decode_DATA(dh):
     data = {}
     data['datetime']   = datetime.now()
     data['Header']     = get_word(dh, 0)
-    data['I1']         = cnv.conv_I_N_to_mA(get_int_word(dh, 1)) #LD1_param.POWER
+    i1_raw = get_int_word(dh, 1)
-    data['I2']         = cnv.conv_I_N_to_mA(get_int_word(dh, 2)) #LD2_param.POWER
+    i2_raw = get_int_word(dh, 2)
+    data['I1_raw']     = i1_raw
+    data['I2_raw']     = i2_raw
+    data['I1']         = cnv.conv_I_N_to_mA(i1_raw) #LD1_param.POWER
+    data['I2']         = cnv.conv_I_N_to_mA(i2_raw) #LD2_param.POWER
     data['TO_LSB']     = get_int_word(dh, 3) #TO6_counter_LSB
     data['TO_MSB']     = get_int_word(dh, 4) #TO6_counter_MSB
     data['Temp_1']     = cnv.conv_T_N_to_C(get_int_word(dh, 5)) #LD1_param.LD_CURR_TEMP
@@ -349,7 +591,3 @@ def decode_DATA(dh):
     data['CRC']        = get_word(dh, 14)
 
     return data
-
-
-
-

device_conversion.py

@@ -13,7 +13,7 @@ R4 = 30000 # Ohm
 R5 = 27000 # Ohm
 R6 = 56000 # Ohm
 
-RREF = 10 # Ohm (current-setting resistor) @1550 nm - 28.7 Ohm; @840 nm - 10 Ohm
+RREF = 30 # Ohm (current-setting resistor) @1550 nm - 28.7 Ohm; @840 nm - 10 Ohm
 
 R7 = 22000 # Ohm
 R8 = 22000 # Ohm

device_interaction.py

@@ -3,7 +3,7 @@
 import time
 
 from datetime import datetime
-from . import device_commands as cmd
+import device_commands as cmd
 
 
 #### ---- Constants
@@ -68,41 +68,20 @@ def create_port_connection():
 
 def reset_port_settings(prt):
     # Reset port settings and check status
-    # First, flush any pending data in the input buffer
-    if prt.inWaiting() > 0:
-        flushed = prt.read(prt.inWaiting())
-        print(f"Flushed {len(flushed)} bytes before reset: {flushed.hex()}")
-
     cmd.send_DEFAULT_ENABLE(prt)
-
+    time.sleep(WAIT_AFTER_SEND)
-    # Try multiple times with increasing delays to get response
+    status = cmd.get_STATE(prt).hex()
-    max_attempts = 3
+    if status is not None:
-    for attempt in range(max_attempts):
-        wait_time = WAIT_AFTER_SEND * (attempt + 1)  # Increase wait time with each attempt
-        time.sleep(wait_time)
-
-        status_bytes = cmd.get_STATE(prt)
-        if status_bytes is not None:
-            status = status_bytes.hex()
         print("Received: STATE. State status:", cmd.decode_STATE(status), "("+cmd.flipfour(status)+")")
         print("")
-            return  # Success
-
-        if attempt < max_attempts - 1:
-            print(f"Attempt {attempt + 1} failed, retrying with longer delay...")
-
-    # If all attempts failed, print warning but don't raise exception
-    print("Warning: Could not get STATE response after reset, but device may still be reset.")
-    print("")
 
 
 def request_state(prt):
     # Request data
     cmd.send_STATE(prt)
     time.sleep(WAIT_AFTER_SEND)
-    status_bytes = cmd.get_STATE(prt)
+    status = cmd.get_STATE(prt).hex()
-    if status_bytes is not None:
+    if status is not None:
-        status = status_bytes.hex()
         print("Received: STATE. State status:", cmd.decode_STATE(status), "("+cmd.flipfour(status)+")")
         print("")
 
@@ -112,9 +91,8 @@ def send_control_parameters(prt, params):
     hexstring = cmd.encode_Input(params)
     cmd.send_DECODE_ENABLE(prt,hexstring)
     time.sleep(WAIT_AFTER_SEND)
-    status_bytes = cmd.get_STATE(prt)
+    status = cmd.get_STATE(prt).hex()
-    if status_bytes is not None:
+    if status is not None:
-        status = status_bytes.hex()
         print("Received: STATE. State status:", cmd.decode_STATE(status), "("+cmd.flipfour(status)+")")
         print("")
     else:
@@ -125,22 +103,86 @@ def send_task_command(prt, sending_param):
     hexstring = cmd.create_TaskEnableCommand(sending_param)
     cmd.send_TASK_ENABLE(prt,hexstring)
     time.sleep(WAIT_AFTER_SEND)
-    status_bytes = cmd.get_STATE(prt)
+    status = cmd.get_STATE(prt).hex()
-    if status_bytes is not None:
+    if status is not None:
-        status = status_bytes.hex()
         print("Received: STATE. State status:", cmd.decode_STATE(status), "("+cmd.flipfour(status)+")")
         print("")
     else:
         print("")
 
+
+
+def start_ramp_max(prt, freq_hz=None, duty=None, saw_step=None, pat_period=None, pat_period_base=None, dac_clk_hz=None, triangle=True, sram_mode=False, sram_samples=None, sram_hold=None, sram_amplitude=None):
+    # Start AD9102 sawtooth with configurable frequency/duty or SRAM ramp mode
+    if sram_mode:
+        if sram_hold is None:
+            sram_hold = cmd.AD9102_SRAM_HOLD_DEFAULT
+        if sram_samples is None and freq_hz is not None:
+            if dac_clk_hz is None:
+                dac_clk_hz = cmd.AD9102_DAC_CLK_HZ
+            sram_samples = cmd.calc_sram_samples_for_freq(freq_hz, dac_clk_hz, sram_hold)
+        hexstring = cmd.create_AD9102_ramp_command(enable=True, triangle=triangle, sram_mode=True,
+                                                  sram_samples=sram_samples, sram_hold=sram_hold,
+                                                  sram_amplitude=sram_amplitude)
+    else:
+        if pat_period_base is None:
+            pat_period_base = cmd.AD9102_PAT_PERIOD_BASE_DEFAULT
+        if saw_step is None and freq_hz is not None:
+            if dac_clk_hz is None:
+                dac_clk_hz = cmd.AD9102_DAC_CLK_HZ
+            saw_step = cmd.calc_saw_step_for_freq(freq_hz, dac_clk_hz, triangle)
+        if saw_step is None:
+            saw_step = cmd.AD9102_SAW_STEP_DEFAULT
+        if pat_period is None and duty is not None:
+            pat_period = cmd.calc_pat_period_for_duty(saw_step, duty, pat_period_base, triangle)
+        if pat_period is None:
+            pat_period = cmd.AD9102_PAT_PERIOD_DEFAULT
+        hexstring = cmd.create_AD9102_ramp_command(saw_step, pat_period, pat_period_base,
+                                                  enable=True, triangle=triangle)
+    cmd.send_AD9102(prt, hexstring)
+    time.sleep(WAIT_AFTER_SEND)
+    status = cmd.get_STATE(prt).hex()
+    if status is not None:
+        print("Received: STATE. State status:", cmd.decode_STATE(status), "("+cmd.flipfour(status)+")")
+        print("")
+    else:
+        print("")
+
+
+def start_ad9833_ramp(prt, freq_hz=None, mclk_hz=None, triangle=True, enable=True):
+    if freq_hz is None:
+        freq_hz = 0.0
+    hexstring = cmd.create_AD9833_ramp_command(freq_hz=freq_hz, mclk_hz=mclk_hz,
+                                               enable=enable, triangle=triangle)
+    cmd.send_AD9833(prt, hexstring)
+    time.sleep(WAIT_AFTER_SEND)
+    status = cmd.get_STATE(prt).hex()
+    if status is not None:
+        print("Received: STATE. State status:", cmd.decode_STATE(status), "("+cmd.flipfour(status)+")")
+        print("")
+    else:
+        print("")
+
+
+def send_ds1809_pulse(prt, uc=False, dc=False, count=1, pulse_ms=None):
+    hexstring = cmd.create_DS1809_pulse_command(uc=uc, dc=dc, count=count, pulse_ms=pulse_ms)
+    cmd.send_DS1809(prt, hexstring)
+    time.sleep(WAIT_AFTER_SEND)
+    status = cmd.get_STATE(prt).hex()
+    if status is not None:
+        print("Received: STATE. State status:", cmd.decode_STATE(status), "("+cmd.flipfour(status)+")")
+        print("")
+    else:
+        print("")
+
+
 def request_data(prt):
     # Request data
     cmd.send_TRANS_ENABLE(prt)
     time.sleep(WAIT_AFTER_SEND)
-    data_bytes = cmd.get_DATA(prt)
+    data = cmd.get_DATA(prt).hex()
     data_dict = []
-    if data_bytes is not None:
+    if data is not None:
-        data = data_bytes.hex()
         data_dict = cmd.decode_DATA(data)
     return data_dict
 

gui.py

@@ -38,6 +38,27 @@ SET_TEXT_WIDTH_NEW = 40
 SET_START_BUTTON_TEXT = 'Пуск'
 SET_STOP_BUTTON_TEXT = 'Стоп'
 
+SET_RAMP_BUTTON_TEXT = 'Пила'
+SET_RAMP_SECTION_TEXT = 'Настройка пилы (AD9102)'
+SET_RAMP_FREQ_TEXT = 'Частота (Гц):'
+SET_RAMP_DUTY_TEXT = 'Скважность (%):'
+SET_RAMP_SAWSTEP_TEXT = 'SAW_STEP (1-63):'
+SET_RAMP_PATPERIOD_TEXT = 'PAT_PERIOD (1-65535):'
+SET_RAMP_PATBASE_TEXT = 'PAT_PERIOD_BASE (0-15):'
+SET_RAMP_DACCLK_TEXT = 'DAC clk (МГц):'
+SET_RAMP_TRI_TEXT = 'Треугольник'
+SET_RAMP_SRAM_MODE_TEXT = 'SRAM режим'
+SET_RAMP_SRAM_SAMPLES_TEXT = 'SRAM точки (samples):'
+SET_RAMP_SRAM_AMP_TEXT = 'SRAM амплитуда (%):'
+SET_AD9833_SECTION_TEXT = 'Настройка пилы (AD9833)'
+SET_AD9833_FREQ_TEXT = 'Частота AD9833 (Гц):'
+SET_AD9833_MCLK_TEXT = 'MCLK AD9833 (МГц):'
+SET_AD9833_TRI_TEXT = 'Треугольник AD9833'
+SET_AD9833_BUTTON_TEXT = 'Пила AD9833'
+SET_DS1809_SECTION_TEXT = 'DS1809 (UC/DC)'
+SET_DS1809_UC_BUTTON_TEXT = 'UC импульс'
+SET_DS1809_DC_BUTTON_TEXT = 'DC импульс'
+
 
 GRAPH_POINTS_NUMBER = 100 # Number of most recent data points shown on charts
 GRAPH_CANVAS_SIZE = (0, 0)
@@ -58,6 +79,12 @@ H_SEPARATOR_PAD = (1, 20)
 OUTPUT_TEXT_PAD = (5, (20, 5))
 WINDOW_MARGIN = (60, 90)
 MIN_WINDOW_SIZE = (880, 660)
+SETTINGS_PANEL_MIN_HEIGHT = 320
+SETTINGS_PANEL_HEIGHT_MARGIN = 230
+SETTINGS_PANEL_MIN_WIDTH = 320
+SETTINGS_PANEL_WIDTH_COMPACT = 420
+SETTINGS_PANEL_WIDTH_WIDE = 480
+SETTINGS_PANEL_WIDTH_MARGIN = 60
 
 
 #### ---- Setting GUI
@@ -70,40 +97,56 @@ def get_screen_size():
     screen_width, screen_height = window.get_screen_size()
     window.close()
 
-    COMPACT_LAYOUT = True
+    COMPACT_LAYOUT = screen_width <= 1280 or screen_height <= 800
 
     margin_w, margin_h = WINDOW_MARGIN
     min_w, min_h = MIN_WINDOW_SIZE
 
     window_width = min(screen_width, max(min_w, screen_width - margin_w))
-    window_height = min(screen_height, max(min_h, screen_height - margin_h))//2
+    window_height = min(screen_height, max(min_h, screen_height - margin_h))
     WINDOW_SIZE = (window_width, window_height)
 
     if COMPACT_LAYOUT:
         SET_TEXT_WIDTH = 30
         SET_TEXT_WIDTH_NEW = 34
-        graph_width = min(int(screen_width / 7.2), int(window_width / 5.6))
+        graph_width = min(int(screen_width / 3.6), int(window_width / 3.1))
-        graph_height = max(90, int(screen_height / 16))
+        graph_height = max(110, int(screen_height / 6.5))
-        H_SEPARATOR_PAD = (1, 8)
+        H_SEPARATOR_PAD = (1, 12)
-        OUTPUT_TEXT_PAD = (5, (8, 3))
+        OUTPUT_TEXT_PAD = (5, (12, 5))
     else:
         SET_TEXT_WIDTH = 34
         SET_TEXT_WIDTH_NEW = 40
-        graph_width = int(screen_width / 4)
+        graph_width = int(screen_width / 3.5)
-        graph_height = int(screen_width / (3 * 3.5))
+        graph_height = int(screen_width / (3 * 2.75))
-        H_SEPARATOR_PAD = (1, 15)
+        H_SEPARATOR_PAD = (1, 20)
-        OUTPUT_TEXT_PAD = (5, (15, 5))
+        OUTPUT_TEXT_PAD = (5, (20, 5))
 
-    graph_width = max(180, graph_width)
+    graph_width = max(220, graph_width)
     GRAPH_CANVAS_SIZE = (graph_width, graph_height)
 
     return WINDOW_SIZE
 
+def get_settings_panel_size(window_size):
+    window_width, window_height = window_size
+    desired_width = SETTINGS_PANEL_WIDTH_COMPACT if COMPACT_LAYOUT else SETTINGS_PANEL_WIDTH_WIDE
+    available_width = window_width - (GRAPH_CANVAS_SIZE[0] * 2) - SETTINGS_PANEL_WIDTH_MARGIN
+
+    if available_width > 0:
+        width = min(desired_width, available_width)
+        if available_width >= SETTINGS_PANEL_MIN_WIDTH:
+            width = max(width, SETTINGS_PANEL_MIN_WIDTH)
+    else:
+        width = desired_width
+
+    height = max(SETTINGS_PANEL_MIN_HEIGHT, window_height - SETTINGS_PANEL_HEIGHT_MARGIN)
+    return (int(width), int(height))
+
 def setup_gui(params):
 
     sg.theme("DarkBlue12")
 
     window_size = get_screen_size()
+    settings_panel_size = get_settings_panel_size(window_size)
 
     layout_input_col1 = [[sg.Text(SET_TEMPERATURE_TEXT_1, size=(SET_TEXT_WIDTH, 1)), sg.Push(),
                           sg.Input(params['Temp_1'], disabled_readonly_background_color="Gray", size=(SET_INPUT_WIDTH,1), key='-InputT1-', disabled = True)],
@@ -195,12 +238,65 @@ def setup_gui(params):
                         [sg.Text(SET_TAU_T_TEXT, size=(SET_TEXT_WIDTH_NEW,1)), 
                             sg.Input(params['Tau'], size=(SET_INPUT_WIDTH,1), key='-InputTau-', disabled=True, disabled_readonly_background_color="Gray")],
                         
+                        [sg.Text(SET_RAMP_SECTION_TEXT, size=(SET_TEXT_WIDTH_NEW,1))],
+
+                        [sg.Text(SET_RAMP_FREQ_TEXT, size=(SET_TEXT_WIDTH_NEW,1)),
+                            sg.Input(params.get('RampFreq', ''), size=(SET_INPUT_WIDTH,1), key='-RampFreq-')],
+
+                        [sg.Text(SET_RAMP_DUTY_TEXT, size=(SET_TEXT_WIDTH_NEW,1)),
+                            sg.Input(params.get('RampDuty', ''), size=(SET_INPUT_WIDTH,1), key='-RampDuty-')],
+
+                        [sg.Text(SET_RAMP_SAWSTEP_TEXT, size=(SET_TEXT_WIDTH_NEW,1)),
+                            sg.Input(params.get('RampSawStep', ''), size=(SET_INPUT_WIDTH,1), key='-RampSawStep-')],
+
+                        [sg.Text(SET_RAMP_PATPERIOD_TEXT, size=(SET_TEXT_WIDTH_NEW,1)),
+                            sg.Input(params.get('RampPatPeriod', ''), size=(SET_INPUT_WIDTH,1), key='-RampPatPeriod-')],
+
+                        [sg.Text(SET_RAMP_PATBASE_TEXT, size=(SET_TEXT_WIDTH_NEW,1)),
+                            sg.Input(params.get('RampPatBase', ''), size=(SET_INPUT_WIDTH,1), key='-RampPatBase-')],
+
+                        [sg.Text(SET_RAMP_DACCLK_TEXT, size=(SET_TEXT_WIDTH_NEW,1)),
+                            sg.Input(params.get('RampDacClk', ''), size=(SET_INPUT_WIDTH,1), key='-RampDacClk-')],
+
+                        [sg.Text(SET_RAMP_TRI_TEXT, size=(SET_TEXT_WIDTH_NEW,1)),
+                            sg.Checkbox('', default=bool(params.get('RampTriangle', True)), key='-RampTriangle-')],
+
+                        [sg.Text(SET_RAMP_SRAM_MODE_TEXT, size=(SET_TEXT_WIDTH_NEW,1)),
+                            sg.Checkbox('', default=bool(params.get('RampSramMode', False)), key='-RampSramMode-')],
+
+                        [sg.Text(SET_RAMP_SRAM_SAMPLES_TEXT, size=(SET_TEXT_WIDTH_NEW,1)),
+                            sg.Input(params.get('RampSramSamples', ''), size=(SET_INPUT_WIDTH,1), key='-RampSramSamples-')],
+
+                        [sg.Text(SET_RAMP_SRAM_AMP_TEXT, size=(SET_TEXT_WIDTH_NEW,1)),
+                            sg.Input(params.get('RampSramAmp', ''), size=(SET_INPUT_WIDTH,1), key='-RampSramAmp-')],
+
                         [sg.HSeparator(pad=H_SEPARATOR_PAD)],
 
-                        [sg.Button(SET_START_BUTTON_TEXT, key='-StartCycle-', disabled_button_color=("Gray22", "Blue"), disabled=True), sg.Button(SET_STOP_BUTTON_TEXT, disabled_button_color=("Gray22", "Blue"), key='-StopCycle-', disabled=True)]]
+                        [sg.Text(SET_AD9833_SECTION_TEXT, size=(SET_TEXT_WIDTH_NEW,1))],
+
+                        [sg.Text(SET_AD9833_FREQ_TEXT, size=(SET_TEXT_WIDTH_NEW,1)),
+                            sg.Input(params.get('Ad9833Freq', ''), size=(SET_INPUT_WIDTH,1), key='-AD9833Freq-')],
+
+                        [sg.Text(SET_AD9833_MCLK_TEXT, size=(SET_TEXT_WIDTH_NEW,1)),
+                            sg.Input(params.get('Ad9833Mclk', ''), size=(SET_INPUT_WIDTH,1), key='-AD9833Mclk-')],
+
+                        [sg.Text(SET_AD9833_TRI_TEXT, size=(SET_TEXT_WIDTH_NEW,1)),
+                            sg.Checkbox('', default=bool(params.get('Ad9833Triangle', True)), key='-AD9833Triangle-')],
+
+                        [sg.HSeparator(pad=H_SEPARATOR_PAD)],
+
+                        [sg.Text(SET_DS1809_SECTION_TEXT, size=(SET_TEXT_WIDTH_NEW,1))],
+
+                        [sg.Button(SET_DS1809_UC_BUTTON_TEXT, key='-DS1809UC-', disabled_button_color=("Gray22", "Blue")),
+                         sg.Button(SET_DS1809_DC_BUTTON_TEXT, key='-DS1809DC-', disabled_button_color=("Gray22", "Blue"))],
+
+                        [sg.HSeparator(pad=H_SEPARATOR_PAD)],
+                        
+                        [sg.Button(SET_START_BUTTON_TEXT, key='-StartCycle-', disabled_button_color=("Gray22", "Blue"), disabled=True), sg.Button(SET_STOP_BUTTON_TEXT, disabled_button_color=("Gray22", "Blue"), key='-StopCycle-', disabled=True), sg.Button(SET_RAMP_BUTTON_TEXT, key='-StartRamp-', disabled_button_color=("Gray22", "Blue")), sg.Button(SET_AD9833_BUTTON_TEXT, key='-StartRamp9833-', disabled_button_color=("Gray22", "Blue"))]]
 
 
-    layout = [[sg.Column(layout_input_col1, pad=(0,0)), sg.VSeparator(pad=(4,0)), sg.Column(layout_input_col2, pad=(0,0)), sg.VSeparator(pad=(4,0)), sg.Column(layout_input_col3, pad=(0,0))],
+    layout = [[sg.Column(layout_input_col1, pad=(0,0)), sg.VSeparator(pad=(4,0)), sg.Column(layout_input_col2, pad=(0,0)), sg.VSeparator(pad=(4,0)),
+               sg.Column(layout_input_col3, pad=(0,0), scrollable=True, vertical_scroll_only=True, size=settings_panel_size, key='-SettingsPanel-', expand_y=True)],
               
               [sg.HSeparator(pad=(25,10))],
               

init_params.json

@@ -1,11 +0,0 @@
-{
-
- {INITIAL_TEMPERATURE_1 = 28 # Set initial temperature for Laser 1 in Celsius: from -1 to 45 C ??
-INITIAL_TEMPERATURE_2 = 28.9 # Set initial temperature for Laser 2 in Celsius: from -1 to 45 C ??
-INITIAL_CURRENT_1 = 33 # 64.0879 max # Set initial current for Laser 1, in mA
-INITIAL_CURRENT_2 = 35 # 64.0879 max # Set initial current for Laser 2, in mA
-
-GUI_TIMEOUT_INTERVAL = 5#505 - dev.WAIT_AFTER_SEND*1000 # GUI refresh time in milliseconds
-
-SAVE_POINTS_NUMBER = 1000 # Number of most recent data points kept in memory
-}

run

@@ -1,7 +1,7 @@
 #!/usr/bin/bash
 #reset generator PCB
-# pinctrl set 26 op dl # drive PCB NRST LOW -> reset stm32
+#pinctrl set 26 op dl # drive PCB NRST LOW -> reset stm32
-# pinctrl set 26 op dh # turn stm32 back ON
+#pinctrl set 26 op dh # turn stm32 back ON
 
 source .venv/bin/activate
 python3 _device_main.py